Range of single hole, single outlet (fixed) combination tap assemblies ( brass bodies - various finishes), incorporating either a ceramic cartridge or ceramic disc (see models) headworks with either a single lever or cross top (see models) operating member. The spout outlet incorporates either a plastic aerator, a plastic flow straightener or an open outlet type spout (see models). Some models are supplied with a click type waste and some are supplied with a lever type pop-up waste (see models). Maximum working pressure 5.0 Bar . Maximum operating temperature 65.0°C or 85.0°C (see models)

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310417

Size:

Stainless Steel braided EPDM lined flexible hoses incorporating 1/2” BSP captive nut end connections. Stainless steel braided EPDM or (PEX) lined flexible hose assemblies incorporating 1/2" captive nut end connections for models ( 174538, 179638, 179608F, 179608F GF, 179108 & 172908 )

Marking:

ebb+flo on body, except for 285451 Caldew - TP on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2028

Model:

5.0 Bar, 65°C Models: 30794 Pentle Cloakroom Basin Mixer 33830 Kilve Basin Mixer 295451 Caldew Mini Basin Mixer. AA972 Pentle Cloakroom Basin Mixer Matt Black 5.0 Bar, 85°C Models: AA969 Cobo Cloakroom Basin Mixer 95737 Cobo Basin Mixer

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies -various finishes, see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator, (except for the 3259-XX models). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

CARLOTA on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

3319-XX, 3170-XX, 3178-XX, 3303-XX, 3259-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck mounted Capable of Achieving AUK3 Tap Gap IRN R160 only applies to model 824B

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010 R160

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

Taizhou Xinya Sanitary Ware Co., Ltd

Range of single hole, single outlet, swivel, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Model BLS4ZZX is supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP female adapters.

Marking:

WATERWORKS on escutcheon.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

BKM4ZZX BLS4ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of deck mounted, two hole, double outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc headworks (DLV305B, DLT305B) or non-rising spindle headworks (CR305 BRIDGE, CR305/501 BRIDGE) and single lever or cross top operating members. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250904006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DEVA, DTC 59 on underside of body.

Installation Requirements:

R001 R006

Expiry date:

30/09/2030

Model:

DLT305B Lever Action Bridge Sink Mixer DLV305B Lever Action Bridge Sink Mixer With 6" Levers CR305 BRIDGE Coronation Bridge Sink Mixer CR305/501 BRIDGE Coronation Bridge Sink Mixer – Gold

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Wall mounted, two hole, double outlet (swivel) combination tap assembly incorporating quarter turn ceramic disc headworks with single lever type operating members. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250904007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DEVA, DTC 59 etched on underside of body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

DLV305WM Lever Action Wall Mounted Bridge Sink Mixer With 6" Levers

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The 2259-XX model incorporates an open outlet spout, all other models incorporate a plastic aerator. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

2319-XX, 2170-XX, 2303-XX, 2259-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck or Wall Mounted Capable of achieving AUK3 Tap gap when deck mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Notes & Further Information

1)No Suffix-Chrome 2)-**Represents the following different surface treatments: 1.H-Black 2.DYB - Matte white 3.BZ - Perl white painted 4.HGTS - Red bronze 5.HTL = Yellow bronze brushed 6.Q = Bronze 7.QTSL = Bronze brushed bright 8.QTS = Bronze brushed matte 9.STS = Acid copper brushed 10.SDMGJ = Water plated rose gold 11.N = Nickel brushed bright light 12.NP = Nickel brushed 13.TJ = Titanium gold 14.TJLS = Titanium gold brushed 15.G = Gold 16.GJS = Gold brushed 17.GJSY = Zirconium gold wire drawing matte 18.PGJFY = Zirconium gold wire drawing matte bright light 19.PLSJ = Brushed gold 20.LSJY = Brushed gold matte 21.MGJ = Rose gold 22.MGJL = Rose gold brushed 23.DMGJ = Light rose gold brushed 24.HTS = Red bronze brushed 25.QHP = Grey 26.LSQH = Grey brushed 27.LHMGJ = Brushed yellow rose gold

Product Images

Approval Holder:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

XUDOU VILLAGE, QINGGANG, YUHUAN ZHEJIANG

Country

china

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator, (except for the 1259-XX models). The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250912022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This approval does not include a shower hose and handset.

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R006 R020

Expiry date:

30/09/2030

Model:

1319-XX, 1170-XX, 1303-XX, 1259-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

30/09/2030

Product Images

Approval Holder:

Ningbo Syton Testing & Technology Service Co., Ltd.

Company Name

Ningbo Syton Testing & Technology Service Co., Ltd.

Address

F5 No. 5 Building Zhongchuanghui No. 128 Jingyuan Road Ningbo

Postcode

315040

Country

China

Phone

0086‐574‐87042953

General Email

justine.yu@syton.com.cn

View All Listings by this Company

Manufacturers:

Guangdong Weixiang Sanitary Ware Co., Ltd

Section:

0550 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a swivel spout.

Deck mounted. Capable of achieving an AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Various finish： (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Range of three-hole, single outlet, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up or lever type waste – not verified by test. Maximum working pressure. 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on escutcheon or end of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS2ZZX BLS6ZZX CLS2ZZX HLS2ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear or on edge of spout outlet.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

CLS1ZZX HLS1ZZX BLS5XXZ Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear of body and on adhesive label on rear of body or WATERWORKS on edge of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS1ZZX 8 Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless-steel braided EPDM lined flexible connection hoses Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Product Images

Approval Holder:

In Compliance GmbH

Company Name

In Compliance GmbH

Address

Kathe-Kollwitz-Ring 5a Unna

Postcode

59423

Country

Germany

General Email

jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Manufacturers:

Cifial S.A

‘LSMRI’ range of copper-nickel press fittings (‘M’ type crimp profile) for use with copper-nickel ‘LSMRI’ pipe. Above ground use only. Maximum working pressures: Press fittings: 16.0 bar, LSMRI-PN6 Series flange: 6.0 bar, LSMRI-PN10/16 Series flange: 10/16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 108mm.

