Range of swivel spout outlets (brass or stainless-steel bodies - various finishes), incorporating plastic aerators.
Non-metallic materials and components comply with BS6920 at 60°C
Basin spout outlet with a brass body (chromium plated brass) incorporating a plastic flow straightener. The product is supplied with a metal back nut. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted spout outlets, (brass bodies – various finishes) incorporating a plastic aerator. The products are supplied with cross top or lever type operating members and a click-type waste.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted spout outlets (chrome plated brass bodies). Incorporating plastic aerators. Models FLTS80 & PTTS82 incorporate NBR ‘O’-rings and washers.
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted spout outlet (brass body – various finishes) incorporating a plastic flow straightener. The inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60.0°C
Non-metallic materials and components comply with BS6920 at 60°C
Rigid filling loop assembly, consisting of a lever operated brass spherical valve and a DZR brass double check valve assembly (verified by test as suitable for backflow protection against Fluid Category 3) that incorporates a lever operated spherical valve. For use with copper manufactured to BS EN 1057. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Non-metallic materials and components comply with BS6920 at 85°C
Filling loop assembly consisting of an elbow shaped copper pipe, isolation valve and double check valve assembly (which incorporates an isolation valve), verified by test (suitable for backflow protection against fluid category 3). Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Non-metallic materials and components comply with BS6920 at 85°C
Range of water filters comprising of plastic filter heads and plastic filter cartridges. Maximum working pressure 5.0 bar. Cold water use only.
‘Unidelta’ brass compression fittings for use with ‘Unidelta UniTerm’ PEX pipe. Maximum working pressure 8.0 bar @ 85°C, 20.0 bar @cold water use.
Range of plastic fittings incorporating an EPDM ‘O’-rings for use with MIXAL pipe. Maximum working pressure 10.0 bar
Non-metallic materials and components comply with BS6920 at 95°C
Range of 'PF Press' TH Profile Brass Press Fittings for use with 'PF Press' Pert-al-Pert Multilayer pipe manufactured to EN ISO 21003 in sizes 16mm, 20mm, 26mm and 32mm. Maximum working pressure 10 bar. Maximum operating temperature: 16mm & 32mm - 95°C. 20mm & 26mm - 23°C between May 2023 to November 2023 and 95°C December 2023 onwards.
Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.
Range of float operated electrical switches with plastic bodies. Cold water use only.
Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.
Range of electromagnetic water meters with rubber lined carbon steel bodies. Maximum working pressure 16.0 Bar. Maximum operating temperature 23.0°C.
Range of water meters with brass (CW724R & CC770S) and plastic (Composite) bodies, incorporating plastic strainers and EPDM ‘O’- rings. Maximum working pressure 16.0 Bar. Temperature: 60.0°C for brass (CW724R & CC770S) models & Cold water use only for composite models.
Wall elbow with a chrome plated brass body and NBR O-rings, the inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall unions with chrome plated brass bodies. Maximum operating temperature 60°C Open outlet use only
Non-metallic materials and components comply with BS6920 at 60°C
Range of level and flow transmitters with plastic bodies. Maximum working pressure 3.0Bar
Non-metallic materials and components comply with BS6920 at 85°C
Flow regulator with a plastic body. 4.0 - 8.5L/min. Claims of flow regulation performance made by manufacturer have note been tested and are not covered as part of this approval.
Non-metallic materials and components comply with BS6920 at 85°C
Concealed wall mounted rough inset with a brass body, incorporating EDPM O-rings. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Range of single (SSR) and twin (STR) ended shower booster pumps with plastic bodies, stainless steel motor shaft, plastic impellors and NBR ‘O’-rings. Supplied with stainless steel strainers. Maximum working pressure 3.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: EV30, EV45, 30VR & 45VR models - 32.0 bar, EV65, EV95, 65VR & 95VR models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.
