Range of cylindrical or tubular expansion vessels with epoxy coated carbon steel bodies. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” or 1” BSP (M)

Marking:

Trade-Tec, size in L and technical information on adhesive label

Installation Requirements:

R001 R530

Expiry date:

30/06/2029

Model:

TRPVES08 TRPVES12 TRPVES19 TRPVES24 TRPVES35 TRPVES50 TRPVES80 TRPVES100

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of filling loop assemblies consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression or 15mm pushfit.

Marking:

Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

521726, 941192.

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

View All Listings by this Company

Range of stainless-steel(SS304L) press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

MTF, model number, Size on fitting

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Marla Tube Fittings Limited

Company Name

Marla Tube Fittings Limited

Address

Kinwarton Farm Road Alcester

Postcode

B49 6EH

Country

United Kingdom

Phone

01789 761207

General Email

graham.walker@marla.co.uk

View All Listings by this Company

Range of green Sappro butt-welded polypropylene fittings for use with Sappro PPR pipes. Maximum working pressure: 20 Bar. Maximum operating temperature: 23°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250802006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sappro logo and size on body. Sappro logo, ISO 15874-2 and size on pipe body

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Pipe: SFP6285205000015 20 mm SFP6285205000022 25 mm SFP6285205000039 32 mm SFP6285205000046 40 mm SFP6285205000053 50 mm SFP6285205000060 63 mm SFP6285205000077 75 mm SFP6285205000084 90 mm Elbow 90°: SFP6285205002613 20 mm SFP6285205002620 25 mm SFP6285205002637 32 mm SFP6285205002644 40 mm SFP6285205002651 50 mm SFP6285205002668 63 mm SFP6285205002675 75 mm SFP6285205002682 90 mm Elbow 45°: SFP6285205002798 20 mm SFP6285205002804 25 mm SFP6285205002811 32 mm SFP6285205003030 40 mm SFP6285205003047 50 mm SFP6285205003054 63 mm SFP6285205003061 75 mm SFP6285205003078 90 mm Equal Tee: SFP6285205003566 20 mm SFP6285205003573 25 mm SFP6285205003580 32 mm SFP6285205003597 40 mm SFP6285205003603 50 mm SFP6285205003610 63 mm SFP6285205003627 75 mm SFP6285205003634 90 mm Socket: SFP6285205003221 20 mm SFP6285205003238 25 mm SFP6285205003245 32 mm SFP6285205003252 40 mm SFP6285205003269 50 mm SFP6285205003276 63 mm SFP6285205003283 75 mm SFP6285205003290 90 mm Bridge Bend: SFP6285205001593 20mm SFP6285205001609 25mm SFP6285205001616 32mm Socket Bridge Bend: SFP6285205002033 25mm End Cap: SFP6285205003740 20mm SFP6285205003962 25mm SFP6285205003979 32mm SFP6285205003986 40mm SFP6285205003993 50mm SFP6285205004006 63mm SFP6285205004013 75mm SFP6285205004020 90mm Male Plug: SFP6285205004136 20mm Reducer Socket: SFP6285205007267 25mm x 20mm SFP6285205007281 32mm x 25mm SFP6285205007274 32mm x 20mm SFP6285205007304 40mm x 25mm SFP6285205007311 40mm x 32mm SFP6285205007313 50mm x 25mm SFP6285205007314 50mm x 32mm SFP6285205007315 50mm x 40mm SFP6285205007317 63mm x 25mm SFP6285205007318 63mm x 32mm SFP6285205007319 63mm x 40mm SFP6285205007320 63mm x 50mm Reducer: SFP6285205005331 75mm x 32mm SFP6285205005348 75mm x 40mm SFP6285205005355 75mm x 50mm SFP6285205005362 75mm x 63mm Reducer Tee: SFP6285205005911 25mm x 20mm SFP6285205006208 32mm x 25mm SFP6285205006222 40mm x 25mm SFP6285205006239 40mm x 32mm SFP6285205006604 50mm x 25mm SFP6285205006628 50mm x 32mm SFP6285205006642 63mm x 25mm SFP6285205006666 63mm x 32mm SFP6285205006673 63mm x 40mm SFP6285205006697 75mm x 32mm SFP6285205006703 75mm x 40mm SFP6285205006710 75mm x 50mm SFP6285205006727 75mm x 63mm Female Socket: SFP6285205007625 20mm x 1/2" BSP (F) SFP6285205007626 20mm x 3/4" BSP (F) SFP6285205007627 25mm x 1/2" BSP (F) SFP6285205007628 25mm x 3/4" BSP (F) SFP6285205007629 32mm x 1/2" BSP (F) SFP6285205007630 32mm x 3/4" BSP (F) SFP6285205007631 32mm x 1" BSP (F) Male Socket: SFP6285205007660 20mm x 1/2" BSP (M) SFP6285205007661 20mm x 3/4" BSP (M) SFP6285205007662 25mm x 1/2" BSP (M) SFP6285205007663 25mm x 3/4" BSP (M) SFP6285205007664 32mm x 1/2" BSP (M) SFP6285205007665 32mm x 3/4" BSP (M) Female Double Tee: SFP6285205007458 25mm x 1/2" BSP (F) Female Elbow: SFP6285205008039 20mm x 1/2" BSP (F) SFP6285205008041 25mm x 1/2" BSP (F) SFP6285205008042 25mm x 3/4" BSP (F) SFP6285205008043 32mm x 1/2" BSP (F) SFP6285205008044 32mm x 3/4" BSP (F) SFP6285205008045 32mm x 1" BSP (F) Male Elbow: SFP6285205008055 25mm x 1/2" BSP (M) SFP6285205008056 25mm x 3/4" BSP (M) SFP6285205008058 32mm x 1" BSP (M) Male Hexagon: SFP6285205008025 32mm x 1" BSP (M) SFP6285205008027 40mm x 1 1/4" BSP (M) SFP6285205008028 50mm x 1 1/2" BSP (M) SFP6285205008029 63mm x 2" BSP (M) SFP6285205008030 75mm x 2 1/2" BSP (M) SFP6285205008031 90mm x 3" BSP (M) Female Tee: SFP6285205007599 25mm x 1/2" BSP (F) SFP6285205007600 25mm x 3/4" BSP (F) SFP6285205007601 32mm x 1/2" BSP (F) SFP6285205007602 32mm x 3/4" BSP (F) SFP6285205007603 32mm x 1" BSP (F)

