Range of solder ring copper fittings for use with copper tube to EN 1057. The HLSRDPMFWT and HLSRDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208803

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLSR11ECC-a Elbow 90 degree C X C: 8mm-54mm. HLSR11ECC-b Street Elbow 90 degree Ftg X C: 8mm-54mm. HLSR11ECC-c Street Elbow 45 degree Ftg X C: 8mm-54mm. HLSR11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-e Elbow 45 degree C X C: 8mm-54mm. HLSR11ECC-f Elbow 45 degree Long Turn C X C: 8mm-54mm. HLSR11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-h Elbow 90 degree Long Turn C X C: 8mm-54mm. HLSR20CC-a Slip Straight Coupling C X C: 8mm-54mm. HLSR20CC-b Straight Coupling with dot C X C: 8mm-54mm. HLSR20CC-c Straight Coupling with groove C X C: 8mm-54mm. HLSR21RCC-a Fitting Reducer Ftg X C: 8mm-54mm. HLSR21RCC-b Reducing Coupler C X C: 8mm-54mm and ½”-1”. HLSR30TCC Equal TEE CxCxC: 8mm-54mm. HLSR31TRC Reducing Tee CxCxC: 8mm-54mm. HLSR40CAP Cap: 8mm-54mm. HLSRBGQW Partial Crossover Ftg x C: 12mm-28mm. HLSRGQW Full Crossover C x C: 12mm-28mm. HLSRYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLSRZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLSRDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). The HLSR20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211801

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

HLSR11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLSR11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLSR11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLSR20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLSR20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLSR20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLSR20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLSR30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm. Models added July 2025: HLSR30TB-a Female Tee: 35mm-42mm x 35mm-42mm x ½” BSP (F).

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Ebco Poly B range of compression fittings with gunmetal bodies, for use with PE80 pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1120 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2205306

Size:

20mm - 63mm.

Marking:

Ebco (a brand name of Talis UK Ltd), body cast date (MM/YY) and foundry ID on body

Installation Requirements:

R001

Expiry date:

31/05/2027

Model:

Ebco Poly B range of fittings comprising of: Couplings: GCB20,GCB2025, GCB2032, GCB25, GCB2532,GCB2550, GCB32, GCB3263, GCB5020, GCB5032, GCB63, GCB6320, GCB6325, GCB6350, GCB50, GCB3220& GCB3225. Tees: GTB20, GTB25, GTB2520R, GTB32, GTB3220R, GTB3225R GTB50, GTB5020R, GTB5025R, GTB5032R, GTB6332, GTB6350R & GTB63. Elbows: GEB20, GEB25, GEB32, GEB3225R, GEB50 & GEB63. Adaptors: GAB2F20, GAB2M20, GAB3F25, GAB3M25, GAB4M32, GAB6F50, GAB6M50, GAB6M63, GAB8M63, GAB4F32 & GAB8F63. Joint Reducers: GJR2520B, GJR3225B.

Product Images

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

The 3G Metric Imperial range of plastic compression fittings with polypropylene bodies, compression nut and silicone seal for use with PE80 pipe (manufactured to BS EN 12201). Maximum working pressure: Fittings when used with PE100 pipe = 16.0 bar. Fittings when used with PE80 pipe = 12.0 bar. For above and below ground and cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206349

Size:

see model

Marking:

