Ideal Standard (UK) Ltd Approvals


#2003701

Shower outlet with chromium plated brass body, incorporating a stainless-steel mesh strainer in the shower head connector. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2003701
Size:
½” BSP (M)
Marking:
Ideal standard logo on face of shower head.
Installation Requirements:
R001 R040
Expiry date:
31/03/2025
Model:
B9436AA – Idealrain S1 Rainshower Fixed Shower Head

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2003009

Range of plastic bodied ceramic cartridge headworks with EPDM ‘O’-rings, to be installed in specifically dimensioned bodies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C

Section:
0440 Headworks
Section Subtitle:
Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.
WRAS Approval Number:
2003009
Size:
ØD 28MM
Marking:
Ideal Standard on red ring
Installation Requirements:
R001
Expiry date:
31/03/2025
Model:
CARTRIDGE IS28 SD METAL PIVOT (A956307) CARTRIDGE IS28 SD PLASTIC PIVOT (A956308) CARTRIDGE IS28 SD PLASTIC PIVOT CLICK (A956309) CARTRIDGE IS28 SD SHORT PLASTIC PIVOT (A956310)

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2003022

Ceramic cartridge headwork with a plastic body, incorporating EPDM seals. The product is intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC

Section:
0440 Headworks
Section Subtitle:
Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.
WRAS Approval Number:
2003022
Size:
Ø38mm
Marking:
Ideal Standard on temperature limiting ring
Installation Requirements:
R001
Expiry date:
31/03/2025
Model:
A956131 Cartridge 38 SD Dry Application

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2003066

Pillar tap (chromium plated brass) incorporating a quarter turn ceramic disc headwork and cube type operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2003066
Size:
½” BSP (M)
Marking:
‘ISI’ on rear of tap body.
Installation Requirements:
R001 R006
Expiry date:
31/03/2025
Model:
B0728AA

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2003038

Thermostatic sequential cartridge headwork with NBR ‘O’-rings for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.
WRAS Approval Number:
2003038
Size:
1 ¼” BSP (M)
Marking:
ISI on Valve.
Installation Requirements:
R001
Expiry date:
31/03/2025
Model:
A956048 - ISI SEQUENTIAL Thermostatic CARTRIDGE A956156 - ISI SEQUENTIAL Thermostatic CARTRIDGE

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2004058

Two-hole, singe outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever type operating members. The outlet incorporates a plastic flow straightener. Product is also supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2004058
Size:
¾” BSP (M)
Marking:
Ideal Standard logo on operating member.
Installation Requirements:
R001 R005 R010
Expiry date:
30/04/2025
Model:
B0293AA – Opus dual control bath filler

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2005039

Non-rising spindle headwork with brass body incorporating NBR ‘O’-rings, To be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.
WRAS Approval Number:
2005039
Size:
½” BSP (M)
Marking:
Ideal Standard on body.
Installation Requirements:
R001
Expiry date:
31/05/2025
Model:
A991330 - 1/2" IS RUBBER VALVE INTERNAL HEADWORKS

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2012014

Wall mounted spout outlet incorporating brass body (chrome plated) and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2012014
Size:
½” captive nut.
Marking:
ISI on captive nut .
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
B964812AA Tubular Spout S-300 1/2 D13
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2012067

Range of single hole, single outlet, (fixed) combination tap assemblies with brass bodies (chromium plated), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator and is also supplied with an optional flow straightener. Some products are supplied with a lever type pop-up waste (see models). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012067
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 15mm compression end connections.
Marking:
Sottini on operating member (models B1048AA & B1049AA). Ideal Standard on operating member (models B0763AA & B0764AA).
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2025
Model:
B1048AA Tesino SL Basin Mixer (with pop-up waste) B1049AA Tesino SL Basin Mixer B0763AA Tempo Single Lever Basin Mixer (with pop-up waste) B0764AA Tempo Single Lever Basin Mixer
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company
Manufacturer:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2107054

