Hansgrohe SE Approvals


WRAS Approval Number: 1710005

Range of wall mounted spout outlets (brass with various finishes), which also incorporate a plastic aerator. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1710005
  • Expiry date: 31/10/2022
  • Note: Open outlet use only.
  • Size: ¾ “ BSP (M)
  • Marking: Axor logo on base plate
  • Installation Requirements R001 R040
  • Model
    38 411 xxx - Axor Uno 45 410 xxx - Axor Puro Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710006

Wall mounted two hole, single outlet (fixed) combination tap assembly (brass with various finishes) incorporating a ceramic cartridge headworks controlling temperature and flow using a single lever operating member. The assembly also incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710006
  • Expiry date: 31/10/2022
  • Note: Not supplied with a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: AXOR Hansgrohe on top of body
  • Installation Requirements R001 R030
  • Model
    39 400 xxx AXOR Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710007

‘Metris’ three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710007
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on base of spout.
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    31 083 xxx - Metris Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710008

Axor Uno²’ three hole, single outlet (swivel) combination tap assemblies (brass, available in various customised finishes), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1710008
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR & Hansgrohe on base of body.
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    38 053 xxx - Axor Uno² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710009

‘Hansgrohe Metris’ single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710009
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe logo on base of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 087 xxx – Hansgrohe Metris Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710010

Hansgrohe Talis S’ three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with lever operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710010
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on base front of tap spout.
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    72 130 xxx - Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710011

Hansgrohe Logis Monotrou’ single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The assembly also incorporates a self-cancelling diverter to shower outlet. The connection to shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710011
  • Expiry date: 31/10/2022
  • Note: Not supplied with a shower hose and handset.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R030
  • Model
    71 312 xxx - Hansgrohe Logis Monotrou Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710012

Axor Montreux’ range of single hole, single outlet (swivel) combination tap assemblies (brass, in various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator and flow regulator. Model 16 517 xxx is also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710012
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR on front of body. Montreaux on rear of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    16 517 xxx Axor Montreux (with PUW) 16 518 xxx Axor Montreux Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710013

Axor Montreux’ single hole, single outlet (swivel) combination tap assemblies (brass, in various finishes), incorporating a ceramic cartridge headwork and a single lever operating member. The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710013
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR on base of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    16 580 xxx - Axor Montreux Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710014

‘Axor Uno’ range of single hole, single outlet (fixed) combination tap assemblies (brass, in various finishes), incorporating ceramic cartridge headworks, and either single lever (38 models) or dome type (45 models) operating members. The spout outlet incorporates a plastic aerator. Models 38 023 xxx & 45 001 xxx are also supplied with a pop-up waste. Maximum working pressure: 10.0 bar. Maximum operating temperature 60ºC.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710014
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Axor on operating member Uno on back of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    38 021 xxx - Axor Uno 70 38 023 xxx - Axor Uno 100 (with PUW) 38 026 xxx - Axor Uno 100 38 032 xxx - Axor Uno 190 38 034 xxx - Axor Uno 250 45 001 xxx - Axor Uno 110 (with PUW) 45 002 xxx - Axor Uno 110 45 003 xxx - Axor Uno 200 45 004 xxx - Axor Uno 260 45 005 xxx - Axor Uno 80 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710015

‘Hansgrohe Talis’ single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The product is also supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710015
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 080 xxx - Hansgrohe Talis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710016

‘Metris S’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The products incorporate a plastic aerator. Models 31 060 000 and 31 063 000 are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710016
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on handle.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 060 xxx - Metris S 31 063 xxx - Metris S 31 068 xxx - Metris S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710017

‘Hansgrohe Focus’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Models 31 603 000, 31 607 000, 31 608 000, 31 621 000 & 31 911 000 are also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710017
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating either ⅜” or ½” captive nut (31 517 010 only) end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 513 xxx - Hansgrohe Focus 100 LowFlow, 31 517 xxx - Hansgrohe Focus 100, 31 517 xxx - Hansgrohe Focus 100, 31 518 xxx - Hansgrohe Focus 190, 31 603 xxx - Hansgrohe Focus 100 LowFlow, 31 607 xxx - Hansgrohe Focus 100, 31 608 xxx - Hansgrohe Focus 190, 31 621 xxx - Hansgrohe Focus 100 CoolStart & 31 911 xxx - Hansgrohe Focus 100. Models Added February 2018: 31 915 xxx - Hansgrohe Focus 100 & 31 917 xxx - Hansgrohe Focus 100 CoolStart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710019

‘Hansgrohe Talis S’ single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork controlling the flow and temperature with a single lever operating member. The spout outlet incorporates a plastic aerator which also incorporates a flow regulator. Model 32 020 000 is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710019
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 020 xxx - Talis S (with PUW). 32 031 xxx - Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710020

‘Hansgrohe Metris’ range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see model). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710020
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating either ⅜” or ½” (31 084 010 only) captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 080 xxx - Hansgrohe Metris 110 (with PUW), 31 082 xxx - Hansgrohe Metris 260 (with PUW), 31 084 xxx - Hansgrohe Metris 110, 31 084 xxx - Hansgrohe Metris 110 LowPressure, 31 203 xxx - Hansgrohe Metris 110 LowFlow (with PUW), 31 204 xxx - Hansgrohe Metris 110 LowFlow & 31 121 xxx - Hansgrohe Metris 110 CoolStart (with PUW). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710021

‘Axor Starck Classic’ single hole, single outlet (fixed), over the rim bidet combination tap assembly (brass, in various finishes) incorporating ceramic cartridge headwork and joystick type operating member. The spout outlet incorporates a swivel nozzle, with plastic aerator and flow regulator. The product is also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 1710021
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe and AXOR on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    10 200 xxx - AXOR Starck Classic Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710022

‘Hansgrohe Focus S’ and ‘Hansgrohe Talis S’ ranges of single hole, single outlet (swivel), bidet combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlets incorporate a plastic aerator with a built in flow regulator. Models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0410 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single Hole - Metal Single Outlet - Swivel.
  • WRAS Approval Number: 1710022
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on base of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 710 xxx - Hansgrohe Focus S 360° 32 070 xxx - Hansgrohe Talis S 360° 32 073 xxx - HansgroheTalis S 120° Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710023

‘Hansgrohe Metris S’ and ‘Puro’ range of single hole, metal single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. Spout outlets incorporate a plastic aerator. Models 31 161 000 & 31 164 000 are also supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710023
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections
  • Marking: Hansgrohe on base of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 161 xxx - Hansgrohe Metris S 120º 31 164 xxx - Hansgrohe Metris Puro 120º 31 167 xxx - Hansgrohe Metris Puro 120º Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710024

‘Hansgrohe PureVida’ single hole, single outlet (fixed) combination tap assembly (brass, in various finishes), incorporating a ceramic cartridge headwork and joystick operating member. The spout outlet incorporates an aerator. Models are also supplied with either a click type or lever operated (15 074 xxx only) pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710024
  • Expiry date: 31/10/2022
  • Note: No testing performed on lever operated pop-up waste,
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    15 070 xxx - Hansgrohe PureVida 110, 15 072 xxx - Hansgrohe PureVida 110, 15 074 xxx - Hansgrohe PureVida 240, 15 075 xxx - Hansgrohe PuraVida & 15 081 xxx - Hansgrohe PuraVida 200 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710116

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a push on/off headwork with rotary temperature control using a dome type operating member. The inlets hoses incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection . Model 45 010 xxx is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710116
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined hose assembly incorporating ⅜” BSP captive nut end connections.
  • Marking: AXOR on base of tap body
  • Installation Requirements R001 R006 R009
  • Model
    45 010 xxx Axor Puro Select Basin Mixer 110 with pop-up waste, 45 012 xxx Axor Puro Select Basin Mixer 110, 45 013 xxx Axor Puro Select Basin Mixer 200, 45 014 xxx Axor Puro Select Basin Mixer 260 & 45 015 xxx Axor Puro Select Basin Mixer 80 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710018

‘AXOR Starck Classic’ range of single hole, single outlet (fixed) combination tap assemblies (brass in a variety of finishes), incorporating ceramic cartridge headworks and joystick operating members. The spout outlets incorporate a plastic aerator. Models 10 010 xxx & 10 020 xxx are also supplied with a lever type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710018
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe and Axor on base of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    10 010 xxx – AXOR Starck Classic (with PUW), 10 018 xxx – AXOR Starck Classic, 10 020 xxx – AXOR Starck Classic (with PUW) & 10 028 xxx – AXOR Starck Classic. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707030

Range of concealed flow control valves (brass bodies), incorporating either non-rising spindle or ¼ turn ceramic disc (15 974 180 only) headworks. Valve models are for use with trim kits utilising various operating members (see below). Kits are available in various finishes (denoted by xxx). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1707030
  • Expiry date: 31/07/2022
  • Size: 15 974 180 & 15 973 180: ½” BSP (F) 15 970 180: ¾” BSP (F)
  • Marking: 15 974 180, 15 973 180 & 15 970 180 valves: Hansgrohe on body. Trim Kits: Axor and Hansgrohe on body.
  • Installation Requirements R001 R040
  • Model
    Concealed Valves: 15 974 180, 15 973 180 & 15 970 180 Trim Kits: 10 970 xxx Axor Starck (lever), 10 972 xxx Axor Shower (lever), 10 974 xxx Axor Starck X (lever), 11 960 xxx Axor Urquiola (cubed), 12 771 xxx Axor Starck Organic (dome), 16 871 xxx Axor Montreux (cross top), 16 872 xxx Axor Montreux (lever), 17 960 xxx Axor Carlton (lever), 17 965 xxx Axor Carlton (cross top), 18 770 xxx Axor Massaud (dome), 19 971 xxx Axor Bouroullec (dome), 34 960 xxx Axor Citterio M (lever), 34 980 xxx Axor Citterio M (three prong), 36 771 xxx Axor Citterio E (cross top), 38 976 xxx Axor Uno (dome), 39 960 xxx Axor Citterio (lever) & 39 965 xxx Axor Citterio (cross top).
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711063

Range of single hole, single outlet (swivel) combination tap assemblies (chrome or PVD stainless steel optic finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711063
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided PE-X lined flexible hose assembly with 3/8” captive nut end connection.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 820 xxx Hansgrohe Focus Single lever kitchen mixer 260. 73 882 xxx Hansgrohe M41 M411-H260 Single lever kitchen mixer 260. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711064

Range of overhead shower outlets with a brass body (various finishes). The inlets incorporate a flow regulator and stainless steel strainer. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711064
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on body.
  • Model
    27 450 xxx Hansgrohe Croma 160 & 28 450 xxx Hansgrohe Croma 160. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711065

Overhead shower head (chromium plated brass) with optional spray settings. The shower head incorporates EPDM O-rings and metal strainers on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711065
  • Expiry date: 30/11/2022
  • Size: Universal connector for Hansgrohe IBOX 12mm manifold.
  • Marking: Hansgrohe on backing plate
  • Installation Requirements R001 R040
  • Model
    28 411 xxx Hansgrohe Raindance Rainfall 240 Air 3jet overhead shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe S.A.S.
    Company Name
    Hansgrohe S.A.S.
    Address
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711066

Range of showers handsets with plastic bodies (chrome or white/chrome finish), incorporating a stainless steel strainer and flow regulator. Models 28 567 and 26 551 incorporate a multi-function spray setting. Maximum operating temperature 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711066
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe and PuraVida, on body.
  • Installation Requirements R001 R040
  • Model
    28 567 xxx Hansgrohe PuraVida 3jet hand shower EcoSmart 9 l/min. 26 551 xxx Hansgrohe Raindance Select E 150 3jet hand shower EcoSmart 9 l/min. 28 568 xxx Hansgrohe PuraVida 120 Air 1jet baton hand shower EcoSmart 9 l/min. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711067

Range of fixed, ceiling or wall mounted shower outlets with chromium plated brass bodies and EPDM `O` rings. And concealed mounting unit Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711067
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Models 10 924 xxx, 10 925 xxx, 10 929 xxx: hansgrohe and axor logo on body, Model (10921180) Hansgrohe and model on adhesive label
  • Installation Requirements R001 R040
  • Model
    Functional block: 10 921 180 Axor AXOR ShowerCollection Basic set for overhead shower 240/240 1jet with shower arm For use with the following shower outlets: 10 924 xxx AXOR ShowerCollection Overhead shower 240/240 1jet 10 925 xxx AXOR ShowerCollection Overhead shower 240/240 1jet with shower arm 10 929 xxx AXOR ShowerCollection Overhead shower 240/240 1jet with ceiling connector Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711018

‘Axor Montreux’ range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with either single lever (16 535 xxx) or cross top (16 536 xxx) operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1711018
  • Expiry date: 30/11/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided TPSiV lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Axor on base of spout.
  • Installation Requirements R001 R005 R007 R009 R010
  • Model
    Axor Montreux Finish sets: 16 535 xxx & 16 536 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711019

‘Axor Starck’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and joystick operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711019
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Axor and Hansgrohe on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    Axor Starck: 10 123 xxx & 10 129 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711020

‘Hansgrohe Talis’ single hole, single outlet (fixed) combination tap assemblies (brass bodies in various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711020
  • Expiry date: 30/11/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 035 xxx - Hansgrohe Talis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711043

‘Hansgrohe Crometta 85’ range of chromium plated plastic shower outlets, incorporating a stainless steel strainer at the inlets. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711043
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on shower outlet.
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Crometta 85 Range: 28 423 xxx, 28 424 xxx & 28 425 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712020

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712020
  • Expiry date: 31/12/2022
  • Size: Stainless steel braided, PEX lined flexible hoses with 3/8” BSP captive nut end connection.
  • Marking: Axor and Hansgrohe on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    10 822 xxx AXOR Starck Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801300

‘Hansgrohe Metropol’ range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1801300
  • Expiry date: 31/01/2023
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Metropol Range: 32 525 xxx, 74 525 xxx, 32 526 xxx & 74 526 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801302

Single hole, single outlet (fixed) floor mounted combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic cartridge headworks, and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801302
  • Expiry date: 31/01/2023
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Metropol 32 530 xxx & 74 530 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801307

'Metropol' range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator & the products are supplied with click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801307
  • Expiry date: 31/01/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜" captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Metropol Range: 32 502 xxx, 74 502 xxx, 32 503 xxx CoolStart, 32 507 xxx, 74 507 xxx & 32 508 xxx CoolStart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801344

‘Metropol Select’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating detent (push on, push off) type headworks controlling both temperature and flow using a cubed type operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a click type pop-up waste. Maximum operating pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801344
  • Expiry date: 31/01/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009
  • Model
    Hansgrohe ‘Metropol Select’ Range: 32 570 xxx, 32 571 xxx & 32 572 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801345

‘Metropol’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever top operating members. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801345
  • Expiry date: 31/01/2023
  • Size: Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hangrohe ‘Metropol’ Range: 32 500 xxx, 74 500 xxx, 32 506 xxx, 74 506 xxx, 32 512 xxx & 74 512 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801359

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801359
  • Expiry date: 31/01/2023
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 501 xxx Metropol 100 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801013

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator and the products are supplied with a pop-up waste (Hansgrohe Metris S 31 021 xxx & 31 022 xxx models only). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801013
  • Expiry date: 31/01/2023
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Metris S 31 021 xxx, 31 022 xxx, 31 023 xxx & 31 026 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801029

Range of wall mounted, concealed shower mixers (cast brass body) with chrome plated trim sets, incorporating a ceramic cartridge headwork with a single lever operating member. The cartridge incorporates a stainless steel strainer. The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. The I-box model: 01850180 incorporates servicing valves on the inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801029
  • Expiry date: 31/01/2023
  • Note: This approval does not include a shower hose and handset. The I-box 01800180 and 01850180 rough in sets are not approved in their own right.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe logo on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    31 652 xxx Hansgrohe Metris Single lever shower mixer highflow for concealed installation, 32 674 xxx Hansgrohe Talis E Single lever shower mixer highflow for concealed installation, 71 768 xxx Hansgrohe Talis E Single lever shower mixer highflow for concealed installation, 72 607 xxx Hansgrohe Talis S Single lever shower mixer highflow for concealed installation. All of the above are to be installed in conjunction with the I-box rough in sets: 01850180 or 01800180. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801031

Range of wall mounted shower body jets with brass bodies (various finishes). The 28 430 xxx & 28 477 xxx models incorporate a stainless steel strainer on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1801031
  • Expiry date: 31/01/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Axor & Hansgrohe Logo or Hansgrohe Logo on shower body.
  • Installation Requirements R001 R040
  • Model
    28 430 xxx Hansgrohe PuraVida 100 1jet body shower, 28 466 xxx Hansgrohe Bodyvette 1jet body shower, 28 467 xxx Hansgrohe Bodyvette stop 1jet body shower, 28 469 xxx Axor Body shower 1jet Square, 28 477 xxx Hansgrohe Raindance S 100 Air 1jet body shower, 28 464 xxx AXOR Body shower 1jet Round. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801028

Range of concealed thermostatic blending valves with brass bodies (various finishes - see model) and either a single lever, cross top, dome or cube type operating member (depending on model). The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection . The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. Maximum Working Pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1801028
  • Expiry date: 31/01/2023
  • Note: The I-box 01800180 rough in set is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe or Axor on face plate.
  • Installation Requirements R001 R040
  • Model
    15 741 xxx Hansgrohe ShowerSelect S Highflow thermostatic mixer for concealed installation, 15 715 xxx Hansgrohe Ecostat S Highflow thermostatic mixer for concealed installation, 31 571 xxx Hansgrohe Metris Highflow thermostatic mixer for concealed installation, 15 734 xxx Hansgrohe ShowerSelect Glass thermostatic mixer highflow for concealed installation, 15 734 xxx Hansgrohe ShowerSelect Glass thermostatic mixer highflow for concealed installation, 15 772 xxx Hansgrohe PuraVida Highflow thermostatic mixer for concealed installation, 15 760 xxx Hansgrohe ShowerSelect Thermostat highflow for concealed installation, 38 715 xxx Axor Uno Highflow thermostatic mixer for concealed installation, 36 711 xxx Axor ShowerSelect Soft thermostatic mixer highflow for concealed installation, 10 715 xxx Axor Starck Highflow thermostatic mixer for concealed installation, 10 717 xxx Axor Starck X Highflow thermostatic mixer for concealed installation, 12 711 xxx Axor Starck Organic Highflow thermostatic mixer for concealed installation, 11 731 xxx Axor Urquiola Highflow thermostatic mixer for concealed installation, 17 712 xxx Axor Carlton Highflow thermostatic mixer for concealed Installation with lever handle, 17 716 xxx Axor Carlton Highflow thermostatic mixer for concealed installation with cross handle, 36 718 xxx Axor ShowerSelect Square Highflow thermostatic mixer for concealed installation, 36 721 xxx Axor ShowerSelect Round thermostatic mixer highflow for concealed installation, 16 815 xxx Axor Montreux Highflow thermostatic mixer for concealed installation, 34 716 xxx Axor Citterio M Highflow thermostatic mixer for concealed installation, 39 711 xxx Axor Citterio Highflow thermostatic mixer for concealed installation with lever handle, 39 716 xxx Axor Citterio Highflow thermostatic mixer for concealed installation with cross handle, 18 741 xxx Axor Massaud Highflow thermostatic mixer for concealed installation, 19 702 xxx Axor Bouroullec Highflow thermostatic mixer for concealed installation, 15 706 xxx Hansgrohe Ecostat E Thermostatic mixer highflow for concealed installation, 15 756 xxx Hansgrohe Ecostat S Thermostatic mixer highflow for concealed Installation, 16 824 xxx Axor Montreux Thermostatic mixer highflow with lever handle for concealed installation. All of the above are to be installed in conjunction with the rough in set: 01800180. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801030

Concealed manual (shower) blending valve with a brass body and chrome plated trim set, incorporating a ceramic cartridge headwork with a single lever operating member. The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801030
  • Expiry date: 31/01/2023
  • Note: This approval does not include a shower hose and handset. The I-box 01800180 rough in set is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    31 365 xxx (Metropol Classic) which must be installed in conjunction with the I-box 01800180 rough in set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804004

