Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251214302

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless steel braided, EPDM lined inlet hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
147013 X XXX	VARIOUS	1/2" BSP	10.0 bar	65 °C	PPI	REAR OF BODY	No	Non-rising spindle	C-plate	Aerator & Flow Straightener

Notes & Further Information: X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Cross Top type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD

WRAS Approval Number: #260103302

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck mounted Stainless steel braided EPDM lined Inlet Hoses. Supplied with a 15mm compression isolation valves that incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection). Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
QST SNK EF C	Chrome	½” captive nut end connections.	5.0 bar	60 °C	Bristan	Body	No	1/2 Turn ceramic disk	C-plate	Flow Straightener
DUL SNK EF C	Chrome	½” captive nut end connections.	5.0 bar	60 °C	Bristan	Body	No	1/2 Turn ceramic disk	C-plate	Flow Straightener
RP3 DUL SNK EF C	Chrome	½” captive nut end connections.	5.0 bar	60 °C	Bristan	Body	No	1/2 Turn ceramic disc	C-plate	Flow Straightener

Notes & Further Information: Model added February 2026: RP3 DUL SNK EF C

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company
Manufacturers:: PPI Xiamen Industry Co Ltd

WRAS Approval Number: #250803301

Section:: 0480 Combination Tap Assemblies
Description:: A Single hole tap(s) with a double outlet and a fixed spout.
Deck Mounted. Stainless steel braided EPDM lined inlet hoses. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006
Expiry date:: 31/08/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes	Includes
VAC DFBAS C MT	Chrome	G 1/2	5.0 bar	60 °C	Bristan	Handle	No	Non-rising spindle	C-plate	Open Outlet	Pop Up

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #250715303

Section:: 0650 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Stainless steel braided EPDM lined inter-connecting hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
HD15	Chrome	BSP 3/4" (M)	10 bar	60 °C	Brand logo	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Interconnecting Hoses,
HD15K	Matte Black	BSP 3/4" (M)	10 bar	60 °C	Brand logo	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Interconnecting Hoses,
HD15BB PVD	Zirconium gold brushed topcoat	BSP 3/4" (M)	10 bar	60 °C	Brand logo	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Interconnecting Hoses,
HD15BV	Brushed gold matte topcoat	BSP 3/4" (M)	10 bar	60 °C	Brand logo	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Interconnecting Hoses,
HD15MG	Gun gray brushed	BSP 3/4" (M)	10 bar	60 °C	Brand logo	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Interconnecting Hoses,
HD15CA	Rose gold brushed	BSP 3/4" (M)	10 bar	60 °C	Brand logo	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Interconnecting Hoses,
HD15BN	Nickel brushed	BSP 3/4" (M)	10 bar	60 °C	Brand logo	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Interconnecting Hoses,

Notes & Further Information: These models only different in surface treatment

Approval Holder:: ALFRED VICTORIA LIMITED

Company Name
ALFRED VICTORIA LIMITED
Postcode
B45 9AL
Country
United Kingdom
Phone
00441213592214
General Email
daisy.qin@alfredvictoria.co.uk

View All Listings by this Company
Manufacturers:: TAIZHOU LANBIAO SANITARY WARE CO., LTD

WRAS Approval Number: #250703306

Section:: 0650 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of achieving AUK3 Tap Gap Stainless-steel braided EPDM lined connection hoses
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
AL 3TH BAS C	Chrome	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
AL 3TH BAS BLK	Black	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
AL 3TH BAS BB	Brushed Brass	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
CRU 3TH BAS C	Chrome	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
CRU 3TH BAS BLK	Black	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
CRU 3TH BAS BB	Brushed Brass	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
313941	Chrome	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
313942	Black	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,
313943	Brushed Brass	G 1/2" Male	5 bar	65 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #250702705

Expansion vessel with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1000 Expansion Vessels
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾" BSP (M).
Marking:: Aquasystem logo (brand of Zilio Industries SpA) and other technical information on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: AR2

Approval Holder:: Zilio Industries SPA

Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552
General Email
info@zilioindustries.com

View All Listings by this Company

WRAS Approval Number: #250602714

Range of filter shower handsets and tap outlets with plastic bodies with EPDM O-Rings Open Outlet use. Maximum operating temperature 60°C

Section:: 1050 Filters and Housings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Aquatools logo, Model and other information on adhesive label on body
Installation Requirements:: R001 R150 R170
Expiry date:: 30/06/2030
Model:: 1/2" BSP (M) AT030711CP, AT030723CP, AT030713CP, AT030715CP, AT030714CP, AT030724CP, AT030725CP Ø10.9 AT030717CP, AT030727CP, AT030719CP, AT030721CP, AT030729CP, AT030747CP, AT030730CP, AT030718CP, AT030728CP, AT030720CP, AT030722CP, AT030739CP, AT030748CP, AT030740CP, AT030767CP, AT030768CP, AT030741CP, AT030742CP

Manufacturer:: AQUATOOLS HYGIENE LTD

Company Name
AQUATOOLS HYGIENE LTD
Address
1-3 Henderson house Hithercroft Road Wallingford Oxfordshire OX10 9DG

View All Listings by this Company

WRAS Approval Number: #250615009

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).
Marking:: Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-67: 66.7. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351025: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 66.7×35. GM5011-6754: 66.7×54. GM5011-7654: 76.1×54. GM5011-8954: 88.9×54. GM5011-8976: 88.9×76.1. GM5011-10854: 108×54. GM5011-10876: 108×76.1. GM5011-10889: 108×88.9. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-67: 66.7. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Approval Holder:: WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name
WENZHOU KASIN VALVE PIPE FITTING CO., LTD
Address
NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #250604019

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604019
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: GD Press, size, 304L, model number on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:: Grande-tek Flow Control Co., Ltd

Company Name
Grande-tek Flow Control Co., Ltd
Address
Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei
Postcode
061000
Country
China

