Combination Tap Assemblies
Section Code 0450 : Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #1909356
Range of single hole, single outlet (fixed) combination tap assemblies (stainless steel bodies), incorporating ceramic cartridge headworks, with single lever operating members. The spout outlet incorporates a plastic aerator.
The product is supplied with a pop-up waste and ⅜” BSP (M) x ½” captive nut brass adaptors - intended for installation at the inlets.
Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909356
- Expiry date:
- 30/09/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
- Marking:
- Gessi on operating member
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
54004,
54009,
54104,
54109,
54204,
54209,
54304,
54309,
54404 &
54409.
- Manufacturer:
- Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio
13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
View All Listings by this Company
WRAS Approval Number: #1909386
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with single lever top operating members.
The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 10 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909386
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
- Marking:
- Xinya on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
873B
874B
- Manufacturer:
- Taizhou Xinya Sanitary Ware Co. Ltd.
Company Name
Taizhou Xinya Sanitary Ware Co. Ltd.
Address
Qinggang Sci-Tech Industrial Area
Yuhuan
Zhejiang 317606
Country
P.R.China
View All Listings by this Company
WRAS Approval Number: #1909001
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909001
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided polyethylene lined flexible hose assemblies with ⅜” captive nut end connections and ⅜” BSP (M) x 15mm compression adaptors.
- Marking:
- Ideal standard logo on top of operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
B2326AA – CERAFLEX BSN MXR GRANDE R-MTD CHR, NO PUW
Model added May 2021:
B1714AA - CERAFLEX ONE-HOLE BASIN MIXER GRANDE
- Factor:
- Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1)
Armitage,
Rugeley,
Staffordshire
Postcode
WS15 4BT
View All Listings by this Company
WRAS Approval Number: #1909002
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass finish) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener or optional plastic aerator. Some products are supplied with a pop-up or click type waste.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909002
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided polyethylene lined flexible hose assemblies with ⅜” captive nut end connections and ⅜” BSP (M) x 15mm compression adaptors.
- Marking:
- Ideal Standard on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
BC334AA- ESINO SL Basin mixer chrome with CLICK waste,
BC335AA- ESINO SL Basin mixer GRANDE chrome with CLICK waste,
BC322AA- Dot 2.0 SL Basin mixer chrome with CLICK waste,
BC680AA Alpha Basin Mixer with PUW,
BC678AA Alpha Basin H75 Mixer no PUW,
BC679AA Alpha Basin H75 Mixer no PUW.
- Factor:
- Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1)
Armitage,
Rugeley,
Staffordshire
Postcode
WS15 4BT
View All Listings by this Company
WRAS Approval Number: #1909009
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass).
The T6502 model incorporates quarter turn ceramic disc headwork with single lever operating members.
Model T6302 incorporates non-rising spindle headworks with dome type operating members.
The spout outlets incorporate a plastic flow straightener.
Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909009
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Zhejiang Xindong Sanitary Ware Co. Ltd. logo on body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
T6302 & T6502
- Manufacturer:
- Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone
Yuhuan,
Zhejiang
Country
China
View All Listings by this Company
WRAS Approval Number: #1909013
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straighter. The product is supplied with an optional plastic aerator and a click type waste.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909013
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided polyethylene lined flexible hose assemblies with ⅜” captive nut end connections and ⅜” BSP (M) x 15mm compression adaptors.
- Marking:
- Ideal Standard logo on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
BC329AA– DESNA SL Basin mixer GRANDE chrome with
CLICK waste
- Manufacturer:
- Ideal Standard – Vidima AD
Company Name
Ideal Standard – Vidima AD
Address
View All Listings by this Company
WRAS Approval Number: #1912701
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc and single lever operating members (351906 model) or non-rising spindle headworks (4M3904 & 4M1906 models) with either cross top (4M1906 model) or dome type (4M3904 model) operating members.
The spout outlet incorporates a plastic aerator or a flow straightener, supplied with both.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1912701
- Expiry date:
- 31/12/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Mercia (brand of Comap) on front base of body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
4M3904 MERCIA MODERN,
4M1906 MERCIA TRADITIONAL MONO,
351906 MERCIA QT.
- Manufacturer:
- Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way
Moss Ind Estate
St Helens Road
Postcode
WN7 3PT
Country
Leigh
View All Listings by this Company
WRAS Approval Number: #1909033
Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature with a single lever operating member. The product is supplied with copper tails, two check valve cartridge housings each containing an approved check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2) and two inline screwdriver operated isolation valves for installation on each inlet.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909033
- Expiry date:
- 30/09/2024
- Size:
- 15mm Compression (to isolation valve).