Philmac and size on nut

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

3G Metric Imperial Range: Wall Plate Elbow models: 98902200 20mm(½”) x ½” 98903100 25mm(¾”) x ½” 98903200 25mm(¾”) x ¾” End Cap models: 98902900 20(½") 98903900 25(¾") 98904900 32(1") 98905900 40(1¼") 98906900 50(1½") 98907900 63(2") Elbow models: 98902800 45˚ 20(½") 98903800 45˚ 25(¾") 98904800 45˚ 32(1") 98905800 45˚ 40(1¼") 98906800 45˚ 50(1½") 98907800 45˚ 63(2") 98952200 20(½") x 20(½") 98953300 25(¾") x 25(¾") 98954400 32(1") x 32(1") 98955500 40(1¼") x 40(1¼") 98956600 50(1½") x 50(1½") 98957700 63(2") x 63(2") 98962100 20(½") x ½" FI BSP 98962200 20(½") x ¾" FI BSP 98963100 25(¾") x ½" FI BSP 98963200 25(¾") x ¾" FI BSP 98963300 25(¾") x 1" FI BSP 98964300 32(1") x 1" FI BSP 98964400 32(1") x 1¼" FI BSP 98965400 40(1¼") x 1¼" FI BSP 98965500 40(1¼") x 1½" FI BSP 98966500 50(1½") x 1½" FI BSP 98966600 50(1½") x 2" FI BSP 98967600 63(2") x 2" FI BSP 98973200 25(¾") x ¾" MI BSP 98974300 32(1") x 1" MI BSP Joiner/Coupler models: 98912200 20(½") x 20(½") 98913300 25(¾") x 25(¾") 98914400 32(1") x 32(1") 98915500 40(1¼") x 40(1¼") 98916600 50(1½") x 50(1½") 98917700 63(2") x 63(2") Reducing Joiner/Coupler models: 98913200 25(¾") x 20(½") 98914200 32(1") x 20(½") 98914300 32(1") x 25(¾") 98915300 40(1¼") x 25(¾") 98915400 40(1¼") x 32(1") 98916300 50(1½") x 25(¾") 98916400 50(1½") x 32(1") 98916500 50(1½") x 40(1¼") 98917400 63(2") x 32(1") 98917500 63(2") x 40(1¼") 98917600 63(2") x 50(1½") End Connector models: 98922100 20(½") x ½" MI BSP 98922200 20(½") x ¾" MI BSP 98922300 20(½") x 1" MI BSP 98923100 25(¾") x ½" MI BSP 98923200 25(¾") x ¾" MI BSP 98923300 25(¾") x 1" MI BSP 98924200 32(1") x ¾" MI BSP 98924300 32(1") x 1" MI BSP 98924400 32(1") x 1¼" MI BSP 98924500 32(1") x 1½" MI BSP 98925300 40(1¼") x 1" MI BSP 98925400 40(1¼") x 1¼" MI BSP 98925500 40(1¼") x 1½" MI BSP 98925600 40(1¼") x 2" MI BSP 98926500 50(1½") x 1½" MI BSP 98926600 50(1½") x 2" MI BSP 98927500 63(2") x 1½" MI BSP 98927600 63(2") x 2" MI BSP 98982100 20(½") x ½" FI BSP 98982200 20(½") x ¾" FI BSP 98982300 20(½") x 1" FI BSP 98983100 25(¾") x ½" FI BSP 98983200 25(¾") x ¾" FI BSP 98983300 25(¾") x 1" FI BSP 98984200 32(1") x ¾" FI BSP 98984300 32(1") x 1" FI BSP 98984400 32(1") x 1¼" FI BSP 98985400 40(1¼") x 1¼" FI BSP 98985500 40(1¼") x 1½" FI BSP 98986500 50(1½") x 1½" FI BSP 98986600 50(1½") x 2" FI BSP 98987500 63(2") x 1½" FI BSP 98987600 63(2") x 2" FI BSP Tee models: 98932200 20(½") x 20(½") x 20(½") 98933300 25(¾") x 25(¾") x 25(¾") 98934400 32(1") x 32(1") x 32(1") 98935500 40(1¼") x 40(1¼") x 40(1¼") 98936600 50(1½") x 50(1½") x 50(1½") 98937700 63(2") x 63(2") x 63(2") 98942100 20(½") x 20(½") x ½" FI BSP 98942200 20(½") x 20(½") x ¾" FI BSP 98943100 25(¾") x 25(¾") x ½" FI BSP 98943200 25(¾") x 25(¾") x ¾" FI BSP 98943300 25(¾") x 25(¾") x 1" FI BSP 98944100 32(1") x 32(1") x ½" FI BSP 98944200 32(1") x 32(1") x ¾" FI BSP 98944300 32(1") x 32(1") x 1" FI BSP 98944400 32(1") x 32(1") x 1½" FI BSP 98945100 40(1¼") x 40(1¼") x ½" FI BSP 98945200 40(1¼") x 40(1¼") x ¾" FI BSP 98945400 40(1¼") x 40(1¼") x 1¼" FI BSP 98945500 40(1¼") x 40(1¼") x 1½" FI BSP 98946100 50(1½") x 50(1½") x ½" FI BSP 98946200 50(1½") x 50(1½") x ¾" FI BSP 98946500 50(1½") x 50(1½") x 1½" FI BSP 98946600 50(1½") x 50(1½") x 2" FI BSP 98947600 63(2") x 63(2") x 2" FI BSP 98993100 25(¾") x 25(¾") x ½" MI BSP 98993200 25(¾") x 25(¾") x ¾" MI BSP Reducing Tee models: 98933200 25(¾") x 25(¾") x 20(½") 98933400 25(¾") x 25(¾") x 32(1") 98934300 32(1") x 32(1") x 25(¾") 98935300 40(1¼") x 40(1¼") x 25(¾") 98935400 40(1¼") x 40(1¼") x 32(1") 98936300 50(1½") x 50(1½") x 25(¾") 98936400 50(1½") x 50(1½") x 32(1") 98936500 50(1½") x 50(1½") x 40(1¼") 98937300 63(2") x 63(2") x 25(¾") 98937400 63(2") x 63(2") x 32(1") 98937600 63(2") x 63(2") x 50(1½") Reducing Elbow models: 98952300 25(¾") x20(½")