View All Listings by this Company

WRAS Approval Number: #2304380

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with MONFLEX PEXB/AL/PEXB MULTILAYER PIPES. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2304380
Size:: 16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).
Marking:: Fitting: Ebrille & size Pipe: Ebrille and product info on pipe.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: EBRILLE 'U' FITTINGS Straight: REM16X16 REM18X18 REM20X20 REM25X25 REM32X32 Reduced straight: REMR20X16 REMR20X18 REMR25X16 REMR25X18 REMR25X20 REMR26X16 REMR26X18 REMR26X20 REMR32X16 REMR32X18 REMR32X20 REMR32X25 REMR32X26 Male straight: REDFM16X1/2 REDFM16X3/4 REDFM18X1/2 REDFM20X1/2 REDFM20X1 REDFM25X1/2 REDFM25X3/4 REDFM25X1 REDFM26X1/2 REDFM26X3/4 REDFM26X1 REDFM32X1/2 REDFM32X3/4 REDFM32X1 REDFM32X11/4 REDFM32X11/2 Female straight: REDFF16X1/2 REDFF16X3/4 REDFF16X1 REDFF18X1/2 REDFF18X3/4 REDFF20X1/2 REDFF20X3/4 REDFF20X1 REDFF25X1/2 REDFF25X3/4 REDFF25X1 REDFF26X1/2 REDFF26X3/4 REDFF26X1 REDFF32X1/2 REDFF32X3/4 REDFF32X1 REDFF32X11/4 REDFF32X11/2 Elbow: RE90°16X16 RE90°18X18 RE90°20X20 RE90°25X25 RE90°26X26 RE90°32X32 Male elbow: RE90°FM16X1/2 RE90°FM16X3/4 RE90°FM18X1/2 RE90°FM18X3/4 RE90°FM20X1/2 RE90°FM20X3/4 RE90°FM20X1 RE90°FM25X1/2 RE90°FM25X3/4 RE90°FM25X1 RE90°FM26X1/2 RE90°FM26X3/4 RE90°FM26X1 RE90°FM32X1/2 RE90°FM32X3/4 RE90°FM32X1 RE90°FM32X11/4 Female elbow: RE90°FF16X1/2 RE90°FF16X3/4 RE90°FF18X1/2 RE90°FF18X3/4 RE90°FF20X1/2 RE90°FF20X3/4 RE90°FF20X1 RE90°FF25X1/2 RE90°FF25X3/4 RE90°FF25X1 RE90°FF26X1/2 RE90°FF26X3/4 RE90°FF26X1 RE90°FF32X1/2 RE90°FF32X3/4 RE90°FF32X1 RE90°FF32X1 1/4 Wall plated elbow: RE90°M16X1/2 RE90°M16X3/4 RE90°M18X1/2 RE90°M20X1/2 RE90°M20X3/4 Tee: RET16X16X16 RET18X18X18 RET20X20X20 RET25X25X25 RET26X26X26 RET32X32X32 Reduced tee: RETR16X20X16 RETR16X25X16 RETR16X26X16 RETR18X16X18 RETR18X20X18 RETR18X25X18 RETR18X26X18 RETR20X16X20 RETR20X18X20 RETR20X25X20 RETR25X16X25 RETR25X16X16 RETR26X16X16 RETR25X18X25 RETR25X20X25 RETR25X32X25 RETR20X26X20 RETR26X16X26 RETR26X18X26 RETR26X20X26 RETR26X32X26 RETR32X16X32 RETR32X18X32 RETR32X20X32 RETR32X25X32 RETR25X16X20 RETR32X20X25 RETR26X16X20 RETR32X20X26 RETR20X16X16 RETR20X20X16 RETR25X25X18 RETR25X25X20 RETR25X18X18 RETR25X20X20 RETR25X16X20 RETR32X20X25 RETR26X26X16 RETR26X26X18 RETR26X26X20 RETR26X18X18 RETR26X20X20 RETR26X20X16 RETR32X20X26 RETR32X32X16 RETR32X32X20 RETR32X32X26 RETR32X25X25 RETR32X26X26 RETR32X26X32 Male tee: RETFM16X1/2X16 RETFM16X3/4X16 RETFM20X1/2X20 RETFM20X3/4X20 Female tee: RETFF16X1/2X16 RETFF16X3/4X16 RETFF18X1/2X18 RETFF18X3/4X18 RETFF20X1/2X20 RETFF20X3/4X20 RETFF20X1X20 RETFF25X1/2X25 RETFF25X3/4X25 RETFF25X1X25 RETFF26X1X26 RETFF26X3/4X26 RETFF26X1X26 RETTFF32X1/2X32 RETFF32X3/4X32 RETFF32X1X32 RETFF32X11/4X32 Cap: REC16 REC18 REC20 REC25 REC26 REC32 Female union: REDFFL16X1/2 REDFFL16X3/4 REDFFL20X1/2 REDFFL20X3/4 REDFFL25X1/2 REDFFL25X3/4 REDFFL25X1 REDFFL26X1/2 REDFFL26X3/4 REDFFL26X1 REDFFL32X1 TO BE USED WITH MONOFLEX PEXB/ALPEXB MULTILAYER PIPES: MZ16X2MONFLEXMT100 MZ16X2MONFLEXMT200 MZ16X2MONFLEXMT400 MZ18X2MONFLEXMT100 MZ20X2MONFLEXMT100 MZ20X2MONFLEXMT200 MZ20X2MONFLEXMT400 MZ25X2,5MONFLEXMT100 MZ26X3MONFLEXMT100 MZ32X3MONFLEXMT100

Approval Holder:: Ebrille s.r.l.

Company Name
Ebrille s.r.l.
Address
Administration and Esablishment, Straded Canelli, 53A - 14049 Nizza Monferrato AT
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2303405

Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303405
Size:: see model
Marking:: BECLI Logo, size & material on pipe and fitting body.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: Male threaded coupler: S15х1/2"W: 15 x ½” BSP (M), S15х3/4"W: 15 x ¾” BSP (M), S18х1/2"W: 18 x ½” BSP (M), S18х3/4"W: 18 x ¾” BSP (M), S22х1/2"W: 22 x ½” BSP (M), S22х3/4"W: 22 x ¾” BSP (M), S22х1"W: 22 x 1” BSP (M), S28х3/4"W: 28 x ¾” BSP (M), S28x1"W: 28 x 1” BSP (M), S35x1"W: 35 x 1” BSP (M), S35x1 1/4"W: 35 x 1¼” BSP (M), S42х1 1/2"W: 42 x 1½” BSP (M), S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: 15х1/2"W: 15 x ½” BSP (M), 15x3/4"W: 15 x ¾” BSP (M), 18х1/2"W: 18 x ½” BSP (M), 18х3/4"W: 18 x ¾” BSP (M), 18x1"W: 18 x 1” BSP (M), 22х1/2"W: 22 x ½” BSP (M), 22х3/4"W: 22 x ¾” BSP (M), 22x1"W: 22 x 1” BSP (M), 28х3/4"W: 28 x ¾” BSP (M), 28х1"W: 28 x 1” BSP (M), 35х1 1/4"W: 35 x 1¼” BSP (M), 42х1 1/2"W: 42 x 1½” BSP (M), 54х2"W: 54 x 2” BSP (M). Female threaded coupler: S15х1/2"N: 15 x ½” BSP (F), S18х1/2"N: 18 x ½” BSP (F), S18х3/4"N: 18 x ¾” BSP (F), S22х1/2"N: 22 x ½” BSP (F), S22х3/4"N: 22 x ¾” BSP (F), S28х3/4"N: 28 x ¾” BSP (F), S28х1"N: 28 x 1” BSP (F), S35x1"N: 35 x 1” BSP (F), S35x1 1/4"N: 35 x 1¼” BSP (F), S42х1 1/2"N: 42 x 1½” BSP (F), S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: 15х1/2"N: 15 x ½” BSP (F), 15x3/4"N: 15 x ¾” BSP (F), 18х1/2"N: 18 x ½” BSP (F), 18х3/4"N: 18 x ¾” BSP (F), 18x1"N: 18 x 1” BSP (F), 22х1/2"N: 22 x ½” BSP (F), 22х3/4"N: 22 x ¾” BSP (F), 22x1"N: 22 x 1” BSP (F), 28х3/4"N: 28 x ¾” BSP (F), 28х1"N: 28 x 1” BSP (F), 35х1 1/4"N: 35 x 1¼” BSP (F), 42х1 1/2"N: 42 x 1½” BSP (F), 54х2"N: 54 x 2” BSP (F). Coupler: S15: 15 x 15mm, S18х15: 18 x 15mm, S18: 18 x 18mm, S22х18: 22 x 18mm, S22х15: 22 x 15mm, S22: 22 x 22mm, S28х15: 28 x 15mm, S28х22: 28 x 22mm, S28: 28 x 28mm, S35х28: 35 x 28mm, S35: 35 x 35mm, S42х35: 42 x 35mm, S42: 42 x 42mm, S54х42: 54 x 42mm, S54: 54 x 54mm. Coupler with straight pipe: S18х15Ⅱ: 18 x 15mm, S22х15Ⅱ: 22 x 15mm, S22х18Ⅱ: 22 x 18mm, S28х15Ⅱ: 28 x 15mm, S28х18Ⅱ: 28 x 18mm, S28х22Ⅱ: 28 x 22mm, S35х15Ⅱ: 35 x 15mm, S35х18Ⅱ: 35 x 18mm, S35х22Ⅱ: 35 x 22mm, S35х28Ⅱ: 35 x 28mm, S42х22Ⅱ: 42 x 22mm, S42х28Ⅱ: 42 x 28mm, S42х35Ⅱ: 42 x 35mm, S54х28Ⅱ: 54 x 28mm, S54х35Ⅱ: 54 x 35mm, S54х42Ⅱ: 54 x 42mm. Adjustable connector: S15Ⅱ: 15 x 15mm, S18Ⅱ: 18 x 18mm, S22Ⅱ: 22 x 22mm, S28Ⅱ: 28 x 28mm, S35Ⅱ: 35 x 35mm, S42Ⅱ: 42 x 42mm, S54Ⅱ: 54 x 54mm. Union: H15х1/2": 15 x ½” captive nut, H15х3/4": 15 x ¾” captive nut, H18х1/2": 18 x ½” captive nut, H18х3/4": 18 x ¾” captive nut, H22х1/2": 22 x ½” captive nut, H22х3/4": 22 x ¾” captive nut, H28х3/4": 28 x ¾” captive nut, H28х1": 28 x 1” captive nut, H35x1": 35 x 1” captive nut, H35x1 1/4": 35 x 1¼” captive nut, H42х1 1/2": 42 x 1½” captive nut, H54х2": 54 x 2” captive nut. Tee: T15: 15 x 15 x 15mm, T18х15х18: 18 x 15 x 18mm, T18: 18 x 18 x 18mm, T22х18х22: 22 x 18 x 22mm, T22х15х22: 22 x 15 x 22mm, T22: 22 x 22 x 22mm, T28x15x28: 28 x 15 x 28mm, T28х22х22: 28 x 22 x 22mm, T28x22x28: 28 x 22 x 28mm, T28: 28 x 28 x 28mm, T35x15x35: 35 x 15 x 35mm, T35x22x35: 35 x 22 x 35mm, T35x28x35: 35 x 28 x 35mm, T35: 35 x 35 x 35mm, T42х35х42: 42 x 35 x 42mm, T42: 42 x 42 x 42mm, T54х42х54: 54 x 42 x 54mm, T54: 54 x 54 x 54mm. Female threaded Tee: T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm, T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm, T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm, T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm, T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm, T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm, T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm, T28х1"Nx28: 28 x 1” BSP (F) x 28mm, T35х1"Nx35: 35 x 1” BSP (F) x 35mm, T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm, T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm, T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm, T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm, T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm, T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm, T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm, T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm, T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm, T28х1"Wx28: 28 x 1” BSP (M) x 28mm, T35х1"Wx35: 35 x 1” BSP (M) x 35mm, T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm, T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm, T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: L15a: 15 x 15mm, L18а: 18 x 18mm, L22a: 22 x 22mm, L28a: 28 x 28mm, L35a: 35 x 35mm, L42а: 42 x 42mm, L54а: 54 x 54mm. 90°A Elbow: L15: 15 x 15mm, L18: 18 x 18mm, L22: 22 x 22mm, L28: 28 x 28mm, L35: 35 x 35mm, L42: 42 x 42mm, L54: 54 x 54mm. Female threaded elbow: L15х1/2"N: 15 x ½” BSP (F), L18х1/2"N: 18 x ½” BSP (F), L18х3/4"N: 18 x ¾” BSP (F), L22х1/2"N: 22 x ½” BSP (F), L22х3/4"N: 22 x ¾” BSP (F), L28х3/4"N: 28 x ¾” BSP (F), L35х1"N: 35 x 1” BSP (F). Male threaded elbow: L15x1/2"W: 15 x ½” BSP (M), L18х1/2"W: 18 x ½” BSP (M), L18х3/4"W: 18 x ¾” BSP (M), L22x1/2"W: 22 x ½” BSP (M), L22x3/4"W: 22 x ¾” BSP (M), L28x3/4"W: 28 x ¾” BSP (M), L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: L15х1/2"N(a): 15 x ½” BSP (F), L18х1/2"N(a): 18 x ½” BSP (F), L22х1/2"N(a): 22 x ½” BSP (F), L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: 45°L15a: 15 x 15mm, 45°L18а: 18 x 18mm, 45°L22a: 22 x 22mm, 45°L28a: 28 x 28mm, 45°L35a: 35 x 35mm, 45°L42а: 42 x 42mm, 45°L54а: 54 x 54mm. 45°A Elbow: 45°L15: 15 x 15mm, 45°L18: 18 x 18mm, 45°L22: 22 x 22mm, 45°L28: 28 x 28mm, 45°L35: 35 x 35mm, 45°L42: 42 x 42mm, 45°L54: 54 x 54mm. One end pipe bridge: Ω15a: 15 x 15mm, Ω18a: 18 x 18mm, Ω22a: 22 x 22mm. Pipe Bridge: Ω15: 15 x 15mm, Ω18: 18 x 18mm, Ω22: 22 x 22mm, Ω28: 28 x 28mm. Cap: D15: 15 x 15mm, D18: 18 x 18mm, D22: 22 x 22mm, D28: 28 x 28mm, D35: 35 x 35mm, D42: 42 x 42mm, D54: 54 x 54mm. Pipe: Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm.

