Range of inline water filter cartridges with polypropylene housing with a carbon block filter. Maximum working pressure 8.5 Bar Cold water use only.

Section:

1055 Filter Cartridges

WRAS Approval Number:

2109062

Expiry date:

30/09/2026

Size:

15.6mm OD

Marking:

Clearwater, max temperature, max pressure, model and other technical info on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Model:

PURE F6C1 & PURE F12C1 FILTER CARTRIDGE

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company

Single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with a single lever, cross top or dome type operating member. The spout outlets incorporate either a plastic flow straightener or aerator supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101079

Expiry date:

31/01/2026

Note:

No inlet hoses included as part of this approval.

Size:

M10 or M12 (F)

Marking:

CW on tap body.

Installation Requirements:

R001 R006 R010

Model:

SI81045CP – Siren combination tap assembly

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

241002072

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/10/2029

Size:

M10 (F)

Marking:

Clearwater logo on body

Installation Requirements:

R001 R006 R010

Model:

ZO2CP,ZO2BN,ZO3CN,ZO3BN,ZO4CP,ZO4BN

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

241002074

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/10/2029

Size:

M12 (F)

Marking:

Clearwater logo on body

Installation Requirements:

R001 R006 R010

Model:

27113CP & 27113BS

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

241002083

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/10/2029

Size:

M10 (F)

Marking:

CW on body

Installation Requirements:

R001 R006 R010

Model:

Z02AB ZO2MB Z02RC Z03AB Z03MB Z03RC

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company