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2107054
Size:
¾” BSP (M).
Marking:
Ideal standard on operating members.
Installation Requirements:
R001 R005 R010
Expiry date:
31/07/2026
Model:
BC694AA Cerafine Model D DC Bath filler, BC707AA Cerafine Model O DC BATH FILLER.
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2107055

Single hole, single outlet (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107055
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Sottini on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2026
Model:
A7261AA Ceno single lever high spout basin mixer swiveling no PUW.
Product Images

Approval Holder:
Sottini
Company Name
Sottini
Address
THE BATHROOM WORKS NATIONAL AVENUE HULL
Postcode
HU5 4HS
General Email
ukcustcare@idealstandard.com

View All Listings by this Company
Manufacturer:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2110702

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies, comprising of a concealed rough in set with a brass body and a variety of separate trim sets incorporating a ceramic cartridge headwork with a single lever operating member and a spout outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2110702
Size:
½” BSP (F)
Marking:
ISI on headwork collar
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
A5948NU - Kit 2 rough in set to be installed in conjunction with the following trim sets: A6578AA - Tesi Single lever Built in Basin mixer with 5 LPM PCA, A1350AA EDIT L Single lever Wall Mounted Basin mixer.

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2201005

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2201005
Size:
½” BSP (F) inlets (A1313NU- core valve unit)
Marking:
BD244AA CERAPLAN model: Ideal standard on operating member. All other models: Ideal standard on trim set.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2027
Model:
Concealed core valve unit ‘A1313NU Kit 1’ for use with following exposed parts: SL Basin Mixers BIN – Kit 2 A7372XX CONCA SL, A7378XX JOY SL, A7380XX JOY SL. XX denotes the finish and can be replaced with: AA: Chrome, A2: Brushed Gold, GN: Silver Storm, A5: Magnetic Grey. BD244AA CERAPLAN (Chrome).
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2201077

Ranges of overhead shower outlets with brass bodies, chrome plated plastic shower handsets, shower sets and shower kits. The shower sets comprise of a chrome plated plastic shower handset and shower hose. The shower kits comprise of a chrome plated plastic shower handset, brass wall elbow and either stainless steel interlocked, or PVC coated, shower hoses. The inlets of the shower handsets incorporate a plastic flow regulator at the inlet. Shower kits with ½” (M) inlets are also supplied with a brass wall elbow which incorporate a plastic flow regulator and an approved single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2201077
Size:
Please refer to model.
Marking:
Ideal Standard, Armitage Shanks or Sottini (all brands of Ideal Standard (UK) Ltd.) on shower handset or overhead shower outlet.
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
B9408AA Idealrain S1 shower kit with 80mm 1F handspray 600mm rail and 1.35m hose - ½” BSP (M) B9410AA Idealrain S3 shower kit with 80mm 3F handspray 600mm rail and 1.35m hose - ½” BSP (M) B9449AA Idealrain S1 shower set with 80mm 1F handspray and 1.35m hose - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B9450AA Idealrain S3 shower set with 80mm 3F handspray and 1.35m hose - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B9413AA Idealrain S1 shower kit with 100mm 1F handspray 600mm rail and 1.35 hose - ½” BSP (M) B9416AA Idealrain M3 shower kit with 100mm 3F handspray 600mm rail and 1.35 hose – ½” BSP (M) B9556AA Idealrain S3 shower kit with 80mm handspray, 900mm rail and 1.8m hose - ½” BSP (M) B9306AA Armaglide 2 - Shower kit with 1 function handset, 900mm rail and 1.75m hose - ½” BSP (M) B9307AA Armaglide 2 - Shower kit with 3 function handset, 900mm rail and 1.75m hose - ½” BSP (M) B9308AA Armaglide 2 - Shower set with 1 function handset and 1.75m hose - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9309AA Armaglide 2 - Shower set with 3 function handset and 1.75m hose - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9836AA – Idealrain Pro M3 Shower kit with 900mm rail, 3 function, 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9829AA – Idealrain Pro S1 shower kit with 600mm rail, single function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9830AA – Idealrain Pro S3 shower kit with 600mm rail, 3 function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9833AA – Idealrain Pro M1 shower kit with 600mm rail, single function,100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9834AA – Idealrain Pro M3 shower kit with 600mm rail, 3 function, 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9835AA – Idealrain Pro M1 shower kit with 900mm rail, single function 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9841AA – Idealrain Pro S1 shower kit with handspray holder, single function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9843AA – Idealrain Pro M1 shower kit with handspray holder, single function,100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9489AA Idealrain M3 shower set, 100mm handspray, hose, & hose retaining ring - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B1038AA Borbera L3 Shower Kit - ½” BSP (M) B9400AA - IDEALRAIN S1 H/SPRAY 1F CHROME 80MM – ½” BSP (M) B9401AA - IDEALRAIN S3 H/SPRAY 3F CHROME 80MM – ½” BSP (M) B9403AA - IDEALRAIN M3 H/SPRAY 3F CHROME 100MM - ½” BSP (M) B9304AA -ARMAGLIDE 2 H/SPRAY 1F CHROME 80MM – ½” BSP (M) B9305AA - ARMAGLIDE 2 H/SPRAY 3F CHROME 80MM – ½” BSP (M) B1039AA-Borbera M1 Rainshower - 1/2" BSP (F)

