Cistern - Flushing

Section Code 2035 : Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

Back To Directory Sections

#2004906

BS EN 14055 (2010) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap with a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2004906
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Top of outlet drop valve marked ‘Dudley’ and ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Expiry date:
30/04/2025
Model:
ACCLAIM V WC CISTERN & ACCLAIM S WC CISTERN

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2009910

BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve (Phantom T & Phantom V) or dual flush syphon (Phantom S) for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2009910
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked ‘Cascade +’ Top of Pneumatic drop valve is marked ‘TD’ Top of Cable Operated Drop Valve marked ‘Dudley Water Saving Solutions’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Expiry date:
30/09/2025
Model:
Phantom S, Phantom V & Phantom T WC Cistern
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2010908

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern is operated by a manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2010908
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R556
Expiry date:
31/10/2025
Model:
OSMO T1 Concealed Cistern (Category 3).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2007377

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2007377
Size:
½” BSP (M)
Marking:
Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield. Valsir on ourlet device. Valsir on body. Date of manufacture on body MM/YY. Date clock format 01/20 and 6l water line moulded on body inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/07/2025
Model:
VS0853275UK. VS0853247UK. VS0853276UK. VS0853008UK. VS0853279UK. VS0853212UK. VS0853004UK. VS0853327UK. VS0853328UK. VS0853202UK. VS0853201UK. VS0853305UK. VS0853306UK. VS0853002UK. Models added April 2023: VS0853245UK VS0881305UK VS0853269UK Model added July 2023: VS0853052UK

Approval Holder:
Valsir Spa
Company Name
Valsir Spa
Address
MERLARO 2 STREET VESTONE
Postcode
25078
Country
Italy
Phone
+39 365 877011
General Email
valsir@valsir.it

View All Listings by this Company
Manufacturer:
Valsir Spa
Company Name
Valsir Spa
Address
MERLARO 2 STREET VESTONE
Postcode
25078
Country
Italy
Phone
+39 365 877011
General Email
valsir@valsir.it

View All Listings by this Company

Print This Approval


#2012045

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012045
Size:
½” BSP (M)
Marking:
WDI, Manufactures Mark ''ECO'' and model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
K301-A01-E01002 WC concealed dual flushing cistern Frame included K301-A01-E01003 WC concealed dual flushing cistern Frame included K301-B01-E01002 WC concealed dual flushing cistern Insert frame included K301-B01-E01003 WC concealed dual flushing cistern Insert frame included K301-D01-E01002 WC concealed dual flushing cistern No frame K301-D01-E01003 WC concealed dual flushing cistern No frame

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012047

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012047
Size:
½” BSP (M)
Marking:
WDI, manufacturers mark (ECO) and model number on cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
K133-A01-E01002 WC concealed dual flushing cistern Frame included K133-A01-E01003 WC concealed dual flushing cistern Frame included K133-A02-E01002 WC concealed dual flushing cistern Frame included K133-A02-E01003 WC concealed dual flushing cistern Frame included K133-D01-E01002 WC concealed dual flushing cistern No frame K133-D01-E01003 WC concealed dual flushing cistern No frame

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012048

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012048
Size:
½” BSP (M)
Marking:
WDI, manufacture mark (ECO) and model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
K210-A01-E01002 WC concealed dual flushing cistern Frame included K210-A04-E01002 WC concealed dual flushing cistern Frame included K210-D01-E01002 WC concealed dual flushing cistern No frame K210-D03-E01002 WC concealed dual flushing cistern No frame

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012927

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012927
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on front or side of cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2025
Model:
Mirage WC Cistern
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012903

BS EN 14055 (2018) concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve discharging via a type AG airgap and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. The cistern is operated by manual push button/push plate. The side entry inlet valve is mounted internally and is supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012903
Size:
½” BSP Male or 15mm push-fit.
Marking:
Dudley, TD Logo & Thomas Dudley Ltd. on inspection cover. ‘TD’, on top of outlet drop valve. ‘HYDROFLO’ on discharge cap of inlet valve. ‘DUDLEY BS 1212/4’ on nut of inlet valve.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2025
Model:
OBC Concealed Cistern (Category 3).
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012905

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012905
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on inside of cistern lid.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
Slimline WC Cistern.
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012320

