Combination Tap Assemblies

Section Code 0465 : Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: 1606024

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headwork, single lever operating member and a self-cancelling diverter. The spout outlet incorporates a plastic aerator. Supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1606024
  • Expiry date: 30/06/2021
  • Size: ½” female BSP inlets.
  • Marking: ‘Vado’ located on tap body and shower handset.
  • Installation Requirements R001 R010
  • Model
    NOT-133+K-C/P
  • Factor: Vado
    Company Name
    Vado
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611021

Floor mounted single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The shower outlet incorporates a single check valve (suitable for backflow protection against fluid category 2). The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1611021
  • Expiry date: 30/11/2021
  • Size: ½” BSP (F)
  • Marking: Ideal standard on operating member
  • Installation Requirements R001 R010 R040
  • Model
    A6347AA Tonic II single lever Bath/shower rim mounted mixer
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611052

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. The outlet to the shower hose incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The shower handset incorporates a flow regulator on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1611052
  • Expiry date: 30/11/2021
  • Size: 15mm copper tails.
  • Marking: Ideal Standard logo on operating member.
  • Installation Requirements R001 R006 R030
  • Model
    B7890AA Ceraplan
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612350

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork (with a single lever operating member) and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator & the product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1612350
  • Expiry date: 31/12/2021
  • Size: ¾” BSP (F)
  • Marking: Lota on operating member
  • Installation Requirements R001 R010 R040
  • Model
    62287-5601
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702013

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet incorporates a single cartridge check valve (suitable for backflow prevention against fluid category 2). The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1702013
  • Expiry date: 28/02/2022
  • Note: Product is supplied with a hose and handset
  • Size: ½” BSP (F)
  • Marking: Grohe on operating member.
  • Installation Requirements R001 R006 R010
  • Model
    EUROCUBE JOY S-SIZE 23.672
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702029

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with joystick operating member and a self-cancelling diverter to shower outlet. The shower outlet incorporates a single cartridge check valve (suitable for backflow protection against Fluid Category 2). The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1702029
  • Expiry date: 28/02/2022
  • Size: ½” BSP (F)
  • Marking: Grohe on body
  • Installation Requirements R001 R010 R040
  • Model
    EUROCUBE JOY S-SIZE 23.667 (for installation with floor mount 45 984 001)
  • Factor: Grohe AG
    Company Name
    Grohe AG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707016

Single hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork, single lever operating member and a self- cancelling diverter to shower outlet. The shower outlet incorporates a single check valve( suitable for backflow protection against fluid category 2) The spout outlet incorporates a plastic aerator straightener & the product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1707016
  • Expiry date: 31/07/2022
  • Size: ½” BSP Female
  • Marking: Ideal standard on operating member
  • Installation Requirements R001 R006 R009 R030
  • Model
    A6347AA Tonic ll
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709047

Floor mounted, single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The product incorporates a waterfall spout and is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1709047
  • Expiry date: 30/09/2022
  • Size: ½” BSP (F).
  • Marking: PPI on rear of tap body. PPI on shower handset.
  • Installation Requirements R001 R040 R160
  • Model
    901625
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710011

Hansgrohe Logis Monotrou’ single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The assembly also incorporates a self-cancelling diverter to shower outlet. The connection to shower outlet incorporates a single check valve cartridge (suitable for backflow prevention against fluid category 2). The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710011
  • Expiry date: 31/10/2022
  • Note: Not supplied with a shower hose and handset.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R030
  • Model
    71 312 xxx - Hansgrohe Logis Monotrou Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712019

Deck mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the shower outlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712019
  • Expiry date: 31/12/2022
  • Size: 15mm copper tails
  • Marking: SOTTINI on operating member and shower head
  • Installation Requirements R001 R006 R030
  • Model
    B8426AA Sottini Rosita
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709127

Floor mounted, single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The product incorporates a waterfall spout and is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1709127
  • Expiry date: 30/09/2022
  • Size: ½” BSP (F).
  • Marking: TP ON REAR OF TAP BODY
  • Installation Requirements R001 R040 R160
  • Model
    295671
  • Factor: Travis Perkins Plc
    Company Name
    Travis Perkins Plc
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811320

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass) with a concealed unit (which is only approved as part of this approval) connected to the floor mounted section (which is only approved as part of this approval) which incorporates a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet and hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1811320
  • Expiry date: 30/11/2023
  • Note: The 46189 concealed body (built-in part) is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R010 R040
  • Model
    46189 (built in part) for use with 53128 (external part)
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807337