Marking:

Fittings: LSMRI, product name, size, CuNi10Fe1.6Mn, PN16, PN6 or PN10/16 on body. Pipe: LSMRI, Size, CuNi10Fe1.6Mn.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

LSMRI-Pipe-15, LSMRI-Pipe-22, LSMRI-Pipe-28, LSMRI-Pipe-35, LSMRI-Pipe-42, LSMRI-Pipe-54, LSMRI-Pipe-76.1, LSMRI-Pipe-88.9, LSMRI-Pipe-108, LSMRI-90°A Elbow-15, LSMRI-90°A Elbow-22, LSMRI-90°A Elbow-28, LSMRI-90°A Elbow-35, LSMRI-90°A Elbow-42, LSMRI-90°A Elbow-54, LSMRI-90°A Elbow-76.1, LSMRI-90°A Elbow-88.9, LSMRI-90°A Elbow-108, LSMRI-90°B Elbow-15, LSMRI-90°B Elbow-22, LSMRI-90°B Elbow-28, LSMRI-90°B Elbow-35, LSMRI-90°B Elbow-42, LSMRI-90°B Elbow-54, LSMRI-90°B Elbow-76.1, LSMRI-90°B Elbow-88.9, LSMRI-90°B Elbow-108, LSMRI-60°A Elbow-15, LSMRI-60°A Elbow-22, LSMRI-60°A Elbow-28, LSMRI-60°A Elbow-35, LSMRI-60°A Elbow-42, LSMRI-60°A Elbow-54, LSMRI-60°A Elbow-76.1, LSMRI-60°A Elbow-88.9, LSMRI-60°A Elbow-108, LSMRI-60°B Elbow-15, LSMRI-60°B Elbow-22, LSMRI-60°B Elbow-28, LSMRI-60°B Elbow-35, LSMRI-60°B Elbow-42, LSMRI-60°B Elbow-54, LSMRI-60°B Elbow-76.1, LSMRI-60°B Elbow-88.9, LSMRI-60°B Elbow-108, LSMRI-45°A Elbow-15, LSMRI-45°A Elbow-22, LSMRI-45°A Elbow-28, LSMRI-45°A Elbow-35, LSMRI-45°A Elbow-42, LSMRI-45°A Elbow-54, LSMRI-45°A Elbow-76.1, LSMRI-45°A Elbow-88.9, LSMRI-45°A Elbow-108, LSMRI-45°B Elbow-15, LSMRI-45°B Elbow-22, LSMRI-45°B Elbow-28, LSMRI-45°B Elbow-35, LSMRI-45°B Elbow-42, LSMRI-45°B Elbow-54, LSMRI-45°B Elbow-76.1, LSMRI-45°B Elbow-88.9, LSMRI-45°B Elbow-108, LSMRI-30°A Elbow-15, LSMRI-30°A Elbow-22, LSMRI-30°A Elbow-28, LSMRI-30°A Elbow-35, LSMRI-30°A Elbow-42, LSMRI-30°A Elbow-54, LSMRI-30°A Elbow-76.1, LSMRI-30°A Elbow-88.9, LSMRI-30°A Elbow-108, LSMRI-30°B Elbow-15, LSMRI-30°B Elbow-22, LSMRI-30°B Elbow-28, LSMRI-30°B Elbow-35, LSMRI-30°B Elbow-42, LSMRI-30°B Elbow-54, LSMRI-30°B Elbow-76.1, LSMRI-30°B Elbow-88.9, LSMRI-30°B Elbow-108, LSMRI-15°A Elbow-15, LSMRI-15°A Elbow-22, LSMRI-15°A Elbow-28, LSMRI-15°A Elbow-35, LSMRI-15°A Elbow-42, LSMRI-15°A Elbow-54, LSMRI-15°A Elbow-76.1, LSMRI-15°A Elbow-88.9, LSMRI-15°A Elbow-108, LSMRI-15°B Elbow-15, LSMRI-15°B Elbow-22, LSMRI-15°B Elbow-28, LSMRI-15°B Elbow-35, LSMRI-15°B Elbow-42, LSMRI-15°B Elbow-54, LSMRI-15°B Elbow-76.1, LSMRI-15°B Elbow-88.9, LSMRI-15°B Elbow-108, LSMRI-Equal Tee-15, LSMRI-Equal Tee-18, LSMRI-Equal Tee-22, LSMRI-Equal Tee-28, LSMRI-Equal Tee-35, LSMRI-Equal Tee-42, LSMRI-Equal Tee-54, LSMRI-Equal Tee-76.1, LSMRI-Equal Tee-88.9, LSMRI-Equal Tee-108, LSMRI-Reduce Tee-22X15, LSMRI-Reduce Tee-28X15, LSMRI-Reduce Tee-28X22, LSMRI-Reduce Tee-35X15, LSMRI-Reduce Tee-35X22, LSMRI-Reduce Tee-35X28, LSMRI-Reduce Tee-42X22, LSMRI-Reduce Tee-42X28, LSMRI-Reduce Tee-42X35, LSMRI-Reduce Tee-54X22, LSMRI-Reduce Tee-54X28, LSMRI-Reduce Tee-54X35, LSMRI-Reduce Tee-54X42, LSMRI-Reduce Tee-76.1X22, LSMRI-Reduce Tee-76.1X28, LSMRI-Reduce Tee-76.1X35, LSMRI-Reduce Tee-76.1X42, LSMRI-Reduce Tee-76.1X54, LSMRI-Reduce Tee-88.9X22, LSMRI-Reduce Tee-88.9X28, LSMRI-Reduce Tee-88.9X35, LSMRI-Reduce Tee-88.9X42, LSMRI-Reduce Tee-88.9X54, LSMRI-Reduce Tee-88.9X76.1, LSMRI-Reduce Tee-108X22, LSMRI-Reduce Tee-108X28, LSMRI-Reduce Tee-108X35, LSMRI-Reduce Tee-108X42, LSMRI-Reduce Tee-108X54, LSMRI-Reduce Tee-108X76.1, LSMRI-Reduce Tee-108X88.9, LSMRI-Reducer-22X15, LSMRI-Reducer-28X15, LSMRI-Reducer-28X18, LSMRI-Reducer-28X22, LSMRI-Reducer-35X22, LSMRI-Reducer-35X28, LSMRI-Reducer-42X28, LSMRI-Reducer-42X35, LSMRI-Reducer-54X28, LSMRI-Reducer-54X35, LSMRI-Reducer-54X42, LSMRI-Reducer-76.1X42, LSMRI-Reducer-76.1X54, LSMRI-Reducer-88.9X22, LSMRI-Reducer-88.9X54, LSMRI-Reducer-88.9X76.1, LSMRI-Reducer-108X22, LSMRI-Reducer-108X54, LSMRI-Reducer-108X76.1, LSMRI-Reducer-108X88.9, LSMRI-Sleeve-15, LSMRI-Sleeve-22, LSMRI-Sleeve-28, LSMRI-Sleeve-35, LSMRI-Sleeve-42, LSMRI-Sleeve-54, LSMRI-Sleeve-76.1, LSMRI-Sleeve-88.9, LSMRI-Sleeve-108, LSMRI-Slip Sleeve-15, LSMRI-Slip Sleeve-22, LSMRI-Slip Sleeve-28, LSMRI-Slip Sleeve-35, LSMRI-Slip Sleeve-42, LSMRI-Slip Sleeve-54, LSMRI-Slip Sleeve-76.1, LSMRI-Slip