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. For use with cold water only. Maximum working pressure 10.0 bar.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012320
Size:
½” BSP (M)
Marking:
Grohe logo on cistern & flush plate. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
38.422.10A
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2012321

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012321
Size:
½” BSP (M)
Marking:
Grohe logo on cistern. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
38.661.10A
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2007355

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2007355
Size:
½” BSP (M)
Marking:
Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield Valsir on outlet device Valsir on body Date of manufacture on body MM/YY Date clock format 01/20 6l water line moulded on body inside cistern
Installation Requirements:
R001 R280 R556
Expiry date:
31/07/2025
Model:
VS0858002UK TROPEA S MURARE C/FOD+RETE MECCANICA VS0858312UK TROPEA S MUR C/FOD+RETE MEC ARIAPUR 80 VS0858322UK TROPEA S MUR. C/FOD+RETE MEC ARIAPUR LED VS0858211UK TROPEA S BLOCK S90 MECC D90 VS0858321UK TROPEA S BLOCK MEC S90 D90/90 ARIAPUR 80 VS0858332UK TROPEA S BLOCK MEC S90 90/90 ARIAPUR LED
Product Images

Approval Holder:
Valsir Spa
Company Name
Valsir Spa
Address
MERLARO 2 STREET VESTONE
Postcode
25078
Country
Italy
Phone
+39 365 877011
General Email
valsir@valsir.it

View All Listings by this Company
Manufacturer:
Valsir Spa
Company Name
Valsir Spa
Address
MERLARO 2 STREET VESTONE
Postcode
25078
Country
Italy
Phone
+39 365 877011
General Email
valsir@valsir.it

View All Listings by this Company

Print This Approval


#2103327

WC flushing cistern incorporating a bottom entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a pnuematic push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103327
Size:
½” BSP (M)
Marking:
Geberit on cistern casing. 6l water line inside cistern. Geberit on flush actuators.
Installation Requirements:
R001 R280 R560 R556
Expiry date:
31/03/2026
Model:
109.724.21.2 109.721.00.2 111.207.00.2 111.206.21.2
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2103302

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103302
Size:
½” BSP (M) inlet connection
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/03/2026
Model:
8502.38 WC cistern (without frame) 8522.38 with dry wall frame height 1120mm 8524.38 with dry wall frame height 1120mm 8530.38 with dry wall frame height 980mm
Product Images

Approval Holder:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2103303

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103303
Size:
½” BSP (M) inlet connection.
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/03/2026
Model:
8504.38 WC cistern (without frame) 8533.38 with dry wall frame height 820mm
Product Images

Approval Holder:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2106002

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The cistern incorporates an angled servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106002
Size:
½" BSP (M)
Marking:
Fluidmaster label on front of cistern. Schwab on label inside cistern and on flush plate surround.
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
5-481-515 Concealed Cistern UP 189 - 747 (cistern only). 5-399-135 DUPLO WC 189 PREMIUM 747 FV (cistern with frame).

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2012089

AQUAECO RANGE OF WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012089
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K301-AO1-ESG2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED, AQP-K301-B01-ESG2 WC CONCEALED DUAL FLUSHING CISTERN INSERT FRAME INCLUDED & AQP-K301-DO1-ESG2WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING

Approval Holder:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012090

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012090
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K133-A01-ESG2 WC concealed dual flushing cistern Frame included

Approval Holder:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012091

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012091
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K210-A01-ESG2 WC concealed dual flushing cistern Frame included AQP-K210-D03-ESG2 WC concealed dual flushing cistern No frame

Approval Holder:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2107002

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. There is a flow restrictor and stainless-steel strainer on the inlet valve. The cistern is operated by a manual push button. Maximum operating pressure 8.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2107002
Size:
½” BSP (M) inlet
Marking:
Harrisson Bathrooms Logo on body. 6L mark in cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/07/2026
Model:
CISTERN002
Product Images

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company
Manufacturer:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Print This Approval


#2012102

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012102
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & MODEL ON CISTERN BODY
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
WCF118X50-VS+2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED WCC57X46+2 WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2012103

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012103
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
WCF82X50+2 WC concealed dual flushing cistern Frame included WCF98X50+2 WC concealed dual flushing cistern Frame included WCC47X46+2 WC concealed dual flushing cistern No frame

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2012101

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012101
Size:
½” BSP (M)
Marking:
"X" Crosswater logo and model number on cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
WCF118X50+2 WC concealed dual flushing cistern Frame included

