Directory Search Results

Print List

#250602028

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250602028
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Any flow rates claimed by the manufacturer have not been verified
Size:
½” BSP (F).
Marking:
Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#250702049

Range of shower arms with brass bodies. Models 91xx7034 & 91xx9323 incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 80.0°C (models 86xxxxxx) or 60.0°C (models 91xxxxxx)

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250702049
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet
Size:
½” BSP (M)
Marking:
Fantini on backplate
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
86xx8027 86xx8028 86xx8137 91xx7034 91xx9323 Where xx is replaced with the following to denote finish: 01 = Gold Plus, 02 = Chrome, 13 = Matt Black, 29 = Matt White, 38 = Polished Stainless Steel, 93 = Brushed Stainless Steel, 95 = Nickel PVD, P5 = Matt Gun Metal PVD, P6 = Matt British Gold PVD, P9 = Matt Copper PVD, S1 = Deep Black PVD, Q7 = Pure Brass PVD, Q8 = Raw Metal PVD.

Manufacturer:
Fratelli Fantini Spa
Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Print This Approval


#250504008

Range of (chrome plated) plastic shower handsets with flexible shower hose and stainless-steel braided connection hose. The inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250504008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R009 only applied to the flexible braided inlet hose that connects to the shower hose.
Size:
½” BSP (F) captive nut.
Marking:
Gessi Emporio etched on face plate.
Installation Requirements:
R001 R009 R040
Expiry date:
31/05/2030
Model:
47227, 47127.

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#250402068

Wall mounted finish set incorporating a dome type operating member and a shower hose and handset (chromium plated brass). Outlet to shower incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402068
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
AXOR on hand shower and shower hose ferrule.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
10 651 xx0. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2103044

CAIO ranges of Indirect stainless steel insulated hot water storage cylinders with external expansion and copper pipework and fittings. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:
1890 Unvented Heating Apparatus
WRAS Approval Number:
2103044
Note:
Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:
22mm compression (Inlet Manifold)
Marking:
EHC logo and 'All in One' on front casing, company & technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2026
Model:
CAIO8/15OIND-B (8KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO10/150IND-B (10KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/150IND-B (12KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/150IND-B (15KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO8/150IND-U (8KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO10/150IND-U (10KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO12/15OIND-U (12KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/150IND-U (15KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-150IND (COMPACT AIO 150L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO10/170IND-B (10KW COMPACT AIO/170L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/170IND-B (12KW COMPACT AIO/170L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/170IND-B (15KW COMPACT AIO/170L INDIRECT CYLINDER BASIC PACKAGE) CAIO10/170IND-U (10KW COMPACT AIO/170L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO12/170IND-U (12KW COMPACT AIO/170L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/170-U (15KW COMPACT AIO/170L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-170IND (COMPACT AIO 170L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO10/200IND-B (10KW COMPACT AIO/200L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/200IND-B (12KW COMPACT AIO/200L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/200LIND-B (15KW COMPACT AIO/200L INDIRECT CYLINDER BASIC PACKAGE) CAIO10/200IND-U (10KW COMPACT AIO/2OOL INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO12/200IND-U (12KW COMPACT AIO/200L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/200IND-U (15KW COMPACT AIO/200L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-200IND (COMPACT AIO 200L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO12/250IND-B (12KW COMPACT AIO/250L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/250IND-B (15KW COMPACT AIO/250L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/250IND-U (12KW COMPACT AIO/250L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/250IND-U (15KW COMPACT AIO/250L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-250IND (COMPACT AIO 250L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO12/300IND-B (12KW COMPACT AIO/300L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/300IND-B (15KW COMPACT AIO/300L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/300IND-U (12KW COMPACT AIO/300L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/300IND-U (15KW COMPACT AIO/300L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-300IND (COMPACT AIO 300L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED)

Approval Holder:
THE ELECTRIC HEATING COMPANY LTD
Company Name
THE ELECTRIC HEATING COMPANY LTD
Address
Block 5, Unit 40 Third Road Blantyre Ind Est GLASGOW
Postcode
G72 0UP
Country
United Kingdom
Phone
07986970466
General Email
chris@electric-heatingcompany.co.uk

View All Listings by this Company

Print This Approval


#250713002

Range of wall mounted, concealed, manually operated blending valves with (brass bodies - various finishes), incorporating ceramic cartridge or quarter turn ceramic disc headworks and single lever or dome type operating members. Maximum working pressure 5.0 Bar Maximum operating temperature 70 °C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250713002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Gessi on operating member
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
19710 & 38312 Emporio Shower mixer. 66132 & 54169 Origini Shower mixer

