Directory Search Results

Print List

#240404065

TP range of capillary solder ring copper fittings for use with copper tube EN1057, for above ground use only. Maximum working pressure: 25.0 bar. Maximum operating temperature: 85°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240404065
Size:
see models
Marking:
TPX & size etched on body
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
STRAIGHT COUPLER TP0108 8mm, TP0110 10mm, TP0112 12mm, TP0115 15mm, TP0122 22mm, TP0128 28mm, TP0135 35mm, TP0142 42mm, TP0154 54mm. SLIP COUPLER TP01S15 15mm, TP01S22 22mm, TP01S28 28mm, REDCUED COUPLER TP01R1008 10mm x 8mm, TP01R1508 15mm x 8mm, TP01R1510 15mm x 10mm, TP01R1512 15mm x 12mm, TP01R2210 2mm x 10mm, TP01R2215 22mm x 15mm, TP01R2815 28mm x 15mm, TP01R2822 28mm x 22mm, TP01R3522 35mm x 22mm, TP01R3528 35mm x 28mm, TP01R4235 42mm x 35mm, TP01R5442 54mm x 42mm. 90° Elbow TP1208 8mm, TP1210 10mm, TP1212 12mm, TP1215 15mm, TP1222 22mm, TP1228 28mm, TP1235 35mm, TP1242 42mm, TP1254 54mm. STREET ELBOW TP12S15 15mm, TP12S22 22mm, TP12S28 28mm, 45° ELBOW TP2115 15mm, TP2122 22mm, TP2128 28mm, TP2135 35mm, TP2142 42mm, TP2154 54mm. FITTING REDUCER TP061008 10mm x 8mm, TP061508 15mm x 8mm, TP061510 15mm x 10mm, TP061512 15mm x 12mm, TP062212 22mm x 12mm, TP062215 22mm x 15mm, TP062815 28mm x 15mm, TP062822 28mm x 22mm, TP063515 35mm x 15mm, TP063522 35mm x 22mm, TP063528 35mm x 28mm, TP064215 42mm x 15mm, TP064222 42mm x 22mm, TP064228 42mm x 28mm, TP064235 42mm x 35mm, TP065415 54mm x 15mm, TP065422 54mm x 22mm, TP065428 54mm x 28mm, TP065435 54mm x 35mm, TP065442 54mm x 42mm STOP END 10mm, TP6110 12mm, TP6112 15mm, TP6115 22mm, TP6122 28mm, TP6128 35mm, TP6135 42mm, TP6142 54mm. TP6154 EQUAL TEE TP2408 8mm, TP2410 10mm, TP2412 12mm, TP2415 15mm, TP2422 22mm, TP2428 28mm, TP2435 35mm, TP2442 42mm, TP2454 54mm TEE - REDUCED BOTH ENDS TP25222215 22mm x 22mm x 15mm, TP25282815 28mm x 28mm x 15mm, TP25282822 28mm x 28mm x 22mm, TP25353515 35mm x 35mm x 15mm, TP25353522 35mm x 35mm x 22mm, TP25353528 35mm x 35mm x 28mm, TP25424215 42mm x 42mm x 15mm, TP25424222 42mm x 42mm x 22mm, TP25424228 42mm x 42mm x 28mm, TP25424235 42mm x 42mm x 35mm, TP25545415 54mm x 54mm x 15mm, TP25545422 54mm x 54mm x 22mm, TP25545428 54mm x 54mm x 28mm, TP25545435 54mm x 54mm x 35mm, TP25545442 54mm x 54mm x 42mm,

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

Print This Approval


#240902045

Range of plastic compression fittings incorporating polypropylene bodies& plastic pipe liners.. For use with both PE80 & PE100 pipe manufactured to BS EN 12201. Maximum working pressure 16 Bar Maximum operating temperature 23°C

