Intatec Limited Approvals


#2309925

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309925
Expiry date:
30/09/2028
Size:
Model IT1008CP 10mm copper tails Model IT1008FT Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Model, date of manufacture (MM/YY) on body. Inta on operating member.
Installation Requirements:
R001 R006
Model:
IT1008CP IT1008FT
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1911006

Stainless steel braided EPDM lined flexible hose assembly with EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
1911006
Expiry date:
30/11/2024
Size:
½” BSP captive nut
Marking:
Intatec logo, WRAS & year of manufacture (YYYY) on ferrule
Installation Requirements:
R001
Model:
HOSE400
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1912007

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using a dome type operating member. Temperature is controlled via a thermostatic cartridge also using a dome type operating member, also incorporating a lockable diverter to shower outlet. The inlets incorporate a stainless-steel filter and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
1912007
Expiry date:
31/12/2024
Size:
½” x ¾” BSP (M) offset union
Marking:
Intatec and date of manufacture MM/YY on rear of body
Installation Requirements:
R001 R020
Model:
920000CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1912008

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using a dome type operating member. Temperature is controlled via a thermostatic cartridge also using a dome type operating member, also incorporating a lockable diverter to shower outlet. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator and the product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
1912008
Expiry date:
31/12/2024
Size:
¾” BSP (M) 920000WDH
Marking:
Intatec and date of manufacture (MM/YY) on rear of body
Installation Requirements:
R001 R005 R010
Model:
920000WDH
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1912010

Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models ST20015CP & COOR incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1912010
Expiry date:
31/12/2024
Size:
Models ST20015CP & COOR: ½” X ¾” BSP offset unions. All other models: ¾” captive nut.
Marking:
Inta logo, model number and date of manufacture (WW/YYYY) on rear body.
Installation Requirements:
R001 R040
Model:
ST20015CP, COOR, ST20015NF, ST20015LL, IN10018CP, PU10010SP & COOR.1.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2001033

Range of plastic bodied (chrome plated) overhead shower outlets, with NBR and/or EPDM ‘O’-rings. The inlet incorporates a combined EPDM washer with a stainless steel strainer. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2001033
Expiry date:
31/01/2025
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Intatec logo on shower head nut
Installation Requirements:
R001 R040
Model:
CB0010CP. 71712CP.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2001034

T-Type thermostatic mixing valve (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2001034
Expiry date:
31/01/2025
Size:
15mm compression inlets x outlets
Marking:
Intatec logo on body.
Installation Requirements:
R001 R010 R120
Model:
60096CP 60091CP Added December 2022
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#1912062

Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models IN10015CP incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1912062
Expiry date:
31/12/2024
Size:
Models IN10015CP: ½” X ¾” BSP offset unions. All other models: ¾” captive nut.
Marking:
Intatec logo, model number and date of manufacture (WW/YYYY) on rear body.
Installation Requirements:
R001 R040
Model:
IN10015CP & IN20015CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2003035

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a nickel plated DZR brass body. Product also incorporates an isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2003035
Expiry date:
31/03/2025
Size:
15mm compression x ½” BSP (M)
Marking:
Intatec logo, CR, size and flow arrow on body.
Installation Requirements:
R001
Model:
FLDCV15X
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2004011

Wall mounted, exposed bar type thermostatic blending valve (chromium plated brass), incorporating a quarter turn ceramic disc controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2004011
Expiry date:
30/04/2025
Note:
This approval does not include a shower hose and handset.
Size:
20014CP - PLUS BAR SHOWER THERMOSTATIC BLENDING VALVES
Marking:
Intatec and 20014CP on rear of tap body.
Installation Requirements:
R001 R010 R040
Model:
20014CP - Plus Bar Shower.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2004045

Range of chrome plated plastic shower handsets with EPDM ‘O’-rings and flow restrictor. Maximum operating temperature 60ºC.