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#250488011

Range of wall mounted, or concealed manually operated blending valves, (brass body, chrome finish), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250488011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
ebb+flo on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
35346
Product Images

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#250603003

Range of wall mounted thermostatic bar shower mixers (chrome plated brass) incorporating quarter turn ceramic disc headwork with single lever type operating members. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate stainless steel strainers and approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a show hose, handset and riser rail assembly. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250603003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
Bristan on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
PM SHXMMCTFF C, AR2 SHXMTFF C, AR2 SHXVOFF C, DUL2 SHXARFF C, DUL2 SHXVOCTFF C, BWY AR2 SHXMTFF C, MCS PM SHXMMCTFF C.

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#250603303

Section:
2010 Shower Valves
Description:
A Shower valve(s) with thermostatic temperature control
Wall mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
190JKChrome15mm Compression10 bar60 °CBristanHandleNoSingle sequentialNot ApplicableNot ApplicableShower Hose, Handset, Riser Rail,
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#250602015

Range of wall mounted self-closing thermostatic shower valves with brass bodies, with a chrome plated dome type operating member. Models are also supplied with a chrome plated shower head with a plastic aerator. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250602015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models:
Marking:
790BOX - Delabie on case cover 790218 – Delabie on button and shower head 790219 – Delabie on button and shower head
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
790BOX – ½” BSP (M) X 3/4" BSP (F) 790218 – ¾” BSP (M) 790219 – ¾” BSP (M)

Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
1-3 Henderson house Hithercroft Road Wallingford Oxfordshire
Postcode
OX10 9DG
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250602032

Wall mounted, thermostatic shower valve (chromium plated brass) for use with copper pipe (manufactured to BS EN 1057). The flow is controlled by a quarter turn ceramic disc headwork with either a dome or lever type operating member. The temperature is controlled by a thermostatic cartridge with either a dome or lever type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250602032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Intatec logo and model on rear of body
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
ST20010CP & ST20010PH Coolflow

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#250602040

Range of concealed thermostatic shower valves, (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlets. Model VQ15 and VQ16 incorporates a manual diverter to the outlets. Model VQ20 incorporates a single shower outlet and model VQ21 incorporates a double shower outlet. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250602040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) or ¾” BSP (F) inlets and outlets.
Marking:
Model number on body
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
VQ15 VQ16 VQ20 VQ21

Manufacturer:
Ultra Finishing Ltd.
Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Ind Est. Lancashire, BL3 2NH
Phone
01282 436934

View All Listings by this Company

Print This Approval


#250602042

Range of wall mounted, thermostatic shower valves, (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating members, the inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection and a stainless-steel strainer. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250602042
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP (M) offset union
Marking:
Villeroy & Boch logo on body
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
TVS000034000XX TVS108015000XX XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel)

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#250602043

Shower set comprising of a wall mounted shower valve, riser rail, shower handset, shower hose and overhead shower outlet. Flow in controlled by a ceramic disc headwork with dome type operating member. Temperature is controlled via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Each inlet of the shower valve incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250602043
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Ideal Standard on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
A7880AA CERATHERM SOLOS SHR SYS TH 1F 300MM CHR A7881AA CT SOLOS SHR SYS TH 1F 330MM LIGHT CHR A7882AA CERATHERM SOLOS SHR SYS TH 3F 300MM CHR A7884AA CT SOLOS SHR SYS TH 3F 300MM STICK CHR A7882GN CERATHERM SOLOS SHR SYS TH 3F 300MM SLST A7882A2 CERATHERM SOLOS SHR SYS TH 3F 300MM BRGO A7882A5 CERATHERM SOLOS SHR SYS TH 3F 300 MGNGR A7882XG CERATHERM SOLOS SHR SYS TH 3F 300MM SBLK A7883AA CT SOLOS SHR SYS TH 3F 330MM LIGHT CHR A7883GN CT SOLOS SHR SYS TH 3F 330MM LIGHT SLST A7883A2 CT SOLOS SHR SYS TH 3F 330MM LIGHT BRGO A7883A5 CT SOLOS SHR SYS TH 3F 330MM LIGHT MGNGR A7883XG CT SOLOS SHR SYS TH 3F 330MM LIGHT SBLK

Approval Holder:
Ideal Standard International NV
Company Name
Ideal Standard International NV
Address
Corporate Village – Gent Building Da Vincilaan 2 B-1935 Zaventem