Section:
1160 Fittings for use with Tube and Pipe
Section Subtitle:
Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240902045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For connection sizes (XX) see models. For connection types, see below: IQ401 – XXmm Comp x XX BSP (F) IQ410 – XXmm Comp x XXmm Compression IQ411 – XXmm Comp x XX BSP (M) IQ412 – XXmm Comp x XXmm Compression IQ413 – XXmm Comp x XXmm Compression IQ414 – XXmm Comp x XXmm Compression x XXmm Compression IQ415 – XXmm Comp x XXmm Compression x XX BSP (M) IQ416 – XXmm Comp x XXmm Compression x XX BSP (F) IQ418 – XXmm Comp x XX BSP (F) IQ419 – XXmm Comp x XX BSP (M) IQ421 – XXmm Comp x Outlet IQ423 – XXmm Comp x XX BSP (F) IQ424 – XXmm Comp x XXmm Compression x XXmm Compression IQ440 – XXmm Comp x XXmm Compression
Marking:
Irritec, size & PN on nut. Date of manufacture (MM/YY) & Size on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
IQ40120F0U20B – 20x1/2'' IQ40120F0U20BXBU - 20x1/2'' IQ40120F0U20C - 20x3/4'' IQ40120F0U20CXBU - 20x3/4'' IQ40120F0U25B - 25x1/2'' IQ40120F0U25BXBU - 25x1/2'' IQ40120F0U25C - 25x3/4'' IQ40120F0U25CXBU - 25x3/4'' IQ40120F0U25D - 25x1'' IQ40120F0U25DXBU - 25x1'' IQ40120F0U32B - 32x1/2'' IQ40120F0U32C - 32x3/4'' IQ40120F0U32CXBU - 32x3/4'' IQ40120F0U32D - 32x1'' IQ40120F0U32DXBU - 32x1'' IQ40120F0U32E - 32x1''1/4 IQ40120F0U32EXBU - 32x1''1/4 IQ40120F0U40D - 40x1'' IQ40120F0U40DXBU - 40x1'' IQ40120F0U40E - 40x1''1/4 IQ40120F0U40EXBU - 40x1''1/4 IQ40120F0U40F - 40x1''1/2 IQ40120F0U40FXBU - 40x1''1/2 IQ40120F0U50E - 50x1''1/4 IQ40120F0U50EXBU - 50x1''1/4 IQ40120F0U50F - 50x1''1/2 IQ40120F0U50FXBU - 50x1''1/2 IQ40120F0U50G - 50x2'' IQ40120F0U50GXBU - 50x2'' IQ40120F0U63E - 63x1''1/4 IQ40120F0U63EXBU - 63x1''1/4 IQ40120F0U63F - 63x1''1/2 IQ40120F0U63FXBU - 63x1''1/2 IQ40120F0U63G - 63x2'' IQ40120F0U63GXBU - 63x2'' IQ4102000U200 - 20 IQ4102000U200XBU - 20 IQ4102000U250 - 25 IQ4102000U250XBU - 25 IQ4102000U320 - 32 IQ4102000U320XBU - 32 IQ4102000U400 - 40 IQ4102000U400XBU - 40 IQ4102000U500 - 50 IQ4102000U500XBU - 50 IQ4102000U630 - 63 IQ4102000U630XBU - 63 IQ41120M0U20B - 20x1/2'' IQ41120M0U20BXBU - 20x1/2'' IQ41120M0U20C - 20x3/4'' IQ41120M0U20CXBU - 20x3/4'' IQ41120M0U25B - 25x1/2'' IQ41120M0U25BXBU - 25x1/2'' IQ41120M0U25C - 25x3/4'' IQ41120M0U25CXBU - 25x3/4'' IQ41120M0U25D - 25x1'' IQ41120M0U25DXBU - 25x1'' IQ41120M0U32C - 32x3/4'' IQ41120M0U32CXBU - 32x3/4'' IQ41120M0U32D - 32x1'' IQ41120M0U32DXBU - 32x1'' IQ41120M0U32E - 32x1''1/4 IQ41120M0U32EXBU - 32x1''1/4 IQ41120M0U40D - 40x1'' IQ41120M0U40DXBU - 40x1'' IQ41120M0U40E - 40x1''1/4 IQ41120M0U40EXBU - 40x1''1/4 IQ41120M0U40F - 40x1''1/2 IQ41120M0U40FXBU - 40x1''1/2 IQ41120M0U50E - 50x1''1/4 IQ41120M0U50EXBU - 50x1''1/4 IQ41120M0U50F - 50x1''1/2 IQ41120M0U50FXBU - 50x1''1/2 IQ41120M0U50G - 50x2'' IQ41120M0U50GXBU - 50x2'' IQ41120M0U63F - 63x1''1/2 IQ41120M0U63FXBU - 63x1''1/2 IQ41120M0U63G - 63x2'' IQ41120M0U63GXBU - 63x2'' IQ4122000U20A - 20x16 IQ4122000U25B - 25x20 IQ4122000U25BXBU - 25x20 IQ4122000U32C - 32x25 IQ4122000U32CXBU - 32x25 IQ4122000U40C - 40x25 IQ4122000U40CXBU - 40x25 IQ4122000U40D - 40x32 IQ4122000U40DXBU - 40x32 IQ4122000U50C - 50x25 IQ4122000U50CXBU - 50x25 IQ4122000U50D - 50x32 IQ4122000U50DXBU - 50x32 IQ4122000U50E - 50x40 IQ4122000U50EXBU - 50x40 IQ4122000U63E - 63x40 IQ4122000U63EXBU - 63x40 IQ4122000U63F - 63x50 IQ4122000U63FXBU - 63x50 IQ4132000U200 - 20 IQ4132000U200XBU - 20 IQ4132000U250 - 25 IQ4132000U250XBU - 25 IQ4132000U320 - 32 IQ4132000U320XBU - 32 IQ4132000U400 - 40 IQ4132000U400XBU - 40 IQ4132000U500 - 50 IQ4132000U500XBU - 50 IQ4132000U630 - 63 IQ4132000U630XBU - 63 IQ4142000U200 - 20 IQ4142000U200XBU - 20 IQ4142000U250 - 25 IQ4142000U250XBU - 25 IQ4142000U320 - 32 IQ4142000U320XBU - 32 IQ4142000U400 - 40 IQ4142000U400XBU - 40 IQ4142000U500 - 50 IQ4142000U500XBU - 50 IQ4142000U630 - 63 IQ4142000U630XBU - 63 IQ41520F0U20B - 20x1/2'' IQ41520F0U20BXBU - 20x1/2'' IQ41520F0U20C - 20x3/4'' IQ41520F0U20CXBU - 20x3/4'' IQ41520F0U25B - 25x1/2'' IQ41520F0U25BXBU - 25x1/2'' IQ41520F0U25C - 25x3/4'' IQ41520F0U25CXBU - 25x3/4'' IQ41520F0U25D - 25x1'' IQ41520F0U25DXBU - 25x1'' IQ41520F0U32B - 32x1/2'' IQ41520F0U32BXBU - 32x1/2'' IQ41520F0U32C - 32x3/4'' IQ41520F0U32CXBU - 32x3/4'' IQ41520F0U32D - 32x1'' IQ41520F0U32DXBU - 32x1'' IQ41520F0U40D - 40x1'' IQ41520F0U40DXBU - 40x1'' IQ41520F0U40E - 40x1''1/4 IQ41520F0U40EXBU - 40x1''1/4 IQ41520F0U40F - 40x1''1/2 IQ41520F0U50E - 50x1''1/4 IQ41520F0U50EXBU - 50x1''1/4 IQ41520F0U50F - 50x1''1/2 IQ41520F0U50FXBU - 50x1''1/2 IQ41520F0U50G - 50x2'' IQ41520F0U50GXBU - 50x2'' IQ41520F0U63F - 63x1''1/2 IQ41520F0U63FXBU - 63x1''1/2 IQ41520F0U63G - 63x2'' IQ41520F0U63GXBU - 63x2'' IQ41620M0U20B - 20x1/2'' IQ41620M0U20BXBU - 20x1/2'' IQ41620M0U20C - 20x3/4'' IQ41620M0U20CXBU - 20x3/4'' IQ41620M0U25B - 25x1/2'' IQ41620M0U25BXBU - 25x1/2'' IQ41620M0U25C - 25x3/4'' IQ41620M0U25CXBU - 25x3/4'' IQ41620M0U25D - 25x1'' IQ41620M0U25DXBU - 25x1'' IQ41620M0U32C - 32x3/4'' IQ41620M0U32CXBU - 32x3/4'' IQ41620M0U32D - 32x1'' IQ41620M0U32DXBU - 32x1'' IQ41620M0U40E - 40x1''1/4 IQ41620M0U40EXBU - 40x1''1/4 IQ41620M0U40F - 40x1''1/2 IQ41620M0U40FXBU - 40x1''1/2 IQ41620M0U50F - 50x1''1/2 IQ41620M0U50FXBU - 50x1''1/2 IQ41620M0U50G - 50x2'' IQ41620M0U50GXBU - 50x2'' IQ41620M0U63G - 63x2'' IQ41620M0U63GXBU - 63x2'' IQ41820F0U20B - 20x1/2'' IQ41820F0U20BXBU - 20x1/2'' IQ41820F0U20C - 20x3/4'' IQ41820F0U20CXBU - 20x3/4'' IQ41820F0U25B - 25x1/2'' IQ41820F0U25BXBU - 25x1/2'' IQ41820F0U25C - 25x3/4'' IQ41820F0U25CXBU - 25x3/4'' IQ41820F0U25D - 25x1'' IQ41820F0U25DXBU - 25x1'' IQ41820F0U32C - 32x3/4'' IQ41820F0U32CXBU - 32x3/4'' IQ41820F0U32D - 32x1'' IQ41820F0U32DX00 - 32x1'' IQ41820F0U32DXBU - 32x1'' IQ41820F0U32E - 32x1''1/4 IQ41820F0U32EXBU - 32x1''1/4 IQ41820F0U40D - 40x1'' IQ41820F0U40DXBU - 40x1'' IQ41820F0U40E - 40x1''1/4 IQ41820F0U40EXBU - 40x1''1/4 IQ41820F0U40F - 40x1''1/2 IQ41820F0U50F - 50x1''1/2 IQ41820F0U50FXBU - 50x1''1/2 IQ41820F0U63F - 63x1''1/2 IQ41820F0U63G - 63x2'' IQ41820F0U63GXBU - 63x2'' IQ41920M0U20B - 20x1/2'' IQ41920M0U20BXBU - 20x1/2'' IQ41920M0U20C - 20x3/4'' IQ41920M0U20CXBU - 20x3/4'' IQ41920M0U25B - 25x1/2'' IQ41920M0U25BXBU - 25x1/2'' IQ41920M0U25C - 25x3/4'' IQ41920M0U25CXBU - 25x3/4'' IQ41920M0U25D - 25x1'' IQ41920M0U25DXBU - 25x1'' IQ41920M0U32C - 32x3/4'' IQ41920M0U32CXBU - 32x3/4'' IQ41920M0U32D - 32x1'' IQ41920M0U32DXBU - 32x1'' IQ41920M0U32E - 32x1''1/4 IQ41920M0U32EXBU - 32x1''1/4 IQ41920M0U40E - 40x1''1/4 IQ41920M0U40EXBU - 40x1''1/4 IQ41920M0U40F - 40x1''1/2 IQ41920M0U40FXBU - 40x1''1/2 IQ41920M0U50F - 50x1''1/2 IQ41920M0U50FXBU - 50x1''1/2 IQ41920M0U50G - 50x2'' IQ41920M0U50GXBU - 50x2'' IQ41920M0U63G - 63x2'' IQ41920M0U63GXBU - 63x2'' IQ4212000U200 - 20 IQ4212000U200XBU - 20 IQ4212000U250 - 25 IQ4212000U250XBU - 25 IQ4212000U320 - 32 IQ4212000U320XBU - 32 IQ4212000U400 - 40 IQ4212000U400XBU - 40 IQ4212000U500 - 50 IQ4212000U500XBU - 50 IQ4212000U630 - 63 IQ4212000U630XBU - 63 IQ42320F0U25C - 25x3/4'' IQ4242000U20A - 20x16x20 IQ4242000U20C - 20x25x20 IQ4242000U20CXBU - 20x25x20 IQ4242000U32C - 32x25x32 IQ4242000U32CXBU - 32x25x32 IQ4242000U40D - 40x32x40 IQ4242000U40DXBU - 40x32x40 IQ4242000U50E - 50x40x50 IQ4242000U50EXBU - 50x40x50 IQ4242000U63F - 63x50x63 IQ4242000U63FXBU - 63x50x63 IQ4402000U200 - 20X20 IQ4402000U250 - 25X25 IQ4402000U320 - 32X32 IQ4402000U400 - 40X40 IQ4402000U400XBU - 40X40 IQ4402000U500 - 50X50 IQ4402000U500XBU - 50X50 IQ4402000U630 - 63X63 IQ4402000U630XBU - 63X63 IQ40120F0P20B - 20x1/2'' IQ40120F0P20C - 20x3/4'' IQ40120F0P25B - 25x1/2'' IQ40120F0P25C - 25x3/4'' IQ40120F0P25D - 25x1'' IQ40120F0P32B -32x1/2'' IQ40120F0P32C -32x3/4'' IQ40120F0P32D -32x1'' IQ40120F0P32E -32x1''1/4 IQ40120F0P40D -40x1'' IQ40120F0P40E -40x1''1/4 IQ40120F0P40F -40x1''1/2 IQ40120F0P50E -50x1''1/4 IQ40120F0P50F -50x1''1/2 IQ40120F0P50G -50x2'' IQ40120F0P63E -63x1''1/4 IQ40120F0P63F -63x1''1/2 IQ40120F0P63G -63x2'' IQ4102000P200 -20 IQ4102000P250 -25 IQ4102000P320 -32 IQ4102000P400 -40 IQ4102000P500 -50 IQ4102000P630 -63 IQ41120M0P20B -20x1/2'' IQ41120M0P20C -20x3/4'' IQ41120M0P25B -25x1/2'' IQ41120M0P25C -25x3/4'' IQ41120M0P25D -25x1'' IQ41120M0P32C -32x3/4'' IQ41120M0P32D -32x1'' IQ41120M0P32E -32x1''1/4 IQ41120M0P40D -40x1'' IQ41120M0P40E -40x1''1/4 IQ41120M0P40F -40x1''1/2 IQ41120M0P50E -50x1''1/4 IQ41120M0P50F -50x1''1/2 IQ41120M0P50G -50x2'' IQ41120M0P63F -63x1''1/2 IQ41120M0P63G -63x2'' IQ4122000P20A -20x16 IQ4122000P25B -25x20 IQ4122000P32C -32x25 IQ4122000P40C -40x25 IQ4122000P40D -40x32 IQ4122000P50C -50x25 IQ4122000P50D -50x32 IQ4122000P50E -50x40 IQ4122000P63E -63x40 IQ4122000P63F -63x50 IQ4132000P200 -20 IQ4132000P250 -25 IQ4132000P320 -32 IQ4132000P400 -40 IQ4132000P500 -50 IQ4132000P630 -63 IQ4142000P200 -20 IQ4142000P250 -25 IQ4142000P320 -32 IQ4142000P400 -40 IQ4142000P500 - 50 IQ4142000P630 - 63 IQ41520F0P20B - 20x1/2'' IQ41520F0P20C - 20x3/4'' IQ41520F0P25B - 25x1/2'' IQ41520F0P25C - 25x3/4'' IQ41520F0P25D - 25x1'' IQ41520F0P32B - 32x1/2'' IQ41520F0P32C - 32x3/4'' IQ41520F0P32D - 32x1'' IQ41520F0P40D - 40x1'' IQ41520F0P40E - 40x1''1/4 IQ41520F0P40F - 40x1''1/2 IQ41520F0P50E - 50x1''1/4 IQ41520F0P50F - 50x1''1/2 IQ41520F0P50G - 50x2'' IQ41520F0P63F - 63x1''1/2 IQ41520F0P63G - 63x2'' IQ41620M0P20B - 20x1/2'' IQ41620M0P20C - 20x3/4'' IQ41620M0P25B - 25x1/2'' IQ41620M0P25C - 25x3/4'' IQ41620M0P25D - 25x1'' IQ41620M0P32C - 32x3/4'' IQ41620M0P32D - 32x1'' IQ41620M0P40E - 40x1''1/4 IQ41620M0P40F - 40x1''1/2 IQ41620M0P50F - 50x1''1/2 IQ41620M0P50G - 50x2'' IQ41620M0P63G - 63x2'' IQ41820F0P20B - 20x1/2'' IQ41820F0P20C - 20x3/4'' IQ41820F0P25B - 25x1/2'' IQ41820F0P25C - 25x3/4'' IQ41820F0P25D - 25x1'' IQ41820F0P32C - 32x3/4'' IQ41820F0P32D - 32x1'' IQ41820F0P32E - 32x1''1/4 IQ41820F0P40D - 40x1'' IQ41820F0P40E - 40x1''1/4 IQ41820F0P40F - 40x1''1/2 IQ41820F0P50F - 50x1''1/2 IQ41820F0P63F - 63x1''1/2 IQ41820F0P63G - 63x2'' IQ41920M0P20B - 20x1/2'' IQ41920M0P20C - 20x3/4'' IQ41920M0P25B - 25x1/2'' IQ41920M0P25C - 25x3/4'' IQ41920M0P25D - 25x1'' IQ41920M0P32C - 32x3/4'' IQ41920M0P32D - 32x1'' IQ41920M0P32E - 32x1''1/4 IQ41920M0P40E - 40x1''1/4 IQ41920M0P40F - 40x1''1/2 IQ41920M0P50F - 50x1''1/2 IQ41920M0P50G - 50x2'' IQ41920M0P63G - 63x2'' IQ4212000P200 - 20 IQ4212000P250 - 25 IQ4212000P320 - 32 IQ4212000P400 - 40 IQ4212000P500 - 50 IQ4212000P630 - 63 IQ42320F0P25C - 25x3/4'' IQ4242000P20A - 20x16x20 IQ4242000P20C - 20x25x20 IQ4242000P32C - 32x25x32 IQ4242000P40D - 40x32x40 IQ4242000P50E - 50x40x50 IQ4242000P63F - 63x50x63 IQ4402000P200 - 20X20 IQ4402000P250 - 25X25 IQ4402000P320 - 32X32 IQ4402000P400 - 40X40 IQ4402000P500 - 50X50 IQ4402000P630 - 63X63

