COMAP (JIANGMEN) Approvals

WRAS Approval Number: 1709025

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1709025
  • Expiry date: 30/09/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: Francis pegler on base front of tap spout.
  • Installation Requirements R001 R006 R010
  • Model
    Xia 4P1042
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1709041

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 0490 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, double outlet, swivel.
  • WRAS Approval Number: 1709041
  • Expiry date: 30/09/2022
  • Size: 15mm copper inlet tails.
  • Marking: Francis Pegler on operating members.
  • Installation Requirements R001 R006
  • Model
    4G4010 Haze
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1802701

Pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 6.0 Bar. Maximum operating temperature 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1802701
  • Expiry date: 28/02/2023
  • Size: ½” BSP (M).
  • Marking: COMAP ON INDICE
  • Installation Requirements R001 R006
  • Model
    Leger L502 CP
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1710031

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The 4G4090 model is supplied with optional plastic flow regulators for installation on each inlet hose. The 4G4094 model is supplied with a click type waste. The 4G4090 and 4G4093 models are both supplied with a pop-up type waste. Maximum working pressure 6.0 Bar. Maximum working temperature 85°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710031
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided EPDM line flexible hoses assemblies with ½” captive nut end connections.
  • Marking: Francis Pegler on operating member
  • Installation Requirements R001 R006 R010
  • Model
    4G4090 – Izzi Eco Mono Basin Mixer, 4G4093 – Izzi Mono Basin Mixer & 4G4094 – Izzi SL Mini Mono Basin Mixer.
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1710032

Pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 6.0 Bar. Maximum operating temperature 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1710032
  • Expiry date: 31/10/2022
  • Size: ½” BSP (M)
  • Marking: Francis Pegler on operating member
  • Installation Requirements R001 R005
  • Model
    4G4091
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1711069

Single hole, metal single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711069
  • Expiry date: 30/11/2022
  • Size: 15mm copper tails
  • Marking: Francis Pegler on operating member
  • Installation Requirements R001 R006 R010
  • Model
    4G4099 - Izzi
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1711026

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711026
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: Francis Pegler on base of tap body.
  • Installation Requirements R001 R006 R010
  • Model
    Elecktro Sink Mixer - 487000
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1712024

A single hole, single outlet (swivel) combination tap assembly (chromium plated brass body), incorporating two none rising spindle headworks and a dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712024
  • Expiry date: 31/12/2022
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” BSP captive nut
  • Marking: Mercia on front of tap body
  • Installation Requirements R001 R006 R010
  • Model
    Mercia Modern 4M3917
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1712025

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a quarter turn ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712025
  • Expiry date: 31/12/2022
  • Size: Stainless steel braided, EPDM lined hose assembly with ½” BSP captive nut connection
  • Marking: Francis Pegler on operating member
  • Installation Requirements R001 R006 R010
  • Model
    Adorn Horizontal 4G4175
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval

WRAS Approval Number: 1801010

Wall mounted self-closing taps (chromium plated brass) incorporating spring loaded headwork, dome type operating member and plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 1801010
  • Expiry date: 31/01/2023
  • Size: ½” BSP (M)
  • Marking: Performa on operating member
  • Installation Requirements R001 R040
  • Model
    360077/78 – Performa P880 Bib Tap (Hot & Cold)
  • Factor: Comap
    Company Name
    Comap
    Address
    Unit C6, William Way Moss Industrial Estate St Helens Road
    Postcode
    WN7 3PT
    View All Listings by this Company
  • Manufacturer: COMAP (JIANGMEN)
    Company Name
    COMAP (JIANGMEN)
    Address
    98 Longxi High Tech Zone Guangdong
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 5

© WRAS 2022

Site Developed By Duo