Product Images

Approval Holder:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Manufacturer:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206013

Size:

Please refer to model.

Marking:

Victaulic logo, model, size and technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Models added April 2024: Style E155 ‘StrengThin™’ 100 system Expansion Joint: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Manufacturer:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Kuterlite K900 Pro range of compression fittings with DZR brass bodies for use with copper pipe (EN 1254) Maximum working pressure for 8mm-10mm = 70.0 bar. Maximum working pressure for 12mm – 28mm = 20.0 bar. Maximum working pressure for 35mm – 54mm = 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206027

Size:

Please refer to model.

Marking:

Kuterlite PRO, Flow arrow, EN 1254-2 and size on nut. CR on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

K910X: Straight Coupling 10mm to 54mm K911X: (M) Coupling 12mm to 54mm x ¼” BSP (M) to 2” BSP (M) K911PX: (M) Coupling 8mm to 54mm x ½” BSP (F) to 2” BSP (F) K911LBX: Long Tank Coupling 22mm x ¾” BSP (M) & 28mm x 1” BSP (M) K911TCX: Tank Coupling 15mm to 54mm x ½” BSP (M) to 2” BSP (M) K912X: (F) Coupling 12mm to 54mm x 3/8” BSP (F) to 2” BSP (F) K915X: Elbow 12mm to 54mm K916X: (M) Elbow 12mm to 54mm x 3/8” BSP (M) to 2” BSP (M) K916PX: (M) Elbow 15 to 28mm x ½” BSP (M) to 1” BSP (M) K916LBX: Long (M) Elbow 22mm x ¾” BSP (M) K917X: (F) Elbow 12mm to 42mm x 3/8” BSP (F) to 1.1/2” BSP (F) K917WX: (F) Wall Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918X: Equal Tee 10mm to 54mm K918BX: Tee (Reduced) 15mm to 54mm K918EBX: Tee End & Branch 15mm to 28mm K918EEX: Tee (Both Reduced) 12mm to 22mm K920X: (M) End Tee 15mm x ½” BSP (M) x 15mm K920HX: (M) Branch Tee 15mm x 15mm x ½” BSP (M) K923X: Cross 15mm KS926X: Swivel Tap Connector 15mm x ½” BSP (M) to ¾” BSP (M) & 22mm x ¾” BSP (M) K927X: Bent Tap Connector 15mm x ½” BSP (M) & 22mm x ¾” BSP (M) K930X: (F) Branch Tee 15mm to 28mm x 15mm to 28mm x ¼” BSP (F) to 1” BSP (F) K930EX: (F) End Tee 15mm to 28mm x ½” BSP (F) to ¾” BSP (F) x 15mm to 28mm K941X (F) Adaptor 22mm x ¾” BSP (F) K947X: Reducer 8mm to 28mm K948: Reducing Set 22mm to 28mm K949: Reducing Set 35mm to 54mm KS950X: Tank Connector 15mm to 54mm K951X: Stop End 12mm to54mm K953X: Crossover 15mm K972X: Blanking Plug 15mm to 54mm K1870X: Kufit Adaptor 15mm to 22mm K915XCP: Elbow 15mm & 35mm K917WXCP: Backplate Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918XCP: Equal Tee 15mm K918BXCP: Tee (Reduced) 15mm to 28mm K947XCP: One Piece Reducer 15mm to 22mm

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of copper and DZR brass press fit tap connectors for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206045

Size:

½” press fit x ½” BSP captive nut. ¾” press fit x ¾” BSP captive nut.

Marking:

>B< (manufacturer’s logo), DR & size on body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

PIR5002G – Bent Tap Connector PIR5002G040400 & PIR5002G060600. PIR5240G – Straight Tap Connector PIR5240G040400 & PIR5240G060600.

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). The HLE20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211802

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

HLE11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLE11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLE11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLE20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLE20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLE20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLE20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLE30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208804

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLE11ECC-a Elbow 90 degree C X C: 8mm-108mm. HLE11ECC-b Street Elbow 90 degree Ftg X C: 8mm-108mm. HLE11ECC-c Street Elbow 45 degree Ftg X C: 8mm-108mm. HLE11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-e Elbow 45 degree C X C: 8mm-108mm. HLE11ECC-f Elbow 45 degree Long Turn C X C: 8mm-108mm. HLE11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-h Elbow 90 degree Long Turn C X C: 8mm-108mm. HLBGQW Partial Crossover Ftg x C: 12mm-28mm. HLE20CC-a Straight Coupling with dot C X C: 8mm-108mm. HLE20CC-b Slip Straight Coupling C X C: 8mm-108mm. HLE20CC-c Straight Coupling with groove C X C: 8mm-108mm. HLE21RCC-a Fitting Reducer Ftg X C: 8mm-108mm. HLE21RCC-b Reducing Coupler C X C: 8mm-108mm and ½” - 1”. HLE30TCC-a Equal TEE CxCxC: 8mm-108mm. HLE30TCC-b DWV Equal TEE CxCxC: 12mm-54mm. HLE31TRC Reducing Tee CxCxC: 8mm-108mm. HLE40CAP Cap: 8mm-108mm. HLGQW Full Crossover C x C: 12mm-28mm. HLNSZJ Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). HLUXW Return Bend Stop: 15mm-54mm. HLWSZJ Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). HLYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed copper or gunmetal solder fittings for use with copper pipe. Maximum working pressure 16.0 bar (Sizes 8 - 28mm). Maximum working pressure 10.0 bar (Sizes 35 - 108mm). Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207803

Size:

8mm to 108mm

Marking:

Viega on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Copper models: 95002A - elbow 90°, 95001A - elbow 90°, 95041 - elbow 45°, 95040 - elbow 45°, 95090 - elbow 90°, 95092 - elbow 90°, 95103 - T-piece, 95085 - crossover, 95086 - crossover, 95270 - coupling, 95240 - reducing coupling, 95243 - reducing, 95301 - cap. Gunmetal models: 94130G - T-piece, 94243G - adapter, 94472G - Wall plate, 94090G - adapter elbow 90°, 94280G - adapter, 94270G - adapter, 94246G - plug-in piece, 94092G - adapter elbow 90°, 94340 - screw fitting, 94471G - wall plate elbow, 94096G - adapter union elbow 90°, 94340G - adapter union.