Single stage centrifugal pump, with plastic impellers. The pump is equipped with ceramic bearings; the body and shaft are made of stainless steel. The product is supplied with loose fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Range of shower handsets and an overhead shower outlet with plastic bodies (chrome plated, chrome plated/white or chrome plated/black coloured finish - see model). The inlet of the 2.1981.018 model incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Non-metallic materials and components comply with BS6920 at 55°C
Shower handset chrome plated plastic bodies and built in combined flow restrictors/approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models added March 2023 are available in various finishes, see model.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets with a chromium plated plastic body.
Non-metallic materials and components comply with BS6920 at 70°C
Range of shower outlet elbows (brass bodies - various finishes) with a shower handset holder. The product incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure - 10 Bar.
Non-metallic materials and components comply with BS6920 at 70°C
Range of overhead shower outlets (brass bodies – various finishes). The inlets incorporate a plastic flow regulator. Model 26 221 xxx and 26 465 xx0 incorporates a stainless-steel strainer, all other models incorporate a plastic strainer. Maximum operating temperature 60.0°C. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets with plastic bodies (various finishes). The inlets incorporate flow restrictors, model 24320xxx has a plastic strainer at the inlet, model 24321xxx has a stainless steel strainer at the inlet. Maximum operating temperature 60°C.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets with plastic bodies (various finishes) incorporating a flow regulator and stainless-steel strainer in the inlet. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets with plastic bodies. The inlet incorporates a plastic flow regulator, and the outlet incorporates a plastic aerator.
Non-metallic materials and components comply with BS6920 at 60°C
Overhead shower outlets, (brass bodies - various finishes). The inlet is fitted with a flow regulator. Maximum operating temperature 42°C. Open outlet use only.
Range of wall mounted outlet brackets, (brass bodies - various finishes).Open outlet use only.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted overhead showers incorporating stainless steel strainers and flow regulator in the inlet. Open outlet use only.
Range of overhead shower outlets (chrome plated brass bodies) incorporating NBR ‘O’ rings.
Non-metallic materials and components comply with BS6920 at 65°C
Overhead shower outlet (brass body – various finishes) incorporating a plastic flow regulator.
Non-metallic materials and components comply with BS6920 at 65°C
Range of overhead shower outlets (brass bodies – various finishes), the inlets incorporate a stainless-steel filter washer and an approved check valve cartridge, however, the complete assembly has not been tested to demonstrate that it provides back flow protection.
Non-metallic materials and components comply with BS6920 at 65°C
Range of shower outlets (brass or stainless-steel bodies – various finishes) incorporating EPDM O-rings. Maximum operating temperature 60.0°C
Non-metallic materials and components comply with BS6920 at 60°C
Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C
Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, two hole (models BT1714WSA & BT1714BH-WSA) or single hole (model BT3100-232SWSA) laboratory taps incorporating brass bodies and rising spindle headwork with either dome type or single lever operating members. Models BT1714WSA & BT1714BH-WSA have a swivel spout with a hose union connection. Model BT3100-232SWSA has two fixed hose union connections attached to the main body. The products are supplied with a metal backnut. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of deck mounted, two hole (models BT1614-55WSA & BT1624WSA) or single hole (models BT414-55 & BT424), single outlet (swivel) laboratory taps incorporating brass bodies and rising spindle headworks with either dome type or single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a metal backnut. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of deck mounted, single hole, single outlet (fixed or swivel) laboratory taps incorporating brass bodies and rising spindle headwork with either dome type or single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a metal backnut. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, two hole, single outlet (swivel) laboratory taps incorporating brass bodies and rising spindle headwork with either dome type or single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a metal backnut. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Pillar taps with chromium plated - brass bodies incorporating a quarter turn ceramic disc headwork, with single lever type operating members. The spout outlet incorporates a flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 45°C
Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with cross top operating members. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with cross top operating members. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of dual layer reinforced hose assemblies, with elbow and straight end fittings, For use with free standing appliances. Available with a grey, blue, red or white PVC outer layer and black PVC inner layer, and EPDM or NBR gaskets. End connections incorporate plastic filters. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of stainless steel braided, EPDM lined flexible hose assemblies with various brass end connections. The hoses are supplied with EPDM O-rings or washers. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Page 116 of 225
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