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company
Manufacturer:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2109022

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109022
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Fluidmaster, model and flushing volumes inside of cistern. Olympia on operating buttons. Model added April 2022: Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
T02-0100WRAS1, T02-0100WRAS2 & T02-0100WRAS3. Model added April 2022: T02-0800WRAS3
Product Images

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2110097

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2110097
Size:
½” BSP (M)
Marking:
Fluidmaster on cistern. Schwab brandname on operating button.
Installation Requirements:
R001 R556
Expiry date:
31/10/2026
Model:
5-474-025 UP FRONT-TOP 187 - 747 (cistern only). 5-398-070 DUPLO WC 187 83 cm 747 FV (cistern with frame).
Product Images

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2106003

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106003
Size:
1/2” BSP (M).
Marking:
Fluidmaster and model number inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
T06-0800WRAS2 3-4.5 Ltr. T06-0800WRAS1 3-4.5 Ltr. T06-0100WRAS1 3-6Ltr. T06-0100WRAS2 3-6Ltr.

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2111035

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111035
Size:
1/2" BSP (M)
Marking:
Rongji (brand of manufacturer), model number inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
ET336-F ET336
Product Images

Approval Holder:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company
Manufacturer:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

Print This Approval


#2111323

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111323
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, OLI PLUS MEC, product date DD/MM/YY 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
OLI120 PLUS MEC OLI120 PLUS PNEU
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2111356

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111356
Size:
½ “BSP (F) captive nut
Marking:
Vitra etched on flush plate, 6L waterline mark within cistern Vitra on Styropor cover External body states: Vitra, date of manufacture (DD/MM/YY), EN14055, 6L water level
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
742-5805-01. 742-4805-01. 742-1735-01 (model no longer available for purchase from February 2023).
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2112322

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112322
Size:
½” BSP (M)
Marking:
Adhesive label below insert within cistern: OLI, actuation method, product date (DD/MM/YYYY) & OLI on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
Expert Plus Mec 1130 Expert Plus Mec 820 Expert Plus Pneu 1130 Expert Plus Pneu 820 Expert Plus Cable 1130 Expert Plus Cable 820
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2112331

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112331
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, actuation method, product date DD/MM/YY OLI etched on flush plate 6L waterline mould to casing withtin cistern
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
OLI74 Plus Mec OLI74 Plus Pneu
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2112346

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112346
Size:
½” BSP (M)
Marking:
Geberit label on cistern. Month/Year date clock on rear cistern Geberit on flush plate. 6L waterline mould within cistern
Installation Requirements:
R001 R571
Expiry date:
31/12/2026
Model:
Geberit Omega concealed cistern 109.041.00.1 109.051.00.1 109.061.00.1 Geberit Omega Duofix frame for wall hung WC, 111.004.00.1 111.031.00.1 111.061.00.1 Model added July August 2023: 111.004.00.3 Model added February 2025 111.004.00.4
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2112907

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a lever operated dual flush syphon with full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112907
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2026
Model:
Elite WC Cistern.
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2112329

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres and incorporates a servicing valve and flexible hose on the inlet supply.The cistern is operated by a pnuematic push button Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112329
Size:
½” BSP (M)
Marking:
Geberit on cistern and inlet valve.
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
109.103.21.2 109.104.21.2 109.105.00.1 458.118.21.2 458.119.21.2 458.132.00.1 Model added May 2023: 458.145.00.1 Models added March 2024: 458.151.21.1 458.152.21.1
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2112010

Concealed WC dual flushing cistern with a BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush valve is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112010
Size:
1/2" BSP (M)
Marking:
Geberit on push buttons, 6 litres inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2026
Model:
Geberit Concealed Cistern Type 720
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2109063

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109063
Size:
15mm Compression
Marking:
Noken Porcelanosa, model and flushing volumes inside of cistern. Noken on operating buttons.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294206 & 100294199 WC CISTERN

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106050
Size:
1/2” BSP (M).
Marking:
NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2201033

