Range of wall mounted spout outlets with (brass bodies - various finishes) incorporating a plastic aerator in the outlet. Open outlet use only. Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240902008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Villeroy & Boch Logo on spout

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

TVW126005000xx 61 = Chrome , 74 = Brushed Chrome, 63 = Graphite, 64 = Brushed Nickel matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, 70 = Dune, K5 = Matt black

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of spout outlets (brass bodies – various finishes) incorporating a plastic aerator. The product is also supplied with metal backnuts. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240902048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)

Marking:

VoleVatch on base of Spout

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

B/B1-B6-00

Approval Holder:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Manufacturer:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models SMTFW-SLSS / SMTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2205101

Note:

Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.

Marking:

Spectrum on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/05/2027

Model:

SMSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) SMTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) SMTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT)

Approval Holder:

Spectrum

Company Name

Spectrum

Address

20/20 Business Park, Maidstone, Kent

Postcode

ME16 0LS

Country

United Kingdom

Phone

01622621940

General Email

jasmine@fileder.co.uk

View All Listings by this Company

Range of fohn stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with FOHN stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303394

Size:

see model

Marking:

FOHN (brand of KONTUR EESTI OÜ), size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler S15х1/2"W – 15 x 15mm S15х3/4"W – 15 x 15mm S18х1/2"W – 18 x 18mm S18х3/4"W – 18 x 18mm S22х1/2"W – 22 x 22mm S22х3/4"W – 22 x 22mm S22х1"W – 22 x 22mm S28х3/4"W – 28 x 28mm S28x1"W – 28 x 28mm S35x1"W – 35 x 35mm S35x1 1/4"W – 35 x 35mm S42х1 1/2"W – 42 x 42mm S54х2"W – 54 x 54mm Male threaded coupler with straight pipe 15х1/2"W – 15 x 15mm 15x3/4"W – 15 x 15mm 18х1/2"W – 18 x 18mm 18х3/4"W – 18 x 18mm 18x1"W – 18 x 18mm 22х1/2"W – 22 x 22mm 22х3/4"W – 22 x 22mm 22x1"W – 22 x 22mm 28х3/4"W – 28 x 28MM 28х1"W – 28 x 28mm 35х1 1/4"W – 35 x 35mm 42х1 1/2"W – 42 x 42mm 54х2"W – 54 x 54mm Female threaded coupler S15х1/2"N – 15 x 15mm S18х1/2"N – 18 x 18mm S18х3/4"N – 18 x 18mm S22х1/2"N – 22 x 22mm S22х3/4"N – 22 x 22mm S28х3/4"N – 28 x 28mm S28х1"N – 28 x 28mm S35x1"N – 35 x 35mm S35x1 1/4"N – 35 x 35mm S42х1 1/2"N – 42 x 42mm S54х2"N – 54 x 54mm Female threaded coupler with straight pipe 15х1/2"N – 15 x 15mm 15x3/4"N – 15 x 15mm 18х1/2"N – 18 x 18mm 18х3/4"N – 18 x 18mm 18x1"N – 18 x 18mm 22х1/2"N – 22 x 22mm 22х3/4"N – 22 x 22mm 22x1"N – 22 x 22mm 28х3/4"N – 28 x 28mm 28х1"N – 28 x 28mm 35х1 1/4"N – 35 x 35mm 42х1 1/2"N – 42 x 42mm 54х2"N – 54 x 54mm Coupler S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S18х15Ⅱ – 15 x 15mm S22х15Ⅱ – 15 x 15mm S22х18Ⅱ – 18 x 18mm S28х15Ⅱ – 15 x 15mm S28х18Ⅱ – 18 x 18mm S28х22Ⅱ – 22 x 22mm S35х15Ⅱ – 15 x 15mm S35х18Ⅱ – 18 x 18mm S35х22Ⅱ – 22 x 22mm S35х28Ⅱ – 28 x 28mm S42х22Ⅱ – 22 x 22mm S42х28Ⅱ – 28 x 28mm S42х35Ⅱ – 35 x 35mm S54х28Ⅱ – 28 x 28mm S54х35Ⅱ – 35 x 35mm S54х42Ⅱ – 42 x 42mm Adjustable connector S15Ⅱ – 15 x 15mm S18Ⅱ – 18 x 18mm S22Ⅱ – 22 x 22mm S28Ⅱ – 28 x 28mm S35Ⅱ – 35 x 35mm S42Ⅱ – 42 x 42mm S54Ⅱ – 54 x 54mm Union H15х1/2" – 15 x 15mm H15х3/4" – 15 x 15mm H18х1/2" – 18 x 18mm H18х3/4" – 18 x 18mm H22х1/2" – 22 x 22mm H22х3/4" – 22 x 22mm H28х3/4" – 28 x 28mm H28х1" – 28 x 28mm H35x1" – 35 x 35mm H35x1 1/4" – 35 x 35mm H42х1 1/2" – 42 x 42mm H54х2" – 54 x 54mm Tee T15 – 15 x 15mm T18х15х18 – 18 x 18mm T18 – 18 x 18mm T22х18х22 – 22 x 22mm T22х15х22 – 22 x 22mm T22 – 22 x 22mm T28x15x28 – 28 x 28mm T28х22х22 – 28 x 28mm T28x22x28 – 28 x 28mm T28 – 28 x 28mm T35x15x35 – 35 x 35mm T35x22x35 – 35 x 35mm T35x28x35 – 35 x 35mm T35 – 35 x 35mm T42х35х42 – 42 x 42mm T42 – 42 x 42mm T54х42х54 – 54 x 54mm T54 – 54 x 54mm Female threaded Tee T15х1/2"Nx15 – 15 x 15mm T18х1/2"Nx18 – 18 x 18mm T18х3/4"Nx18 – 18 x 18mm T22х1/2"Nx22 – 22 x 22mm T22х3/4"Nx22 – 22 x 22mm T28х1/2"Nx28 – 28 x 28mm T28х3/4"Nx28 – 28 x 28mm T28х1"Nx28 – 28 x 28mm T35х1"Nx35 – 35 x 35mm T35х1 1/4"Nx35 – 35 x 35mm T42х1 1/2"Nх42 – 42 x 42mm T54х2"Nх54 – 54 x 54mm Male threaded Tee T15х1/2"Wx15 – 15 x 15mm T18х1/2"Wx18 – 18 x 18mm T18х3/4"Wx18 – 18 x 18mm T22х1/2"Wx22 – 22 x 22mm T22х3/4"Wx22 – 22 x 22mm T28х1/2"Wx28 – 28 x 28mm T28х3/4"Wx28 – 28 x 28mm T28х1"Wx28 – 28 x 28mm T35х1"Wx35 – 35 x 35mm T35х1 1/4"Wx35 – 35 x 35mm T42х1 1/2"Wх42 – 35 x 35mm T54х2"Wх54 – 54 x 54mm 90°B Elbow L15a – 15 x 15mm L18а – 18 x 18mm L22a – 22 x 22mm L28a – 28 x 28mm L35a – 35 x 35mm L42а – 42 x 42mm L54а – 54 x 54mm 90°A Elbow L15 – 15 x 15mm L18 – 18 x 18mm L22 – 22 x 22mm L28 – 28 x 28mm L35 – 35 x 35mm L42 – 42 x 42mm L54 – 54 x 54mm Female threaded elbow L15х1/2"N – 15 x 15mm L18х1/2"N – 18 x 18mm L18х3/4"N – 18 x 18mm L22х1/2"N – 22 x 22mm L22х3/4"N – 22 x 22mm L28х3/4"N – 28 x 28mm L35х1"N – 35 x 35mm Male threaded elbow L15x1/2"W – 15 x 15mm L18х1/2"W – 18 x 18mm L18х3/4"W – 15 x 15mm L22x1/2"W – 22 x 22mm L22x3/4"W – 22 x 22mm L28x3/4"W – 28 x 28mm L35x1"W – 35 x 35mm Female threaded elbow with base L15х1/2"N(a) – 15 x 15mm L18х1/2"N(a) – 18 x 18mm L22х1/2"N(a) – 22 x 22mm L22х3/4"N(a) – 22 x 22mm 45°B Elbow 45°L15a – 15 x 15mm 45°L18а – 18 x 18mm 45°L22a – 22 x 22mm 45°L28a – 28 x 28mm 45°L35a – 35 x 35mm 45°L42а – 42 x 42mm 45°L54а – 54 x 54mm 45°A Elbow 45°L15 – 15 x 15mm 45°L18 – 18 x 18mm 45°L22 – 22 x 22mm 45°L28 – 28 x 28mm 45°L35 – 35 x 35mm 45°L42 – 42 x 42mm 45°L54 – 54 x 54mm One end pipe bridge Ω15a – 15 x 15mm Ω18a – 18 x 18mm Ω22a – 22 x 22mm Pipe Bridge Ω15 – 15 x 15mm Ω18 – 18 x 18mm Ω22 – 22 x 22mm Ω28 – 28 x 28mm Cap D15 – 15 x 15mm D18 – 18 x 18mm D22 – 22 x 22mm D28 – 28 x 28mm D35 – 35 x 35mm D42 – 42 x 42mm D54 – 54 x 54mm Pipe Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm

Approval Holder:

KONTUR EESTI OÜ

Company Name

KONTUR EESTI OÜ

Address

Türi tn 10d, Tallinn, 11313, Harju maakond

Country

Estonia

View All Listings by this Company

TP range of capillary solder ring copper fittings for use with copper tube EN1057, for above ground use only. Maximum working pressure: 25.0 bar. Maximum operating temperature: 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404065

Size:

see models

Marking:

TPX & size etched on body

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLER TP0108 8mm, TP0110 10mm, TP0112 12mm, TP0115 15mm, TP0122 22mm, TP0128 28mm, TP0135 35mm, TP0142 42mm, TP0154 54mm. SLIP COUPLER TP01S15 15mm, TP01S22 22mm, TP01S28 28mm, REDCUED COUPLER TP01R1008 10mm x 8mm, TP01R1508 15mm x 8mm, TP01R1510 15mm x 10mm, TP01R1512 15mm x 12mm, TP01R2210 2mm x 10mm, TP01R2215 22mm x 15mm, TP01R2815 28mm x 15mm, TP01R2822 28mm x 22mm, TP01R3522 35mm x 22mm, TP01R3528 35mm x 28mm, TP01R4235 42mm x 35mm, TP01R5442 54mm x 42mm. 90° Elbow TP1208 8mm, TP1210 10mm, TP1212 12mm, TP1215 15mm, TP1222 22mm, TP1228 28mm, TP1235 35mm, TP1242 42mm, TP1254 54mm. STREET ELBOW TP12S15 15mm, TP12S22 22mm, TP12S28 28mm, 45° ELBOW TP2115 15mm, TP2122 22mm, TP2128 28mm, TP2135 35mm, TP2142 42mm, TP2154 54mm. FITTING REDUCER TP061008 10mm x 8mm, TP061508 15mm x 8mm, TP061510 15mm x 10mm, TP061512 15mm x 12mm, TP062212 22mm x 12mm, TP062215 22mm x 15mm, TP062815 28mm x 15mm, TP062822 28mm x 22mm, TP063515 35mm x 15mm, TP063522 35mm x 22mm, TP063528 35mm x 28mm, TP064215 42mm x 15mm, TP064222 42mm x 22mm, TP064228 42mm x 28mm, TP064235 42mm x 35mm, TP065415 54mm x 15mm, TP065422 54mm x 22mm, TP065428 54mm x 28mm, TP065435 54mm x 35mm, TP065442 54mm x 42mm STOP END 10mm, TP6110 12mm, TP6112 15mm, TP6115 22mm, TP6122 28mm, TP6128 35mm, TP6135 42mm, TP6142 54mm. TP6154 EQUAL TEE TP2408 8mm, TP2410 10mm, TP2412 12mm, TP2415 15mm, TP2422 22mm, TP2428 28mm, TP2435 35mm, TP2442 42mm, TP2454 54mm TEE - REDUCED BOTH ENDS TP25222215 22mm x 22mm x 15mm, TP25282815 28mm x 28mm x 15mm, TP25282822 28mm x 28mm x 22mm, TP25353515 35mm x 35mm x 15mm, TP25353522 35mm x 35mm x 22mm, TP25353528 35mm x 35mm x 28mm, TP25424215 42mm x 42mm x 15mm, TP25424222 42mm x 42mm x 22mm, TP25424228 42mm x 42mm x 28mm, TP25424235 42mm x 42mm x 35mm, TP25545415 54mm x 54mm x 15mm, TP25545422 54mm x 54mm x 22mm, TP25545428 54mm x 54mm x 28mm, TP25545435 54mm x 54mm x 35mm, TP25545442 54mm x 54mm x 42mm,

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of plastic compression fittings incorporating polypropylene bodies& plastic pipe liners.. For use with both PE80 & PE100 pipe manufactured to BS EN 12201. Maximum working pressure 16 Bar Maximum operating temperature 23°C

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

For connection sizes (XX) see models. For connection types, see below: IQ401 – XXmm Comp x XX BSP (F) IQ410 – XXmm Comp x XXmm Compression IQ411 – XXmm Comp x XX BSP (M) IQ412 – XXmm Comp x XXmm Compression IQ413 – XXmm Comp x XXmm Compression IQ414 – XXmm Comp x XXmm Compression x XXmm Compression IQ415 – XXmm Comp x XXmm Compression x XX BSP (M) IQ416 – XXmm Comp x XXmm Compression x XX BSP (F) IQ418 – XXmm Comp x XX BSP (F) IQ419 – XXmm Comp x XX BSP (M) IQ421 – XXmm Comp x Outlet IQ423 – XXmm Comp x XX BSP (F) IQ424 – XXmm Comp x XXmm Compression x XXmm Compression IQ440 – XXmm Comp x XXmm Compression

Marking:

Irritec, size & PN on nut. Date of manufacture (MM/YY) & Size on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