Range of floor mounted, single hole, single outlet (fixed) combination tap assembly (brass bodies - on various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The shower outlet connection and the shower handset inlet both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure 10 bar. Maximum working temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1807337
  • Expiry date: 31/07/2023
  • Size: ½” BSP (M)
  • Marking: Graff logo on floor plate
  • Installation Requirements R001 R030
  • Model
    ME - 2363000-xx ‘xx’ at the end of model denotes finish, and can be replaced with: PC - polished chrome, SN - Steelnox® Satin Nickel, BNi - Brushed Nickel, PN - Polished Nickel, OB - Olive Bronze, BK - Black, WT - White, UB - Un-Finished Brass or BAu, - Brushed Gold Finish.
  • Factor: Graff Faucets Co.
    Company Name
    Graff Faucets Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812361

Range of floor-standing single hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with shower hose and handset. The shower handset on the following model styles: G1T, G1U, G7A, G7B, G7C, G7D, G4P, G5A, G5B, G5C, G5D, G64, G78, G7E, G8A, G8B, U9A, U9B, U9C, U9D, U9E, U9F, U9G, U9H, U9K, U9L, U9M, U9N, U9R, U9S, U9T, U9U, G6A, G6B, G6C, G6D, G6E, G6F, G1V, G1W, A35, A33 & A34 incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet of the shower handest on the following model styles: G4K, U2A & U2B incorporates a plastic flow restrictor. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1812361
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: THG on rear of tap
  • Installation Requirements R001 R010 R040
  • Model
    6508S/W Styles: A33 -Bambou cristal noir ; A34 -Bambou cristal Ambre ; A35 -Bambou cristal clair ; G1T -Beluga ; G1U -Beluga à manettes ; G1V -Shao ; G1W -Shao à manettes ; G4K -Kuta ; G4P -Collection "O" ; G5A -Nano ; G5B -Nano à manettes ; G5C -Anoa corne claire ; G5D -Anoa corne noire ; G64 -Primo ; G6A -Métamorphose ; G6B -Métamorphose à manettes ; G6C -Métamorphose carbone ; G6D -Métamorphose céramique noire ; G6E -Métamorphose céramique blanche ; G78 -Tendance ; G7A -Beaubourg ; G7B Beaubourg à manettes ; G7C -Saint Germain ; G7D -Saint Germain à manettes ; G7E -Dean ; G8A - Les Ondes ; G8B - Les Ondes à manettes ;U2A -Le 11 by Alberto Pinto ; U2B -Le 11 by Alberto Pinto à manettes ; U9A -West Coast croisillon métal ; U9B -West Coast manette métal ; U9C -West Coast croisillon guilloché lin ; U9D -West Coast manette guillochée lin ; U9E -West Coast croisillon onyx noir ; U9F -West Coast manette onyx noir ; U9G -West Coast croisillon marbre blanc ; U9H -West Coast manette marbre blanc ; U9K -Grand Central croisillon métal ; U9L -Grand Central manette métal ; U9M -Grand Central croisillon onyx noir ; U9N -Grand Central manette onyx noir ; U9R -Grand Central croisillon marbre blanc ; U9S -Grand Central manette marbre blanc ; U9T -Grand Central croisillon guillochage lin ; U9U -Grand Central manette guillochage lin ; Finishes: A02 – Polished Chrome, C02 – Matt Chrome, C03 – Satin Chrome, G02 – Polished Chrome/Polished Gold, F18 – Rhodium Silver, F19 – Matt Rhodium Silver, H03 – Varnished Antique Silver, H08 – Varnished Matt Antique Silver, B01 – Polished Nickel, C01 – Matt Nickel, G01 – Polished Nickel/Polished Gold, E02 – Matt Nickel/Polished Gold, D01 – Varnished Clear Bronze, D05 – Varnished Matt Bronze, H24 – Varnished Antique Red Copper, H07 – Matt Antique Red Copper, H44 – Polished Luxbrass, H16 – Matt Luxbrass, H12 – Satin Luxbrass, F01 – Polished Gold, F02 – Matt Gold, F27 - Rose Gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour – mât, F35 - PVD brown bronze colour – satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné ,F20 - PVD DORE A complete model number compiles of a three digit code from each section above, for example; G1U.A02. 6508S/W. This would give you a : Beluga à manettes style - polished chrome finish. FREE-STANDING BATH MIXER WITH HANDSHOWER WITH EASYCLEAN SYSTEM -
  • Manufacturer: THG
    Company Name
    THG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903017