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Incorporating a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201033
Size:
½” BSP (M).
Marking:
Geberit on cistern and operating members. 6 litre mark in cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2027
Model:
Geberit Sigma 12cm concealed cistern 6/3 litres and Duofix wall frames: 109.309.00.5 Cistern only with push fit flush pipe, 111.352.00.5 Wall frame with cistern H112cm, less abled installation, 111.384.00.5 Wall frame with cistern H112cm, 111.383.00.5 Wall frame with cistern H112cm, wall anchors & connection bend, 111.911.00.5 Wall frame with cistern H98cm, wall anchors & connection bend. Models added July 2023: 111.383.00.3, 111.911.00.3.
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2203336

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203336
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm 9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm 9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm 9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm 9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm 9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. 9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm 9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added February 2023 9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm
Product Images

Approval Holder:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company
Manufacturer:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company

Print This Approval


#2203328

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203328
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
761-1746-01UK & 761-5826-01-UK

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2203329

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203329
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
761-1745-01UK & 761-5825-01-UK
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2203330

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203330
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
761-1740-01UK & 761-5805-01-UK
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2201058

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve and a stainless steel braided PEX lined flexible hose assembly. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201058
Size:
½” BSP (M).
Marking:
WDI, ECO, model number and 6 litre line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2027
Model:
K212-D01-E01001, K212-D03-E01001211, K212-A04-E01002, K212-A01-E01001, K212-A04-E01001, K212-A01-E01002.
Product Images

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2106053

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106053
Size:
1/2” BSP (M).
Marking:
Vitra, flush volume and model number inside cistern. Vitra on front of cistern
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
WC CISTERNS 760-1720-01 3-6 LTR & 760-5805-01 3-6LTR

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2112363

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112363
Size:
½” BSP (M)
Marking:
Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2206363

Range of concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206363
Size:
½” BSP (M).
Marking:
Geberit on adhesive label on front of cistern Model No. & other information on adhesive label within cistern 6L waterline mould on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
109.205.00.1 Geberit Kappa concealed cistern 15 cm, 6 / 3 litres, installation height 82 cm. 111.260.00.1 Geberit Duofix frame for wall-hung WC, 82 cm, with Kappa concealed cistern 15 cm. Model added July 2023: 111.260.00.3.
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2207046

Range of WC flushing cisterns incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207046
Size:
½” BSP (F)
Marking:
Roper Rhodes and models number on label on front of cistern. 6 Litre inside.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9009 TR9005 TR9015 Models added March 2024 INST13005 INST13015 INST13009
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2206364

WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206364
Size:
½” BSP (F).
Marking:
VITRA on adhesive label & 6L water line on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
762-1735-01, 762-5805-01, 762-4805-01 & 762-5855-01 Model added April 2023: 732-5805-01.
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2207048

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207048
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R280 R556 R571 R581 R001
Expiry date:
31/07/2027
Model:
TR9008. Model added March 2024 INST13008
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207049

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207049
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9002 Model added March 2024 INST13002
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2203378

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203378
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
FF9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm FF9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm FF9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm FF9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm FF9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm FF9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. FF9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm FF9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added March 2023: FF9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm

Approval Holder:
Bathroom Engineering Ltd (Tece UK)
Company Name
Bathroom Engineering Ltd (Tece UK)
Address
The Boathouse Wirral Park Road
Postcode
BA6 9XE
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2211005

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2211005
Size:
½” BSP (M)
Marking:
Harrison Bathrooms Logo on access panel, 6 Litre line inside cistern.
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
30/11/2027
Model:
CISTERN003
Product Images

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company
Manufacturer:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Print This Approval


#2112367

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112367
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
TRC-101 ROCCO 2 & TRC-107 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2112368

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112368
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
TRC-104 ROCCO 2 SLIMLINE & TRC-106 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2206330

Concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a angle valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206330
Size:
3/8” BSP Captive nut
Marking:
Alca on adhesive label on cistern, Alca printed on flush plate. 6L & waterline moulded within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
AM101
Product Images

Approval Holder:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company
Manufacturer:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company

Print This Approval


#2212904

Range of high and low level BS EN 14055 (2018) WC cisterns incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush or mono flush syphon for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres.. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212904
Size:
½” BSP Male inlet connection
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R560 R556 R581
Expiry date:
31/12/2027
Model:
Trishell WC Cistern.
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2212064