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1804004
  • Expiry date: 30/04/2023
  • Size: Stainless steel braided PEX lined hoses incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe Logo on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    73 865 xxx M52 M521-H270 Single lever kitchen mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810705

Axor Starck shower shut-off valve basic set, incorporating non rising spindle headwork with DZR brass body and EPDM seals. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 1810705
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (F) inlets. ½” and ¾” BSP (F) outlets.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    10 971 180 Axor Shower Collection Basic set for shut-off valve 120/120 for concealed installation
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with a range of single lever operating members. The cold-water pathway incorporates a diverter valve, situated at the bottom of the tap body which diverts the flow to an optional outlet that is intended to supply appliances. The spout outlets incorporate a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801014
  • Expiry date: 31/01/2023
  • Note: These products incorporate an additional cold-water outlet that is intended to supply appliances. Appropriate backflow prevention must be installed at the point of connection to any appliance installed.
  • Size: Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe logo on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 803 xxx - Hansgrohe Focus & 73 887 xxx - Hansgrohe M414-H160.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805324

Hansgrohe ‘Metropol’ range of wall mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks with single lever operating members. The products incorporate a self-cancelling diverter to shower outlet and a plastic aerator in the spout outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1805324
  • Expiry date: 31/05/2023
  • Note: Not supplied with a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    Hansgrohe Metropol 32 540 xxx & 74 540 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805022

Hansgrohe ‘Raindance’ & ‘Croma 280’ ranges of overhead shower outlets (brass bodies – in various finishes). The inlets incorporate a plastic flow regulator. Models 27 474 xxx & 27 477 xxx are also supplied with a shower arm. Model 26 221 xxx also incorporates a stainless-steel strainer. All other models incorporate a plastic strainer. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805022
  • Expiry date: 31/05/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M) (Raindance models) & ½” BSP (F) (Croma models).
  • Marking: ‘Hansgrohe’ on side of showerhead
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Raindance: 27 474 xxx & 27 477 xxx. Hansgrohe Croma: 26 220 xxx & 26 221 xxx (EcoSmart) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805023

‘Axor Starck’ range of hand showers with plastic bodies – in various finishes. The products incorporate a stainless-steel strainer and integral flow regulator. Models 28 532 xxx & 12 680 xxx have a multi-function spray pattern utilising a plastic aerator. Maximum operating temperature: 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805023
  • Expiry date: 31/05/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe & Axor on handset
  • Installation Requirements R001 R040
  • Model
    Axor Starck Range: 10 531 xxx, 28 532 xxx & 12 680 xxx (Organic). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805027

Hansgrohe ‘Axor’ range of chromium plated brass shower outlets, shower arms and ceiling connectors. The inlet of the overhead shower outlet incorporates a stainless-steel strainer. Model 26 034 xxx is supplied with a shower arm, and model 26 035 xxx is supplied with a ceiling connector. Maximum operating temperature 70°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805027
  • Expiry date: 31/05/2023
  • Note: Open outlet use only. Compatible shower arms and ceiling connectors are intended for use with shower outlets specified in this approval and are not approved in their own right.
  • Size: Shower outlet - ½” BSP (F). Connectors and arms - ½” BSP (M).
  • Marking: AXOR on shower plate.
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Axor Range: 30 247 xxx, 26 034 xxx & 26 035 xxx. Compatible shower arm: 26 431 xxx Axor (390mm). Compatible ceiling connectors: 26 432 xxx (100mm) & 26 433 xxx (300mm). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805028

‘Axor Citterio E’ range of wall mounted, concealed thermostatic shower control valves (DZR brass bodies - trims in various finishes), incorporating a non-rising spindle headwork controlling flow using a cross top operating member, and a manual diverter valve directing the flow between multiple shower outlets using single lever operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1805028
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” BSP (F).
  • Marking: Basic sets: Hansgrohe and DR on body. Finish sets: Axor on dome type operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Basic Sets: 36 701 xxx - Axor Citterio E (2 outlets) & 36 708 xxx - Axor Citterio E (3 outlets). For use with finish sets: 36 703 xxx - Axor Citterio E (2 outlets) & 36 704 xxx - Axor Citterio E (3 outlets). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805047

Single hole single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1805047
  • Expiry date: 31/05/2023
  • Size: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: ‘Hansgrohe’ on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    73 872 xxx - Hansgrohe M53 M531-H280 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805014

‘Axor’ range of shower outlet elbows (brass bodies – in various finishes) with shower handset holder. The product incorporates a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection. Maximum operating temperature 80°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805014
  • Expiry date: 31/05/2023
  • Note: Open outlet use only. Not supplied with shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: AXOR on backplate
  • Installation Requirements R001 R040
  • Model
    11 626 xxx - Axor Urquiola Porter unit Softcube. 19 622 xxx - Axor Bouroullec Porter unit. 36 724 xxx - Axor Citterio E Porter unit 120/120 Softcube. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805016

Wall mounted bar type thermostatic shower mixer (chromium plated brass), incorporating a ½ turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1805016
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ½” x ¾” offset union.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R010 R040
  • Model
    13 211 xxx - Hansgrohe Ecostat 1001 CL Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805017

‘Hansgrohe Ecostat Select’ range of wall mounted thermostatic shower valves with brass bodies (various finishes), incorporating a ½ turn ceramic disc headwork controlling the flow using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge using a single lever operating member and a manual override button. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1805017
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on body
  • Model
    Hansgrohe Ecostat Select Range: 13 161 xxx & 13 162 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805024

‘Axor’ wall mounted shower outlet elbow and handset retainer with chromium plated brass body. The shower outlet connection incorporates an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum operating temperature 70°C. Maximum working pressure 10.0 bar.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805024
  • Expiry date: 31/05/2023
  • Size: ½” BSP (M)
  • Marking: Axor on the front plate.
  • Installation Requirements R001
  • Model
    45 723 xxx - Axor Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805046

Wall mounted bar type thermostatic bath shower mixer (chromium plated brass), incorporating a shut off diverter valve controlling the flow to either the spout outlet or shower outlet with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge using a single lever operating member. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless steel strainers. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1805046
  • Expiry date: 31/05/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” off set union.
  • Marking: Hansgrohe on underside of body.
  • Installation Requirements R001 R020
  • Model
    Hansgrohe Ecostat Range: 13 112 xxx, 13 114 xxx (Comfort) & 13 115 xxx (Comfort Care). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807024

Wall mounted spout outlet with brass body (various finishes) incorporating a plastic aerator. Maximum operating temperature 60 °C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1807024
  • Expiry date: 31/07/2023
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe Logo on wall plate
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Metropol - 32 542 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807025

‘Axor Uno’ wall mounted, two hole, single outlet (fixed) combination tap assembly (brass body - in various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to a shower outlet. The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807025
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions
  • Marking: AXOR on body
  • Installation Requirements R001 r030
  • Model
    Axor Uno - 38 421 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807026

‘Hansgrohe Ecostat Select’ wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ½ turn ceramic disc headwork with a single lever operating member and self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member. The spout outlet incorporates a plastic aerator. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807026
  • Expiry date: 31/07/2023
  • Size: ½” BSP (M)
  • Marking: Hansgrohe logo on body
  • Installation Requirements R001 R030
  • Model
    Hansgrohe Ecostat Select - 13 141 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807027

‘Hansgrohe Metris’ range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. These products are intended for connection to a specifically dimensioned installation set, (which is not supplied or covered under the scope of this approval). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1807027
  • Expiry date: 31/07/2023
  • Size: Headwork base is 34mm OD (outside diameter). Spout inlet is ½” BSP (M).
  • Marking: Hansgrohe logo on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Metris Range: 31 085 xxx, 31 086 xxx, 31 251 xxx, 31 162 xxx & 31 163 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807028

Range of overhead shower outlets with brass bodies in a variety of surface finishes, incorporating EPDM `O`-rings. The shower outlets also incorporate a plastic strainer. Maximum operating temperature 70°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1807028
  • Expiry date: 31/07/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    27 468 xxx Hansgrohe Raindance Air Overhead Shower 27 471 xxx Hansgrohe Raindance Overhead Shower 27 472 xxx Hansgrohe Raindance Overhead Shower 27 476 xxx Hansgrohe Raindance Air Overhead Shower 27 478 xxx Hansgrohe Raindance Air Overhead Shower 27 492 xxx Hansgrohe Raindance Air Overhead Shower 27 493 xxx Hansgrohe Raindance Overhead Shower 27 494 xxx Hansgrohe Raindance Overhead Shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807036

Range of concealed thermostatic shower mixers with brass bodies (various finishes), incorporating a ceramic disc diverter valve controlling the flow between two outlets. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. The 15 708 xxx models have cube type operating members, the 15 714 xxx & 15 758 xxx models have single lever operating members. Both inlets incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1807036
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    15 708 xxx Ecostat E. 15 714 xxx Ecostat. 15 758 xxx Ecostat S. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807037

Range of concealed thermostatic shower mixers with brass bodies (various finishes), incorporating a ¼ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. The 15 708 xxx models have cube type operating members, the 15 714 xxx & 15 758 xxx models have single lever operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1807037
  • Expiry date: 31/07/2023
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    15 707 xxx Ecostat E. 15 712 xxx Ecostat. 15 757 xxx Ecostat S. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807038

Range of wall mounted, exposed, manual blending (shower) mixers with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1807038
  • Expiry date: 31/07/2023
  • Size: ½” x ¾” offset unions
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    14 161 xxx Hansgrohe Talis Classic. 32 620 xxx Hansgrohe Talis S. 32 640 xxx Hansgrohe Talis. 71 600 xxx Hansgrohe Logis. 71 262 xxx Hansgrohe Logis. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807314

Single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with and single lever operating member. The spout outlet incorporates a plastic aerator which includes a 5.7l/min plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1807314
  • Expiry date: 31/07/2023
  • Note: Claims for flow rate are made by the manufacturer and not considered part of the listing.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    71 050 xxx Hansgrohe Novus Pillar tap 70 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807332

‘Hansgrohe Novus’ range of wall mounted, manually operated shower blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks, and various single lever operating members. The outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1807332
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (F) x ½” BSP (M) offset union connectors
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Novus Range: 71 926 xxx, 71 360 xxx & 71 060 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807333

‘Hansgrohe Novus’ single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1807333
  • Expiry date: 31/07/2023
  • Size: Stainless steel braided TPSiV lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Novus - 71 322 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807339

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a flow regulator and plastic aerator. Model 71 126 000 is also supplied with a lever operated pop-up waste. Maximum working pressure 10 bar. Maximum working temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1807339
  • Expiry date: 31/07/2023
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Novus: 71 126 xxx & 71 128 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707113

Range of concealed flow control valves with brass bodies (various finishes), incorporating either non-rising spindle or ¼ turn ceramic disc (16 973 180 only) headworks. Valve models are for use with trim kits utilising various operating members (see below). Kits are available in various finishes (denoted by xxx). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1707113
  • Expiry date: 31/07/2022
  • Size: 15 974 180 & 15 973 180: ½” BSP (F) 15 970 180: ¾” BSP (F)
  • Marking: Hansgrohe & direction of flow arrow on body
  • Installation Requirements R001 R040
  • Model
    Concealed Valves: 16 974 180, 16 973 180 & 16 970 180 Trim Kits: 10 970 xxx Axor Starck (lever), 10 972 xxx Axor Shower (lever), 10 974 xxx Axor Starck X (lever), 11 960 xxx Axor Urquiola (cubed), 12 771 xxx Axor Starck Organic (dome), 16 871 xxx Axor Montreux (cross top), 16 872 xxx Axor Montreux (lever), 17 960 xxx Axor Carlton (lever), 17 965 xxx Axor Carlton (cross top), 18 770 xxx Axor Massaud (dome), 19 971 xxx Axor Bouroullec (dome), 34 960 xxx Axor Citterio M (lever), 34 980 xxx Axor Citterio M (three prong), 36 771 xxx Axor Citterio E (cross top), 38 976 xxx Axor Uno (dome), 39 960 xxx Axor Citterio (lever) & 39 965 xxx Axor Citterio (cross top). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807366

Two hole, wall mounted, single outlet (fixed) combination tap assembly with brass body (various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator with flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1807366
  • Expiry date: 31/07/2023
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on concealed body and operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Novus 71 127 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809001

A range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating push button headworks with one controlling flow to the bath outlet and the other controlling flow to the shower outlet. The temperature is controlled separately with a thermostatic cartridge with a manual override button. The spout outlet incorporates a plastic aerator. The inlets incorporate a stainless steel strainer and an approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809001
  • Expiry date: 30/09/2023
  • Note: The approval does not include a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Axor on body
  • Installation Requirements R001 R010 R040
  • Model
    45 420 xxx Axor Shower Solutions 800 45 421 xxx Axor Shower Solutions 1200 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809002

‘Hansgrohe Raindance E 300’ range of shower outlets with brass bodies (various finishes). The products incorporate a stainless steel strainer and flow regulator. Maximum operating temperature 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1809002
  • Expiry date: 30/09/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on showerhead plate
  • Installation Requirements R001 R040
  • Model
    26 238 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with shower arm 390 mm 26 239 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with shower arm 390 mm EcoSmart 9 l/min 26 250 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with ceiling connector 100 mm 26 251 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with ceiling connector 100 mm EcoSmart 9 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809003

Wall mounted two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes) incorporating a ceramic cartridge with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator the shower outlet incorporates an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809003
  • Expiry date: 30/09/2023
  • Note: Not supplied with a shower hose or handset
  • Size: ¾” – ½” BSP (M) offset connectors
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    32 420 xxx - Talis S: Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812705

Wall mounted, two hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a half-turn ceramic disc headwork, both controlling and manually diverting the flow to a shower outlet connection. Temperature is controlled independently via a thermostatic cartridge. The spout outlet incorporates a plastic aerator. Both inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1812705
  • Expiry date: 31/12/2023
  • Note: Not supplied with shower hose and handset
  • Size: ½” BSP (M)
  • Marking: Axor on faceplate
  • Installation Requirements R001 R020 R040
  • Model
    12 410 xxx - AXOR Starck Organic thermostatic bath mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809005

Two hole, single outlet, wall mounted combination tap assembly with brass body (various finishes) incorporating ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809005
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset
  • Size: ½” x ¾” BSP (M) offset unions
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    31 340 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809006

‘Axor Citterio’ and ‘Uno’ ranges of wall mounted, exposed manually blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1809006
  • Expiry date: 30/09/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: AXOR on body
  • Installation Requirements R001 R010 R040
  • Model
    34 620 xxx - Axor Citterio M, 38 620 xxx - Axor Uno² 38 621 xxx - Axor Uno & 45 600 xxx - Axor Uno. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809007

‘Axor ShowerCollection’ wall mounted spout outlet with a brass body (various finishes), intended for use with a DZR brass concealed basic set. The products incorporate a plastic flow regulator and a stainless-steel strainer at the inlet. Max operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1809007
  • Expiry date: 30/09/2023
  • Note: Open outlet use only.
  • Size: 10 942 xxx – 18mm spigot connection 10 941 180 – ¾” BSP (F)
  • Marking: Spout - Axor and Hansgrohe on body Basic set - Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    10 942 xxx AXOR ShowerCollection Flood Spout & 10 941 180 AXOR ShowerCollection Basic Set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809008

Three hole, basic rough-in set with a brass body, incorporating EPDM O-ring seals. The product is supplied with a shower hose and a stainless steel braided, silicone lined flexible connecting hose. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 1535 Miscellaneous
  • Section Subtitle: Tap accessories.
  • WRAS Approval Number: 1809008
  • Expiry date: 30/09/2023
  • Size: ½” BSP (M)
  • Marking: Hansgrohe & AXOR on adhesive label on body
  • Installation Requirements R001 R007 R010 R040
  • Model
    13 439 180 - Hansgrohe Basic Set.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809009

‘Axor Carlton’ three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating ceramic disc cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809009
  • Expiry date: 30/09/2023
  • Note: No testing performed on pop-up waste
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR on front of spout
  • Installation Requirements R001 R006 R007 R009 r010
  • Model
    17 134 xxx - Axor Carlton Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809010

‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose. Maximum operating temperature 65°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1809010
  • Expiry date: 30/09/2023
  • Note: Open outlet use only.
  • Size: ½” captive nut end connectors
  • Marking: Hansgrohe logo on ferrule
  • Installation Requirements R001
  • Model
    28 167 xxx - Hansgrohe Comfortflex shower hose 1250mm 28 168 xxx - Hansgrohe Comfortflex shower hose 1600mm 28 169 xxx - Hansgrohe Comfortflex shower hose 2000mm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810711

‘Axor Massaud’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a joystick operating member. A plastic flow regulator is incorporated within the tap body at the spout connection. The hose inlet incorporates a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810711
  • Expiry date: 31/10/2023
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Axor on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    Axor Massaud Range: 18 010 xxx & 18 020 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809028

Wall mounted two hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to the shower outlet. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809028
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” off set union.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    31 460 xxx Hansgrohe Metris S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809029

‘Axor Uno’ range of floor mounted spout outlets with brass bodies (various finishes) incorporating a plastic aerator. The products are supplied with a rough-in set. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1809029
  • Expiry date: 30/09/2023
  • Note: Open outlet use only. The 10452180 rough-in set is not approved in its own right.
  • Size: ½” BSP (F) (to the 10452180 rough-in set)
  • Marking: AXOR on spout
  • Installation Requirements R001 R010 R040
  • Model
    Axor Uno Range: 384 12 xxx & 45 412 xxx To be used in conjunction with the 10 452 180 rough-in set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809030

Wall mounted bar type thermostatic combination tap assembly (chromium plated brass), incorporating a ceramic disc headwork controlling and diverting the flow between the spout outlet or shower outlet using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1809030
  • Expiry date: 30/09/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” x ½” off set union.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R010 R040
  • Model
    13 201 xxx Hansgrohe Ecostat 1001 CL Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809031

Wall mounted, exposed, thermostatic blending valve with brass body (various finishes). The flow is controlled via a shut off valve with a quarter turn ceramic disc with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1809031
  • Expiry date: 30/09/2023
  • Size: ½” BSP (M)
  • Marking: Axor on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    12 602 xxx Axor Starck Organic Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809061

Range of single hole, single outlet, swivel combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temp 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809061
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 r010
  • Model
    73 885 xxx Hansgrohe M41 M411-H160 Single lever kitchen mixer 160, 31 806 xxx Hansgrohe Focus Single lever kitchen mixer 160, 31 802 xxx Hansgrohe Avista Kitchen Mixer, 31 786 xxx Hansgrohe Focus S Single lever kitchen mixer, 31 780 xxx Hansgrohe Focus E Single lever kitchen mixer 160. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809323

‘Hansgrohe Ecos’ single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809323
  • Expiry date: 30/09/2023
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    14 057 xxx – Hansgrohe Ecos Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809311

‘Hansgrohe Novus’ range of wall mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1809311
  • Expiry date: 30/09/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” offset unions.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    Hangrohe Novus Range: 71 340 xxx & 71 040 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805328

Hansgrohe ‘Metropol’ range of wall mounted, manually blending shower blending valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1805328
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose or handset.
  • Size: ½” x ¾” BSP offset union
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe Metropol 32 560 xxx & 74 560 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810012

Range of concealed diverter valves with DZR brass bodies (various finishes), ceramic disc diverter and EPDM ‘O’-rings and seals. The product can supplied with a trim set and various operating members (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2050 Valves
  • Section Subtitle: Diverter.
  • WRAS Approval Number: 1810012
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on (concealed) brass body of basic sets (15 930 180 & 15 981 180). 15 932 xxx trim set: Hansgrohe on backplate. All other trim sets: Axor on backplate.
  • Installation Requirements R001
  • Model
    Basic sets - Both can be installed in conjunction with any of the trim sets: 15 930 180 Hansgrohe Basic set for Quattro four-way diverter valve for concealed installation 15 981 180 Hansgrohe Basic set for Trio diverter valve for concealed installation. Trim sets (dome type operating member unless stated): 10 930 xxx AXOR Starck Trio/Quattro diverter valve for concealed installation (cross top operating member), 10 932 xxx AXOR ShowerCollection Trio/Quattro diverter valve 120/120 Square for concealed Installation, 10 934 xxx AXOR Starck X Trio/Quattro diverter valve for concealed installation (cross top operating member), 11 925 xxx AXOR Urquiola Trio/Quattro diverter valve for concealed installation (cube type operating member), 12 731 xxx AXOR Starck Organic Trio/Quattro diverter valve for concealed installation 12 x 12, 15 932 xxx Hansgrohe Trio/Quattro S diverter valve for concealed Installation, 18 730 xxx AXOR Massaud Trio/Quattro diverter valve for concealed installation, 34 920 xxx AXOR Citterio M Trio/Quattro diverter valve for concealed installation, 38 933 xxx AXOR Uno Trio/Quattro diverter valve for concealed installation, 39 920 xxx AXOR Citterio Trio/Quattro diverter valve for concealed installation (single lever operating member), 39 925 xxx AXOR Citterio Trio/Quattro diverter valve for concealed installation (cross top operating member). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811002

