Combination Tap Assemblies

Section Code 0470 : Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#1901006

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1901006
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 15mm compression end connections.
Marking:
Ideal Standard on operating member.
Installation Requirements:
R001 R006 R010
Model:
B2136AA Calista.
Manufacturer:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval

#1911900

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911900
Expiry date:
31/12/2024
Size:
15mm copper inlet tails
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
VAL SNK C CD
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1906704

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906704
Expiry date:
30/06/2024
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections
Marking:
Hansgrohe on front base of body
Installation Requirements:
R001 R006 R009 R010
Model:
14 870 XXX Hansgrohe Talis S² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg
Country
Germany

View All Listings by this Company

Print This Approval

#1905353

Range of single hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headwork with dome type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905353
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating a 3/8” captive nut end connections.
Marking:
Kind logo on rear of body
Installation Requirements:
R001 R006 R010
Model:
JD-SK103** & JD-SK103-1**. ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
Manufacturer:
Guangzhou Kind Architecture Material Technology Co., Ltd.
Company Name
Guangzhou Kind Architecture Material Technology Co., Ltd.
Address
Unit 8 No 1 Dashadi West Huangpu District
Country
Guangzhou

View All Listings by this Company

Print This Approval

#1905339

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905339
Expiry date:
31/05/2024
Note:
This approval is only for the tap and doesn’t include the reverse osmosis unit.
Size:
Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
Marking:
Kona (Geann Industrial Co. Ltd. logo) on body
Installation Requirements:
R001 R006 R010 R170
Model:
OZ-1000 Ozone.
Manufacturer:
Geann Industrial Co. Ltd.
Company Name
Geann Industrial Co. Ltd.
Address
29 Tou-Lun Lane, Tou-Lun Li, Lukang Town
Country
Changhua County,

View All Listings by this Company

Print This Approval

#1905374

Single hole, single outlet (swivel) combination tap assembly (matt black finish) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 15.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905374
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Meir logo and date of manufacture (MMYY) on body.
Installation Requirements:
R001 R006 R009 R010
Model:
MK03
Manufacturer:
Meir Australia UK Ltd
Company Name
Meir Australia UK Ltd
Address
71 Queen Victoria Street London
Postcode
EC4V 4BE

View All Listings by this Company

Print This Approval

#1905385

Range of three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes brass) incorporating quarter turn ceramic disc headwork with cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905385
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Kind logo on operating member
Installation Requirements:
R001 R006 R010
Model:
JD-WB707** ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
Manufacturer:
Guangzhou Kind Architecture Material Technology Co., Ltd.
Company Name
Guangzhou Kind Architecture Material Technology Co., Ltd.
Address
Unit 8 No 1 Dashadi West Huangpu District
Country
Guangzhou

View All Listings by this Company

Print This Approval

#1907703

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a quarter turn ceramic disk headwork with a single lever operating member. The spout outlets incorporate a plastic aerator and the products are supplied with a metal backnut. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907703
Expiry date:
31/07/2024
Size:
½” BSP (M) inlet
Marking:
T&S on end of spout and on operating member.
Installation Requirements:
R001 R006
Model:
UK-1DF00, UK-1DF06, UK-1DF08, UK-1DF10, UK-1DF12. Models added October 2020 UK-1DF00-WH4, UK-1DF06-WH4, UK-1DF08-WH4, UK-1DF10-WH4 & UK-1DF12-WH4
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval

#1905050

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating a ceramic cartridge headwork with a joystick type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905050
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assemblies incorporating ⅜” captive nut end connections
Marking:
AXOR on front of body
Installation Requirements:
R001 R006 R009 R010
Model:
10 801 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval

#1910700

Single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating half turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts and a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910700
Expiry date:
31/10/2024
Note:
No testing performed on pop-up waste.
Size:
10mm compression
Marking:
AXOR on front base of body
Installation Requirements:
R001 R006 R010
Model:
17 030 xxx AXOR Carlton Where xxx denotes finish available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval

#1905078

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator or plastic flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905078
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Model:
M1007A & M1007B (chromium plated brass) Models added September 2021: M1007A MBK1 (Matte black) M1007A BGP (Brushed Brass)
Factor:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1907704

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a metal backnut. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907704
Expiry date:
31/07/2024
Size:
M10 Female inlet
Marking:
T&S on body, spout and on operating member.
Installation Requirements:
R001 R006 R010
Model:
UK-2DF00, UK-2DF06, UK-2DF08, UK-2DF10 & UK-2DF12, Models added October 2020 UK-2DF00-WH4, UK-2DF06-WH4, UK-2DF08-WH4, UK-2DF10-WH4 & UK-2DF12-WH4.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval

#1905047

Range of single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905047
Expiry date:
31/05/2024
Size:
Stainless steel braided thermoplastic silicone lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR on base of body.
Installation Requirements:
R001 R006 R009 R010
Model:
14 850 XXX AXOR UNO SINGLE LEVER KITCHEN MIXER Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval

#1911901

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911901
Expiry date:
30/11/2024
Size:
15mm copper inlet tails
Marking:
SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
C58123
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval

#1906067

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes - plated brass) incorporating quarter turn ceramic disc or non-rising spindle (M04054 model only) headworks with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906067
Expiry date:
30/06/2024
Size:
All models: Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections. M04054 model also supplied with: 15mm copper tails
Marking:
PPI on rear of tap body
Installation Requirements:
R001 R006 R010
Model:
M9007T A, M9007T, M9007T BN, M9007QL, M3107 & M5010K Model added January 2020: M9007T A BN Model added March 2020: M04054 Model added November 2021: M9007T A MBK1 Model added September 2022: M9007T A BGP
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1906094

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic/rubber aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906094
Expiry date:
30/06/2024
Size:
Stainless steel braided, PE-X lined flexible hose assemblies with 3/8” captive nut.
Marking:
AXOR on side of body.
Installation Requirements:
R001 R006 R009 R010
Model:
38 830 xxx Axor Uno² & 39 850 xxx Axor Citterio. Model added May 2021: 39 853 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval

#1906309

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with A single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906309
Expiry date:
30/06/2024
Note:
No testing on pop-up waste
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Grohe on body
Installation Requirements:
R001 R006 R009 R010
Model:
Grohe Eurodisc Cosmopolitan OHM 32.054.003
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval

#1906344

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and pull down spray. The inlet hoses incorporate a combined washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906344
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 1/2” captive nut end connections
Marking:
Gaoao logo (‘GAOAO’) on body
Installation Requirements:
R001 R006 R009 R010
Model:
ZA3083
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval

#1907004

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907004
Expiry date:
31/07/2024
Size:
Stainless steel braided polyethylene lined flexible hoses incorporating 3/8” BSP captive nut end connections, with optional 15mm compression fittings
Marking:
Ideal Standard on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
B0744AA Tempo
Factor:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval

#1907011

Single hole, single outlet (swivel) combination tap assembly incorporating a quarter turn ceramic disc headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907011
Expiry date:
31/07/2024
Size:
15mm copper tails
Marking:
Blanco on front of body
Installation Requirements:
R001 R006 R010
Model:
BM/5300 Blanco Eye
Factor:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company
Manufacturer:
Guglielmi S.p.A. Rubinetterie
Company Name
Guglielmi S.p.A. Rubinetterie
Address
Via Arturo Biella 27 Grignasco (Novara) Italy

View All Listings by this Company

Print This Approval

#1907905

Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork or quarter turn ceramic disc headwork (with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907905
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
Marking:
Cascade on body or operating member
Installation Requirements:
R001 R006 R010
Model:
011.1120.3 & 012.1120.3.
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1907908

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907908
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
Marking:
Cascade on operating member
Installation Requirements:
R001 R006 R010
Model:
015.1120.3
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1907360

Range of two hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 5.5 Bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907360
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
NSS (abbreviation of manufacturer) on body.
Installation Requirements:
R001 R006
Model:
ACT2044 & TDM1CM
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Ningbo Swan Sanitary Company
Company Name
Ningbo Swan Sanitary Company
Address
Taoyuan Village Hengjjie Town Haishu Dist
Postcode
China
Country
Ningbo
General Email