Approval Holder:
Irritec S.p.A
Company Name
Irritec S.p.A
Address
Via G Conforto C Da S Lucia Capo d’Orlando (ME)
Postcode
98071
Country
Italy
General Email
irritec@irritec.com

View All Listings by this Company
Manufacturer:
Irritec S.p.A
Company Name
Irritec S.p.A
Address
Via G Conforto C Da S Lucia Capo d’Orlando (ME)
Postcode
98071
Country
Italy
General Email
irritec@irritec.com

View All Listings by this Company

Print This Approval


#240702052

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure: Fittings 15mm to 28mm 10.0 bar. Fittings 35mm to 54mm 6.0 bar. Maximum operating temperature 90°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240702052
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models.
Marking:
Tectite 316 & size on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
15mm TS1/TS270 Coupling 18mm TS1/TS270 Coupling 22mm TS1/TS270 Coupling 28mm TS1/TS270 Coupling 35mm TS1/TS270 Coupling 42mm TS1/TS270 Coupling 54mm TS1/TS270 Coupling 15mm TS1S/TS270S Slip Coupling 18mm TS1S/TS270S Slip Coupling 22mm TS1S/TS270S Slip Coupling 28mm TS1S/TS270S Slip Coupling 15mm x 1/2" TS2/TS270G Connector 18mm x 3/4" TS2/TS270G Connector 18mm x 1/2" TS2/TS270G Connector 22mm x 3/4" TS2/TS270G Connector 22mm x 1/2" TS2/TS270G Connector 22mm x 1" TS2/TS270G Connector 28mm x 3/4" TS2/TS270G Connector 28mm x 1" TS2/TS270G Connector 35mm x 1 1/4" TS2/TS270G Connector 42mm x 1 1/2" TS2/TS270G Connector 54mm x 2" TS2/TS270G Connector 15mm x 1/2" TS3/TS243G Connector 18mm x 3/4" TS3/TS243G Connector 18mm x 1/2" TS3/TS243G Connector 22mm x 3/4" TS3/TS243G Connector 22mm x 1/2" TS3/TS243G Connector 28mm x 3/4" TS3/TS243G Connector 28mm x 1" TS3/TS243G Connector 35mm x 1 1/4" TS3/TS243G Connector 42mm x 1 1/2" TS3/TS243G Connector 54mm x 2" TS3/TS243G Connector 18 x 15mm TS6/TS243 Reducer 22 x 15mm TS6/TS243 Reducer 22 x 18mm TS6/TS243 Reducer 28 x 15mm TS6/TS243 Reducer 28 x 18mm TS6/TS243 Reducer 28 x 22mm TS6/TS243 Reducer 35 x 22mm TS6/TS243 Reducer 35 x 28mm TS6/TS243 Reducer 42 x 22mm TS6/TS243 Reducer 42 x 28mm TS6/TS243 Reducer 42 x 35mm TS6/TS243 Reducer 54 x 35mm TS6/TS243 Reducer 54 x 42mm TS6/TS243 Reducer 15mm TS12/TS090 Elbow 18mm TS12/TS090 Elbow 22mm TS12/TS090 Elbow 28mm TS12/TS090 Elbow 35mm TS12/TS090 Elbow 42mm TS12/TS090 Elbow 54mm TS12/TS090 Elbow 15mm TS12S/TS092 Street Elbow 18mm TS12S/TS092 Street Elbow 22mm TS12S/TS092 Street Elbow 28mm TS12S/TS092 Street Elbow 15mm x 1/2" TS13/TS092G Elbow 18mm x 1/2" TS13/TS092G Elbow 22mm x 3/4" TS13/TS092G Elbw , 28mm x 1" TS13/TS092G Elbow 15mm x 1/2" TS14/TS090G Elbow 18mm x 1/2" TS14/TS090G Elbow 18mm x 3/4" TS14/TS090G Elbow 22mm x 3/4" TS14/TS090G Elbow 28mm x 1" TS14/TS090G Elbow 15mm x 1/2" TS15/TS471G Backplate Elbow 18mm x 1/2" TS15/TS471G Backplate Elbow 22mm x 3/4" TS15/TS471G Backplate Elbow 15mm TS18/TS002A Slow Bend 18mm TS18/TS002A Slow Bend 22mm TS18/TS002A Slow Bend 28mm TS18/TS002A Slow Bend 35mm TS18/TS002A Slow Bend 42mm TS18/TS002A Slow Bend 54mm TS18/TS002A Slow Bend 15mm TS18S/TS001 Elbow 18mm TS18S/TS001 Elbow 22mm TS18S/TS001 Elbow 28mm TS18S/TS001 Elbow 15mm TS21/TS041 Obtuse Elbow 18mm TS21/TS041 Obtuse Elbow 22mm TS21/TS041 Obtuse Elbow 28mm TS21/TS041 Obtuse Elbow 35mm TS21/TS041 Obtuse Elbow 42mm TS21/TS041 Obtuse Elbow 54mm TS21/TS041 Obtuse Elbow 15mm TS21S/TS040 Obtuse Street Elbow 18mm TS21S/TS040 Obtuse Street Elbow 22mm TS21S/TS040 Obtuse Street Elbow 28mm TS21S/TS040 Obtuse Street Elbow 35mm TS21S/TS040 Obtuse Street Elbow 42mm TS21S/TS040 Obtuse Street Elbow 15mm TS24/TS130 Tee 18mm TS24/TS130 Tee 22mm TS24/TS130 Tee 28mm TS24/TS130 Tee 35mm TS24/TS130 Tee 42mm TS24/TS130 Tee 54mm TS24/TS130 Tee 18 x 18 x 15mm TS25/TS130 Tee 22 x 22 x 15mm TS25/TS130 Tee 22 x 22 x 18mm TS25/TS130 Tee 28 x 28 x 15mm TS25/TS130 Tee 28 x 28 x 18mm TS25/TS130 Tee 28 x 28 x 22mm TS25/TS130 Tee 35 x 35 x 15mm TS25/TS130 Tee 35 x 35 x 22mm TS25/TS130 Tee 35 x 35 x 28mm TS25/TS130 Tee 42 x 42 x 28mm TS25/TS130 Tee 54 x 54 x 22mm TS25/TS130 Tee 54 x 54 x 28mm TS25/TS130 Tee 15 x 15mm x 1/2" TS30/TS130G Tee 18 x 18mm x 1/2" TS30/TS130G Tee 22 x 22mm x 1/2" TS30/TS130G Tee 22 x 22mm x 3/4" TS30/TS130G Tee 28 x 28mm x 1/2" TS30/TS130G Tee 35 x 35mm x 1/2" TS30/TS130G Tee 42 x 42mm x 1/2" TS30/TS130G Tee 15mm TS61/TS301 Stop End 18mm TS61/TS301 Stop End 22mm TS61/TS301 Stop End 28mm TS61/TS301 Stop End 35mm TS61/TS301 Stop End 42mm TS61/TS301 Stop End 54mm TS61/TS301 Stop End 15mm x 1/2" TS62/TS062 Tap Connector 22mm x 3/4" TS62/TS062 Tap Connector

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company
Manufacturer:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#240702050