Wall mounted shower kit with brass body (various finishes), consisting of an overhead shower outlet, handset and hose. The product is supplied with a fixed riser assembly and incorporates a manual diverter valve alternating the flow between outlets using a push button mechanism. The shower handset connection incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset and overhead shower incorporates a stainless-steel strainer and a plastic flow regulator. Maximum working temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1811002
  • Expiry date: 30/11/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on shower handset and overhead shower
  • Installation Requirements R001 R040
  • Model
    27 270 xxx - Hansgrohe Crometta S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811003

‘Axor Uno’ range of three hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1811003
  • Expiry date: 30/11/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR on front spout.
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    Axor Uno Range: 38 054 xxx & 45 133 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811004

‘Axor Citterio M’ range of wall mounted, three-hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models listed are spout and trim sets intended for use with rough-in set 10 303 180. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1811004
  • Expiry date: 30/11/2023
  • Note: The rough-in set 10 303 180 is not covered by the scope of this approval.
  • Size: Intended for use with specified rough-in sets.
  • Marking: Axor or Axor & Hansgrohe on base of spout
  • Installation Requirements R001 R010 R040
  • Model
    Axor Citterio M Range: 34 313 xxx, 34 314 xxx, 34 315 xxx & 34 316 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812025

‘Hansgrohe Logis’ range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70 °C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1812025
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe SE found on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Logis Range: 71 832 xxx, 71 839 xxx - Coolstart Eco & 71 833 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812026

Range of pillar taps with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a rubber aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1812026
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided, PEX lined hose assembly incorporating ⅜” Captive nut end connections
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R009
  • Model
    31 130 xxx Hansgrohe Focus Pillar tap Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812027

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a rubber aerator. Model 32 040 is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60 °C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1812027
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Talis range: 32 040 xxx 32 041 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812028

Range of ceramic cartridge headworks with plastic bodies & silicone rubber seals. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 1812028
  • Expiry date: 31/12/2023
  • Size: 35mm
  • Marking: Hansgrohe & M35 on shoulder. Date of manufacture (DD/MM/YY) on body.
  • Installation Requirements R001
  • Model
    30 129 900 - M35R, 30 129 902 - M35R, 30 129 910 - M35R EcoR & 30 129 920 - M35L. Model added May 21/05/2021 30 129 922
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812058

Deck mounted pillar tap with a brass body (various finishes), incorporating a half turn ceramic disc headwork with a dome type operating member. The spout outlet incorporates a plastic spray disc and a plastic flow regulator. This product is supplied with a stainless-steel strainer, intended for installation at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1812058
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assembly incorporating ⅜” captive nut end connections.
  • Marking: Axor on body
  • Installation Requirements R001 R006 R009
  • Model
    12 110 xxx - Axor Starck Organic Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812059

Range of wall mounted, concealed, brass bodied basic installation sets, intended for use in conjunction with specific trim and finish sets. Maximum working pressure 10.0 Bar. Maximum operating temperature 75°C.

Print This Approval


WRAS Approval Number: 1812060

Range of shower hoses with a rubber outer layer (in various finishes) and LLDPE liner, incorporating volumetric control to adjust the flow rate at the hose outlet. Maximum operating temperature 70°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1812060
  • Expiry date: 31/12/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Axor or Hansgrohe on captive nut.
  • Installation Requirements R001
  • Model
    28 127 xxx - Axor 1.25m, 28 128 xxx - Axor 1.60m, 28 249 xxx - Hansgrohe Isiflex 1.25m & 28 248 xxx - Hansgrohe Isiflex 1.60m.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812061

Wall mounted bath spout with a brass body (various finishes), incorporating a plastic aerator. Maximum operating temperature 60ºC.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1812061
  • Expiry date: 31/12/2023
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe on rosette
  • Installation Requirements R001 R040
  • Model
    71 410 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812062

Deck mounted pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1812062
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided silicone rubber lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe On operating member
  • Installation Requirements R001 R006 r009
  • Model
    13 132 xxx - Hansgrohe Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812063

‘Axor Montreux’ range of three hole, metal, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with cross top or single lever operating members. The spout outlet incorporates a plastic aerator and flow regulator. The product is supplied with a pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1812063
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided, silicone rubber lined hose assemblies incorporating ½” captive nut end connections
  • Marking: AXOR on Front base of spout
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    Axor Montreux Range: 16 513 xxx & 16 514 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810310

Range of two hole, concealed, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge with a single lever operating member to control the temperature and an additional ‘detent’ (push to on push to off) headwork at the end of the spout controlling the flow. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1810310
  • Expiry date: 31/10/2023
  • Size: ½” BSP (F)
  • Marking: Axor on operating member
  • Installation Requirements R001 R010 R040
  • Model
    45 112 xxx Axor Uno Select & 45 113 xxx Axor Uno Select Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901001

Range of wall mounted, concealed, manually blending mixer valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter. This product incorporates silencers in each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1901001
  • Expiry date: 31/01/2024
  • Note: Not supplied with shower hose and handset. The Hansgrohe iBox is not covered by this approval.
  • Size: Body for insertion into Hansgrohe iBox
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R030
  • Model
    71 745 xxx - Talis E & 72 405 xxx - Talis S. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901002

Range of shower handsets with plastic bodies in a chromium plated and white plastic finish. Vario models incorporate multi spray patterns. Ecosmart and Green models also incorporate plastic flow regulators. Models are either supplied with a stainless-steel strainer (intended for installation at the inlet) or incorporate a plastic strainer. Maximum operating temperature 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1901002
  • Expiry date: 31/01/2024
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe & Crometta on body
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Crometta Vario: 26 330 400, 26 332 400 (EcoSmart) & 26 336 400 (Green). Hansgrohe Crometta 1jet: 26 331 400, 26 333 400 (EcoSmart) & 26 334 400 (Green).
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901003

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1901003
  • Expiry date: 31/01/2024
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 851 xxx - Talis M52 Single lever kitchen mixer 170 Model added February 2021: 32 857 xxx - Talis M52 Single lever kitchen mixer 170 Eco Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907700

Ceramic cartridge headwork with a plastic body and EPDM seals for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C

  • Section: 0440 Headworks
  • WRAS Approval Number: 1907700
  • Expiry date: 31/07/2024
  • Size: Ø 27mm
  • Marking: Hansgrohe on body
  • Installation Requirements R001
  • Model
    30 614 320 - J27Joystick mixing cartridge.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901311

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1901311
  • Expiry date: 31/01/2024
  • Size: Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R009 R010
  • Model
    71812xxx M431-H220 & 71802xxx M421-H220. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. .
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901312

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet has various lengths depending on model and incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1901312
  • Expiry date: 31/01/2024
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    71806xxx M421-H120 71805xxx M4221-H120 CoolStart 71808xxx M421-H100 71809 M4221-H100 CoolStart Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903005

Range of wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and various single lever operating members. The products also incorporate a self-cancelling diverter. Models listed are trim and finish sets, intended for use with the Hansgrohe iBox (01 800 180 or 01 810 180). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1903005
  • Expiry date: 31/03/2024
  • Note: Not supplied with shower hose and handset. The Hansgrohe iBox is not covered by this approval.
  • Size: Body for insertion into Hansgrohe iBox.
  • Marking: Hansgrohe and/or AXOR on wall-plate and/or operating member.
  • Installation Requirements R001 R030
  • Model
    10 415 xxx - AXOR Starck Classic, 10 416 xxx - AXOR Starck, 10 445 xxx - AXOR Starck X, 11 425 xxx - Urquiola, 12 415 xxx - AXOR Starck Organic, 14 145 xxx - Hansgrohe Talis, 15 445 xxx - Hansgrohe PuraVida, 17 415 xxx - AXOR Carlton, 18 455 xxx - Massaud, 31 454 xxx - Hansgrohe Metris, 31 465 xxx - Hansgrohe Metris S, 31 485 xxx - Hansgrohe Metris Classic, 31 493 xxx - Hansgrohe Metris, 31 945 xxx - Hansgrohe Focus, 32 475 xxx - Hansgrohe Talis S, 34 425 xxx - AXOR Citterio M, 39 455 xxx - AXOR Citterio & 71 405 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903001

Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. The products incorporate elbow fittings. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1903001
  • Expiry date: 31/03/2024
  • Size: ½” BSP (F)
  • Marking: Hansgrohe, AXOR and model on adhesive label on the body.
  • Installation Requirements R001 R040
  • Model
    13 129 180 - Hansgrohe ShowerTablet 600 & 45 442 180 - Axor Thermostat 800
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903002

‘Hansgrohe Raindance E’ range of overhead shower outlets with brass bodies (various finishes), incorporating a stainless-steel strainer. Model 26 253 xxx also incorporates a plastic flow regulator. Models listed are intended for use in conjunction with basic set for Raindance E (26 254 180) Maximum operating temperature 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1903002
  • Expiry date: 31/03/2024
  • Note: Open outlet use only. Raindance E basic set (26 254 180)
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on shower plate.
  • Installation Requirements R001 R007 R040
  • Model
    Hansgrohe Raindance E 400: 26 252 xxx & 26 253 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904703

Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with various single lever operating members. The spout outlets incorporate a plastic flow straightener and a stainless steel strainer. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1904703
  • Expiry date: 30/04/2024
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R005 R010
  • Model
    31 423 xxx - Hansgrohe Metris, 31 427 xxx - Hansgrohe Talis & 31 523 xxx - Hansgrohe Focus. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903006

‘Hansgrohe Metris’ range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1903006
  • Expiry date: 31/03/2024
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe Base (front) of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Metris Range: 14 823 xxx & 14 822 800 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903007

Wall mounted, two hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork and joystick operating member. The spout outlet incorporates a plastic aerator. The spout outlet connections also incorporate a plastic flow regulator and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The model listed is a spout and finish set intended for use with basic rough-in sets (13622180/13623180). The spout outlet incorporates a plastic flow regulator with stainless steel strainer. Maximum working pressure 10.0 bBar. Maximum operating temperature 60°C.

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1903007
  • Expiry date: 31/03/2024
  • Note: Basic rough-in sets 13622180 & 13623180 are not covered by the scope of this approval.
  • Size: ½” BSP (F)
  • Marking: AXOR at Base of swivel
  • Installation Requirements R001 R010 R040
  • Model
    38 815 xxx - Axor Uno² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903008

Single hole single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headworks with single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1903008
  • Expiry date: 31/03/2024
  • Note: No testing performed on the pop up waste
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on base of tap
  • Installation Requirements R001 R006 R009 R010
  • Model
    72 105 xxx - Hansgrohe Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903009

‘Starck’ range of metal effect shower hoses in a variety of finishes, incorporating an LLDPE liner. Maximum operating temperature - 70°C

  • Section: 1860 Tubes
  • Section Subtitle: Plastic hoses.
  • WRAS Approval Number: 1903009
  • Expiry date: 31/03/2024
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Axor on conical nut
  • Installation Requirements R001
  • Model
    28 282 xxx - AX Starck 1.25m, 30 469 418 - ISI-STARCK 1.25m, 28 286 xxx - AX Starck 1.60m, 30 477 218 - ISI-STARCK 1.60m & 28 284 xxx - AX Starck 2.00m. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903323

Chromium plated plastic shower handset (various finishes) with EPDM seals The inlet incorporates a plastic flow regulator and stainless-steel strainer. Maximum operating temperature 60°C. Open outlet use only.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1903323
  • Expiry date: 31/03/2024
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    26 014 000 - Raindance S 120 3Jet P Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903339

‘Hansgrohe Novus’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with various single lever operating members. The spout outlets incorporate a plastic aerator and some products are supplied with either a lever operated or click-type pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1903339
  • Expiry date: 31/03/2024
  • Note: No testing performed on lever operated pop-up wastes.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Novus Range: 71 020 xxx - with lever operated waste set, 71 021 xxx, 71 022 xxx - Coolstart with click type pop-up waste, 71 030 xxx - with lever operated waste, 71 031 xxx, 71 032 xxx - Coolstart with click type pop-up waste, 71 080 xxx - with lever operated waste, 71 084 xxx - Coolstart with lever operated waste, 71 081 xxx - with lever operated waste, 71 085 xxx - CoolStart with lever operated waste, 71 180 xxx - CoolStart, 71 920 xxx - with lever operated waste, 71 921 xxx - with lever operated waste, 71 123 xxx - with lever operated waste & 71 124 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903348

Metropol range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter ceramic disc headworks with single lever operating members. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1903348
  • Expiry date: 31/03/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    32 514 xxx - Metropol 3-hole basin mixer 110 with lever handles. 74 514 xxx - Metropol 3-hole basin mixer 110 with loop handles. 32 515 xxx - Metropol 3-hole basin mixer 160 with lever handles. 74 515 xxx - Metropol 3-hole basin mixer 160 with loop handles. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903349

Hansgrohe Metropol’ range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1903349
  • Expiry date: 31/03/2024
  • Size: Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Metropol: 32 511 000 & 74 511 000 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903003

‘Axor Urquiola’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and dome type operating members. The spout outlets are fitted with a plastic aerator which also incorporates a plastic flow regulator. Models 11 020 xxx & 11 025 xxx are supplied with lever operated pop-up wastes. Model 11 034 xxx also features a soap tray. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1903003
  • Expiry date: 31/03/2024
  • Note: No testing performed on pop-up waste.
  • Size: Stainless-steel braided PE-X lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR & Hansgrohe on base of tap body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Axor Urquiola Range: 11 020 xxx, 11 021 xxx, 11 025 xxx, 11 034 xxx & 11 035 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903338

‘Hansgrohe Raindance S’ range of overhead shower outlets with brass bodies (various finishes), incorporating a brass swivel connector and EPDM o-rings. Model 26 607 000 is supplied with a brass shower arm for wall mounting, whilst 27 620 000 is supplied with a brass ceiling connector. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1903338
  • Expiry date: 31/03/2024
  • Note: Open outlet use only.
  • Size: ½” BSP (M) or ½” BSP (F)
  • Marking: Hansgrohe on edge of shower
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Raindance S Range: 27 607 xxx, 27 620 xxx & 27 623 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903308

Wall mounted, bar-type thermostatic shower valve with brass body (various finishes), incorporating a ceramic disc headwork controlling and diverting the flow between shower outlets using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The valve inlets incorporate stainless-steel strainers, plastic flow regulators and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower (on a fixed riser), handshower and shower hose. The overhead shower incorporates a stainless-steel strainer at the inlet. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1903308
  • Expiry date: 31/03/2024
  • Size: ¾” BSP (M) offset union
  • Marking: Hansgrohe on valve body.
  • Installation Requirements R001 R020
  • Model
    27 633 xxx - Raindance Select S Showerpipe 240 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807092

"Axor" Range of concealed thermostatic shower mixers with brass bodies (various finishes), incorporating a ceramic disc diverter valve controlling the flow between two outlets. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. Models have cube type operating members. Both inlets incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1807092
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (F)
  • Marking: AXOR ON FACEPLATE
  • Installation Requirements R001 R010 R040
  • Model
    HANSGROHE 'AXOR' RANGE OF CONCEALED THERMOSTATIC SHOWER VALVES, CONSISTING OF: 46 760 XXX & 46 761XXX 46 760 XXX & 46 761XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904067

‘Hansgrohe Logis’ wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Model listed is a spout and finish set, intended for use in conjunction with concealed basic set 13 622 180. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1904067
  • Expiry date: 30/04/2024
  • Note: The concealed basic set 13 622 180 is not covered by the scope of this approval.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    71 220 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904068

Range of partially concealed, wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The product also incorporates a self-cancelling diverter. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1904068
  • Expiry date: 30/04/2024
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R030 R040 R120
  • Model
    71 408 xxx Hansgrohe Logics E bath mixer set for concealed installation. 71 246 xxx Hansgrohe MySport Single lever bath mixer for concealed installation. 71 245 xxx MyCube Single lever bath mixer for concealed installation 31 779 xxx Hansgrohe Ecos Bath mixer set for concealed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904069

‘Axor ShowerSolutions’ wall mounted, thermostatic shower valve with brass body (various finishes), incorporating ‘detent’ (push on, push off) headworks controlling the flow via push button assembly. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1904069
  • Expiry date: 30/04/2024
  • Size: ½” BSP (M)
  • Marking: AXOR on front of valve body.
  • Installation Requirements R001 R010 R040
  • Model
    45 440 xxx - Axor ShowerSolutions 800 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904006

‘Hansgrohe Ecostat’ and ‘Versostat’ ranges of wall mounted, thermostatic shower control valves with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks controlling the flow using single lever operating members. Temperature is controlled independently via a thermostatic cartridge, also using various lever operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1904006
  • Expiry date: 31/01/2024
  • Size: ½” BSP (M) x ¾” BSP (M) offset unions.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R010 R040
  • Model
    13 113 xxx - Hansgrohe Ecostat, 13 116 xxx - Hansgrohe Ecostat, 13 117 xxx - Hansgrohe Ecostat & 15 368 xxx - Hansgrohe Versostat. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904012

‘Hansgrohe Raindance’ range of overhead shower outlets with brass bodies (various finishes). The products incorporate a plastic flow regulator. Models listed are to be used in conjunction with the 26 471 180 basic set. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1904012
  • Expiry date: 30/04/2024
  • Note: Open outlet use only. The 26 471 180 basic set is not approved in its own right.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on front of shower faceplate.
  • Installation Requirements R001 R009
  • Model
    Hansgrohe Raindance range: 26 472 xxx & 26 481 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903324

‘Secuflex’ range of rim mounted, concealed pull-out shower sets, consisting of a metal interlocked shower hose, brass outlet connector and a stainless steel braided, silicone lined flexible connecting hose assembly. The concealed hose connection incorporates an approved single check valve cartridge; however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum operating temperature 70°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1903324
  • Expiry date: 31/03/2024
  • Note: Open outlet use only. Not supplied with a shower handset. IRN R007 applies only to the braided connection hose.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on shower holder.
  • Installation Requirements R001 R007 R040
  • Model
    28 380 xxx - Hansgrohe Secuflex & 28 382 xxx - AXOR Secuflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906704

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1906704
  • Expiry date: 30/06/2024
  • Size: Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections
  • Marking: Hansgrohe on front base of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    14 870 XXX Hansgrohe Talis S² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Kreuzwegstrasse 41 D-77656 Offenburg
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805113

Starck hand shower with plastic body – chrome finish. The hand shower incorporates a stainless-steel strainer, integral flow regulator. and a multi-function spray pattern utilising a plastic aerator. Maximum operating temperature: 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805113
  • Expiry date: 31/05/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Axor on handset
  • Installation Requirements R001 R040
  • Model
    30410818 HB WET STICK STARCK SHOWER OUTLET
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804104

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1804104
  • Expiry date: 30/04/2023
  • Size: Stainless steel braided PEX lined hoses incorporating ⅜” captive nut end connections
  • Marking: Hansgrohe logo on tap body
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 817 xxx Hansgrohe Focus Single lever kitchen mixer 280. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807093

Concealed thermostatic shower mixer with brass body(various finishes), incorporating a ceramic disc diverter valve controlling the flow between two outlets. Temperature is controlled independently via a thermostatic cartridge with manual override button. The products are supplied with trim sets and operating members in a variety of finishes. Models have single lever operating members. Both inlets incorporate an approved check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1807093
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    15 790xxx HG ECOSTAT S CARE Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1902700

‘Axor Citterio’ wall mounted, manually blending shower valve with brass body (various finishes) incorporating a ceramic cartridge headwork and single lever operating member. The shower outlet connection incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 70 °C

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1902700
  • Expiry date: 29/02/2024
  • Size: ½” BSP (M)
  • Marking: AXOR on shower shelf, Citterio under outlet
  • Installation Requirements R001 R010 R040
  • Model
    39 600 xxx - Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905300

AXOR Uno Range of single hole, single outlet (fixed) over the rim bidet combination tap assemblies with brass bodies (various finishes). Incorporating ceramic cartridge headworks and various operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 1905300
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: AXOR on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    45 200 xxx (dome type operating member) 38 211 xxx (loop type operating member) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905326

Wall mounted shower outlet having a riser pipe with diverter having a brass body (various finishes) from overhead to a hand held shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1905326
  • Expiry date: 31/05/2024
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on overhead shower and handset holder.
  • Installation Requirements R001 R040
  • Model
    27 795 xxx HG Crometta S 240 SHP EcoSm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905384

Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 70°C.