Approval Holder:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Range of heat exchangers connected to copper waste pipe, Where the waste is discharged down a “rotator” into a copper waste pipe, and potable water is returned to the shower/heating device via a copper double walled jacket around the copper waste pipe. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:

1350 Heat Exchangers

Size:

½” BSP (F)

Marking:

Manufacturer ( Builidng Product Distribution) Manufacturer address Type Category BPD Ltd Serial No. Model & other information on Adhesive label.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Showersave: QB1-21C QB1-16C QB1-12C QB1-21 Cyclone QB1-21 QB1-16 QB1-12 QB1-21D QB1-21D HE Models added June 2024 - maximum working pressure of 10.0 bar. QBI-2IXE QBI-I0XE

Product Images

Approval Holder:

BPD Limited

Company Name

BPD Limited

Address

View All Listings by this Company

Range of compact wall outlet assemblies with plastic bodies (chromium plated) and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 55°C.

Section:

1530 Miscellaneous Fittings

Size:

ø15mm

Marking:

Elisa on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2026

Model:

706082 - ELISA COMPACT WALL OUTLET ASSEMBLIES

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Manifold comprising of a PVC-U stub flange, PVC-U pipe and PVC-U tee fitting. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

DN80 flanged connections.

Marking:

Socotec, Socotec logo, model and other tech info on adhesive label on body

Installation Requirements:

R001 R120

Expiry date:

30/06/2027

Model:

CLO2 Chlorine Dioxide Dosing Manifold

Product Images

Approval Holder:

SOCOTEC UK Limited

Company Name

SOCOTEC UK Limited

Address

SOCOTEC House Bretby Business Park Bretby

Postcode

DE15 0YZ

Country

Burton-on-Trent

View All Listings by this Company

Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

¾” BSP (F) captive nut x ¾” BSP( M) x 3/4” BSP (M)

Marking:

SF (Brand of Kingfisher) PN10, and size on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

EPH_WAS20_0056

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of installation kits with brass bodies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2206023

Size:

¾” (M) to ½” (F) BSP Adaptor

Marking:

SHS on body

Installation Requirements:

R001 R010

Expiry date:

30/06/2027

Model:

V718-IS- XX – Installation Kit Rough V818-IS-XX – Installation Kit Rough (Unassembled) V758-IS-XX – Installation Kit Rough – Spout Rough Only V718-IS-EXT-XX 25mm Extension Kit XX denotes the surface finish. It will always appear as the last digits of the product code as a combination of two or three letters or numbers, as examples: CP = chrome finish, URM urban brass matt lacquered.

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of brass (chrome plated) quick fit connectors. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2204088

Note:

Open outlet use only

Size:

See models

Marking:

AQUATOOLS on body.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AT821122 (F), AT821123 ½” BSP (M), AT821124 (M) & AT821125 (M) quick fit connectors

Approval Holder:

AQUATOOLS

Company Name

AQUATOOLS

Address

26 rue Charles Edouard Jeanneret 78300 Poissy

Country

France

View All Listings by this Company

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104076

Size:

1 ¼” BSP (F) – 2” BSP (F)

Marking:

Stuart Turner, model number and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