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2205070

Two hole, single outlet (fixed) combination tap assembly with chrome plated brass body incorporating ceramic cartridge headworks and single lever operating members. The spout incorporates a plastic flow straightener. Supplied with metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2205070
Size:
3/4ʺ BSP (M) Inlet and Outlets
Marking:
Ideal Standard logo on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2027
Model:
A7051AA CONCEPT AIR suite 2H SL BATH FILLER
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2205069

Two hole, single outlet (fixed) combination tap assembly with chrome plated brass body incorporating a ceramic cartridge headwork, single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with a shower handset, hose and metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2205069
Size:
3/4ʺ BSP (M) Inlet and Outlets
Marking:
Ideal Standard logo on operating member
Installation Requirements:
R001 R006 R030
Expiry date:
31/05/2027
Model:
A7052AA CONCEPT AIR suite 2H SL BATH & SHOWER MXR
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2206063

Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2206063
Size:
½” BSP (M)
Marking:
Ideal Standard, Model, WRAS and BS1212-4 on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/06/2027
Model:
EEM90010002, EEM83230067 & EV98067

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2103037

Side entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2103037
Size:
½” BSP (M) 3/8” BSP (M)
Marking:
Ideal Standard, WRAS, BS1212-4 and model on valve
Installation Requirements:
R001 R280 R550
Expiry date:
31/03/2026
Model:
EEM83270067, EEM83020067, EV97567, EV97667, EEM83030067 & EEM83030067

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2012111

Range of bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a plastic strainer. Maximum working pressure 10.0 Bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2012111
Size:
½” BSP (M)
Marking:
Ideal Standard, WRAS, BS1212-4 and model number on Valve
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2025
Model:
EEM90040014, EV97867, EEM90050085 EV97767 BOTTOM ENTRY FLOAT OPERATED INLET VALVES

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2212006

A range of spray handsets (chrome plated plastic bodies). The outlet incorporates a plastic aerator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2212006
Size:
½” BSP (M)
Marking:
ISI on threaded inlet.
Installation Requirements:
R001 R040
Expiry date:
31/12/2027
Model:
B952429AA B953138AA
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2211010

Range of concealed, wall mounted thermostatic blending valves (DZR brass body) with a variety of face plate finishes (see models). The products incorporate a ¼ turn ceramic disc headwork to control the flow with a dome operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2211010
Size:
½” BSP female (A1000NU) A5813XX & A6956XX are to be used with A1000NU
Marking:
Ideal Standard on face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
A1000NU – EASY-BOX UNIVERSAL BUILT-IN KIT1. A5813XX Ceratherm T100 Built-In Thermostatic 1 Outlet Shower Mixer KIT 2-EASY B, A6956XX Ceratherm C100 Built-In Thermostatic 1 Outlet Shower Mixer. XX denotes the finish, and can be replaced with any of the following: AA- Chrome, A2 - Brushed Gold, GN - Silver Storm, A5- Magnetic Grey, XG - Silk Black.