Sleeve-88.9, LSMRI-Slip Sleeve-108, LSMRI-Sleeve with 1 thread female end-15XR1/2", LSMRI-Sleeve with 1 thread female end-22XR3/4", LSMRI-Sleeve with 1 thread female end-28XR1", LSMRI-Sleeve with 1 thread female end-35XR1 1/4", LSMRI-Sleeve with 1 thread female end-42XR1 1/2", LSMRI-Sleeve with 1 thread female end-54XR2", LSMRI-Sleeve with 1 thread female end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread female end-88.9XR3", LSMRI-Sleeve with 1 thread female end-108XR4", LSMRI-Sleeve with 1 thread male end-15XR1/2", LSMRI-Sleeve with 1 thread male end-22XR3/4", LSMRI-Sleeve with 1 thread male end-28XR1", LSMRI-Sleeve with 1 thread male end-35XR1 1/4", LSMRI-Sleeve with 1 thread male end-42XR1 1/2", LSMRI-Sleeve with 1 thread male end-54XR2", LSMRI-Sleeve with 1 thread male end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread male end-88.9XR3", LSMRI-Sleeve with 1 thread male end-108XR4", LSMRI-PN6 FLANGED SLEEVE-15, LSMRI-PN6 FLANGED SLEEVE-22, LSMRI-PN6 FLANGED SLEEVE-28, LSMRI-PN6 FLANGED SLEEVE-35, LSMRI-PN6 FLANGED SLEEVE-42, LSMRI-PN6 FLANGED SLEEVE-54, LSMRI-PN6 FLANGED SLEEVE-76.1, LSMRI-PN6 FLANGED SLEEVE-88.9, LSMRI-PN6 FLANGED SLEEVE-108, LSMRI-PN10/16 FLANGED SLEEVE-15, LSMRI-PN10/16 FLANGED SLEEVE-28, LSMRI-PN10/16 FLANGED SLEEVE-35, LSMRI-PN10/16 FLANGED SLEEVE-42, LSMRI-PN10/16 FLANGED SLEEVE-54, LSMRI-PN10/16 FLANGED SLEEVE-76.1, LSMRI-PN10/16 FLANGED SLEEVE-88.9, LSMRI-PN10/16 FLANGED SLEEVE-108, LSMRI-PN6 Inner pieces for flanges-15, LSMRI-PN6 Inner pieces for flanges-22, LSMRI-PN6 Inner pieces for flanges-28, LSMRI-PN6 Inner pieces for flanges-35, LSMRI-PN6 Inner pieces for flanges-42, LSMRI-PN6 Inner pieces for flanges-54, LSMRI-PN6 Inner pieces for flanges-76.1, LSMRI-PN6 Inner pieces for flanges-88.9, LSMRI-PN6 Inner pieces for flanges-108, LSMRI-PN10/16 Inner pieces for flanges-15, LSMRI-PN10/16 Inner pieces for flanges-22, LSMRI-PN10/16 Inner pieces for flanges-28, LSMRI-PN10/16 Inner pieces for flanges-35, LSMRI-PN10/16 Inner pieces for flanges-42, LSMRI-PN10/16 Inner pieces for flanges-54, LSMRI-PN10/16 Inner pieces for flanges-76.1, LSMRI-PN10/16 Inner pieces for flanges-88.9, LSMRI-PN10/16 Inner pieces for flanges-108, LSMRI-Penetration With Sleeve-15, LSMRI-Penetration With Sleeve-22, LSMRI-Penetration With Sleeve-28, LSMRI-Penetration With Sleeve-35, LSMRI-Penetration With Sleeve-42, LSMRI-Penetration With Sleeve-54, LSMRI-Penetration With Sleeve-76.1, LSMRI-Penetration With Sleeve-88.9, LSMRI-Penetration With Sleeve-108, LSMRI-Tee with 1 female thread end-15XR1/2", LSMRI-Tee with 1 female thread end-22XR1/2", LSMRI-Tee with 1 female thread end-28XR1/2", LSMRI-Tee with 1 female thread end-35XR1/2", LSMRI-Tee with 1 female thread end-42XR1/2", LSMRI-Tee with 1 female thread end-54XR1/2", LSMRI-Tee with 1 female thread end-22XR3/4", LSMRI-Tee with 1 female thread end-28XR3/4", LSMRI-Tee with 1 female thread end-35XR3/4", LSMRI-Tee with 1 female thread end-42XR3/4", LSMRI-Tee with 1 female thread end-54XR3/4", LSMRI-Tee with 1 female thread end-76.1XR3/4", LSMRI-Tee with 1 female thread end-88.9XR3/4", LSMRI-Tee with 1 female thread end-108XR3/4", LSMRI-Tee with 1 female thread end-28XR1", LSMRI-Tee with 1 female thread end-35XR1 1/4", LSMRI-Tee with 1 female thread end-42XR1 1/2", LSMRI-Tee with 1 female thread end-54XR2", LSMRI-Tee with 1 female thread end-108XR2", LSMRI-Female thread end connector with union-15XR1/2", LSMRI-Female thread end connector with union-22XR3/4", LSMRI-Female thread end connector with union-28XR1", LSMRI-Female thread end connector with union-35XR1 1/4", LSMRI-Female thread end connector with union-42XR1 1/2", LSMRI-Female thread end connector with union-54XR2", LSMRI-Male thread end connector with union-15XR1/2", LSMRI-Male thread end connector with union-22XR3/4", LSMRI-Male thread end connector with union-28XR1", LSMRI-Male thread end connector with union-35XR1 1/4", LSMRI-Male thread end connector with union-42XR1 1/2", LSMRI-Male thread end connector with union-54XR2".