- Marking:
- Model number and date of manufacture (MM/YY) on back of body. Twyford on operating member
- Installation Requirements:
- R001 R006
- Model:
-
SF1139CP
- Factor:
- Twyford Bathrooms Geberit Service
Company Name
Twyford Bathrooms Geberit Service
Address
Geberit House,
Edgehill Drive,
Warwick
Postcode
CV34 6NH
View All Listings by this Company
WRAS Approval Number: #1909037
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener (130438 & 900108 models) or a plastic aerator (131738 model). The products are supplied with a click type waste.
Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909037
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
- Marking:
- PPI on rear of body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
131738.
130438.
900108.
130438 BGP added December 2022
- Factor:
- PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road
Xinyang Industrial Zone
Haicang District
Xiamen 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #1909051
Range of single hole, single outlet fixed combination tap assemblies (various finishes) incorporating quarter turn ceramic disc headworks with dome type operating members.
The temperature is controlled via a thermostatic mixing cartridge with dome type operating member. The spout outlet incorporates an adjustable rubber spray insert.
The inlet hoses each incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909051
- Expiry date:
- 30/09/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided PE-X lined flexible hose assemblies with ⅜” captive nut end connections.
- Marking:
- AXOR on body.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
12 010 xxx Axor Starck Organic 2-handle basin mixer 80 with pop-up waste set
12 011 xxx Axor Starck Organic 2-handle basin mixer 80 without pull-rod
12 012 xxx Axor Starck Organic 2-handle basin mixer 170 without pull-rod for wash bowls
12 013 xxx Axor Starck Organic 2-handle basin mixer 240 without pull-rod for wash bowls
12 014 xxx Axor Starck Organic 2-handle basin mixer 50 with pop-up waste set for hand wash basins
available in -000 (Chrome) and customized finishes:
-020 PVD polished chrome
-260 PVD brushed chrome
-830 PVD polished nickel
-820 PVD brushed nickel
-990 PVD polished gold optic
-250 PVD brushed gold optic
-300 PVD polished red gold
-310 PVD brushed red gold
-130 PVD polished bronze
-140 PVD brushed bronze
-330 PVD polished black chrome
-340 PVD brushed black chrome
-930 PVD polished brass
-950 PVD brushed brass
-800 PVD stainless steel optic
- Manufacturer:
- Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9,
77761 Schiltach
Country
Germany
View All Listings by this Company
WRAS Approval Number: #1909080
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass or matte black), incorporating a ceramic cartridge headwork with single lever operating members.
The spout outlets incorporate a plastic aerator. The AMBCPUK model is supplied with a click type waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909080
- Expiry date:
- 30/09/2024
- Size:
- Model NO CBM01 = M10 threaded.
All other models: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Methven on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
NO CBM01.
AMBCPUK.
AMBCPUK/B.
AMTBCPUK.
AMBMCPUK.
Models added November 2019:
AMBBK
ALBCP
ALBBK
AMBMBK
AMTBBK
- Manufacturer:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #1906129
Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet of models 424816, 449529 & 424853 incorporate a plastic aerator.
Models 424875 & 424851 incorporate a plastic flow regulator on the inlets.
Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1906129
- Expiry date:
- 30/06/2024
- Size:
- Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- IFLO ON REAR OF TAP BODY
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
424875 IFLO TAY BASIN MIXER, 424851 IFLO TAY MINI BASIN MIXER, 449530 IFLO TAY TALL BASIN MIXER, 424853 IFLO BELAYA BASIN MIXER, 424816 IFLO BELAYA MINI BASIN MIXER & 449529 IFLO BELAYA TALL BASIN MIXER
- Factor:
- City Plumbing Supplies/ Plumbing Trade Supplies
Company Name
City Plumbing Supplies/ Plumbing Trade Supplies
Address
PTS HOUSE
ELDON WAY
CRICK
Postcode
NN6 7SL
Country
NORTHAMPTON
View All Listings by this Company
WRAS Approval Number: #1909392
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with single lever top operating members.