HM 0302 230 M 50 HM 0303 230 M 50 HM 0304 230 M 50 HM 0305 230 M 50 HM 0306 230 M 50 HM 0307 230 M 50 HM 0308 230 M 50 HM 0309 230 M 50 HM 0302 230-400 T 50 HM 0303 230-400 T 50 HM 0304 230-400 T 50 HM 0305 230-400 T 50 HM 0306 230-400 T 50 HM 0307 230-400 T 50 HM 0308 230-400 T 50 HM 0309 23 0-400 T 50 HM 0502 230 M 50 HM 0503 230 M 50 HM 0504 230 M 50 HM 0505 230 M 50 HM 0506 230 M 50 HM 0507 230 M 50 HM 0508 230 M 50 HM 0509 230 M 50 HM 0502 230-400 T 50 HM 0503 230-400 T 50 HM 0504 230-400 T 50 HM 0505 230-400 T 50 HM 0506 230-400 T 50 HM 0507 230-400 T 50 HM 0508 230-400 T 50 HM 0509 23 0-400 T 50 HM 0902 230 M 50 HM 0903 230 M 50 HM 0904 230 M 50 HM 0905 230 M 50 HM 0906 230 M 50 HM 0907 230 M 50 HM 0902 230-400 T 50 HM 0903 230-400 T 50 HM 0904 230-400 T 50 HM 0905 230-400 T 50 HM 0906 230-400 T 50 HM 0907 230-400 T 50 HM 0908 23 0-400 T 50 HM 1502 230 M 50 HM 1503 230 M 50 HM 1502 230-400 T 50 HM 1503 230-400 T 50 HM 1504 230-400 T 50 HM 1505 230-400 T 50 HM 1506 230-400 T 50 HM 1507 23 0-400 T 50 HM 2002 230 M 50 HM 2002 230-400 T 50 HM 2003 230-400 T 50 HM 2004 230-400 T 50 HM 2005 230-400 T 50 Type code: HM XY Z L 50 HM: product name X: flow rate Y: number of impellers Z: motor voltage L: motor phase M=single phase; T=three phase 50: frequency

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

‘3ME’ Range of horizontal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. The products are supplied with a carbon/ceramic/EPDM shaft seal. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2206044

Size:

SUCTION FLANGE (TO DIN 2532): 32-125/160/200 models: DN50, 40-125/160/200 models: DN65, 50-125/160/200 models: DN65, 65-125/160/200 models: DN80. DISCHARGE FLANGE (TO DIN 2532): 32-125/160/200 models: DN32, 40-125/160/200 models: DN40, 50-125/160/200 models: DN50, 65-125/160/200 models: DN65.

Marking:

Ebara, model, CE and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/06/2027

Model:

3ME 32-125/1,1 M (Product code: 1300206600), 3ME 32-160/1,5 M (Product code: 1300206700), 3ME 32-160/2,2 M (Product code: 1300306600), 3ME 40-125/1,5 M (Product code: 1320376600), 3ME 40-125/2,2 M (Product code: 1320276600), 3ME 50-125/2,2 M (Product code: 1330506600), 3ME/I 32-125/1,1 IE3 (Product code: 1300206604I), 3ME/I 32-125/1,1 SCA IE3 (Product code: 1300206504I), 3ME/I 32-125/1,5 SCA IE3 (Product code: 1300206704I), 3ME/I 32-160/1,5 IE3 (Product code: 1300206804I), 3ME/I 32-160/1,5 IE3 SCA (Product code: 1300206904I), 3ME/I 32-160/2,2 IE3 (Product code: 1300306604I), 3ME/I 32-160/2,2 SCA IE3 (Product code: 1300306704I), 3ME/I 32-200/1,1 CARTER IE3 (Product code: 1300206104I), 3ME/I 32-200/1,5 CARTER IE3 (Product code: 1300206114I), 3ME/I 32-200/2,2 CARTER IE3 (Product code: 1300302604I), 3ME/I 32-200/3 IE3 (Product code: 1310406604I), 3ME/I 32-200/3 IE3 SCA (Product code: 1310409604I), 3ME/I 32-200/4 CARTER IE3 (Product code: 1310558704I), 3ME/I 32-200/4 IE3 (Product code: 1310556604I), 3ME/I 32-200/4 SCA (Product code: 1310556704I), 3ME/I 32-200/5,5 IE3 (Product code: 1310756606I), 3ME/I 32-200/5,5 SCA IE3 (Product code: 1310756706I), 3ME/I 32-200/7.5 IE3 (Product code: 1310906604I), 3ME/I 32-200/7.5 IE3 SCA (Product code: 1310906704I), 3ME/I 40-125/1,5 IE3 (Product code: 1320376604I), 3ME/I 40-125/1,5 SCA IE3 (Product code: 1320376704I), 3ME/I 40-125/2,2 IE3 (Product code: 1320276604I), 3ME/I 40-125/2,2 SCA IE3 (Product code: 1320276704I), 3ME/I 40-160/3 IE3 (Product code: 1320406604I), 3ME/I 40-160/3 SCA IE3 (Product code: 1320406704I), 3ME/I 40-160/4 IE3 (Product code: 1320556604I), 3ME/I 40-160/4 SCA IE3 (Product code: 1320556704I), 3ME/I 40-200/11 IE3 EN (Product code: 1330916606I), 3ME/I 40-200/11 SCA IE3 (Product code: 1330916706I), 3ME/I 40-200/3 CARTER IE3 (Product code: 1320402704I), 3ME/I 40-200/4 CARTER IE3 (Product code: 1320556504I), 3ME/I 40-200/5,5 IE3 EN (Product code: 1330756604I), 3ME/I 40-200/5,5 SCA IE3 (Product code: 1330756904I), 3ME/I 40-200/7,5 IE3 (Product code: 1330906604I), 3ME/I 40-200/7,5 SCA IE3 (Product code: 1330906704I), 3ME/I 50-125/2,2 IE3 (Product code: 1330506604I), 3ME/I 50-125/2,2 SCA IE3 (Product code: 1330506704I), ME/I 50-125/3 (126) (Product code: 6130002990:), 3ME/I 50-125/3 IE3 (Product code: 1330556604I), 3ME/I 