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2206068

Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2206068
Size:
½” BSP (M)
Marking:
Ideal Standard, Model number and BS1212-4 on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/06/2027
Model:
EEM90030079, EEM83250067 & EV97967 F

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2103038

Side entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2103038
Size:
½” BSP (M) Models added September 2022: 3/8” BSP (M) Models Added February 2023: 15mm Spigot connection
Marking:
Ideal Standard, model on valve. BS1212-4 and model on float
Installation Requirements:
R001 R280 R550
Expiry date:
31/03/2026
Model:
EEM83800067, SR04367 & SR04267 BS1212-4 INLET VALVES

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2201089

Ranges of shower kits comprising of a chrome plated plastic shower handset, brass wall elbow and either stainless steel interlocked, or PVC coated, shower hoses. Shower kits with ½” (M) inlets are also supplied with a brass wall elbow which incorporate a plastic flow regulator and an approved single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2201089
Size:
Please refer to model.
Marking:
Ideal Standard on shower handset.
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
BC641AA Idealrain S3 Shower Kit with 80mm 3F handspray 600mm rail and 1.35m hose - ½” BSP (M)

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2310904

Range of shower handsets, (plastic bodies – various finishes) incorporating a plastic flow regulator in the inlets.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2310904
Size:
½” BSP (M)
Marking:
Ideal standards on body.
Installation Requirements:
R001 R040
Expiry date:
31/10/2028
Model:
A957064XX - IdealRain Alu+ Handspray A957146XX - IdealRain Alu+ Handspray BD580XX - IdealRain Alu+ Handspray Finishes where XX can be RO (Rosé), XG (Silk Black), SI (Silver), AA (Chrome)

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2310907

Range of multi-function overhead shower outlets, (plastic bodies – various finishes). The inlets incorporate plastic flow restrictors and stainless-steel strainer washers.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2310907
Size:
½” BSP (F)
Marking:
Ideal Standard on face plate.
Installation Requirements:
R001 R040
Expiry date:
31/07/2028
Model:
A957065XX - IdealRain Alu+ Handspray BD581XX - IdealRain Alu+ Handspray Where XX denotes the finishes can be - RO (Rosé), XG (Silk Black), SI (Silver) & AA (Chrome)

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2309055

Range of shower handsets with (plastic bodies - various finishes). The inlets incorporate a plastic flow restrictor. Maximum operating temperature 60.0°C Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2309055
Size:
½” BSP (M)
Marking:
Ideal Standard on body
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
A7896AA A7896A2 A7896A5 A7896GN A7896XG B953144AA B953144A2 B953144A5 B953144GN B953144XG A7895AA A7896**and B953144** are 3 functions hand showers. All models have same structures and same materials in contact with water. The difference between the A7896**and B953144** is only package. The package of A7896** is colour box packing and B953144** is white box packing. “**” indicates different finishes AA: Chrome A2: Brushed gold A5: Magnetic grey GN: Silver Storm XG: Silk black A7895AA is a single function hand shower. Chrome finish.

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company
Manufacturer:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2307357

Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2307357
Size:
See models
Marking:
Ideal Standard Logo, direction of flow & CR on Body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2028
Model:
A5900AA 15mm T Pattern Thermostatic Mixing Valves A5901AA 22mm T Pattern Thermostatic Mixing Valves

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2310910

Shower kit comprising of a plastic shower handset incorporating a plastic flow restrictor, PVC lined shower hose that incorporates EPDM washers and riser rail assembly, available in various finishes.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2310910
Size:
1/2" BSP (F) Conical nuts
Marking:
Ideal Standards on the shower handset.
Installation Requirements:
R001 R040
Expiry date:
31/10/2028
Model:
BD586XX - Idealrain Alu+ Shower Set The suffice ‘XX’ denotes the finishes: XX = RO (Rose) SI (Silver) XG (Matt Black)
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2311916

Wall mounted shower kit comprising of shower hose, handset, overhead shower and a riser rail assembly incorporating a shower to shower diverter valve, (available in various finishes).