Approval Holder:: Eduardo Alvarez LDA

Company Name
Eduardo Alvarez LDA
Address
Rua Central N. 24 Cabecas 2300-317 Tomar
Country
Portugal
Phone
0035 1919414508
General Email
trading.ealvarez@gmail.com

View All Listings by this Company

WRAS Approval Number: #240404075

Range of press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404075
Size:: For size see models
Marking:: Valtren logo 'indi', size, WRAS and date of manufacture (mm/yy) on body
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: STRAIGHT COUPLING CxC: 60111515 60112222 60112828 60113535 60114242 60115454 SLIP COUPLING C x C: 60171515 60172222 60172828 60173535 60174242 60175454 REDUCING COUPLING C x C: 60112215 60112815 60112822 60113515 60113522 60113528 60114215 60114222 60114228 60114235 60115415 60115422 60115428 60115435 60115442 FITTING REDUCER F x C: 60132215 60132815 60132822 60133515 60133522 60133528 60134215 60134222 60134228 60134235 60135415 60135422 60135428 60135435 60135442 90DEG ELBOW C x C: 60411515 60412222 60412828 60413535 60414242 60415454 90DEG STREET ELBOW F x C: 60431515 60432222 60432828 60433535 60434242 60435454 45DEG ELBOW C x C: 60451515 60452222 60452828 60453535 60454242 60455454 45DEG STREET ELBOW F x C: 60481515 60482222 60482828 60483535 60484242 60485454 CAP C x C: 60811515 60812222 60812828 60813535 60814242 60815454 EQUAL TEE C x C: 60151515 60222222 60282828 60353535 60424242 60545454 PART CROSSOVER F x C: 60271515 - 15mm 60272222 - 22mm CROSSOVER C x C: 60291515 - 15mm 60292222 - 22mm REDUCER ELBOW 60412215 - 22mm x 15mm REDUCING TEE: 60221515 60221522 60282222 60282228 60222215 60282815 60282822 60353515 60353522 60353528 60424215 60424222 60424228 60424235 60545415 60545422 60545428 60545435 60545442

Approval Holder:: Valtren Distribution Ltd

Company Name
Valtren Distribution Ltd
Address
10 Aylesbury Court Lapworth
Postcode
B94 6BE
Country
United Kingdom
General Email
07771 755057