50-125/3 SCA IE3(Product code: 1330556704I), 3ME/I 50-125/3R (D126) (Product code: 1330556404I), 3ME/I 50-125/4 IE3 (Product code: 1330406604I), 3ME/I 50-125/4 SCA IE3 (Product code: 1330406704I), 3ME/I 50-160/5,5 230/400_50 IE3 (Product code: 1330902504I), 3ME/I 50-160/5,5 IE3 EN (Product code: 1330906606I), 3ME/I 50-160/5,5 SCA IE3 (Product code: 1330906706I), 3ME/I 50-160/7,5 IE3 (Product code: 1330896606I), 3ME/I 50-160/7,5 R154 IE3 (Product code: 1330896806I), 3ME/I 50-160/7,5 SCA IE3 (Product code: 1330896706I), 3ME/I 50-200/11 IE3 (Product code: 1330966606I), 3ME/I 50-200/11 IE3 STAC (Product code: 1330964006I), 3ME/I 50-200/11 SCA IE3 (Product code: 1330966706I), 3ME/I 50-200/116 380-460/660SCA (Product code: 1330966716I), 3ME/I 50-200/15 IE3 (Product code: 1330986606I), 3ME/I 50-200/15 SCA IE3 (Product code: 1330986706I), 3ME/I 50-200/5,5 CARTER IE3 (Product code: 1330906106I), 3ME/I 50-200/7,5 CARTER IE3 (Product code: 1330890206I), 3ME/I 50-200/9,2 IE3 (Product code: 1330976606I), 3ME/I 50-200/9,2 SCA IE3 (Product code: 1330976706I), 3ME/I 65-125/4 IE3 (Product code: 1344126604I), 3ME/I 65-125/4 SCA IE3 (Product code: 1344126804I), 3ME/I 65-125/5,5 IE3 (Product code: 1344136604I), 3ME/I 65-125/5,5 SCA IE3 (Product code: 1344136704I), 3ME/I 65-125/5.5R (D128) (Product code: 1344136404I), 3ME/I 65-125/7,5 230/400_50 IE3 (Product code: 1344146606I), 3ME/I 65-125/7,5 IE3 (Product code: 1344146604I), 3ME/I 65-125/7,5 SCA IE3 (Product code: 1344146804I), 3ME/I 65-125/7.5R (D138) (Product code: 1344146404I), 3ME/I 65-160/11 IE3 (Product code: 1345166604I), 3ME/I 65-160/11 SCA (Product code: 1345166704I), 3ME/I 65-160/15 IE3 (Product code: 1345176604I), 3ME/I 65-160/15 IE3 (Product code: 1345176704I), 3ME/I 65-160/7,5 IE3 (Product code: 1345146604I), 3ME/I 65-160/7,5 SCA IE3 (Product code: 1345146704I), 3ME/I 65-160/9,2 IE3 (Product code: 1345156604I), 3ME/I 65-160/9,2 SCA IE3 (Product code: 1345156704I), 3ME/I 65-200/15 IE3 (Product code: 1346176604I), 3ME/I 65-200/15 SCA IE3 (Product code: 1346176704I), 3ME/I 65-200/18,5 IE3 (Product code: 1346186604I), 3ME/I 65-200/18,5 IE3 SCA (Product code: 1346186704I), 3ME/I 65-200/22 IE3 (Product code: 1346196604I), 3ME/I 65-200/22 IE3 STAC (Product code: 1346193904I), 3ME/I 65-200/22 SCA IE3 (Product code: 1346196704I).