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2311916
Size:
1/2" BSP (M)
Marking:
Ideal standard on handset, overhead shower & riser rail assembly.
Installation Requirements:
R001 R040
Expiry date:
30/11/2028
Model:
BD585XX - Idealrain Alu+ Shower Diverter System

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2111390

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111390
Size:
½” BSP (M)
Marking:
Ideal Standard on Adhesive below insert within cistern: 6L waterline within cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
R031767 Prosys 120 WC cistern Mech CL2 6L & R031867 Prosys 120 WC cistern Pneu CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240102030

Single hole, single outlet (fixed) electronically controlled tap assemblies (either black finish or chromium plated brass bodies). Flow is controlled by a solenoid valve which is actuated via an infra-red sensor. The spout incorporates a stainless-steel strainer on the outlet. The product is supplied with a stainless steel braided PEX lined flexible hose assembly and a combination valve with a DZR brass body consisting of a servicing valve, a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2), a stainless-steel strainer and plastic flow regulator on the outlet. The combination valve has a compression inlet for use with copper pipe (manufactured to BS EN 1057). The tap incorporates a soap dispenser with a separate dispensing nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240102030
Size:
15mm compression (to combination valve).
Marking:
Ideal Standard on body.
Installation Requirements:
R001 R006 R007 R008 R570
Expiry date:
31/01/2029
Model:
A7512AA (chrome). A7512B3 (black finish).
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240102031

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (either black finish or chromium plated brass bodies). Flow is controlled by a solenoid valve which is actuated via an infra-red sensor. The spout incorporates a stainless-steel strainer on the outlet. The product is supplied with a stainless steel braided PEX lined flexible hose assembly and a combination valve with a DZR brass body consisting of a servicing valve, a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2), a stainless-steel strainer and plastic flow regulator on the outlet. The combination valve has a compression inlet for use with copper pipe (manufactured to BS EN 1057). The tap incorporates a soap dispenser with a separate dispensing nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240102031
Size:
15mm compression (to combination valve).
Marking:
Ideal Standard on body.
Installation Requirements:
R001 R007 R008 R040 R570
Expiry date:
31/01/2029
Model:
A7708AA (chrome). A7708B3 (black finish).
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240202011

Range of manually operated flow control angled valves with (brass bodies - various finishes), incorporating a non-rising spindle headwork with a dome type operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
240202011
Size:
½” BSP (M)
Marking:
Ideal Standard backing plate
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
BD650AA (Chrome) BD650XG (Silk Black) BD650GN (Silver Storm) BD650A2 (Brushed Gold) BD650A5 (Magnetic Grey) BD650J6 (Brushed Bronze)
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2112369

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112369
Size:
½” BSP (M)
Marking:
Ideal Standard, actuation method, product date (DD/MM/YYYY) & Ideal Standard on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L R031667 Prosys 150 WC cistern Pneu CL2 6L R042967 Prosys 150 WC cistern 820mm high Pneu CL2 6L R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240588003

Wall mounted, exposed, thermostatic bar type shower mixing valve (brass body, various finishes - see model). The product incorporates a 2-way ceramic disc diverter headwork with a single lever operating member controlling the flow to either shower outlet. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member and a manual override button. The product is supplied with a shower riser, overhead shower, shower hose and shower handset. The inlets incorporate a combined washer and stainless-steel strainer, as well as an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
240588003
Size:
15mm compression.
Marking:
Ideal Standard on shower valve body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2029
Model:
BD579XX Ceratherm Alu+ Thermostatic Shower System. Where XX denotes finish and can be replaced by: RO = Rose, SI = Silver, XG = Matt Black.