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1905384
  • Expiry date: 31/05/2024
  • Note: Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
  • Size: 30.23mm
  • Marking: Axor logo on faceplate
  • Installation Requirements R001 R160
  • Model
    Hansgrohe Exafill basic sets: 58 125 180, 58 126 180, 58 301 180 & 58 302 180. Hansgrohe Exafill bath filler, waste & overflow set: 58 127 xxx, 58 128 xxx, 58 300 xxx Axor Finish Set, 58 303 xxx Axor Complete Set & 58 123 xxx Hansgrohe Complete Set. ‘xxx’ denotes finish, and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905001

Floor mounted single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1905001
  • Expiry date: 31/05/2024
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on front of Body
  • Installation Requirements R001 R010 R040
  • Model
    72 412 xxx HG Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905018

Concealed, floor mounting basic set with DZR brass body for use with floor standing bath mixers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 1535 Miscellaneous
  • Section Subtitle: Tap accessories.
  • WRAS Approval Number: 1905018
  • Expiry date: 31/05/2024
  • Size: ½” BSP (F)
  • Marking: Hansgrohe and DR on body
  • Installation Requirements R001 R010
  • Model
    10 452 180 Axor Starck
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905003

Range of wall mounted, concealed, manual blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and various single lever operating members. The product is also supplied with ¾” BSP (M) x ½” BSP (F) adaptors. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1905003
  • Expiry date: 31/05/2024
  • Note: This approval does not include a shower hose and handset. The basic set is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: AXOR on wall plate.
  • Model
    Basic set: 01 800 180 ibox universal Finish sets: 10 615 xxx Axor Starck (single lever operating member) 10 616 xxx Axor Starck (single lever operating member) 10 645 xxx Axor Starck X (single lever operating member) 11 625 xxx Axor Urquiola (single lever operating member) 12 605 xxx Axor Starck Organic (dome type operating member) 14 165 xxx Hansgrohe Talis Classic (single lever operating member) 15 665 xxx Hansgrohe PuraVida (single lever operating member) 18 655 xxx Axor Massaud (dome type operating member) 31 456 xxx Hansgrohe Metris (single lever operating member) 31 665 xxx Hansgrohe Metris S (single lever operating member) 31 685 xxx Hansgrohe Metris (single lever operating member) 31 965 xxx Hansgrohe Focus (single lever operating member) 32 675 xxx Hansgrohe Talis S (single lever operating member) 34 625 xxx Axor Citterio M (single lever operating member) 39 655 xxx Axor Citterio (single lever operating member) 71 605 xxx Hansgrohe Logis (single lever operating member). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905040

Range of thermostatic cartridges with plastic bodies, plastic strainers and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum operating temperature 80°C.

  • Section: 0442 Thermostatic cartridges
  • WRAS Approval Number: 1905040
  • Expiry date: 31/05/2024
  • Size: Ø 30mm
  • Marking: HG on body.
  • Installation Requirements R001
  • Model
    30 615 900 Thermostatic Cartridge T32K & 31 615 900 Thermostatic Cartridge T32K
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905050

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating a ceramic cartridge headwork with a joystick type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1905050
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided PEX lined hose assemblies incorporating ⅜” captive nut end connections
  • Marking: AXOR on front of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    10 801 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905054

Range of chromium plated plastic bodied or brass bodied (28 489 xxx model) overhead shower outlets. The 27 405 xxx model is supplied with a ceiling mounted shower arm and the 27 424 xxx models with a wall mounted shower arm, both are chromium plated brass. All shower outlets incorporate a combined EPDM washer and plastic strainer on the inlet. Maximum operating temperature 70°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1905054
  • Expiry date: 31/05/2024
  • Size: Hansgrohe Raindance models: ½” BSP (M). Axor Carlton & Citterio models: ½” BSP (F).
  • Marking: Hansgrohe or Axor on showerhead.
  • Installation Requirements R001 R040
  • Model
    27 405 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 27 424 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 28 474 xxx Axor Carlton Overhead shower. 28 487 xxx Axor Carlton Overhead shower. 28 489 xxx Axor Citterio Overhead shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905069

Wall mounted, concealed, thermostatic blending valves with brass body (various finishes). The temperature is controlled via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1905069
  • Expiry date: 31/05/2024
  • Note: The 01 800 180 iBox universal basic set is not approved in its own right.
  • Size: ¾” BSP (F) inlet and outlet
  • Marking: AXOR, Hansgrohe on face plate
  • Installation Requirements R001 R010 R040
  • Model
    16 823 xxx Axor Montreux Finish Set Thermostatic Mixer For use with Basic set: 01 800 180 iBox universal Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910700

Single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating half turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts and a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1910700
  • Expiry date: 31/10/2024
  • Note: No testing performed on pop-up waste.
  • Size: 10mm compression
  • Marking: AXOR on front base of body
  • Installation Requirements R001 R006 R010
  • Model
    17 030 xxx AXOR Carlton Where xxx denotes finish available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905065

Range of overhead shower outlets with brass bodies (various finishes). Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1905065
  • Expiry date: 31/05/2024
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on face of shower
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Raindance Select E 27 384 xxx & 27 385 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905047

Range of single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1905047
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided thermoplastic silicone lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR on base of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    14 850 XXX AXOR UNO SINGLE LEVER KITCHEN MIXER Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905045

Deck mounted three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and stainless steel braided PEX lined flexible connecting hose assemblies, (to be installed between the side valves and the spout). Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1905045
  • Expiry date: 31/05/2024
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
  • Marking: Hansgrohe on spout
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    71 133 xxx Hansgrohe Logis 3-hole basin mixer 150 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906013

Range of wall mounted exposed thermostatic shower mixing valve with brass bodies (various finish) incorporating a ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Model 13108 incorporates a manual diverter headwork which controls flow and diverts water to either handset or shower head with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1906013
  • Expiry date: 30/06/2024
  • Note: This approval does not include a shower hose or handset.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on front of valve body.
  • Installation Requirements R001 R010 R040
  • Model
    13 102 xxx Hansgrohe ShowerTablet 350 & 13 108 xxx Hansgrohe ShowerTablet 600 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906018

Range of two-hole, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1906018
  • Expiry date: 30/06/2024
  • Note: The basic sets are not approved in their own right.
  • Size: ½” BSP (F)
  • Marking: AXOR on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    38 121 xxx Axor Uno & 38 122 xxx Axor Uno finish sets for use with 13622180+13623180 basic sets. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. .
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906035

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate plastic/rubber aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1906035
  • Expiry date: 30/06/2024
  • Size: ½” BSP (F)
  • Marking: Axor on spout.
  • Installation Requirements R001 R010 R040
  • Model
    Basic set (concealed part): 10 303 180 Axor for use with trim sets: 10 313 xxx Axor Starck 3 16 532 xxx Axor Montreux 16 534 xxx Axor Montreux, 39 143 xxx Axor Citterio 39 147 xxx Axor Citterio 39 313 xxx Axor Citterio 39 315 xxx Axor Citterio 39 144 xxx Axor Citterio 39 148 xxx Axor Citterio 39 314 xxx Axor Citterio 39 316 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906051

Range of overhead shower outlets with brass bodies (various finishes). Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1906051
  • Expiry date: 30/06/2024
  • Note: Open outlet use only.
  • Size: ½” BSP male
  • Marking: Hansgrohe on faceplate
  • Installation Requirements R001 R040
  • Model
    27 372 xxx Hansgrohe Raindance E Overhead shower 420 1jet with shower arm 27 373 xxx Hansgrohe Raindance E Overhead shower 420 2jet with shower arm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906094

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic/rubber aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1906094
  • Expiry date: 30/06/2024
  • Size: Stainless steel braided, PE-X lined flexible hose assemblies with 3/8” captive nut.
  • Marking: AXOR on side of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    38 830 xxx Axor Uno² & 39 850 xxx Axor Citterio. Model added May 2021: 39 853 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906108

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1906108
  • Expiry date: 30/06/2024
  • Note: 13 622 180 Basic rough in set is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe PuraVida models: Hansgrohe on face plate. AXOR Uno 38 112 xxx & 38 115 xxx models + AXOR Citterio 39 112 xxx & 39 115 xxx models: AXOR on face plate. AXOR Uno 38 113 xxx & 38 116 xxx models + AXOR Citterio 39 113 xxx & 39 116 xxx models: AXOR on spout.
  • Installation Requirements R001 R010 R040
  • Model
    13 622 180 Basic rough in set for use with the following trim set and headwork models. Hansgrohe PuraVida: 15 084 xxx, 15 085 xxx. AXOR Uno: 38 112 xxx, 38 113 xxx, 38 115 xxx, 38 116 xxx. AXOR Citterio: 39 112 xxx, 39 113 xxx, 39 115 xxx, 39 116 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905035

Range of wall mounted shower outlets (with shower arm: with brass bodies in a range of finishes. 24 002/24 012 models are wall mounted with a shower arm. 24 003/24 013 models have a ceiling mounted shower arm. Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1905035
  • Expiry date: 31/05/2024
  • Note: Open outlet use only. The 24 010 180 basic set and 01 800 180 iBox rough in set are not approved in their own right
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012) Axor on shower plate (Models 35 274, 35 278 & 35 277)
  • Installation Requirements R001 R040
  • Model
    24 002 400 Hansgrohe Rainmaker Select 460 1jet overhead shower with ceiling connector 100 mm 24 002 600 Hansgrohe Rainmaker Select 460 1jet overhead shower with ceiling connector 100 mm 24 012 400 Hansgrohe Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 100 mm 35 277 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector with rough 24 010 180 Rainmaker Select Basic set for overhead shower with ceiling connector 24 003 400 Hansgrohe Rainmaker Select 460 1jet overhead shower with shower arm 460 mm 24 003 600 Hansgrohe Rainmaker Select 460 1jet overhead shower with shower arm 460 mm 24 013 400 Hansgrohe Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with shower arm 460 mm 35 274 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with shower arm and softcube escutcheons 35 278 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with shower arm and square escutcheons -400 (White/Chrome) and -600 (Black/Chrome) -xxx available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907026

Range of installation kit with brass bodies and plastic housing with multiple inlets. The kits incorporate housings that are intended for a flow control cartridge and spout connection. Maximum operating temperature 60°C

  • Section: 0681 Combination Tap Assemblies
  • Section Subtitle: Miscellaneous.
  • WRAS Approval Number: 1907026
  • Expiry date: 31/07/2024
  • Note: Open outlet use only
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on adhesive label on the inside of the plastic housing
  • Installation Requirements R001 R040
  • Model
    01 750 180 Axor Basic set iBox universal. 01 850 180 Hansgrohe Basic set iBox universal. 16 182 180 Axor Uno Basic set. 30 132 210 Basic set iBox universal. 31 800 180 Basic set iBox universal. 01 800 180 Hansgrohe Basic set iBox universal. 01 700 180 AXOR Basic set iBox universal
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907028

Range of wall mounted concealed thermostatic blending valves with brass body. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1907028
  • Expiry date: 31/07/2024
  • Size: ½” BSP (F)
  • Marking: Hansgrohe and AXOR on wall plate
  • Installation Requirements R001 R010 R040
  • Model
    10 710 xxx AXOR Starck. 10 716 xxx AXOR Starck X. 11 730 xxx AXOR Urquiola. 12 710 xxx AXOR Starck Organic. 16 810 xxx AXOR Montreux. 34 715 xxx AXOR Citterio M. 38 375 xxx AXOR Uno. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907029

Raindance Rainmaker concealed installation set and overhead showers outlets with brass bodies (various finishes). The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1907029
  • Expiry date: 31/07/2024
  • Note: Open outlet use only. The 28 414 180 concealed installation set is not approved in its own right
  • Size: Stainless steel braided silicone lined hose assemblies with ½” BSP male end connections
  • Marking: Hansgrohe on face of shower
  • Installation Requirements R001 R009 R040
  • Model
    28 414 180 concealed installation set for use with Hansgrohe Raindance Rainmaker 28 417 xxx & 28 418 xxx shower outlets. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907326

Range of wall mounted thermostatic shower valves with brass bodies (various finishes) incorporating a 2 way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic strainer. The overhead shower inlets incorporate a combined washer and stainless steel strainer. The overhead shower inlets on the 27 268 & 27 281 models also incorporate plastic flow regulators. The inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1907326
  • Expiry date: 31/07/2024
  • Size: ½” x ¾” BSP off set unions
  • Marking: Hansgrohe on valve body, shower head and handset holder on riser
  • Installation Requirements R001 R010 R040
  • Model
    27 268 xxx HG Crometta S 240 SHP EcoSmart 9l/min chrom. 27 267 xxx HG Crometta S 240 Showerpipe chrom. 27 281 xxx HG Crometta E 240 SHP EcoSmart 9l/min chrom. 27 271 xxx HG Crometta E 240 Showerpipe chrom. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907329

Range of wall mounted bath spout outlets with brass bodies (various finishes) with a plastic aerator incorporated into the outlet. Maximum operating temperature 60°C

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1907329
  • Expiry date: 31/07/2024
  • Note: Open outlet use only
  • Size: ½” BSP (M)
  • Marking: AXOR on body
  • Installation Requirements R001 R040
  • Model
    46 410 xx0. 46 411 xx0 (diamond cut). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907330

Range of ceiling mounted shower units having a 4 jet spray pattern with some outlets incorporating a plastic aerator. The 10 628 & 10 629 include a built-in lighting system. The shower units are supplied in a range of finishes. Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1907330
  • Expiry date: 31/07/2024
  • Note: The 10 922 180 AXOR Basic set is not approved in its own right. Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Axor on shower face
  • Installation Requirements R001 R040
  • Model
    10 922 180 AXOR Basic set for ShowerHeaven 1200/300 4jet 10 628 XXX AXOR ShowerHeaven 1200/300 4jet with lighting 2700 K, 10 629 XXX AXOR ShowerHeaven 1200/300 4jet with lighting 3500 K, 10 637 XXX AXOR ShowerHeaven 1200/300 4jet without lighting. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907339

Shower set comprising of a shower hose, shower handset and wall mount. The shower outlet on the wall mount incorporates an approved single check valve (however the complete assembly has not been tested to verify it provides backflow protection). The shower handset incorporates a stainless-steel strainer and integral flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1907339
  • Expiry date: 31/07/2024
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: AXOR on hose & handset
  • Installation Requirements R001 R040
  • Model
    46 520 xx0 & 46 521 xx0 AXOR Edge Porter: Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907340

‘Hansgrohe Novus’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The product also incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet connections also incorporate an approved check valve cartridge however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1907340
  • Expiry date: 31/07/2024
  • Note: This approval does not include a shower hose and handset.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R030
  • Model
    Hansgrohe Novus range 71 321 xxx & 71 324 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907345

Range of wall mounted, manually blended shower valves with brass bodies (various finishes) with a ceramic cartridge headwork and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1907345
  • Expiry date: 31/07/2024
  • Note: This approval does not include a shower hose and handset
  • Size: ¾” BSP (F)
  • Marking: AXOR on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    46 650 xxx & 46 651 xxx AXOR Edge. Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907349

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes). Incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 1907349
  • Expiry date: 31/07/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR logo on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    46 210 xx0 AXOR Edge 46 211 xx0 AXOR Edge Where xx denotes the surface finish (which is a non-water contact part). It will always be 2 digits, which can be any combination of numbers, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907353

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1907353
  • Expiry date: 31/07/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR logo on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    46 020 xx0 AXOR Edge 46 021 xx0 AXOR Edge Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907354

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1907354
  • Expiry date: 31/07/2024
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR logo on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    46 010 xxx AXOR 46 011 xxx AXOR 46 030 xxx AXOR 46 031 xxx AXOR Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907355

Range of floor mounted, single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1907355
  • Expiry date: 31/07/2024
  • Note: 10 452 180 AXOR Starck basic set floor standing is not approved in its own right.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR logo on body
  • Installation Requirements R001 R010 R040
  • Model
    10 452 180 AXOR Starck basic set floor standing to be installed in conjunction with: 46 040 xxx AXOR Edge Single lever basin mixer floor standing with push-open waste set 46 041 xxx AXOR Edge Single lever basin mixer floor standing with push-open waste set - diamond cut Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909050

Ceramic mixing cartridge with plastic bodies and rubber ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 1909050
  • Expiry date: 30/09/2024
  • Size: 32mm
  • Marking: Hansgrohe on body.
  • Installation Requirements R001
  • Model
    30731900 mixing cartridge M32
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Kreuzwegstrasse 41 D-77656 Offenburg
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909051

Range of single hole, single outlet fixed combination tap assemblies (various finishes) incorporating quarter turn ceramic disc headworks with dome type operating members. The temperature is controlled via a thermostatic mixing cartridge with dome type operating member. The spout outlet incorporates an adjustable rubber spray insert. The inlet hoses each incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1909051
  • Expiry date: 30/09/2024
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PE-X lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: AXOR on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    12 010 xxx Axor Starck Organic 2-handle basin mixer 80 with pop-up waste set 12 011 xxx Axor Starck Organic 2-handle basin mixer 80 without pull-rod 12 012 xxx Axor Starck Organic 2-handle basin mixer 170 without pull-rod for wash bowls 12 013 xxx Axor Starck Organic 2-handle basin mixer 240 without pull-rod for wash bowls 12 014 xxx Axor Starck Organic 2-handle basin mixer 50 with pop-up waste set for hand wash basins available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909075

Range of four hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset. The shower handset inlet incorporates a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

  • Section: 0680 Combination Tap Assemblies
  • Section Subtitle: Four hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1909075
  • Expiry date: 30/09/2024
  • Note: The 13 244 180 rough in set is not approved in its own right
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on spout and shower handset.
  • Installation Requirements R001 R006 R020
  • Model
    71 748 000 Hansgrohe Talis E 4-hole rim-mounted bath mixer. 72 419 000 Hansgrohe Talis S 4-hole rim-mounted bath mixer. Both are to be installed with the 13 244 180 rough in set.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909088

Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members (depending on model). The temperature is controlled independently via a thermostatic cartridge with single lever, cube type, dome type or cross top operating members (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1909088
  • Expiry date: 30/09/2024
  • Note: This approval does not include a shower hose and handset The 01 800 180 concealed installation set is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: AXOR on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    Concealed installation set 01 800 180 for use with finish sets: 10 720 xxx AXOR Starck 10 726 xxx AXOR Starck X 11 733 xxx AXOR Urquiola 12 716 xxx AXOR Starck Organic 15 771 xxx Hansgrohe PuraVida 16 820 xxx AXOR Montreux 16 821 xxx AX Montreux 17 725 xxx AXOR Carlton 18 750 xxx AXOR Massaud 34 725 xxx AXOR Citterio M 38 720 xxx AXOR Uno 39 720 xxx AXOR Citterio 39 725 xxx AXOR xxx denotes the finish and is replaced with: 000 – Chrome 020 – PVD polished chrome 260 – PVD brushed chrome 830 – PVD polished nickel 820 – PVD brushed nickel 990 – PVD polished gold optic 250 – PVD brushed gold optic 300 – PVD polished red gold 310 – PVD brushed red gold 130 – PVD polished bronze 140 – PVD brushed bronze 330 – PVD polished black chrome 340 – PVD brushed black chrome 930 – PVD polished brass 950 – PVD brushed brass 800 – PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907356

