Directory Search Results

Print List

#250801701

Range of urinal autosyphons with plastic body and supplied with plastic backnuts.

Section:
1307 Flushing Mechanisms
Section Subtitle:
Urinals.
WRAS Approval Number:
250801701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
B.B.S Auto Syphon, BS 1876 tested & Masefield Beta Ltd. on outer body
Installation Requirements:
R001
Expiry date:
31/08/2030
Model:
BBS Auto Syphon range consisting of; Size 1 - 4.5 litre (1 Gallon): 5½’’ X 1” BSP outlet. 5½’’ X 1¼” BSP outlet. Size 2 - 9 litre (2 Gallon): 6¼’’ X 1” BSP outlet. 6¼’’ X 1¼” BSP outlet. Size 3 - 13.5 litre (3 Gallon): 7½’’ X 1” BSP outlet. 7½’’ X 1¼” BSP outlet. Size 4 - 18 litre (4 Gallon): 8¼’’ X 1” BSP outlet. 8¼’’ X 1¼” BSP outlet. Size 5 - 22.5 litre (5 gallon): 9¼’’ X 1” BSP outlet. 9¼’’ X 1¼” BSP outlet.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250604712

Range of under counter electric instantaneous water heaters with stainless steel tank and heating element. Open outlet use only. Maximum operating temperature 98°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
250604712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
DAOMENG logo printed on front panel. DAOMENG logo; Pressure, Capacity, Model No and product info on data label.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
DM001, 241450, S2, S5.

Approval Holder:
GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD
Company Name
GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD
Address
17, B Building He Sui Industrial Avenue Dongheping Village Dongfeng Town Zhongshan City. Guangdong Province.
Country
China
Phone
18676009191
General Email
18666151668@163.com

View All Listings by this Company

Print This Approval


#250602716

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. Some models, please refer to model below, incorporate only a primary circuit. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 60°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
250602716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
Warmhaus on front panel. Warmhaus, product name and operating info on label on side panel
Installation Requirements:
R001 R140 R360
Expiry date:
30/06/2030
Model:
Following models are ¾” BSP M inlet/outlet primary circuit, ½” BSP M inlet/outlet secondary circuit. KM0725250101005901 EWA 2525C 25KW KM0725300101005901 EWA 2530 C 30 KW KM0725310303008701 MINERWA 25/31 COMBI BOILER IE (BLACK) KM0725300201008901 ENERWA PLUS 2530 C - UK KM0325300201001301 ENERWA PLUS 2530 C - UK + FLUE KIT KM0730350201008901 ENERWA PLUS 3035 C - UK KM0330350201001301 ENERWA PLUS 3035 C + F.KIT - DHW 35 - UK KM0735400201008901 ENERWA PLUS 3540 C - UK KM0335400201001301 ENERWA PLUS 3540 C - UK KOMBI KM0742400201001301 ENERWA PLUS 4240 C 40 KW - UK KM0745430201001301 ENERWA PLUS 4543 C 43 KW - UK KM0725310303009801 EXP.MINERWA 25 SYSTEM BOLER (BLACK) KM1220240101012201 GLOWA 2024 KM1224260101012201 GLOWA 2426 KM1228300101012201 GLOWA 2830 KM1233350101012201 GLOWA 3335 KM1220240101012401 GLOWA SMART 20/24 20KW KM1224260101012401 GLOWA SMART 24/26 24KW KM1228300101012401 GLOWA SMART 28/30 28KW KM1233350101012401 GLOWA SMART 33/35 33KW Following models are ¾” BSP M inlet/outlet and are primary circuit only KM1024000201005501 EXP.ENERWA PLUS H.O 2500H KM1024000201010201 EXP. WARMHAUS ENERWA PLUS H.O 2500H - UK KM1028000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3000H KM1028000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3000H - UK KM1033000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H KM1033000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3500H - UK KM1133000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H+F.KIT KM1133000201006201 EXP.WARMHAUS ENERWAPLUS HO 3500H-D+F.KIT KM1142000201005501 ENERWA PLUS H.O 4200H KM1145000201005501 ENERWA PLUS H.O 4500H KM1220000101012301 GLOWA 20 H.O. KM1224000101012301 GLOWA 24 H.O. KM1228000101012301 GLOWA 28 H.O. KM1233000101012301 GLOWA 33 H.O.