Approval Holder:

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Company Name

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Address

Albjadiya Industrial RIYADH

Country

Saudi Arabia

View All Listings by this Company

F1C compression & F5 press fittings for use with B1 multilayer PEX/AL/PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250406702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12mm, 16mm, 20mm, 25mm, 26mm & 32mm.

Marking:

Fittings: Rifeng, Size, crimp profile (U), date of manufacture (yyyy/mm), on crimp sleeve. Pipes: Rifeng, PEXb/AL/PEXb, pressure, size, date of manufacture & batch no.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

B1 multilayer PEX/AL/PEX pipe, F1C compression fittings & F5 press fittings. Pipe: Multilayer PEX/AL/PEX Pipes B1-0912 Multilayer PEX/AL/PEX Pipes B1-1216 Multilayer PEX/AL/PEX Pipes B1-1620 Multilayer PEX/AL/PEX Pipes B1-2025 Multilayer PEX/AL/PEX Pipes B1-2026 Multilayer PEX/AL/PEX Pipes B1-2632 F5 Equal straight union: F5-S0912*0912 F5-S1216*1216 F5-S1620*1620 F5-S2025*2025 F5-S2026*2026 F5-S2632*2632 F5 Reducer: F5-S1216*0912 F5-S1620*0912 F5-S1620*1216 F5-S2025*0912 F5-S2025*1216 F5-S2025*1620 F5-S2026*0912 F5-S2026*1216 F5-S2026*1620 F5-S2632*0912 F5-S2632*1216 F5-S2632*1620 F5-S2632*2025 F5-S2632*2026 F5 Male straight union: F5-S0912*1/2 F5-S0912*3/4 F5-S1216*3/8 F5-S1216*1/4 F5-S1216*1/2 F5-S1216*3/4 F5-S1216*1 F5-S1620*3/8 F5-S1620*1/2 F5-S1620*3/4 F5-S1620*1 F5-S2025*1/2 F5-S2025*3/4 F5-S2025*1 F5-S2026*1/2 F5-S2026*3/4 F5-S2026*1 F5-S2632*1/2 F5-S2632*3/4 F5-S2632*1 F5-S2632*1 1/4 F5-S2632*1 1/2 F5 Female straight union: F5-S0912*1/2F F5-S0912*3/4F F5-S1216*3/8F F5-S1216*1/4F F5-S1216*1/2F F5-S1216*3/4F F5-S1216*1F F5-S1620*3/8F F5-S1620*1/2F F5-S1620*3/4F F5-S1620*1F F5-S2025*1/2F F5-S2025*3/4F F5-S2025*1F F5-S2026*1/2F F5-S2026*3/4F F5-S2026*1F F5-S2632*1/2F F5-S2632*3/4F F5-S2632*1F F5-S2632*1 1/4F F5-S2632*1 1/2F F5 Equal elbow: F5-L0912*0912 F5-L1216*1216 F5-L1620*1620 F5-L2025*2025 F5-L2026*2026 F5-L2632*2632 F5 Equal elbow (45°): F5-L0912*0912 (45°) F5-L1216*1216 (45°) F5-L1620*1620 (45°) F5-L2025*2025 (45°) F5-L2026*2026 (45°) F5-L2632*2632(45°) F5 Unequal elbow: F5-L1216*0912 F5-L1620*0912 F5-L1620*1216 F5-L2025*0912 F5-L2025*1216 F5-L2025*1620 F5-L2026*0912 F5-L2026*1216 F5-L2026*1620 F5-L2632*0912 F5-L2632*1216 F5-L2632*1620 F5-L2632*2025 F5-L2632*2026 F5 Male elbow: F5-L0912*1/2 F5-L0912*3/4 F5-L1216*3/8 F5-L1216*1/4 F5-L1216*1/2 F5-L1216*3/4 F5-L1216*1 F5-L1620*3/8 F5-L1620*1/2 F5-L1620*3/4 F5-L1620*1 F5-L2025*1/2 F5-L2025*3/4 F5-L2025*1 F5-L2026*1/2 F5-L2026*3/4 F5-L2026*1 F5-L2632*1/2 F5-L2632*3/4 F5-L2632*1 F5-L2632*1 1/4 F5-L2632*1 1/2 F5 Female elbow: F5-L0912*1/2F F5-L0912*3/4F F5-L1216*3/8F F5-L1216*1/4F F5-L1216*1/2F F5-L1216*3/4F F5-L1216*1F F5-L1620*3/8F F5-L1620*1/2F F5-L1620*3/4F F5-L1620*1F F5-L2025*1/2F F5-L2025*3/4F F5-L2025*1F F5-L2026*1/2F F5-L2026*3/4F F5-L2026*1F F5-L2632*1/2F F5-L2632*3/4F F5-L2632*1F F5-L2632*1 1/4F F5-L2632*1 1/2F F5 Equal tee: F5-T0912*0912*0912 F5-T1216*1216*1216 F5-T1620*1620*1620 F5-T2025*2025*2025 