The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 10 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909392
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
- Marking:
- AKW on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
08-008-041 MONOBLOC & 12-011-080 AKW
- Factor:
- DLP Limited
Company Name
DLP Limited
Address
Unit L, Snugborough,
Bradden,
Isle of Man
Postcode
IM4 4LH
Country
United Kingdom
View All Listings by this Company
WRAS Approval Number: #1912704
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc and single lever operating members (C48122 model) or non-rising spindle headworks (C48108 & C48106 models) with either cross top (C48106 model) or dome type (C48108 model) operating members.
The spout outlet incorporates a plastic aerator or a flow straightener, supplied with both.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1912704
- Expiry date:
- 31/12/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- SWAN BRAND OF WOLSELEY ON INDICE
- Installation Requirements:
- R001 R006 R010
- Model:
-
C48108 SWAN STANDARD DC BASIN
C48122 SWAN 1/4 TURN LEVER MONO BASIN
C48106 SWAN STANDARD DC BASIN
- Factor:
- Wolseley
Company Name
Wolseley
Address
Kingmaker Court
Warwick Technology Park
Warwick
Postcode
CV34 6DY
View All Listings by this Company
WRAS Approval Number: #1909099
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The products are supplied with a click type waste.
Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909099
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
- Marking:
- NABIS ON OPERATING MEMBER
- Installation Requirements:
- R001 R006 R010
- Model:
-
A05028 NABIS BASIN MIXER
- Factor:
- WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT
WARWICK TECHNOLOGY PARK
WARWICK
Postcode
CV34 6DY
View All Listings by this Company
WRAS Approval Number: #1910903
Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Product is supplied with a click type pop up waste.
Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910903
- Expiry date:
- 31/10/2024
- Size:
- 15mm copper tails
- Marking:
- Bristan on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
J SMBAS C
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1910319
Range of single hole, single outlet (fixed) combination tap assembly (chrome plated brass). Incorporating a single sequential ceramic disc headworks, and single lever operating members.
The spout outlet incorporates a plastic aerator. Inlets incorporate screwdriver operated servcing valves and have stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Maximum working pressure 10 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910319
- Expiry date:
- 31/10/2024
- Size:
- 15mm conmpression
- Marking:
- Twyford on operating member
- Installation Requirements:
- R001 R005 R009 R010
- Model:
-
SF5347CP
- Factor:
- Twyford Bathrooms (Geberit Service)
Company Name
Twyford Bathrooms (Geberit Service)
Address
Caledonian Building Services
Site 2 Off Ossington Road
Newark
Postcode
NG23 6NT
Phone
01270 879777
View All Listings by this Company - Manufacturer:
- Roco TR Banyo A.S
Company Name
Roco TR Banyo A.S
Address
View All Listings by this Company
WRAS Approval Number: #1910012
Range of single hole, single outlet (fixed) combination tap assemblies (black or chromium plated brass) incorporating a ceramic cartridge headwork with, single lever operating member. The spout outlet incorporates a plastic aerator.
The 100208340 & 100208350 models are supplied with a lever type pop-up waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910012
- Expiry date:
- 31/10/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided, PEX lined flexible hose assemblies with ⅜” captive nut end connections and EPDM rubber washers.
- Marking:
- NK Porcelanosa on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
100208340,100208350,100208352,100208353,100208354, 100208355,100208362 & 100208373.
- Factor:
- Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal
Puebla de Arenoso CV 20 KM 2
Country
Spain
View All Listings by this Company
WRAS Approval Number: #1910019
Single hole, single outlet (fixed) combination tap assembly with a brass body (various finishes, see model) incorporating ceramic cartridge headwork, and single lever operating member. The spout outlet incorporates a rubber aerator
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910019
- Expiry date:
- 31/10/2024
- Size:
- Stainless steel braded thermoplastic silicone rubber (TPSiV) lined flexible hoses with ⅜” captive nut end connections
- Marking:
- Hansgrohe on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
31 931 xxx Hansgrohe Focus Single lever bath mixer Monotrou
Where xxx denotes the surface finish (which is a non-water contact part).
It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
- Manufacturer:
- Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9,
77761 Schiltach
Country
Germany
View All Listings by this Company
WRAS Approval Number: #1910039
Range of single hole single outlet floor mounted bath taps with chromium plated brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a combined plastic aerator and plastic flow regulator.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910039
- Expiry date:
- 31/10/2024
- Size:
- 12.7mm Spigot.
- Marking:
- NK Porcelanosa on operating member.