Product Images

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Manufacturer:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Range of shower arms, ceiling arms, water intakes and wall mounted outlet brackets with either chrome plated brass or stainless steel). Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2204087

Note:

Open outlet use only.

Marking:

CP HART on base plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2027

Model:

Wall mounted shower arms: CPHSP2138, ZCPHSP2138, CPHSP213830, ZCPHSP213830, CPHSP213845 , ZCPHSP213845, CPHSP2584, ZCPHSP2584, CPHSP2585, ZCPHSP2585, CPHSP2538, ZCPHSP2538, CPHSP2945, ZCPHSP2945, CPHSP2946, ZCPHSP2946, CPHSP2587 & ZCPHSP2587 Ceiling mounted shower arms: CPHSP2586 & ZCPHSP2586 Water Intakes: CPHSP2013, ZCPHSP2013, CPHSP2954 & ZCPHSP2954 Wall outlet CPHSP2172, ZCPHSP2172, CPHSP2287, ZCPHSP2287, CPHSP2951, ZCPHSP2951, CPHSP2438, ZCPHSP2438, CPHSP2690 & ZCPHSP2690

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

A range of shower kits and hand showers incorporating metal bodies (chrome plated). Some models are supplied with sliding rails, wall elbows and shower hoses (see models). Maximum working temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2112065

Note:

For open outlet use only

Size:

½” BSP (M)

Marking:

CP HART on handset.

Installation Requirements:

R001 R040

Expiry date:

31/12/2026

Model:

ZCPHSP2150 & CPHSP2150 - Sliding rail with double braided hose and brass hand shower ZCPHSP2953SS & CPHSP2953SS - Sliding metal hose and inox hand shower ZCPHSP22874 & CPHSP22874- Shower kit with wall outlet, PVC hose and abs hand shower ZCPHSP22874OT & CPHSP22874OT - Shower kit with water elbow, double braided hose and brass hand shower ZCPHSP29514SS & CPHSP29514SS - Shower kit with metal hose and inox hand shower ZCPHSP2956SS & CPHSP2956SS - Hand shower

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company