Section:
1650 Shower Outlets
WRAS Approval Number:
2004045
Expiry date:
30/04/2025
Note:
Open out use only.
Size:
½” BSP (M)
Marking:
Intatec logo on body.
Installation Requirements:
R001 R040
Model:
ED300019XX, HS1010CP, HS1007CP, HS1008CP, HS1009CP, PU900002XX & SO81659CP.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2007701

Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow to either the overhead shower or hand shower with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2007701
Expiry date:
31/07/2025
Note:
This approval does not include a shower hose and handset.
Size:
¾” captive nuts
Marking:
Inta logo, model and date of manufacture (MM/YY) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
PU20010CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006018

Non-verifiable single check valve assembly with chrome plated DZR brass body. Maximum working pressure 14.0 bar. Maximum operating temperature 85ºC.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2006018
Expiry date:
30/06/2025
Size:
15mm compression x 15mm compression.
Marking:
Intatec logo, CR and flow arrow on body
Installation Requirements:
R001
Model:
SCV15
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006019

Wall mounted exposed bar type thermostatic blending valve (chromium plated brass) with a half turn ceramic disc headwork controlling the flow and a thermostatic cartridge controlling the temperature, both with cubed type operating members incorporating manual override buttons. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006019
Expiry date:
30/06/2025
Size:
½” x ¾” BSP (M) offset unions
Marking:
Intatec, model and date of manufacture (MM/YY) on rear of body
Installation Requirements:
R001 R010 R040
Model:
ST10010CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006035

Wall mounted, thermostatic shower valve (chromium plated brass). The flow is controlled by a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled by a thermostatic cartridge with dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a stainless steel braided, PVC lined shower hose, chrome plated plastic shower handset and riser rail. The inlet of the shower handset incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006035
Expiry date:
30/06/2025
Size:
15mm compression
Marking:
Intatec logo and model on body
Installation Requirements:
R001 R010 R040
Model:
ST20010CP - Cool Touch Models added June 2021 TR20017CP - Trade-Tec Thermostatic Cool Bar Shower and Kit ST20017CP - Trade-Tec Thermostatic Cool Bar Shower and Kit ST20010PH - CoolFlow Touch Bar Shower Models added July 2024 IX100020CP - Enzo single outlet thermostatic shower with flexible riser kit and head (round) IX100025CP - Enzo deluxe single outlet safe touch thermo shower c/w flexible riser kit multi function head (round)
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006071

Wall mounted thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2) and a stainless-steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006071
Expiry date:
30/06/2025
Size:
15mm compression
Marking:
Inta on operating member. Model number and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R010 R040
Model:
PU90010CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2009315

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve activated via an infra-red sensor. The tap connects to the solenoid valve via a copper tail with a ½” BSP (F) captive nut and a fibre washer. The product is supplied with a combined TPE washer and stainless steel strainer to be installed on the inlet to the solenoid. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2009315
Expiry date:
30/09/2025
Note:
The solenoid valve is to be installed where light is excluded.
Size:
½” BSP (M) (to solenoid valve)
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006
Model:
IR120CP.1 (battery operated) & IR121CP.1 (mains operated)
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2009058

