Methven UK Limited Approvals


#2007314

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007314
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 on rear of body. DEVA on front of the body.
Installation Requirements:
R001 R090
Model:
BDG104 – Bridgewater Flexi sink mixer.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2007321

Two hole, single outlet (fixed) combination tap assembly with brass body (various finishes). Incorporating quarter turn ceramic disc headworks with single lever, dome or cross top operating members and self canceling diverter to shower outlet. The spout outlets incorporate plastic flow straighteners. This approval includes a hose, handset and wall bracket and the products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2007321
Expiry date:
31/07/2025
Size:
¾” BSP (M)
Marking:
DTC53 (brand of Methven) on rear of body.
Installation Requirements:
R001 R005 R030
Model:
DAR106
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2007336

Range of bath pillar taps with brass bodies (various finishes). Incorporating a non-rising spindle headworks with various operating members. The spout outlets incorporates a plastic flow straightener. The product is supplied with either metal or plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2007336
Expiry date:
31/07/2025
Size:
¾” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Model:
DCM102 DCM102/501 DCM SPEC102 MILAN 102 MILAN SPEC102 KEE MILAN102 EBT13102 SOLE102 D50010020 TUD02 TUD02/501 EBT2002 EBT2002501 All models are supplied with plastic backnuts excluding models: DCM SPEC102, MILAN SPEC102, KEE MILAN102
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011802

Range of two hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating ceramic disc headworks, single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose, shower handset and plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0503 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
WRAS Approval Number:
2011802
Expiry date:
30/11/2025
Size:
¾” BSP (M)
Marking:
DTC32A (brand of Methven) on rear of body. Deva on operating member.
Installation Requirements:
R001 R005 R030
Model:
ADORE106 ADORE106/501 MCL106 NIL106 LACE106 ELAN106/DM
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2012801

Range of two hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating quarter turn ceramic disc headworks with single lever, dome or cross top operating members and manual diverters to shower outlets. The spout outlets incorporate plastic flow straighteners. This approval includes a hose, handset and wall bracket and the products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012801
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R020
Model:
INS106 EXG5070 STL106 WYE106 MH INS106 MOT106
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2007340

Range of basin pillar taps with brass bodies (various finishes). Incorporating a non-rising spindle headworks with various operating members. Spout outlets incorporate a plastic flow straightener. Products are supplied with either plastic or metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2007340
Expiry date:
31/07/2025
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R005
Model:
D50010006 D50010030 DCM SPEC101 DCM101 DCM101/501 EBT13101 EBT2001 EBT2001501 KEE MILAN101 MILAN 101 MILAN SPEC101 MILAN101/FR101-4 SOLE101 TUD01 TUD01/501 VW MILAN101
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2007915

Range of shower kits consisting of a wall mounted thermostatic shower mixer with brass bodies (various finishes) incorporating a ceramic disc headworks controlling the flow, temperature is controlled via a thermostatic cartridge and single lever operating members. Supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2007915
Expiry date:
31/07/2025
Size:
15mm compression inlets.
Marking:
Methven on shower handset. Methven & DTC34 (Brand of Methven) on body.
Installation Requirements:
R001 R010 R040
Model:
AOCTSCPUK AOCTSCPWHUK AOCTSEFCP
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2006318

Range of pillar taps with brass bodies (chromium plated or gold effect finish), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporates a plastic flow straightener and the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2006318
Expiry date:
30/06/2025
Size:
See model
Marking:
DTC34 (Brand of Methven) on rear of body for GE02 & GE02/501 DTC34 (Brand of Methven) & DEVA on rear of body for RVL102
Installation Requirements:
R001 R005
Model:
Revel basin tap: RVL102 ½” BSP (M). Georgian bath tap: GE02 ¾” BSP (M), GE02/501 ¾” BSP (M).
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2003083

Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2003083
Expiry date:
31/03/2025
Note:
A torque value of 35Nm shall be applied to the nuts of model TBV008 when tightening. A torque value of 50Nm shall be applied to the nuts of model TBV010 when tightening.
Size:
See model.
Marking:
DTC 58, MODEL & flow arrow on body
Installation Requirements:
R001 R010 R040 R120
Model:
TBV008 – 15mm compression inlet/outlet. TBV010 – 22mm compression inlet/outlet.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1912072