Deck mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset, metal backnuts and an optional ⅜” BSP (M) x 15mm compression adaptor for installation on each inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1903017
  • Expiry date: 31/03/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.
  • Marking: Ideal Standard on operating member
  • Installation Requirements R001 R006 R030
  • Model
    BC191AA CERALINE 1 HOLE BATH SHOWER MIXER
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905001

Floor mounted single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1905001
  • Expiry date: 31/05/2024
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on front of Body
  • Installation Requirements R001 R010 R040
  • Model
    72 412 xxx HG Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905046

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset (which also incorporates a plastic flow restrictor). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1905046
  • Expiry date: 31/05/2024
  • Size: 15mm copper tails
  • Marking: Ideal standard on operating member and shower handset.
  • Installation Requirements R001 R006 R009 R030
  • Model
    B1957AA - Tesi 1H SL
  • Factor: Ideal Standard (UK) Ltd
    Company Name
    Ideal Standard (UK) Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907340

‘Hansgrohe Novus’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The product also incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet connections also incorporate an approved check valve cartridge however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1907340
  • Expiry date: 31/07/2024
  • Note: This approval does not include a shower hose and handset.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R030
  • Model
    Hansgrohe Novus range 71 321 xxx & 71 324 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912302

Floor mounted single hole, single outlet (fixed) combination tap assembly (in various finishes) Incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1912302
  • Expiry date: 31/12/2024
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” BSP (F)
  • Marking: Kohler Logo on operating member
  • Installation Requirements R001 R010 R040
  • Model
    97344W-ZZ-** Where ** denotes finishes available in: BZ - Antique Bronze, YG - Matte Gold, SA - Antique Silver, FNY - Navy Blue, 7 - Black, AD - Nickel Silver, 96 - Biscuit, R2B - Oil Rubbed Bronze-Gold, W7 - Black Nickel, 2BZ - Oil Rubbed Bronze, LB - Bronze, CP - Polished Chrome, G - Brushed Chrome, 1CP - Polished Chrome ABS, AG - Brushed Nickel, PGD - Polished Gold, BS - Brushed Stainless, 24K - Polished Gold, FGN - Chartreuse, S - Polished Stainless, FRD - Cherry Red, GN - Gunmetal, FBG - Retro Blue, BV - Vibrant Brushed Bronze, RGD - Rose Gold, BN - Vibrant Brushed Nickel, TB - Satin Black, AF - Vibrant French Gold, SSL - Sterling Silver, BGD - Vibrant Modern Brushed Gold, TT - Titanium, PB - Vibrant Polished Brass, ULB - Un-lacquered Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage, W6 - Weathered Bronze, AGP - PVD Brushed Nickel, 24P - PVD Polished Gold, ADP - PVD Silver Nickel.
  • Factor: Kohler Mira Ltd
    Company Name
    Kohler Mira Ltd
    View All Listings by this Company
  • Manufacturer: Kohler France
    Company Name
    Kohler France
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911355

Range of floor mounted (fixed) combination tap assemblies incorporating brass bodies (various finishes), ceramic cartridge headwork controlling the flow with dome type operating members and a self-cancelling diverter to shower hose and handset. The outlet of the diverter and the inlet of the shower handset both incorporate an approved single check valve however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1911355
  • Expiry date: 30/11/2024
  • Size: ½” BSP (F)
  • Marking: Graff on faceplate.
  • Installation Requirements R001 R010 R040
  • Model
    Finezza E-6857-LM47N-yy. Incanto E-11254-LM55N-yy. Sento E-6354-xxx-yy. ‘yy’ denotes finish and is replaced with: PC - Polished Chrome, SN - Steelnox® Satin Nickel, BNi - Brushed Nickel, PN - Polished Nickel, OB - Olive Bronze, BK - Black, WT - White, UB - Un-Finished Brass, BAU - Brushed 24K Gold, AU - 24K Gold, BB- Brushed Brass PVD, GM- Gunmetal, MBK- Matt Black, GMD- Gunmetal Distressed, OX - Onyx PVD, PB- Polished Brass PVD, RG - OR’osa PVD, UBB- Un-Finished brushed Brass, VBB - Vintage Brass Finish. ‘xxx’ denotes handle design and is replaced with: LM47N for Finezza model, LM55N for Incanto model, LM42N for Sento model, LM58N for Sento model, LM59N for Sento model.
  • Factor: Graff Faucets Co.
    Company Name
    Graff Faucets Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001027