Range of compression fitting with brass and DZR brass bodies, supplied with brass compression rings. For use with copper tube (manufactured to BS EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240702050
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
Marking: Conex Sanbra & size on body. DZR brass models also have CR on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
Model: Conex Compression range. 303 D021020303- - 12 x 3/8” D031020303- - 12 x ½” E021020303- - 15 x 3/8” E031020303- - 15 x ½” E041020303- - 15 x ¾” E051020303- - 15 x 1” F031020303- - 18 x ½” F041020303- - 18 x ¾” G031020303- - 22 x ½” G041020303- - 22 x ¾” G051020303- - 22 x 1” H051020303- - 28 x 1” H061020303- - 28 x 1-1/4” B015020303 - 8 x ¼” B025020303 - 8 x 3/8” B035020303 - 8 x ½” C015020303 – 10 x ¼” C025020303 – 10 x 3/8” C035020303 – 10 x ½” D025020303 – 12 x 3/8” D035020303 – 12 x ½” E025020303 – 15 x 3/8” E035020303 – 15 x ½” E045020303 – 15 X ¾” F035020303 – 18 x ½” F045020303 – 18 x ¾” G045020303 – 22 x ¾” G055020303 – 22 x 1” H045020303 – 28 x ¾” H055020303 – 28 x 1” J055020303 – 35 x 1” J065020303 – 35 x 1-1/4” K075020303 – 42 x 1-1/2” N085020303 – 54 x 2” 303SF E031020303SF – 15 x ½” G041020303SF – 22 x ¾” E035020303SF – 15 x ½” E045020303SF – 15 x ¾” G045050303SF – 22 x ¾” 303ST E031020303ST – 15MM E041020303ST – 15MM G041020303ST – 22MM 321 E- - 1020321- - 15MM G- - 1020321- - 22MM H- - 1020321- - 28MM J- - 1020321- - 35MM K- - 5020321- - 42MM N- - 5020321- - 54MM 323 D- - 1020323- - 12MM E- - 1020323- - 15MM G- - 1020323- - 22MM H- - 1020323- - 28MM B- - 5020323- - 8MM C- - 5020323- - 10MM D- - 5020323- - 12MM E- - 5020323- - 15MM F- - 5020323- - 18MM G- - 5020323- - 22MM H- - 5020323- - 28MM J- - 5020323- - 35MM K- - 5020323- - 42MM N- - 5020323- - 54MM 401 DD-1020401- - 12MM EE-1020401- - 15MM FF-1020401- - 18MM GG-1020401- - 22MM HH-1020401- - 28MM JJ-1020401- - 35MM KK-1020401- - 42MM NN-1020401- - 54MM BB-5020401- - 8MM CC-5020401- - 10MM DD-5020401- - 12MM EE-5020401- - 15MM FF-5020401- - 18MM GG-5020401- - 22MM HH-5020401- - 28MM JJ-5020401- - 35MM KK-5020401- - 42MM 401R ED-1020401- - 15x12MM GE-1020401- - 22x15MM DC-5020401- - 12x10MM EC-5020401- - 15x10MM GE-5020401- - 22x15MM HG-5020401- - 28x22MM 401DA EE-1020401DA – 15MM GG-1020401DA – 22MM HH-1020401DA – 28MM 401/O EE-1020401/O – 15MM GG-1020401/O – 22MM HH-1020401/O – 28MM S401S EE-5020401S- 15MM GG-5020401S – 22MM HH-5020401S – 28MM 401V EE-1020401V- 15MM GG-1020401V – 22MM 402 E031020402- - 15 x ½” E041020402- - 15 x ¾” F031020402- - 18 x ½” G041020402- - 22 x ¾” G051020402- - 22 x 1” H041020402- - 28 x ¾” H051020402- - 28 x 1” B015020402- - 8 x ¼” C025020402- - 10 x 3/8” C035020402- - 10 x ½” D025020402- - 12 x 3/8” D035020402- - 12 x ½” E025020402- - 15 x 3/8” E035020402- - 15 x ½” E045020402- - 15 x ¾” F035020402- - 18 x ½” F045020402- - 18 x ¾” G035020402- - 22 x ½” G045020402- - 22 x ¾” H055020402- - 28 x 1” J065020402- - 35 x 1-1/4” K075020402- - 42 x 1-1/2” 402PCB E031020402CB – 15 x ½” x 38MM G041020402CB – 22 x ½” x 38MM 402TA – D021020402TA – 12 x 3/8” D031020402TA – 12 x ½” E021020402TA – 15 x 3/8” E031020402TA – 15 x ½” E041020402TA – 15 x ¾” F041020402TA – 18 x ¾” G041020402TA – 22 x ¾” G051020402TA – 22 x 1” H051020402TA – 28 x 1” 403 D031020403- - 12 X ½” E031020403- - 15 x ½” E041020403- - 15 x ¾” F031020403- - 18 x ½” F041020403- - 18 x ¾” G031020403- - 22 x ½” G041020403- - 22 x ¾” G051020403- - 22 x 1” H041020403- - 28 x ¾” H051020403- - 28 x 1” K071020403- - 42 x 1-1/2” B015020403- - 8 x ¼” C025020403- - 10 x 3/8” C035020403- - 10 x ½” D025020403- - 12 x 3/8” D035020403- - 12 x ½” E025020403- - 15 x 3/8” E035020403- - 15 x ½” E045020403- - 15 x ¾” F045020403- - 18 x ¾” G035020403- - 22 x ½” G045020403- - 22 x ¾” H055020403- - 28 x 1” J065020403- - 35 x 1-1/4” 403SF E031020403SF – 15 x ½” G031020403SF – 22 x ½” G041020403SF – 22 x ¾” E035020403SF – 15 x ½” 403W E031020403W- 15 x ½” E035020403W- 15 x ½” 403WL E031020403WE – 15 x ½” E031020403WL – 15 x ½” G031020403WL – 22 x ½” C035020403WL – 10 x ½” D035020403WL – 12 x ½” E035020403WL – 15 x ½” G045020403WL – 22 x ¾” 601EQ DDD1020601EQ – 12MM EEE1020601EQ – 15MM FFF1020601EQ – 18MM GGG1020601EQ – 22MM HHH1020601EQ – 28MM BBB5020601EQ – 8MM CCC5020601EQ – 10MM DDD5020601EQ – 12MM EEE5020601EQ – 15MM FFF5020601EQ – 18MM GGG5020601EQ – 22MM HHH5020601EQ – 28MM JJJ5020601EQ – 35MM KKK5020601EQ – 42MM 601RB GGE1020601- - 22 x 22 x 15MM HHE1020601- - 28 x 28 x 15MM HHG1020601- - 28 x 28 x 22MM NNE1020601- - 54 x 54 x 15MM NNG1020601- - 54 x 54 x 22MM NNH1020601- - 54 x 54 x 28MM DDC5020601- - 12 x 12 x 10MM EEC5020601- - 15 x 15 x 10MM EED5020601- - 15 x 15 x 12MM FFD5020601- - 18 x 18 x 12MM FFE5020601- - 18 x 18 x 15MM GGD5020601- - 22 x 22 x 12MM GGE5020601- - 22 x 22 x 15MM GGF5020601- - 28 x 28 x 18MM HHE5020601- - 28 x 28 x 15MM HHG5020601- - 28 x 28 x M22M JJE5020601- - 35 x 35 x 15MM JJG5020601- - 35 x 35 x 22MM JJH5020601- - 42 x 42 x 28MM KKE5020601- - 42 x 42 x 15MM KKG5020601- - 42 x 42 x 22MM KKH5020601- - 42 x 42 x 28MM KKJ5020601- - 42 x 42 x 35MM 601RE GEG1020601- - 22 x 15 x 22MM HEH1020601- - 28 x 15 x 28MM GEG5020601- - 22 x 15 x 22MM HGH5020601- - 28 x 22 x 28MM 601REB GEE1020601- - 22 x 15 x 15MM EDD5020601- - 15 x 12 x 12MM GEE5020601- - 22 x 15 x 15MM HGG5020601- - 28 x 22 x 22MM 601REE EEG1020601- - 15 x 15 x 22MM GGH5020601- - 22 x 22 x 28MM 615 EE35020615- - 15 x 15 x ½” GG35020615- - 22 x 22 x ½” GG45020615- - 22 x 22 x ¾” 617 EE11020617- - 15 x 15 x ¼” Ee31020317- - 15 x 15 x ½” EE41020617- - 15 x 15 x ¾” FF31020617- - 18 x 18 x ½” GG31020617- - 22 x 22 x ½” GG51020617- - 22 x 22 x 1” HH41020617- - 28 x 28 x ¾” DD2502617- - 12 x 12 x 3/8” DD3502617- - 12 x 12 x ½” EE3502617- - 15 x 15 x ½” GG3502617- - 22 x 22 x ½” GG4502617- - 22 x 22 x ¾” HH3502617- - 28 x 28 x ½” HH5502617- - 28 x 28 x 1” EE3502617W- - 15 x 15 x ½” GG3502617W- - 22 x 22 x ½” E3E502631- - 15 x ½” x 15MM G4G502631- - 22 x ¾” x 22MM 631 G4G1020631 – 22 x ¾” x 22MM 645 33E1020645- - 22 x ¾” x 22MM 684 G3G1020684 – 22 x ½” x 22MM G4G1020684 – 22 x ¾” X 22MM E3E5020684- - 15 x ½” x 15MM 901 GGGG1020901 – 22 x 22 x 22 x 22MM 301 DD-1020301- - 12MM TT-1020301- - 14MM EE-1020301- - 15MM UU-1020301- - 16MM FF-1020301- - 18MM VV-1020301- - 20MM GG-1020301- - 22MM HH-1020301- - 28MM JJ-1020301- - 35MM 301BH EE-1020301BH – 15mm 301BP DZB1020301BP – 12mm EZB1020301BP – 15mm GZB1020301BP – 22mm 301CO EE5020301CO – 15mm GG5020301CO – 22mm 301DA EE-1020301DA – 15mm GG-1020301DA – 22mm 301V EE-1020301V- 302 D011020302 – 12 x ¼” D021020302 – 12 x -3/8” D031020302 – 12 x ½” E011020302 – 15 x 1/4” E021020302 – 15 x 3/8” E031020302 – 15 x ½” E041020302 – 15 x ¾” F031020302 – 18 x ½” F041020302 – 18 x ¾” G031020302 – 22 x ½” G041020302 – 22 x ¾” G051020302 – 22 x 1” H051020302 – 28 x 1” H061020302 – 28 x 1-1/4” J061020302 – 35 x 1-1/4” K071020302 – 42 x 1-1/2” N081020302 – 54 X 2” 302B E031020302B – 15 x ½” G041020302B- 22 x ¾” H051020302B – 28 x 1” J061020302B – 35 x 1-1/4” K071020302B- 42 x 1-1/2” N081020302B – 54 x2” 302CB E031020302CB – 15 x ½” G041020302CB – 22 x ¾” 302TA D021020302TA – 12 x 3/8” D031020302TA – 12 x ½” T031020302TA – 14 x ½” E021020302TA – 15 x 3/8” E031020302TA – 15 x ½” E041020302TA – 15 x ¾” U031020302TA – 16 x ½” U041020302TA – 16 x ¾” F031020302TA – 18 x ½” F041020302TA – 18 x ¾” G031020302TA – 22 x ½” G041020302TA – 22 x ¾” G051020302TA – 22 x 1” H041020302TA – 28 x ¾” H051020302TA – 28 x 1” 401 ED-1020401 - - 15 x 12mm GE-1020401- - 22 x 15mm 403WE E031020403WE – 15 x ½” 601C EEE5020601C- 15mm GGG5020601C- 22mm