F5-T2026*2026*2026 F5-T2632*2632*2632 F5 Unequal tee: F5-T1216*1620*1216 F5-T1620*1216*1216 F5-T1620*1620*1216 F5-T1620*2025*1620 F5-T2025*1216*1216 F5-T2025*1216*1620 F5-T2025*1216*2025 F5-T2025*1620*1216 F5-T2025*1620*1620 F5-T2025*1620*2025 F5-T2025*2025*1216 F5-T2025*2025*1620 F5-T2025*2632*2025 F5-T2632*1216*2632 F5-T2632*1620*2632 F5-T2632*2025*2025 F5-T2632*2025*2632 F5-T0912*1216*0912 F5-T2632*2026*2632 F5-T1620*1216*1620 F5-T1216*2025*1216 F5 Male tee: F5-T0912*1/2*0912 F5-T0912*3/4*0912 F5-T1216*3/8*1216 F5-T1216*1/4*1216 F5-T1216*1/2*1216 F5-T1216*3/4*1216 F5-T1216*1*1216 F5-T1620*3/8*1620 F5-T1620*1/2*1620 F5-T1620*3/4*1620 F5-T1620*1*1620 F5-T2025*1/2*2025 F5-T2025*3/4*2025 F5-T2025*1*2025 F5-T2026*1/2*2026 F5-T2026*3/4*2026 F5-T2026*1*2026 F5-T2632*1/2*2632 F5-T2632*3/4*2632 F5-T2632*1*2632 F5-T2632*1 1/4*2632 F5-T2632*1 1/2*2632 F5 Female tee: F5-T0912*1/2F*0912 F5-T0912*3/4F*0912 F5-T1216*3/8F*1216 F5-T1216*1/4F*1216 F5-T1216*1/2F*1216 F5-T1216*3/4F*1216 F5-T1216*1F*1216 F5-T1620*3/8F*1620 F5-T1620*1/2F*1620 F5-T1620*3/4F*1620 F5-T1620*1F*1620 F5-T2025*1/2F*2025 F5-T2025*3/4F*2025 F5-T2025*1F*2025 F5-T2026*1/2F*2026 F5-T2026*3/4F*2026 F5-T2026*1F*2026 F5-T2632*1/2F*2632 F5-T2632*3/4F*2632 F5-T2632*1F*2632 F5-T2632*1 1/4F*2632 F5-T2632*1 1/2F*2632 F5 Demountable female straight union: F5-S0912*1/2F(H) F5-S0912*3/4F(H) F5-S1216*3/8F(H) F5-S1216*1/4F(H) F5-S1216*1/2F(H) F5-S1216*3/4F(H) F5-S1216*1F(H) F5-S1620*3/8F(H) F5-S1620*1/2F(H) F5-S1620*3/4F(H) F5-S1620*1F(H) F5-S2025*1/2F(H) F5-S2025*3/4F(H) F5-S2025*1F(H) F5-S2026*1/2F(H) F5-S2026*3/4F(H) F5-S2026*1F(H) F5-S2632*1/2F(H) F5-S2632*3/4F(H) F5-S2632*1F(H) F5-S2632*1 1/4F(H) F5-S2632*1 1/2F(H) F5 End cap: F5-D0912 F5-D1216 F5-D1620 F5-D2025 F5-D2026 F5-D2632 F1C End cap: F1-D0912 F1-D1216 F1-D1620 F1-D2025 F1-D2026 F1-D2632 F5 Connector core: F5-C1216x1/2 F5-C1620x1/2 F5-C1216x3/4 F5-C1620x3/4 F5-C2025x3/4 F5 Wall plated female elbow: F5-L1216x1/2F (Z) F5-L1620x1/2F (Z) F5-L1620x3/4F (Z) F5-L1216x1/2F (Z4) F5-L1620x1/2F (Z4) F5-L1620x3/4F (Z4) F1 MLCP to Copper Adaptor: F1-S1216x15Cu C (MUL) F1-S1620x15Cu C (MUL) F1-S1620x22Cu C (MUL) F1-S2025x22Cu C (MUL) F1-S2025x28Cu C (MUL) F1-S2632x28Cu C (MUL) F1-S1216x15Cu2 C F1-S1620x15Cu2 C F1-S2025x28Cu2 C F1-S2632x28Cu2 C F5 MLCP to Copper Adaptor: F5-S1216x15Cu (MUL) F5-S1620x15Cu (MUL) F5-S1620x22Cu (MUL) F5-S2025x22Cu (MUL) F5-S2025x28Cu (MUL) F5-S2632x28Cu (MUL) F5-S1216x15Cu (150) F5-S1620x22Cu (150) F5-S1216x15Cu2 F5-S1620x22Cu2 F5-S2025x22Cu2 F5-S2632x28Cu2 Radiator elbow copper adapter: F5-L1216xφ15S Assembly Double Fittings: F5-L1216xφ15S (Z1) (GZ1) Copper Radiator Tee: F5-T1216xφ15Sx1216

Product Images

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Range of DZR brass compression fittings for use with Q-Therm PEX-b Pipes (SDR 7.4) Maximum working pressure:20 bar, cold water use only

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm and 20mm

Marking:

Q-THERM, UAE, DZR and SIZE on compression nut. Pipe: “Q-THERM, 16mm х 2.2mm PE-Xb PN20 DIN 16892/93 ISO 15875 7NO 95° WRAS APPROVED MATERIAL HH: MM DD/MM/YYYY Made in UAE(RAK)