IQ40120F0U20B – 20x1/2'' IQ40120F0U20BXBU - 20x1/2'' IQ40120F0U20C - 20x3/4'' IQ40120F0U20CXBU - 20x3/4'' IQ40120F0U25B - 25x1/2'' IQ40120F0U25BXBU - 25x1/2'' IQ40120F0U25C - 25x3/4'' IQ40120F0U25CXBU - 25x3/4'' IQ40120F0U25D - 25x1'' IQ40120F0U25DXBU - 25x1'' IQ40120F0U32B - 32x1/2'' IQ40120F0U32C - 32x3/4'' IQ40120F0U32CXBU - 32x3/4'' IQ40120F0U32D - 32x1'' IQ40120F0U32DXBU - 32x1'' IQ40120F0U32E - 32x1''1/4 IQ40120F0U32EXBU - 32x1''1/4 IQ40120F0U40D - 40x1'' IQ40120F0U40DXBU - 40x1'' IQ40120F0U40E - 40x1''1/4 IQ40120F0U40EXBU - 40x1''1/4 IQ40120F0U40F - 40x1''1/2 IQ40120F0U40FXBU - 40x1''1/2 IQ40120F0U50E - 50x1''1/4 IQ40120F0U50EXBU - 50x1''1/4 IQ40120F0U50F - 50x1''1/2 IQ40120F0U50FXBU - 50x1''1/2 IQ40120F0U50G - 50x2'' IQ40120F0U50GXBU - 50x2'' IQ40120F0U63E - 63x1''1/4 IQ40120F0U63EXBU - 63x1''1/4 IQ40120F0U63F - 63x1''1/2 IQ40120F0U63FXBU - 63x1''1/2 IQ40120F0U63G - 63x2'' IQ40120F0U63GXBU - 63x2'' IQ4102000U200 - 20 IQ4102000U200XBU - 20 IQ4102000U250 - 25 IQ4102000U250XBU - 25 IQ4102000U320 - 32 IQ4102000U320XBU - 32 IQ4102000U400 - 40 IQ4102000U400XBU - 40 IQ4102000U500 - 50 IQ4102000U500XBU - 50 IQ4102000U630 - 63 IQ4102000U630XBU - 63 IQ41120M0U20B - 20x1/2'' IQ41120M0U20BXBU - 20x1/2'' IQ41120M0U20C - 20x3/4'' IQ41120M0U20CXBU - 20x3/4'' IQ41120M0U25B - 25x1/2'' IQ41120M0U25BXBU - 25x1/2'' IQ41120M0U25C - 25x3/4'' IQ41120M0U25CXBU - 25x3/4'' IQ41120M0U25D - 25x1'' IQ41120M0U25DXBU - 25x1'' IQ41120M0U32C - 32x3/4'' IQ41120M0U32CXBU - 32x3/4'' IQ41120M0U32D - 32x1'' IQ41120M0U32DXBU - 32x1'' IQ41120M0U32E - 32x1''1/4 IQ41120M0U32EXBU - 32x1''1/4 IQ41120M0U40D - 40x1'' IQ41120M0U40DXBU - 40x1'' IQ41120M0U40E - 40x1''1/4 IQ41120M0U40EXBU - 40x1''1/4 IQ41120M0U40F - 40x1''1/2 IQ41120M0U40FXBU - 40x1''1/2 IQ41120M0U50E - 50x1''1/4 IQ41120M0U50EXBU - 50x1''1/4 IQ41120M0U50F - 50x1''1/2 IQ41120M0U50FXBU - 50x1''1/2 IQ41120M0U50G - 50x2'' IQ41120M0U50GXBU - 50x2'' IQ41120M0U63F - 63x1''1/2 IQ41120M0U63FXBU - 63x1''1/2 IQ41120M0U63G - 63x2'' IQ41120M0U63GXBU - 63x2'' IQ4122000U20A - 20x16 IQ4122000U25B - 25x20 IQ4122000U25BXBU - 25x20 IQ4122000U32C - 32x25 IQ4122000U32CXBU - 32x25 IQ4122000U40C - 40x25 IQ4122000U40CXBU - 40x25 IQ4122000U40D - 40x32 IQ4122000U40DXBU - 40x32 IQ4122000U50C - 50x25 IQ4122000U50CXBU - 50x25 IQ4122000U50D - 50x32 IQ4122000U50DXBU - 50x32 IQ4122000U50E - 50x40 IQ4122000U50EXBU - 50x40 IQ4122000U63E - 63x40 IQ4122000U63EXBU - 63x40 IQ4122000U63F - 63x50 IQ4122000U63FXBU - 63x50 IQ4132000U200 - 20 IQ4132000U200XBU - 20 IQ4132000U250 - 25 IQ4132000U250XBU - 25 IQ4132000U320 - 32 IQ4132000U320XBU - 32 IQ4132000U400 - 40 IQ4132000U400XBU - 40 IQ4132000U500 - 50 IQ4132000U500XBU - 50 IQ4132000U630 - 63 IQ4132000U630XBU - 63 IQ4142000U200 - 20 IQ4142000U200XBU - 20 IQ4142000U250 - 25 IQ4142000U250XBU - 25 IQ4142000U320 - 32 IQ4142000U320XBU - 32 IQ4142000U400 - 40 IQ4142000U400XBU - 40 IQ4142000U500 - 50 IQ4142000U500XBU - 50 IQ4142000U630 - 63 IQ4142000U630XBU - 63 IQ41520F0U20B - 20x1/2'' IQ41520F0U20BXBU - 20x1/2'' IQ41520F0U20C - 20x3/4'' IQ41520F0U20CXBU - 20x3/4'' IQ41520F0U25B - 25x1/2'' IQ41520F0U25BXBU - 25x1/2'' IQ41520F0U25C - 25x3/4'' IQ41520F0U25CXBU - 25x3/4'' IQ41520F0U25D - 25x1'' IQ41520F0U25DXBU - 25x1'' IQ41520F0U32B - 32x1/2'' IQ41520F0U32BXBU - 32x1/2'' IQ41520F0U32C - 32x3/4'' IQ41520F0U32CXBU - 32x3/4'' IQ41520F0U32D - 32x1'' IQ41520F0U32DXBU - 32x1'' IQ41520F0U40D - 40x1'' IQ41520F0U40DXBU - 40x1'' IQ41520F0U40E - 40x1''1/4 IQ41520F0U40EXBU - 40x1''1/4 IQ41520F0U40F - 40x1''1/2 IQ41520F0U50E - 50x1''1/4 IQ41520F0U50EXBU - 50x1''1/4 IQ41520F0U50F - 50x1''1/2 IQ41520F0U50FXBU - 50x1''1/2 IQ41520F0U50G - 50x2'' IQ41520F0U50GXBU - 50x2'' IQ41520F0U63F - 63x1''1/2 IQ41520F0U63FXBU - 63x1''1/2 IQ41520F0U63G - 63x2'' IQ41520F0U63GXBU - 63x2'' IQ41620M0U20B - 20x1/2'' IQ41620M0U20BXBU - 20x1/2'' IQ41620M0U20C - 20x3/4'' IQ41620M0U20CXBU - 20x3/4'' IQ41620M0U25B - 25x1/2'' IQ41620M0U25BXBU - 25x1/2'' IQ41620M0U25C - 25x3/4'' IQ41620M0U25CXBU - 25x3/4'' IQ41620M0U25D - 25x1'' IQ41620M0U25DXBU - 25x1'' IQ41620M0U32C - 32x3/4'' IQ41620M0U32CXBU - 32x3/4'' IQ41620M0U32D - 32x1'' IQ41620M0U32DXBU - 32x1'' IQ41620M0U40E - 40x1''1/4 IQ41620M0U40EXBU - 40x1''1/4 IQ41620M0U40F - 40x1''1/2 IQ41620M0U40FXBU - 40x1''1/2 IQ41620M0U50F - 50x1''1/2 IQ41620M0U50FXBU - 50x1''1/2 IQ41620M0U50G - 50x2'' IQ41620M0U50GXBU - 50x2'' IQ41620M0U63G - 63x2'' IQ41620M0U63GXBU - 63x2'' IQ41820F0U20B - 20x1/2'' IQ41820F0U20BXBU - 20x1/2'' IQ41820F0U20C - 20x3/4'' IQ41820F0U20CXBU - 20x3/4'' IQ41820F0U25B - 25x1/2'' IQ41820F0U25BXBU - 25x1/2'' IQ41820F0U25C - 25x3/4'' IQ41820F0U25CXBU - 25x3/4'' IQ41820F0U25D - 25x1'' IQ41820F0U25DXBU - 25x1'' IQ41820F0U32C - 32x3/4'' IQ41820F0U32CXBU - 32x3/4'' IQ41820F0U32D - 32x1'' IQ41820F0U32DX00 - 32x1'' IQ41820F0U32DXBU - 32x1'' IQ41820F0U32E - 32x1''1/4 IQ41820F0U32EXBU - 32x1''1/4 IQ41820F0U40D - 40x1'' IQ41820F0U40DXBU - 40x1'' IQ41820F0U40E - 40x1''1/4 IQ41820F0U40EXBU - 40x1''1/4 IQ41820F0U40F - 40x1''1/2 IQ41820F0U50F - 50x1''1/2 IQ41820F0U50FXBU - 50x1''1/2 IQ41820F0U63F - 63x1''1/2 IQ41820F0U63G - 63x2'' IQ41820F0U63GXBU - 63x2'' IQ41920M0U20B - 20x1/2'' IQ41920M0U20BXBU - 20x1/2'' IQ41920M0U20C - 20x3/4'' IQ41920M0U20CXBU - 20x3/4'' IQ41920M0U25B - 25x1/2'' IQ41920M0U25BXBU - 25x1/2'' IQ41920M0U25C - 25x3/4'' IQ41920M0U25CXBU - 25x3/4'' IQ41920M0U25D - 25x1'' IQ41920M0U25DXBU - 25x1'' IQ41920M0U32C - 32x3/4'' IQ41920M0U32CXBU - 32x3/4'' IQ41920M0U32D - 32x1'' IQ41920M0U32DXBU - 32x1'' IQ41920M0U32E - 32x1''1/4 IQ41920M0U32EXBU - 32x1''1/4 IQ41920M0U40E - 40x1''1/4 IQ41920M0U40EXBU - 40x1''1/4 IQ41920M0U40F - 40x1''1/2 IQ41920M0U40FXBU - 40x1''1/2 IQ41920M0U50F - 50x1''1/2 IQ41920M0U50FXBU - 50x1''1/2 IQ41920M0U50G - 50x2'' IQ41920M0U50GXBU - 50x2'' IQ41920M0U63G - 63x2'' IQ41920M0U63GXBU - 63x2'' IQ4212000U200 - 20 IQ4212000U200XBU - 20 IQ4212000U250 - 25 IQ4212000U250XBU - 25 IQ4212000U320 - 32 IQ4212000U320XBU - 32 IQ4212000U400 - 40 IQ4212000U400XBU - 40 IQ4212000U500 - 50 IQ4212000U500XBU - 50 IQ4212000U630 - 63 IQ4212000U630XBU - 63 IQ42320F0U25C - 25x3/4'' IQ4242000U20A - 20x16x20 IQ4242000U20C - 20x25x20 IQ4242000U20CXBU - 20x25x20 IQ4242000U32C - 32x25x32 IQ4242000U32CXBU - 32x25x32 IQ4242000U40D - 40x32x40 IQ4242000U40DXBU - 40x32x40 IQ4242000U50E - 50x40x50 IQ4242000U50EXBU - 50x40x50 IQ4242000U63F - 63x50x63 IQ4242000U63FXBU - 63x50x63 IQ4402000U200 - 20X20 IQ4402000U250 - 25X25 IQ4402000U320 - 32X32 IQ4402000U400 - 40X40 IQ4402000U400XBU - 40X40 IQ4402000U500 - 50X50 IQ4402000U500XBU - 50X50 IQ4402000U630 - 63X63 IQ4402000U630XBU - 63X63 IQ40120F0P20B - 20x1/2'' IQ40120F0P20C - 20x3/4'' IQ40120F0P25B - 25x1/2'' IQ40120F0P25C - 25x3/4'' IQ40120F0P25D - 25x1'' IQ40120F0P32B -32x1/2'' IQ40120F0P32C -32x3/4'' IQ40120F0P32D -32x1'' IQ40120F0P32E -32x1''1/4 IQ40120F0P40D -40x1'' IQ40120F0P40E -40x1''1/4 IQ40120F0P40F -40x1''1/2 IQ40120F0P50E -50x1''1/4 IQ40120F0P50F -50x1''1/2 IQ40120F0P50G -50x2'' IQ40120F0P63E -63x1''1/4 IQ40120F0P63F -63x1''1/2 IQ40120F0P63G -63x2'' IQ4102000P200 -20 IQ4102000P250 -25 IQ4102000P320 -32 IQ4102000P400 -40 IQ4102000P500 -50 IQ4102000P630 -63 IQ41120M0P20B -20x1/2'' IQ41120M0P20C -20x3/4'' IQ41120M0P25B -25x1/2'' IQ41120M0P25C -25x3/4'' IQ41120M0P25D -25x1'' IQ41120M0P32C -32x3/4'' IQ41120M0P32D -32x1'' IQ41120M0P32E -32x1''1/4 IQ41120M0P40D -40x1'' IQ41120M0P40E -40x1''1/4 IQ41120M0P40F -40x1''1/2 IQ41120M0P50E -50x1''1/4 IQ41120M0P50F -50x1''1/2 IQ41120M0P50G -50x2'' IQ41120M0P63F -63x1''1/2 IQ41120M0P63G -63x2'' IQ4122000P20A -20x16 IQ4122000P25B -25x20 IQ4122000P32C -32x25 IQ4122000P40C -40x25 IQ4122000P40D -40x32 IQ4122000P50C -50x25 IQ4122000P50D -50x32 IQ4122000P50E -50x40 IQ4122000P63E -63x40 IQ4122000P63F -63x50 IQ4132000P200 -20 IQ4132000P250 -25 IQ4132000P320 -32 IQ4132000P400 -40 IQ4132000P500 -50 IQ4132000P630 -63 IQ4142000P200 -20 IQ4142000P250 -25 IQ4142000P320 -32 IQ4142000P400 -40 IQ4142000P500 - 50 IQ4142000P630 - 63 IQ41520F0P20B - 20x1/2'' IQ41520F0P20C - 20x3/4'' IQ41520F0P25B - 25x1/2'' IQ41520F0P25C - 25x3/4'' IQ41520F0P25D - 25x1'' IQ41520F0P32B - 32x1/2'' IQ41520F0P32C - 32x3/4'' IQ41520F0P32D - 32x1'' IQ41520F0P40D - 40x1'' IQ41520F0P40E - 40x1''1/4 IQ41520F0P40F - 40x1''1/2 IQ41520F0P50E - 50x1''1/4 IQ41520F0P50F - 50x1''1/2 IQ41520F0P50G - 50x2'' IQ41520F0P63F - 63x1''1/2 IQ41520F0P63G - 63x2'' IQ41620M0P20B - 20x1/2'' IQ41620M0P20C - 20x3/4'' IQ41620M0P25B - 25x1/2'' IQ41620M0P25C - 25x3/4'' IQ41620M0P25D - 25x1'' IQ41620M0P32C - 32x3/4'' IQ41620M0P32D - 32x1'' IQ41620M0P40E - 40x1''1/4 IQ41620M0P40F - 40x1''1/2 IQ41620M0P50F - 50x1''1/2 IQ41620M0P50G - 50x2'' IQ41620M0P63G - 63x2'' IQ41820F0P20B - 20x1/2'' IQ41820F0P20C - 20x3/4'' IQ41820F0P25B - 25x1/2'' IQ41820F0P25C - 25x3/4'' IQ41820F0P25D - 25x1'' IQ41820F0P32C - 32x3/4'' IQ41820F0P32D - 32x1'' IQ41820F0P32E - 32x1''1/4 IQ41820F0P40D - 40x1'' IQ41820F0P40E - 40x1''1/4 IQ41820F0P40F - 40x1''1/2 IQ41820F0P50F - 50x1''1/2 IQ41820F0P63F - 63x1''1/2 IQ41820F0P63G - 63x2'' IQ41920M0P20B - 20x1/2'' IQ41920M0P20C - 20x3/4'' IQ41920M0P25B - 25x1/2'' IQ41920M0P25C - 25x3/4'' IQ41920M0P25D - 25x1'' IQ41920M0P32C - 32x3/4'' IQ41920M0P32D - 32x1'' IQ41920M0P32E - 32x1''1/4 IQ41920M0P40E - 40x1''1/4 IQ41920M0P40F - 40x1''1/2 IQ41920M0P50F - 50x1''1/2 IQ41920M0P50G - 50x2'' IQ41920M0P63G - 63x2'' IQ4212000P200 - 20 IQ4212000P250 - 25 IQ4212000P320 - 32 IQ4212000P400 - 40 IQ4212000P500 - 50 IQ4212000P630 - 63 IQ42320F0P25C - 25x3/4'' IQ4242000P20A - 20x16x20 IQ4242000P20C - 20x25x20 IQ4242000P32C - 32x25x32 IQ4242000P40D - 40x32x40 IQ4242000P50E - 50x40x50 IQ4242000P63F - 63x50x63 IQ4402000P200 - 20X20 IQ4402000P250 - 25X25 IQ4402000P320 - 32X32 IQ4402000P400 - 40X40 IQ4402000P500 - 50X50 IQ4402000P630 - 63X63