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

Print This Approval


#240902042

Range of ‘B’ Press XL copper crimped fittings with EPDM ‘O’-rings for use with copper pipe to BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240902042
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models Below
Marking:
>‘B’<, Size and DVGW
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
P5001 90° Street Bend P5001 06400000 – 64MM P5001 06700000 – 67MM P5001 07600000 – 76MM P5001 08900000 – 89MM P5001 10800000 – 108MM P5002 90° Bend P5002 06400000 – 64MM P5002 06700000 – 67MM P5002 07600000 – 76MM P5002 08900000 – 89MM P5002 10800000 – 108MM P5040 45° Obtuse Street Elbow P5040 06400000 – 64MM P5040 06700000 – 67MM P5040 07600000 – 76MM P5040 08900000 – 89MM P5040 10800000 – 108MM P5041 45° Obtuse Elbow P5041 06400000 – 64MM P5041 06700000 – 67MM P5041 07600000 – 76MM P5041 08900000 – 89MM P5041 10800000 – 108MM P5130 Equal Tee P5130 06400000 – 64MM P5130 06700000 – 67MM P5130 07600000 – 76MM P5130 08900000 – 89MM P5R 108108108 – 108MM P5130G Tee with Female Branch P5130G06406640 – 64 x ¾” BSP x 64MM P5130G06408640 – 64 x 1” BSP X 64MM P5130G06416640 – 64 x 2” BSP X 64MM P5130G06706670 – 67 x ¾” BSP x 67MM P5130G06716670 – 67 x 2” BSP x 67MM P5130G07606760 – 76 x ¾” BSP x 76MM P5130G07616760 – 76 x 2” BSP x 76MM P5130G08906890 – 89 x ¾” BSP x 89MM P5130G08916890 – 89 x 2” BSP x 89MM P5RG108061080 – 108 x ¾” BSP x 108MM P5RG108161080 – 108 x 2” BSP x 108MM P5130RB Tee Reduced Branch P5130 06435640 – 64 x 35 x 64MM P5130 06442650 – 64 x 42 x 64MM P5130 06454640 – 64 x 54 x 64MM P5130 06728670 – 67 x 28 x 67MM P5130 06735670 – 67 x 35 x 67MM P5130 06742670 – 67 x 42 x 67MM P5130 06754670 – 67 x 54 x 67MM P5130 07628760 – 76 x 28 x 76MM P5130 07635760 – 76 x 35 x 76MM P5130 07642760 – 76 x 42 x 76MM P5130 07654760 – 76 x 54 x 76MM P5130 07664760 – 76 x 64 x 76MM P5130 07667760 – 76 x 67 x 76MM P5130 08954890 – 89 x 54 x 89MM P5130 08964890 – 89 x 64 x 89MM P5130 08976890 – 89 x 76 x 89MM P5R 0108054108 – 108 x 54 x 108MM P5R 0108064108 – 108 x 64 x 108MM P5R 0108076108 – 108 x 76 x 108MM P5R 0108089108 – 108 x 89 x 108MM P5230B Flange 45° P5230B06400000 – 64MM P5230B06700000 – 67MM P5230B07600000 – 76MM P5230 076000UK – 76MM P5230B08900000 – 89MM P5230B10800000 – 108MM P5243 Fitting Reducer P5243 06435000 – 64 x 35MM P5243 06442000 – 64 x 42MM P5243 06454000 – 64 X 54MM P5243 06728000 – 67 x 28MM P5243 06735000 – 67 x 35MM P5243 06742000 – 67 x 42MM P5243 06754000 – 67 x 54MM P5243 07628000 – 76 x 28MM P5243 07635000 – 76 x 35MM P5243 07642000 – 76 x 42MM P5243 07654000 – 76 x 54MM P5243 07664000 – 76 x 64MM P5243 07667000 – 76 x 67MM P5243 08954000 – 89 x 54MM P5243 08964000 – 89 x 64MM P5243 08976000 – 89 x 76MM P5243 10854000 – 108 x 54MM P5243 10864000 – 108 x 64MM P5243 10876000 – 108 x 76MM P5243 10889000 – 108 x 89MM P5243G Male Threaded Straight Connector P5243G064200000 – 64 x 2-1/2” BSP P5243G067200000 – 67 x 2-1/2” BSP P5243G076200000 – 76 x 2-1/2” BSP P5243G076024000 – 76 x 3” BSP P5243G089240000 – 89 x 3” BSP P5243G10832000 – 108 X 4” BSP P5270 Straight Connector P5270 06400000 – 64MM P5270 06700000 – 67MM P5270 07600000 – 76MM P5270 08900000 – 89MM P5270 10800000 – 108MM P5270G Female Threaded Straight Connector P5270G06420000 – 64 x 2-1/2” BSP P5270G06720000 – 67 x 2-1/2” BSP P5270G07620000 – 76 x 2-1/2” BSP P5270G07624000 – 76 x 3” BSP P5270G08924000 – 89 x 3” BSP P5270G10832000 – 108 x 4” BSP P5275 Repair Coupling P5275 06400000 – 64MM P5275 06700000 – 67MM P5275 07600000 – 76MM P5275 08900000 – 89MM P5275 10800000 – 108MM P5301 End Cap P5301 06400000 – 64MM P5301 06700000 – 67MM P5301 07600000 – 76MM P5301 08900000 – 89MM P5301 10800000 – 108MM

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

Print This Approval


#240704716

Range of dual flush WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
240704716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
55.16mm OD
Marking:
ING, Model No. on body
Installation Requirements:
R001 R571 R582
Expiry date:
31/07/2029
Model:
B404001 Mechanical flush valve B405001 Pneumatic flush valve

Approval Holder:
Xiamen Ing Sanitary Fittings Ltd.
Company Name
Xiamen Ing Sanitary Fittings Ltd.
Address
2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen
Country
China
Phone
0086 0592 5669770 803
General Email
sales2@ing-sanitary.com

View All Listings by this Company
Manufacturer:
Xiamen Ing Sanitary Fittings Ltd.
Company Name
Xiamen Ing Sanitary Fittings Ltd.
Address
2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen
Country
China
Phone
0086 0592 5669770 803
General Email
sales2@ing-sanitary.com

View All Listings by this Company

Print This Approval


#240902017

Range of copper or stainless-steel brazed heat exchangers available with various number of plates as listed below. Maximum working pressure 25.0 Bar (copper brazed models). Maximum working pressure 10.0 Bar (stainless steel brazed models). Maximum operating temperature 100.0°C.