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

PX00PS2000Y: Q-Therm PEX-b Pipe, DN 16mm, SDR 7.4, PN20, 16mm x 2.2mm PX00PS2001Y: Q-Therm PEX-b Pipe DN 20mm, SDR 7.4, PN20, 20mm x 2.8mm PXYCBE0001R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCBE0101R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 20mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0001R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0101R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 20mm x ½” BSP (M (DZR Brass Compression Fitting) PXYCMA0001R Q-Therm DZR Brass Male PE-X Adaptor 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCMA0101R Q-Therm DZR Brass Male PE-X Adaptor 20mm x ½” BSP (M) (DZR Brass Compression Fitting)

Manufacturer:

Quantum Industries LLC

Company Name

Quantum Industries LLC

Address

Al Ghail Industrial Park, Ras Al Khaimah, PB 86488

Country

UAE

View All Listings by this Company

EG Range of copper, brass capillary lead free solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

EG1 Straight Coupling 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG1M Metric/ Imperial Adaptor 15mm x 1/2"， 22mm x 3/4" EG1R Reducing coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 22mm，35mm x 28mm，42mm x 28mm， 42mm x 35mm，54mm x 35mm，54mm x 42mm EG1S Slip Coupling 15mm， 22mm， 28mm EG2 Straight Female Connector 15mm x 1/2"，22mm x 1/2"，22mm x 3/4"，28mm x 1"，35mm x 1 1/4"，42mm x 1 1/2"，54mm x 2" EG3 Straight Male Connector 15mm x 1/2"，22mm x 3/4"，28mm x 1"，35mm x 1 1/4"，42mm x 1 1/2"，54mm x 2" EG6 Fitting Reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 22mm，42mm x 28mm，42mm x 35mm， 54mm x 28mm，54mm x 35mm，54mm x 42mm EG12 90° Elbow 15mm, 22mm， 28mm， 35mm， 42mm， 54mm EG12S Street Elbow 15mm， 22mm， 28mm EG13 Male Elbow 15mm x 1/2"，22mm x 3/4" EG14 Female Elbow 15mm x 1/2"，22mm x 1/2"，22mm x 3/4" EG15 Wallplate Elbow 15mm x 1/2" EG21 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG24 Equal Tee 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG25 Reduced Branch Tee 22mm x 22mm x 15mm， 28mm x 28mm x 15mm ， 28mm x 28mm x 22mm， 35mm x 35mm x 15mm ， 35mm x 35mm x 22mm， 35mm x 35mm x 28mm ， 42mm x 42mm x 15mm， 42mm x 42mm x 22mm ， 42mm x 42mm x 28mm， 42mm x 42mm x 35mm ， 54mm x 54mm x 15mm， 54mm x 54mm x 22mm ， 54mm x 54mm x 28mm， 54mm x 54mm x 35mm ， 54mm x 54mm x 42mm EG26 Reduced One End Tee 22mm x 15mm x 22mm， 28mm x 15mm x 28mm ， 28mm x 22mm x 28mm EG27 Reduced End & Branch Tee 22mm x 15mm x 15mm， 28mm x 22mm x 15mm ， 28mm x 22mm x 22mm EG28 Two Reduced End Tee 15mm x 15mm x 22mm，22mm x 22mm x 28mm EG30 Centre Female Tee 15mm x 15mm x 1/2"，22mm x 22mm x 1/2"，22mm x 22mm x 3/4" EG61 Stop End 15mm, 22mm， 28mm， 35mm， 42mm， 54mm

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15MM– 54MM & 1/2” – 1”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression SB-COMCP015 – 15mm SB-COMCP022 – 22mm SB-COMCP028 – 28mm SB-COMCP035 – 35mm SB-COMCP042 – 42mm SB-COMCP054 – 54mm 90 Degree Elbow Compression SB-COMEL015 – 15mm SB-COMEL022 – 22mm SB-COMEL028 – 28mm SB-COMEL035 – 35mm SB-COMEL042 – 42mm SB-COMEL054 – 54mm Equal Tee Compression SB-COMTE015 – 15mm SB-COMTE022 – 22mm SB-COMTE028 – 28mm SB-OMTE035 – 35mm SB-COMTE042 – 42mm SB-COMTE054 – 54mm Male Iron Coupling Compression SB-COMCPMI0153/8 – 15mm x 3/8” SB-COMCPMI0151/2 – 15mm x ½” SB-COMCPMI0221/2 – 22mm x ½” SB-COMCPMI0223/4 – 22mm x ¾” SB-COMCPMI0221 – 22mm x 1 “ SB-COMCPMI0281 – 28mm x 1” Female Iron Coupling Chrome Compression SB-COMCPFI0151/2CP – 15mm x ½” SB-COMCPFI0223/4CP – 22mm x ¾” End Cap Compression SB-COMEC015 – 15mm SB-COMEC022 – 22mm

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Manufacturer:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

Range of compression fittings with brass, nickel plated brass bodies for use with copper pipe (manufactured to EN 1057). For above ground use only. Max working pressure 16.0 bar. Max operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm. ¼” - 1¼” BSP (M) or (F). Added June 2025: Additional 8 - 35mm sizes (see model). 42mm - 54mm. 1½” - 2” BSP (M) or (F).