Approval Holder:

Irritec S.p.A

Company Name

Irritec S.p.A

Address

Via G Conforto C Da S Lucia Capo d’Orlando (ME)

Postcode

98071

Country

Italy

General Email

irritec@irritec.com

View All Listings by this Company

Manufacturer:

Irritec S.p.A

Company Name

Irritec S.p.A

Address

Via G Conforto C Da S Lucia Capo d’Orlando (ME)

Postcode

98071

Country

Italy

General Email

irritec@irritec.com

View All Listings by this Company

Range of ‘B’ Press XL copper crimped fittings with EPDM ‘O’-rings for use with copper pipe to BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models Below

Marking:

>‘B’<, Size and DVGW

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

P5001 90° Street Bend P5001 06400000 – 64MM P5001 06700000 – 67MM P5001 07600000 – 76MM P5001 08900000 – 89MM P5001 10800000 – 108MM P5002 90° Bend P5002 06400000 – 64MM P5002 06700000 – 67MM P5002 07600000 – 76MM P5002 08900000 – 89MM P5002 10800000 – 108MM P5040 45° Obtuse Street Elbow P5040 06400000 – 64MM P5040 06700000 – 67MM P5040 07600000 – 76MM P5040 08900000 – 89MM P5040 10800000 – 108MM P5041 45° Obtuse Elbow P5041 06400000 – 64MM P5041 06700000 – 67MM P5041 07600000 – 76MM P5041 08900000 – 89MM P5041 10800000 – 108MM P5130 Equal Tee P5130 06400000 – 64MM P5130 06700000 – 67MM P5130 07600000 – 76MM P5130 08900000 – 89MM P5R 108108108 – 108MM P5130G Tee with Female Branch P5130G06406640 – 64 x ¾” BSP x 64MM P5130G06408640 – 64 x 1” BSP X 64MM P5130G06416640 – 64 x 2” BSP X 64MM P5130G06706670 – 67 x ¾” BSP x 67MM P5130G06716670 – 67 x 2” BSP x 67MM P5130G07606760 – 76 x ¾” BSP x 76MM P5130G07616760 – 76 x 2” BSP x 76MM P5130G08906890 – 89 x ¾” BSP x 89MM P5130G08916890 – 89 x 2” BSP x 89MM P5RG108061080 – 108 x ¾” BSP x 108MM P5RG108161080 – 108 x 2” BSP x 108MM P5130RB Tee Reduced Branch P5130 06435640 – 64 x 35 x 64MM P5130 06442650 – 64 x 42 x 64MM P5130 06454640 – 64 x 54 x 64MM P5130 06728670 – 67 x 28 x 67MM P5130 06735670 – 67 x 35 x 67MM P5130 06742670 – 67 x 42 x 67MM P5130 06754670 – 67 x 54 x 67MM P5130 07628760 – 76 x 28 x 76MM P5130 07635760 – 76 x 35 x 76MM P5130 07642760 – 76 x 42 x 76MM P5130 07654760 – 76 x 54 x 76MM P5130 07664760 – 76 x 64 x 76MM P5130 07667760 – 76 x 67 x 76MM P5130 08954890 – 89 x 54 x 89MM P5130 08964890 – 89 x 64 x 89MM P5130 08976890 – 89 x 76 x 89MM P5R 0108054108 – 108 x 54 x 108MM P5R 0108064108 – 108 x 64 x 108MM P5R 0108076108 – 108 x 76 x 108MM P5R 0108089108 – 108 x 89 x 108MM P5230B Flange 45° P5230B06400000 – 64MM P5230B06700000 – 67MM P5230B07600000 – 76MM P5230 076000UK – 76MM P5230B08900000 – 89MM P5230B10800000 – 108MM P5243 Fitting Reducer P5243 06435000 – 64 x 35MM P5243 06442000 – 64 x 42MM P5243 06454000 – 64 X 54MM P5243 06728000 – 67 x 28MM P5243 06735000 – 67 x 35MM P5243 06742000 – 67 x 42MM P5243 06754000 – 67 x 54MM P5243 07628000 – 76 x 28MM P5243 07635000 – 76 x 35MM P5243 07642000 – 76 x 42MM P5243 07654000 – 76 x 54MM P5243 07664000 – 76 x 64MM P5243 07667000 – 76 x 67MM P5243 08954000 – 89 x 54MM P5243 08964000 – 89 x 64MM P5243 08976000 – 89 x 76MM P5243 10854000 – 108 x 54MM P5243 10864000 – 108 x 64MM P5243 10876000 – 108 x 76MM P5243 10889000 – 108 x 89MM P5243G Male Threaded Straight Connector P5243G064200000 – 64 x 2-1/2” BSP P5243G067200000 – 67 x 2-1/2” BSP P5243G076200000 – 76 x 2-1/2” BSP P5243G076024000 – 76 x 3” BSP P5243G089240000 – 89 x 3” BSP P5243G10832000 – 108 X 4” BSP P5270 Straight Connector P5270 06400000 – 64MM P5270 06700000 – 67MM P5270 07600000 – 76MM P5270 08900000 – 89MM P5270 10800000 – 108MM P5270G Female Threaded Straight Connector P5270G06420000 – 64 x 2-1/2” BSP P5270G06720000 – 67 x 2-1/2” BSP P5270G07620000 – 76 x 2-1/2” BSP P5270G07624000 – 76 x 3” BSP P5270G08924000 – 89 x 3” BSP P5270G10832000 – 108 x 4” BSP P5275 Repair Coupling P5275 06400000 – 64MM P5275 06700000 – 67MM P5275 07600000 – 76MM P5275 08900000 – 89MM P5275 10800000 – 108MM P5301 End Cap P5301 06400000 – 64MM P5301 06700000 – 67MM P5301 07600000 – 76MM P5301 08900000 – 89MM P5301 10800000 – 108MM

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Zhuji City logo and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

