VSH XPRESS Range of ‘M’ profile stainless steel press fittings with EPDM ‘O’-rings for use with VSH SudoXPress stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of brass compression fittings for use with copper pipes (manufactured to EN 1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Models codes CXC & CXRC X = "C" for Chrome plated or "O" for Brass.
Plastic bodied push fit fittings for use with Shin Won Tube Co., Ltd. SWPE™ (LLDPE) tube, (not covered by the scope of this approval). Maximum working pressure 10.0 bar. Cold water use only.
Range of bronze end feed fittings for use with copper pipe (manufactured to EN1057) 15mm - 54mm fittings have a maximum working pressure of 25.0 bar. 67mm - 108mm fittings have a maximum working pressure of 16.0 bar. Maximum operating temperature 100°C. Above ground use only.
Range of heat interface units with copper brazed, stainless-steel heat exchangers, providing heating and instantaneous hot water. The product incorporates an expansion vessel, a safety relief valve on the heating circuit set @ 3.0 bar and another on the cold-water inlet set @ 10.0 bar. Maximum working pressures: Primary: 16.0 bar Heating circuit: 2.5 bar Secondary: 9.5 bar Maximum operating temperatures: Primary: 90.0°C Heating circuit: 85.0°C Secondary: 60.0°C
Range of ultrasonic water meters incorporating a brass or plastic (-C suffix models only) body. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of pressure sensors with stainless steel bodies, EPDM ‘O’-ring and ceramic measuring cell. Maximum working pressure 25.0 bar. Cold water use only.
Range of pressure transmitters with stainless steel bodies. The DST P140 G1/4 A (with O-ring) model also incorporates an EPDM ‘O’-ring. Maximum working pressure 50.0 bar. Maximum operating temperatures: DST P140 G1/4 A (with O-ring): 85°C, All other models: 90°C.
Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.
Range of pressure transmitters with stainless steel bodies. Maximum working pressure 50.0 bar. Maximum operating temperatures 90°C.
Range of cast iron (blue epoxy coated) (G versions only) or stainless steel (all other versions - F, N, R, T) vertical multistage pumps with stainless steel impellers, shaft and outer sleeve. Maximum working pressures: 16 bar, 25 bar and 40 bar. Oval flanges - Body type ‘T’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 16 bar. Round flanges - Body type ‘R’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 25 bar. Round flanges - Body type ‘F’ (1SV-3SV) - 25 bar. Round flanges - Body type ‘N’ (10SV) - 25 bar. Round flanges - Body type ‘N’ (66SV-92SV) - 16 bar. Round flanges - Body type ‘G’ (33SV, 46SV) - 40 bar. Round flanges - Body type ‘G’ (33SV, 46SV, 66SV-92SV, 125SV) - 16 bar. Round flanges - Body type ‘G’ (125SV) - 25 bar. Cold water use only.
Range of electronic booster pumps with variable speed, incorporating stainless-steel bodies, impellers and shaft, EPDM gaskets and seals and an expansion vessel on the outlet. The pumps incorporate a drain port. Maximum working pressure 10.0 bar. Cold water use only.
Range of circulating pumps, with plastic or stainless steel (cast EN 1.4308) bodies and a plastic impeller. Maximum working pressures: Stainless steel bodied pumps 10.0 bar, Plastic bodied pumps 3.0 bar. Maximum operating temperature 95°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 26.866.xxx | Various | 1/2" BSP (M) | Open outlet bar | 65 °C | Grohe | Body | No | Flow Regulator Fitted, Handset, |
Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite GL0 – cool sunrise EN0 – brushed nickel DL0 – brushed warm sunset GN0 – brushed cool sunrise A00 – hard graphite MS0 – satin steel MG0 – satin graphite BE0- polished nickel
Range of shower handsets and shower heads with (plastic bodies - various finishes) Some models incorporate a plastic flow restrictor, or a check valve with built in flow regulator (however, the complete product has not been fully tested to demonstrate it provides backflow protection) or neither (See models for FR or WSCV). Maximum operating temperature 60.0°C Open outlet use only
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Gaia 200 Overhead - 1589805 | White/Chrome | 15mm | Open Outlet bar | 50 °C | Kohler Mira Limited | "Kohler Mira Limited" on top of overheads | No | No | Not Applicable | Not Applicable | |
| Gaia 200 Overhead - 1621057 | Black/White | 15mm | Open Outlet bar | 50 °C | Kohler Mira Limited | "Kohler Mira Limited" on top of overheads | No | No | Not Applicable | Not Applicable | |
| 100 FOKUS HANDSET - 1555570 | CHROME | 15mm | Open Outlet bar | 50 °C | Mira Showers | “Mira Showers” logo on front lower handset | No | No | Not Applicable | Not Applicable | Handset, |
| 100 FOKUS HANDSET - 1555588 | BLACK | 15mm | Open Outlet bar | 50 °C | Mira Showers | “Mira Showers” logo on front lower handset | No | No | Not Applicable | Not Applicable | Handset, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AOOSCPUK | Chrome | 1/2" BSP (F) | 0 bar | 60 °C | Methven | on shower handset. | No | Handset, | |||
| AOOSBKUK | Black | 1/2" BSP (F) | 0 bar | 60 °C | Methven | on shower handset. | No | Handset, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1001450AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, | |||
| 1001447AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, | |||
| 1001445AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, |
Fixed Head in 4 different colours - Chrome, Matt Black, Brushed Brass and Gunmetal Grey AQ = Aqualisa XX = AA , AD , AJ , AH AQAA - Chrome AQAD - Matt Black AQAJ - Gunmetal Grey AQAH - Brushed Brass
Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61408 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61108 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 51508AQ | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
Page 323 of 326
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