Product Images

Approval Holder:

Luoyang Ship Material Research Institute

Company Name

Luoyang Ship Material Research Institute

Address

No.169,South Binhe Road, Luolong District, Luoyang City, Henan Province

Country

China

View All Listings by this Company

Range of compression fittings with brass, nickel plated brass bodies for use with copper pipe (manufactured to EN 1057). For above ground use only. Max working pressure 16.0 bar. Max operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm. ¼” - 1¼” BSP (M) or (F). Added June 2025: Additional 8 - 35mm sizes (see model). 42mm - 54mm. 1½” - 2” BSP (M) or (F).

Marking:

MT(Brand name) , Size, WRAS and EN 1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Equal Straight: 6601012 - 12×12 6601015 - 15×15 6601018 - 18×18 6601022 - 22×22 6601028 - 28×28 6601035 - 35×35 6601042 - 42x42 6601054 - 54x54 6701008 8×8 6701010 - 10×10 6701012 - 12×12 6701014 - 14×14 6701015 - 15×15 6701016 - 16×16 6701018 - 18×18 6701022 - 22×22 6701028 - 28×28 6701035 - 35×35 6701042 - 42x42 6701054 - 54x54 Reducing Straight: 660101815 - 18×15 660102215 - 22×15 660102218 - 22×18 660102822 - 28×22 670101008 - 10×8 670101210 - 12×10 670101508 - 15×8 670101510- 15×10 670101512 - 15×12 670101815 - 18×15 670102215 - 22×15 670102822 - 28×22 Female Straight 660201215 - 12×1/2" F 660201510 - 15×3/8" F 660201515 - 15×1/2" F 660201520 - 15×3/4" F 660201525 - 15×1" F 660201815 - 18×1/2" F 660201820 - 18×3/4" F 660202215 - 22×1/2" F 660202220 - 22×3/4" F 660202215 - 22×1" F 660202820 - 28×3/4" F 660202825 - 28×1" F 670200810 - 8×3/8" F 670201010 - 10×3/8" F 670201015 - 10×1/2" F 670201210 - 12×3/8" F 670201215 - 12×1/2" F 670201415 - 14×1/2" F 670201510 - 15×3/8" F 670201515 - 15×1/2" F 670201520 - 15×3/4" F 670201525 - 15×1" F 670201615 - 16×1/2"F 670201620 - 16×3/4" F 670201815 - 18×1/2" F 670201820 - 18×3/4" F 670202215 - 22×1/2" F 670202220 - 22×3/4" F 670202225 - 22×1" F 670202820 - 28×3/4" F 670202825 - 28×1" F 670203532 - 35×1 1/4"F 670204240 - 42×1 1/2" F 670205450 - 54×2" F Male Straight: 670301510 - 15×3/8"M 670301515 - 15×1/2"M 670301520- 15×3/4"M 670301815 - 18×1/2"M 670301820 - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302225- 22×1"M 660302820 - 28×3/4"M 660302825 - 28×1"M 670300806F - 8×1/8"M 670301210F - 12×3/8"M 670301215F - 12×1/2"M 670301410F - 14×3/8"M 670301415F - 14×1/2"M 670301515 - 15×1/2"M 670301520F - 15×3/4"M 670301615F - 16×1/2"M 670301815F - 18×1/2"M 670301820F - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302820F - 28×3/4"M 670302825 - 28×1"M 670303532F - 35×1 1/4"M 670304240F - 42×1 1/2"M Equal Elbow: 6604015 - 15×15 6604018 - 18×18 6604022 - 22×22 6604028 - 28×28 6604035 - 35×35 6604042 - 42×1 1/2"M 6604054 - 54 x 54 6704008 - 8×8 6704010 - 10×10 6704012 - 12×12 6704014 - 14×14 6704015 - 15×15 6704016 - 16×16 6704018 - 18×18 6704022 - 22×22 6704028 - 28×28 6704035 - 35×35 6704042 - 42x42 6704054 - 54x54 Female Elbow: 670501215 - 12×1/2"F 670501515 - 15×1/2"F 670501520 - 15×3/4"F 670501815 - 18×1/2"F 670501820 - 18×3/4"F 670502215 - 22×1/2"F 670502220 - 22×3/4"F 670582225 - 22×1"F 670502825 - 28×1"F 660501515 - 15×1/2"F 660501520 - 15×3/4"F 660501815 - 18×1/2"F 660501820 - 18×3/4"F 660502215- 22×1/2"F 660502220 - 22×3/4"F 660502225 - 22×1"F 660502825 - 28×1"F Male Elbow: 660601515 - 15×1/2"M 660601520 - 15×3/4"M 660601815 - 18×1/2"M 660601820 - 18×3/4"M 660602215 - 22×1/2"M 660602220 - 22×3/4"M 660602225 - 22×1"M 660602825 - 28×1"M 670601215 - 12×1/2"M 670601415- 14×1/2"M 670601515 - 15×1/2"M 670601520 - 15×3/4"M 670601615 - 16×1/2"M 670601815 - 18×1/2"M 670601820 - 18×3/4"M 670602215 - 22×1/2"M 670602220 - 22×3/4"M 670602225 - 22×1"M 670602825 - 28×1"M Equal Tee: 6608015 - 15×15×15 6608018 - 18×18×18 6608022 - 22×22×22 6608028 - 28×28×28 6608035- 35×35×35 6608042 - 42×42×42 6608054 - 54×54×54 6708010 - 10×10×10 6708012 - 12×12×12 6708014 - 14×14×14 6708015 - 15×15×15 6708016 - 16×16×16 6708018 - 18×18×18 6708022 - 22×22×22 6708028 - 28×28×28 6708035 - 35×35×35 Reducing Tee: 66090152215 - 15×15×22 66090181518 - 18×18×15 66090181815 - 18×15×18 66090221515 - 22×15×15 66090222215- 22×15×22 66090221522 - 22×22×15 66090221822 - 22×22×18 66090282815 - 28×15×28 66090282222 - 28×22×22 66090282822 - 28×22×28 67090152215 -15×15×22 67090181518 - 18×18×15 67090181815 - 18×15×18 67090221515 - 22×15×15 67090222215 - 22×15×22 67090221522 - 22×22×15 67090282815 - 28×15×28 67090282222 - 28×22×22 67090282822 - 28×22×28 Female Tee: 66100151515 - 15×1/2“F 66100181518 - 18×1/2“F 66100182018 - 18×3/4“F 66100221522 - 22×1/2”F 66100222022 - 22×3/4”F 66100282028 - 28×3/4”F 66100282528- 28×1”F 67100151515- 15×1/2“F 67100181518 - 18×1/2“F 67100182018 - 18×3/4“F 67100221522 - 22×1/2”F 67100222022 - 22×3/4”F Wall Plate Elbow: 661101515 - 15×1/2"F 661101815 - 18×1/2"F 661101820 - 18×3/4"F 661102215 - 22×1/2"F 661102220 - 22×3/4"F 671101515 - 15×1/2"F 671102215 - 22×1/2"F 671102220 - 22×3/4"F Stop End: 6607015 - 15 6607018 - 18 6607022 - 22 670708 - 8 6707010 - 10 6707012 - 12 6707015 - 15 6707018 - 18 6707022 - 22 6707028 - 28 Bent Tap Connector: 671301515 - 15×1/2"F 671302220 - 22×3/4"F Crossover Bridge: 6612015 - 15×15 6612018 - 18×18 6612022 - 22×22 6712015 - 15×15 6712022 - 22×22 Where for all models: No suffix = brass body, NP suffix = nickel plated brass,

Product Images

Approval Holder:

Business Key, S.L.