Marking:

MT(Brand name) , Size, WRAS and EN 1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Equal Straight: 6601012 - 12×12 6601015 - 15×15 6601018 - 18×18 6601022 - 22×22 6601028 - 28×28 6601035 - 35×35 6601042 - 42x42 6601054 - 54x54 6701008 8×8 6701010 - 10×10 6701012 - 12×12 6701014 - 14×14 6701015 - 15×15 6701016 - 16×16 6701018 - 18×18 6701022 - 22×22 6701028 - 28×28 6701035 - 35×35 6701042 - 42x42 6701054 - 54x54 Reducing Straight: 660101815 - 18×15 660102215 - 22×15 660102218 - 22×18 660102822 - 28×22 670101008 - 10×8 670101210 - 12×10 670101508 - 15×8 670101510- 15×10 670101512 - 15×12 670101815 - 18×15 670102215 - 22×15 670102822 - 28×22 Female Straight 660201215 - 12×1/2" F 660201510 - 15×3/8" F 660201515 - 15×1/2" F 660201520 - 15×3/4" F 660201525 - 15×1" F 660201815 - 18×1/2" F 660201820 - 18×3/4" F 660202215 - 22×1/2" F 660202220 - 22×3/4" F 660202215 - 22×1" F 660202820 - 28×3/4" F 660202825 - 28×1" F 670200810 - 8×3/8" F 670201010 - 10×3/8" F 670201015 - 10×1/2" F 670201210 - 12×3/8" F 670201215 - 12×1/2" F 670201415 - 14×1/2" F 670201510 - 15×3/8" F 670201515 - 15×1/2" F 670201520 - 15×3/4" F 670201525 - 15×1" F 670201615 - 16×1/2"F 670201620 - 16×3/4" F 670201815 - 18×1/2" F 670201820 - 18×3/4" F 670202215 - 22×1/2" F 670202220 - 22×3/4" F 670202225 - 22×1" F 670202820 - 28×3/4" F 670202825 - 28×1" F 670203532 - 35×1 1/4"F 670204240 - 42×1 1/2" F 670205450 - 54×2" F Male Straight: 670301510 - 15×3/8"M 670301515 - 15×1/2"M 670301520- 15×3/4"M 670301815 - 18×1/2"M 670301820 - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302225- 22×1"M 660302820 - 28×3/4"M 660302825 - 28×1"M 670300806F - 8×1/8"M 670301210F - 12×3/8"M 670301215F - 12×1/2"M 670301410F - 14×3/8"M 670301415F - 14×1/2"M 670301515 - 15×1/2"M 670301520F - 15×3/4"M 670301615F - 16×1/2"M 670301815F - 18×1/2"M 670301820F - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302820F - 28×3/4"M 670302825 - 28×1"M 670303532F - 35×1 1/4"M 670304240F - 42×1 1/2"M Equal Elbow: 6604015 - 15×15 6604018 - 18×18 6604022 - 22×22 6604028 - 28×28 6604035 - 35×35 6604042 - 42×1 1/2"M 6604054 - 54 x 54 6704008 - 8×8 6704010 - 10×10 6704012 - 12×12 6704014 - 14×14 6704015 - 15×15 6704016 - 16×16 6704018 - 18×18 6704022 - 22×22 6704028 - 28×28 6704035 - 35×35 6704042 - 42x42 6704054 - 54x54 Female Elbow: 670501215 - 12×1/2"F 670501515 - 15×1/2"F 670501520 - 15×3/4"F 670501815 - 18×1/2"F 670501820 - 18×3/4"F 670502215 - 22×1/2"F 670502220 - 22×3/4"F 670582225 - 22×1"F 670502825 - 28×1"F 660501515 - 15×1/2"F 660501520 - 15×3/4"F 660501815 - 18×1/2"F 660501820 - 18×3/4"F 660502215- 22×1/2"F 660502220 - 22×3/4"F 660502225 - 22×1"F 660502825 - 28×1"F Male Elbow: 660601515 - 15×1/2"M 660601520 - 15×3/4"M 660601815 - 18×1/2"M 660601820 - 18×3/4"M 660602215 - 22×1/2"M 660602220 - 22×3/4"M 660602225 - 22×1"M 660602825 - 28×1"M 670601215 - 12×1/2"M 670601415- 14×1/2"M 670601515 - 15×1/2"M 670601520 - 15×3/4"M 670601615 - 16×1/2"M 670601815 - 18×1/2"M 670601820 - 18×3/4"M 670602215 - 22×1/2"M 670602220 - 22×3/4"M 670602225 - 22×1"M 670602825 - 28×1"M Equal Tee: 6608015 - 15×15×15 6608018 - 18×18×18 6608022 - 22×22×22 6608028 - 28×28×28 6608035- 35×35×35 6608042 - 42×42×42 6608054 - 54×54×54 6708010 - 10×10×10 6708012 - 12×12×12 6708014 - 14×14×14 6708015 - 15×15×15 6708016 - 16×16×16 6708018 - 18×18×18 6708022 - 22×22×22 6708028 - 28×28×28 6708035 - 35×35×35 Reducing Tee: 66090152215 - 15×15×22 66090181518 - 18×18×15 66090181815 - 18×15×18 66090221515 - 22×15×15 66090222215- 22×15×22 66090221522 - 22×22×15 66090221822 - 22×22×18 66090282815 - 28×15×28 66090282222 - 28×22×22 66090282822 - 28×22×28 67090152215 -15×15×22 67090181518 - 18×18×15 67090181815 - 18×15×18 67090221515 - 22×15×15 67090222215 - 22×15×22 67090221522 - 22×22×15 67090282815 - 28×15×28 67090282222 - 28×22×22 67090282822 - 28×22×28 Female Tee: 66100151515 - 15×1/2“F 66100181518 - 18×1/2“F 66100182018 - 18×3/4“F 66100221522 - 22×1/2”F 66100222022 - 22×3/4”F 66100282028 - 28×3/4”F 66100282528- 28×1”F 67100151515- 15×1/2“F 67100181518 - 18×1/2“F 67100182018 - 18×3/4“F 67100221522 - 22×1/2”F 67100222022 - 22×3/4”F Wall Plate Elbow: 661101515 - 15×1/2"F 661101815 - 18×1/2"F 661101820 - 18×3/4"F 661102215 - 22×1/2"F 661102220 - 22×3/4"F 671101515 - 15×1/2"F 671102215 - 22×1/2"F 671102220 - 22×3/4"F Stop End: 6607015 - 15 6607018 - 18 6607022 - 22 670708 - 8 6707010 - 10 6707012 - 12 6707015 - 15 6707018 - 18 6707022 - 22 6707028 - 28 Bent Tap Connector: 671301515 - 15×1/2"F 671302220 - 22×3/4"F Crossover Bridge: 6612015 - 15×15 6612018 - 18×18 6612022 - 22×22 6712015 - 15×15 6712022 - 22×22 Where for all models: No suffix = brass body, NP suffix = nickel plated brass,