Manufacturer:
Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.
Company Name
Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.
Address
Nilufer Organise Sanayi Bolgesi Selvi Cad No:3 Nilufer Bursa Turkey
Phone
+90-224-2959400

View All Listings by this Company

Print This Approval


#250702008

Range of water meters with black nylon bodies. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Water meter inlet is classed as 1 1/2" BSP M but product is supplied with a raiser that has 1 1/2" BSP M outlets and 1 1/2" BSP F inlets.
Marking:
Contazara & model on housing and product info on meter face.
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
CZ4000 ½’’ CONCENTRIC PLASTIC WITH RAISER CZ4000 ¾’’ CONCENTRIC PLASTIC WITH RAISER

Approval Holder:
Contazara SA
Company Name
Contazara SA
Address
Ctra Castellon Km 5,5. 50720 Zargosa
Country
Spain

View All Listings by this Company

Print This Approval


#250602045

Range of water meters with brass and plastic bodies and plastic turbines. The inlet incorporates a plastic filter Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” to 2 ½” BSP M (G models) DN 50 flanged (FL Models)
Marking:
Zenner logo, Model, ZR, CE, date of manufacture (YYYY) and other information on faceplate. Flow arrow and date of manufacture (YYYY) on body.
Installation Requirements:
R001 R008
Expiry date:
30/06/2030
Model:
MTKD 2,5-165-G ¾ B (½) MTKD 4-190-G 1 B (¾) MTKD 6,3-260-G 1 ¼ B (1) MTKD 10-260-G 1 ¼ B (1) MTKD 10-260-G 1 ½ B (5/4) MTKD 16-300-G 2 B (6/4) MTKD 25-270-G 2 ½ B (2) MTKD 25-300- G 2 ½ B (2) MTKD 25-270-FL MTKD 25-300-FL MTKD-L 2,5-165-G ¾ B (½) MTKD-L 4-190-G 1 B (¾)

Manufacturer:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company

Print This Approval


#250604027

Range of SSM-AQUO ultrasonic water meters with brass bodies, the inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4” BSP (M) 7/8” BSP (M) 1” BSP (M) 1-1/4” BSP (M) 1-1/2” BSP (M) 2” BSP (M)
Marking:
Pietro Fiorentini logo moulded on cap. Pietro Fiorentini logo, pressure, flow, year of manufacture (YYYY) and other technical information printed on meter face. Flow arrow and DN moulded on body.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
SSM-AQUO DN15 - DN40

Approval Holder:
Pietro Fiorentini S.p.A.
Company Name
Pietro Fiorentini S.p.A.
Address
Via E. Fermi, n. 8/10-36057 Arcugnano (VI).
Country
Italy
General Email
mario.petti@fiorentini.com

View All Listings by this Company

Print This Approval


#250602705

Range of flow meters with plastic bodies. Maximum working pressure 8.0 bar Maximum operating temperature 40°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP (F) x 3/8” BSP (M)
Marking:
BWT Logo on LCD display. Digmesa and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
812486 (930-0074) Aquameter 3/8” with Relais. 812185 (938-A930/LE5117) Aquameter 3/8” with LCD Display. 812495 (938-A70/LE5113) Aquameter HF 3/8” with LCD Display.

Approval Holder:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company

Print This Approval


#250615002

Range of angled valves with chromium plated brass bodies, incorporating a non-rising spindle headwork or a quarter turn ceramic disc headwork with either triangle, cubic, single lever or dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Valtech on body.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
Non-rising spindle head with dome type operating members: AGV0112: ½” BSP (M) x ½” BSP (M), AGV0138: ½” BSP (M) x ⅜” BSP (M), AGV01A12: ½” BSP (M) x ½” BSP (M), AGV01A38: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with dome type operating member: AGV4612: ½” BSP (F) x ½” BSP (M). ¼ turn ceramic disc headwork with single lever operating member: AGV2312: ½” BSP (M) x ½” BSP (M), AGV2312B: ½” BSP (M) x ½” BSP (M), AGV2338: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with cubic operating member: AGV4812: ½” BSP (M) x ½” BSP (M), AGV4838: ½” BSP (M) x ⅜” BSP (M), AGV2512: ½” BSP (M) x ½” BSP (M), AGV2538: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with triangle operating member: AGV05Q38: ½” BSP (M) x ⅜” BSP (M).
Product Images

Approval Holder:
Ningbo Valtech Flow Control Co., Ltd
Company Name
Ningbo Valtech Flow Control Co., Ltd
Address
1130 Baizhang Road Ningbo Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Ningbo Valtech Flow Control Co., Ltd
Company Name
Ningbo Valtech Flow Control Co., Ltd
Address
Export Processing Zone, Beilun Bonded South Zone, Ningbo City, Zhejiang Province (No. 6 Zhufeng Road)