Company Name

Business Key, S.L.

Address

Poligono Industrial Camps d’En Ricart Carrer Comerç, 10 naves 4-9 08780 Pallejà (Barcelona)

Country

Spain

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

South Coast Sales logo on body. EN 1254 and Size on compression Nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Product Images

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

“D-“ and “E-“ range of 304 and 316L stainless steel press fittings, in either ‘M’ press profile (D- prefix models) or ‘V’ press profile (E- prefix models) for use with stainless steel pipe (316L & 304 manufactured to EN10312). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Company logo “WEGS”, size, material SUS304 or SUS316L on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D-DN10 - 90° Equal Elbow: 15mm, D-DN15 - 90° Equal Elbow: 18mm, D-DN20 - 90° Equal Elbow: 22mm, D-DN25 - 90° Equal Elbow: 28mm, D-DN32 - 90° Equal Elbow: 35mm, D-DN40 - 90° Equal Elbow: 42mm, D-DN50 - 90° Equal Elbow: 54mm, D-DN10 - 90° B-type equal elbow: 15mm, D-DN15 - 91° B-type equal elbow: 18mm, D-DN20 - 92° B-type equal elbow: 22mm, D-DN25 - 93° B-type equal elbow: 28mm, D-DN32 - 94° B-type equal elbow: 35mm, D-DN40 - 95° B-type equal elbow: 42mm, D-DN50 - 96° B-type equal elbow: 54mm, D-DN15×10 - 90° Reducing Elbow: 15×18mm, D-DN20×15 - 91° Reducing Elbow: 22×18mm, D-DN25×15 - 92° Reducing Elbow: 28×18mm, D-DN25×20 - 93° Reducing Elbow: 28×22mm, D-DN10×½ - 90° Male Elbow: 15mm×½, D-DN10×¾ - 90° Male Elbow: 15mm×¾, D-DN15×½ - 90° Male Elbow: 18mm×½, D-DN15×¾ - 90° Male Elbow: 18mm×¾, D-DN20×¾ - 90° Male Elbow: 22mm×¾, D-DN25×1 - 90° Male Elbow: 28 mm×1, D-DN32×1¼ - 90° Male Elbow: 35mm×1¼, D-DN40×1½ - 90° Male Elbow: 42mm×1½, D-DN50×2 - 90° Male Elbow: 54mm×2, D-DN10×½ - 90° female elbow: 15mm×½, D-DN10×¾ - 90° female elbow: 15mm×¾, D-DN15×½ - 90° female elbow: 18mm×½, D-DN15×¾ - 90° female elbow: 18mm×¾, D-DN20×¾ - 90° female elbow: 22mm×¾, D-DN25×1 - 90° female elbow: 28 mm×1, D-DN32×1¼ - 90° female elbow: 35mm×1¼, D-DN40×1½ - 90° female elbow: 42mm×1½, D-DN50×2 - 90° female elbow: 54 mm×2, D-DN10 - 45° Equal Elbow: 15mm, D-DN15 - 45° Equal Elbow: 18mm, D-DN20 - 45° Equal Elbow: 22mm, D-DN25 - 45° Equal Elbow: 28mm, D-DN32 - 45° Equal Elbow: 35mm, D-DN40 - 45° Equal Elbow: 42mm, D-DN50 - 45° Equal Elbow: 54mm, D-DN10 - 45° B-type equal elbow: 15mm, D-DN15 - 45° B-type equal elbow: 18mm, D-DN20 - 45° B-type equal elbow: 22mm, D-DN25 - 45° B-type equal elbow: 28mm, D-DN32 - 45° B-type equal elbow: 35mm, D-DN40 - 45° B-type equal elbow: 42mm, D-DN50 - 45° B-type equal elbow: 54mm, D-DN10 - Equal tee: 15mm, D-DN15 - Equal tee: 18mm, D-DN20 - Equal tee: 22mm, D-DN25 - Equal tee: 28mm, D-DN32 - Equal tee: 35mm, D-DN40 - Equal tee: 42mm, D-DN50 - Equal tee: 54mm, D-DN15×10 - Reducing Tee: 18×15mm, D-DN20×10 - Reducing Tee: 22×15mm, D-DN20×15 - Reducing Tee: 22×18mm, D-DN25×10 - Reducing Tee: 28×15mm, D-DN25×15 - Reducing Tee: 28×18mm, D-DN25×20 - Reducing Tee: 28×22mm, D-DN32×10 - Reducing Tee: 35×15mm, D-DN32×15 - Reducing Tee: 35×18mm, D-DN32×20 - Reducing Tee: 35×22mm, D-DN32×25 - Reducing Tee: 35×28mm, D-DN40×15 - Reducing Tee: 42×18mm, D-DN40×20 - Reducing Tee: 42×22mm, D-DN40×25 - Reducing Tee: 42×28mm, D-DN40×32 - Reducing Tee: 42×35mm, D-DN50×20 - Reducing Tee: 54×22mm, D-DN50×25 - Reducing Tee: 54×28mm, D-DN50×32 - Reducing Tee: 54×35mm, D-DN50×40 - Reducing Tee: 54×42mm, D-DN10×½ - Short elbow with female: 15mm×½, D-DN10×¾ - Short elbow with female: 15mm×¾, D-DN15×½ - Short elbow with female: 18mm×½, D-DN15×¾ - Short elbow with female: 18mm×¾, D-DN20×¾ - Short elbow with female: 22mm×¾, D-DN25×½ - Short elbow with female: 28mm×½, D-DN25×¾ - Short elbow with female: 28mm×¾, D-DN25×1 - Short elbow with female: 28mm×1, D-DN10×½ - Female Tee: 15mm×½, D-DN10×¾ - Female Tee: 15mm×¾, D-DN15×½ - Female Tee: 18mm×½, D-DN15×¾ - Female Tee: 18mm×¾, D-DN20×½ - Female Tee: 22mm×½, D-DN20×¾ - Female Tee: 22mm×¾, D-DN25×½ - Female Tee: 28mm×½, D-DN25×¾ - Female Tee: 28mm×¾, D-DN25×1 - Female Tee: 28 mm×1, D-DN32×½ - Female Tee: 35mm×½, D-DN32×¾ - Female Tee: 