Directory Search Results

Print List

#250404710

Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250404710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) (pump body). 27.4mm or 28mm compresson (adaptors).
Marking:
SHIMGE on body
Installation Requirements:
R001 R415
Expiry date:
30/04/2030
Model:
CA600

Approval Holder:
Shimge Pump Industry (Zhejiang)Co.,Ltd.
Company Name
Shimge Pump Industry (Zhejiang)Co.,Ltd.
Address
No.3 Bihai Street, Eastern New Area, Wenling City, Taizou City Zhejiang Province.
Country
China
Phone
86 17614582624
General Email
pangxiyuan@shimge.com

View All Listings by this Company

Print This Approval


#250402015

Range of shower sets incorporating either a wall elbow or wall elbow with hand shower, (chromium plated brass). The shower holder incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
28490660 & 28490970 - Dornbracht logo on wall cover 27802660, 27802970 & 27803660 - Dornbracht logo on wall cover. Dornbracht logo on shower handset
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
27802660 27802970 27803660 28490660 28490970 Alternative cover plates 2780xYYY – complete shower sets 28490xxx – wall elbows only (part of article 2780xYYY)

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#250408013

Range of overhead shower outlets brass and stainless-steel bodies in various finishes, incorporating stainless steel filter washers and flow regulators. Open outlet use only. Maximum operating temperature 85⁰C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250408013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Coalbrook logo on the upper face
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
XX 4013 YY, XX 4014 YY. XX denotes the name of the product, example CO – Coalbrook. Middle 4 numbers is a numeric code allocated to the model and remains constant. YY denotes the colour finish, examples are but not limited to – BN – Brushed Nickel. CP – Chrome. GM – Gunmetal. BB – Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250402055

Range of wall and ceiling mounted overhead shower outlets, (plastic bodies – various finishes). Both models incorporate a built-in pressure regulator. Maximum operating temperature 85°C. Open outlet use only

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402055
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP M.
Marking:
GROHE logo on showerhead.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
22121xxx - Grohe Rainshower Mono 310. Head shower set 422 mm, 1 spray. 22122xxx - Grohe Rainshower Mono 310. Head shower set ceiling 142 mm, 1 spray. Where xxx denotes finish, and can be replaced by the following: 000 – Chrome KF0 – phantom black

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250404023

Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250404023
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0, 24 523 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set.
Marking:
Hansgrohe on face plate
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
24 520 XX0 24 521 XX0 24 530 XX0 24 531 XX0 24 540 XX0 24 541 XX0 24 550 XX0 24 551 XX0 24 573 180 300190XX 300191XX 300193XX 300194XX 310190XX 310193XX 310194XX 340190XX 340191XX Model added May 2025: 24 523 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240708008

Shower handsets, incorporates a stainless steel strainer washer at the inlet. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240708008
Size:
See models.
Marking:
Aqualisa on handset
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
704340 80mm single mode handset AL060 – ½” BSP (M)

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2301106

Range of shower handsets with plastic bodies.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301106
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Aqualisa on handset.
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
706286 - 65mm matt black one mode handset AL222

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#250408010

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Vantec, Model & WRAS on metal dataplate on body Vantec, size, PN, DN and flow arrow body
Installation Requirements:
R001 R120
Expiry date:
30/04/2030
Model:
VAS602 Size: ½” - 2” BSP (F), NPT (F) or BSPP (F).

Approval Holder:
Vantec Industrial
Company Name
Vantec Industrial
Address
128, City Road, London
Postcode
EC1V 2NX
Country
United Kingdom
Phone
+971543038194
General Email
A.OMER@VANTECINDUST.CO.UK

View All Listings by this Company

Print This Approval


#250408017

Range of Y patterned strainers with a brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” to 2” BSP/BSPT (F) x (F)
Marking:
Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label.
Installation Requirements:
R001 R120
Expiry date:
30/04/2030
Model:
IDC 180210 series comprising of model codes: 180210RR0160404 180210RR0160606 180210RR0160808 180210RR0161010 180210RR0161212 180210RR0161616 180210FF0160404 180210FF0160606 180210FF0160808 180210FF0161010 180210FF0161212 180210FF0161616

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:
Zheijang IDC Fluid Control.
Company Name
Zheijang IDC Fluid Control.
General Email

View All Listings by this Company

Print This Approval


#250402039

Range of strainers with epoxy coated ductile iron bodies and stainless-steel mesh. Maximum working pressure 25 Bar Maximum operating temperature 85°C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN65 – DN150 flanged inlet/outlet
Marking:
Crane logo, PN and temperature on data plate on body. Crane logo, DN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
FM 278W

Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#250402062

Range of strainers with epoxy coated ductile iron bodies and stainless-steel mesh. Maximum working pressure 25 Bar Maximum operating temperature 85°C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN65 – DN150 flanged inlet/outlet
Marking:
Hattersley logo, model, PN and temperature on data plate on body. Hatterlsey logo, Date of Manufacture YYYY, DN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
Fig. 825W (DN65 – DN150)

Approval Holder:
Hattersley
Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#250402038

Range of pressure sensors with stainless steel bodies. Models consist of a sensor and male threaded end. Maximum working pressure: See Models. Maximum operating temperature 90°C.