Range of spherical ball valves with single lever or T-handle operating members, brass bodies (nickel plated) and chromium plated brass ball and PTFE washers. Maximum working pressure IN90 models = 40.0 bar. IN89 models = 25.0 bar. Maximum operating temperature 85.0°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2009058
Expiry date:
30/09/2025
Size:
½” - 2” BSPT, BSPP or NPT (F). 15mm – 54mm compression.
Marking:
MOP5, CE marking, DN, size, PN and date of manufacture (MM/YY) on body. INTA, MODEL and WRAS on operating member.
Installation Requirements:
R001
Model:
IN90ATP015 - ½” FxF BSPP Brass Ball Valve c/w Blue T-Handle Operator IN90ATP020 - ¾” FxF BSPP Brass Ball Valve c/w Blue T-Handle Operator IN90ATP025 - 1” FxF BSPP Brass Ball Valve c/w Blue T-Handle Operator IN90ATP015 - ½” FxF BSPP Brass Ball Valve c/w Red T-Handle Operator IN90ATP020 - ¾” FxF BSPP Brass Ball Valve c/w Red T-Handle Operator IN90ATP025 - 1” FxF BSPP Brass Ball Valve c/w Red T-Handle Operator IN90ALGWP15 - ½” FxF BSPP Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN90ALGWP20 - ¾” FxF BSPP Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN90ALGWP25 - 1” FxF BSPP Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN90ALGWP32 - 1 ¼” FxF BSPP Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN90ALGWP40 - 1 ½” FxF BSPP Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN90ALGWP50 - 2” FxF BSPP Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN89ALC15 - CxC Brass Ball Valve c/w Blue Sleeved Lever Operator IN89ALC22 - CxC Brass Ball Valve c/w Blue Sleeved Lever Operator IN89ALC28 - CxC Brass Ball Valve c/w Blue Sleeved Lever Operator IN89ALC35 - CxC Brass Ball Valve c/w Blue Sleeved Lever Operator IN89ALC15 - CxC Brass Ball Valve c/w Red Sleeved Lever Operator IN89ALC22 - CxC Brass Ball Valve c/w Red Sleeved Lever Operator IN89ALC28 - CxC Brass Ball Valve c/w Red Sleeved Lever Operator IN89ALC35 - CxC Brass Ball Valve c/w Red Sleeved Lever Operator IN89ATC15 - CxC Brass Ball Valve c/w Blue T-Handle Operator IN89ATC22 - CxC Brass Ball Valve c/w Blue T-Handle Operator IN89ATC28 - CxC Brass Ball Valve c/w Blue T-Handle Operator IN89ATC15 - CxC Brass Ball Valve c/w Red T-Handle Operator IN89ATC22 - CxC Brass Ball Valve c/w Red T-Handle Operator IN89ALGWC15 - CxC Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN89ALGWC22 - CxC Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN89ALGWC28 - CxC Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN89ALGWC35 - CxC Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN89ALGWC42 - CxC Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve IN89ALGWC54 - CxC Combination Brass Ball Valve c/w Lever Operator & Red and Blue Sleeve
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2010004

Range of shower handsets incorporating ABS bodies (chrome plated), EPDM seals and ‘O’-rings. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2010004
Expiry date:
31/10/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Intatec logo on shower handset.
Installation Requirements:
R001 R040
Model:
Multi-functional shower handset. Models: HS711102WH - white faceplate. HS711102GR - grey faceplate.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006081

Wall mounted exposed bar type thermostatic blending valve (chromium plated brass) with a half turn ceramic disc headwork controlling the flow and a thermostatic cartridge controlling the temperature, both with cubed type operating members incorporating manual override buttons. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006081
Expiry date:
30/06/2025
Size:
½” x ¾” BSP (M) offset unions
Marking:
Intatec, model and date of manufacture (MM/YY) on rear of body
Installation Requirements:
R001 R010 R040
Model:
P6820096 THERMOSTATIC BLENDING VALVES
Approval Holder:
Nicholls & Clarke Ltd
Company Name
Nicholls & Clarke Ltd
Address
41-51 Freshwater Road Romford
Postcode
RM8 1SP

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2009342

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve activated via an infra-red sensor. The tap connects to the solenoid valve via a copper tail with a ½” BSP (F) captive nut and a fibre washer. The product is supplied with a combined TPE washer and stainless steel strainer to be installed on the inlet to the solenoid. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2009342
Expiry date:
30/09/2025
Note:
The solenoid valve is to be installed where light is excluded.
Size:
½” BSP (M) (to solenoid valve)
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006
Model:
SF2610CP (BATTERY OPERATED) & SF2611CP (MAINS OPERATED) ELECTRONICALLY CONTROLLED TAP ASSEMBLIES
Approval Holder:
Twyford Geberit Group
Company Name
Twyford Geberit Group
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Phone
01926 516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199
General Email

View All Listings by this Company

Print This Approval


#2010061

Range of flow through valves with brass bodies and EPDM ‘O’-rings, incorporating a spherical valve and a separate drain tap. The products are intended for connection prior to an expansion vessel. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2010061
Expiry date:
31/10/2025
Size:
FTV22: 22mm Compression FTV34: ¾” BSP (M).
Marking:
INTA logo and date of manufacture (MMYY) on body.
Installation Requirements:
R001 R040 R511
Model:
FTV22 - 22mm IBall Vortex Flow Through Valve. FTV34 - 3/4" IBall Vortex Flow Through Valve.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006020

Range of adjustable T type thermostatic blending valves (DZR brass) with push-fit connections for use with copper, PE-X (BS7921 Part 3: 2010) and Polybutylene (NBS7921/2) pipe. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006020
Expiry date:
30/06/2025
Size:
15mm or 22mm pushfit
Marking:
IMIX, Intatec logo and CR on body. Intamix on cap.
Installation Requirements:
R001 R010 R040
Model:
40015PF & 40022PF
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006021