Range of floor mounted single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet with a dome type operating member. The product incorporates an approved check valve cartridge on the outlet to the shower hose and on the inlet of the shower handset, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2001027
  • Expiry date: 31/01/2025
  • Size: ½” BSP (F)
  • Marking: Dornbracht on body
  • Installation Requirements R001 R010 R040
  • Model
    25863809, 25863661.
  • Manufacturer: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003006

Floor mounted single hole, single outlet (fixed) combination tap assembly incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet incorporates a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Product is supplied with a shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003006
  • Expiry date: 31/03/2025
  • Note: Rough kit, part number 3594597090 is not part of this approval.
  • Size: 38mm OD to fit into rough kit, part number 3594597090
  • Marking: Dornbracht on front of body.
  • Installation Requirements R001 R010 R040
  • Model
    25863710
  • Manufacturer: Aloys F. Dornbracht GmbH & Co. KG
    Company Name
    Aloys F. Dornbracht GmbH & Co. KG
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003008

Single hole, single outlet (fixed) combination tap assembly (various finished brass, see model), incorporating a ceramic cartridge headworks with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a rubber aerator. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003008
  • Expiry date: 31/03/2025
  • Note: This product is not supplied with a shower hose and handset
  • Size: Stainless steel braided PEX lined hose assemblies incorporating ⅜” BSP captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R030
  • Model
    31 930 XXX Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003043

Range of floor mounted single hole, single outlet (fixed) combination tap assemblies with various finishes. The models incorporate ceramic cartridge headworks, single lever operating members and a self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. Products are supplied with a shower hose and shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003043
  • Expiry date: 31/03/2025
  • Size: Stainless steel PET braided EPDM lined hose assemblies with ¾” captive nuts.
  • Marking: LOTA on rear of body
  • Installation Requirements R001 R030
  • Model
    62287-5701, 62287-586801, 62287-574408.
  • Manufacturer: Xiamen Lota International Co Ltd
    Company Name
    Xiamen Lota International Co Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003072

Range of floor mounted single hole, single outlet (fixed) combination tap assemblies with various finishes. The models incorporate ceramic cartridge headworks, single lever operating members and a self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. Products are supplied with a shower hose and shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003072
  • Expiry date: 31/03/2025
  • Size: Stainless steel PET braided EPDM lined hose assemblies with ¾” captive nuts.
  • Marking: Bathroom Brands logo on rear of body
  • Installation Requirements R001 R030
  • Model
    HOX.009CP, HOX.009MB & HOX.009BB COMBINATION TAP ASSEMBLIES
  • Factor: Bathroom Brands Group Limited.
    Company Name
    Bathroom Brands Group Limited.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007371

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet and hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007371
  • Expiry date: 31/07/2025
  • Note: 38389 concealed body (built-in part) is not approved in its own right.
  • Size: ½” BSP (F)
  • Marking: Gessi on operating member
  • Installation Requirements R001 R030
  • Model
    24970 to be installed in conjunction with 38389 (concealed unit)
  • Manufacturer: Gessi S.p.A.
    Company Name
    Gessi S.p.A.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010029

Floor mounted, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010029
  • Expiry date: 31/10/2025
  • Size: ½” BSP (F)
  • Marking: RAK CERAMICS On top of spout
  • Installation Requirements R001 R010 R030
  • Model
    RAKSOR3014C
  • Factor: RAK Ceramics UK Ltd
    Company Name
    RAK Ceramics UK Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010345

Range of single hole, single outlet (fixed) combination tap assembly with a brass body (various finishes), incorporating a ceramic cartridge headwork and single lever operating member with self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The diverter outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010345
  • Expiry date: 31/10/2025
  • Note: This approval does not include a hose and handset.
  • Size: ½” BSP (F)
  • Marking: Kohler on handset bracket
  • Installation Requirements R001 R030
  • Model
    C73087W-** KOHLER COMPOSED FREESTANDING BATH & SHOWER MIXER Where ** denotes finish and can be replaced with: BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, 2BZ - Oil Rubbed Bronze, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, MB - Modern Brass, BLR – Black & Red, BB – Brushed Bronze
  • Manufacturer: Kohler Mira Ltd
    Company Name
    Kohler Mira Ltd
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of