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge or ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912072
Expiry date:
31/12/2024
Size:
Stainless steel PEX lined hose assemblies with ½” BSP captive nut end connections
Marking:
DEVA & DTC 53 ON BODY
Installation Requirements:
R001 R006 R010
Model:
SDN104 & SDN104BC combination tap assemblies Models added August 2023 SND104BB, SDN104BK & SDN104CO Modes added September 2023 VNA104
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2003387

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2003387
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC & DEVA on body.
Installation Requirements:
R001 R006 R010
Model:
SENSOR7/D
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009907

Shower kit consisting of a shower handset (chrome plated plastic), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and washers. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2009907
Expiry date:
30/09/2025
Note:
Open outlet use only.
Size:
¾” BSP(F) captive nut
Marking:
Methven & Satinjet (brand of Methven) on shower handset.
Installation Requirements:
R001 R040
Model:
WK1 MK1 EKIT04/M KK1 K1MSK EKIT05/K EKIT10/KLF KK1-LF
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009303

Range of two hole, singleoutlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non rising spindle headworks with various operating members. The spout outlets incorporate a plastic flow straightener. Products are supplied with plastic backnuts, model DCM SPEC105 is supplied with metal backnuts Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009303
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Model:
187X DCM105 VW DCM105 208.0574.212 DCM SPEC105 MILAN 105
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009306

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener . Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009306
Expiry date:
30/09/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections or 15mm copper tails.
Marking:
Deva (brand of Methven) or Methven on operating member. DTC32A (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Model:
ADORE171 ADORE171/FR113-8 ERIE171 MCL171 ADORE171M ADORE171F LACE171 SMS171 ECO-5 MH ADORE171 Model added November 2021: WWB-LACE171 Models added November 2022: DORCP SW1
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009908

Range of shower kits consisting of a deck mounted thermostatic shower mixer with brass bodies (chrome plated), incorporating a ceramic disc headworks controlling the flow with a dome type operating member and a manual diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. The spout outlet incorporates a plastic aerator. Supplied with a shower hose & shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2009908
Expiry date:
30/09/2025
Size:
¾” BSP (M)
Marking:
Methven on top of body. DTC14 (brand of Methven) & TLV106 on rear of body.
Installation Requirements:
R001 R040
Model:
TLV106WM3M & TLV106WM5M
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009909

Range of deck mounted thermostatic shower mixing valves with brass bodies (chrome plated), incorporating a ceramic disc headworks controlling the flow with a dome type operating member and a manual diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. The spout outlet incorporates a plastic aerator. Models TLVEFLF, SHTLV106/1BK, PP SHTLV106/1BK & SHTLV106/2BK are supplied with a shower hose & shower handset, riser rail & soap tray. Model TLV106 is supplied with a shower hose & shower handset. All models are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2009909
Expiry date:
30/09/2025
Note:
Methven on top of body. DTC14 (brand of Methven) & TLV106 on rear of body.
Size:
¾” BSP(M)
Installation Requirements:
R001 R020
Model:
TLV106 TLV106NK TLVEFLF SHTLV106/1BK PP SHTLV106/1BK SHTLV106/2BK SHTLV106/1B VW SHTLV106/1B KEE SHTLV106/1B
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2007322

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks with single lever, dome or cross top operating members and manual diverters to shower outlets. This approval includes a hose, handset and wall bracket and the products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2007322
Expiry date:
31/07/2025
Size:
¾” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Model:
GE03 GE03/501
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010072

Basin pillar taps (chrome plated brass) with quarter turn ceramic disc headwork and single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2010072
Expiry date:
31/10/2025
Size:
See model
Marking:
DTC 34 (brand of Methven) on rear of body. DEVA on front of body.
Installation Requirements:
R001 R006
Model:
½” BSP (M) INS101 EXG5074 INS101/FR101-4 INS101PC PP INS101 MOT101 ¾” BSP (M) INS102 EXG5075 INS102PC PP INS102 MOT102
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2107800

Range of wall mounted taps (chromium plated brass) incorporating non-rising spindle headworks with cross top operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2107800
Expiry date:
31/07/2026
Size:
½” BSP (M).
Marking:
DTC34 (brand of Methven) on body.
Installation Requirements:
R001 R040
Model:
095X 208.0574.188 SF2302CP F1071/3N 095X SINGLE COLD Model added June 2022: 095X SINGLE HOT
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2106800