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1907356
  • Expiry date: 31/07/2024
  • Note: This approval does not include a shower hose and handset, overhead shower or bath spout.
  • Size: ¾” BSP (F)
  • Marking: AXOR on face plate
  • Installation Requirements R001 R010 R040
  • Model
    46 420 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination, 46 421 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination – Diamond cut, 46 450 xx0 AXOR Edge Single lever bath mixer for concealed installation, 46 451 xx0 AXOR Edge Single lever bath mixer for concealed installation – Diamond cut. To be used in conjuction with I-Box 01700180 Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909333

Manual, click type cartridge headwork with a plastic body, EPDM ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 1909333
  • Expiry date: 30/09/2024
  • Size: 24mm OD
  • Marking: Hansgrohe, model & technical information on body.
  • Installation Requirements R001
  • Model
    95758000
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910321

Raindance Select E range of wall ceiling or wall mounted shower outlets having brass bodies. Maximum operating temperature 70°C

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1910321
  • Expiry date: 31/10/2024
  • Size: ½” BSP(M)
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    26 608 xxx Hansgrohe Raindance Select E overhead shower 300 2jet EcoSmart. 26 609 xxx Hansgrohe Raindance Select E overhead shower 300 2jet EcoSmart. ‘xxx’ denotes the finish which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910325

Range of handshowers having a plastic body (with various finishes) EPDM ‘o’ rings. Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1910325
  • Expiry date: 31/10/2024
  • Note: Open outlet use only
  • Size: ½” BSP (M)
  • Marking: AXOR on body
  • Installation Requirements R001 R040
  • Model
    45 720 xxx Axor one hand shower 2jet Where xxx denotes the surface finish, which can be replaced by: -000 Chrome/Mirror Glass -350 Satin black/black -360 Satin black/Brushed bronce -600 Chrome/Black Glass -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic -670 matt black, -700 matt white
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910331

Spout outlet with brass body (various finishes) incorporating a plastic spray outlet. Maximum operating temperature 70°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1910331
  • Expiry date: 31/10/2024
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    32 543 xxx Hansgrohe Metropol. ‘xxx’ denotes the surface finish and can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910333

Range of combined bath filler, waste and overflow assemblies (plastic body - various finishes). The outlets incorporate plastic aerator. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1910333
  • Expiry date: 31/10/2024
  • Note: Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN R090 applies.
  • Size: ¾” BSP(M)
  • Marking: Hansgrohe on trim set
  • Installation Requirements R001 R090 R160
  • Model
    58 112 xxx 58 309 xxx 58117 xxx 58 304 xxx 58 115 180 58 305 180 58 116 180 58 306 180 Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910006

Range of overhead shower outlets with chromium plated plastic bodies. The 26 464 xxx model incorporates an EPDM seal and plastic strainer on the inlet. The 26 465 xxx model incorporates a combined EPDM seal and stainless steel strainer, as well as a plastic flow regulator on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1910006
  • Expiry date: 31/10/2024
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on edge of shower head.
  • Installation Requirements R001 R040
  • Model
    26 464 xxx Hansgrohe Croma Overhead shower 220 1jet 26 465 xxx Hansgrohe Croma Overhead shower 220 1jet EcoSmart Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910043

Range of three hole, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes, see model), incorporating quarter turn ceramic disc headworks and dome type operating members located on the supplied basic set (18 113 180) (brass finish). Outlet Incorporates a stainless steel strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1910043
  • Expiry date: 31/10/2024
  • Size: ½” BSP (F)
  • Marking: AXOR on body.
  • Installation Requirements R001 R010 R040
  • Model
    18 112 xxx AXOR Massaud 3-hole basin mixer for concealed installation with spout 170 mm wall-mounted 18 115 xxx AXOR Massaud 3-hole basin mixer for concealed installation with spout 262 mm wall-mounted Basic set = 18 113 180 available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910048

Range of shower handsets (brass body – various finishes) incorporating stainless steel strainer located on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1910048
  • Expiry date: 31/10/2024
  • Note: Open outlet use only
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    28 580 xxx Hansgrohe Croma 100 Mono hand shower 28 583 xxx Hansgrohe Croma 100 Mono hand shower EcoSmart 9 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910334

Range of three hole, single outlet (fixed) combination tap assembles with brass bodies (in various finishes). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a rubber aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1910334
  • Expiry date: 31/10/2024
  • Size: Stainless steel braided TPSiV lined hose assembly incorporating 3/8” captive nut end connections.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    31 304 xx0 31 306 xx0 31 330 xx0 31 305 xx0 31 307xx0 31 331 xx0 31 073 xx0 Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910019

Single hole, single outlet (fixed) combination tap assembly with a brass body (various finishes, see model) incorporating ceramic cartridge headwork, and single lever operating member. The spout outlet incorporates a rubber aerator Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1910019
  • Expiry date: 31/10/2024
  • Size: Stainless steel braded thermoplastic silicone rubber (TPSiV) lined flexible hoses with ⅜” captive nut end connections
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 931 xxx Hansgrohe Focus Single lever bath mixer Monotrou Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910026

Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product includes a metal backnut and is supplied with a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.

  • Section: 0655 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1910026
  • Expiry date: 31/10/2024
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on front base of spout and operating member
  • Installation Requirements R001 R006 R007 R030
  • Model
    71 730 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer 71 731 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911342

Range of wall mounted, concealed thermostatic shower valves (brass bodies), incorporating a half turn ceramic disc headwork controlling the flow to either shower outlet with various operating member options depending on model variations. The temperature is controlled independently via a thermostatic cartridge also using various operating members which incorporates a manual override button. Inlet incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1911342
  • Expiry date: 30/11/2024
  • Note: This approval does not include a shower hose or handset. The 01 800 180 basic set is not approved in its own right
  • Size: ¾” BSP (F) x ½” BSP (F) reducer
  • Marking: Axor on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    10 720 xxx AXOR Starck 10 726 xxx AXOR Starck X 11 733 xxx AXOR Urquiola 12 716 xxx AXOR Starck Organic 15 771 xxx Hansgrohe PuraVida 16 820 xxx AXOR Montreux 17 725 xxx AXOR Carlton 18 750 xxx AXOR Massaud 34 725 xxx AXOR Citterio 38 720 xxx AXOR Uno 39 720 xxx AXOR Citterio 39 725 xxx AXOR Citterio Basic set – 01 800 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911344

Open outlet use only. The 47 412 xxx must be installed with a cover plate to maintain the validity of this approval. Cover plates for this model are not supplied and must be purchased separately

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1911344
  • Expiry date: 30/11/2024
  • Note: Open outlet use only. The 47 412 xxx must be installed with a cover plate to maintain the validity of this approval. Cover plates for this model are not supplied and must be purchased separately.
  • Size: ½” BSP (M)
  • Marking: Axor on body
  • Installation Requirements R001 R040
  • Model
    47 410 xxx AXOR MyEdition Bath spout. 47 412 xxx AXOR MyEdition Bath spout (without covering plate). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910323

Range of wall mounted thermostatic shower valves with brass bodies (various finishes) Incorporating ceramic disc headworks, and dome type operating members and a self cancelling diverter to the shower outlets. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic flow regulator. Inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1910323
  • Expiry date: 31/10/2024
  • Size: ¾” x ½” BSP(M) off set union.
  • Marking: Hansgrohe logo on handshower and valve body.
  • Installation Requirements R001 R030
  • Model
    27 298 xxx Crometta Showerpipe 240 1jet 27 320 xxx Crometta Showerpipe 240 1jet Where xx denotes the surface finish (which is a non-water contact part). It will always be 2 digits, which can be any combination of numbers, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001055

Range of wall and deck mounted spout outlets (brass body with various finishes), incorporating a plastic aerator (19 415 xxx model) or an aerator comprising of a plastic housing and rubber aerator outlet (all other models with the exception of the 10 426 xxx model). Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 2001055
  • Expiry date: 31/01/2025
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: 10 426 – Axor & Hansgrohe on Spout 13 413 – Hansgrohe on Spout 31 494 – Hansgrohe on Spout Bezzel 13 414 – Hansgrohe on Spout 14 420 – Hansgrohe on Spout 19 415 – Axor, Hansgrohe & Bourellec on Spout 38 410 – Axor & Uno on Spout
  • Installation Requirements R001 R040
  • Model
    10 426 xxx Axor Starck Bath Spout 13 413 xxx Hansgrohe Metris Bath Spout 31 494 xxx Hansgrohe Metris Bath Spout 13 414 xxx Hansgrohe Bath Spout 14 420 xxx Hansgrohe Metropol S Bath Spout 19 415 xxx Axor Bouroullec Bath Spout 38 410 xxx Axor Uno Bath Spout Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001106

Deck mounted spout outlet (brass body with various finishes), incorporating a plastic aerator. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 2001106
  • Expiry date: 31/01/2025
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: 19 417 – Axor, Hansgrohe & Bourellec on Spout
  • Installation Requirements R001 R006
  • Model
    19 417 xxx Axor Bouroullec Bath Spout Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001334

Range of three hole, single outlet (fixed) combination tap assemblies (having various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is connected via stainless steel braided PE-X lined interconnecting hoses. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2001334
  • Expiry date: 31/01/2025
  • Size: ½” BSP (F)
  • Marking: Axor on spout
  • Installation Requirements R001 R006 R007 R010
  • Model
    46 050 xx0 Axor Edge 46 051 xx0 Axor Axor Edge
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001090

Single hole, single outlet (fixed) combination tap assembly (various finishes), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber aerator. Product is supplied with a lever type pop-up waste Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2001090
  • Expiry date: 31/01/2025
  • Size: Stainless steel PEX lined flexible hose with 3/8” BSP captive nut end connections
  • Marking: AXOR on front of tap body
  • Installation Requirements R001 R006 R009 R010
  • Model
    10 015 xxx Available in customised finishes ‘xxx’ denotes the finish: - 000 Chrome - 020 PVD polished chrome - 260 PVD Brushed chrome - 830 PVD Polished nickel - 820 PVD Brushed nickel - 990 PVD Polished gold optic - 250 PVD Brushed gold optic - 300 PVD Polished red gold - 310 PVD Brushed red gold - 130 PVD Polished bronze - 140 PVD Brushed bronze - 330 PVD Polished black chrome - 340 PVD Brushed Black chrome - 930 PVD Polished brass - 950 PVD Brushed brass - 800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003007

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, multiple finishes), incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a rubber aerator and the products are supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003007
  • Expiry date: 31/03/2025
  • Note: No testing has been performed on the pop-up waste.
  • Size: Stainless Steel braided PEX lined flexible hose assemblies with ⅜" BSP captive nut connections.
  • Marking: AXOR on front of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    17 010 xxx 17 010 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers, as examples: 000 = chrome finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003052

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes, see model), incorporating a quarter turn ceramic disc headwork with cross top or dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60 °C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003052
  • Expiry date: 31/03/2025
  • Size: stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" BSP captive nut end connections.
  • Marking: Hansgrohe on front of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    71 280 xxx Logis M31 2-handle kitchen mixer 220 (Dome) 71 285 xxx Logis M32 Classic 2-handle kitchen mixer 220 (Cross) Model added February 2021: 71 283 xxx Logis M32 2-handle kitchen mixer 220 Eco Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD Stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004021

Range of concealed, thermostatic blending valves (brass body). The flow is controlled via ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2004021
  • Expiry date: 30/04/2025
  • Note: The Hansgrohe iBox 01800180 is not covered by this approval.
  • Size: Body for insertion into Hansgrohe iBox 01800180 (not supplied)
  • Marking: AXOR on faceplate
  • Installation Requirements R001 R010 R040
  • Model
    36 707 xxx Axor ShowerSelect 36 715 xxx Axor ShowerSelect 36 723 xxx Axor ShowerSelect Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004024

Range of shower handsets with chromium plated bodies. The products incorporate a strainer (stainless steel or plastic) at the inlet. All models, except 28 539 xxx, incorporate a plastic flow regulator at the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2004024
  • Expiry date: 30/04/2025
  • Note: Open outlet use only. Claims of flow rate are made by the manufacturer and not considered part of the listing.
  • Size: ½” BSP (M).
  • Marking: Hansgrohe, Croma and NF logo on body.
  • Installation Requirements R001 R040
  • Model
    28 535 xxx Hansgrohe Croma 100 Vario hand shower. 28 537 xxx Hansgrohe Croma 100 Vario hand shower EcoSmart 9 l/min. 28 536 xxx Hansgrohe Croma 100 Multi hand shower . 28 538 xxx Hansgrohe Croma 100 Multi hand shower EcoSmart 9 l/min. 28 539 xxx Hansgrohe Croma 100 Classic Multi hand shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004026

Range of overhead shower outlets (various finishes) and concealed installation sets. Models 24 006 400, 24 016 400, 24 017 400, 35 281 xxx and 35 282 xxx incorporate a stainless-steel strainer on the inlet of and a plastic aerator on the shower head outlet. Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2004026
  • Expiry date: 30/04/2025
  • Note: Open outlet use only. The concealed installation sets are not approved in their own right.
  • Size: ½” BSP (M). ¾” BSP x ½” adapter.
  • Marking: Hansgrohe on shower plate.
  • Installation Requirements R001 R040
  • Model
    Models for use with concealed installation set 24 010 180 Hansgrohe Rainmaker Select Basic: 24 006 400 Hansgrohe Rainmaker Select 460. 24 006 600 Hansgrohe Rainmaker Select 460. 24 016 400 Hansgrohe Rainmaker Select 460. 35 281 xxx AXOR ShowerSolutions Overhead shower 460/300. Models for use with concealed installation set 01800180: 24 007 400 Hansgrohe Rainmaker Select 460. 24 007 600 Hansgrohe Rainmaker Select 460. 24 017 400 Hansgrohe Rainmaker Select 460. 35 276 xxx AXOR ShowerSolutions Overhead shower 460/300. 35 282 xxx AXOR ShowerSolutions Overhead shower 460/300. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004339

Thermostatic mixing valve with a brass body (chromium plated) with EPDM ‘O’-rings. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2004339
  • Expiry date: 30/04/2025
  • Size: ⅜” captive nut x ⅜” BSP (M)
  • Marking: Hansgrohe and date of manufacture (DDD.YYYY) on body
  • Installation Requirements R001 R010 R040
  • Model
    30 71 62 18
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006014

Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 60°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 2006014
  • Expiry date: 30/06/2025
  • Note: Open outlet use only
  • Size: ½” captive nut end connections
  • Marking: Hansgrohe on conical nut
  • Installation Requirements R001
  • Model
    28 272 xxx Hansgrohe Isiflex. 28 274 xxx Hansgrohe Isiflex. 28 276 xxx Hansgrohe Isiflex. 28 278 xxx Hansgrohe Isiflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Models ending 002 are hoses sold in blister packs. These are only available in chrome.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S & Hansgrohe SE
    Company Name
    Hansgrohe Wasselonne S.A.S & Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006045

Range of wall mounted shower outlets with brass bodies (various finishes). The 24 004 xxx, 24 014 xxx and 35 279 xxx models are supplied with ceiling mounted shower arm. The 24 005 xxx, 24 015 xxx, 35 275 xxx and 35 280 xxx supplied with wall mounted shower arm. The 24 005 xxx, 24 015 xxx, 35 275 xxx & 35 280 xxx models incorporate stainless steel strainers on the inlet. The 24 014 xxx & 24 015 xxx models incorporate plastic flow regulators on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2006045
  • Expiry date: 30/06/2025
  • Marking: 24 004 xxx, 24 014 xxx, 24 005 xxx & 24 015 xxx models: Hansgrohe on faceplate. 35 275 xxx & 35 280 xxx models: AXOR on faceplate.
  • Installation Requirements R001 R040
  • Model
    The following models are for use with the 24 010 180 Hansgrohe Rainmaker Select basic set overhead shower ceiling connector: 24 24 004 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower with ceiling connector 100 mm). 24 014 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower EcoSmart 9 l/ min with ceiling connector 100 mm). 35 279 xxx AXOR ShowerSolutions Overhead shower 460 / 300 (2jet with ceiling connector). The following models are for use with the 01 800 180 Basic set iBox universal: 24 005 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower with shower arm 450 mm). 24 015 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower EcoSmart 9 l/min with shower arm 450 mm). 35 275 xxx AXOR ShowerSolutions Overhead shower 460 / 300 (2jet with shower arm and softcube escutcheons). 35 280 xxx AXOR ShowerSolutions Overhead shower 460 / 300 (2jet with shower arm and square escutcheons). with rough 01800180 Where xxx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006331

Wall mounted concealed modular thermostatic mixing valve (brass body). The product is supplied with a shower hose and handset and incorporates additional outlet ports to supply shower outlet configuations controlled by push button flow control headworks. Primary flow control is via a half turn ceramic disc headwork and dome type operating member. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Inlets incorporate stainless steel strainers and single check valve cartirgdes however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2006331
  • Expiry date: 30/06/2025
  • Size: ¾” BSP (F) inlets & ½” BSP (F) outlets
  • Marking: Axor on faceplate and shower handset.
  • Installation Requirements R001 R010 R040
  • Model
    46 700 xxx AXOR EdgeThermostatic module Select 470/100 for concealed installation for 2 functions 46 701 xxx AXOR Edge Thermostatic module Select 470/100 for concealed installation for 2 functions - diamond cut 18 310 180 AXOR Basic set for thermostatic module Select for 2 functions. 46 710 xxx AXOR Edge Thermostatic module Select 540/100 for concealed installation for 3 functions 46 711 xxx AXOR Edge Thermostatic module Select 540/100 for concealed installation for 3 functions - diamond cut 18 311 180 AXOR Basic set for thermostatic module Select for 3 functions. 46 720 xxx AXOR Edge Thermostatic module Select 610/100 for concealed installation for 4 functions 46 721 xxx AXOR Edge Thermostatic module Select 610/100 for concealed installation for 4 functions - diamond cut 18 312 180 AXOR Basic set for thermostatic module Select for 4 functions. 46 730 xxx AXOR Edge Thermostatic module Select 680/100 for concealed installation for 5 functions 46 731 xxx AXOR Edge Thermostatic module Select 680/100 for concealed installation for 5 functions - diamond cut 18 313 180 AXOR Basic set for thermostatic module Select for 5 functions. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010701

Wall mounted bath spout incorporating a brass body (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 2010701
  • Expiry date: 31/10/2025
  • Marking: AXOR on top of spout. Urquiola on underside of spout.
  • Installation Requirements R001 R040
  • Model
    11 430 xxx AXOR Urquiola Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = Chrome optic finish, 800 = PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2008703

Wall mounted spout outlet (various finishes, see model) incorporating a plastic flow straightener. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 2008703
  • Expiry date: 31/08/2025
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe on spout
  • Installation Requirements R001 R040
  • Model
    15 412 xxx Hansgrohe PuraVida Bath spout Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish & 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007054

Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Both models incorporate a swivel joint housing a plastic flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2007054
  • Expiry date: 31/07/2025
  • Note: Open outlet use only. Claims for flow rate are made by the manufacturer and not considered part of the listing.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on edge of body
  • Installation Requirements R001 R040
  • Model
    26 469 xxx HG Raindance Select S Overhead shower 240 2jet EcoSmart 9 l/min with ceiling connector. 26 470 xxx HG Raindance Select S Overhead shower 240 2jet EcoSmart 9 l/min with shower arm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007075

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator and an on/off button which can stop the flow of water. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007075
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided PE-X lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    72 820 xxx 72 825 xxx 73 854 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006046

Range of overhead wall mounted shower outlets with brass bodies (various finishes), incorporating a plastic aerator and stainless-steel strainers on two of the three inlets to the main body. The 35 283 xxx models also incorporate plastic flow regulators on all three of the inlets to the main body. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2006046
  • Expiry date: 30/06/2025
  • Note: Open outlet use only. The iBox 01800180 rough-in (concealed) set is not approved in its own right. Claims of flow rate are made by the manufacturer and not considered part of the listing.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on spray plate. AXOR on spray plate (model 35 283 xxx)
  • Installation Requirements R001 R040
  • Model
    24 001 400 Hansgrohe Rainmaker Select 580 3jet overhead shower (white/chrome). 24 001 600 Hansgrohe Rainmaker Select 580 3jet overhead shower (black/chrome). 24 011 400 Hansgrohe Rainmaker Select 580 3jet overhead shower Ecosmart 9 l/min (white/chrome). 35 283 xxx AXOR ShowerSolutions Overhead shower 250/580 3jet. All the above items are for use in conjunction with the iBox 01800180 rough-in (concealed) set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009001