100ENM - Copper Press Straight Coupling PxP: 100ENM12AB - 12mm 100ENM15AB - 15mm 100ENM18AB - 18mm 100ENM22AB - 22mm 100ENM28AB - 28mm 100ENM35AB - 35mm 100ENM42AB - 42mm 100ENM54AB - 54mm 100ENM67AB - 66.7mm 100ENM76AB - 76.1mm 100ENM89AB - 88.9mm 100ENM108AB - 108mm 101ENM - Copper Press Reducing Coupling PxP: 101ENM1512AB - 15mm×12mm 101ENM1514AB - 15mm×14mm 101ENM1615AB - 16mm×15mm 101ENM1812AB - 18mm×12mm 101ENM1815AB - 18mm×15mm 101ENM1817AB - 18mm×17mm 101ENM2215AB - 22mm×15mm 101ENM2218AB - 22mm×18mm 101ENM2815AB - 28mm×15mm 101ENM2818AB - 28mm×18mm 101ENM2822AB - 28mm×22mm 101ENM3522AB - 35mm×22mm 101ENM3528AB - 35mm×28mm 101ENM4222AB - 42mm×22mm 101ENM4228AB - 42mm×28mm 101ENM4235AB - 42mm×35mm 101ENM5428AB - 54mm×28mm 101ENM5435AB - 54mm×35mm 101ENM5442AB - 54mm×42mm 101ENM3515AB - 35mmx15mm 101ENM6754AB - 66.7mmx54mm 101ENM7628AB - 76.1x28mm 101ENM6728AB - 66.7x28mm 101ENM6735AB - 66.7x35mm 101ENM6742AB - 66.7x42mm 102ENM - Copper Press Fitting Reducer FTGxP: 102ENM1512AB - 15mm×12mm 102ENM1812AB - 18mm×12 mm 102ENM1815AB - 18mm×15mm 102ENM2215AB - 22mm×15mm 102ENM2218AB - 22mm×18mm 102ENM2815AB - 28mm×15mm 102ENM2818AB - 28mm×18mm 102ENM2822AB - 28mm×22mm 102ENM3522AB - 35mm×22 mm 102ENM3528AB - 35mm×28 mm 102ENM4222AB - 42mm×22mm 102ENM4228AB - 42mm×28mm 102ENM4235AB - 42mm×35mm 102ENM5422AB - 54mmx22mm 102ENM5428AB - 54mm×28mm 102ENM5435AB - 54mm×35mm 102ENM5442AB - 54mm×42mm 102ENM6728AB - 66.7mm×28mm 102ENM6735AB - 66.7mm×35mm 102ENM6742AB - 66.7mm×42mm 102ENM6754AB - 66.7mm×54mm 102ENM7635AB - 76.1mm×35mm 102ENM7642AB - 76.1mm×42mm 102ENM7654AB - 76.1mm×54mm 102ENM7667AB - 76.1mm×66.7mm 102ENM8954AB - 88.9mm×54mm 102ENM8976AB - 88.9mm×76.1mm 102ENM10842AB - 108mm×42mm 102ENM10854AB - 108mm×54mm 102ENM10867AB - 108mm×66.7mm 102ENM10876AB - 108mm×76.1mm 102ENM10889AB - 108mm×88.9mm 103ENM - Copper Press Elbow - 90°PxP: 103ENM12AB - 12mm 103ENM15AB - 15mm 103ENM18AB - 18mm 103ENM22AB - 22mm 103ENM28AB - 28mm 103ENM35AB - 35mm 103ENM42AB - 42mm 103ENM54AB - 54mm 103ENM67AB - 66.7mm 103ENM76AB - 76.1mm 103ENM89AB - 88.9mm 103ENM108AB - 108mm 104ENM - Copper Press Elbow - 90°(Male / Female) FTGxP: 104ENM12AB - 12mm 104ENM15AB - 15mm 104ENM18AB - 18mm 104ENM22AB - 22mm 104ENM28AB - 28mm 104ENM35AB - 35mm 104ENM42AB - 42mm 104ENM54AB - 54mm 104ENM67AB - 66.7mm 104ENM76AB - 76.1mm 104ENM89AB - 88.9mm 104ENM108AB - 108mm 107ENM - Copper Press Elbow - 45°PxP: 107ENM12AB - 12mm 107ENM15AB - 15mm 107ENM18AB - 18mm 107ENM22AB - 22mm 107ENM28AB - 28mm 107ENM35AB - 35mm 107ENM42AB - 42mm 107ENM54AB - 54mm 107ENM67AB - 66.7mm 107ENM76AB - 76.1mm 107ENM89AB - 88.9mm 107ENM108AB - 108mm 108ENM - Copper Press Elbow - 45°(Male / Female) FTGxP: 108ENM12AB - 12mm 108ENM15AB - 15mm 108ENM18AB - 18mm 108ENM22AB - 22mm 108ENM28AB - 28mm 108ENM35AB - 35mm 108ENM42AB - 42mm 108ENM54AB - 54mm 108ENM67AB - 66.7mm 108ENM76AB - 76.1mm 108ENM89AB - 88.9mm 108ENM108AB - 108mm 111ENM - Copper Press Slip Extended Coupling PxP: 111ENM12AL - 12mm 111ENM15AL - 15mm 111ENM18AL - 18mm 111ENM22AL - 22mm 111ENM28AL - 28mm 111ENM35AL - 35mm 111ENM42AL - 42mm 111ENM54AL - 54mm 111ENM67AL - 66.7mm 111ENM76AL - 76.1mm 111ENM89AL - 88.9mm 111ENM108AL - 108mm 112ENM - Copper Press Equal Tee PxPxP: 112ENM12AB - 12mm 112ENM15AB - 15mm 112ENM18AB - 18mm 112ENM22AB - 22mm 112ENM28AB - 28mm 112ENM35AB - 35mm 112ENM42AB - 42mm 112ENM54AB - 54mm 112ENM67AB - 66.7mm 112ENM76AB - 76.1mm 112ENM89AB - 88.9mm 112ENM108AB - 108mm 113ENM - Copper Press Unequal Tee PxPxP: 113ENM151512AB - 15mm×15mm×12mm 113ENM181812AB - 18mm×18mm×12mm 113ENM181815AB - 18mm×18mm×15mm 113ENM222212AB - 22mm×22mm×12mm 113ENM222215AB - 22mm×22mm×15mm 113ENM222218AB - 22mm×22mm×18mm 113ENM282815AB - 28mm×28mm×15mm 113ENM282818AB - 28mm×28mm×18mm 113ENM282822AB - 28mm×28mm×22mm 113ENM353515AB - 35mm×35mm×15mm 113ENM353522AB - 35mm×35mm×22mm 113ENM353528AB - 35mm×35mm×28mm 113ENM424215AB - 42mm×42mm×15mm 113ENM424222AB - 42mm×42mm×22mm 113ENM424228AB - 42mm×42mm×28mm 113ENM424235AB - 42mm×42mm×35mm 113ENM545415AB - 54mm×54mm×15mm 113ENM545422AB - 54mm×54mm×22mm 113ENM545428AB - 54mm×54mm×28mm 113ENM545435AB - 54mm×54mm×35mm 113ENM545442AB - 54mm×54mm×42mm 113ENM676728AB - 66.7mm×66.7mm×28mm 113ENM676735AB - 66.7mm×66.7mm×35mm 113ENM676742AB - 66.7mm×66.7mm×42mm 113ENM676754AB - 66.7mm×66.7mm×54mm 113ENM767622AB - 76.1mm×76.1mm×22mm 113ENM767628AB - 76.1mm×76.1mm×28mm 113ENM767635AB - 76.1mm×76.1mm×35mm 113ENM767642AB - 76.1mm×76.1mm×42mm 113ENM767654AB - 76.1mm×76.1mm×54mm 113ENM767667AB - 76.1mm×76.1mm×66.7mm 113ENM898954AB - 88.9mm×88.9mm×54mm 113ENM898976AB - 88.9mm×88.9mm×76.1mm 113ENM10810854AB - 108mm×108mm×54mm 113ENM10810867AB - 108mm×108mm×66.7mm 113ENM10810876AB - 108mm×108mm×76.1mm 113ENM10810889AB - 108mm×108mm×89mm 114ENM151212AB - 15mm×12mm×12mm 114ENM151215AB - 15mm×12mm×15mm 114ENM181515AB - 18mm×15mm×15mm 114ENM181518AB - 18mm×15mm×18mm 114ENM221515AB - 22mm×15mm×15mm 114ENM221518AB - 22mm×15mm×18mm 114ENM221522AB - 22mm×15mm×22mm 114ENM221818AB - 22mm×18mm×18mm 114ENM221822AB - 22mm×18mm×22mm 114ENM281528AB - 28mm×15mm×28mm 114ENM282215AB - 28mm×22mm×15mm 114ENM282222AB - 28mm×22mm×22mm 114ENM282228AB - 28mm×22mm×28mm 114ENM352822AB - 35mm×28mm×22mm 114ENM352828AB - 