- Installation Requirements:
- R001 R010 R040
- Model:
-
100208363 (Black)
100208374 (Chrome)
- Factor:
- Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal
Puebla de Arenoso CV 20 KM 2
Country
Spain
View All Listings by this Company
WRAS Approval Number: #1911301
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating self-closing headwork with a dome type operating member. Models also incorporate a straightner and metal back nuts.
Maximum operating pressure 3.0 bar. Cold water use only
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1911301
- Expiry date:
- 30/11/2024
- Size:
- 3/8" BSP (M)
- Marking:
- Special Taps logo ‘ST’ (S placed above the letter T) on body
- Installation Requirements:
- R001 R006
- Model:
-
105 push button tap
- Manufacturer:
- Special Taps Srl
Company Name
Special Taps Srl
Address
Via Delle Beulle 11
28010 Cavallirio
Italy
View All Listings by this Company
WRAS Approval Number: #1911322
Single hole, single outlet, fixed combination tap assembly (brass body with various finishes), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1911322
- Expiry date:
- 30/11/2024
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
- Marking:
- Crosswater 'X' logo on rear of body
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
ZR06_110x Basin Monobloc
Where x denotes finish and can be replaced by:
C = Chrome,
V = Stainless steel effect,
F = Brushed brass,
M = Matt Black,
A = Anthracite,
W = White,
B = Brushed Black Chrome,
N = Polished Nickel,
L = Brushed Nickel,
Q = Unlacquered Brass,
RG = Rose Gold,
BGR = Brushed Rose Gold,
P = Copper.
- Factor:
- Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House,
Rennie Drive,
Dartford.
Postcode
DA1 5FU
Phone
0845 873 8840
View All Listings by this Company
WRAS Approval Number: #1911909
Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a stainless-steel aerator.
Maximum operating pressure 5.0 bar. Maximum operating temperature 85°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1911909
- Expiry date:
- 30/11/2024
- Size:
- Stainless steel braided EPDM lined hose assemblies incorporating a ½”
captive nut end connections
- Marking:
- Bristan on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
GWF BASNW C
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1910046
Range of single hole, single outlet (fixed) combination tap assemblies with chromium plated brass bodies. Incorporating a ¼ turn ceramic disc headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910046
- Expiry date:
- 31/10/2024
- Size:
- ½” BSP (M)
- Marking:
- HUANRI on rear of tap body.
- Installation Requirements:
- R001 R006
- Model:
-
4005AG5
4005BD18
- Manufacturer:
- Zhejiang Huanri Sanitation Co Ltd
Company Name
Zhejiang Huanri Sanitation Co Ltd
Address
Xuanmen Industrial Zone,
Lupu Town
Yuhuan County
Zhejiang Province
Country
China
Phone
86 0576 87144858
View All Listings by this Company
WRAS Approval Number: #2003804
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporation quarter turn ceramic disc headworks with single lever operating members.
The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste.
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2003804
- Expiry date:
- 31/03/2025
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- PPI on rear of body.
- Installation Requirements:
- R001 R005 R010
- Model:
-
M5008
- Manufacturer:
- PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road
Xinyang Industrial Zone
Haicang District
Xiamen 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #1912307
Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The INBPUWCPUK model is supplied with a pop-up waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1912307
- Expiry date:
- 31/12/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- DTC (brand of Methven) on body
Marking from November 2020:
DTC53 (brand of Methven) on rear of body.
Methven on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
WAIBCPUK - Wai.
WAIBMCPUK - Wai.
WAITBCPUK - Wai.
ZON313 - Zonos.
ETH313 - Ethos.
INBPUWCPUK - Indra.
From November 2020 the following new finishes have been added:
WAIBCPUK:
WAIBBB - Brushed Brass
WAIBBK - Matte Black
WAIBBN - Brushed Nickel
WAIBGM - Gunmetal
WAIBMCPUK:
WAIBMBB - Brushed Brass
WAIBMBK - Matte Black
WAIBMBN - Brushed Nickel
WAIBMGM - Gunmetal
WAITBCPUK:
WAITBBB - Brushed Brass
WAITBBK - Matte Black
WAITBBN - Brushed Nickel
WAITBGM - Gunmetal
Models added May 2023:
77410
T-ETH313BK - Matte Black
T-ETH313BB - Brushed Brass
T-ZON313
Model added September 2023:
ETH313BK
SVL313
- Factor:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #1912904
Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a pop-up waste.
Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1912904
- Expiry date:
- 31/12/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections
- Marking:
- Bristan on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
BRT SQU2 BAS C
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #2001002
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses.
These products are also supplied with a click type waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001002
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
- Marking:
- Francis Pegler (brand of Comap) on operating member.
- Installation Requirements:
- R001 R006 R010
- Model:
-
4K7001
4K7002
- Factor:
- Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way
Moss Ind Estate
St Helens Road
Postcode
WN7 3PT
Country
Leigh
View All Listings by this Company - Manufacturer:
- COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi
High Tech Zone
Guangdong
View All Listings by this Company
WRAS Approval Number: #2001005
Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 33500710 and 33505710 models are supplied with a pop-up waste.
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001005
- Expiry date:
- 31/01/2025
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided PEX lined flexible hose assemblies with 10mm spigot end connections.
- Marking:
- DORNBRACHT on body
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
33500710 single lever basin mixer with pop-up waste
33505710 single lever basin mixer with pop-up waste
33521710 single lever basin mixer without pop-up waste
33534710 single lever basin mixer without pop-up waste
- Factor:
- Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6
D-58640 Iserlohn
Germany
Phone
+49 2371 433 0
View All Listings by this Company
WRAS Approval Number: #2001016
Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. The BC574AA model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001016
- Expiry date:
- 31/01/2025
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided polyethylene lined flexible hose assemblies with ⅜” captive nut end connections.
- Marking:
- Ideal standard logo on operating member
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
BC573AA - TEMPO BASIN MIXER CHROME NO PUW
BC574AA - TEMPO BASIN MIXER CHROME PUW
- Factor:
- Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1)
Armitage,
Rugeley,
Staffordshire
Postcode
WS15 4BT
View All Listings by this Company
WRAS Approval Number: #2001020
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet incorporates a plastic aerator. The 33500985 model is supplied with a pop-up waste.
Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001020
- Expiry date:
- 31/01/2025
- Note:
- No testing performed on pop-up waste
- Size:
- Stainless steel braided PEX lined flexible hose assemblies with 10mm spigot end connections.
- Marking:
- DORNBRACHT On body
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
33500985 single lever basin mixer with pop up waste
33521985 single lever basin mixer without pop up waste
- Manufacturer:
- Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6
D-58640 Iserlohn
Germany
Phone
+49 2371 433 0
View All Listings by this Company
WRAS Approval Number: #2001029
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator.
Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001029
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections
- Marking:
- Manufacturer’s logo ‘Delai’ on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
4311,
5801,
1901,
2201H,
9001H.
- Manufacturer:
- Wenzhou Delai Sanitary Ware Co. Limited.
Company Name
Wenzhou Delai Sanitary Ware Co. Limited.
Address
HaiCheng
Longwan
Wenzhou
Country
Zhejiang
View All Listings by this Company
WRAS Approval Number: #2001041
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Both models are supplied with a click type pop-up waste, plastic flow regulators on each inlet and an alternative (loose) flow straightener.
Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001041
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- FRANCIS PEGLER (brand of Comap) on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
4K9001: Lamina Mono Basin Mixer Tap Including a Click Waste.
4K9002: Lamina Mini Mono Basin Mixer Tap Including a Click Waste.
- Factor:
- Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way
Moss Ind Estate
St Helens Road
Postcode
WN7 3PT
Country
Leigh
View All Listings by this Company - Manufacturer:
- COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi
High Tech Zone
Guangdong
View All Listings by this Company
WRAS Approval Number: #2001042
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), Incorporating a ceramic cartridge headwork and single lever operating member. Product is supplied with both an aerator and flow straightener. Product is also supplied with a click type waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001042
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- Comap on front of tap body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
922011
- Factor:
- Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way
Moss Ind Estate
St Helens Road
Postcode
WN7 3PT
Country
Leigh
View All Listings by this Company - Manufacturer:
- COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi
High Tech Zone
Guangdong
View All Listings by this Company
WRAS Approval Number: #2001307
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks and a single lever operating member.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001307
- Expiry date:
- 31/01/2025
- Size:
- PET braided TpSiv lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- VADO logo on body
- Installation Requirements:
- R001 R006 R009 R160
- Model:
-
TEF-100/SB-CP
- Manufacturer:
- Vado
Company Name
Vado
Address
Cheddar Business Park
Wedmore Road
Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466
View All Listings by this Company
WRAS Approval Number: #2001308
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001308
- Expiry date:
- 31/01/2025
- Size:
- PET braided TpSiv lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Vado logo on body.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
TE-100/SB-C/P
TE-100E/SB-C/P
PHO-100/SB-C/P
LIF-100/SB-C/P
LIF-200/SB-CP
Models added March 2021:
PHO-100FW/SB-CP
PHO-100F/SB-C/P
- Manufacturer:
- Vado
Company Name
Vado
Address
Cheddar Business Park
Wedmore Road
Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466
View All Listings by this Company
WRAS Approval Number: #2001319
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001319
- Expiry date:
- 31/01/2025
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- Deva (brand of Methven) on operating member.
