‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework, water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.
Filling valve with a DZR brass body comprising of: Two check valve cartridges on the inlet, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve preset at 1.4 bar, a sprung loaded self-closing valve and a single check valve cartridge on the outlet, verified by test (suitable for backflow protection against Fluid Category 2). There is a drain port below the self-closing valve chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 100°C.
Range of water meters with blue epoxy coated brass or iron bodies (see models) and a plastic strainer on the inlet. Maximum working pressure 16.0 Bar or10.0 Bar(see models). Maximum operating temperature 50°C.
Range of flow sensors with brass bodies (various grades - see model). Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.
Screw down, angled isolation valve with a dome type operating member, incorporating a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.
Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 26.569.000 | Chrome | 1/2" BSP (F) | Open Outlet bar | 65 °C | Grohe | faceplate | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DS3007 | chrome | ½” BSP (F) | Open outlet bar | 85 °C | DELMEI | On handle | No | Not applicable | Not Applicable | ||
| DS5010 | chrome | ½” BSP (F) | Open outlet bar | 85 °C | DELMEI | On handle | No | Not applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S015* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S016* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S017* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S018* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S019* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S020* | Various | 1/2" BSP (M) | For open outlet use only bar | 75 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S021* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S022* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S34011 | Chrome plated | 1/2" BSP (M) | For open outlet use only bar | 75 °C | DOMOO | Body | No | ||||
| S06041 | Chrome plated | 1/2" BSP (M) | For open outlet use only bar | 75 °C | DOMOO | Body | No | ||||
| S185015(88500103) | Chrome plated | 1/2" BSP (M) | For open outlet use only bar | 65 °C | DOMOO | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 37902W-MB5 | BLACK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-MG5 | GREEN | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-GB5 | BLUE | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-CS5 | GREY | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37902W-BP5 | PINK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Handset, |
| 37903W-MB5 | BLACK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-MG5 | GREEN | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-GB5 | BLUE | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-CS5 | GREY | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| 37903W-BP5 | PINK | ½” BSP | OPEN OUTLET bar | 60°C °C | MIRA SHOWERS | SPRAY PLATE | No | Not applicable | Not Applicable | Open Outlet | Fixed Head, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| WJ V/HANDLE CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 931 IX | STAINLESS STEEL | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 23931 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 27931 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 28931 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 21931 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 649510 CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 639510 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 679510 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 689510 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 619510 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH G | POLISHED GOLD | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH NK | NICKEL | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ GRSH BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 15930 CH | CHROME | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 23930 BBR | BRUSHED BRASS | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 27930 BBL | BRUSHED BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 28930 MB | MATT BLACK | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No | ||||
| WJ 21930 BRZ | BRUSHED BRONZE | 1/2BSP(M) | Open Outlet bar | 60 °C | ZHONG RUI YI SHENG | on shower body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 21-005-481 | Chrome plated | ½” BSP (M) | Open outlet use bar | 65℃ °C | AKW | on handset body. | No | Handset, | |||
| 21-005-482 | White colour | ½” BSP (M) | Open outlet use bar | 65℃ °C | AKW | on handset body. | No | Handset, |
Range of drain cock elbows incorporating a DZR brass body, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures:16.0 bar. Maximum operating temperature 85°C.
Draining tap with a brass body and a rising spindle headwork. Pressfit jointing is achieved via a crimping tool using a ‘V’ profile and is for use with copper pipes (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of 2, 3 and 4 port manifold assemblies with either DRZ brass (3834.1, 3834.34, 3835.34, 3835.1, 3837.37 & 3837.1) or brushed chrome plated brass bodies incorporating screw down isolation valves with dome type operating members at each of the outlets. Maximum working pressure: 16 Bar. Maximum operating temperature: 95°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1011JC45 | Chrome | ½” BSP (M) x ¾” BSP (M) offset union | 10 bar | 85 °C | HUANRI | Rear of body | No | Open Outlet |
T-type thermostatic blending valve with a brushed chrome, DZR brass body. Temperature is pre-set under a fixed cap. The inlets incorporate stainless steel strainers and single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F1100* | chrome or matte black | 3/4” BSP(F) | 5 bar | 85 °C | KY-LIN | on body | No | Ceramic cartridge |
Where * denotes the finish color, and can be replaced with the following: CHR = Chrome BLK = Matte Black The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Page 60 of 69
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