35mm×¾, D-DN32×1¼ - Female Tee: 35mm×1¼, D-DN40×½ - Female Tee: 42mm×½, D-DN40×¾ - Female Tee: 42mm×¾, D-DN40×1¼ - Female Tee: 42mm×1¼, D-DN40×1½ - Female Tee: 42mm×1½, D-DN50×½ - Female Tee: 54mm×½, D-DN50×¾ - Female Tee: 54mm×¾, D-DN50×2 - Female Tee: 54mm×2, D-DN10×½ - Male Tee: 15mm×½, D-DN10×¾ - Male Tee: 15mm×¾, D-DN15×½ - Male Tee: 18mm×½, D-DN15×¾ - Male Tee: 18mm×¾, D-DN20×½ - Male Tee: 22mm×½, D-DN20×¾ - Male Tee: 22mm×¾, D-DN25×½ - Male Tee: 28mm×½, D-DN25×¾ - Male Tee: 28mm×¾, D-DN25×1 - Male Tee: 28 mm×1, D-DN32×½ - Male Tee: 35mm×½, D-DN32×¾ - Male Tee: 35mm×¾, D-DN32×1¼ - Male Tee: 35mm×1¼, D-DN40×½ - Male Tee: 42mm×½, D-DN40×¾ - Male Tee: 42mm×¾, D-DN40×1¼ - Male Tee: 42mm×1¼, D-DN40×1½ - Male Tee: 42mm×1½, D-DN50×½ - Male Tee: 54mm×½, D-DN50×¾ - Male Tee: 54mm×¾, D-DN50×2 - Male Tee: 54 mm×2, D-DN10×½ - Male Adapter: 15mm×½, D-DN10×¾ - Male Adapter: 15mm×¾, D-DN15×½ - Male Adapter: 18mm×½, D-DN15×¾ - Male Adapter: 18mm×¾, D-DN20×½ - Male Adapter: 22mm×½, D-DN20×¾ - Male Adapter: 22mm×¾, D-DN20×1 - Male Adapter: 22mm×1, D-DN25×¾ - Male Adapter: 28mm×¾, D-DN25×1 - Male Adapter: 28mm×1, D-DN32×1 - Male Adapter: 35 mm×1, D-DN32×1¼ - Male Adapter: 35mm×1¼, D-DN40×1½ - Male Adapter: 42mm×1½, D-DN50×2 - Male Adapter: 54 m×2, D-DN10 - Equal coupling: 15mm, D-DN15 - Equal coupling: 18mm, D-DN20 - Equal coupling: 22mm, D-DN25 - Equal coupling: 28mm, D-DN32 - Equal coupling: 35mm, D-DN40 - Equal coupling: 42mm, D-DN50 - Equal coupling: 54mm, D-DN15×10 - Reducing coupling: 18×15mm, D-DN20×10 - Reducing coupling: 22×15mm, D-DN20×15 - Reducing coupling: 22×18mm, D-DN25×10 - Reducing coupling: 28×15mm, D-DN25×15 - Reducing coupling: 28×18mm, D-DN25×20 - Reducing coupling: 28×22mm, D-DN32×15 - Reducing coupling: 35×18mm, D-DN32×20 - Reducing coupling: 35×22mm, D-DN32×25 - Reducing coupling: 35×28mm, D-DN40×15 - Reducing coupling: 42×18mm, D-DN40×20 - Reducing coupling: 42×22mm, D-DN40×25 - Reducing coupling: 42×28mm, D-DN40×32 - Reducing coupling: 42×35mm, D-DN50×15 - Reducing coupling: 54×18mm, D-DN50×20 - Reducing coupling: 54×22mm, D-DN50×25 - Reducing coupling: 54×28mm, D-DN50×32 - Reducing coupling: 54×35mm, D-DN50×40 - Reducing coupling: 54×42mm, D-DN10×½ - Female Adapter: 15mm×½, D-DN10×¾ - Female Adapter: 15mm×¾, D-DN15×½ - Female Adapter: 18mm×½, D-DN15×¾ - Female Adapter: 18mm×¾, D-DN20×½ - Female Adapter: 22mm×½, D-DN20×¾ - Female Adapter: 22mm×¾, D-DN25×½ - Female Adapter: 28mm×½, D-DN25×¾ - Female Adapter: 28mm×¾, D-DN25×1 - Female Adapter: 28mm×1, D-DN32×1¼ - Female Adapter: 35mm×1¼, D-DN40×1½ - Female Adapter: 42mm×1½, D-DN50×2 - Female Adapter: 54mm×2, D-DN10×½ - Moving Female Adapter: 15mm×½, D-DN10×¾ - Moving Female Adapter: 15mm×¾, D-DN15×½ - Moving Female Adapter: 18mm×½, D-DN15×¾ - Moving Female Adapter: 18mm×¾, D-DN20×½ - Moving Female Adapter: 22mm×½, D-DN20×¾ - Moving Female Adapter: 22mm×¾, D-DN25×1 - Moving Female Adapter: 28 mm×1, D-DN32×1¼ - Moving Female Adapter: 35mm×1¼, D-DN40×1½ - Moving Female Adapter: 42mm×1½, D-DN50×2 - Moving Female Adapter: 54 mm×2, D-DN10 - Slip coupling: 15mm, D-DN15 - Slip coupling: 18mm, D-DN20 - Slip coupling: 22mm, D-DN25 - Slip coupling: 28mm, D-DN32 - Slip coupling: 35mm, D-DN40 - Slip coupling: 42mm, D-DN50 - Slip coupling: 54mm, DN10×½ - Hexagonal male connector: 15mm×½, DN10×¾ - Hexagonal male connector: 15mm×¾, DN15×½ - Hexagonal male connector: 18 mm×½, DN20×¾ - Hexagonal male connector: 22 mm×¾, DN25×1 - Hexagonal male connector: 28mm×1, DN32×1¼ - Hexagonal male connector: 35 mm×1¼, DN40×1½ - Hexagonal male connector: 42mm×1½, DN50×2 - Hexagonal male connector: 54mm×2, D-DN10 - Caps: 15mm, D-DN15 - Caps: 18mm, D-DN20 - Caps: 22mm, D-DN25 - Caps: 28mm, D-DN32 - Caps: 35mm, D-DN40 - Caps: 42mm, D-DN50 - Caps: 54mm, DN15 - Straight Tube Fittings: 18mm, DN20 - Straight Tube Fittings: 22mm, DN25 - Straight Tube Fittings: 28mm, DN10 - Layflat bridge: 15mm, DN15 - Layflat bridge: 18mm, DN20 - Layflat bridge: 22mm, DN25 - Layflat bridge: 28mm, D-DN25 - Flange adapters: 28mm, D-DN32 - Flange adapters: 35mm, D-DN40 - Flange adapters: 42mm, D-DN50 - Flange adapters: 54mm.