35mm×28mm×28mm 114ENM423542AB - 42mm×35mm×42mm 114ENM542854AB - 54mm×28mm×54mm 114ENM221815AB - 22mmx18mmx15mm 115ENM - Copper Press Unequal Tee PxPxP: 115ENM151522AB - 15mm×15mm×22mm 115ENM121215AB - 12mmx12mmx15mm 115ENM222228AB - 22mmx22mmx28mm 121ENM - Copper Press Reducing Elbow - 90°PxP: 121ENM2215AB - 22mm×15mm 121ENM2815AB - 28x15mm 121ENM2822AB - 28x22mm 137ENM - Copper Press End Cap P: 137ENM12AB - 12mm 137ENM15AB - 15mm 137ENM18AB - 18mm 137ENM22AB - 22mm 137ENM28AB - 28mm 137ENM35AB - 35mm 137ENM42AB - 42mm 137ENM54AB - 54mm 137ENM67AB - 66.7mm 137ENM76AB - 76.1mm 137ENM89AB - 88.9mm 137ENM108AB - 108mm 138ENM - Copper Press Full crossover P x P: 138ENM15AB - 15mm 138ENM18AB - 18mm 138ENM22AB - 22mm 148ENM - Copper Press Partial crossover FTGxP: 148ENM12AB - 12mm 148ENM15AB - 15mm 148ENM18AB - 18mm 148ENM22AB - 22mm 149ENM - Copper Press Street crossover FTGxFTG: 149ENM15AB - 15mm 149ENM18AB - 18mm 149ENM22AB - 22mm 149ENM28AB - 28mm 301ENM - Copper Press Adapter - male thread P x R: 301ENM1210AB - 12mm×3/8” BSP 301ENM1213AB - 12mm×1/2” BSP 301ENM1510AB - 15mm×3/8” BSP 301ENM1513AB - 15mm×1/2” BSP 301ENM1519AB - 15mm×3/4” BSP 301ENM1813AB - 18mm×1/2” BSP 301ENM1819AB - 18mm×3/4” BSP 301ENM2213AB - 22mm×1/2” BSP 301ENM2219AB - 22mm×3/4” BSP 301ENM2225AB - 22mm×1” BSP 301ENM2819AB - 28mm×3/4” BSP 301ENM2825AB - 28mm×1” BSP 301ENM2832AB - 28mm×1-1/4” BSP 301ENM3525AB - 35mm×1” BSP 301ENM3532AB - 35mm×1-1/4” BSP 301ENM4232AB - 42mm×1-1/4” BSP 301ENM4238AB - 42mm×1-1/2” BSP 301ENM5451AB - 54mm×2” BSP 301ENM6764AB - 66.7mm×2-1/2” BSP 301ENM7664AB - 76.1mm×2-1/2” BSP 301ENM7676AB - 76.1mm×3” BSP 301ENM8976AB - 88.9mm×3” BSP 301ENM108102AB - 108mm×4” BSP 301ENM3538AB - 35mmx1-1/2" BSP 301ENM5438AB - 54mmx1-1/2" BSP 302ENM - Copper Press Adapter - Female thread P x Rp: 302ENM1210AB - 12mm×3/8” BSP 302ENM1213AB - 12mm×1/2” BSP 302ENM1510AB - 15mm×3/8” BSP 302ENM1513AB - 15mm×1/2” BSP 302ENM1519AB - 15mm×3/4” BSP 302ENM1819AB - 18mm×3/4” BSP 302ENM2213AB - 22mm×1/2” BSP 302ENM2219AB - 22mm×3/4” BSP 302ENM2225AB - 22mm×1” BSP 302ENM2819AB - 28mm×3/4” BSP 302ENM2825AB - 28mm×1” BSP 302ENM3532AB - 35mm×1-1/4” BSP 302ENM4238AB - 42mm×1-1/2” BSP 302ENM5451AB - 54mm×2” BSP 302ENM6764AB - 66.7mm×2-1/2” BSP 302ENM7664AB - 76.1mm×2-1/2” BSP 302ENM7676AB - 76.1mm×3” BSP 302ENM8976AB - 88.9mm×3” BSP 302ENM108102AB - 108mm×4” BSP 302ENM1813AB - 18mmx1/2" BSP 302ENM2832AB - 28mmx1-1/4" BSP 302ENM3525AB - 35mmx1" BSP 303ENM - Copper Press Adapter - male thread FTG x R: 303ENM1513AB - 15mm×1/2” BSP 303ENM2213AB - 22mm×1/2” BSP 303ENM2219AB - 22mm×3/4” BSP 303ENM1213AB - 12mmx1/2" BSP 303ENM1510AB - 15mmx3/8" BSP 303ENM2825AB - 28mmx1" BSP 303ENM3532AB - 35mmx1-1/4" BSP 304ENM - Copper Press Adapter - Female thread FTG x Rp: 304ENM1513AB - 15mm×1/2” BSP 304ENM2213AB - 22mm×1/2” BSP 304ENM2219AB - 22mm×3/4” BSP 304ENM3525AB - 35mm×1” BSP 304ENM5451AB - 54mm×2” BSP 304ENM1813AB -18mmx1/2" BSP 304ENM2825AB -28mmx1" BSP 305ENM - Copper Press Adapter Union P x P 305ENM1515AB - 15mm 305ENM2222AB - 22mm 305ENM2828AB - 28mm 305ENM3535AB - 35mm 305ENM4242AB - 42mm 305ENM5454AB - 54mm 306ENM - Copper Press Adapter Union - male thread P x R 306ENM1513AB - 15mmx1/2" 306ENM2219AB - 22mmx3/4" 306ENM2825AB - 28mmx1" 306ENM3532AB - 35mmx1-1/4" 306ENM4238AB - 42mmx1-1/2" 306ENM5451AB - 54mmx2" 307ENM - Copper Press Adapter Union - female thread P x Rp 307ENM1513AB - 15mmx1/2" 307ENM2219AB - 22mmx3/4" 307ENM2825AB - 28mmx1" 307ENM3532AB - 35mmx1-1/4" 307ENM4238AB - 42mmx1-1/2" 307ENM5451AB - 54mmx2" 313ENM - Copper Press Adapter Tee - female thread on branch P x P x Rp: 313ENM121213AB - 12mm×12mm×1/2” BSP 313ENM151513AB - 15mm×15mm×1/2” BSP 313ENM181813AB - 18mm×18mm×1/2” BSP 313ENM222213AB - 22mm×22mm×1/2” BSP 313ENM222219AB - 22mm×22mm×3/4” BSP 313ENM282813AB - 28mm×28mm×1/2” BSP 313ENM282819AB - 28mm×28mm×3/4” BSP 313ENM353513AB - 35mm×35mm×1/2” BSP 313ENM424213AB - 42mm×42mm×1/2” BSP 313ENM545413AB - 54mm×54mm×1/2” BSP 313ENM282825AB - 28mmx28mmx1" BSP 313ENM353519AB - 35mmx35mmx3/4" BSP 313ENM353525AB - 35mmx35mmx1" BSP 313ENM353532AB - 35mmx35mmx1-1/4" BSP 313ENM424219AB - 42mmx42mmx3/4" BSP 313ENM424238AB - 42mmx42mmx1-1/2" BSP 313ENM545425AB - 54mmx54mmx1" BSP 313ENM424225AB - 42mmx42mmx1" 313ENM545451AB - 54mmx54mmx2" 314ENM - Copper Press Adapter 90° Elbow - male thread P x R: 314ENM1513AB - 15mm×1/2” BSP 314ENM1813AB - 18mm×1/2” BSP 314ENM2219AB - 22mm×3/4” BSP 314ENM2825AB - 28mm×1” BSP 314ENM1210AB - 12mmx3/8" BSP 314ENM1510AB - 15mmx3/8" BSP 314ENM1819AB - 18mmx3/4" BSP 314ENM3532AB - 35mmx1-1/4" BSP 315ENM - Copper Press Adapter 90° Elbow - female thread P x Rp: 315ENM1513AB - 15mm×1/2” BSP 315ENM1813AB - 18mm×1/2” BSP 315ENM2219AB - 22mm×3/4” BSP 315ENM2825AB - 28mm×1” BSP 315ENM1210AB - 12mmx3/8" BSP 315ENM1213AB - 12mmx1/2" BSP 315ENM1510AB - 15mmx3/8" BSP 315ENM2213AB - 22mmx1/2" BSP 326ENM - Copper Press Female Backplate Elbow P x Rp 326ENM1513AB - 15mmx1/2" 326ENM2219AB - 22mmx3/4" Copper Press UnequalTee PxFTGxP: 142ENM545422AB - 54x54x22mm 142ENM545428AB - 54x54x28mm Copper Press Slip Coupling PxP: 111ENM15AB - 15mm 111ENM18AB - 18mm 111ENM22AB - 22mm 111ENM28AB - 28mm 111ENM35AB - 35mm 111ENM42AB - 42mm 111ENM54AB - 54mm