View All Listings by this Company

Print This Approval

#1907368

Range of two hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 5.5 Bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907368
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
NSS (abbreviation of manufacturer) on body.
Installation Requirements:
R001 R006
Model:
ACT2045, TDM1CM/LV, TAP9023
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
Ningbo Swan Sanitary Company
Company Name
Ningbo Swan Sanitary Company
Address
Taoyuan Village Hengjjie Town Haishu Dist
Postcode
China
Country
Ningbo
General Email

View All Listings by this Company

Print This Approval

#1907918

Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork or quarter turn ceramic disc headwork (with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907918
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
Marking:
INFINITA REGISTERED TRADEMARK OF FORTIS ON BASE OF TAP BODY OR OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
INF-AGU-001 & INF-AZA-001
Factor:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval

#1907919

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907919
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
Marking:
INFINITA REGISTERED TRADEMARK OF FORTIS ON BASE OF TAP BODY
Installation Requirements:
R001 R006 R010
Model:
INF-VID-001
Factor:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval

#1905086

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905086
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
Marking:
NABIS (BRAND OF WOLSELEY) ON BASE OF TAP BODY
Installation Requirements:
R001 R006 R010
Model:
B08913 COSTENO
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval

#1906123

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906123
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.
Marking:
NABIS ON OPERATING MEMBER NABIS ON INDICE ON MODEL B0819 ONLY
Installation Requirements:
R001 R006 R010
Model:
B08927, B08923 & B08917
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval

#1909321

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated or brushed nickel brass or black coloured finish), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909321
Expiry date:
30/09/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Caple on body
Installation Requirements:
R001 R006 R010
Model:
AVE4/CH, AVE4/BN, WAS4/CH, WAS4/BN & ZUBQ4/CH. Model added March 2020: AVE4/BC.
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval

#1909334

Single hole, single outlet (swivel) combination tap assembly (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 4.1 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909334
Expiry date:
30/09/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Kohler on face plate
Installation Requirements:
R001 R006 R009 R010
Model:
985W-4-** Where ** denotes finish and can be replaced by: BZ - Antique Bronze. SA - Antique Silver. 96 – Biscuit. 7 – Black. W7 - Black Nickel. LB – Bronze. G - Brushed Chrome. AG - Brushed Nickel. BS - Brushed Stainless. FGN – Chartreuse. FRD - Cherry Red. GN – Gunmetal. BL - Matte Black. YG - Matte Gold. FNY - Navy Blue. AD - Nickel Silver. R2B - Oil Rubbed Bronze-Gold. 2BZ - Oil Rubbed Bronze. CP - Polished Chrome. 1CP - Polished Chrome. ABS PGD - Polished Gold. 24K - Polished Gold. S - Polished Stainless. AGP PVD - Brushed Nickel. 24P PVD - Polished Gold. ADP PVD - Silver Nickel. FBG - Retro Blue. RGD - Rose Gold. TB - Satin Black. SSL - Sterling Silver. TT – Titanium. ULB - Un-lacquered Brass. BV - Vibrant Brushed Bronze. BN - Vibrant Brushed Nickel. AF - Vibrant French Gold. BGD - Vibrant Modern Brushed Gold. PB - Vibrant Polished Brass. SN - Vibrant Polished Nickel. VS - Vibrant Stainless. VNT – Vintage Nickel. W6 - Weathered Bronze. 0 – White, MB - Modern Brass.
Factor:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000

View All Listings by this Company
Manufacturer:
Kohler Co
Company Name
Kohler Co
Address
444 Highland Drive Kohler Wisconsin
Country
53044

View All Listings by this Company

Print This Approval

#1909349

Grohe ‘Get’ Single hole, single outlet (fixed/swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating members and pull-out spray (with self-closing trigger assembly). The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909349
Expiry date:
30/09/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating 1/2” end connections.
Marking:
Grohe on body
Installation Requirements:
R001 R006 R009 R010
Model:
30.360
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval

#1909358

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body) incorporating a ceramic cartridge headwork with single lever operating members. The products incorporate a connection for filtered water supply controlled by quarter turn ceramic disc headwork. The spout outlets incorporate plastic aerator. Maximum working pressure 12.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909358
Expiry date:
30/09/2024
Size:
Please refer to model.
Marking:
SMR on rear of body
Installation Requirements:
R001 R006 R010
Model:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections: AT3 filter, AT4 filter, HP1 filter, Athos filter. 15mm copper tails: HP2 filter & AT5 filter Model added April 2020 has stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections: Auxerre Filter.
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 Pray Biellese (Biella) 13867 Italy

View All Listings by this Company

Print This Approval

#1909369

Range of single hole, single outlet (swivel) combination tap assemblies (in various finishes). Incorporating a quarter turn ceramic cartridge headwork with spring loaded return to the closed position controlling flow of the boiling water outlet and a ceramic cartridge headwork controlling flow from the hot and cold supply with dome type and lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar on the hot and cold supply, 3.0 bar on the boiling water supply. Maximum operating temperature 65°C on the hot and cold supply, 99°C on the boiling water supply.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909369
Expiry date:
30/09/2024
Note:
Water boiler is not included as part of this approval
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Cassellie on base of body
Installation Requirements:
R001 R006 R009 R120 R150
Model:
KTA028, KTA029, KTA030, KTA031, KTA032 & KTA051 – with L spout shape KTA027, KTA045, KTA046, KTA047, KTA049 & KTA050 – with C spout shape All available in the following finishes – Chrome Brushed Nickel Gunmetal Grey Brushed Gold Brushed Copper Black Models added December 2019: Models are available with optional Silicone outlet hoses.
Manufacturer:
CASSELLIE LTD
Company Name
CASSELLIE LTD
Address
UNIT 1-6 HOWDEN WAY MORLEY LEEDS
Postcode
LS27 OTF

View All Listings by this Company

Print This Approval

#1909903

Single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 3.0 bar. Maximum operating temperature 85°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909903
Expiry date:
30/09/2024
Size:
Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections
Marking:
Bristan on tap body
Installation Requirements:
R001 R006 R010
Model:
9L233901CPBK3T
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1905087

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905087
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
Marking:
TP on rear of body.
Installation Requirements:
R001 R006 R010
Model:
158714 LANGDALE MONOBLOC SINK MIXER
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Country
Northhampton
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval

#1910302

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed gold PVD). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910302
Expiry date:
31/10/2024
Size:
Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
PPI on rear of main body
Installation Requirements:
R001 R006 R009 R010
Model:
187007 187007 BGP Models added 19/07/2021 187007 SS4
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1910303

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass, brushed gold PVD or stainless steel finish). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 5 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910303
Expiry date:
31/10/2024
Size:
Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
PPI on rear of main body
Installation Requirements:
R001 R006 R009 R010
Model:
187006 187006 BGP Model added July 2021: 187006 SS4
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1910332

Range of single hole, single outlet (swivel) combination tap assemblies having brass bodies (in various finsihes). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910332
Expiry date:
31/10/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Phoenix on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
1194‐SSBP7, 1194‐SSCP7, 1195‐SSBP7, 1195‐SSCP7, 1183‐SSBP7, 1142‐BRCP7, 1184‐SSBP7 & 1184‐SSCP7 COMBINATION TAP ASSEMBLIES
Manufacturer:
Phoenix Success Sanitary Wares Co.,Ltd
Company Name
Phoenix Success Sanitary Wares Co.,Ltd
Address
Building E, Shaen Sanitaryware, Dongxi District Airport Zhishan Town
Country
Heshan

View All Listings by this Company

Print This Approval

#1910028

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910028
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Comap on body
Installation Requirements:
R001 R006 R010
Model:
922019 – Comap tempest CP mono sink mixer
Factor:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT
Country
Leigh

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval

#1910044

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with optional plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910044
Expiry date:
31/10/2024
Size:
Stainless steel braided TPSiV lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Blanco on top of operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
BM9301 Blanco City
Factor:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#1910051