Spherical valve incorporating a DZR brass body, chromium plated brass ball & single lever operating member, with push-fit connections for use with copper, PE-X (class B1) and Polybutylene (class B1) pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2006021
Expiry date:
30/06/2025
Size:
15mm pushfit
Marking:
Intatec logo, flow arrow, size and CR on body.
Installation Requirements:
R001
Model:
CBV15PF
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2009346

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve activated via an infra-red sensor. The tap connects to the solenoid valve via a copper tail with a ½” BSP (F) captive nut and a fibre washer. The product is supplied with a combined TPE washer and stainless steel strainer to be installed on the inlet to the solenoid. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2009346
Expiry date:
30/09/2025
Note:
The solenoid valve is to be installed where light is excluded.
Size:
½” BSP (M) (to solenoid valve)
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006
Model:
SCBW119 (BATTERY OPERATED) ELECTRONICALLY CONTROLLED TAP ASSEMBLIES
Approval Holder:
The Sanitaryware Company
Company Name
The Sanitaryware Company
Address
Montagu Court Kettering Venture Park Kettering Parkway
Postcode
NN15 6XR

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2011039

T-type thermostatic mixing valve with brass body, EPDM ‘O’-rings and stainless-steel strainers. The inlets incorporate stainless-steel strainers and an approved check valve cartridge verified by test (as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2011039
Expiry date:
30/11/2025
Size:
22mm compression
Marking:
Inta, model and other technical info on operating member.
Installation Requirements:
R001 R040
Model:
60007CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2011049

Range of automatic air venting valves with a brass body and a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 115°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2011049
Expiry date:
30/11/2025
Size:
Please refer to model.
Marking:
RBM, maximum temperature and pressure on top of body.
Installation Requirements:
R001 R200
Model:
AAV079103800B & AAV079203800B: ⅜” BSP (M). AAV079105000B: ½” BSP (M). AAV07911500B: 15mm compression.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)

View All Listings by this Company

Print This Approval


#2011345

Range of spherical valves with nickel platedbrass bodies, nickel plated brass balls and EDPM ‘O’-rings with a lever type operating member. Maximum working pressure 50.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2011345
Expiry date:
30/11/2025
Size:
Please refer to model.
Marking:
RBM Logo, PN rating, size and made in Italy on body
Installation Requirements:
R001
Model:
BBV08850512B – ¾” BSP (M) x ¾” BSP (M) BBV08850542R - ¾” BSP (M) x ¾” BSP (M) BBV28430512B – ¾” BSP (M) x ¾” BSP Captive nut BBV28430542R - ¾” BSP (M) x ¾” BSP Captive nut
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)

View All Listings by this Company

Print This Approval


#2011070

Range of in-line adjustable pressure reducing valves with Nickel plated DZR brass bodies and EPDM gaskets. Maximum inlet supply pressure 16.0 bar. Outlet pressure in the range of 0.5 bar to 6.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2011070
Expiry date:
30/11/2025
Size:
½” BSP (M) inlet and outlet (PRV223305090) ¾” BSP (M) inlet and outlet (PRV223307590G)
Marking:
RBM, CR, size and flow arrow on body
Installation Requirements:
R001 R120
Model:
PRV223305090.1 MxM PRV223307590G.1 MxM
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)