Range of wall mounted concealed manual blending valves with a DZR brass body incorporating a ceramic cartridge headwork with a single lever operating member, fitting is available with trim set (available in various finishes). Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2009001
  • Expiry date: 30/09/2025
  • Note: Rough in set 13 620 180 is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on top of operating member. DR on body
  • Installation Requirements R001 R010 R040
  • Model
    31 686 xxx HG Metris 31 967 xxx HG Focus 71 606 xxx HG Logis 31 966 xxx HG Focus To be used with basic set 13 620 180 “xxx” denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and letters examples: 000= Chrome optic finish, 800= PVD Stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009002

Wall mounted two hole, single outlet (swivel) combination tap assembly with DZR brass bodies (various finishes). Incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2009002
  • Expiry date: 30/09/2025
  • Note: For use with basic sets 13 622 180 (Models 34 112 xxx & 34 113 xxx) & 13 623 180 (Models 34 115 xxx & 34 116 xxx)
  • Size: ½” BSP (F)
  • Marking: Axor (brand name of Hansgrohe) on spout
  • Installation Requirements R001 R010 R040
  • Model
    34 112 xxx AXOR Citterio M (167mm and plate) 34 113 xxx AXOR Citterio M (167mm and escutcheons) 34 115 xxx AXOR Citterio M (227mm and plate) 34 116 xxx AXOR Citterio M (227mm and escutcheons) Where xxx denote the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letter, as examples; 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009007

Range of exposed wall mounted two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a two-way manual diverter controlling and diverting the flow between the spout outlet and an overhead shower (not supplied) and a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2009007
  • Expiry date: 30/09/2025
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on front of body.
  • Installation Requirements R001 R010 R040
  • Model
    13 107 xxx Hansgrohe ShowerTablet 350 Exposed Thermostatic Bath Mixer 13 109 xxx Hansgrohe ShowerTablet 600 Exposed Thermostatic Bath Mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010002

Pillar tap with brass body (various finishes), incorporating a quarter turn ceramic disc headwork and cross top operating member. The spout outlet incorporates an aerator. Maximum working pressure 10.0 bar. Maximum operating temperature is 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2010002
  • Expiry date: 31/10/2025
  • Size: 3/8” (F) Compression
  • Marking: AXOR on body.
  • Installation Requirements R001 R006
  • Model
    16 530 xxx AXOR Montreux Pillar tap 50 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Kreuzwegstrasse 41 D-77656 Offenburg
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2009004

Range of ceramic cartridge headworks incorporating plastic bodies and silicone ‘O’-rings, to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 2009004
  • Expiry date: 30/09/2025
  • Size: 25mm Ø
  • Marking: HG on body
  • Installation Requirements R001
  • Model
    30 579 600 HG Mixing cartridge M25 30 122 100 HG Mixing cartridge M25L 30 122 101 HG Mixing cartridge M25LA Models added April 2021: 30 746 700 Cartridge M25LS 30 333 001 Cartridge M25LXS
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011009

Thermostatic blending valve with brass body (various finishes), incorporating two push cartridges to control the water to the 2 outlets independently. The temperature is controlled also controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2011009
  • Expiry date: 30/11/2025
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on face plate.
  • Installation Requirements R001 R010 R040
  • Model
    15 765 xxx Hansgrohe ShowerSelect Thermostat Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011010

Three-hole, single outlet, fixed combination tap assembly with a brass body (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with lever type pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2011010
  • Expiry date: 30/11/2025
  • Size: Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hose with 3/8” BSP captive nut.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 073 xxx Hansgrohe Metris Classic 3-hole basin mixer 100 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011306

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011306
  • Expiry date: 30/11/2025
  • Note: No testing has bee performed on the pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    71164xxx - Hansgrohe Logis E OHM 70 CoolStart. 71165xxx - Hansgrohe Logis E OHM 100 CoolStart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011011

Wall mounted, exposed manual blending valve with brass body (various finishes) incorporating a ceramic cartridge headwork, which controls both temperature and flow and has a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2011011
  • Expiry date: 30/11/2025
  • Size: ¾” to ½” Offset Unions.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R010 R040
  • Model
    15 672 xxx Hansgrohe PuraVida Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011012

Single hole, single outlet (waterfall spout) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The inlets incorporate a stainless-steel strainer and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011012
  • Expiry date: 30/11/2025
  • Size: Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nuts.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010 R160
  • Model
    14 127 xxx Hansgrohe Talis Classic Single lever basin mixer 90 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Kreuzwegstrasse 41 D-77656 Offenburg
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011014

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Products come with pop up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011014
  • Expiry date: 30/11/2025
  • Note: No testing performed on the pop-up waste.
  • Size: Stainless steel or nylon braided PEX lined flexible hoses with 3/8” BSP (M) captive nut connections.
  • Marking: AXOR on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    34 010 xxx AXOR Citterio M with pop-up waste set 34 016 xxx AXOR Citterio M with pop-up waste set 34 017 xxx AXOR Citterio M with waste set 34 127 xxx AXOR Citterio M with waste set.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Kreuzwegstrasse 41 D-77656 Offenburg
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011015

Range of shower handsets, various finishes. All models incorporate a stainless-steel strainer in the inlet. The inlet of model 26 090 also incorporates a plastic flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2011015
  • Expiry date: 30/11/2025
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R040
  • Model
    Vernis Blend Hand shower Vario range: 26 090 xxx. 26 270 xxx. 26 340 xxx EcoSmart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011013

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating member. The spout outlets incorporate a plastic aerator. Some models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011013
  • Expiry date: 30/11/2025
  • Note: No testing has been performed on the pop-up waste.
  • Size: Stainless Steel braided, PEX lined flexible hose assemblies with a 3/8” BSP (F) captive nuts.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 075 xxx Hansgrohe Metris Classic with pop-up waste set. 31 077 xxx Hansgrohe Metris Classic without waste set. 31 078 xxx Hansgrohe Metris Classic for washbowls with pop-up waste set. 31 300 xxx Hansgrohe Metropol Classic with pop-up waste set. 31 301 xxx Hansgrohe Metropol Classic without waste set. 31 302 xxx Hansgrohe Metropol Classic with pop-up waste set. 31 303 xxx Hansgrohe Metropol Classic for washbowls with pop-up waste set. Where xxx denotes the surface finish which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006015

Range of shower hoses with LLDPE liners and plastic outer, available in a variety of finishes. Maximum operating temperature 65°C.

  • Section: 1860 Tubes
  • Section Subtitle: Plastic hoses.
  • WRAS Approval Number: 2006015
  • Expiry date: 30/06/2025
  • Note: Open outlet use only.
  • Size: ½” BSP captive nut
  • Marking: Hansgrohe or AXOR (brand of Hansgrohe) on captive nut.
  • Installation Requirements R001
  • Model
    Model: 28 278 xxx Hansgrohe IsIflex. 30 330 818 Isi. 30 723 718 Isiflex'B. 28 272 xxx Hansgrohe IsIflex. 30 182 018 Isi. 30 331 218 Isi. 28 622 xxx AXOR. 28 277 xxx Hansgrohe IsIflex. 28 712 xxx HG Isiflex B. 30 331 518 Isi. 30 922 118 Isiflex'B. 28 276 xxx Hansgrohe IsIflex. 30 182 118 Isi. 30 321 518 AX Isiflex Special. 30 331 618 Isi TPE. 30 331 688 HG Isi. 31 182 118 Isi. 32 182 118 Isi. 34 182 118 Isi. 28 626 xxx AXOR. 28 275 xxx Isiflex`C. 28 713 xxx HG Isiflex B. 30 331 718 Isi. 30 923 518 Isiflex'B. 28 245 xxx Hansgrohe Isiflex. 30 213 018 Isi. 28 274 xxx Hansgrohe Isiflex. 28 714 xxx HG Isiflex B. 30 182 218 Isi. 30 332 018 Isi. 30 332 088 HG Isi. 30 922 218 Isiflex'B. 31 182 218 Isi. 28 624 xxx AXOR. 30 899 618 Isiflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012021

Two-hole, single outlet, (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2012021
  • Expiry date: 31/12/2025
  • Size: ½” by ¾” BSP (M) Offset Unions.
  • Marking: AXOR (brand of Hansgrohe) on body.
  • Installation Requirements R001 R030
  • Model
    10 411 xxx AXOR Starck Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012028

Range of wall mounted, flow control valves with brass bodies and various trim sets (various finishes). Flow is controlled to the outlets via a push to on push to off ‘detent’ headwork. Maximum Working Pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2012028
  • Expiry date: 31/12/2025
  • Size: For insertion into Hansgrohe I-box with ¾” BSP (F) inlet/outlet
  • Marking: Hansgrohe or AXOR on backing plate.
  • Installation Requirements R001 R010 R040
  • Model
    Hansgrohe ShowerSelect Valve for concealed installation for 3 functions: 15 745 xxx 15 764 xxx 36 717 xxx AXOR - square 36 727 xxx AXOR - round 36 773 xxx AXOR - softcube Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/ or letters, as examples: 00 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101347

Angled stop valve with a chrome plated brass body and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2310 Valves
  • Section Subtitle: Stop, metal, screw down.
  • WRAS Approval Number: 2101347
  • Expiry date: 31/01/2026
  • Size: ½” BSP (M).
  • Marking: Hansgrohe on handle. HG and P797IA on body.
  • Installation Requirements R001
  • Model
    13901000
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101002

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Models 10 102 xxx & 10 103 xxx are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2101002
  • Expiry date: 31/01/2026
  • Size: Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP captive nut.
  • Marking: AXOR on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    AXOR Starck Single range: 10 001 xxx 10 003 xxx 10 007 xxx 10 102 xxx 10 103 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101006

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks with cross top type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2101006
  • Expiry date: 31/01/2026
  • Size: ½” BSP (f)
  • Marking: AXOR on spout
  • Installation Requirements R001 R010 R040
  • Model
    36 107 xxx AXOR Citterio E3-hole basin mixer for concealed installation wall-mounted with spout 220 mm and escutcheons 36 115 xxx AXOR Citterio E3-hole basin mixer for concealed installation wall-mounted with spout 220 mm 10 303 180 AXOR Basic set for 3-hole basin mixer for concealed installation wall-mounted Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101015

Range of single hole bidet taps with brass bodies (various finishes) and swivel spout outlets. The products incorporate a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a lever operated waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 2101015
  • Expiry date: 31/01/2026
  • Note: No testing has been performed on the pop-up waste.
  • Size: Stainless steel braided, PEX lined flexible hose assemblies with a 3/8” BSP captive nut end connection.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    71210XXX Vernis Blend with pop-up waste. 71211XXX Vernis Shape with pop-up waste. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101016

A range of single-hole, single outlet, (swivel) combination tap assemblies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models 71554XXX and 71564XXX are supplied with pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2101016
  • Expiry date: 31/01/2026
  • Note: No testing preformed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connection.
  • Marking: Hansgrohe on base of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    71554XXX - Vernis Blend. 71564XXX - Vernis Shape. 71870XXX - Vernis Blend M35. 71871XXX - Vernis Shape M35. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101056

Range of pillar taps with brass bodies (chromium plated) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2101056
  • Expiry date: 31/01/2026
  • Size: Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.
  • Marking: Hansgrohe on front of tap body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Vernis 71583XXX Vernis 71592XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101057

Range of single-hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and some models are supplied with pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2101057
  • Expiry date: 31/01/2026
  • Note: No testing performed on the pop-up wastes.
  • Size: Stainless steel braided PEX lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    Vernis Blend with pop-up waste: 71550XXX 71551XXX 71557XXX 71559XXX 71584XXX 71585XXX 71593XXX 71594XXX 71566XXX 71568XXX 71560XXX 71561XXX Vernis Blend without pop-up waste: 71558XXX 71569XXX 71567XXX 71580XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2101062

Range of wall mounted flow control valves and trim kits (various finishes) with brass bodies incorporating a quarter turn ceramic disc headwork with various operating members (see model). The outlet of all models, except for the 38 882 xxx AXOR Uno model, incorporates a single check valve cartridge, (verified by test suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 2101062
  • Expiry date: 31/01/2026
  • Size: ½” BSP (M)
  • Marking: AXOR or Hansgrohe on wall trim
  • Installation Requirements R001 R040
  • Model
    16 882 xxx Axor Montreux (cross top) 16 883 xxx Axor Montreux (single lever) 27 452 xxx Hansgrohe Fixfit (dome) 38 882 xxx Axor Uno (dome) 39 882 xxx Axor Citterio (single lever) 39 883 xxx Axor Citterio (cross top) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104013

Range of concealed thermostatic blending valves with brass bodies and trim sets (various finishes - see model). The temperature is controlled via a thermostatic cartridge with a dome type or single lever operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2104013
  • Expiry date: 30/04/2026
  • Note: The Hansgrohe iBox is not covered by this approval.
  • Size: Body for insertion into Hansgrohe iBox (018001810).
  • Marking: Hansgrohe on face plate.
  • Installation Requirements R001 R010 R040
  • Model
    15 705 xxx Hansgrohe Ecostat E Thermostat for concealed installation 15 755 xxx Hansgrohe Ecostat S Thermostat for concealed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104049

Range of wall mounted, thermostatic blending valves with brass bodies (various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member which incorporates a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2104049
  • Expiry date: 30/04/2026
  • Note: This approval does not include a shower hose and handset. The 01800180 Basic set iBox universal is not approved in its own right.
  • Size: ¾” BSP (F) (to 01800180 Basic set iBox universal)
  • Marking: AXOR on face plate.
  • Installation Requirements R001 R010 R040
  • Model
    Concealed body: 01800180 Basic set iBox universal for use with 46 750 xxx & 46 751 xxx trim and control sets. Trim and control sets: 46 750 xxx - AXOR Edge 46 751 xxx - AXOR Edge Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107043

Wall mounted, exposed, two-hole single outlet, fixed, combination tap assemblies (brass body – various finishes) incorporating two ‘detent’ (push to on push to off) headworks, one controlling the flow to the bath outlet and the other to the shower outlet. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets and the shower outlet incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate a stainless-steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0540 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, shower outlet.
  • WRAS Approval Number: 2107043
  • Expiry date: 31/07/2026
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (M).
  • Marking: Hansgrohe on top of body.
  • Installation Requirements R001 R010 R040
  • Model
    13 151 XXX ShowerTablet Select Bath thermostat 300 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107044

Range of single-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with click type or pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107044
  • Expiry date: 31/07/2026
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    HG LogisSingle: 71 070 xxx, 71 071 xxx, 71 072 xxx, 71 073 xxx, 71 077 xxx, 71 090 xxx, 71 091 xxx, 71 100 xxx, 71 101 xxx, 71 102 xxx, 71 103 xxx, 71 107 xxx, 71 170 xxx & 71 171 xxx. HG CostCo Logis: 71 152 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Sanitary Ware Products (Shanghai)
    Company Name
    Hansgrohe Sanitary Ware Products (Shanghai)
    Address
    Auestrasse 5-9 D77761 Schiltach Germany
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107045

Concealed installation set for use with wall mounted overhead shower outlets (brass body – various finishes). The inlet to the shower outlet incorporates a stainless-steel strainer, a plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2107045
  • Expiry date: 31/07/2026
  • Note: Open outlet use only. The 28 486 180 concealed installation set is not approved in its own right.
  • Size: Concealed installation set: ½” BSP (F). Shower outlets: ½” BSP (M).
  • Marking: AXOR on body.
  • Installation Requirements R001 R040
  • Model
    Concealed installation set: 28 486 180 AXOR ShowerSolutions Basic set. Shower outlets: 28 491 xxx AXOR ShowerSolutions, 36 822 xxx AXOR Citterio E. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107046

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 110 000 model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2107046
  • Expiry date: 31/07/2026
  • Note: No testing performed on pop-up waste
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections
  • Marking: AXOR on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    36 110 xxx AXOR Citterio E, 36 111 xxx AXOR Citterio E, 36 112 xxx AXOR Citterio E, 36 113 xxx AXOR Citterio E. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107050

Bath spout outlet with a brass body (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 2107050
  • Expiry date: 31/07/2026
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: AXOR on spout
  • Installation Requirements R001 R040
  • Model
    36 425 xxx AXOR Citterio E Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107096

Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies and trim sets (various finishes). The temperature is controlled via a thermostatic cartridge with a cross top or single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2107096
  • Expiry date: 31/07/2026
  • Note: I-box rough in sets: 01800180, 01810180 & 01700180 are not approved in their own right.
  • Size: Body for insertion into Hansgrohe iBox 01800180 & 01810180 & 01700180
  • Marking: Hansgrohe or Axor on faceplate.
  • Installation Requirements R001 R010 R040
  • Model
    15 741 xxx Hansgrohe ShowerSelect S Highflow 31 571 xxx Hansgrohe Metris Highflow 15 734 400 Hansgrohe ShowerSelect Glass 15 734 600 Hansgrohe ShowerSelect Glass 15 772 xxx Hansgrohe PuraVida Highflow 15 760 xxx Hansgrohe ShowerSelect 38 715 xxx Axor Uno Highflow 36 711 xxx Axor ShowerSelect Soft 10 715 xxx Axor Starck Highflow 10 717 xxx Axor Starck X Highflow 12 711 xxx Axor Starck Organic Highflow 11 731 xxx Axor Urquiola Highflow 17 712 xxx Axor Carlton Highflow 36 718 xxx Axor ShowerSelect Square Highflow 36 721 xxx Axor ShowerSelect Round 16 815 xxx Axor Montreux Highflow 34 716 xxx Axor Citterio M Highflow 39 711 xxx Axor Citterio Highflow 39 716 xxx Axor Citterio Highflow 18 741 xxx Axor Massaud Highflow 19 702 xxx Axor Bouroullec Highflow 15 706 xxx Hansgrohe Ecostat E 15 756 xxx Hansgrohe Ecostat S 16 824 xxx Axor Montreux Thermostatic Models added January 2022: 46 740 xxx Axor Edge Highflow 46 741 xxx Axor Edge Highflow Diamond Cut All of the above are to be installed in conjunction with the I-box rough in sets: 01800180, 01810180 & 01700180. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111702

Shower handset with brass body (various finishes). The inlet incorporates a stainless-steel strainer. Maximum operating temperature 65°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2111702
  • Expiry date: 30/11/2026
  • Note: Open outlet use only
  • Size: 1/2" BSP (M)
  • Marking: Axor on body.
  • Installation Requirements R001 R040
  • Model
    16 320 xxx AXOR Montreux Hand shower 100 1jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109057

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see models) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products are supplied with either a lever type waste (model 39 034) or screw down waste (39 037). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2109057
  • Expiry date: 30/09/2026
  • Size: stainless steel or nylon braided, PEX lined flexible hoses with 3/8” BSP captive nut end connectors.
  • Marking: Axor on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    AXOR Citterio Single lever basin mixer 190 with pin handle 39 034 xxx pop-up waste set 39 037 xxx screw down waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112702

Range of overhead shower outlets with chromium plated plastic bodies incorporating stainless steel strainers on the inlets. Models 26 724 xxx & 26 727 xxx incorporate a plastic flow regulator on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2112702
  • Expiry date: 31/12/2026
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on shower face.
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Crometta E Overhead shower 240: 26 722 xxx 1jet LowPressure 26 726 xxx 1jet 26 727 xxx 1jet EcoSmart 9 l/min Hansgrohe Crometta S Overhead shower 240: 26 723 xxx 1jet 26 724 xxx 1jet EcoSmart 9 l/min 26 725 xxx 1jet LowPressure Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110016

