'SikaTop®-107 Seal AE'. Site applied, grey coloured, two-part coating. Mix parts A and B in a 1.4 weight ratio and apply as per manufacturer's Method Statement 'V1', dated 'Feb 2025'. Cure Coat 1 for 3 hours at 30°C. Cure Coat 2 for 21 days at 30°C. Between January 2025 and December 2025, the coating is for use with water up to 23°C. Between January 2026 and January 2030, the coating is for use with water up to 50°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Evercrete Vetrofluid'. Site applied, colourless, cement waterproofing liquid. Apply two coats as per manufacturer's instructions dated '01 JULY 2024'. Cure Coat 1 for 4hrs 40mins@21ºC and Coat 2 for 36 days@21ºC. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Hostalen PP H2142 12'. Black coloured, injection moulded and compression moulded polypropylene material. For use with water up to 23°C.
SI-55678 (shore hardness 50), SI-65678 (SH 60), SI-75678 (SH 70) & SI-85678 (SH 80) natural ‘O’ rings. SI-52109 (shore hardness 50), SI-62109 (SH 60), SI-72109(SH 70), SI-82109 (SH80) red coloured ‘O’ rings. SI-51501 (shore hardness 50), SI-61501 (SH 60), SI-71501(SH 70) & SI-81501(SH 80) blue coloured ‘O’ rings. Natural (appears white coloured), red or blue coloured, compression moulded silicone rubber ‘O’ rings. Shore hardness between 50 shore A and 80 shore A. Tested in-radii sizes between 0.5mm & 2.5mm. For use with water up to 85°C.
WC douche set including a trigger spray, flexible hose and wall outlet with stop lever. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. Maximum working pressure 10.0 bar. Cold water use only. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. For use with cold water only
Range of bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. Maximum working pressure 10.0 bar. Cold water use only.
Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.
Concealed WC dual flushing cisterns with a BS 1212- 4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a manually operated dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.
Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass body). Incorporating quarter turn ceramic disc headworks, dome type operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator or flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70.0°C
Range of ceramic cartridge headworks with plastic bodies. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of single hole, single outlet (fixed) combination tap assemblies with either stainless steel (models 49xxS604WF & 49xxP704WF only) or brass (all other models) bodies (various finishes). The products incorporate a ceramic cartridge headwork with either single lever, cylindrical or no supplied operating members (see models). The spout outlets incorporate a plastic aerator and model 58xxL904F is supplied with a lever operated pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 80°C.
Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members (model 71 222 xx0 incorporates cross top operating members). The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| 197021 X XXX | VARIOUS | 1/2" BSP | 10.0 | 65 | PPI | Rear of body | No | Non-rising spindle | Aerator & Flow Straightener | Inlet Hoses, Flexible Spout |
| 207121 X XXX | VARIOUS | 1/2" BSP | 10.0 | 65 | PPI | Rear of body | No | 1/2 Turn ceramic disk | Aerator & Flow Straightener | Inlet Hoses, Flexible Spout |
| 207125 X XXX | VARIOUS | 1/2" BSP | 10.0 | 65 | PPI | Rear of body | No | 1/2 Turn ceramic disk | Aerator & Flow Straightener | Inlet Hoses, Flexible Spout |
X XXX Denotes the following: First X: Different handle option = and the second, third & fourth XXX for different finishes: Handles : A (Cross top Dome or Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass body), incorporating ceramic cartridge headwork with single lever operating member. The headwork and the spout are connected by a PEX lined flexible hose. The spout outlets incorporate a plastic aerator, and the products are supplied with metal backnuts. Models supplied with pop-up waste – not tested. Maximum working pressure 10 Bar. Maximum operating temperature 70°C.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| COB BF C | CHROME | 3/4" BSP (M) | 5 | 60 | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Flow Straightener | |
| RP3 COB BF C | CROME | 3/4" BSP (M) | 5 | 60 | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Flow Straightener | |
| COB BF BLK | BLACK | 3/4" BSP (M) | 5 | 60 | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Flow Straightener | |
| 144347 | CHROME | 3/4" BSP (M) | 5 | 60 | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Flow Straightener | |
| 257580 | BLACK | 3/4" BSP (M) | 5 | 60 | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Flow Straightener | |
| RP3 COB BF BLK | BLACK | 3/4" BSP (M) | 5 | 60 | Bristan | Handle or Body | No | 1/4 Turn ceramic disc | Flow Straightener |
Model added February 2026: RP3 COB BF BLK
Wall mounted thermostatic blending valve (brass body, various finishes - see model) incorporating a 2-way ceramic disc headwork with a single lever operating member controlling and diverting the flow between the spout outlet or the shower outlet. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 16.0 bar. Maximum operating temperature 75°C.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| CLS201 | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| CLS211 | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| CLS214 | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| CLS215 | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS210 | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS220 | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS230 | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS22A | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS22B | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS22C | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS22D | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS22E | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS24A | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS24B | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
| BLS24C | Various | 1/2 | 6Bar | 65 | Waterworks | Body | No | 1/4 Turn ceramic disk | Aerator | Interconnecting Hoses |
Finishes available: Chrome, Brass, Burnished Brass, Burnished Nickel, Matte Nickel, Copper, Dark Brass, Vintage Brass, Gold, Matte Gold.
Range of filling loop assemblies, comprising of a stainless-steel braided EPDM lined hose, isolation valve (screwdriver or lever operated) with a DZR brass body and a double check valve incorporating a built-in isolation valve (screwdriver or lever operated) a DZR brass body. The F1400120012211 model has an approved double check valve incorporating a built-in isolation valve with a DZR brass body at each end of the filling loop. All valves are nickel plated. The products are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Page 139 of 160
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