View All Listings by this Company

Print This Approval


#2011071

Range of in-line adjustable pressure reducing valves, with DZR brass bodies and EPDM seat washers & ‘o’ rings and stainless-steel filters. Various models supplied with pressure gauge (please see model list). Maximum inlet supply pressure 16.0 bar. Outlet pressure range: 0.8-6.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2011071
Expiry date:
30/11/2025
Size:
See Models
Marking:
CR, size & flow arrow on body. RBM on cap/operating member.
Installation Requirements:
R001 R120
Model:
PRV22331500.1 – 15mm compression (No Gauge), PRV22331510.1 – 15mm compression (With Gauge), PRV22332200.1 – 22mm compression (No Gauge), PRV22332210.1 – 22mm compression (With Gauge), PRV223305000.1 – ½” BSP (F) (No Gauge), PRV223305000G.1 – ½” BSP (F) (With Gauge), PRV223307500.1 – ¾” BSP (F) (No Gauge), PRV223307500G.1 – ¾” BSP (F) (With Gauge). PRV22332800.1 – 28mm compression (No Gauge). PRV22332810.1 – 28mm compression (With Gauge and Filter). PRV223310000.1 – 1” BSP (M) (No Gauge). PRV223310000G.1 – 1” BSP (M) (With Gauge). PRV223312500.1 – 1”1/4 BSP (M) (No Gauge). PRV223312500G.1 – 1”1/4 BSP (M) (With Gauge). PRV223315000.1 – 1”1/2 BSP (M) (No Gauge). PRV223315000G.1 – 1”1/4 BSP (M) (With Gauge). PRV223320000.1 – 2” BSP (M) (No Gauge). PRV223320000G.1 – 2” BSP (M) (With Gauge).
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)

View All Listings by this Company

Print This Approval


#2011069

Range of wall mounted, two hole, single outlet (fixed) mains electric or battery controlled tap assemblies (chromium plated brass) incorporating approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection . The flow is controlled via a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The tap is supplied with spherical valves for both hot and cold inlets. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2011069
Expiry date:
30/11/2025
Size:
½” Male BSP.
Marking:
Model number and date (WW/YY) on underside of tap. INTA on operating member.
Installation Requirements:
R001 R010 R040
Model:
Mains Operated: HTMWMMCP HTMWMMRS - Removable Spout Battery Operated: HTMWMBRS – Removable Spout HTMWMBCP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2012315

Range of spherical valves incorporating brass bodies and balls (nickel plated), EPDM rubber ‘O’-rings, PTFE seats and red or blue coloured lever type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2012315
Expiry date:
31/12/2025
Size:
¾” BSP (M) x ¾” captive nut.
Marking:
Novasfer logo and DN15 on body.
Installation Requirements:
R001
Model:
BV1227RD BV1227BL
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Novasfer
Company Name
Novasfer
Address
Via Galileo Galilei 3, 25080 Carzago Riviera BS
Postcode
Italy

View All Listings by this Company

Print This Approval


#2108700

Spherical valve incorporating a brass body (brushed chrome), chrome plated brass ball, ‘y’-patterned strainer, PTFE seats and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2108700
Expiry date:
31/08/2026
Size:
15mm compression
Marking:
Inta, flow arrow and size on body.
Installation Requirements:
R001
Model:
CBV15
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2101031

Wall mounted thermostatic bar type shower valve incorporating a ceramic cartridge headwork, with single lever operating member, which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member which incorporates a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2101031
Expiry date:
31/01/2026
Note:
Not supplied with shower hose or handset.
Size:
¾” BSP captive nut
Marking:
Intatec logo, model and date of manufacture (MM/YY) on rear of tap body. INTA on operating member.
Installation Requirements:
R001 R010 R040
Model:
PU20020CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2012353

Electronically controlled heat interface units (HIU) with twin stainless-steel plate heat exchangers providing space heating and instantaneous hot water. The cold inlet supply to the plate heat exchanger incorporates an isolation valve and a water hammer arrestor. The space heating circuit incorporates an expansion vessel and a pressure relief valve (set at 3.0 bar). The product is supplied with a filling loop assembly consisting of an elbow shaped copper pipe, isolation valve and double check valve assembly (suitable for backflow protection against fluid category 3) which incorporates an isolation valve. The cold mains inlet and the domestic hot water outlet each incorporate a brass bodied spherical valve with a butterfly handle. Maximum working pressures and operating temperatures: Primary: 16.0 bar and 90˚C. Domestic hot water (DHW): 10 bar and 65˚C. Secondary (space heating): 2.5 bar and 85˚C.