Range of pillar taps (chromium plated brass) incorporating non rising spindle headworks and cross top operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2106800
Expiry date:
30/06/2026
Size:
Basin taps: ½” BSP (M), Bath taps: ¾” BSP (M).
Marking:
DTC34 (brand of Methven) on base of body.
Installation Requirements:
R001 R040
Model:
182X VW 182X
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2106801

Range of pillar taps (chromium plated brass) incorporating non rising spindle headworks and cross top operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2106801
Expiry date:
30/06/2026
Size:
Basin taps: ½” BSP (M), Bath taps: ¾” BSP (M).
Marking:
DTC34 (brand of Methven) on base of body.
Installation Requirements:
R001 R006
Model:
181X. VW 181X. 208.0560.123. F1080.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010319

Range of single hole, double outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a non-rising spindle headwork with a dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2010319
Expiry date:
31/10/2025
Size:
15mm copper tails.
Marking:
DTC32A (brand of Methven) on rear of body
Installation Requirements:
R001 R006
Model:
CMS191 CMS191/002
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010322

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010322
Expiry date:
31/10/2025
Size:
15mm copper tails.
Marking:
DTC32A (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Model:
ADORE171/EK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2107801

Wall mounted (vertical) thermostatic blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. The inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2107801
Expiry date:
31/07/2026
Note:
This approval does not include a shower hose and handset.
Size:
½” BSP (M) x ½” BSP (M)
Marking:
Deva on Body. DTC32 (brand of Methven) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
VVERT01
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2101802

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members or non-rising spindle headworks with cross top operating members (model CR26 & CR26/501). The spout outlet incorporates a plastic flow straightener (models CR26 & CR26/501 do not incorporate a flow straightener). The products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2101802
Expiry date:
31/01/2026
Size:
¾” BSP (M).
Marking:
DTC34 (brand of Methven) on rear of body (all models). Deva on operating member (model RVL108 only).
Installation Requirements:
R001 R005 R010
Model:
Lever action bath filler: DLT108 VW DLT108 Revelle deck mounted bath filler: RVL108 Georgian bath filler: GE08 GE08/501 Tudor pillar mounted bath filler: TUD08 TUD08/501 EBT2008 EBT2008501 Coronation bath filler: CR26 CR26/501
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2104800

Range of deck mounted two hole, double outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc (DLV305B, DLT305B) or rising spindle (CR305 “Bridge”, CR305/501 “Bridge” & GEO305) headworks. Models GEO305, DLT305B and DLV305B incorporate single lever type operating members. Models CR305 and CR305/501 incorporate cross top operating members. The products are supplied with plastic back nuts. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0570 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, double outlet, swivel.
WRAS Approval Number:
2104800
Expiry date:
30/04/2026
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on body.
Installation Requirements:
R001 R006
Model:
Coronation bridge sink mixer: CR305 “Bridge”. CR305/501 “Bridge” (Gold plated). Lever action bridge sink mixer: DLT305B GE0305 DLV305B
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010905

Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headworks controlling the flow, temperature is controlled via a thermostatic cartridge with dome type or cube type (model WCTS). All operating members incorporate a manual override button. Inlets incorporate approved single check valve cartridges (however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection) and stainless steel strainers. All products are supplied with a shower hose, shower handset, riser rail & soap tray. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2010905
Expiry date:
31/10/2025
Size:
15mm compression
Marking:
Methven & Satinjet (brand of Methven) on shower handset. Methven on body.
Installation Requirements:
R001 R010 R040
Model:
WCTS KCTS MCTS MCTS MH MCTS WAHPCPUK KCTSMH AOCTSFFCPUK WKCTS
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2007339

Range of click type pop-up wastes with brass bodies and EPDM rubber seals. Product is supplied with plastic back nuts.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2007339
Expiry date:
31/07/2025
Size:
1 ¼” BSP (M)
Marking:
DTC34 (brand of Methven) on body.
Installation Requirements:
R001
Model:
PTW300/017 PTW300/501 PTW300/MB PTW300/SS
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010320