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies, comprising of a concealed brass body, and a separate trim set (brass body - various finishes), incorporating a ceramic cartridge headwork with a joystick type operating member and a spout outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2110016
  • Expiry date: 31/10/2026
  • Note: The 13 622 180 Hansgrohe Basic set is not approved in its own right.
  • Size: ½” BSP (F) (to 13 622 180 Hansgrohe Basic set).
  • Marking: AXOR (brand of Hansgrohe SE) on spout.
  • Installation Requirements R001 R010 R040
  • Model
    Concealed body: 13 622 180 Hansgrohe Basic set. Which must be installed with one of the following trim sets: 36 106 xxx AXOR Citterio E. 36 114 xxx AXOR Citterio E. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110036

Floor mounted, single hole, single outlet (fixed) combination tap assembly with brass body (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet (activated by pulling the end of the spout surround). The shower outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is also supplied with shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2110036
  • Expiry date: 31/10/2026
  • Size: ½” BSP (F)
  • Marking: AXOR (brand of Hansgrohe SE) on body.
  • Installation Requirements R001 R010 R040
  • Model
    10 456 xxx AXOR Starck Single lever bath mixer floor-standing with pin handle. 10 455 xxx AXOR Starck Single lever bath mixer floor-standing with lever handle. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111705

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a lever operated pop-up waste or click type waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2111705
  • Expiry date: 30/11/2026
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: HANSGROHE on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    71 700 xxx Hansgrohe Talis E Single lever basin mixer 80 with pop-up waste set. 71 701 xxx Hansgrohe Talis E Single lever basin mixer 80 with push-open (click type) waste set. 71 702 xxx Hansgrohe Talis E Single lever basin mixer 80 without waste set. 71 703 xxx Hansgrohe Talis E Single lever basin mixer 80 CoolStart with pop-up waste set. 71 704 xxx Hansgrohe Talis E Single lever basin mixer 80 CoolStart without waste set. 71 705 xxx Hansgrohe Talis E Single lever basin mixer 80 LowFlow with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110090

Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2110090
  • Expiry date: 31/10/2026
  • Note: Open outlet use only
  • Size: ½” BSP (M).
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R040
  • Model
    28 561 XXX Hansgrohe Crometta hand shower mono green 6 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110094

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2110094
  • Expiry date: 31/10/2026
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR (brand of Hansgrohe SE) on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    39024XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set, 39023XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set, 39022XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39021XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39151XXX - AXOR Citterio - Single lever basin mixer 280 with lever handle for wash bowls with waste set - rhombic cut, 39081XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set - rhombic cut, 39071XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set - rhombic cut, 39001XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set - rhombic cut. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110309

Range of wall mounted and overhead shower outlets, incorporating stainless steel strainers and flow regulators at the inlets. Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2110309
  • Expiry date: 31/10/2026
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R040
  • Model
    26 226 xxx HG 250 1jet headshower 26 227 xxx HG 250 1jet heedshower 9l 26 230 xxx HG 360 1jet headshower 26 228 xxx HG 250 1jet headshower ceiling 26 229 xxx HG 250 1jet headshower 9l celing 26 231 xxx HG 360 1jet headshower ceiling 26 232 xxx HG 250 3jet headshower wall 26 233 xxx HG 250 3jet headshower 9l wall 26 234 xxx HG 360 3jet headshower wall
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110091

Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2110091
  • Expiry date: 31/10/2026
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: AXOR (brand of Hansgrohe SE) on body.
  • Installation Requirements R001 R040
  • Model
    26 025 xxx AXOR Showers/Front Hand shower 85 1jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110027

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some products are supplied with a pop-up waste or a click type waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2110027
  • Expiry date: 31/10/2026
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Talis S Single lever basin mixer 80 range: 72 010 xxx with pop-up waste set, 72 011 xxx with push-open (click type) waste set, 72 012 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 CoolStart range: 72 013 xxx with pop-up waste set, 72 014 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 LowFlow range: 72 015 xxx with pop-up waste set, 72 018 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 range: 72 020 xxx with pop-up waste set, 72 021 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 CoolStart range: 72 022 xxx with pop up waste set, 72 023 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 LowFlow 72 024 xxx with pop up waste set, 72 025 xxx without pop-up waste. Hansgrohe Talis S Single lever basin mixer 190 range: 72 031 xxx with pop-up waste, 72 032 xxx without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201702

Shower kit consisting of a wall mounted elbow (brass body various finishes - see model), shower hose and handset. The outlet of the wall elbow incorporates a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset inlet incorporates a stainless-steel strainer and a plastic flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2201702
  • Expiry date: 31/01/2027
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: AXOR (brand of Hansgrohe SE) on body.
  • Installation Requirements R001 R040
  • Model
    12 626 xxx AXOR Starck Porter unit 120/120 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110072

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 100 xxx model is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2110072
  • Expiry date: 31/10/2026
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections
  • Marking: AXOR (brand of Hansgrohe SE) on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    36 100 xxx AXOR Citterio E Single lever basin mixer 130 with pop-up waste set. 36 101 xxx AXOR Citterio E Single lever basin mixer 130 with waste set. 36 102 xxx AXOR Citterio E Single lever basin mixer 90 for hand washbasins with waste set. 36 103 xxx AXOR Citterio E Single lever basin mixer 190 for wash bowls with waste set. 36 104 xxx AXOR Citterio E Single lever basin mixer 250 for wash bowls with waste set. 36 105 xxx AXOR Citterio E Pillar tap 90 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111034

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet has a plastic aerator and model 31 531 XXX is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2111034
  • Expiry date: 30/11/2026
  • Size: Stainless steel braided, PEX lined hoses assemblies incorporating 3/8" captive nut end connection.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Focus Single lever basin mixer 230 31 531 xxx 31 532 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111039

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated) incorporating a joystick controlled ceramic cartridge headwork. The spout outlets incorporate a plastic aerator. Models 39 031 xxx & 39 035 xxx are supplied with lever operated pop-up wastes and model 39 032 xx is supplied with a pop-up waste kit. Maximum working pressure: 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2111039
  • Expiry date: 30/11/2026
  • Note: No testing has been performed on the pop-up waste
  • Size: Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" captive nuts end connections.
  • Marking: Axor on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    39 031 xxx Axor Citterio Single lever basin mixer 160 39 032 xxx Axor Citterio Single lever basin mixer 160 39 035 xxx Axor Citterio Single lever basin mixer 90 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111049

Range of shower handsets plastic bodies (various finishes) and EPDM ‘O’-rings. All models include a button on the shower face which alters the spray pattern. The product incorporates either a plastic strainer (26 050 & 26 530) or a stainless-steel strainer and a plastic flow regulator (26 051 & 26 531) on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2111049
  • Expiry date: 30/11/2026
  • Note: Open outlet use only.
  • Size: ½” BSP male
  • Marking: 26 050 xxx- AXOR on body (26 050 xxx only) Hansgrohe on handle (all other models)
  • Installation Requirements R001 R040
  • Model
    26 530 xxx 26 530 400 26 531 xxx 26 531 400 26 050 xxx 26 051 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110026

A range of wall mounted two hole single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor on the underside of the tap. The inlets of the function block incorporate stainless steel strainers, plastic silencers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0684 Combination Tap Assemblies
  • Section Subtitle: Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
  • WRAS Approval Number: 2110026
  • Expiry date: 31/10/2026
  • Note: The 16 180 180 Axor Basic set is not approved in its own right.
  • Size: ¾” BSP (F) to basic set
  • Marking: AXOR (brand of Hansgrohe SE) on face plate.
  • Installation Requirements R001 R010 R040 R570
  • Model
    Concealed Valve: 16 180 180 Axor Basic set. Which must be installed with one of the following trim sets: 39 117 xxx Axor Citterio with spout 160 mm. 39 118 xxx Axor Citterio with spout 220 mm. 38 119 xxx Axor Uno with spout 165 mm. 38 120 xxx Axor Uno with spout 225 mm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112036

Range of single hole, metal, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate plastic aerators. The 31 609 xxx model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2112036
  • Expiry date: 31/12/2026
  • Size: Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with 3/8" captive nuts
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 519 xxx Hansgrohe Focus Single lever basin mixer 240 with swivel spout without waste set 31 609 xxx Hansgrohe Focus Single lever basin mixer 240 with swivel spout and pop-up waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112041

Wall mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. To be used with rough set 13622180. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2112041
  • Expiry date: 31/12/2026
  • Size: Spout - 1/2" BSP male, Cartridge - internal metric thread for connecting to rough set 13622180 which has a ½” BSP (F) inlet
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    71256xxx Single lever basin mixer for concealed installation Fine wall-mounted with spout 20.5 cm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112042

A range of four-hole single outlet fixed combination tap assemblies with brass bodies in a variety of finishes (See models). Incorporating ¼ ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet elbow incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is supplied with a shower hose, shower handset and metal screw clamp type back nuts. The side valves and the spout are connected with a copper tube. Maximum working pressure 10 bar. Maximum working temperature 60 °C.

  • Section: 0680 Combination Tap Assemblies
  • Section Subtitle: Four hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2112042
  • Expiry date: 31/12/2026
  • Size: For use with basic set 13244180 which has ½” BSP (M) inlets
  • Marking: HANSGROHE on Spout
  • Installation Requirements R001 R006 R030
  • Model
    HG Vernis Blend 4 hole bath mixer chrome models: 71 456 xxx 71 459 xxx Has to be installed with basic set 13 244 180 (HG 4 hole bath mixer basic set) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112047

Range of overhead shower outlets with brass bodies in various finishes (See models) incorporating EPDM ‘O’-rings and seals. The inlet to the shower heads incorporate either a plastic steel sieve (26 031 xxx) or a stainless steel (26 032 xxx) has a stainless-steel sieve. The inlet for the shower head incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection (Model 26 031 xxx only). Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2112047
  • Expiry date: 31/12/2026
  • Note: Open outlet use only
  • Size: Specifically designed for use with basic set 26 909 180 which has 1/2" BSP female inlets
  • Marking: AXOR on shower plate
  • Installation Requirements R001 R040
  • Model
    26 031 xxx Axor LampShower/Nendo LampShower 275 1jet with shower arm 26 032 xxx Axor LampShower/Nendo LampShower 275 1jet with ceiling connector 26 909 180 Axor Showers/Front Basic set for LampShower 275 1jet with shower arm and overhead shower 240 2jet with shower arm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2112056

Wall mounted single-hole, single outlet, fixed, combination tap assembly with a brass body in a variety of finishes (See models). Incorporating a ceramic disc headwork with a dome type operating member. The temperature is controlled separately via a rotary ceramic cartridge headwork that can also be used as a shut off with a dome type operating member. The inlets to the tap incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator and plastic flow regulator. Maximum working pressure 10 bar. Maximum working temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2112056
  • Expiry date: 31/12/2026
  • Size: For use with basic set 10 902 180 which has ½” BSP female inlets
  • Marking: AXOR on wall plate
  • Installation Requirements R001 R010 R040
  • Model
    12 015 xxx 10 902 180 (Basic set) Where “xxx” denotes the finish. -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106044

Axor range of overhead showers with brass and plastic bodies (various finishes - see model). The inlet incorporates a stainless-steel strainer and a plastic strainer. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2106044
  • Expiry date: 30/06/2026
  • Note: Open outlet use only.
  • Size: 35296000 model: 12mm spigot. 35286000 and 35297000 models: 15mm plastic pipe. All other models: ½” BSP (M).
  • Marking: Axor on showerhead face
  • Installation Requirements R001 R040
  • Model
    35284XXX - Axor Overhead shower 250 1jet with shower arm. 35286XXX - Axor Overhead shower 250 1jet with ceiling connection. 35287XXX - Axor Overhead shower 250 1jet ceiling. 35296XXX - Axor Overhead shower 250 2 jet with shower arm. 35297XXX - Axor Overhead shower 250 2 jet with ceiling connection. 35298XXX - Axor Overhead shower 250 2jet ceiling connection. 35300XXX - Axor Overhead shower 300 1jet with shower arm. 35301XXX - Axor Overhead shower 300 1jet with ceiling connection. 35302XXX - Axor Overhead shower 300 1jet ceiling. 35303XXX - Axor Overhead shower 300 with shower arm. 35304XXX - Axor Overhead shower 300 2jet with ceiling connection. 35305XXX - Axor Overhead shower 300 2jet ceiling. 35306XXX - Axor Overhead shower 250/250 1 jet with shower arm. 35308XXX - Axor overhead shower 250/250 1jet ceiling connection. 35309XXX - Axor Overhead shower 250/250 1jet ceiling. 35310XXX - Axor overhead shower 250/250 2jet with shower arm. 35312XXX - Axor overhead shower 250/250 2jet with ceiling connection. 35313XXX - Axor Overhead shower 250/250 2jet ceiling. 35314XXX - Axor Overhead shower 300/300 1jet with shower arm. 35316XXX - Axor Overhead shower 300/300 1jet with ceiling connection. 35317XXX - Axor Overhead shower 300/300 1jet with ceiling connection. 35318XXX - Axor Overhead shower 300/300 2jet with shower arm. 35320XXX - Axor Overhead shower 300/300 2jet ceiling connection. 35321XXX - Axor Overhead shower 300/300 2jet ceiling. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2110038

Range of showers handsets with plastic bodies (various finishes), all models incorporate a strainer, some models incorporate a flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2110038
  • Expiry date: 31/10/2026
  • Note: Open outlet use only.
  • Size: ½” BSP (M).
  • Marking: HANSGROHE on body.
  • Installation Requirements R001 R040
  • Model
    26 800 XXX Hansgrohe Croma Select S Hand shower Multi. 26 801 XXX Hansgrohe Croma Select S Hand shower Multi EcoSmart 9 l/min. 26 802 XXX Hansgrohe Croma Select S Hand shower Vario. 26 803 XXX Hansgrohe Croma Select S Hand shower Vario EcoSmart 9 l/min. 26 804 XXX Hansgrohe Croma Select S Hand shower 1jet. 26 805 XXX Hansgrohe Croma Select S Hand shower 1jet EcoSmart 9 l/min. 26 806 XXX Hansgrohe Croma Select S Hand shower 1jet EcoSmart 7 l/min. Where xxx denotes the surface finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201038

Single inlet, flow control valve with a brass body, incorporating a ‘detent’ (push to on push to off) headwork controlling the flow. The product is supplied with a trim sets in various finishes (see model) Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 2201038
  • Expiry date: 31/01/2027
  • Note: The 45 770 180 AXOR One Basic set is not approved in its own right.
  • Size: ½” BSP (F) inlet x ¾” BSP (F) outlet
  • Marking: AXOR on wall plate
  • Installation Requirements R001 R010 R040
  • Model
    45 771 xxx AXOR One Shut-off valve for use in conjunction with 45 770 180 AXOR One Basic set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201041

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with a pop-up or click type waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2201041
  • Expiry date: 31/01/2027
  • Note: No testing performed on pop-up waste
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    71 710 xxx Hansgrohe Talis E Single lever basin mixer 110 with pop-up waste set. 71 713 xxx Hansgrohe Talis E Single lever basin mixer 110 CoolStart with pop-up waste set. 71 715 xxx Hansgrohe Talis E Single lever basin mixer 110 LowFlow with pop-up waste set. 71 716 xxx Hansgrohe Talis E Single lever basin mixer 240 with pop-up waste set. 71 711 xxx Hansgrohe Talis E Single lever basin mixer 110 with push-open waste set. 71 712 xxx Hansgrohe Talis E Single lever basin mixer 110 without waste set. 71 714 xxx Hansgrohe Talis E Single lever basin mixer 110 CoolStart without waste set. 71 717 xxx Hansgrohe Talis E Single lever basin mixer 240 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205704

Single hole, single outlet (swivel) combination tap assembly (brass body, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2205704
  • Expiry date: 31/05/2027
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections.
  • Marking: Hansgrohe on base of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    72 810 XXX Hansgrohe Talis M51 Single lever kitchen mixer 260, 1 jet. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201310

Manual click type cartridge headwork with plastic body. EPDM seals and plastic strainer for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

  • Section: 0440 Headworks
  • WRAS Approval Number: 2201310
  • Expiry date: 31/01/2027
  • Size: 18.98mm Ø
  • Marking: Hansgrohe, date of manufacture (WW/YY) AuK Muller ID code & QR code on body.
  • Installation Requirements R001
  • Model
    50.005.800 (30148500)
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: A.u.K. Müller GmbH & Co. KG
    Company Name
    A.u.K. Müller GmbH & Co. KG
    Address
    Dresdener Str. 162, D-40595 Düsseldorf,
    Phone
    +49 211 7391 0
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2201035

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with a pop-up waste (see models). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2201035
  • Expiry date: 31/01/2027
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    14 042 xxx Hansgrohe Ecos Single lever basin mixer M CoolStart without waste set 31 539 xxx Hansgrohe Focus Single lever basin mixer 70 CoolStart with pop-up waste set 14 080 xxx Hansgrohe Ecos Single lever basin mixer M with pop-up waste set 31 910 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle and pop-up waste set 31 914 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle without waste set 31 604 xxx Hansgrohe Focus Single lever basin mixer 70 with push-open waste set 31 730 xxx Hansgrohe Focus Single lever basin mixer 70 with pop-up waste set 31 732 xxx Hansgrohe Focus Single lever basin mixer 70 with chain 31 733 xxx Hansgrohe Focus Single lever basin mixer 70 without waste set 31 951 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow with pop-up waste set 31 952 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow without waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Kreuzwegstrasse 41 D-77656 Offenburg
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203010

Range of single hole, single outlet, fixed, electronically controlled tap assemblies with brass bodies (various finishes), incorporating an electronic cartridge controlling the flow which is activated via an infrared sensor (either battery or mains powered). Models 31 171 xxx & 31 173 xxx incorporates a manually operated temperature control. The inlet adapters incorporate stainless steel filters and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2 ). The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

  • Section: 0684 Combination Tap Assemblies
  • Section Subtitle: Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
  • WRAS Approval Number: 2203010
  • Expiry date: 31/03/2027
  • Size: Stainless steel braided, PEX lined flexible hose assemblies with 3/8” BSP captive nuts with a check valve adapter which has a 3/8” BSP (F) inlet.
  • Marking: Hansgrohe on front of body.
  • Installation Requirements R001 R006 R009 R010 R577
  • Model
    Hansgrohe Focus Electronic basin mixer with temperature control: 31 171 xxx - battery-operated 31 173 xxx - 230 V mains connection Hansgrohe Focus Electronic basin mixer with temperature pre-adjustment: 31 172 xxx - battery-operated 31 174 xxx - 230 V mains connection Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203012

A range of wall mounted thermostatic blending valves with brass bodies (various finishes). The temperature is controlled via a thermostatic cartridge and dome operating member and flow is controlled via a quarter turn ceramic headwork. Product can come with one, two or three push type cartridges that divert the flow to various outlets (see model) The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2203012
  • Expiry date: 31/03/2027
  • Note: 45 710 180 – Basic set not approved in its own right.
  • Size: 1/2" BSP (F) inlet and outlet (45 710 180 Basic set)
  • Marking: AXOR on operating member
  • Installation Requirements R001 R010 R040
  • Model
    AXOR One thermostatic module 45 711 xxx – 1 function 45 712 xxx – 2 functions 45 713 xxx – 3 functions 45 710 180 – Basic set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203019

Manual diverter valve controlling the flow to a hand shower or overhead shower, housed within a brass body (various finishes). Incorporating a stainless-steel strainer and approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 70°C.