Product Images

Approval Holder:

Business Key, S.L.

Company Name

Business Key, S.L.

Address

Poligono Industrial Camps d’En Ricart Carrer Comerç, 10 naves 4-9 08780 Pallejà (Barcelona)

Country

Spain

View All Listings by this Company

‘HLBRxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The HLBRTC‐1 tank connector, HLBRSS‐1 and HLBRBS‐1 tap connectors all incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 8-54mm, ¼” - 2” BSP (M) or (F).

Marking:

HL and size on nut or body. DZR brass fittings are also marked CR.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

HLBRRC‐1 Reducing Coupling 10mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 10mm, HLBRRC‐1 Reducing Coupling 15mm x 12mm, HLBRRC‐1 Reducing Coupling 22mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 22mm, HLBRSS‐1 Straight Swivel Tap Connector 15mm x 1/2", HLBRSS‐1 Straight Swivel Tap Connector 15mm x 3/4", HLBRSS‐1 Straight Swivel Tap Connector 22mm x 3/4", HLBRBS‐1 Bent Swivel Tap Connector 15mm x 1/2", HLBRBS‐1 Bent Swivel Tap Connector 22mm x 3/4", HLBRTC‐1 Tank Connector 15mm, HLBRTC‐1 Tank Connector 22mm, HLBRTC‐1 Tank Connector 28mm, HLBRTC‐1 Tank Connector 35mm, HLBRER‐1 Elbow Reducer 22mm x 15mm, HLBRFB‐1 Female Backplate Elbow 15mm x 1/2" female, HLBRFB‐1 Female Backplate Elbow 22mm x 3/4" female, HLBRCN‐1 Compression Nut 15mm, HLBRCN‐1 Compression Nut 22mm, HLBRCN‐1 Compression Nut 28mm, HLBRCC‐1 Compression Cap / Blank Nut 1/2", HLBRCB‐1 Compression Blank Capnut 22mm, HLBRRT‐1 Reducing Tee 15mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 15mm, HLBRRT‐1 Reducing Tee 28mm x 15mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 22mm, HLBRFB‐2 Female Branch Tee 15mm x 15mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 3/4", HLBRFB‐2 Female Branch Tee 28mm x 28mm x 1/2", HLBRFE‐2 Female End Tee 15mm x 1/2" x 15mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 8mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 10mm, HLBRRS‐1 Reducing Set (3 part) 22mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 22mm, HLBRRS‐1 Reducing Set (3 part) 35mm x 22mm, HLBRTA‐1 Tap Adaptor Male x Female 1/2", HLBRBR‐1 Burst Repair Coupling 15mm x 15mm x 80mm, HLBRSC‐1 Straight Coupling 8mm, HLBRSC‐1 Straight Coupling 10mm, HLBRSC‐1 Straight Coupling 15mm, HLBRSC‐1 Straight Coupling 22mm, HLBRSC‐1 Straight Coupling 28mm, HLBRSC‐1 Straight Coupling 35mm, HLBRSC‐1 Straight Coupling 42mm, HLBRSC‐1 Straight Coupling 54mm, HLBRMC‐1 Male Coupling 8mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/2" male, HLBRMC‐1 Male Coupling 10mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/4" male, HLBRMC‐1 Male Coupling 15mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/2" male, HLBRMC‐1 Male Coupling 15mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1/2" male, HLBRMC‐1 Male Coupling 22mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1.1/4" male, HLBRMC‐1 Male Coupling 35mm x 1.1/4" male, HLBRMC‐1 Male Coupling 42mm x 1. 1/2" male, HLBRMC‐1 Male Coupling 54mm x 2" male, HLBRFC‐1 Female Coupling 8mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 3/8" female, HLBRFC‐1 Female Coupling 10mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 3/8" female, HLBRFC‐1 Female Coupling 15mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1/2" female, HLBRFC‐1 Female Coupling 22mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1" female, HLBRFC‐1 Female Coupling 28mm x 1" female , HLBRFC‐1 Female Coupling 35mm x 1.1/4" female, HLBRFC‐1 Female Coupling 42mm x 1.1/2" female, HLBRFC‐1 Female Coupling 54mm x 2" female, HLBRSE‐1 Stop End 8mm, HLBRSE‐1 Stop End 10mm, HLBRSE‐1 Stop End 15mm, HLBRSE‐1 Stop End 22mm, HLBRSE‐1 Stop End 28mm, HLBRSE‐1 Stop End 35mm, HLBRSE‐1 Stop End 42mm, HLBRSE‐1 Stop End 54mm, HLBRIR‐1 Internal Reducer 15mm x 8mm, HLBRIR‐1 Internal Reducer 10mm x 8mm, HLBRIR‐1 Internal Reducer 15mm x 10mm, HLBRIR‐1 Internal Reducer 22mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 22mm, HLBRE‐1 Elbow 8mm, HLBRE‐1 Elbow 10mm, HLBRE‐1 Elbow 15mm, HLBRE‐1 Elbow 22mm, HLBRE‐1 Elbow 28mm, HLBRE‐1 Elbow 35mm, HLBRE‐1 Elbow 42mm, HLBRME‐1 Male Elbow 15mm x 1/2" male, HLBRME‐1 Male Elbow 15mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 1" male, HLBRME‐1 Male Elbow 28mm x 1" male, HLBRFE‐1 Female Elbow 15mm x 1/2" female, HLBRFE‐1 Female Elbow 15mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 1" female, HLBRFE‐1 Female Elbow 28mm x 1" female, HLBRET‐1 Equal Tee 8mm, HLBRET‐1 Equal Tee 10mm, HLBRET‐1 Equal Tee 15mm, HLBRET‐1 Equal Tee 22mm, HLBRET‐1 Equal Tee 28mm, HLBRET‐1 Equal Tee 35mm, HLBRET‐1 Equal Tee 42mm, HLBRET‐1 Equal Tee 54mm.