View All Listings by this Company

WRAS Approval Number: #2303406

Hyddro Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Hyddro stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303406
Size:: see model
Marking:: Hyddro by GFS, size & material on pipe and fitting body.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: Male threaded coupler: HYD-SS-MC-01 S15х1/2"W: 15 x ½” BSP (M) HYD-SS-MC-02 S15х3/4"W: 15 x ¾” BSP (M) HYD-SS-MC-03 S18х1/2"W: 18 x ½” BSP (M) HYD-SS-MC-04 S18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MC-05 S22х1/2"W: 22 x ½” BSP (M) HYD-SS-MC-06 S22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MC-07 S22х1"W: 22 x 1” BSP (M) HYD-SS-MC-08 S28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MC-09 S28x1"W: 28 x 1” BSP (M) HYD-SS-MC-10 S35x1"W: 35 x 1” BSP (M) HYD-SS-MC-11 S35x1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MC-12 S42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MC-13 S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: HYD-SS-MP-01 15х1/2"W: 15 x ½” BSP (M) HYD-SS-MP-02 15x3/4"W: 15 x ¾” BSP (M) HYD-SS-MP-03 18х1/2"W: 18 x ½” BSP (M) HYD-SS-MP-04 18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MP-05 18x1"W: 18 x 1” BSP (M) HYD-SS-MP-06 22х1/2"W: 22 x ½” BSP (M) HYD-SS-MP-07 22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MP-08 22x1"W: 22 x 1” BSP (M) HYD-SS-MP-09 28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MP-10 28х1"W: 28 x 1” BSP (M) HYD-SS-MP-11 35х1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MP-12 42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MP-13 54х2"W: 54 x 2” BSP (M). Female threaded coupler: HYD-SS-FC-01 S15х1/2"N: 15 x ½” BSP (F) HYD-SS-FC-02 S18х1/2"N: 18 x ½” BSP (F) HYD-SS-FC-03 S18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FC-04 S22х1/2"N: 22 x ½” BSP (F) HYD-SS-FC-05 S22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FC-06 S28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FC-07 S28х1"N: 28 x 1” BSP (F) HYD-SS-FC-08 S35x1"N: 35 x 1” BSP (F) HYD-SS-FC-09 S35x1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FC-10 S42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FC-11 S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: HYD-SS-FP-01 15х1/2"N: 15 x ½” BSP (F) HYD-SS-FP-02 15x3/4"N: 15 x ¾” BSP (F) HYD-SS-FP-03 18х1/2"N: 18 x ½” BSP (F) HYD-SS-FP-04 18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FP-05 18x1"N: 18 x 1” BSP (F) HYD-SS-FP-06 22х1/2"N: 22 x ½” BSP (F) HYD-SS-FP-07 22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FP-08 22x1"N: 22 x 1” BSP (F) HYD-SS-FP-09 28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FP-10 28х1"N: 28 x 1” BSP (F) HYD-SS-FP-11 35х1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FP-12 42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FP-13 54х2"N: 54 x 2” BSP (F). Coupler: HYD-SS-CP-01 S15: 15 x 15mm HYD-SS-CP-02 S18х15: 18 x 15mm HYD-SS-CP-03 S18: 18 x 18mm HYD-SS-CP-04 S22х18: 22 x 18mm HYD-SS-CP-05 S22х15: 22 x 15mm HYD-SS-CP-06 S22: 22 x 22mm HYD-SS-CP-07 S28х15: 28 x 15mm HYD-SS-CP-08 S28х22: 28 x 22mm HYD-SS-CP-09 S28: 28 x 28mm HYD-SS-CP-10 S35х28: 35 x 28mm HYD-SS-CP-11 S35: 35 x 35mm HYD-SS-CP-12 S42х35: 42 x 35mm HYD-SS-CP-13 S42: 42 x 42mm HYD-SS-CP-14 S54х42: 54 x 42mm HYD-SS-CP-15 S54: 54 x 54mm. Coupler with straight pipe: HYD-SS-SP-01 S18х15Ⅱ: 18 x 15mm HYD-SS-SP-02 S22х15Ⅱ: 22 x 15mm HYD-SS-SP-03 S22х18Ⅱ: 22 x 18mm HYD-SS-SP-04 S28х15Ⅱ: 28 x 15mm HYD-SS-SP-05 S28х18Ⅱ: 28 x 18mm HYD-SS-SP-06 S28х22Ⅱ: 28 x 22mm HYD-SS-SP-07 S35х15Ⅱ: 35 x 15mm HYD-SS-SP-08 S35х18Ⅱ: 35 x 18mm HYD-SS-SP-09 S35х22Ⅱ: 35 x 22mm HYD-SS-SP-10 S35х28Ⅱ: 35 x 28mm HYD-SS-SP-11 S42х22Ⅱ: 42 x 22mm HYD-SS-SP-12 S42х28Ⅱ: 42 x 28mm HYD-SS-SP-13 S42х35Ⅱ: 42 x 35mm HYD-SS-SP-14 S54х28Ⅱ: 54 x 28mm HYD-SS-SP-15 S54х35Ⅱ: 54 x 35mm HYD-SS-SP-16 S54х42Ⅱ: 54 x 42mm. Adjustable connector: HYD-SS-AC-01 S15Ⅱ: 15 x 15mm HYD-SS-AC-02 S18Ⅱ: 18 x 18mm HYD-SS-AC-03 S22Ⅱ: 22 x 22mm HYD-SS-AC-04 S28Ⅱ: 28 x 28mm HYD-SS-AC-05 S35Ⅱ: 35 x 35mm HYD-SS-AC-06 S42Ⅱ: 42 x 42mm HYD-SS-AC-07 S54Ⅱ: 54 x 54mm. Union: HYD-SS-UN-01 H15х1/2": 15 x ½” captive nut HYD-SS-UN-02 H15х3/4": 15 x ¾” captive nut HYD-SS-UN-03 H18х1/2": 18 x ½” captive nut HYD-SS-UN-04 H18х3/4": 18 x ¾” captive nut HYD-SS-UN-05 H22х1/2": 22 x ½” captive nut HYD-SS-UN-06 H22х3/4": 22 x ¾” captive nut HYD-SS-UN-07 H28х3/4": 28 x ¾” captive nut HYD-SS-UN-08 H28х1": 28 x 1” captive nut HYD-SS-UN-09 H35x1": 35 x 1” captive nut HYD-SS-UN-10 H35x1 1/4": 35 x 1¼” captive nut HYD-SS-UN-11 H42х1 1/2": 42 x 1½” captive nut HYD-SS-UN-12 H54х2": 54 x 2” captive nut Tee: HYD-SS-TE-01 T15: 15 x 15 x 15mm HYD-SS-TE-02 T18х15х18: 18 x 15 x 18mm HYD-SS-TE-03 T18: 18 x 18 x 18mm HYD-SS-TE-04 T22х18х22: 22 x 18 x 22mm HYD-SS-TE-05 T22х15х22: 22 x 15 x 22mm HYD-SS-TE-06 T22: 22 x 22 x 22mm HYD-SS-TE-07 T28x15x28: 28 x 15 x 28mm HYD-SS-TE-08 T28х22х22: 28 x 22 x 22mm HYD-SS-TE-09 T28x22x28: 28 x 22 x 28mm HYD-SS-TE-10 T28: 28 x 28 x 28mm HYD-SS-TE-11 T35x15x35: 35 x 15 x 35mm HYD-SS-TE-12 T35x22x35: 35 x 22 x 35mm HYD-SS-TE-13 T35x28x35: 35 x 28 x 35mm HYD-SS-TE-14 T35: 35 x 35 x 35mm HYD-SS-TE-15 T42х35х42: 42 x 35 x 42mm HYD-SS-TE-16 T42: 42 x 42 x 42mm HYD-SS-TE-17 T54х42х54: 54 x 42 x 54mm HYD-SS-TE-18 T54: 54 x 54 x 54mm. Female threaded Tee: HYD-SS-FT-01 T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm HYD-SS-FT-02 T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm HYD-SS-FT-03 T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm HYD-SS-FT-04 T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm HYD-SS-FT-05 T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm HYD-SS-FT-06 T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm HYD-SS-FT-07 T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm HYD-SS-FT-08 T28х1"Nx28: 28 x 1” BSP (F) x 28mm HYD-SS-FT-09 T35х1"Nx35: 35 x 1” BSP (F) x 35mm HYD-SS-FT-10 T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm HYD-SS-FT-11 T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm HYD-SS-FT-12 T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: HYD-SS-MT-01 T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm HYD-SS-MT-02 T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm HYD-SS-MT-03 T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm HYD-SS-MT-04 T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm HYD-SS-MT-05 T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm HYD-SS-MT-06 T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm HYD-SS-MT-07 T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm HYD-SS-MT-08 T28х1"Wx28: 28 x 1” BSP (M) x 28mm HYD-SS-MT-09 T35х1"Wx35: 35 x 1” BSP (M) x 35mm HYD-SS-MT-10 T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm HYD-SS-MT-11 T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm HYD-SS-MT-12 T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: HYD-SS-BE-01 L15a: 15 x 15mm HYD-SS-BE-02 L18а: 18 x 18mm HYD-SS-BE-03 L22a: 22 x 22mm HYD-SS-BE-04 L28a: 28 x 28mm HYD-SS-BE-05 L35a: 35 x 35mm HYD-SS-BE-06 L42а: 42 x 42mm HYD-SS-BE-07 L54а: 54 x 54mm. 90°A Elbow: HYD-SS-AE-01 L15: 15 x 15mm, HYD-SS-AE-02 L18: 18 x 18mm HYD-SS-AE-03 L22: 22 x 22mm HYD-SS-AE-04 L28: 28 x 28mm HYD-SS-AE-05 L35: 35 x 35mm HYD-SS-AE-06 L42: 42 x 42mm HYD-SS-AE-07 L54: 54 x 54mm. Female threaded elbow: HYD-SS-FE-01 L15х1/2"N: 15 x ½” BSP (F) HYD-SS-FE-02 L18х1/2"N: 18 x ½” BSP (F) HYD-SS-FE-03 L18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FE-04 L22х1/2"N: 22 x ½” BSP (F) HYD-SS-FE-05 L22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FE-06 L28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FE-07 L35х1"N: 35 x 1” BSP (F). Male threaded elbow: HYD-SS-ME-01 L15x1/2"W: 15 x ½” BSP (M) HYD-SS-ME-02 L18х1/2"W: 18 x ½” BSP (M) HYD-SS-ME-03 L18х3/4"W: 18 x ¾” BSP (M) HYD-SS-ME-04 L22x1/2"W: 22 x ½” BSP (M) HYD-SS-ME-05 L22x3/4"W: 22 x ¾” BSP (M) HYD-SS-ME-06 L28x3/4"W: 28 x ¾” BSP (M) HYD-SS-ME-07 L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: HYD-SS-FB-01 L15х1/2"N(a): 15 x ½” BSP (F) HYD-SS-FB-02 L18х1/2"N(a): 18 x ½” BSP (F) HYD-SS-FB-03 L22х1/2"N(a): 22 x ½” BSP (F) HYD-SS-FB-04 L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: HYD-SS-OBE-01 45°L15a: 15 x 15mm HYD-SS-OBE-02 45°L18а: 18 x 18mm HYD-SS-OBE-03 45°L22a: 22 x 22mm HYD-SS-OBE-04 45°L28a: 28 x 28mm HYD-SS-OBE-05 45°L35a: 35 x 35mm HYD-SS-OBE-06 45°L42а: 42 x 42mm HYD-SS-OBE-07 45°L54а: 54 x 54mm. 45°A Elbow: HYD-SS-OAE-01 45°L15: 15 x 15mm HYD-SS-OAE-02 45°L18: 18 x 18mm HYD-SS-OAE-03 45°L22: 22 x 22mm HYD-SS-OAE-04 45°L28: 28 x 28mm HYD-SS-OAE-05 45°L35: 35 x 35mm HYD-SS-OAE-06 45°L42: 42 x 42mm HYD-SS-OAE-07 45°L54: 54 x 54mm One end pipe bridge: HYD-SS-PCO-01 Ω15a: 15 x 15mm HYD-SS-PCO-02 Ω18a: 18 x 18mm HYD-SS-PCO-03 Ω22a: 22 x 22mm Pipe Bridge: HYD-SS-FCO-01 Ω15: 15 x 15mm HYD-SS-FCO-02 Ω18: 18 x 18mm HYD-SS-FCO-03 Ω22: 22 x 22mm HYD-SS-FCO-04 Ω28: 28 x 28mm. Cap: HYD-SS-CAP-01 D15: 15 x 15mm HYD-SS-CAP-02 D18: 18 x 18mm HYD-SS-CAP-03 D22: 22 x 22mm HYD-SS-CAP-04 D28: 28 x 28mm HYD-SS-CAP-05 D35: 35 x 35mm HYD-SS-CAP-06 D42: 42 x 42mm HYD-SS-CAP-07 D54: 54 x 54mm Pipe: HYD-SS-PI-15 15mm HYD-SS-PI-22 22mm HYD-SS-PI-28 28mm HYD-SS-PI-35 35mm HYD-SS-PI-42 42mm HYD-SS-PI-54 54mm

