Single hole, single outlet (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107055

Expiry date:

31/07/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Sottini on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

A7261AA Ceno single lever high spout basin mixer swiveling no PUW.

Factor:

Sottini

Company Name

Sottini

Address

THE BATHROOM WORKS NATIONAL AVENUE HULL

Postcode

HU5 4HS

General Email

ukcustcare@idealstandard.com

View All Listings by this Company

Manufacturer:

Ideal Standard Produktions - GmbH

Company Name

Ideal Standard Produktions - GmbH

Address

EUSKIRCHENER STRASSE 80 53121 BONN GERMANY

General Email

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The products are supplied with a brass ⅜” BSP (M) x 15mm compression adapter. The spout outlets incorporate a plastic aerator. The A6259AA model is supplied with pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107062

Expiry date:

31/07/2026

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Sottini on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

A6491AA - Paglia SL Small Basin Mixer with PUW, A6492AA - Paglia SL Small Basin Mixer with no PUW.

Factor:

Sottini

Company Name

Sottini

Address

THE BATHROOM WORKS NATIONAL AVENUE HULL

Postcode

HU5 4HS

General Email

ukcustcare@idealstandard.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The BC428AA and BC430AA models are supplied with a pop-up waste. The products are supplied with loose ⅜” BSP (M) x 15mm compression adaptors for installation on each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110015

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

SOTTINI on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

A7257AA. A7258AA. A7259AA. A7260AA. BC428AA. BC429AA. BC430AA.

Factor:

Sottini

Company Name

Sottini

Address

THE BATHROOM WORKS NATIONAL AVENUE HULL

Postcode

HU5 4HS

General Email

ukcustcare@idealstandard.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a ⅜” BSP (M) x 15mm compression adapter for installation on each inlet hose. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2201013

Expiry date:

31/01/2027

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Sottini logo on operating member

Installation Requirements:

R001 R006 R010

Model:

A7263AA Ceno single lever 1-hole bath filler

Manufacturer:

Sottini

Company Name

Sottini

Address

THE BATHROOM WORKS NATIONAL AVENUE HULL

Postcode

HU5 4HS

View All Listings by this Company