View All Listings by this Company

Print This Approval


#250604020

Range of wall mounted, concealed, thermostatic shower valves, (brass bodies - various trim set finishes), incorporating quarter turn ceramic disc headwork with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The products incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate that is provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250604020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with a hose, handset or riser rail assembly.
Size:
½” BSP (F).
Marking:
Vitra on face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
A4335836EXP - B3H6 B/I Shower Mixer V-Box, Therm, Mblack. A43358EX - B3H6 B/I Shower Mixer V-Box, Therm, Chrome. A4334836EXP - B2H7 B/I Shower Mixer V-Box, Therm, Mblack. A43348EXP - B2H7 B/I Shower Mixer V-Box,Therm, Chrome.

Approval Holder:
Eczacibasi Building Materials VITRA Faucet Division
Company Name
Eczacibasi Building Materials VITRA Faucet Division
Address
4 Eylül Mah. İsmet İnönü Cad. Düzdağ Yolu 1 No: 4 Bozüyük – BİLECİK
Postcode
11300
Country
Turkey

View All Listings by this Company

Print This Approval


#250608013

Range of wall mounted thermostatic blending valves with brass bodies (various finishes). Incorporating either 2-way ceramic disc diverters (2 on, 1 off) that also controls the flow (model DB3100.a.bbb) or with a ceramic disc headwork that controls the flow only to a single outlet (model DB3200.a.bbb.). Both incorporate lever type operating members. The temperature is controlled independently via a thermostatic cartridge with lever type operating members. Inlets incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250608013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Dolphin Solutions Limited logo on faceplate and flow arrow body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
DB3100.a.bbb, DB3200.a.bbb. ‘a’ identifies the external finish to the metal parts from ‘DB3x00.1.bbb’ to DB3x00.9.bbb’: ‘.1’ denotes brushed/satin polished. ‘.2’ denotes mirror polished. ‘.3’ denotes brushed/satin polished with PVD coating. ‘.4’ denotes mirror polished with PVD coating. ‘.5’ denotes powder coated. ‘.6 - .9’ to denote other material and finish options that may be available in the future. ‘bbb’ indicates the colour of PVD or powder coat that has been applied from ‘DB3x00.a.01’ to DB3x00.a.999’. Can be either two or three digits.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom
General Email
Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Print This Approval


#250608022

Range of thermostatic mixing valves in various finishes, model XX3001YY has one outlet, temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc valve, model XX3002YY has 2 outlets temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc cartridge and model XX3003YY has 3 outlets temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc cartridge. Inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250608022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
These products are not supplied with shower hoses or handsets.
Size:
¾” BSP (F).
Marking:
Coalbrook on shroud body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
XX 3001 YY, XX 3002 YY and XX 3003 YY: XX denotes the trim and can be replaced with BA – Bank, DO – Domo and DC Decca. The numbers will remain constant. YY denotes the finish BN – Brushed Nickel, CP - Chrome, GM – Gunmetal and BB – Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250603004

Range of Shower Valves with thermostatic temperature control. Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum temperature 85°C Miximum pressure 5.0bar.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250603004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression.
Marking:
‘Bristan’ logo on operating member – N2 SHCDIV C, RS2 SHCDIV C, 225786 (Wickes selling code for RS2 SHCDIV C) ‘Heritage’ logo on operating member – SGC04, SHDC03.
Installation Requirements:
R001 R020
Expiry date:
30/06/2030
Model:
N2 SHCDIV C RS2 SHCDIV C 225786 SGC04 SHDC03

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#250688006

Range of wall mounted, thermostatic shower valves (brass body – various finishes), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. The inlets incorporate stainless-steel strainers, plastic flow regulators and approved check valve cartridges (verified by test - suitable for backflow protection against fluid category 2) Product is not supplied with shower hose, handset, overhead shower or riser rail assembly. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250688006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
PPI on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
800204 X XXX X XXX Denotes the following: First X: Different handle option & face plate and the second, third & fourth XXX for different finishes: Handles/Face plate: without suffix indicates no handle / different handle and plate option – A (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#250788003

Wall mounted, thermostatic bar shower mixer (chrome plated brass body) incorporating a quarter turn ceramic disc headwork with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied shower hose, handset and riser rail assembly Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250788003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Aqualisa on valve body, shower handset and ferrule of hose
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2030
Model:
CMD100FSECO.23 Eco contract
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 137 of 140

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.