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212064
Size:
½” BSP (M)
Marking:
T1803 - WRAS, Model name and Bestter on bottom of cistern, 6 Litre inside of cistern. T1900 & T1901 - WRAS, Model name and Bestter on support bracket inside of cistern, 6 Litre inside of cistern Models Added December 2023: T1811: Bestter logo and WRAS approved product on bottom of cistern T1900 (600) – T19001 (600) t1900 Bestter logo and WRAS approved product on front of support bracket
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
T1900 (500mm) with frame T1901 (500mm) without frame T1803 Models Added December 2023: T1811 T1900(600mm) T1901(600mm)
Product Images

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2212343

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212343
Size:
½” BSP (M).
Marking:
R&T on adhesive label on body. R&T, model number moulded on fixed plate. 6L waterline printed within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2027
Model:
G3004, G3005, G3008.
Product Images

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

Print This Approval


#2212315

Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212315
Size:
½” BSP (M).
Marking:
R&T, model code printed on fixed plate. 6L waterline printed within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/12/2027
Model:
G3003.

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

Print This Approval


#2301072

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301072
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/01/2028
Model:
TR9001 / VOR790/ INST13001
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2301334

Concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301334
Size:
½” BSP (M
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
OLI74 Plus Electronic
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2301335

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301335
Size:
½” BSP (M)
Marking:
OLI etched on flush panel; OLI, OLI120 Plus Elect, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
OLI 120 Plus Electronic
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2303016

Range of inlet control valves with DZR brass bodies incorporating a pressure reducing valve (set at 1.5, 1.8. 2.0, 2.1, 3.0 or 3.5 depending on model) and a pressure relief valve (set at 3.0, 3.5, 4.5, 5.0. 6.0 or 8.0 depending on model. All models incorporate a stainless-steel mesh and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model CWIC355040 comes supplied with a tundish. For use with copper pipe to BS EN 1057, PB pipe (with inserts) to BS EN 7291-2:2010 and PEX pipe (with inserts) to BS EN 7291-3:2010. Maximum working pressure 16.0. Maximum operating temperature of 25°C.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303016
Size:
22mm compression fittings inlet and outlet.
Marking:
RWC, SYR, DR and Flow Arrow on Valve Body. Reliance Water Controls and Pressure on Pressure Reducing Ring. SYR and Flow Arrow on Pressure Relief Valve. Reliance Water Controls and Pressure on Pressure Relief Cap.
Installation Requirements:
R001 R120
Expiry date:
31/03/2028
Model:
CWIC355025, CWIC355026, CWIC355030, CWIC355035, CWIC355040, CWIC355045, CWIC355050, CWIC355055, CWIC355060, CWIC355065, CWIC355070, CWIC355090, CWIC355200.
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2303359

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303359
Size:
½” BSP (M)
Marking:
R&T on moulded on fixed plate. Model number on adhesive label on front of lid. 6L waterline printed within cistern
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2028
Model:
G3005C MODELS ADDED IN JULY 2024 G3005CA-1 G3005CA-2 G3005CB
Product Images

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

Print This Approval


#2212097

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212097
Size:
½” BSP (M)
Marking:
VADO, WRAS & Model name on bottom of cistern, 6 Litre inside of cistern.
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
WG-095-F/C (500MM) WITH FRAME & WG-095-C (500MM) WITHOUT FRAME CISTERNS.

Approval Holder:
VADO
Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

Print This Approval


#2305327

Concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by an electronically controlled flush valve. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2305327
Size:
1/2” BSP (M).
Marking:
Cistermiser on IR sensor, Adhesive label on cistern stating Cistermiser, address, model and other tech info.
Installation Requirements:
R001 R280 R556 R581 R560
Expiry date:
31/05/2028
Model:
EasyflushEVO Cistern.
Product Images

Approval Holder:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company

Print This Approval


#2306301

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by electronic or manual actuation. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306301
Size:
½” BSP (M)
Marking:
TOTO on adhesive label on body
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2028
Model:
Neorest range: WH183EAT MB175M#SS (actuation plate) MODEL ADDED OCTOBER 2024: WH183ETNF MODEL ADDED JANUARY 2025: WH183ET HM184 (auto flush motor)
Product Images

Approval Holder:
TOTO Europe GmbH
Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

Print This Approval


#2306040

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306040
Size:
½” BSP (M)
Marking:
Bestter, Model number and Wras on Front of support bracket inside of cistern. 6 litre mark inside cistern
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
T1910 T1911
Product Images

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2306078

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306078
Size:
½” BSP (M)
Marking:
VADO, WRAS & Model number on Front cover. 6 litre mark inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
WG-095S-F/C/VADO & WG-095S-C/VADO