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

‘3600xx’ range of brass compression fittings for use with copper pipe (manufactured to EN 1057). The 360014 tank connector, 360013 and 360017 tap connectors all incorporate an EPDM washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 6-54mm, ¼” - 2” BSP (M) or (F).

Marking:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on compression nut.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

360003 Compression Straight Connector: 6mm - 54mm, 360004 Compression Reducing Coupler: 10mmx8mm - 28mmx22mm, 360001 Compression Male Coupler: 6mmx1/4" - 54mmx2", 360002 Compression Female Coupler: 6mmx1/4" - 54mmx2", 360013 Compression Straight Tap Connector: 15mmx1/2"- 22mmx3/4", 360014 Compression Tank Connector with Seal: 15mm - 54mm 360015 Compression End Cap Connector: 6mm - 54mm, 360007 Compression Elbow Coupler: 8mm - 54mm, 360016 Compression Elbow Reducing Connector: 22mmx15mm, 360017 Compression Bent Tap Connector: 15mmx1/2"- 22mmx3/4", 360006 Compression Female Elbow Connector: 8mmx1/4" - 54mmx2", 360009 Compression Wall Plate Elbow Coupler: 15mmx1/2" - 22mmx3/4", 360005 Compression Male Elbow Coupler: 8mmx1/4" - 54mmx2", 360008 Compression Equal Tee Coupler: 8mm - 54mm, 360018 Compression Reducing Tee Coupler: 15mmx15mmx22mm - 28mmx28mmx22mm, 360010 Compression Female Tee Coupler: 15mmx15mmx1/2" - 28mmx28mmx1/2".

Product Images

Approval Holder:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

Manufacturer:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

South Coast Sales logo on body. EN 1254 and Size on compression Nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Product Images

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

‘CFxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250915003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech and size on compression nut or body (CF19 and CF20 models only). CR on body of DZR brass fittings.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

CF01 STRAIGHT COUPLINGS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF01L Repair Coupling: 15mm*15mm*82mm, 22mm*22mm*82mm. CF02 ELBOWS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF03 REDUCING COUPLING: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 16mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm, 35mm*22mm, 35mm*28mm. CF04 REDUCING ELBOWS: 10mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 18mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm. CF05 STRAIGHT CONN BSP FI: 8mm*1/4" BSP (F), 8mm*3/8" BSP (F), 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*1/4" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*1/4" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 15mm*1" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*3/4" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF06 ELBOWS BSP FI: 8mm*1/4" BSP (F) , 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF07 STRAIGHT CONN BSP MI: 8mm*1/8" BSP (M), 8mm*1/4" BSP (M), 8mm*3/8" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 18mm*1/2" BSP (M), 18mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 22mm*1 1/4" BSP (M), 28mm*3/4" BSP (M), 28mm*1" BSP (M), 28mm*1 1/4" BSP (M), 35mm*1 1/4" BSP (M), 35mm*1 1/2" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF08 ELBOWS BSP MI: 8mm*1/4" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF10 WALL PLATE ELBOW: 15mm*1/2" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF11 EQUAL TEE: 8mm*8mm*8mm, 10mm*10mm*10mm, 12mm*12mm*12mm, 15mm*15mm*15mm, 22mm*22mm*22mm, 28mm*28mm*28mm, 35mm*35mm*35mm, 42mm*42mm*42mm, 54mm*54mm*54mm. CF12 REDUCING TEE: 15mm*15mm*22mm, 22mm*15mm*15mm, 22mm*15mm*22mm, 22mm*22mm*15mm, 22mm*22mm*18mm, 28mm*22mm*15mm, 28mm*15mm*15mm, 28mm*28mm*15mm, 28mm*15mm*28mm, 28mm*22mm*22mm, 22mm*22mm*28mm, 28mm*28mm*22mm, 28mm*22mm*28mm, 35mm*35mm*15mm, 35mm*35mm*22mm, 35mm*35mm*28mm, 42mm*42mm*15mm, 42mm*42mm*22mm, 42mm*42mm*28mm, 42mm*42mm*35mm, 54mm*54mm*15mm, 54mm*54mm*22mm, 54mm*54mm*28mm, 54mm*54mm*35mm, 54mm*54mm*42mm. CF13 BSP (F)TEE CXCXFI: 10mm*10mm*3/8" BSP (F), 12mm*12mm*3/8" BSP (F), 12mm*12mm*1/2" BSP (F), 15mm*15mm*1/4" BSP (F), 15mm*15mm*1/2" BSP (F), 18mm*18mm*3/4" BSP (F), 22mm*22mm*1/2" BSP (F), 22mm*22mm*3/4" BSP (F), 28mm*28mm*1/2" BSP (F), 28mm*28mm*3/4" BSP (F), 28mm*28mm*1" BSP (F). CF14 STOP ENDS: 8mm, 10mm, 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF15 STRAIGHT TAP CON: 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*3/4" BSP (F). CF16 BENT TAP CONN: 15mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF17 TANK CONNECTORS: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF19 Reducing Set: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm, 35mm*15mm, 35mm*22mm, 35mm*28mm, 42mm*15mm, 42mm*22mm, 42mm*28mm, 42mm*35mm, 54mm*15mm, 54mm*22mm, 54mm*28mm, 54mm*35mm, 54mm*42mm. CF20 RED SET ONE PT: 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm. CF22 Water Tank Connector: 15mm*1/2" BSP (M), 22mm*3/4" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF23 45 degree elbow: 15mm*15mm, 22mm*22mm, 28mm*28mm. CF24 CROSS: 15mm*15mm*15mm*15mm, 22mm*22mm*22mm*22mm.