Section:
1720 Switches
Section Subtitle:
Pressure operated.
WRAS Approval Number:
250402038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¼” BSP (M)
Marking:
Customer Production Number, Sensata Production Number, Production Date, Location Code, Sensata Mark and pressure range laser etched on cover.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
35CP11-15165006YS00H2EC & 35CP11-38165006YS00H2EC: 6 bar, 35CP11-16165109YS00H2EC: 9 bar, 35CP11-11165010YS00H2EC & 35CP11-36165010YS00H2EC:10 bar, 35CP11-12165016YS00H2EC & 35CP11-37165016YS00H2EC: 16 bar, 35CP11-18165025YS00H2EC & 35CP11-39165025YS00H2EC: 25 bar, 35CP11-19165040YS00H2EC & 35CP11-40165040YS00H2EC: 40 bar.

Approval Holder:
Sensata Technologies Holland B.V.
Company Name
Sensata Technologies Holland B.V.
Address
Jan Tinbergenstraat 80, 7559 SP Hengelo (O), The Netherlands

View All Listings by this Company
Manufacturer:
Sensata Technologies ( China) Co., Ltd
Company Name
Sensata Technologies ( China) Co., Ltd
Address
18# Chuang Xin Xinbei District Changzhou
Country
Jiangsu

View All Listings by this Company

Print This Approval


#241015016

Wall mounted bib tap with a nickel-plated brass body, chrome plated brass ball, NBR ‘O’-rings and gasket, and PTFE seats. The product incorporates a hose union outlet with an integral plastic flow straightener. Maximum working pressure 20.0 bar. Maximum operating pressure 85°C.

Section:
1750 Taps
Section Subtitle:
Draw off bib tap(s)
WRAS Approval Number:
241015016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) inlet x hose union outlet (Ø15mm).
Marking:
GALA on body.
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
4304

Approval Holder:
GALA RS INC
Company Name
GALA RS INC
Address
8605 SANTA MONICA BLVD 30327 WEST HOLLYWOOD,CA 90069
Country
United States

View All Listings by this Company

Print This Approval


#250415016

Drain off cock with a DZR brass body, non-rising spindle headwork and EPDM seals and washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
250415016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm spigot connection
Marking:
Taizhou Double Winners Copper Co., Ltd logo (dbw), size, date of manufacture (MM-YY), CR and BS 2879-2 on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
6850015
Product Images

Approval Holder:
Taizhou Double Winners Copper Co., Ltd
Company Name
Taizhou Double Winners Copper Co., Ltd
Address
#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Print This Approval


#250415007

Range of pillar taps with brass bodies (chromium plated) incorporating either a quarter turn ceramic disc headworks with single lever operating members (TAP9013 model) or non-rising spindle headwork with dome type operating members (TAP1118 model). The spout outlets incorporate a plastic flow straingtener. The products are supplied with metal backnuts. Maximum working pressure 5.5 bar. Maximum operating temperature 70°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
250415007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
NSS and production date (DmYY) on body. (Where the day ‘D’ is represented by alphanumeric characters, 1-10, then A to H = 11 to 18, J to N = 19 to 23, P to T = 24 to 28, V to W = 29 to 30 and X = 31, month ‘m’ is denoted by a letter, a = January, b = February, c = March, d = April, e = May, f = June, g = July, h = August, j = September, k = October, m = November, n = December, and year ‘YY’ is numeric, e.g. 8a25 = 8th January 2025).
Installation Requirements:
R001 R006
Expiry date:
30/04/2030
Model:
TAP1118, TAP9013.
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company
Manufacturer:
Ningbo Swan Sanitary Co., Ltd.
Company Name
Ningbo Swan Sanitary Co., Ltd.
Address
Taoyuan Village, Hengjie Town, Haishu District, Ningbo City
Country
China
General Email

View All Listings by this Company

Print This Approval


#250803003

Range of Pillar taps (chrome plated brass) bodies incorporating non-rising spindle headworks with cross top operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
250803003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½ BSP (M) ¾ BSP (M)
Marking:
C02058 & C02059 - ‘Saracen’ logo (brand of Wolseley) on operating member. C58109 & C58110 - ‘Swan’ logo (brand of Wolseley) on operating member.
Installation Requirements:
R001 R006
Expiry date:
31/08/2030
Model:
C58109 & C02058 1/2 C C58110 & C02059 3/4 C