E-DN10 - 90° Equal Elbow: 15mm, E-DN15 - 90° Equal Elbow: 18mm, E-DN20 - 90° Equal Elbow: 22mm, E-DN25 - 90° Equal Elbow: 28mm, E-DN32 - 90° Equal Elbow: 35mm, E-DN40 - 90° Equal Elbow: 42mm, E-DN50 - 90° Equal Elbow: 54mm, E-DN10 - 90° B-type equal elbow: 15mm, E-DN15 - 90° B-type equal elbow: 18mm, E-DN20 - 90° B-type equal elbow: 22mm, E-DN25 - 90° B-type equal elbow: 28mm, E-DN32 - 90° B-type equal elbow: 35mm, E-DN40 - 90° B-type equal elbow: 42mm, E-DN50 - 90° B-type equal elbow: 54mm, E-DN15×10 - 90° Reducing Elbow: 15×18mm, E-DN20×15 - 90° Reducing Elbow: 22×18mm, E-DN25×15 - 90° Reducing Elbow: 28×18mm, E-DN25×20 - 90° Reducing Elbow: 28×22mm, E-DN10×½ - 90° Male Elbow: 15mm×½, E-DN10×¾ - 90° Male Elbow: 15mm×¾, E-DN15×½ - 90° Male Elbow: 18mm×½, E-DN15×¾ - 90° Male Elbow: 18mm×¾, E-DN20×¾ - 90° Male Elbow: 22mm×¾, E-DN25×1 - 90° Male Elbow: 28 mm×1, E-DN32×1¼ - 90° Male Elbow: 35mm×1¼, E-DN40×1½ - 90° Male Elbow: 42mm×1½, E-DN50×2 - 90° Male Elbow: 54mm×2, E-DN10×½ - 90° female elbow: 15mm×½, E-DN10×¾ - 90° female elbow: 15mm×¾, E-DN15×½ - 90° female elbow: 18mm×½, E-DN15×¾ - 90° female elbow: 18mm×¾, E-DN20×¾ - 90° female elbow: 22mm×¾, E-DN25×1 - 90° female elbow: 28 mm×1, E-DN32×1¼ - 90° female elbow: 35mm×1¼, E-DN40×1½ - 90° female elbow: 42mm×1½, E-DN50×2 - 90° female elbow: 54 mm×2, E-DN10 - 45° Equal Elbow: 15mm, E-DN15 - 45° Equal Elbow: 18mm, E-DN20 - 45° Equal Elbow: 22mm, E-DN25 - 45° Equal Elbow: 28mm, E-DN32 - 45° Equal Elbow: 35mm, E-DN40 - 45° Equal Elbow: 42mm, E-DN50 - 45° Equal Elbow: 54mm, E-DN10 - 45° B-type equal elbow: 15mm, E-DN15 - 45° B-type equal elbow: 18mm, E-DN20 - 45° B-type equal elbow: 22mm, E-DN25 - 45° B-type equal elbow: 28mm, E-DN32 - 45° B-type equal elbow: 35mm, E-DN40 - 45° B-type equal elbow: 42mm, E-DN50 - 45° B-type equal elbow: 54mm, E-DN10 - Equal tee: 15mm, E-DN15 - Equal tee: 18mm, E-DN20 - Equal tee: 22mm, E-DN25 - Equal tee: 28mm, E-DN32 - Equal tee: 35mm, E-DN40 - Equal tee: 42mm, E-DN50 - Equal tee: 54mm, E-DN15×10 - Reducing Tee: 18×15mm, E-DN20×10 - Reducing Tee: 22×15mm, E-DN20×15 - Reducing Tee: 22×18mm, E-DN25×10 - Reducing Tee: 28×15mm, E-DN25×15 - Reducing Tee: 28×18mm, E-DN25×20 - Reducing Tee: 28×22mm, E-DN32×10 - Reducing Tee: 35×15mm, E-DN32×15 - Reducing Tee: 35×18mm, E-DN32×20 - Reducing Tee: 35×22mm, E-DN32×25 - Reducing Tee: 35×28mm, E-DN40×15 - Reducing Tee: 42×18mm, E-DN40×20 - Reducing Tee: 42×22mm, E-DN40×25 - Reducing Tee: 42×28mm, E-DN40×32 - Reducing Tee: 42×35mm, E-DN50×20 - Reducing Tee: 54×22mm, E-DN50×25 - Reducing Tee: 54×28mm, E-DN50×32 - Reducing Tee: 54×35mm, E-DN50×40 - Reducing Tee: 54×42mm, E-DN10×½ - Short elbow with female: 15mm×½, E-DN10×¾ - Short elbow with female: 15mm×¾, E-DN15×½ - Short elbow with female: 18mm×½, E-DN15×¾ - Short elbow with female: 18mm×¾, E-DN20×¾ - Short elbow with female: 22mm×¾, E-DN25×½ - Short elbow with female: 28mm×½, E-DN25×¾ - Short elbow with female: 28mm×¾, E-DN25×1 - Short elbow with female: 28mm×1, E-DN10×½ - Female Tee: 15mm×½, E-DN10×¾ - Female Tee: 15mm×¾, E-DN15×½ - Female Tee: 18mm×½, E-DN15×¾ - Female Tee: 18mm×¾, E-DN20×½ - Female Tee: 22mm×½, E-DN20×¾ - Female Tee: 22mm×¾, E-DN25×½ - Female Tee: 28mm×½, E-DN25×¾ - Female Tee: 28mm×¾, E-DN25×1 - Female Tee: 28 mm×1, E-DN32×½ - Female Tee: 35mm×½, E-DN32×¾ - Female Tee: 35mm×¾, E-DN32×1¼ - Female Tee: 35mm×1¼, E-DN40×½ - Female Tee: 42mm×½, E-DN40×¾ - Female Tee: 42mm×¾, E-DN40×1¼ - Female Tee: 42mm×1¼, E-DN40×1½ - Female Tee: 42mm×1½, E-DN50×½ - Female Tee: 54mm×½, E-DN50×¾ - Female Tee: 54mm×¾, E-DN50×2 - Female Tee: 54mm×2, E-DN10×½ - Male Tee: 15mm×½, E-DN10×¾ - Male Tee: 15mm×¾, E-DN15×½ - Male Tee: 18mm×½, E-DN15×¾ - Male Tee: 18mm×¾, E-DN20×½ - Male Tee: 22mm×½, E-DN20×¾ - Male Tee: 22mm×¾, E-DN25×½ - Male Tee: 28mm×½, E-DN25×¾ - Male Tee: 28mm×¾, E-DN25×1 - Male Tee: 28 mm×1, E-DN32×½ - Male Tee: 35mm×½, E-DN32×¾ - Male Tee: 