Approval Holder:
VADO
Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

Print This Approval


#2311060

WC flushing cistern incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2311060
Size:
1/2” BSP (M)
Marking:
Roper Rhodes logo, Model and other information on adhesive label on body, 6 Litre line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
30/11/2028
Model:
TR9006 / INST13006
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company
Manufacturer:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2301369

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301369
Size:
½” BSP (M)
Marking:
Dolphin logo on flush panel Dolphin logo, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
DB551x.E Dolphin Blue 126mm Electronic Cistern

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2111390

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111390
Size:
½” BSP (M)
Marking:
Ideal Standard on Adhesive below insert within cistern: 6L waterline within cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
R031767 Prosys 120 WC cistern Mech CL2 6L & R031867 Prosys 120 WC cistern Pneu CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2312362

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2312362
Size:
½” BSP (M).
Marking:
OLI on cistern. 6l line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/12/2028
Model:
AI103 PLUS MEC AI103 PLUS PNEU

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2212364

Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212364
Size:
½” BSP (M).
Marking:
Crosswater Logo & model code on fixed plate. 6L waterline on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/12/2027
Model:
WCF114X59R WCC51X51R without Iron Frame

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2112369

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112369
Size:
½” BSP (M)
Marking:
Ideal Standard, actuation method, product date (DD/MM/YYYY) & Ideal Standard on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L R031667 Prosys 150 WC cistern Pneu CL2 6L R042967 Prosys 150 WC cistern 820mm high Pneu CL2 6L R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2109071

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109071
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Smart Line nk Porcelanosa Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294198 100294217

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2212365

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212365
Size:
½” BSP (M).
Marking:
Crosswater X logo on flush plate. Model & 6L waterline printed within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2027
Model:
WCF114X51R & WCF114X50R WC

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#240602701

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602701
Size:
½” BSP (M)
Marking:
Ecotech logo and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
B685 B695
Product Images

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012931

BS EN 14055 (2018) concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve discharging via a type AG airgap and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. The cistern is operated by manual push button/push plate. The side entry inlet valve is mounted internally and is supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012931
Size:
½” BSP Male or 15mm push-fit.
Marking:
Dudley, TD Logo & Thomas Dudley Ltd. on inspection cover. ‘TD’, on top of outlet drop valve. ‘HYDROFLO’ on discharge cap of inlet valve. ‘DUDLEY BS 1212/4’ on nut of inlet valve.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2025
Model:
Element Cistern

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#240602715

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602715
Size:
½” BSP (M)
Marking:
WRAS & Flomasta on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products B.V
Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company

Print This Approval


#240602716

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602716
Size:
½” BSP (M)
Marking:
Flomasta & WRAS on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2111070

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111070
Size:
1/2" BSP (M)
Marking:
UNISANI, model number and 6l mark inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
BW336-F & BW336

Approval Holder:
UNISANI (XIAMEN) TECHNOLOGY CO., LTD
Company Name
UNISANI (XIAMEN) TECHNOLOGY CO., LTD
Address
Unit 1204, No.496, Xinglinwan Road, Jimei District, Xiamen
Country
China

View All Listings by this Company

Print This Approval


#2303396

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303396
Size:
½” BSP (M)
Marking:
Crosswater logo inside cistern. 6L waterline on adhesive label within cistern
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2028
Model:
WCF80X45R WCC46X39R WCF98X45R

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2112372

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112372
Size:
½” BSP (M)
Marking:
Duravit on adhesive label bon body Duravit on flush plate Duravit, date of manufacture YYYY & Model on adhesive label inside cistern 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
Durasystem range WD1034000080 WD1029000080

Approval Holder:
Duravit UK Ltd.
Company Name
Duravit UK Ltd.
Address
Unit 7 Stratus Park Brudenell Drive Brinklow Milton Keynes
Postcode
MK10 0DE

View All Listings by this Company

Print This Approval


#240602717

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602717
Size:
½” BSP (M)
Marking:
Bagnodesign, WRAS and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
BAGNODESIGN AQE-B695-D13-ESG1

Approval Holder:
BagnoDesign
Company Name
BagnoDesign
Address
Unit 1 Oakwell Park Trading Estate Birstall
Country
WF17 9LU