Product Images

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 6‐25, 6‐26, New Oriental Time Building, 1130 Baizhang Road, Ningbo, Zhejiang

Country

China

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

KPress logo, material and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Product Images

Approval Holder:

Kesanitar GmbH

Company Name

Kesanitar GmbH

Address

Märkische Straße 12, 47809 Krefeld, NRW

Country

Germany

Phone

+49 2151 3624071

General Email

info@kesanitar.com

View All Listings by this Company

5000 series of copper end feed fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

5001A 90° Street bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5002G 90° Bent tap Connector 15mm x ½”, 15mm x ¾”, 22mm x ¾” 5002A 90° Bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5040 45° Street Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5041 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5085 Full Crossover 15mm, 22mm 5086 Partial Crossover 15mm, 22mm 5090 90° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5090R 90° Elbow 22mm x 15mm 5092 90° Street Elbow 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5130 Equal Tee 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5301 End Cap 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5130R Reducing Tee 15mmx22mmx15mm，22mmx15mmx15mm， 22mmx15mmx22mm，22mmx22mmx15mm， 22mmx28mmx22mm，28mmx15mmx15mm， 28mmx15mmx28mm，28mmx22mmx22mm， 28mmx22mmx28mm，28mmx28mmx15mm， 28mmx28mmx22mm，35mmx15mmx35mm， 35mmx22mmx35mm，35mmx28mmx28mm， 35mmx28mmx35mm，42mmx15mmx42mm， 42mmx22mmx42mm，42mmx28mmx42mm， 42mmx35mmx42mm，54mmx15mmx54mm， 54mmx22mmx54mm，54mmx28mmx54mm， 54mmx35mmx54mm，54mmx42mmx54mm 5240 Reducing Coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5421 Metric imperial Coupling 15mm x ½”, 22mm x ¾” 5270 Straight Coupling 15mm， 22mm， 28mm, 35mm, 42mm, 54mm 5243 Fitting reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5359G Straight Tap Connector 15mm x 1/2"，15mm x 3/4"，22mm x 3/4"

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

Range of pre-assembled hydraulic blocks incorporating plate heat exchangers, pressure relief valves set at 3.0 bar, circulation pumps and flow regulators. Maximum working pressure: Primary 2.5bar & secondary 10 bar. Maximum operating temperature 80°C (CH) & 60°C (DHW).

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression.

Marking:

Bosch, model code and other technical information on adhesive label on assembly.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

8-718-684-683.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Manufacturer:

Bosch Thermotechnik GmbH

Company Name

Bosch Thermotechnik GmbH

Address

Sophienstrasse 30 - 32 D-35576 Wetzlar Germany

View All Listings by this Company

Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Alfred Victoria "crown" logo on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

F104M

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Range of floor-standing gas combination boilers, supplied with isolation valves, expansion vessel and a pressure relief valve set at 3.0 bar. Maximum working pressure: Primary circuit 2.5 bar, secondary 10 bar. Maximum operating temperature: Primary 82°C / secondary circuit 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

250904711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression.

Marking:

Worcester on front cover. Worcester and product info on label inside cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2030

Model:

7-731-600-297 Greenstar 8000F 35kW Combi NG, 7-731-600-298 Greenstar 8000F 35kW Combi LPG, 7-731-600-299 Greenstar 8000F 50kW Combi NG, 7-731-600-300 Greenstar 8000F 50kW Combi LPG.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

APATOR, date of manufacture (YYYY) and product information on face of water meter. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: JS 1,6-02 JS 1,6-04 JS 1,6-NK JS 1,6-NKP JS 4-02 JS 4-04 JS 4-NK JS 4-NKP JS 2,5-02 JS 2,5-04 JS 2,5-NK JS 2,5-NKP JS 2,5-G1-02 JS 2,5-G1-04 JS 2,5-G1-NK JS 2,5-G1-NKP Maximum operating temperature 85°C: JS90 1,6-02 JS90 1,6-04 JS90 1,6-NK JS901,6-NKP JS90 2,5-02 JS90 2,5-04 JS90 2,5-NK JS90 2,5-NKP JS90 2,5-G1-02 JS90 2,5-G1-04 JS90 2,5-G1-NK JS90 2,5-G1-NKP JS90 4-02 JS90 4-04 JS90 4-NK JS90 4-NKP

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company