Approval Holder:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Range of copper or stainless-steel brazed heat exchangers available with various number of plates as listed below. Maximum working pressure 25.0 Bar (copper brazed models). Maximum working pressure 10.0 Bar (stainless steel brazed models). Maximum operating temperature 100.0°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

4G3/4 models = ¾” BSP, 4AYB models = 8mm porthole (XB05H-1-xx-2STS_10/10_S1_4AYB Only) or 15mm porthole for all other models, 4clip models = 15mm ID clip connection.

Marking:

DANFOSS logo, model code, date of manufacture (YYYY/WW), PN and other technical data laser engraved into the body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

XB05M-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2CU_25/25_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4AYB, XB05X-1-xx-2CU_25/25_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-xx-2STS_10/10_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-20-2CU_25/25_S1_4Clip, XB05X-1-20-2STS_10/10_S1_4Clip, XB05H-1-xx-2CU_25/25_S1_4Clip, XB05H-1-xx-2STS_10/10_S1_4Clip. XB05 - frame size (XB05 = 312 mm x 76 mm) M, X, H - heatplate corrugation (different dimple design) - 1 - one pass heat exchanger (all XB05 range is one pass) “xx” = number of plates from 8 to 70. HP material = always 2; meaning material of heatplate which is always 1.4404. Brazing material = Stainless steel brazed = StS, Copper brazed = Cu. Pressure = approved pressure for primary and secondary channels (for XB05 is 25 bar when copper brazed and 10 bar when stainless steel brazed visible from application list in 202_f2). Connection configuration = position of connections (on XB05 only S1 applies). Connection type = G3/4 threaded ¾ connections AYB -no connections. Clip - tailormade solder and / or clip connections; usually tailormade for specific customer.

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperatures Sizes DN15-25 models: 50°C, sizes DN32-40 models: 85°C.

Section:

1505 Water Meters

Size:

See model.

Marking:

GAER and product info on dial. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

GMS DN15 GAER: ¾” BSP (M), GMS DN20 GAER: 1” BSP (M), GMS DN25 GAER: 1¼” BSP (M). GMS DN32 GAER: 1½” BSP (M), GMS DN40 GAER: 2” BSP (M).

Approval Holder:

Hidroglobal Tecnologia del Agua S.A.

Company Name

Hidroglobal Tecnologia del Agua S.A.

Address

C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS

Postcode

08150

Country

Spain

Phone

+34 93 573 74 00

General Email

calidad@hidroglobal.com

View All Listings by this Company

Range of in-line water meters with either a brass or plastic composite body. The product incorporates a plastic strainer on the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

DIEHL metering, model code and product information on dial face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Aries 15/110 Composite Body ¾” BSP (M) Aries 15/110 Brass Body ¾” BSP (M) Aries 20/130 Brass Body 1” BSP (M)

Approval Holder:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Manufacturer:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Range of in-line water meters with brass bodies. The inlets incorporate a plastic filter. The outlets incorporate a non-return valve (not intended for or suitable for backflow protection). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M), 1” BSP (M) & 1¼” BSP (M) Sizes Added December 2025: 1.1/2” BSP (M) & 2” BSP (M)

Marking:

Shenzhen Kaifa logo, date of manufacture (YYYY), model & technical info on meter face.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

MA408K

Approval Holder:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company

Manufacturer:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company

Range of in-line water meters with plastic bodies. The inlet incorporates a plastic filter. Maximum working pressure; 16 Bar Maximum operating temperature 50°C

Section:

1505 Water Meters

WRAS Approval Number:

240902069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

All models available in body lengths of 165, 170 and 190mm

Size:

1" BSP (M)

Marking:

Arad logo, Model and technical information on faceplate. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

PD GLADIATOR Q3=4 1124XXXX With 3P register 1132XXXX- With 3G register

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

CIM & Made in Italy on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

CIM 1450 – Water Hammer shock absorber

Approval Holder:

Cimberio S.p.A

Company Name

Cimberio S.p.A

Address

Via Torchio, 57 San Maurizio d’Opaglio

Postcode

28017

Country

Italy

Phone

+39.0322.923001

General Email

tguidetti@cimberio.it

View All Listings by this Company

Range of VEGAPULS radar sensors for level measurement with plastic bodies. Cold water use only. Open outlet use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model key

Marking:

VEGA logo date of manufacturer (YYYY), serial number and other technical data on body

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

PSC21.ab-c-d-N-f-g-h-I VEGAPULS C 21 PSC22.ab-c-d- N -f-g-h-I VEGAPULS C 22 PSC23.ab-c-d- N -f-g-h-I VEGAPULS C 23 PS21.ab-c-d- N -f-g-h-I VEGAPULS 21 PS31.ab-c-d- N -f-g-h-I VEGAPULS 31 KEY FOR VEGAPULS C 21 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; G Thread G1½ / G1 N Thread 1½NPT / 1NPT R Thread R1½ / R1 g = Cable material / Length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 22 ab = Explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignition proof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as: X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 23 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; F Thread G1 M Thread 1NPT Q Thread R1 g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS 21 / 31 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) AX without, for Ex-free area (CE, UKCA, RCM) VC ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) SC EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 TC CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 WC INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 c = Approved as overfill protection, which can be displayed as; X Without W With (WHG, VLAREM) d = Ship approval, which can be displayed as; X Without S With (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff/Pharmaceutical certificate, which can be displayed as X Without N With (NSF/ANSI/CAN 61) P With (NIH) F With (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable entry / connection, which can be displayed as; M M20x1.5 / Cable gland PA black (ø5-9mm), standard h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART i = Sensor setting via smartphone and VEGA Tools app X Without B With

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

Manufacturer:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

Range of ‘Thermowatt’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

Thermowatt logo, Model, Voltage, Size and other information on cap.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company

Range of positive displacement diaphragm pumps with plastic bodies, EPDM ‘O’-rings and TPE diaphragm. The product incorporates an integral bypass relief valve. For use with John Guest LLDPE Pipe. Maximum working pressure 12.0 Bar. Maximum operating temperature 40.0°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240702045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

5/16" Push fit, 3/8" Push fit.

Marking:

Aquatec name and logo, model number, serial number and date of manufacture (DD/MM/YY) on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

535X-2XXW-XXXX, 537X-2XXW-XXXX. Model Code Denotes: 1st & 2nd designators = 53 - Series Demand Delivery Pumps. 3rd designator is port size for pumphead housing, where ‘5’ = 3/8” or ‘7’ = 5/16” . 4th designator is cam angle for flow performance variation only. X can be 0 to 9. 5th designator ‘2’ indicates that pump has bypass relief control. 6th designator is for pressure setting of relief valve. X can be A to Z depending on pressure setting. 7th designator ‘X’ is a code for the specific materials in this model, e.g. Nylon pumphead housing. 8th designator ‘W’ = WRAS Compliant 9th - 12th designators XXXX can be any alphanumeric characters to denote electrical motor and motor mounting base plate combination.

Approval Holder:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Manufacturer:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Range of shower handsets with plastic bodies in various finishes (see models).

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301102

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Bristan on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

HS1002

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower outlets with matte black finishes, consisting of a shower hose, handset, riser rail and a brass wall mounted inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205915

Note:

Open outlet use only.

Size:

1/2" BSP (M)

Marking:

Bristan on shower handset.

Installation Requirements:

R040

Expiry date:

31/05/2027

Model:

RP3 SQR KIT01 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of overhead shower outlets, (chrome plated) ABS material incorporating a swivel connection, incorporates a stainless-steel strainer with an EPDM gasket. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207916

Size:

½” (F)

Marking:

Bristan on rosette

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

RP3 FHC ABRD01 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company