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straighter. The inlet hoses incorporate a combined stainless steel strainer and rubber washer. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910051
Expiry date:
31/10/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on body.
Installation Requirements:
R001 R006 R009 R010
Model:
60108-7201
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval

#1910902

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910902
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Cascade logo on operating member
Installation Requirements:
R001 R006 R010
Model:
013.1120.3
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1910904

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium or nickel plated), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener (models CNN EFSNK C & CNN EFSNK C TO) all other models incorporate a plastic aerator . Supplied with single check valves, verified by test (suitable for backflow protection against Fluid Category 2) incorporating a servicing valve. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910904
Expiry date:
31/10/2024
Note:
Tap only models are sold without the EasyFit base or connection hoses, but are only compatible with EF KIT PK
Size:
15mm compression to combined isolation valve/check valve
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
BLB EFSNK C, BLB EFSNK C TO (Tap only), CNN EFSNK C, CNN EFSNK C TO (Tap only), LMN EFSNK C, LMN EFSNK C TO (Tap only), LMN EFSNK BN (Brushed nickel), LMN EFSNK BN TO (Tap only, brushed nickel). Models added January 2021: CNN EFSNK BN & CNN EFSNK BN TO
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144

View All Listings by this Company

Print This Approval

#1910907

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating ¼” turn ceramic disk headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910907
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections
Marking:
Cascade on front of body
Installation Requirements:
R001 R006 R010
Model:
014.1120.3
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1910911

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating ¼” turn ceramic disk headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910911
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections
Marking:
INFINITA (REGISTERED TRADEMARK OF FORTIS) ON BASE OF TAP BODY
Installation Requirements:
R001 R006 R010
Model:
INF-LUV-001
Factor:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval

#1910912

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910912
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
INFINITA (REGISTERED TRADEMARK OF FORTIS) ON BASE OF TAP
Installation Requirements:
R001 R006 R010
Model:
INF-HIE-001
Factor:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval

#1910330

Range of single hole, single outlet (swivel) combination tap assemblies having brass bodies (in various finishes). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910330
Expiry date:
31/10/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Phoenix on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
1106-SSBP7 1106-SSCP7 1105-SSBP7 1105-SSCP7 Where – BP is brushed CP is chrome plated
Manufacturer:
Phoenix Success Sanitary Wares Co.,Ltd
Company Name
Phoenix Success Sanitary Wares Co.,Ltd
Address
Building E, Shaen Sanitaryware, Dongxi District Airport Zhishan Town
Country
Heshan

View All Listings by this Company

Print This Approval

#1910064

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910064
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
REGINOX ON FRONT OF TAP BASE
Installation Requirements:
R001 R006 R010
Model:
ALPINE KITCHEN MIXER CP
Factor:
Reginox UK Ltd.
Company Name
Reginox UK Ltd.
Address
Units 1-4 Radnor Park Trading Estate, Back Lane, Congleton
Postcode
CW12 4XJ
Country
Cheshire

View All Listings by this Company

Print This Approval

#1910063

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910063
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
INSTINCT ON FRONT OF TAP BODY
Installation Requirements:
R001 R006 R010
Model:
PARAGON KITCHEN MIXER CP
Factor:
Plumbing & Heating Group
Company Name
Plumbing & Heating Group
Address
C/O Tippers Builders Merchants, Europa Way, Lichfield
Postcode
WS14 9TZ

View All Listings by this Company

Print This Approval

#1910335

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (with various finishes) having ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910335
Expiry date:
31/10/2024
Marking:
Clearwater on main body
Installation Requirements:
R001 R006 R010
Model:
ZO2CP Z03CP Z03BN Z04CP Z04BN ZO2BN ZO3CP ZO3BN ZO4CP ZO4BN Where: CP = chrome plated BN = brushed nickel
Manufacturer:
Clearwater Products Ltd
Company Name
Clearwater Products Ltd
Address
Shannon Place Tewkesbury Place
Postcode
GL20 8SL

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 11

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.