DTC32A on body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
SOL004 - Sequential Mono Basin Mixer.
Model added September 2023
OSL004
- Factor:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2001906
Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener.
Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001906
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connections.
- Marking:
- Bristan logo on operating members
- Installation Requirements:
- R001 R006 R010
- Model:
-
VAL BAS C CD
Model added January 2021: VAL2 BAS C CD
- Factor:
- Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park
Pooley Hall Drive
Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com
View All Listings by this Company - Manufacturer:
- Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park
Pooley Hall Drive
Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com
View All Listings by this Company
WRAS Approval Number: #2001907
Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic flow straightener.
Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001907
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided PEX lined hose assemblies, incorporating a ½” captive nut end connection.
- Marking:
- Cascade logo on the operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
006.2119.3
003.2119.3
- Factor:
- Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park
Pooley Hall Drive
Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com
View All Listings by this Company
WRAS Approval Number: #2001354
Range of single hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes). Incorporating ceramic cartridge headworks, and single lever operating members.
The spout outlet incorporates a plastic aerator.
The 77959W-4A-** model is supplied with a pop-up waste.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001354
- Expiry date:
- 31/01/2025
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- Kohler on body.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
77958W-4AND-** - 35mm Single Control Lav
77959W-4A-** - 35mm Tall Single Control Lav with drain
77959W-4AND-** - 35mm Tall Single Control Lav
Where ** denotes finish and can be replaced with:
CP - Polished Chrome,
BN - Brushed Nickel,
SN - Polished Nickel,
BV - Brushed Bronze,
TT - Vibrant Titanium,
AF - French Gold,
2BZ - Oil Rubbed Bronze,
BL - Matt Black,
BLR - Black and Red; Man U. Edition.
- Manufacturer:
- Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road,
Cheltenham,
Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000
View All Listings by this Company
WRAS Approval Number: #2001360
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with a single lever operating member.
The spout outlet incorporates a plastic aerator.
The product is supplied with a pop-up waste and optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001360
- Expiry date:
- 31/01/2025
- Note:
- No testing has been performed on the pop-up waste.
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
- Marking:
- Gessi on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
Art.18601 VIA TORTONA
Art.18602 VIA TORTONA
- Manufacturer:
- Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio
13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
View All Listings by this Company
WRAS Approval Number: #2001915
Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener.
Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001915
- Expiry date:
- 31/01/2025
- Size:
- 15mm copper pipe
- Marking:
- Bristan on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
VAC BASNW C MT
- Factor:
- Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park
Pooley Hall Drive
Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com
View All Listings by this Company
WRAS Approval Number: #2001090
Single hole, single outlet (fixed) combination tap assembly (various finishes), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber aerator. Product is supplied with a lever type pop-up waste
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001090
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel PEX lined flexible hose with 3/8” BSP captive nut end connections
- Marking:
- AXOR on front of tap body
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
10 015 xxx
Available in customised finishes ‘xxx’ denotes the finish:
- 000 Chrome
- 020 PVD polished chrome
- 260 PVD Brushed chrome
- 830 PVD Polished nickel
- 820 PVD Brushed nickel
- 990 PVD Polished gold optic
- 250 PVD Brushed gold optic
- 300 PVD Polished red gold
- 310 PVD Brushed red gold
- 130 PVD Polished bronze
- 140 PVD Brushed bronze
- 330 PVD Polished black chrome
- 340 PVD Brushed Black chrome
- 930 PVD Polished brass
- 950 PVD Brushed brass
- 800 PVD stainless steel optic
- Manufacturer:
- Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9,
77761 Schiltach
Country
Germany
View All Listings by this Company
WRAS Approval Number: #2001921
Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener.
Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001921
- Expiry date:
- 31/01/2025
- Size:
- 15mm copper pipe
- Marking:
- SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
- Installation Requirements:
- R001 R006 R010
- Model:
-
C58108
- Factor:
- WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT
WARWICK TECHNOLOGY PARK
WARWICK
Postcode
CV34 6DY
View All Listings by this Company
WRAS Approval Number: #2001111
Pillar taps with chromium plated brass bodies, incorporating a ¼ turn ceramic disc headwork and single lever operating members.
The tap is supplied with a flow straightener and metal backnuts.
Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001111
- Expiry date:
- 31/01/2025
- Size:
- ½” BSP (M).
- Marking:
- INSTINCT (BRAND OF PHG) ON OPERATING MEMBER
- Installation Requirements:
- R001 R006
- Model:
-
4E1285 ELION DECK BATH FILLER
- Factor:
- Plumbing & Heating Group
Company Name
Plumbing & Heating Group
Address
C/O Tippers Builders Merchants,
Europa Way,
Lichfield
Postcode
WS14 9TZ
View All Listings by this Company
WRAS Approval Number: #2001114
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Both models are supplied with a click type pop-up waste, plastic flow regulators on each inlet and an alternative (loose) flow straightener.
Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001114
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- INSTINCT (BRAND OF PHG) ON OPERATING MEMBER
- Installation Requirements:
- R001 R006 R010
- Model:
-
4E1151 ESPADA MONO BASIN MIXER WITH CLICK WASTE & 4E1152 ESPADA MINI BASIN MIXER WITH CLICK WASTE
- Factor:
- Plumbing & Heating Group
Company Name
Plumbing & Heating Group
Address
C/O Tippers Builders Merchants,
Europa Way,
Lichfield
Postcode
WS14 9TZ
View All Listings by this Company
WRAS Approval Number: #2001115
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses.
These products are also supplied with a click type waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001115
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
- Marking:
- INSTINCT (BRAND OF PHG) ON OPERATING MEMBER
- Installation Requirements:
- R001 R006 R010
- Model:
-
4E1141 WATERFALL MONO BASIN WITH CLICK WASTE & 4E1142 WATERFALL MINI MONO BASIN WITH CLICK WASTE
- Factor:
- Plumbing & Heating Group
Company Name
Plumbing & Heating Group
Address
C/O Tippers Builders Merchants,
Europa Way,
Lichfield
Postcode
WS14 9TZ
View All Listings by this Company
WRAS Approval Number: #2001116
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses.
These products are also supplied with a click type waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001116
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
- Marking:
- esteem (Trademark of PHI) on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
E60066 VETTIS MONO BASIN MIXER WITH CLICK WASTE & E60067 VETTIS MINI MONO BASIN MIXER WITH CLICK WASTE
- Factor:
- Plumbing and Heating Ltd
Company Name
Plumbing and Heating Ltd
Address
The Whitehouse
Wilderspool Park
Greenalls Avenue
Postcode
WA4 6HL
Country
Stockton Heath
View All Listings by this Company
WRAS Approval Number: #2001118
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Both models are supplied with a click type pop-up waste, plastic flow regulators on each inlet and an alternative (loose) flow straightener.
Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001118
- Expiry date:
- 31/01/2025
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- esteem (Trademark of PHI) on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
E60071 KISDON MONO BASIN MIXER WITH CLICK WASTE & E60072 KISDON MINI MONO BASIN WITH CLICK WASTE
- Factor:
- Plumbing and Heating Ltd
Company Name
Plumbing and Heating Ltd
Address
The Whitehouse
Wilderspool Park
Greenalls Avenue
Postcode
WA4 6HL
Country
Stockton Heath
View All Listings by this Company
WRAS Approval Number: #2001079
Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Model B9868AA is supplied with a pop-up waste and a weighted chain.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2001079
- Expiry date:
- 31/01/2025
- Note:
- No testing preformed on the pop-up waste
- Size:
- Stainless steel braided EDPM lined hose assembly incorporating 15mm compression end connections
- Marking:
- ISI on rear of tap body +
Armitage Shanks on operating member screw caps
- Installation Requirements:
- R001 R006 R010
- Model:
-
B9867AA Sandringham 21
B9868AA Sandringham 21
B9869AA Sandringham 21
- Factor:
- Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1),
Armitage,
Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781
View All Listings by this Company
Back To Directory Sections Page 2 of 12