View All Listings by this Company

Print This Approval


#250607701

’TP Series 300’ and ‘TPE Series 300’ ranges of single stage in-line pumps with black coloured cataphoretic electro deposition coated cast iron or ductile iron bodies and bronze, stainless-steel or black coloured cataphoretic electro deposition coated cast iron impellers. Pumps are available with BQQE or BBQE shaft seals. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250607701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN32 - DN350 Flanged connections.
Marking:
Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, PN-SN no., technical info and manufacturing country on data plate on motor stool.
Installation Requirements:
R001 R415
Expiry date:
30/06/2030
Model:
TP series 300: TP(E) XX-XXX/X [Blank] or S or NC - X or BX - F - A or B or S or O or Y or Q - XXXX * Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal diameter of inlet and outlet ports, DN (32-350). XXX = maximum head [dm] (60-1050). /X = pole number (2, 4, 6). [Blank] or S or NC = Sensor options: [Blank] = without sensor, S = TPE with factory-fitted differential-pressure sensor, NC = TPE with Siemens/Nidec motor with integrated CUE (Grundfos brand of VSD). X or BX = B: Oversize motor, X: Special version. F = DIN flange. A or B or S or O or Y or Q = A: Basic version - Cast iron pump housing and impeller, B: Cast iron pump housing with bronze impeller, S: Cast iron pump housing with stainless steel impeller, O: Ductile cast iron pump housing with cast iron impeller, Y: Ductile cast iron pump housing with bronze impeller, Q = Ductile cast iron pump housing with stainless steel impeller. XXXX = shaft seal: BQQE or BBQE. * = Motor information, does not have any bearing on water contact parts.
Product Images

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#250312003

Range of shower handsets and overhead showers with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250312003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet only
Marking:
Jelong, WRAS on handset body or connection.
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Proviso:
Open outlet only
Model:
A12231* 3F hand shower A12232* 3F hand shower A12131* 3F hand shower A18311* 1F hand shower A12011* 1F hand shower A14431* 3F hand shower A14441* 4F hand shower A15241* 4F hand shower A15331* 3F hand shower B27811* 1F shower head B27012* 1F shower head B26111* 1F shower head B23111* 1F shower head B23011* 1F shower head B23251* 5F shower head For Hand shower * denotes: CH=CHROME PLATED BN=BRUSH NICKEL, GM=GUN METAL, G=GOLD, RG=ROSE GOLD For Shower head * denotes: CH=CHROME PLATED MB=MATT BLACK, W= WHITE, BN=BRUSH NICKEL, ORB=OIL RUBBED BRONZE, GM=GUN METAL, G=GOLD, RG=ROSE GOLD

Approval Holder:
Xiamen Jelong Plumbing Co.,Ltd
Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company
Manufacturer:
Xiamen Jelong Plumbing Co.,Ltd
Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company

Print This Approval


#250602028

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250602028
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Any flow rates claimed by the manufacturer have not been verified
Size:
½” BSP (F).
Marking:
Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#250612005

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250612005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Keekoe on body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
H01011, H01023, H02013, H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Approval Holder:
Xiamen Keekoe Sanitary Ware Co. Ltd.
Company Name
Xiamen Keekoe Sanitary Ware Co. Ltd.
Address
No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen
Country
China

View All Listings by this Company

Print This Approval


#250608015

Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless-steel filter and a plastic flow regulator. Maximum working temperature 45°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250608015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Dolphin Solutions Ltd logo on the body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
DB3001.a.bbb Dolphin blue round shower head DB3002.a.bbb Dolphin blue square shower head Where: The suffix .a in the above codes will be a number 1 - 9 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - 9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVD or powder coat. It can be either two or three digits from 01-999.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom
General Email
Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Print This Approval


#250602009

Range of in-line bronze bodied ‘Y’-pattern strainers with stainless steel mesh. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
17.06181.G15.CP5R-2030: ½” BSP (F)x(F) (DN15), 17.06181.G20.CP5R-2030: ¾” BSP (F)x(F) (DN20), 17.06181.G25.CP5R-2030: 1” BSP (F)x(F) (DN25), 17.06181.G32.CP5R-2030: 1¼” BSP (F)x(F) (DN32), 17.06181.G40.CP5R-2030: 1½” BSP (F)x(F) (DN40), 17.06181.G50.CP5R-2030: 2” BSP (F)x(F) (DN50).
Marking:
Zhejiang Valogin Technology Co., Ltd. trademark logo (‘V&G’), flow arrow, size and pressure on body.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
17.06181.G15.CP5R-2030, 17.06181.G20.CP5R-2030, 17.06181.G25.CP5R-2030, 17.06181.G32.CP5R-2030, 17.06181.G40.CP5R-2030, 17.06181.G50.CP5R-2030.