Section:
1350 Heat Exchangers
WRAS Approval Number:
2012353
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
Inta logo, address, serial number, technical & pressure information on label inside case.
Installation Requirements:
R001
Proviso:
Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Model:
HIPER2TPSZ80 HIPER2SPSW80 HIPER2SPSW80IS HIPER2SPSW80ZE
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2011100

Range of in-line adjustable pressure reducing valves, with DZR brass bodies and EPDM seat washers & ‘o’ rings and stainless-steel filters. Various models supplied with pressure gauge (please see model list). Maximum inlet supply pressure 16.0 bar. Outlet pressure range: 0.8-6.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2011100
Expiry date:
30/11/2025
Size:
See Models
Marking:
CR, size & flow arrow on body. RBM on cap/operating member.
Installation Requirements:
R001 R120
Model:
ART 670 F DN 15– ½” BSP (F) (With Gauge), ART 670 F DN 20 – ¾” BSP (F) (With Gauge). ART 670 M DN 25 – 1” BSP (M) (With Gauge). ART 670 M DN 32 – 1”1/4 BSP (M) (With Gauge). ART 670 M DN 40 – 1”1/4 BSP (M) (With Gauge). ART 670 M DN 50 – 2” BSP (M) (With Gauge).
Approval Holder:
Albion Valves (UK) Limited
Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley South Yorkshire
Postcode
S75 3LS

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2201800

Water hammer arrestor with brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2201800
Expiry date:
31/03/2026
Marking:
RBM on body
Installation Requirements:
R001
Model:
SA30720400
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)

View All Listings by this Company

Print This Approval


#2011104

Range of shower outlet with chromium plated bodies with check valves fitted at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Maximum operating temperature 70°C. Open outlet use only.

Section:
1650 Shower Outlets
WRAS Approval Number:
2011104
Expiry date:
30/11/2025
Size:
½” BSP male
Marking:
INTA LOGO ON REAR OF BODY
Installation Requirements:
R001 R040
Model:
TR00005XX SHOWER OUTLET
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2105304

Wall mounted, exposed, thermostatic bar type shower mixing valve (chromium plated brass) incorporating a 2-way ceramic disc diverter headwork with a dome type operating member, which diverts the flow between outlets. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a combined NBR washer and stainless steel strainer and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2105304
Expiry date:
31/05/2026
Note:
This approval does not include shower hose and handset or overhead shower outlet.
Size:
¾” BSP (F)
Marking:
Intatec logo and model code on body.
Installation Requirements:
R001 R010 R040
Model:
HU20020CP Models added June 2021 TR20020CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006085

Wall mounted, thermostatic shower valve (chromium plated brass). The flow is controlled by a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled by a thermostatic cartridge with dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a stainless steel braided, PVC lined shower hose, chrome plated plastic shower handset and riser rail. The inlet of the shower handset incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006085
Expiry date:
30/06/2025
Size:
15mm compression
Marking:
Intatec logo and model on body
Installation Requirements:
R001 R010 R040
Model:
S7002072 THERMOSTATIC BLENDING VALVES
Approval Holder:
Nicholls & Clarke Ltd
Company Name
Nicholls & Clarke Ltd
Address
41-51 Freshwater Road Romford
Postcode
RM8 1SP

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2106036

Range of cold-water inlet control groups with DZR brass bodies consisting of an in-line, adjustable pressure reducing valve (PRV) (adjustable in the range of 0.8 bar - 6.0 bar, but factory pre-set at 3.0 or 3.5 bar - see model), strainer and a DZR brass bodied pressure relief valve (SRV) (set at 4.75 bar or 6.0 bar - see model). Products also incorporate an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2106036
Expiry date:
30/06/2026
Size:
22mm compression
Marking:
RBM on cap. CR, size and flow arrow on body.
Installation Requirements:
R001 R120
Model:
UVGS21822200.1 - 22mm INLET 3 BAR PRV, 4.75 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822210.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UGVS21822211 - 22mm INLET 3.5 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822220.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 22mm EXPANSION VESSEL CONNECTION. UVGS21822260.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET NO VESSEL CONNECTION.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)

View All Listings by this Company

Print This Approval


#2107035

Wall mounted, bar type, thermostatic shower mixer (chromium plated brass), incorporating a ½ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The TR10032CP model is supplied with a riser rail, shower hose and handset. The TR10010CP is the valve only. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2107035
Expiry date:
31/07/2026
Size:
15mm compression
Marking:
INTA, TR10010CP and date of manufacture (MM/YY) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
TRADE-TEC RANGE: TR10032CP (VALVE AND SHOWER KIT), TR10010CP (VALVE ONLY). Model added July 2024 IX100010CP - ENZO SINGLE OUTLET THERMOSTATIC SHOWER WITH FLEXIBLE RISER KIT AND HEAD (ROUND)
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2107036