Section:
1350 Heat Exchangers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
4G3/4 models = ¾” BSP, 4AYB models = 8mm porthole (XB05H-1-xx-2STS_10/10_S1_4AYB Only) or 15mm porthole for all other models, 4clip models = 15mm ID clip connection.
Marking:
DANFOSS logo, model code, date of manufacture (YYYY/WW), PN and other technical data laser engraved into the body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
XB05M-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2CU_25/25_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4AYB, XB05X-1-xx-2CU_25/25_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-xx-2STS_10/10_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-20-2CU_25/25_S1_4Clip, XB05X-1-20-2STS_10/10_S1_4Clip, XB05H-1-xx-2CU_25/25_S1_4Clip, XB05H-1-xx-2STS_10/10_S1_4Clip. XB05 - frame size (XB05 = 312 mm x 76 mm) M, X, H - heatplate corrugation (different dimple design) - 1 - one pass heat exchanger (all XB05 range is one pass) “xx” = number of plates from 8 to 70. HP material = always 2; meaning material of heatplate which is always 1.4404. Brazing material = Stainless steel brazed = StS, Copper brazed = Cu. Pressure = approved pressure for primary and secondary channels (for XB05 is 25 bar when copper brazed and 10 bar when stainless steel brazed visible from application list in 202_f2). Connection configuration = position of connections (on XB05 only S1 applies). Connection type = G3/4 threaded ¾ connections AYB -no connections. Clip - tailormade solder and / or clip connections; usually tailormade for specific customer.

Approval Holder:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company

Print This Approval


#240708004

Range of ultrasonic water meters models U-WR have brass bodies and models U-WR2 have plastic bodies. The inlets incorporate a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50⁰C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Manufacturers logo and barcode, size and technical data laser etched under digital display cover of the plastic bodied U-WR2 models and on the top of the body and display cover of the brass bodied U-WR models. Flow arrow on the plastic case of both models
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
U-WR (brass bodied) - DN15 / ¾" (M), DN20 / 1" (M). U-WR2 (plastic bodied) - DN15 / ¾" (M), DN20 / 1" (M), DN25 / 1 1/4’’ (M). Models added December 2024: U-WR2 (plastic bodied with pressure sensor) - DN15 / ¾" (M), DN20 / 1" (M), DN25 / 1 1/4’’ (M).

Approval Holder:
Viewshine Metering Ltd.
Company Name
Viewshine Metering Ltd.
Address
Building 6, Moganshan Road 1418-41 Hangzhou Zhejiang Province
Country
China
Phone
15267464630
General Email
xiongdong@viewshine.cn

View All Listings by this Company

Print This Approval


#240702071

Range of water meters with cast iron bodies (blue epoxy coating) and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50 (200mm) & DN150 (500mm)
Marking:
SENSUS on cover. Cordonel, DN, Max pressure and other technical information on meter face. Size on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
GN Q3 40 – Cordonel DN50 (200mm) GN Q3 400 – Cordonel DN150 (500mm)

Approval Holder:
Sensus UK Systems Ltd
Company Name
Sensus UK Systems Ltd
Address
North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU
Country
Basingstoke

View All Listings by this Company
Manufacturer:
Sensus GmbH Hannover
Company Name
Sensus GmbH Hannover
Address
Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company

Print This Approval


#2311099

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperatures Sizes DN15-25 models: 50°C, sizes DN32-40 models: 85°C.

Section:
1505 Water Meters
Size:
See model.
Marking:
GAER and product info on dial. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
GMS DN15 GAER: ¾” BSP (M), GMS DN20 GAER: 1” BSP (M), GMS DN25 GAER: 1¼” BSP (M). GMS DN32 GAER: 1½” BSP (M), GMS DN40 GAER: 2” BSP (M).

Approval Holder:
Hidroglobal Tecnologia del Agua S.A.
Company Name
Hidroglobal Tecnologia del Agua S.A.
Address
C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS
Postcode
08150
Country
Spain
Phone
+34 93 573 74 00
General Email
calidad@hidroglobal.com

View All Listings by this Company

Print This Approval


#240902018

Range of in-line water meters with brass bodies. The inlets incorporate a plastic filter. The outlets incorporate a non-return valve (not intended for or suitable for backflow protection). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M), 1” BSP (M) & 1¼” BSP (M) Sizes Added December 2025: 1.1/2” BSP (M) & 2” BSP (M)
Marking:
Shenzhen Kaifa logo, date of manufacture (YYYY), model & technical info on meter face.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
MA408K

Approval Holder:
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Company Name
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Address
No 99 Tianquan Hi Tech Development Zone Chengdu PRC
General Email
xingweiyang@kaifa.com

View All Listings by this Company
Manufacturer:
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Company Name
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Address
No 99 Tianquan Hi Tech Development Zone Chengdu PRC
General Email
xingweiyang@kaifa.com

View All Listings by this Company

Print This Approval


#240704026

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Rubinetteria logo, Made in Italy, temperature and pressure cast on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
145.12 - Stopshock 145.
Product Images

Approval Holder:
Rubinetteria Malgorani Pietro Srl
Company Name
Rubinetteria Malgorani Pietro Srl
Address
Via per Invorio 24 Colazza
Postcode
28010
Country
Italy
Phone
+39335453853
General Email
contact@malgorani.it

View All Listings by this Company
Manufacturer:
Rubinetteria Malgorani Pietro Srl
Company Name
Rubinetteria Malgorani Pietro Srl
Address
Via per Invorio 24 Colazza
Postcode
28010
Country
Italy
Phone
+39335453853
General Email
contact@malgorani.it

View All Listings by this Company

Print This Approval


#240704057

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
CIM & Made in Italy on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
CIM 1450 – Water Hammer shock absorber

Approval Holder:
Cimberio S.p.A
Company Name
Cimberio S.p.A
Address
Via Torchio, 57 San Maurizio d’Opaglio
Postcode
28017
Country
Italy
Phone
+39.0322.923001
General Email
tguidetti@cimberio.it

View All Listings by this Company

Print This Approval


#240902039

Range of VEGAPULS radar sensors for level measurement with plastic bodies. Cold water use only. Open outlet use only.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model key
Marking:
VEGA logo date of manufacturer (YYYY), serial number and other technical data on body
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
PSC21.ab-c-d-N-f-g-h-I VEGAPULS C 21 PSC22.ab-c-d- N -f-g-h-I VEGAPULS C 22 PSC23.ab-c-d- N -f-g-h-I VEGAPULS C 23 PS21.ab-c-d- N -f-g-h-I VEGAPULS 21 PS31.ab-c-d- N -f-g-h-I VEGAPULS 31 KEY FOR VEGAPULS C 21 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; G Thread G1½ / G1 N Thread 1½NPT / 1NPT R Thread R1½ / R1 g = Cable material / Length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 22 ab = Explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignition proof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as: X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 23 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; F Thread G1 M Thread 1NPT Q Thread R1 g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS 21 / 31 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) AX without, for Ex-free area (CE, UKCA, RCM) VC ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) SC EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 TC CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 WC INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 c = Approved as overfill protection, which can be displayed as; X Without W With (WHG, VLAREM) d = Ship approval, which can be displayed as; X Without S With (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff/Pharmaceutical certificate, which can be displayed as X Without N With (NSF/ANSI/CAN 61) P With (NIH) F With (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable entry / connection, which can be displayed as; M M20x1.5 / Cable gland PA black (ø5-9mm), standard h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART i = Sensor setting via smartphone and VEGA Tools app X Without B With

Approval Holder:
VEGA Grieshaber KG
Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company
Manufacturer:
VEGA Grieshaber KG
Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company

Print This Approval


#240704008

Concealed, floor mounted basic set with DZR brass body. For use with floor standing combination tap assemblies. Maximum operating pressure 10 bar. Maximum operating temperature 70°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240704008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Hansgrohe & DR
Installation Requirements:
R001 R010
Expiry date:
31/07/2029
Model:
10452180

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240702708

Range of click type pop-up wastes (brass or plastic bodies - various finishes, see model).

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240702708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1¼” BSP (M).
Marking:
ISI on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
Plastic body: S8803XX, B952298XX Brass body: E1482XX, B953262XX Where XX denotes finish and can be replace by: All models: AA = Chrome. B953262XX model only: A2 = Brushed Gold, A5 = Magnetic Grey, GN = Silver Storm, XG = Silk Black.