View All Listings by this Company

Print This Approval


#250101701

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250101701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid Flush volume inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/01/2030
Model:
Miniflo Concealed Cistern.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2212116

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212116
Size:
½” BSP (M)
Marking:
Model, WRAS & C.P HART on front cover 6 Litre inside of cistern.
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
CPHF1135 (500mm) with frame CPHSCON (500mm) without frame

Approval Holder:
C.P.Hart
Company Name
C.P.Hart
Address
Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford
Postcode
DA2 6QA
Country
United Kingdom
General Email
roy.davis@cphart.co.uk

View All Listings by this Company

Print This Approval


#2306091

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306091
Size:
½” BSP (M)
Marking:
Model, WRAS & C.P HART on front cover 6 Litre inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
CPHF825 CPHSHCON

Approval Holder:
C.P.Hart
Company Name
C.P.Hart
Address
Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford
Postcode
DA2 6QA
Country
United Kingdom
General Email
roy.davis@cphart.co.uk

View All Listings by this Company

Print This Approval


#241204725

The range of WC cisterns incorporating a BS 1212-4:2016 side entry or bottom entry float operated inlet valve providing a Type AG air gap arrangement and a flush outlet valve operated via a push button assembly for either full or reduced flush. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
241204725
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Geberit etched to flush plate Water line and volume within cistern Geberi, model and other info etchen within cistern on backplate
Installation Requirements:
R001 R280 R556 R581
Expiry date:
31/12/2029
Model:
Geberit Alpha Duofix 82cm, 98cm and 112cm Geberit Alpha Concealed Cisterns 82cm & 109cm
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#250201702

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. The supply hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250201702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection
Marking:
Front service cover is marked with Dudley logo moulding Top of outlet drop valve marked TD Front nut of inlet valve marked DUDLEY
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2030
Model:
Vantage Concealed Cistern (Category 3)

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250101702

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250101702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid TD on cap Flush volume inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/01/2030
Model:
Coalbrook Concealed Cistern.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#240602718

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602718
Size:
½” BSP (M)
Marking:
BAGNODESIGN and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
BDS-B695-D13-ESG1 concealed WC flushing cistern

Approval Holder:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012118

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012118
Size:
½” BSP (M)
Marking:
BAGNODESIGN and model number on cistern body. 6 litre line inside cistern
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
BDS-K301-A01-ESG6 UNIVERSAL FRAME 1140 SLIM CONCEALED CISTERN FOR WALL HUNG WC BDS-K301-D01-ESG4 CONCEALED CISTERN FOR BACK TO WALL WC

Approval Holder:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012119

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012119
Size:
½” BSP (M)
Marking:
BAGNODESIGN and model number on cistern. 6 litre line inside cistern
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
BDS-K133-A01-ESG6 UNIVERAL FRAMED 1120 CONCEALED CISTERN FOR WALL HUNG WC

Approval Holder:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012120

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012120
Size:
½” BSP (M)
Marking:
BAGNODESIGN and model number on cistern body. 6 litre line inside cistern
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
BDS-K210-A01-ESG6 UNIVERAL FRAMED 820 CONCEALED CISTERN FOR WALL HUNG WC BDS-K210-D03-ESG3 CONCEALED CISTERN FOR BACK TO WALL WC

Approval Holder:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#250102706

Concealed WC dual flushing cisterns with a BS 1212- 4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a manually operated dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250102706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Honjim logo and WRAS logo on cistern cover. 6 litre line inside cistern.
Installation Requirements:
R001 R556
Expiry date:
31/01/2030
Model:
G-1030
Product Images

Approval Holder:
Zhejiang Honjim Intelligent Technology Co., Ltd
Company Name
Zhejiang Honjim Intelligent Technology Co., Ltd
Address
Port-neighboring Industrial estate, Jiantiao Town, Sanmen County, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Print This Approval


#250401701

WC Cistern incorporating a side or bottom entry float operated inlet valve and a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250401701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male inlet connection.
Marking:
‘Cascade +’ or ‘Dudley Turbo’ on syphon. ‘Dudley’ and ‘TD’ on drop valve ‘HYDROFLO’.‘DUDLEY BS 1212/4’ inlet valve, Thomas Dudley Ltd on cistern. 6 litre line inside cistern
Installation Requirements:
R001 R280 R556
Expiry date:
30/04/2030
Model:
Acclaim V & Acclaim S.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.