Approval Holder:: Merchant Supplies Distribution Ltd

Company Name
Merchant Supplies Distribution Ltd
Address
Unit 2 Merlin Centre Acrewood Way St. Albans
Postcode
AL4 OJY
Phone
0203 915 2557
General Email
murat@gfsflex.com

View All Listings by this Company

WRAS Approval Number: #2304382

Range of Hyddro press fittings incorporating EPDM ‘O’-rings. For use with Hyddro (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2304382
Size:: 16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).
Marking:: Hyddro by GFS and WRAS on fitting. Hyddro by GFS, WRAS, size and product info on pipe.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: Straight: HYD-ST-0101 U (S1216) - 16mm HYD-ST-0102 U (S1418) - 18mm HYD-ST-0103 U (S1620) - 20mm HYD-ST-0104 U (S2025) - 25mm HYD-ST-0109 U (S2026) - 26mm HYD-ST-0105 U (S2632) - 32mm Reduced straight: HYD-RS-0202U (S20*16) 20x16mm HYD-RS-0203 U (S20*18) 20x18mm HYD-RS-0204 U (S25*16) 25x16mm HYD-RS-0205 U (S25*18) 25x18mm HYD-RS-0206 U (S25*20) 25x20mm HYD-RS-0223 U (S26*16) 26x16mm HYD-RS-0224 U (S26*18) 26x18mm HYD-RS-0225 U (S26*20) 26x20mm HYD-RS-0222 U (S32*16) 32x16mm HYD-RS-0226 U (S32*18) 32x18mm HYD-RS-0207 U (S32*20) 32x20mm HYD-RS-0208 U (S32*25) 32x25mm HYD-RS-0227 U (S32*26) 32x26mm. Male straight: HYD-MS-0301 U (S16*1/2"M) 16mmx1/2"Mr HYD-MS-0302 U (S16*3/4"M) 16mmx3/4"Mr HYD-MS-0303 U (S18*1/2"M) 18mmx1/2"Mr HYD-MS-0304 U (S18*3/4"M) 18mmx3/4"Mr HYD-MS-0305 U (S20*1/2"M) 20mmx1/2"Mr HYD-MS-0306 U (S20*3/4"M) 20mmx3/4"Mr HYD-MS-0307 U (S20*1"M) 20mmx1"M HYD-MS-0308 U (S25*1/2"M) 25mmx1/2"Mr HYD-MS-0309 U (S25*3/4"M) 25mmx3/4"Mr HYD-MS-0310 U (S25*1"M) 25mmx1"M HYD-MS-0326 U (S26*1/2"M) 26mmx1/2"Mr HYD-MS-0327 U (S26*3/4"M) 26mmx3/4"Mr HYD-MS-0328 U (S26*1"M) 26mmx1"M HYD-MS-0311 U (S32*1/2"M) 32mmx1/2"M HYD-MS-0312 U (S32*3/4"M) 32mmx3/4"M HYD-MS-0313 U (S32*1"M) 32mmx1"M HYD-MS-0314 U (S32*11/4"M) 32mmx11/4"M HYD-MS-0315 U (S32*11/2"M) 32mmx11/2"M Female straight: HYD-FS-0401 U (S16*1/2"F) 16mmx1/2"F HYD-FS-0402 U (S16*3/4"F) 16mmx3/4"F HYD-FS-0403 U (S16*1"F) 16mmx1"F HYD-FS-0404 U (S18*1/2"F) 18mmx1/2"F HYD-FS-0405 U (S18*3/4"F) 18mmx3/4"F HYD-FS-0407 U (S20*1/2"F) 20mmx1/2"F HYD-FS-0408 U (S20*3/4"F) 20mmx3/4"F HYD-FS-0409 U (S20*1"F) 20mmx1"F HYD-FS-0410 U (S25*1/2"F) 25mmx1/2"F HYD-FS-0411 U (S25*3/4"F) 25mmx3/4"F HYD-FS-0412 U (S25*1"F) 25mmx1"F HYD-FS-0422 U (S26*1/2"F) 26mmx1/2"F HYD-FS-0423 U (S26*3/4"F) 26mmx3/4"F HYD-FS-0424 U (S26*1"F) 26mmx1"F HYD-FS-0413 U (S32*1/2"F) 32mmx1/2"F HYD-FS-0414 U (S32*3/4"F) 32mmx3/4"F HYD-FS-0415 U (S32*1"F) 32mmx1"F HYD-FS-0416 U (S32*11/4"F) 32mmx11/4"F HYD-FS-0417 U (S32*11/2"F) 32mmx11/2"F. Elbow: HYD-EL-0501 U (L1216) 16mm HYD-EL-0502 U (L1418) 18mm HYD-EL-0503 U (L1620) 20mm HYD-EL-0504 U (L2025) 25mm HYD-EL-0509 U (L2026) 26mm HYD-EL-0505 U (L2632) 32mm. Male elbow: HYD-ME-0801 U (L16*1/2"M) 16mmx1/2"M HYD-ME-0802 U (L16*3/4"M) 16mmx3/4"M HYD-ME-0803 U (L18*1/2"M) 18mmx1/2"M HYD-ME-0804 U (L18*3/4"M) 18mmx3/4"M HYD-ME-0805 U (L20*1/2"M) 20mmx1/2"M HYD-ME-0806 U (L20*3/4"M) 20mmx3/4"M HYD-ME-0813 U (L20*1"M) 20mmx1"M HYD-ME-0807 U (L25*1/2"M) 25mmx1/2"M HYD-ME-0808 U (L25*3/4"M) 25mmx3/4"M HYD-ME-0809 U (L25*1"M) 25mmx1"M HYD-ME-0815 U (L26*1/2"M) 26mmx1/2"M HYD-ME-0816 U (L26*3/4"M) 26mmx3/4"M HYD-ME-0817 U (L26*1"M) 26mmx1"M HYD-ME-0810 U (L32*1/2"M) 32mmx1/2"M HYD-ME-0811 U (L32*3/4"M) 32mmx3/4"M HYD-ME-0812 U (L32*1"M) 32mmx1"M HYD-ME-0814 U (L32*1 1/4"M) 32mmx11/4"M Female elbow: HYD-FE-0901 U (L16*1/2"F) 16mmx1/2"F HYD-FE-0902 U (L16*3/4"F) 16mmx3/4"F HYD-FE-0903 U (L18*1/2"F) 18mmx1/2"F HYD-FE-0904 U (L18*3/4"F) 18mmx3/4"F HYD-FE-0905 U (L20*1/2"F) 20mmx1/2"F HYD-FE-0906 U (L20*3/4"F) 20mmx3/4"F HYD-FE-0913 U (L20*1"F) 20mmx1"F HYD-FE-0907 U (L25*1/2"F) 25mmx1/2"F HYD-FE-0908 U (L25*3/4"F) 25mmx3/4"F HYD-FE-0909 U (L25*1"F) 25mmx1"F HYD-FE-0914 U (L26*1/2"F) 26mmx1/2"F HYD-FE-0915 U (L26*3/4"F) 26mmx3/4"F HYD-FE-0916 U (L26*1"F) 26mmx1"F HYD-FE-0910 U (L32*1/2"F) 32mmx1/2"F HYD-FE-0911 U (L32*3/4"F) 32mmx3/4"F HYD-FE-0912 U (L32*1"F) 32mmx1"F HYD-FE-0917 U (L32*1 1/4"F) 32mmx11/4"F Wall plated elbow: HYD-WE-1001 U (L16*1/2"F(A)) 16mmx1/2"F HYD-WE-1002 U (L16*3/4"F(A)) 16mmx3/4"F HYD-WE-1003 U (L18*1/2"F(A)) 18mmx1/2"F HYD-WE-1004 U (L20*1/2"F(A)) 20mmx1/2"F HYD-WE-1006 U (L20*3/4"F(A)) 20mmx3/4"F. Tee: HYD-TE-1101 U (T1216) 16mm HYD-TE-1102 U (T1418) 18mm HYD-TE-1103 U (T1620) 20mm HYD-TE-1104 U (T2025) 25mm HYD-TE-1109 U (T2026) 26mm HYD-TE-1105 U (T2632) 32mm. Reduced tee: HYD-RT-1202 U (T16*20*16) 16x20x16mm HYD-RT-1203 U (T16*25*16) 16x25x16 mm HYD-RT-1255 U (T16*26*16) 16x26x16mm HYD-RT-1204 U (T18*16*18) 18x16x18mm HYD-RT-1205 U (T18*20*18) 18x20x18mm HYD-RT-1206 U (T18*25*18) 18x25x18mm HYD-RT-1256 U (T18*26*18) 18x26x18mm HYD-RT-1207 U (T20*16*20) 20x16x20mm HYD-RT-1208 U (T20*18*20) 20x18x20mm HYD-RT-1209 U (T20*25*20) 20x25x20mm HYD-RT-1211 U (T25*16*25) 25x16x25mm HYD-RT-1259 U (T25*16*16) 25x16x16mm HYD-RT-1260 U (T26*16*16) 26x16x16mm HYD-RT-1212 U (T25*18*25) 25x18x25mm HYD-RT-1213 U (T25*20*25) 25x20x25mm HYD-RT-1214 U (T25*32*25) 25x32x25mm HYD-RT-1240 U (T20*26*20) 20x26x20mm HYD-RT-1241 U (T26*16*26) 26x16x26mm HYD-RT-1242 U (T26*18*26) 26x18x26mm HYD-RT-1243 U (T26*20*26) 26x20x26mm HYD-RT-1244 U (T26*32*26) 26x32x26mm HYD-RT-1215 U (T32*16*32) 32x16x32mm HYD-RT-1216 U (T32*18*32) 32x18x32mm HYD-RT-1217 U (T32*20*32) 32x20x32mm HYD-RT-1263 U (T32*25*32) 32x25x32mm HYD-RT-1225 U (T25*16*20) 25x16x20mm HYD-RT-1226 U (T32*20*25) 32x20x25mm HYD-RT-1246 U (T26*16*20) 26x16x20mm HYD-RT-1247 U (T32*20*25) 32x20x26mm HYD-RT-1218 U (T20*16*16) 20x16x16mm HYD-RT-1219 U (T20*20*16) 20x20x16mm HYD-RT-1220 U (T25*25*18) 25x25x18mm HYD-RT-1221 U (T25*25*20) 25x25x20mm HYD-RT-1222 U (T25*18*18) 25x18x18mm HYD-RT-1223 U (T25*20*20) 25x20x20mm HYD-RT-1224 U (T25*16*20) 25x16x20mm HYD-RT-1227 U (T32*20*25) 32x20x25mm HYD-RT-1261 U (T26*26*16) 26x26x16mm HYD-RT-1248 U (T26*26*18) 26x26x18mm HYD-RT-1249 U (T26*26*20) 26x26x20mm HYD-RT-1250 U (T26*18*18) 26x18x18mm HYD-RT-1251 U (T26*20*20) 26x20x20mm HYD-RT-1252 U (T26*20*16) 26x20x16mm HYD-RT-1253 U (T32*20*26) 32x20x26mm HYD-RT-1254 U (T32*32*16) 32x32x16mm HYD-RT-1264 U (T32*32*20) 32x32x20mm HYD-RT-1257 U (T32*32*26) 32x32x26mm HYD-RT-1262 U (T32*25*25) 32x25x25mm HYD-RT-1258 U (T32*26*26) 32x26x26mm HYD-RT-1245 U (T32*26*32) 32x26x32mm. Male tee: HYD-MT-2801 U (T16*1/2"M*16) 16mmx1/2"Mx16mm HYD-MT-2802 U (T16*3/4"M*16) 16mmx3/4"Mx16mm HYD-MT-2803 U (T20*1/2"M*20) 20mmx1/2"Mx20mm HYD-MT-2804 U (T20*3/4"M*20) 20mmx3/4"Mx20mm. Female tee: HYD-FT-1301 U (T16*1/2"F*16) 16mmx1/2"Fx16mm HYD-FT-1302 U (T16*3/4"F*16) 16mmx3/4"Fx16mm HYD-FT-1303 U (T18*1/2"F*18) 18mmx1/2"Fx18mm HYD-FT-1304 U (T18*3/4"F*18) 18mmx3/4"Fx18mm HYD-FT-1305 U (T20*1/2"F*20) 20mmx1/2"Fx20mm HYD-FT-1306 U (T20*3/4"F*20) 20mmx3/4"Fx20mm HYD-FT-1307 U (T20*1"F*20) 20mmx1"Fx20mm HYD-FT-1308 U (T25*1/2"F*25) 25mmx1/2"Fx25mm HYD-FT-1309 U (T25*3/4"F*25) 25mmx3/4"Fx25mm HYD-FT-1310 U (T25*1"F*25) 25mmx1"Fx25mm HYD-FT-1329 U (T26*1/2"F*26) 26mmx1/2"Fx26mm HYD-FT-1330 U (T26*3/4"F*26) 26mmx3/4"Fx26mm HYD-FT-1331 U (T26*1"F*26) 26mmx1"Fx26mm HYD-FT-1311 U (T32*1/2"F*32) 32mmx1/2"Fx32mm HYD-FT-1312 U (T32*3/4"F*32) 32mmx3/4"Fx32mm HYD-FT-1313 U (T32*1"F*32) 32mmx1"Fx32mm HYD-FT-1314 U (T32*11/4"F*32) 32mmx11/4"Fx32mm Cap: HYD-CP-2601 U (D1216) 16mm HYD-CP-2602 U (D1418) 18mm HYD-CP-2603 U (D1620) 20mm HYD-CP-2604 U (D2025) 25mm HYD-CP-2606 U (D2026) 26mm HYD-CP-2605 U (D2632) 32mm. Female union: YD-FU-2901 U (H16*1/2F) 16mmx1/2"F HYD-FU-2902 U (H16*3/4F) 16mmx3/4"F HYD-FU-2903 U (H20*1/2F) 20mmx1/2"F HYD-FU-2904 U (H20*3/4F) 20mmx3/4"F HYD-FU-2907 U (H25*1/2F) 25mmx1/2"F HYD-FU-2905 U (H25*3/4F) 25mmx3/4"F HYD-FU-2908 U (H25*1F) 25mmx1"F HYD-FU-2909 U (H26*1/2F) 26mmx1/2"F HYD-FU-2910 U (H26*3/4F) 26mmx3/4"F HYD-FU-2911 U (H26*1F) 26mmx1"F HYD-FU-2906 U (H32*1F) 32mmx1"F. Pipe: HYD-PXAX-1620 (PEXALPEX pipe) 16x2.0mm, HYD-PXAX-1820 (PEXALPEX pipe) 18x2.0mm, HYD-PXAX-2020 (PEXALPEX pipe) 20x2.0mm, HYD-PXAX-2525 (PEXALPEX pipe) 25x2.5mm, HYD-PXAX-2630 (PEXALPEX pipe) 26x3.0mm, HYD-PXAX-3230 (PEXALPEX pipe) 32x3.0mm.