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240704721

Range of multistage pumps with brass impellers and stainless steel shaft, incorporating an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240704721
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
Tucson, model number, product name and other technical parameters on adhesive label on terminal box; Tucson etched on pump head.
Installation Requirements:
R001 R415
Expiry date:
31/07/2029
Model:
Positive Head Twin Impeller Shower Pump SBT-2 Maximum head: 2 Bar Rated power: 0.5kW SBT-3 Maximum head: 3 Bar Rated power: 0.67kW SBT-4 Maximum head: 4 Bar Rated power: 0.9kW Positive Head Single Impeller Shower Pump SBS-3 Maximum head: 3 Bar Rated power: 0.37kW Universal Head Twin Impeller Shower Pump UBT-2 Maximum head: 2 Bar Rated power: 0.5kW UBT-3 Maximum head: 3 Bar Rated power: 0.67kW UBT-4 Maximum head: 4 Bar Rated power: 0.9kW Universal Head Single Impeller Shower Pump UBS-3 Maximum head: 3 Bar Rated power: 0.37kW

Approval Holder:
Tucson Pumps Ltd.
Company Name
Tucson Pumps Ltd.
Address
Instantor Works, Santry Avenue, Dublin, D09 K160
Country
Ireland

View All Listings by this Company

Print This Approval


#240704724

Range of single or twin shower pumps with brass bodies, brass impeller supplied with flexible connection hoses that incorporate servicing valves. Maximum Working pressure 6 Bar Maximum operating temperature 65°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240704724
Size:
ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). OEM 44741: Monsoon U4.5 bar Single: ¾” BSP (M) (inlet/outlet) (No hose provided). All other models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).
Marking:
Adhesive label on body stating Stuart Turner, model no, serial no, part no, pressure rating, Monsoon, Manufacturer address and other technical information Expansion vessel labelled with volume and pressure rating
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
46505: Monsoon U1.5 bar Twin, 46498: Monsoon U2.0 bar Single, 46480: Monsoon U2.0 bar Twin, 46414: Monsoon U4.5 bar Single, 46413: Monsoon U3.0 bar Single, 46412: Monsoon U4.5 bar Twin, 46411: Monsoon U4.0 bar Twin, 46410: Monsoon U3.0 bar Twin, OEM 44741: Monsoon U4.5 bar Single, 44427: Monsoon U3.0 bar Twin, 44426: Monsoon U2.0 bar Twin, 44425: Monsoon U2.0 bar Single, OEM 44340: Monsoon U2.0 bar Twin, 44753: Monsoon U1.5 bar Twin, 46505ROI: Monsoon U1.5 bar Twin, 46498ROI: Monsoon U2.0 bar Single, 46480ROI: Monsoon U2.0 bar Twin, 46414ROI: Monsoon U4.5 bar Single, 46413ROI: Monsoon U3.0 bar Single, 46412ROI: Monsoon U4.5 bar Twin, 46411ROI: Monsoon U4.0 bar Twin, 46410ROI: Monsoon U3.0 bar Twin, 46505EXP: Monsoon U1.5 bar Twin, 46498EXP: Monsoon U2.0 bar Single, 46480EXP: Monsoon U2.0 bar Twin, 46414EXP: Monsoon U4.5 bar Single, 46413EXP: Monsoon U3.0 bar Single, 46412EXP: Monsoon U4.5 bar Twin, 46411EXP: Monsoon U4.0 bar Twin, 46410EXP: Monsoon U3.0 bar Twin.

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#240707001

‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only. ‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240707001
Note:
Approval doesn’t include pressure vessels.
Size:
Small Booster Sets Systems with 2 to 3 Pumps = 2” BSP (M), Systems with 4 to 6 pumps = 2½” BSP (M). Medium Booster Sets Systems with CRI(E)10 pumps: Systems with 2 to 3 pumps = 2½” BSP (M), Systems with 4 to 5 pumps = DN80 flanges, Systems with 6 pumps = DN100 flanges. Systems with CRI(E)15 and CRI(E)20 pumps: Systems with 2 pumps = DN80 flanges, Systems with 3 to 4 pumps = DN100 flanges, Systems with 5 to 6 pumps = DN150 flanges. Sizes added November 2024: Large Booster Sets Systems with CR(E)32 pumps: Systems with 2 pumps = DN100 flanges, Systems with 3 to 6 pumps = DN150 flanges. Systems with CR(E)45 and CR(E)64 pumps: Systems with 2 pumps = DN150 flanges, Systems with 3 to 6 pumps = DN200 flanges.
Marking:
Grundfos logo, model, serial number, P/N, manufacturing country and technical information on adhesive label on base frame.
Installation Requirements:
R001 R008 R415
Expiry date:
31/07/2029
Model:
Small Booster Sets (PN16): HYDRO MPC-E “X” CRIE3, HYDRO MPC-E “X” CRIE5, HYDRO MPC-F “X” CRI3, HYDRO MPC-F “X” CRI5, HYDRO MPC-S “X” CRI3, HYDRO MPC-S “X” CRI5. Medium Booster Sets (PN16): HYDRO MPC-E “X” CRIE10, HYDRO MPC-E “X” CRIE15, HYDRO MPC-E “X” CRIE20, HYDRO MPC-F “X” CRI10, HYDRO MPC-F “X” CRI15, HYDRO MPC-F “X” CRI20, HYDRO MPC-S “X” CRI10, HYDRO MPC-S “X” CRI15, HYDRO MPC-S “X” CRI20. Models added November 2024: Large Booster Sets (PN16): HYDRO MPC-E “X” CRE32, HYDRO MPC-E “X” CRE45, HYDRO MPC-E “X” CRE64, HYDRO MPC-F “X” CR32, HYDRO MPC-F “X” CR45, HYDRO MPC-F “X” CR64, HYDRO MPC-S “X” CR32, HYDRO MPC-S “X” CR45, HYDRO MPC-S “X” CR64. The “X” preceding CR indicates the number of pumps in the booster set, between 2 and 6 pumps. The number following the pump type designation (e.g.: 32, 45 and 64) indicates the flow rate of the pump in m³/h. Full code example: Hydro MPC-E 2 CRE32-2-U2D-A-A-GHJ Where: Hydro MPC = Product name. -E = System type; All pumps with E-motor or CUE, and can also be -F for Fixed-speed pumps, 1 CUE or -S for Fixed-speed pumps. 2 = Number of pumps, this can be any number between 2 and 6. CRE = Pump type, can also be pumps beginning CR, CRI or CRIE. 3, 5, 10, 15, 20, 32, 45, 64 = flow rate of the pump in m³/h. U2 = Voltage, can also be U1, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD or UX. D = Design, can also be A, B, C, E, F, G, H, I or W. -A = Starting method; E (speed control). -A = Material combination; Stainless steel manifold, base frame and standard valves. -HJ = Options;, H - Dry-running protection, J - Redundant sensor.

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#240802003

Range of shower handsets and overhead showers with (plastic or chrome plated plastic bodies). Open Outlet use only Maximum operating temperature 75.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240802003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M) - All other models ½” Captive nut - G50013-2C06, G07011-2C14 and G06011-2C24
Marking:
XIHE on front of body or captive nut
Installation Requirements:
R001 R040
Expiry date:
31/08/2029
Model:
S13034-2C02 S16073-2C03 S99023-2C02 S101015-2C02 S10023-2C02 S10035-2C02 S16023-2C04 S17023-2C02 S04244-2C02 G06011-2C24 G07011-2C14 G50013-2C06 S33011-2C11 S81011-2C02 S10011-2C02 S13041-2C01 S16031-1F02 Model added November 2024 S16061-2C03

Approval Holder:
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Company Name
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'An City, Fujian 362304
Country
China
Phone
+86 0595-86186107

View All Listings by this Company
Manufacturer:
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Company Name
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'An City, Fujian 362304
Country
China
Phone
+86 0595-86186107

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 192 of 326

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.