Section Code 2010 : Blending, thermostatic.
Back To Directory SectionsT-type thermostatic blending valve with a thermostatic cartridge controlling the temperature. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) with optional trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The inlets incorporate an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The hot and cold inlets within the valve body each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model YH3500-4 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating push type operated diverter to shower outlets (shower outlets not supplied). The inlets incorporate stainless steel strainers and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of wall mounted two-hole, thermostatic blending valves (chromium plated brass) incorporating a non-rising spindle headwork with single lever operating member. Both inlets incorporate a stainless-steel strainer and approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides adequate backflow protection. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating stainless steel strainers at the inlets. The flow is controlled by a non-rising headwork with single lever operating member and the temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Supplied with a shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating three, push type operated flow control headworks to optional shower outlets with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless-steel strainers and single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates stainless steel strainers on the inlets of the valve. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models (122323 and 122323V) incorporate a 3-way diverter. Model (122328) incorporate a 2-way diverter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product also incorporates a self-cancelling diverter. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C
Range of wall mounted, thermostatic blending valve shower set, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The overhead shower inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic (shower) blending valves with brass bodies (chromium plated or brushed nickel finishes). Flow is controlled by a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge with a cross top operating member and a separate manual override button. Both inlet elbows incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic blending valve shower sets, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset (neither supplied). Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar Maximum operating temperature 60°C
Wall mounted, concealed, thermostatic blending valves with brass body (various finishes). The temperature is controlled via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
T-type thermostatic mixing valve with a DZR brass body. Temperature is pre-set under a fixed cap. The 90° angled inlet adaptors (AI0496BAG.2 & AI0505SBAG.2) incorporate stainless-steel strainers, integral spherical valves and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. From November 2020 the products are also available with chrome plated brass inline inlet adaptors (AI090815.1 & AI090822.1), each incorporating a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). They can also be supplied with chrome plated brass 90° angled inlet adaptors (AI0496BAG.1 & AI0505SBAG.1) which incorporate a stainless-steel strainer, integral spherical valves and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Exposed thermostatic shower blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a single lever operating memerb. Temperature is controlled independeanlty via a thermostatic cartridge, also using a single lever operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted exposed thermostatic shower mixing valve with brass bodies (various finish) incorporating a ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Model 13108 incorporates a manual diverter headwork which controls flow and diverts water to either handset or shower head with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets), incorporating either a quarter turn or half turn ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Each inlet incorporates a stainless-steel strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate that it provides backflow protection. The product incorporates a manual diverter that diverts the flow from the overhead shower to a shower hose and handset (not supplied as part of the approval). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of thermostatic blending valves (chromium plated brass body) with a thermostatic cartridge controlling the temperature. The inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T-type thermostatic blending valve (chromium plated DZR brass). The inlets incorporate stainless steel strainers and single check valve cartridges (verified by test - suitable for backflow prevention against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) incorporating a thermostatic cartridge controlling the temperature with a manual override button and dome, single lever, cubed or cross top operating members. Flow is controlled via a ceramic disc diverter which also diverts water to two different outlets. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed thermostatic shower valves (chromium plated brass bodies). Flow is controlled to three separate outlets via a ‘detent’ (push on/push off) headwork that also incorporates a half turn ceramic disc (rotary control) to adjust the volume of water to either overhead shower, shower handset or both. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The hot and cold inlets within the valve body each incorporate a non-approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. This approval includes a shower hose, handset and overhead shower Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve (plastic body) with a trim set (chrome plated). Flow is controlled via ‘detent’ (push on/push off) headwork that also incorporates a ceramic disc (rotary control) to adjust the volume of water. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Each inlet incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and shower handset. The inlet to the shower handset incorporates a plastic strainer and plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatically controlled shower valves with brass bodies. Flow is either controlled by a ceramic disc headwork or 3-way manual diverter. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provide backflow protection. Maximum working pressure 10.0 bar, Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower valves, comprising of a concealed body and trim set (chrome plated brass), an overhead shower and a shower handset. The flow is controlled by a 3-position manual diverter with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, shower valve (chromium plated brass), incorporating a ceramic disc diverter with a dome type operating member controlling the flow between an overhead shower outlet and a shower hose and handset. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset incorporates a plastic strainer on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of T-type thermostatic mixing valves with DZR brass bodies. Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.
Range of T-type thermostatic blending valves with DZR brass bodies (various finishes). Each inlet of the Heat 112010 Easifit TMV model (compression connections) incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The inlets of all other Easifit TMV models (push-fit connections) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models Heat155002 Easifit & Heat155010 Easifit to be used with copper (EN 1057), PB (BS7291-2) & PEX (BS7291-3) pipe. All other models to be used with copper (EN 1057). Maximum working pressure of 6.0 bar (model Heat 112010 Easifit. Maximum working pressure of 10.0 bar (all other models). Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with brass bodies and EPDM ‘O’-rings. Maximum working pressure 14.0 bar. Maximum operating temperature 90°C
Grohe ‘NTempeste Cosmopolitan 210’ wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate a combined washer and stainless steel strainer. Both the inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The overhead shower and the shower handset incorporate a plastic strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Grohe ‘NTempCosmopolitan 210’ wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate a combined washer and stainless steel strainer. Both the inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The overhead shower and the shower handset incorporate a plastic strainer and plastic flow regulator on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either shower outlet. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge both have single lever operating members. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of T-type thermostatic blending valves with chrome plated DZR brass bodies incorporating angled inlets with integral spherical valves. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C
Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a half turn ceramic disc headwork controlling the flow, thermostatic cartridge controlling the temperature and dome operating members with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protectionProduct is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted, thermostatic blending valve shower sets, incorporating a ceramic disc headwork with single lever operating member controlling and diverting the flow to either overhead shower outlet or shower handset. Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a chrome plated wall elbow, shower hose, shower handset and overhead shower with arm. The shower handset has a plastic strainer on the inlet. The overhead shower and the shower handset inlets incorporate a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type, thermostatic shower mixing valves (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic with a dome type operating member incorporating a manual over ride button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60 °C
Range of wall mounted two-hole, thermostatic blending valves (chromium plated brass) incorporating a non-rising spindle headwork with single lever operating member. Both inlets incorporate a stainless-steel strainer and approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides adequate backflow protection. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model 3663602665083 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either a shower outlet or a combined bath filler and overflow. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge have single lever operating members. Both inlets to the main shower valve as well as to the combined bath filler/overflow incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets to the main shower valve also incorporate a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (SH-T8089 model), dome (SH-T80810 model) or cross top (SH-T80811 model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a single sequential headwork with a single lever operating member. The inlet couplings incorporate a plastic flow regulator & plastic strainer. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC
Range of concealed ‘T’ type thermostatic blending valves (chromium plated DZR brass bodies). The inlets incorporate a stainless steel strainer and single check valve cartridge, however, the complete product has not been fully tested to demonstrates it provides backflow prevention. The inlets of models PEG402UA, PEG402UAX, TX402UA, TX402UAX incorporate spherical valves. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of concealed wall mounted thermostatic shower valves with brass bodies incorporating quarter turn ceramic disc headwork and a two-way, half-turn ceramic disc manual diverter. Temperature is controlled independently via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets on the ½” models also incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C
Range of thermostatic blending valves (chromium plated or nickel plated brass). Both inlets incorporate a plastic strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Page 1 of 14
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