Approval Holder:: Merchant Supplies Distribution Ltd

Company Name
Merchant Supplies Distribution Ltd
Address
Unit 2 Merlin Centre Acrewood Way St. Albans
Postcode
AL4 OJY
Phone
0203 915 2557
General Email
murat@gfsflex.com

View All Listings by this Company

WRAS Approval Number: #240404076

Range of M profile copper press fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404076
Size:: see models
Marking:: Brand name MAMBA, size, month/year & WRAS on body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: MAMBA Range: STRAIGHT COUPLING CxC: 60111515 15mm PRESSFIT COUPLER 60112222 22mm PRESSFIT COUPLER 60112828 28mm PRESSFIT COUPLER 60113535 35mm PRESSFIT COUPLER 60114242 42mm PRESSFIT COUPLER 60115454 54mm PRESSFIT COUPLER SLIP COUPLING C x C: 60171515 15mm PRESSFIT SLIP COUPLER 60172222 22mm PRESSFIT SLIP COUPLER 60172828 28mm PRESSFIT SLIP COUPLER 60173535 35mm PRESSFIT SLIP COUPLER 60174242 42mm PRESSFIT SLIP COUPLER 60175454 54mm PRESSFIT SLIP COUPLER REDUCING COUPLING C x C: 60112215 22mm X 15mm PRESSFIT REDUCING COUPLER 60112815 28mm X 15mm PRESSFIT REDUCING COUPLER 60112822 28mm X 22mm PRESSFIT REDUCING COUPLER 60113515 35mm X 15mm PRESSFIT REDUCING COUPLER 60113522 35mm X 22mm PRESSFIT REDUCING COUPLER 60113528 35mm X 28mm PRESSFIT REDUCING COUPLER 60114215 42mm X 15mm PRESSFIT REDUCING COUPLER 60114222 42mm X 22mm PRESSFIT REDUCING COUPLER 60114228 42mm X 28mm PRESSFIT REDUCING COUPLER 60114235 42mm X 35mm PRESSFIT REDUCING COUPLER 60115415 54mm X 15mm PRESSFIT REDUCING COUPLER 60115422 54mm X 22mm PRESSFIT REDUCING COUPLER 60115428 54mm X 28mm PRESSFIT REDUCING COUPLER 60115435 54mm X 35mm PRESSFIT REDUCING COUPLER 60115442 54mm X 42mm PRESSFIT REDUCING COUPLER FITTING REDUCER F x C: 60132215 22mm X 15mm PRESSFIT FITTNG REDUCER 60132815 28mm X 15mm PRESSFIT FITTNG REDUCER 60132822 28mm X 22mm PRESSFIT FITTNG REDUCER 60133515 35mm X 15mm PRESSFIT FITTNG REDUCER 60133522 35mm X 22mm PRESSFIT FITTNG REDUCER 60133528 35mm X 28mm PRESSFIT FITTNG REDUCER 60134215 42mm X 15mm PRESSFIT FITTNG REDUCER 60134222 42mm X 22mm PRESSFIT FITTNG REDUCER 60134228 42mm X 28mm PRESSFIT FITTNG REDUCER 60134235 42mm X 35mm PRESSFIT FITTNG REDUCER 60135415 54mm X 15mm PRESSFIT FITTNG REDUCER 60135422 54mm X 22mm PRESSFIT FITTNG REDUCER 60135428 54mm X 28mm PRESSFIT FITTNG REDUCER 60135435 54mm X 35mm PRESSFIT FITTNG REDUCER 60135442 54mm X 42mm PRESSFIT FITTNG REDUCER 90DEG ELBOW C x C: 60411515 15mm PRESSFIT ELBOW 60412222 22mm PRESSFIT ELBOW 60412828 28mm PRESSFIT ELBOW 60413535 35mm PRESSFIT ELBOW 60414242 42mm PRESSFIT ELBOW 60415454 54mm PRESSFIT ELBOW 90DEG STREET ELBOW F x C: 60431515 15mm PRESSFIT STREET ELBOW 60432222 22mm PRESSFIT STREET ELBOW 60432828 28mm PRESSFIT STREET ELBOW 60433535 35mm PRESSFIT STREET ELBOW 60434242 42mm PRESSFIT STREET ELBOW 60435454 54mm PRESSFIT STREET ELBOW 45DEG ELBOW C x C: 60451515 15mm PRESSFIT OBTUSE ELBOW 60452222 22mm PRESSFIT OBTUSE ELBOW 60452828 28mm PRESSFIT OBTUSE ELBOW 60453535 35mm PRESSFIT OBTUSE ELBOW 60454242 42mm PRESSFIT OBTUSE ELBOW 60455454 54mm PRESSFIT OBTUSE ELBOW 45DEG STREET ELBOW F x C: 60481515 15mm PRESSFIT OBTUSE STREET ELBOW 60482222 22mm PRESSFIT OBTUSE STREET ELBOW 60482828 28mm PRESSFIT OBTUSE STREET ELBOW 60483535 35mm PRESSFIT OBTUSE STREET ELBOW 60484242 42mm PRESSFIT OBTUSE STREET ELBOW 60485454 54mm PRESSFIT OBTUSE STREET ELBOW CAP C x C: 60811515 15mm PRESSFIT STOP END 60812222 22mm PRESSFIT STOP END 60812828 28mm PRESSFIT STOP END 60813535 35mm PRESSFIT STOP END 60814242 42mm PRESSFIT STOP END 60815454 54mm PRESSFIT STOP END EQUAL TEE C x C: 60151515 15mm PRESSFIT TEE 60222222 22mm PRESSFIT TEE 60282828 28mm PRESSFIT TEE 60353535 35mm PRESSFIT TEE 60424242 42mm PRESSFIT TEE 60545454 54mm PRESSFIT TEE PART CROSSOVER F x C: 60271515 15mm PRESSFIT PART CROSSOVER 60272222 22mm PRESSFIT PART CROSSOVER CROSSOVER C x C: 60291515 15mm PRESSFIT FULL CROSSOVER 60292222 22mm PRESSFIT FULL CROSSOVER REDUCER ELBOW 60412215 22mm X 15mm PRESSFIT REDUCING ELBOW REDUCING TEE: 60221515 22mm X 15mm X 15mm PRESSFIT REDUCING TEE 60221522 22mm X 15mm X 22mm PRESSFIT REDUCING TEE 60282222 28mm X 22mm X 22mm PRESSFIT REDUCING TEE 60282228 28mm X 22mm X 28mm PRESSFIT REDUCING TEE 60222215 22mm X 22mm X 15mm PRESSFIT REDUCING TEE 60282815 28mm X 28mm X 15mm PRESSFIT REDUCING TEE 60282822 28mm X 28mm X 22mm PRESSFIT REDUCING TEE 60353515 35mm X 35mm X 15mm PRESSFIT REDUCING TEE 60353522 35mm X 35mm X 22mm PRESSFIT REDUCING TEE 60353528 35mm X 35mm X 28mm PRESSFIT REDUCING TEE 60424215 42mm X 42mm X 15mm PRESSFIT REDUCING TEE 60424222 42mm X 42mm X 22mm PRESSFIT REDUCING TEE 60424228 42mm X 42mm X 28mm PRESSFIT REDUCING TEE 60424235 42mm X 42mm X 35mm PRESSFIT REDUCING TEE 60545415 54mm X 54mm X 15mm PRESSFIT REDUCING TEE 60545422 54mm X 54mm X 22mm PRESSFIT REDUCING TEE 60545428 54mm X 54mm X 28mm PRESSFIT REDUCING TEE 60545435 54mm X 54mm X 35mm PRESSFIT REDUCING TEE 60545442 54mm X 54mm X 42mm PRESSFIT REDUCING TEE