Range of wall mounted compact shower panels with push button timed flow control. The inlet incorporates a plastic flow regulator and a stainless-steel strainer. Maximum working pressure 4.0 Bar Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2107036
Expiry date:
31/07/2026
Size:
½” BSP (M)
Marking:
INTA on operating member
Installation Requirements:
R001 R040
Model:
SP9206CP & SP9207CP.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2107038

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and flow straightener. The inlet hoses have integral screwdriver operated isolation valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107038
Expiry date:
31/07/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating15mm compression end connections.
Marking:
Intatec logo, model and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R006 R010
Model:
LO980CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2107134

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and flow straightener The inlet hoses have integral screwdriver operated isolation valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107134
Expiry date:
31/07/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating15mm compression end connections.
Marking:
Intatec logo and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R006 R010
Model:
DMIXER Model added June 2024 DMIXERLF
Approval Holder:
LECICO
Company Name
LECICO
Address
2 D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD
Postcode
MK410QB

View All Listings by this Company

Print This Approval


#2201050

Range of deck mounted self-closing pillar taps (chromium plated brass), incorporating a spring-loaded headwork with a dome type operating member. The spout outlet incorporates a plastic flow straightener. During January and February 2022, the products are supplied with metal back nuts. From March 2022, the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
1820 Taps
Section Subtitle:
Self closing.
WRAS Approval Number:
2201050
Expiry date:
31/01/2027
Size:
½” BSP (M)
Marking:
NC163 CP model: inta on operating member. All other models: Intatec logo on rear of tap body.
Installation Requirements:
R001 R006
Model:
NC160 CP. NC162 CP. NC163 CP. NC167 CP. NC170 CP.
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Idral S.p.A.
Company Name
Idral S.p.A.
Address
Via Isei, 8/10 - I-28010 Gargallo (NO)
Phone
+39 0322 912017

View All Listings by this Company

Print This Approval


#2201068

A range of wall mounted self-closing shower valves (chromium plated brass), incorporating a spring loaded headwork with a dome type operating member. Model TF222CP250 is supplied with metal back nut. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2201068
Expiry date:
31/01/2027
Size:
15mm compression inlet and outlet:
Marking:
INTA on operating member
Installation Requirements:
R001 R040
Model:
TF992 CP TF99230 CP TF99730 CP TF997 CP TF222 CP 150 TF222 CP 200 TF222 CP 250
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Idral S.p.A.
Company Name
Idral S.p.A.
Address
Via Isei, 8/10 - I-28010 Gargallo (NO)
Phone
+39 0322 912017

View All Listings by this Company

Print This Approval


#2203349

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated). Incorporating quarter turn ceramic disc headworks, dome type operating members and self cancelling diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Models TL30024CP and TR30024CP are supplied with a shower riser rail, shower hose and shower handset. Maximum working pressure 5.0bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2203349
Expiry date:
31/03/2027
Size:
¾” BSP (M)
Marking:
Intatec, model and date of manufacturer (MM/YY) on body
Installation Requirements:
R001 R006 R030
Model:
TL30024CP TR30024CP TL30020CP TR30020CP Model added July 2024 IX800010CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2203350

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated). Incorporating non-rising spindle headworks, dome type operating members and lockable, self cancelling diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2203350
Expiry date:
31/03/2027
Note:
This approval does not include a shower hose and handset.
Size:
¾ x ½” BSP (M) offset unions
Marking:
Intatec, model and date of manufacturer (MM/YY) on body.
Installation Requirements:
R001
Model:
TL30010CP TR30010CP
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2205066

Range of deck mounted non concussive taps (chrome plated brass) incorporating a spring-loaded headwork operated via a single lever operating member. The outlet incorporates a flow straightener and the product is supplied with plastic backnuts. Maximum working pressure: 10.0 bar. Maximum operating temperature: 65°C.

Section:
1820 Taps
Section Subtitle:
Self closing.
WRAS Approval Number:
2205066
Expiry date:
31/05/2027
Size:
½” BSP (M)
Marking:
Intatec logo on body
Installation Requirements:
R001 R006
Model:
NC200CP.1 NC200CP5.1
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.