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#250403013

Range of pillar taps (chrome plated brass bodies), incorporating non-rising spindle headworks with dome type operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
250403013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) & ¾” BSP (M)
Marking:
C02049 & C02050 - ‘Saracen’ logo (brand of Wolseley) on operating member. C58100 & C58101 - ‘Swan’ logo (brand of Wolseley) on operating member.
Installation Requirements:
R001 R005
Expiry date:
30/04/2030
Model:
C58100 & C02049 ½ C MT C58101 & C02050 ¾ C MT

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#250402708

Range of Single Layer PPRCT Solid Pipes (SDR7.4) comprising of green coloured PPRCT material. Not approved for use with any fittings. Maximum working pressure 23.4 bar. Cold water above ground use only.

Section:
1840 Tubes
Section Subtitle:
Plastic, cold-water use.
WRAS Approval Number:
250402708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SEE MODEL
Marking:
Q-Therm, Size, date of manufacture (DD/MM/YY) and technical info on pipe.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
CT17SP2001 – 20x2.8mm CT17SP2002 – 25x3.5mm CT17SP2003 – 32x4.4mm CT17SP2004 – 40x5.5mm CT17SP2005 – 50x6.9mm CT17SP2006 – 63x8.6mm CT17SP2007 – 75x10.3mm CT17SP2009 – 90x12.3mm CT17SP2010 – 110x15.1mm

Approval Holder:
Quantum Industries LLC
Company Name
Quantum Industries LLC
Address
Al Ghail Industrial Park, Ras Al Khaimah, PB 86488
Country
UAE

View All Listings by this Company

Print This Approval


#250702003

Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 65.0°C. Open outlet use only.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250702003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP captive nut connection inlet x outlet
Marking:
Hansgrohe or AXOR (brand of Hansgrohe) on captive nut.
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
28 278 xx0 hansgrohe Isiflex 30 7237 xx hansgrohe Isiflex 30 3308 xx hansgrohe Isiflex 28 272 xx0 hansgrohe Isiflex 30 3312 xx hansgrohe Isiflex 30 1820 xx hansgrohe Isiflex 33 1820 xx hansgrohe Isiflex 28 622 xx0 AXOR 28 712 xx2 hansgrohe Isiflex 30 3315 xx hansgrohe Isiflex 31 9221 xx hansgrohe Isiflex 33 9221 xx hansgrohe Isiflex 28 276 xx0 hansgrohe Isiflex 30 3215 xx AXOR 28 626 xx0 AXOR 30 3316 xx hansgrohe Isiflex 33 1821 xx hansgrohe Isiflex 30 1821 xx hansgrohe Isiflex 34 1821 xx hansgrohe Isiflex 36 1821 xx hansgrohe Isiflex 28 713 xx2 hansgrohe Isiflex 30 2130 xx hansgrohe Isiflex 33 2130 xx hansgrohe Isiflex 30 3317 xx hansgrohe Isiflex 32 2130 xx hansgrohe Isiflex 28 274 xxx hansgrohe Isiflex 30 1822 xx hansgrohe Isiflex 30 8996 xx hansgrohe Isiflex 28 624 xx0 AXOR 31 1822 xx hansgrohe Isiflex 30 3320 xx hansgrohe Isiflex Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250404005

Range of stainless steel or polymeric braided, PERT and LDPE lined flexible hose assemblies with EPDM O-rings. Available with a variety of end connections for each size and model. Compression connection to be used with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250404005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
TUCAI, NT, WRAS, DN, YY (year of manufacture)
Installation Requirements:
R001 R008
Expiry date:
30/04/2030
Model:
TAQ SLIM DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 8.3mm, stainless steel braided assemblies with a variety of end connections. TAQ SLIM ACB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 8.3mm, polymeric braided (ACB) assemblies with a variety of end connections TAQ SLIM BB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 10mm = BB, stainless steel braided assemblies with a variety of end connections TAQ SLIM BB ACB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 10mm = BB, polymeric braided (ACB) assemblies with a variety of end connections Fittings for all above models: M8X1 M10X1 M11X1 M12X1 M15X1 9/16-24UNEF 1/2-14NPSM G3/8 G1/2 5/16-24UNF LISO6 LISO8 LISO10 CLIP 9 CLIP 10 CLIP 11 BICO8 BICO10

Approval Holder:
Tucai, S.A.
Company Name
Tucai, S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:
Ningbo Tucai Flexible Pipe Co., Ltd.
Company Name
Ningbo Tucai Flexible Pipe Co., Ltd.
Address
No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450
Country
China
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 343 of 390

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.