Approval Holder:
Zhejiang Valogin Technology Co Ltd
Company Name
Zhejiang Valogin Technology Co Ltd
Address
Qinggang Technological Ind. Zone, Yuhuan, Taizhou Zhejiang
Country
China
Phone
+86 (0)574 8907 1560

View All Listings by this Company

Print This Approval


#250615001

Range of Y-patterned strainers with brass bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” - 4” BSP (F)x(F).
Marking:
ZHEJIANG STANDARD VALVE CO., LTD logo (‘STA’) on filter cap. PN, DN, flow arrow and size on body.
Installation Requirements:
R001 R120
Expiry date:
30/06/2030
Model:
4112.
Product Images

Approval Holder:
ZHEJIANG STANDARD VALVE CO., LTD
Company Name
ZHEJIANG STANDARD VALVE CO., LTD
Address
Valve Industrial Area Yuhuan County (Longxi Town) Zhejiang
Country
China
General Email
stahs@sidante.com

View All Listings by this Company
Manufacturer:
ZHEJIANG STANDARD VALVE CO., LTD
Company Name
ZHEJIANG STANDARD VALVE CO., LTD
Address
Valve Industrial Area Yuhuan County (Longxi Town) Zhejiang
Country
China
General Email
stahs@sidante.com

View All Listings by this Company

Print This Approval


#240288021

410714 Modena & 161633 Kubic ranges of pillar taps (brass bodies – Chrome finish) incorporating a quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar, Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
240288021
Size:
½ “BSP (M).
Marking:
WIX on body.
Installation Requirements:
R001 R006
Expiry date:
28/02/2029
Model:
410714 Modena Pillar Tap - Chrome. 161633 Kubic Basin Taps - Chrome.

Approval Holder:
Wickes PLC
Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company

Print This Approval


#250288004

Range of pillar taps, incorporating a non-rising spindle headwork with dome type operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with metal back nuts. All taps are supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
250288004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
WIX on body
Installation Requirements:
R001 R006
Expiry date:
28/02/2030
Model:
410150 - Chrome All taps will be supplied with an optional Flow Regulator.

Approval Holder:
Wickes PLC
Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company

Print This Approval


#250604029

Range of wall mounted self-closing taps (chromium plated brass) with a dome type operating member. The SCHELL PETIT SC - 02 147 06 99 model incorporates a screwdriver operated servicing valve on the inlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
250604029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Schell on operating member
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
02 136 06 99 - SCHELL PETIT SC 02 147 06 99 - SCHELL PETIT SC

Approval Holder:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

Print This Approval


#250602048

Range of stainless steel braided EPDM lined flexible hose assemblies with EPDM seals & EPDM washers, available with a variety of end connections. For use with copper pipe manufactured to EN1057 & HEP20 PB pipe. Maximum working pressure; 6 Bar Maximum operating temperature; 65°c

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250602048
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models below. PF = Pushfit
Marking:
On cap: Wavin, Hep20. Collor: BS7291, Size, and KEYLESS. On ferule: DOM (YYYY) GCE and WRAS
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
3093476 KL425A-15 15mm PF X ½ BSP (F) 3093488 KL125A-15 15mm PF X ½ BSP (F) 3093567 KL125B-15 15mm PF X 3/4 BSP (F) 3093484 KL125C-22 22mm PF X ¾ BSP (F) 3093477 KL125B-22 22mm PF X ¾ BSP (F) 3093487 KL225A-15 15mm PF X ½ BSP (F) 3093478 KL225B-15 15mm PF X 3/4 BSP (F) 3093515 KL225C-22 22mm PF X ¾ BSP (F) 3093512 KL225B-22 22mm PF X ¾ BSP (F) 3093493 KL325A-15 15mm PF X ½ BSP (F) 3093583 KL325B-22 22mm PF X ¾ BSP (F) 3093586 KL125H-15 15mm PF 3093579 KL125H-22 22mm PF 3093601 KL225H-15 15mm PF 3093518 KL225H-22 22mm PF 3093593 KL125D-15 15mm PF X ½ BSP (F) 3093501 KL125F-15 15mm PF M10 threaded 3093496 KL125G-15 15mm PF M12 threaded

Manufacturer:
Wavin Ltd.
Company Name
Wavin Ltd.
Address
Edlington Lane, Edlington Doncaster
Postcode
DN12 1BY
Country
United Kingdom
Phone
01709 856300

View All Listings by this Company

Print This Approval


#250602015

Range of wall mounted self-closing thermostatic shower valves with brass bodies, with a chrome plated dome type operating member. Models are also supplied with a chrome plated shower head with a plastic aerator. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250602015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models:
Marking:
790BOX - Delabie on case cover 790218 – Delabie on button and shower head 790219 – Delabie on button and shower head
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
790BOX – ½” BSP (M) X 3/4" BSP (F) 790218 – ¾” BSP (M) 790219 – ¾” BSP (M)

Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
1-3 Henderson house Hithercroft Road Wallingford Oxfordshire
Postcode
OX10 9DG
Country
United Kingdom

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 288 of 310

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.