  • Section: 2050 Valves
  • Section Subtitle: Diverter.
  • WRAS Approval Number: 2203019
  • Expiry date: 31/03/2027
  • Note: Open outlet use only.
  • Size: ½” BSP Conical nut on shower hose.
  • Marking: Hansgrohe on handset, shower rose and holder.
  • Installation Requirements R001 R040
  • Model
    26 793 XXX Hansgrohe Croma Select S 280 Shower pipe Reno
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Kreuzwegstrasse 41 D-77656 Offenburg
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203020

Shower head with a brass body (various finishes), incorporating EPDM O- rings and a stainless-steel strainer at the inlet. Maximum operating temperature 60.0°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2203020
  • Expiry date: 31/03/2027
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on side of shower head
  • Installation Requirements R001 R040
  • Model
    26 734 xxx Hansgrohe Croma Overhead shower 220 1jet Low Pressure Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Inc
    Company Name
    Hansgrohe Inc
    Address
    1490 Bluegrass Lakes Pkwy Alpharetta GA 30004
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203046

Single hole, single outlet (fixed, with swivel nozzle) bidet combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 2203046
  • Expiry date: 31/03/2027
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided, PEX lined flexible hoses with 3/8" captive nut end connections.
  • Marking: AXOR on body - 39 201 XXX Rhombic cut AXOR on operating member - AXOR Citterio 39 214 XXX
  • Installation Requirements R001 R006 R009 R010
  • Model
    AXOR Citterio 39 214 XXX & 39 201 XXX Rhombic cut Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2203359

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 2203359
  • Expiry date: 31/03/2027
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Axor (brand name of Hansgrohe SE) on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    48 210 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204332

Range of push to open, push to close headworks with plastic bodies and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 2204332
  • Expiry date: 30/04/2027
  • Size: 26.93mm Ø
  • Marking: Hansgrohe on body
  • Installation Requirements R001
  • Model
    30741300 30184700
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207703

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator and models 31 088 000 & 31 183 000 are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2207703
  • Expiry date: 31/07/2027
  • Note: No testing performed on pop-up waste
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 088 XXX 31 183 XXX 31 186 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206702

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes). Incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator and Model 16 515 xxx is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2206702
  • Expiry date: 30/06/2027
  • Note: No testing has been performed on the pop-up waste.
  • Size: Stainless steel braided, PEX lined flexible hoses assemblies incorporating 3/8" captive nut end connections.
  • Marking: AXOR on front of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    AXOR Montreux range: 16 515 XXX 16 516 XXX Where XXX denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207704

Single hole, single outlet (swivel) combination tap assembly brass body (various finishes, see models) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2207704
  • Expiry date: 31/07/2027
  • Size: Stainless steel, braided, PE-X lined flexible hose assemblies with 3/8” BSP captive nuts
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    71 835 xxx Hansgrohe Logis M31 Single lever kitchen mixer 260 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204066

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. The 32 082 xxx model is supplied with a click type waste, the 32 084 xxx & 71 130 xxx models have a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2204066
  • Expiry date: 30/04/2027
  • Note: No testing performed on the pop-up waste
  • Size: Stainless steel braided PEX lined flexible hose assembly incorporating 3/8” BSP captive nut
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 082 XXX Hansgrohe Talis. 71 130 XXX Hansgrohe Logis. 71 131 XXX Hansgrohe Logis. Where XXX denotes the finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = Chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204079

Deck mounted two-hole, single outlet, fixed combination tap assembly (brass body, various finishes - see model), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2204079
  • Expiry date: 30/04/2027
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe on front base of tap.
  • Installation Requirements R001 R005 R010
  • Model
    71442 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205005

Range of wall mounted exposed thermostatic mixing valves with brass bodies (various finishes). Incorporating a ceramic disc headwork with single lever operating member controlling the flow of the outlet on the bottom of the valve and three push button cartridges, two control the flow to outlets at the rear of the valve, and one to the outlet on the bottom of the valve all with cube type operating members. The temperature is controlled independently via thermostatic cartridge with a dome type operating member with a manual override button. The inlets and outlet at the bottom of the valve incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum working temperature 65°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2205005
  • Expiry date: 31/05/2027
  • Size: ½” BSP (M)
  • Marking: AXOR on top face of housing
  • Installation Requirements R001 R010 R040
  • Model
    46 140 xxx 46 141 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205006

Range of wall mounted exposed thermostatic mixing valves with brass bodies (various finishes). Incorporating a ceramic disc headwork with a single lever operating member controlling the flow to a hose outlet and then two push button cartridges, one controls the flow to an outlet at the rear of the valve and the other to the outlet on the bottom of the valve with cube type operating members. The temperature is controlled independently via thermostatic cartridge with a dome type operating member with a manual override button. The inlets and outlet at the bottom of the valve incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum working temperature 65°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2205006
  • Expiry date: 31/05/2027
  • Size: ½” BSP (M)
  • Marking: AXOR on top of valve housing
  • Installation Requirements R001 R010 R040
  • Model
    46 240 xxx 46 241 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205007

Wall mounted, exposed thermostatic shower valve (brass body, various finishes) incorporating a non-rising spindle headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member which incorporates a manual override button. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2205007
  • Expiry date: 31/05/2027
  • Size: ¾” x ½” BSP offset union
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R010 R040
  • Model
    13 356 xxx Hansgrohe Ecomax ‘xxx’ denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205008

Range of wall mounted, bar type thermostatic shower mixers (various finishes). Incorporating a quarter turn ceramic disc headwork controlling the flow to the outlet with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with a manual override button. Both inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2205008
  • Expiry date: 31/05/2027
  • Size: 1/2" BSP (M) offset to 3/4" BSP (M)
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R010 R040
  • Model
    13 122 xxx Hansgrohe Ecostat Shower thermostat universal for exposed installation 13 156 xxx Hansgrohe MyFox Shower thermostat for exposed installation 34 635 xxx AXOR Citterio M Shower thermostat for exposed installation 36 160 xxx AXOR Citterio E Shower thermostat for exposed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205010

Range of shower outlets with plastic bodies (various finishes) incorporating a stainless-steel strainer and a flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2205010
  • Expiry date: 31/05/2027
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on shower face
  • Installation Requirements R001 R040
  • Model
    26 093 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet Green 26 094 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet Green 26 095 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet LowPressure 26 096 xxx Hansgrohe Vernis Shape Overhead shower 200 1jet LowPressure 26 271 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet 26 277 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet EcoSmart 26 281 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet 26 283 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet EcoSmart Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205011

Range of chrome plated plastic bodied shower heads. Maximum operating temperature 60 °C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2205011
  • Expiry date: 31/05/2027
  • Note: Open outlet use only.
  • Size: ½” BSP(M)
  • Marking: Hansgrohe on side on shower head
  • Installation Requirements R001 R040
  • Model
    26 522 xxx Hansgrohe Croma Select S Overhead shower 26 523 xxx Hansgrohe Croma Select S Overhead shower 26 524 xxx Hansgrohe Croma Select E Overhead shower 26 528 xxx Hansgrohe Croma Select E Overhead shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205016

Range of wall or ceiling mounted shower outlets with chromium plated plastic bodies and EPDM O-rings. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2205016
  • Expiry date: 31/05/2027
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: AXOR on rosette
  • Installation Requirements R001 R010
  • Model
    26 021 xxx AXOR Showers/Front Overhead shower 240 2jet with shower arm 26 022 xxx AXOR Showers/Front Overhead shower 240 2jet with ceiling connector Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205035

Range of wall mounted, concealed, manual blending bath shower mixers (brass bodies, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter (to divert the flow between a shower outlet or bath spout outlet - not supplied). The products comprise of a basic set, (concealed body), which includes the ceramic cartridge and a finish set that includes the self-cancelling diverter, headwork collar, operating member and trim set. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2205035
  • Expiry date: 31/05/2027
  • Note: This approval does not include a shower hose and handset, or a bath spout. The 31 741 180 Hansgrohe Basic set is not approved in its own right.
  • Size: Inlet: ½” BSP (F) to basic set. Shower Outlet: ½” BSP (F). Bath Outlet: ¾” BSP (F).
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R030
  • Model
    31 741 180 Hansgrohe Basic set for single lever bath mixer for concealed installation which must be installed in conjunction with the following finish sets: 31 484 xxx Hansgrohe Metris Single lever bath mixer, 31 947 xxx Hansgrohe Focus Single lever bath mixer, 71 406 xxx Hansgrohe Logis Single lever bath mixer, 71 746 xxx Hansgrohe Talis E Single lever bath mixer, 72 407 xxx Hansgrohe Talis S Single lever bath mixer. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207705

Deck mounted, three hole, single outlet (fixed) combination tap assembly (brass body, various finish - see models) incorporating quarter turn ceramic disc headworks with single lever operating members. The product is supplied with a stainless steel braided thermoplastic silicone rubber lined flexible hose assemblies for installation between the headworks and the spout, a pop-up waste and metal backnuts. The spout outlet incorporates a combined plastic flow regulator and plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2207705
  • Expiry date: 31/07/2027
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Hansgrohe on front of spout.
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    71 733 xxx Hansgrohe Talis E Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207706

Wall mounted spout outlet (brass body, various finishes - see model) incorporating a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 2207706
  • Expiry date: 31/07/2027
  • Size: ¾” BSP (M).
  • Marking: AXOR (brand of Hansgrohe) on top of spout.
  • Installation Requirements R001 R040
  • Model
    10 410 xxx AXOR Starck Bath spout. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205040

A range of wall mounted two-hole single outlet fixed combination tap assemblies with brass bodies and various finishes (see models). Incorporating a combined shut-off and manual diverter cartridge which diverts between the bath or shower outlet with various operating members (see models). The temperature is controlled independently via a thermostatic cartridge with a manual override button with dome type or single lever type operating members (See models). Both inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar, Maximum working temperature 60°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2205040
  • Expiry date: 31/05/2027
  • Note: Not supplied with shower hose or handset.
  • Size: ¾” BSP male x ½” BSP male offset unions.
  • Marking: 34 435 xxx, 36 140 xxx- AXOR on top of tap 13 123 xxx, 13 154 xxx and 15 348 xx- Hansgrohe on top of tap
  • Installation Requirements R001 R020 R040
  • Model
    13 123 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with dome type operating members. 13 154 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with single lever operating members. 34 435 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with dome type operating members. 36 140 xxx- Shut-off/diverter cartridge has a cross top operating member thermostatic cartridge has a dome type operating member. 15 348 xxx- Shut-off/diverter cartridge and thermostatic cartridge both with single lever operating members. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205047

Range of shower handsets with plastic bodies (various finishes) incorporating stainless steel strainers on the inlets and flow regulators (on models 26 827 XXX and 26 829 XXX). Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2205047
  • Expiry date: 31/05/2027
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe and product info on shower handle
  • Installation Requirements R001 R040
  • Model
    26 823 xxx Hansgrohe Crometta 100 Hand shower Multi 26 824 xxx Hansgrohe Crometta 100 Hand shower Vario 26 825 xxx Hansgrohe Crometta 100 Hand shower 1jet 26 826 xxx Hansgrohe Crometta 100 Hand shower Multi EcoSmart 9 l/min 26 827 xxx Hansgrohe Crometta 100 Hand shower Vario EcoSmart 9 l/min 26 828 xxx Hansgrohe Crometta 100 Hand shower 1jet EcoSmart 9 l/min 26 829 xxx Hansgrohe Crometta 100 Hand shower 1jet EcoSmart 7 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205048

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a push on/off headwork with rotary temperature control using dome type lever operating member. Both inlets incorporate stainless steel strainers an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Some models are supplied with lever type pop up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2205048
  • Expiry date: 31/05/2027
  • Note: No testing performed on pop up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections
  • Marking: Hansgrohe on front of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Models with a waste set: 71 750 xxx Hansgrohe Talis Select E Basin mixer 110 71 752 xxx Hansgrohe Talis Select E Basin mixer 240 72 040 xxx Hansgrohe Talis Select S Basin mixer 80 72 042 xxx Hansgrohe Talis Select S Basin mixer 100 72 044 xxx Hansgrohe Talis Select S Basin mixer 190 Models without a waste set: 72 041 xxx Hansgrohe Talis Select S Basin mixer 80 72 043 xxx Hansgrohe Talis Select S Basin mixer 100 72 045 xxx Hansgrohe Talis Select S Basin mixer 190 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205049

Wall mounted, manual blending valve (brass body, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2205049
  • Expiry date: 31/05/2027
  • Note: This approval does not include a shower hose and handset.
  • Size: ½" x ¾" offset unions.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    31 680 xxx Hansgrohe Metris Single lever shower mixer for exposed installation. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205050

Wall mounted two-hole, single outlet (fixed) combination tap assemblies, brass bodies with various finishes (see model) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2205050
  • Expiry date: 31/05/2027
  • Size: ½”- ¾” BSP (M) Offset Union
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R030
  • Model
    31 940 xxx Hansgrohe Focus Single lever bath mixer for exposed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205051

Range of floor mounted, single outlet (fixed) combination tap assembly with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet with a single lever operating member. The shower outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator and the product is supplied with a shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2205051
  • Expiry date: 31/05/2027
  • Size: ½” BSP (F)
  • Marking: AXOR on body.
  • Installation Requirements R001 R010 R030
  • Model
    AXOR Edge Single lever bath mixer floor-standing models 46 440 xxx 46 441 xxx - diamond cut Where xxx denotes the surface finish. 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205052

Wall mounted, single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2205052
  • Expiry date: 31/05/2027
  • Note: Basic set 10902180 is not part of this approval
  • Size: For use with basic set 10902180 which has ½" BSP (F) inlets
  • Marking: AXOR on body
  • Installation Requirements R001 R010 R040
  • Model
    11 026 xxx AXOR Urquiola Single lever basin mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205053

Wall mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork, single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2205053
  • Expiry date: 31/05/2027
  • Size: ¾” x ½” BSP (M) offset union
  • Marking: AXOR on body
  • Installation Requirements R001 R010 R030
  • Model
    34 420 xxx AXOR Citterio M Single lever bath mixer for exposed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205073

Range of shower heads with plastic bodies (various finishes), incorporating EPDM o rings and stainless-steel strainers on the inlets. Model 24132xxx incorporates a flow restrictor on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2205073
  • Expiry date: 31/05/2027
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on shower face
  • Installation Requirements R001 R040
  • Model
    24130xxx Hansgrohe Pulsify S Overhead shower 105 1jet 24132xxx Hansgrohe Pulsify S Overhead shower 105 1jet Green Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205074

Range of shower heads with or without wall connectors (see models) with plastic bodies (various finishes). Incorporating stainless steel strainers and flow regulators in the inlets. Maximum operating temperature 60°C. Maximum working pressure Open outlet use

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2205074
  • Expiry date: 31/05/2027
  • Note: The I Box (01800180) is approved but is not a part of this approval
  • Size: ½” BSP (F) - 24140xxx Specifically, for use with I box 01800180 which has 3/4" BSP (F) inlets - 24150xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
  • Marking: Hansgrohe on shower face
  • Installation Requirements R001 R040
  • Model
    24140xxx Hansgrohe Pulsify S overhead shower 260 1jet 24150xxx Hansgrohe Pulsify S overhead shower 260 2jet with wall connector
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205075

Range of overhead shower outlets with brass and plastic bodies, various finishes (see models). The inlets incorporate stainless-steel filters and plastic flow regulators. Maximum operating temperature 60°C. Open outlet use only.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2205075
  • Expiry date: 31/05/2027
  • Size: ½” BSP male
  • Marking: Hansgrohe of rim of shower head
  • Installation Requirements R001 R040
  • Model
    27 461 XXX 27 463 XXX 27 464 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204080

Deck mounted two-hole, single outlet, fixed combination tap assembly (brass body, various finishes - see model), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts and an optional stainless steel mesh washer for installation in the spout outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2204080
  • Expiry date: 30/04/2027
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe on front base of tap.
  • Installation Requirements R001 R006 R010
  • Model
    71452 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204082

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies. The product comprises of a trim set (various finishes - see model) and a concealed brass body. The trim set includes a ceramic cartridge headwork with a single lever operating member, headwork collar and a brass spout for installation into the concealed body. The spout outlet incorporates a plastic aerator, as well as a plastic strainer and plastic flow regulator on its inlet. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2204082
  • Expiry date: 30/04/2027
  • Note: The 13622180 basic set (concealed body) is not approved in its own right.
  • Size: ½” BSP (M) inlets (to basic set - concealed body).
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    71 576 xxx HG Vernis Blend 2-hole basin mixer, 71 578 xxx HG Vernis Shape 2-hole basin mixer. Both of which must be installed in conjunction with: 13622180 (Basic set - concealed body). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2204081

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The outlet from the self-cancelling diverter incorporates an approved check valve cartridge, Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2204081
  • Expiry date: 30/04/2027
  • Note: This approval does not include a shower hose and handset.
  • Size: Stainless steel braided thermoplastic silicone (TPSiV) lined flexible hose assemblies with ⅜" captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    71 444 xxx single lever bath and shower mixer Monotrou, 71 463 xxx single lever bath and shower mixer Monotrou. Where xx denotes the surface finish (which is non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2205072

Wall mounted spout outlet (brass body, various finishes - see model) incorporating a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 2205072
  • Expiry date: 31/05/2027
  • Size: ¾” BSP (M).
  • Marking: Hansgrohe on wall plate.
  • Installation Requirements R001 R040
  • Model
    72 410 xxx Hansgrohe Talis S Bath spout. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207709

Range of overhead shower outlets with brass bodies (various finishes - see model). Model 27 390 xxx is ceiling mounted. Model 27 437 xxx is wall mounted. The inlet incorporates stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2207709
  • Expiry date: 31/07/2027
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: 27 390 xxx model: Hansgrohe on shower head body. 27 437 xxx model: Hansgrohe on rosette.
  • Installation Requirements R001 R040
  • Model
    27 390 xxx Hansgrohe PuraVida (Overhead shower 400 1jet with ceiling connector), 27 437 xxx Hansgrohe PuraVida (Overhead shower 400 1jet with shower arm). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206035

Range of wall mounted, concealed, manual blending shower valves with brass bodies and trim set (various finishes). The flow is controlled independently to one or two separate outlets via ‘detent’ (push to on push to off) headworks (see model). Temperature is controlled via a ceramic cartridge. The inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2206035
  • Expiry date: 30/06/2027
  • Note: This approval does not include a shower hose and handset.
  • Size: 15mm ØD flat faced connection.
  • Marking: Hansgrohe on face plate.
  • Installation Requirements R001 R010 R040
  • Model
    15 747 xxx Hansgrohe ShowerSelect S Mixer for concealed installation for 1 function, 15 748 xxx Hansgrohe ShowerSelect S Mixer for concealed installation for 2 functions, 15 767 xxx Hansgrohe ShowerSelect Mixer for concealed installation for 1 function, 15 768 xxx Hansgrohe ShowerSelect Mixer for concealed installation for 2 functions. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206355

Wall mounted manual blending shower valve with a brass body (various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2206355
  • Expiry date: 30/06/2027
  • Note: This approval does not include a shower hose and handset..
  • Size: ⅜” x ½” offset union.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    71602xxx HG Logis E shower mixer exposed. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206036

Range of wall mounted two-hole, single outlet (fixed), combination tap assemblies incorporating brass bodies (various finishes), ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2206036
  • Expiry date: 30/06/2027
  • Size: 1/2" x 3/4" BSP (M) offset union
  • Marking: HANSGROHE on Operating Member
  • Installation Requirements R001 R030
  • Model
    13 040 xxx Hansgrohe Picta Single lever bath mixer for exposed installation 14 403 xxx Hansgrohe Sanibel Single lever bath mixer for exposed installation 31 480 xxx Hansgrohe Metris Single lever bath mixer for exposed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2206038

Range of thermostatic cartridges with plastic bodies and EPDM ‘O’-rings. All models incorporate a plastic strainer. For insertion into specifically dimensioned bores. Maximum working pressure 16 bar. Maximum operating temperature 60°C.

  • Section: 0442 Thermostatic cartridges
  • WRAS Approval Number: 2206038
  • Expiry date: 30/06/2027
  • Size: Please refer to model.
  • Marking: Hansgrohe on body (3/4” BSP male models are marked underneath the nut on the body)
  • Installation Requirements R001
  • Model
    30 122 090 - OD 30mm 31 122 020 - ¾” BSP male 31 122 030 - ¾” BSP male 31 122 040 - OD 30mm 31 122 050 - ¾” BSP male 31 122 060 - ¾” BSP male 31 122 070 - ¾” BSP male 31 122 080 - ¾” BSP male
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2207710

Range of shower handsets (various finishes) incorporating stainless steel strainers. Model 28 588 xxx incorporates flow regulator. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2207710
  • Expiry date: 31/07/2027
  • Note: Open outlet use only.
  • Size: Stainless steel braided thermoplastic silicone rubber lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.
  • Marking: Hansgrohe on front base of shower handset.
  • Installation Requirements R001 R040
  • Model
    28 587 xxx- Hansgrohe Raindance Select S Hand shower 150 3jet 28 588 xxx- Hansgrohe Raindance Select S Hand shower 150 3jet EcoSmart 9 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1