IDC Plumbing & Heating Technology (Beijing) Ltd Approvals


#1903076

Range of inline (1GLP014 & 1FWA014 models) or angled (1FWP141 model) screwdriver operated spherical valves with chrome plated brass bodies, brass balls and EPDM O-rings for use with copper pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1903076
Expiry date:
31/03/2024
Size:
See model.
Marking:
IDC logo: E mark (~E~ within circle), flow arrow & size on body
Installation Requirements:
R001
Model:
1GLP014: ½” x ½” push fit. 1FWA014 & 1FWP141: ½” push fit x ½” BSP (F).
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A

View All Listings by this Company

Print This Approval


#1904070

Range of brass push-fit fittings incorporating EDPM O-rings. For use with Irish copper pipe Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904070
Expiry date:
30/04/2024
Marking:
IDC logo: E mark (~E~ within circle) & size on body
Installation Requirements:
R001
Model:
Elbow fitting: 2PAB014, 2PAB021. Pushfit fiting End: 2PAD014, 2PAD021. Pushfit straight fitting: 2PAA014, 2PAA021. Pushfit Straight Pushfit x Pipe: 2PPA142. Pushfit straight reduced Fitting: 2PAA121. Pushfit Tee Fitting: 2PAC014, 2PAC021. Pushfit Tee reduced: 2PAC221, 2PAC212, 2PAC211 Max.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1904009

Range of inline spherical valves with either a butterfly handle (1WMP147 model) or a single lever (1BPA014 & 1BPA021 models), nickel plated brass bodies, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. For use with Irish copper pipe. Maximum working pressure 16.0 bar (1WMP147 model), 25.0 bar (1BPA014 & 1BPA021 models). Maximum operating temperature 85°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1904009
Expiry date:
30/04/2024
Size:
See model.
Marking:
1WMP147: IDC logo: E mark (~E~ within circle), size & flow arrow on body. 1BPA014 & 1BPA021: IDC logo: E mark (~E~ within circle), size & PN on body.
Installation Requirements:
R001
Model:
1WMP147: ½” push fit x ¾” BSP (M). 1BPA014: ½” push fit x ½” push fit. 1BPA021: ¾” push fit x ¾” push fit.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A

View All Listings by this Company

Print This Approval


#1906040

Range of spherical valves with nickel plated brass bodies, DZR Brass bodies & brass balls, PTFE seats and lever or butterfly operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100˚C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1906040
Expiry date:
30/06/2024
Size:
¼” - 2” M or F BSP.
Marking:
E logo on body.
Installation Requirements:
R001
Model:
1BVD102, 1BVD103, 1BVD104, 1BVD106, 1BVD108, 1BVD110, 1BVD112, 1BVD114. 1BVC102, 1BVC103, 1BVC104, 1BVC106, 1BVC108, 1BVC110, 1BVC112, 1BVC114. 1BVD202, 1BVD203, 1BVD204, 1BVD206, 1BVD208, 1BVD220, 1BVD222, 1BVD224. 1BVC202, 1BVC203, 1BVC204, 1BVC206, 1BVC208, 1BVC220,1BVC222, 1BVC224.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1909058

Range of combined temperature and relief valves incorporating DZR brass bodies and PTFE washers. The valve incorporates a manually operated rotational easing gear and are factory set at 7.0 bar. Maximum operating temperature 90˚C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
1909058
Expiry date:
30/09/2024
Size:
½” BSP (M) inlet and 15mm compression outlet. ¾” BSP (M) inlet and 22mm compression outlet.
Marking:
DR, flow arrow, IDC logo: E mark (~E~ within a circle) on body. Technical info including pressure and temp on cap.
Installation Requirements:
R001
Model:
PTR01215 & PTR03422
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A