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets of models SAVV2313 & SEV313 incorporate a plastic aerator, model SPA2113/EX incorporates a stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010320
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Deva on operating member (all models). Models SAVV2313 and SEV313, DTC53 (brand of Methven) on rear of body. Model SPA2113/EX, DTC52 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Model:
SAVV2313 Savvi MK2 SEV313 SPA2113/EX Sparkle MK2
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010328

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010328
Expiry date:
31/10/2025
Size:
15mm copper tails.
Marking:
DEVA on front of body. DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Model:
CONV130 Converse mono sink mixer.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010332

Range two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic (model VSN208) metal (model DAR108) backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2010332
Expiry date:
31/10/2025
Size:
¾” BSP (M).
Marking:
DTC34 (brand of Methven) on rear of body & Deva on front leg (model VSN208). DCT53 (brand of Methven) on body (model DAR108).
Installation Requirements:
R001 R005 R010
Model:
VSN208 Vision. DAR108 Darwen.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010349

Two hole, single outlet (fixed) combination tap assembly brass body(in various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The inlet to the shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose, shower handset and plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0503 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
WRAS Approval Number:
2010349
Expiry date:
31/10/2025
Size:
¾” BSP (M)
Marking:
Deva on operating member. DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
RVL106 Revelle deck mounted bath shower mixer.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2007385

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007385
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 (brand of Methven) & Methven on body.
Installation Requirements:
R001 R090
Model:
HASMCP COMBINATION TAP ASSEMBLIES
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2006365

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006365
Expiry date:
30/06/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC25 (brand of Methven) & Methven (models added August 2023) on body.
Installation Requirements:
R001 R006 R009 r010
Model:
ELSMCP, ELSMBK & MASMCP COMBINATION TAP ASSEMBLIES MODELS ADDED AUGUST 2023: INST-MCP-1HKM & INST-MCF-1HKM
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011042

Range of wall mounted shower outlets (chromium plated brass). Models ARMW02 and ARMW05 are supplied with metal backnuts. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2011042
Expiry date:
30/11/2025
Size:
½” BSP (M) or ½” BSP (F).
Marking:
DTC on face plate.
Installation Requirements:
R001 R040
Model:
SAW148, SAW320, ARMW02 & ARMW05.
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011901

Range of deck mounted, two-hole, single outlet (fixed), combination tap assemblies (chromium plated brass). The flow is controlled by quarter turn ceramic disc headwork, with dome operating members, which also diverts the flow between multiple shower outlets. The temperature is controlled by a thermostatic cartridge with dome type operating members and manual override button. The products incorporate a lockable diverter to shower outlet and the spout outlets incorporate a plastic flow straightener. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Model TLVBSM is supplied with a shower hose and shower handset. Model TLVBSM2B is supplied with a shower hose, shower handset, riser rail and soap dish. Both models are supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
2011901
Expiry date:
30/11/2025
Size:
¾” BSP (M)
Marking:
Methven on top of tap body. Methven and SatinJet on shower handset.
Installation Requirements:
R001 R010 R020
Model:
TLVBSM & TLVBSM2B
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011318

Range of wall mounted non concussive shower valves with either a concealed or exposed brass body and chrome plated trim. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
2011318
Expiry date:
30/11/2025
Size:
15mm compression
Marking:
Deva on operating member. Flow arrow on body. DTC62 on body and Dev on operating member (model NCT00340)
Installation Requirements:
R001 R040
Model:
NCT002 (exposed) NCT003 (concealed) Model added January 2021: NCT00340 (concealed)
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011330

Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members and interconnecting flexible hoses. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2011330
Expiry date:
30/11/2025
Size:
½” BSP (M).
Marking:
DTC53 (brand of Methven) on rear of body. Methven on top of spout.
Installation Requirements:
R001 R006 R010
Model:
WAI range: WAI3BFCP WAI3BFBK WAI3BFBB WAI3BFBN WAI3BFGM
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2108800

Wall mounted, bar type thermostatic shower mixers (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. Both inlets incorporate a stainless steel strainer and a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2108800
Expiry date:
31/08/2026
Size:
¾” BSP (M) reducer x 15mm compression.
Marking:
Methven on body. DTC14 (brand of methven) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
SOLBEF – SOL bar shower
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2012803