35mm×¾, E-DN32×1¼ - Male Tee: 35mm×1¼, E-DN40×½ - Male Tee: 42mm×½, E-DN40×¾ - Male Tee: 42mm×¾, E-DN40×1¼ - Male Tee: 42mm×1¼, E-DN40×1½ - Male Tee: 42mm×1½, E-DN50×½ - Male Tee: 54mm×½, E-DN50×¾ - Male Tee: 54mm×¾, E-DN50×2 - Male Tee: 54 mm×2, E-DN10×½ - Male Adapter: 15mm×½, E-DN10×¾ - Male Adapter: 15mm×¾, E-DN15×½ - Male Adapter: 18mm×½, E-DN15×¾ - Male Adapter: 18mm×¾, E-DN20×½ - Male Adapter: 22mm×½, E-DN20×¾ - Male Adapter: 22mm×¾, E-DN20×1 - Male Adapter: 22mm×1, E-DN25×¾ - Male Adapter: 28mm×¾, E-DN25×1 - Male Adapter: 28mm×1, E-DN32×1 - Male Adapter: 35 mm×1, E-DN32×1¼ - Male Adapter: 35mm×1¼, E-DN40×1½ - Male Adapter: 42mm×1½, E-DN50×2 - Male Adapter: 54 m×2, E-DN10 - Equal coupling: 15mm, E-DN15 - Equal coupling: 18mm, E-DN20 - Equal coupling: 22mm, E-DN25 - Equal coupling: 28mm, E-DN32 - Equal coupling: 35mm, E-DN40 - Equal coupling: 42mm, E-DN50 - Equal coupling: 54mm, E-DN15×10 - Reducing coupling: 18×15mm, E-DN20×10 - Reducing coupling: 22×15mm, E-DN20×15 - Reducing coupling: 22×18mm, E-DN25×10 - Reducing coupling: 28×15mm, E-DN25×15 - Reducing coupling: 28×18mm, E-DN25×20 - Reducing coupling: 28×22mm, E-DN32×15 - Reducing coupling: 35×18mm, E-DN32×20 - Reducing coupling: 35×22mm, E-DN32×25 - Reducing coupling: 35×28mm, E-DN40×15 - Reducing coupling: 42×18mm, E-DN40×20 - Reducing coupling: 42×22mm, E-DN40×25 - Reducing coupling: 42×28mm, E-DN40×32 - Reducing coupling: 42×35mm, E-DN50×15 - Reducing coupling: 54×18mm, E-DN50×20 - Reducing coupling: 54×22mm, E-DN50×25 - Reducing coupling: 54×28mm, E-DN50×32 - Reducing coupling: 54×35mm, E-DN50×40 - Reducing coupling: 54×42mm, E-DN10×½ - Female Adapter: 15mm×½, E-DN10×¾ - Female Adapter: 15mm×¾, E-DN15×½ - Female Adapter: 18mm×½, E-DN15×¾ - Female Adapter: 18mm×¾, E-DN20×½ - Female Adapter: 22mm×½, E-DN20×¾ - Female Adapter: 22mm×¾, E-DN25×½ - Female Adapter: 28mm×½, E-DN25×¾ - Female Adapter: 28mm×¾, E-DN25×1 - Female Adapter: 28mm×1, E-DN32×1¼ - Female Adapter: 35mm×1¼, E-DN40×1½ - Female Adapter: 42mm×1½, E-DN50×2 - Female Adapter: 54mm×2, E-DN10×½ - Moving Female Adapter: 15mm×½, E-DN10×¾ - Moving Female Adapter: 15mm×¾, E-DN15×½ - Moving Female Adapter: 18mm×½, E-DN15×¾ - Moving Female Adapter: 18mm×¾, E-DN20×½ - Moving Female Adapter: 22mm×½, E-DN20×¾ - Moving Female Adapter: 22mm×¾, E-DN25×1 - Moving Female Adapter: 28 mm×1, E-DN32×1¼ - Moving Female Adapter: 35mm×1¼, E-DN40×1½ - Moving Female Adapter: 42mm×1½, E-DN50×2 - Moving Female Adapter: 54 mm×2, E-DN10 - Slip coupling: 15mm, E-DN15 - Slip coupling: 18mm, E-DN20 - Slip coupling: 22mm, E-DN25 - Slip coupling: 28mm, E-DN32 - Slip coupling: 35mm, E-DN40 - Slip coupling: 42mm, E-DN50 - Slip coupling: 54mm, E-DN10 - Caps: 15mm, E-DN15 - Caps: 18mm, E-DN20 - Caps: 22mm, E-DN25 - Caps: 28mm, E-DN32 - Caps: 35mm, E-DN40 - Caps: 42mm, E-DN50 - Caps: 54mm, E-DN25 - Flange adapters: 28mm, E-DN32 - Flange adapters: 35mm, E-DN40 - Flange adapters: 42mm, E-DN50 - Flange adapters: 54mm.

Product Images

Approval Holder:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Manufacturer:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Range of floor-standing gas combination boilers, supplied with isolation valves, expansion vessel and a pressure relief valve set at 3.0 bar. Maximum working pressure: Primary circuit 2.5 bar, secondary 10 bar. Maximum operating temperature: Primary 82°C / secondary circuit 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

250904711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression.

Marking:

Worcester on front cover. Worcester and product info on label inside cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2030

Model:

7-731-600-297 Greenstar 8000F 35kW Combi NG, 7-731-600-298 Greenstar 8000F 35kW Combi LPG, 7-731-600-299 Greenstar 8000F 50kW Combi NG, 7-731-600-300 Greenstar 8000F 50kW Combi LPG.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company