Approval Holder:: MDS Global Sourcing Ltd

Company Name
MDS Global Sourcing Ltd
Address
10 Alesbury Court Lapworth
Postcode
B94 6BE
Country
United Kingdom
Phone
07771 755057
General Email
scott@mdsgroup.co.uk

View All Listings by this Company

WRAS Approval Number: #250702043

Range of compression fittings incorporating polypropylene bodies, plastic pipe liners, plastic grip rings and EPDM seals. For use with PE100 pipe manufactured to BS EN 12201. Maximum working pressure: 16Bar. Maximum operating temperature: 23°C

Section:: 1160 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250702043
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Compression: 20mm, 25mm, 32mm and 75mm sizes only are approved. Threaded ½” - 2 ½” BSP (M & F).
Marking:: Poliext, Size and pressure on nut.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: 627_01 Couplings, 627_05 Female Couplings, 627_12 Male Couplings, 627_19 Elbows, 627_23 Female Elbows, 627_28 Male Elbows, 627_32 End Plugs, 627_36 Reducing Couplings, 627_39 Tee Couplings, 627_43 Tee Coupling Females, 627_49 Tee Coupling Males.

Approval Holder:: Poliext Kft

Company Name
Poliext Kft
Address
Matkó tanya 232, Kecskemét
Country
Hungary

View All Listings by this Company

WRAS Approval Number: #250615003

‘HDE-210xxx-xx’ range of brass press-fit fittings incorporating EPDM ‘O’-rings for use with copper pipes (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Plug: HDE-210001-01: 15mm, HDE-210001-02: 22mm, HDE-210001-03: 28mm, HDE-210001-05: 35mm, HDE-210001-06: 42mm, HDE-210001-07: 54mm. Straight Connector: HDE-210002-01: 15mm*15mm, HDE-210002-02: 22mm*22mm, HDE-210002-03: 28mm*28mm, HDE-210002-05: 35mm*35mm, HDE-210002-06: 42mm*42mm, HDE-210002-07: 54mm*54mm. Male Connector: HDE-210003-01 : 15mm*½”, HDE-210003-02 : 22mm*¾”, HDE-210003-03 : 28mm*1”, HDE-210003-05 : 35mm*1¼”, HDE-210003-06 : 42mm*1½”, HDE-210003-07 : 54mm*2”. Female Connector: HDE-210005-01 : 15mm*½”, HDE-210005-02 : 22mm*¾”, HDE-210005-03 : 28mm*1”, HDE-210005-05 : 35mm*1¼”, HDE-210005-06 : 42mm*1½”, HDE-210005-07 : 54mm*2”. Elbow Connector: HDE-210006-01: 15mm*15mm, HDE-210006-02: 22mm*22mm, HDE-210006-03: 28mm*28mm, HDE-210006-05: 35mm*35mm, HDE-210006-06: 42mm*42mm, HDE-210006-07: 54mm*54mm. Male Elbow Connector: HDE-210007-01: 15mm*½”, HDE-210007-02: 22mm*¾”, HDE-210007-03: 28mm*1”, HDE-210007-05: 35mm*1¼”, HDE-210007-06: 42mm*1½”, HDE-210007-07: 54mm*2”. Female Elbow Connector: HDE-210008-01: 15mm*½”, HDE-210008-02: 22mm*¾”, HDE-210008-03: 28mm*1”, HDE-210008-05: 35mm*1¼”, HDE-210008-06: 42mm*1½”, HDE-210008-07: 54mm*2”. Tee Connector: HDE-210009-01: 15mm*15mm*15mm, HDE-210009-02: 22mm*22mm*22mm, HDE-210009-03: 28mm*28mm*28mm, HDE-210009-05: 35mm*35mm*35mm, HDE-210009-06: 42mm*42mm*42mm, HDE-210009-07: 54mm*54mm*54mm. Male Tee Connector: HDE-210010-01: 15mm*15mm*½”, HDE-210010-02: 22mm*22mm*¾”, HDE-210010-03: 28mm*28mm*1”, HDE-210010-05: 35mm*35mm*1¼”, HDE-210010-06: 42mm*42mm*1½”, HDE-210010-07: 54mm*54mm*2”. Female Tee Connector: HDE-210011-01 : 15mm*15mm*½”, HDE-210011-02 : 22mm*22mm*¾”, HDE-210011-03 : 28mm*28mm*1”, HDE-210011-05 : 35mm*35mm*1¼”, HDE-210011-06 : 42mm*42mm*1½”, HDE-210011-07 : 54mm*54mm*2”. Wall-Plate Elbow Connector: HDE-210012-01: 15mm*15mm, HDE-210012-02: 22mm*22mm, HDE-210012-03: 28mm*28mm, HDE-210012-05: 35mm*35mm, HDE-210012-06: 42mm*42mm, HDE-210012-07: 54mm*54mm. Wall-Plate Male Elbow Connector: HDE-210013-01: 15mm*½”, HDE-210013-02: 22mm*¾”, HDE-210013-03: 28mm*1”, HDE-210013-05: 35mm*1¼”, HDE-210013-06: 42mm*1½”, HDE-210013-07: 54mm*2”. Wall-Plate Female Elbow Connector: HDE-210015-01: 15mm*½”, HDE-210015-02: 22mm*¾”, HDE-210015-03: 28mm*1”, HDE-210015-05: 35mm*1¼”, HDE-210015-06: 42mm*1½”, HDE-210015-07: 54mm*2”. All threaded connection are BSP.

Approval Holder:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company
Manufacturer:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company

WRAS Approval Number: #250602024

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure: 16 Bar. Maximum operating temperature: 65°C.

Section:: 1220 Fittings for use with Tube and Pipe
Section Subtitle:: Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:: 250602024
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Flanged - DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1300, DN1400, DN1500, DN1600, DN1700 & DN1800.
Marking:: DVD Valves, size, pressure and year of manufacturer (YYYY) on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: DVD-FDM.

Approval Holder:: DOGUS VANA VE DOKUM SAN. TIC. A.S.

Company Name
DOGUS VANA VE DOKUM SAN. TIC. A.S.
Address
1202/1 SOKAK NO:54/F YENISEHIR IZMIR
Postcode
35170
Country
Turkey
Phone
+905322625938
General Email
hayro@dogusvana.com.tr

View All Listings by this Company

WRAS Approval Number: #250704013

Range of ultrasonic water meters with brass bodies and EPDM O-rings. The inlets incorporate a double check valve assembly, verified by test - suitable for backflow protection against Fluid Category 3. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Huizhong logo, Model No, DN, CR and product info on face. CR and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: SCL-61H-100 DN25: ¾” BSP (M) DN40: ¾” BSP (M)

Approval Holder:: Huizhong Instrumentation Co., Ltd.

Company Name
Huizhong Instrumentation Co., Ltd.
Address
No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province
Country
China

View All Listings by this Company

WRAS Approval Number: #250702703

Water shock absorber incorporating a stainless-steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M).
Marking:: Aquasystem logo (brand of Zilio Industries SpA), model code, date of manufacture (DD/MM/YYYY), pressure and other technical information on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: WSA016

Approval Holder:: Zilio Industries SPA

Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552
General Email
info@zilioindustries.com

View All Listings by this Company