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a non-rising spindle headwork with cross top operating members and a manual diverter to shower outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012803
Expiry date:
31/12/2025
Size:
¾” Male BSP Inlets
Marking:
DTC34 (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
TUD03 (chrome plated) TUD03/501 (Gold finish)
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009317

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (gold plated brass) incorporating a non-rising spindle headwork with cross top operating members and a manual diverter to shower outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2009317
Expiry date:
30/09/2025
Size:
¾” Male BSP Inlets
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Model:
CR23 (chrome plated) CR23/501 (gold finish)
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011303

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011303
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
ABN104 Abingdon. Model added September 2023 BRG104
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011304

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). incorporating a ceramic cartridge and single lever operating member with a spring loaded, pull down trigger operated spray. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011304
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body.
Installation Requirements:
R001 R090
Model:
SPR104 – Spring. Model added September 2021: SLINKY218
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010333

Range two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever or cross top (model MOT108) operating members. The spout outlets incorporates a plastic flow straightener. The products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2010333
Expiry date:
31/10/2025
Size:
¾” BSP (M).
Marking:
DTC34 (brand of Methven) on rear of body. Deva on front leg.
Installation Requirements:
R001 R006 R010
Model:
Insignia range: INS108 EXG5071 STL108 WYE108 MOT108
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011305

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Models SM056, SM056F, SM056/501, SM056/NI & SM056/BZ incorporate ceramic cartridge headworks with single lever operating members. Models SM057 & SM057/501 incorporate non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011305
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections or 15mm copper tails.
Marking:
DTC34 (brand of Methven) on rear of body (models SM057 & SM057/501) DTC34 (brand of Methven) on rear of body and Deva on front of body (all other models).
Installation Requirements:
R001 R006 R010
Model:
Georgian flexi tails: SM056F Georgian 15mm copper tails: SM056 SM056/501 SM056/NI SM056/BZ Venetian 15mm copper tails: SM057 SM057/501
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2012331

Two-hole, singe outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a quarter turn ceramic disc headworks with single lever type operating members. The outlet incorporates a plastic flow straightener. Product is also supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2012331
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
DTC15 (brand of Methven) on rear of body. Methven on operating members.
Installation Requirements:
R001 R006 R010
Model:
KEBFCPUK – KEA bath filler.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2012910

Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headworks controlling the flow. Temperature is controlled via a thermostatic cartridge with single lever type operating members which incorporate manual override buttons. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2012910
Expiry date:
31/12/2025
Size:
15mm compression
Marking:
Methven on top of body. DTC37 (brand of Methven) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
KHCTSEFCP KLFCTSEFCP KLFCTS KRLFCTSEFLP KRCTSEFCP
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010075

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet of models SAV2113/SHD113/SEV113 incorporates plastic aerators. SPA2113 and SPA2313 incorporate a stainless steel mesh at the spout. SAVV2113, SHD113, SEV113, SPA2113, SWO2113 are supplied with a pop-up waste. Maximum working Pressure 10.0 bar. Maximum operating temperature 65ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010075
Expiry date:
31/10/2025
Note:
R160 applies to the waterfall outlets only.
Size:
Stainless Steel braided, PEX lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DEVA on operating member. DTC53 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010 R160
Model:
SAVV2113. SHD113. SEV113. SPA2113. SPA2313. SWO2113. SWO2113/EX. SWO2313. Model added May 2023: T-SAVV2313 Model added September 2023: MCA113 Model added October 2023: MCA313
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2012923

Wall mounted thermostatic mixing valves (chromium plated brass), flow is controlled via a quarter turn ceramic disc headwork with dome type operating members. The temperature is controlled by a thermostatic cartridge with dome type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2012923
Expiry date:
31/12/2025
Size:
¾” to ½” off-set unions.
Marking:
Deva on top of body. DTC37 (brand of Methven) on bottom of body.
Installation Requirements:
R001 R010 R040
Model:
VISBS – Vista bar shower with single mode kit.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2012347

PVC lined, chrome plated shower hose. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2012347
Expiry date:
31/12/2025
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
DTC15 (brand of Methven), WRAS and year of manufacture (YY) on conical nut.
Installation Requirements:
R001 R040
Model:
HOS2.0CPS03 2m chrome hose standard bore.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.