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2201106

Chrome plated plastic shower handset, shower hose. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2201106
Size:
Please refer to model.
Marking:
Armitage Shanks on shower handset.
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
BD996AA Armaglide 2 Shower Fit Single function with 80mm handset and shower hose 1350mm long - ½” BSP (M)

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240702054

Self-closing pillar tap (chromium plated brass) with spring loaded headwork and dome operating member. The spout outlet incorporates a plastic aerator. Supplied with brass backnuts. Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:
1820 Taps
Section Subtitle:
Self closing tap.
WRAS Approval Number:
240702054
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Armitage shanks on operating member.
Installation Requirements:
R001 R005
Expiry date:
31/07/2029
Model:
B8267AA – Avon 21
Product Images

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#240702055

Range of wall mounted thermostatic shower valves (chromium plated brass bodies). Flow is controlled by a quarter turn ceramic disc headwork with dome operating member and temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporate a single check valve cartridge however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
240702055
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression.
Marking:
Ideal standard on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
A7202AA Ceratherm T25. A7216AA Ceratherm T50. A7231AA Ceratherm T100.
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240702708

Range of click type pop-up wastes (brass or plastic bodies - various finishes, see model).

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240702708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1¼” BSP (M).
Marking:
ISI on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
Plastic body: S8803XX, B952298XX Brass body: E1482XX, B953262XX Where XX denotes finish and can be replace by: All models: AA = Chrome. B953262XX model only: A2 = Brushed Gold, A5 = Magnetic Grey, GN = Silver Storm, XG = Silk Black.
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240788007

Wall mounted, exposed shower valve which has a brass body, available in different finishes. Flow is controlled by a quarter turn ceramic disc headwork with dome operating member and temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporate a single check valve cartridge however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
240788007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression.
Marking:
Ideal Standard logo on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
BD578XX Ceratherm ALU+ Exposed Thermostatic Mixer Valve. ‘XX’ denotes finish and is replaced with: RO (Rose), SI (Silver) and XG (Matt Black).

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240902016

Self-closing, wall mounted bib tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlet incorporates a plastic aerator with integral flow regulator or optional flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap.
WRAS Approval Number:
240902016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
Armitage Shanks on operating member
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
S7241AA Avon 21
Product Images

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#240902033

Range of showerheads with a plastic body (various finishes - see model) and brass connections. The A7889, A7890 and A7891 models incorporate two solenoids controlling the flow to the spray plate or a central plastic aerator. The showerhead inlet also incorporates a plastic flow regulator (except for the A7889 models). Open outlet use only. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
240902033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M ½” BSP F
Marking:
Ideal standard logo on body
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
A7889AA - Chrome A7889A2 - Brushed gold A7889A5 - Magnetic Grey A7889GN - Silver Storm A7889XG - Silk Black A7885AA - Chrome A7887AA - Chrome A7888AA - Chrome A7890AA - Chrome A7891AA - Chrome A7891A2 - Brushed Gold A7891A5 - Magnetic Grey A7891GN - Silver Storm A7891XG - Silk Black A7890A2 - Brushed Gold A7890A5 - Magnetic Grey A7890GN - Silver Storm A7890XG - Silk Black
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240702078

Range of wall mounted shower outlets (chrome plated brass bodies). Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
240702078
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
VR991CP – 15mm Compression
Marking:
Intatec logo on underside of body
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
S9313AA

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#241202030

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
241202030
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.
Marking:
ISI on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2029
Model:
A6327AA
Product Images

Manufacturer:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval


#250102013

Single hole, single outlet, fixed, combination tap assembly (chromium plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
250102013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections. Supplied with 15mm compression x 3/8" BSP male inlet adapters.
Marking:
Ideal Standard on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2030
Model:
BC340AA
Product Images

Manufacturer:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.