View All Listings by this Company

Print This Approval


#1909078

Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass, brass or DZR brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures: M30220000P model: 40.0 bar. M30150000DZRP, M30220000DZRP, M30150000LVP, M30150000, M30150000P, & M30220000 models: 25.0 bar. All other models are 10.0 bar. Maximum working temperature 99°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1909078
Expiry date:
30/09/2024
Size:
see model
Marking:
IDC logo: E mark (~E~ within a circle) and size on valve body. Size on compression nut. The DZR models are marked 'CR'. All valve bodies have flow arrows except models: M28150300AP, M28150400AP, M28150000A, M28150000AP, M30150000DZRP, M30220000DZRP, M30150000LVP, M30150000, M30150000P, M30220000 & M30220000P.
Installation Requirements:
R001
Model:
Maximum working pressure 10.0 bar: ISO050 Straight isolation valve 14.7mm compression. ISO050P Straight isolation valve 14.7mm compression CP. M28150000 Straight isolation valve 15mm compression. M28150000P Straight isolation valve 15mm compression CP. M28220000 Straight isolation valve 22mm compression. M28220000P Straight isolation valve 22mm compression CP. M28150000DZRP Straight isolation valve 15mm compression DZR. M28220000DZRP Straight isolation valve 22mm compression DZR CP. ISO050LV Straight isolation valve 14.7mm compression with level handle. ISO050LVP Straight isolation valve 14.7mm compression with level handle CP. M28150000LV Straight isolation valve 15mm compression with level handle. M28150000LVP Straight isolation valve 15mm compression with level handle CP. M28220000LV Straight isolation valve 22mm compression with level handle. M28220000LVP Straight isolation valve 22mm compression with level handle CP. M28150000LVDZRP Straight isolation valve 15mm compression DZR with level handle CP. M28220000LVDZRP Straight isolation valve 22mm compression DZR with level handle CP. M32150300P Straight isolation valve 15mm compression x 3/8”M CP. M32150000 Straight Isolation valve 15mm compression heavy pattern. M32150000P Straight Isolation valve 15mm compression heavy pattern CP. M28150300AP Angle isolation valve 15mm compression x 3/8”M CP. M28150400AP Angle isolation valve 15mm compression x 1/2”M CP. M28150000A Angle isolation valve 15mm compression. M28150000AP Angle isolation valve 15mm compression CP. SM722050 Straight service valve 14.7mm compression x swivel 1/2”F CP. M40150400P Straight service valve 15mm compression x swivel 1/2”F CP. M40220600P Straight service valve 22mm compression x swivel 3/4”F CP. SM721050 Angle service valve 14.7mm compression x swivel 1/2”F CP. M41150400P Angle service valve 15mm compression x swivel 1/2”F CP. M32150400P Straight service valve 15mm compression x 1/2”M CP. M32220600P Straight service valve 22mm compression x 3/4”M CP WMV050S Straight washing machine valve 14.7mm compression x 3/4”M CP. MWM1506 Straight washing machine valve 15mm compression x 3/4”M CP. MWMA1506 Angle washing machine valve 15mm compression x 3/4”M CP. MWMT1506 Tee washing machine valve 15mm compression x 3/4”M CP. 1BVA3 15mm compression tee washing machine valve CP. Maximum working pressure 25.0 bar: M30150000DZRP Straight isolation valve full bore 15mm compression DZR CP. M30220000DZRP Straight isolation valve full bore 22mm compression DZR CP. M30150000LVP Straight isolation valve full bore 15mm compression with level handle CP. M30150000 Straight isolation valve full bore 15mm compression. M30150000P Straight isolation valve full bore 15mm compression CP. M30220000 Straight isolation valve full bore 22mm compression. Maximum working pressure 40.0 bar: M30220000P Straight isolation valve full bore 22mm compression CP.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1907022

Range of T-type thermostatic mixing valves (brass bodies). All models incorporate a stainless-steel strainer a single check valve in both the inlet connections (suitable for backflow protection up to fluid category 2). Models 1TMC201 and 1TMC202 incorporate isolation valves in the inlet connections. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907022
Expiry date:
31/07/2024
Size:
15mm, 21mm, 22mm & ½” compression.
Marking:
‘E’ logo on body.
Installation Requirements:
R001 R010 R040 R120
Model:
TITAN3075 TMV3, TITAN3050 TMV3, 1TMC101 TMV3, 1TMC201 TMV3, 1TMC102 TMV3 & 1TMC202 TMV3.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#1911009

In line single check valve assembly (nickel plated brass body) incorporating isolation valve with chrome plated brass ball. Maximum working pressure 10.0 bar. Maximum operating temperature 99ºC

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
1911009
Expiry date:
30/11/2024
Size:
15mm Compression x ¾” BSP (M)
Marking:
E logo, size and flow arrow on body
Installation Requirements:
R001
Model:
MWM1506DCV
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A

View All Listings by this Company

Print This Approval


#2001045

Range of lever operated spherical valves with a brass body and ball, and PTFE seats. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2001045
Expiry date:
31/01/2025
Size:
See model
Marking:
IDC Plumbing & Heating Technology (Beijing) Ltd. logo (~E~ within a circle), PN and size on body.
Installation Requirements:
R001
Model:
TBV125CC: 34mm compression, TBV150CC: 40.5mm compression, TBV200CC: 53.6mm compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2001100

Range of non-verifiable double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. The products incorporate a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2001100
Expiry date:
31/01/2025
Note:
Not for use with water injected with CO2 gas.
Size:
see model
Marking:
IDC logo: E mark (~E~ within circle), size, flow arrow and CR marking on body. EN1245-2 on compression nuts.
Installation Requirements:
R001
Model:
M37150000 - 15mm compression. M37150000P (Nickel plated) - 15mm compression. M37220000 - 22mm compression. M37280000 - 28mm compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2001053

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. The FLIS1512P and FLIS2234P models incorporate an isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2001053
Expiry date:
31/01/2025
Size:
See model
Marking:
IDC Plumbing & Heating Technology (Beijing) Ltd. logo (~E~ within a circle), WRAS, year of manufacture (YYYY) and size on crimped connector.
Installation Requirements:
R001
Model:
FLX1512P: G1/2 ×15mm push-fit (DN10). FLX1534P: G3/4 × 15mm push-fit (DN10). FLX2234P: G3/4 × 22mm push-fit (DN13). FLX1515P: 15mm push-fit × 15mm push-fit (DN10). FLX2222P: 22mm push-fit × 22mm push-fit (DN13). FLIS1512P: G1/2 × 15mm push-fit ISO valve (DN10). FLIS2234P: G3/4 × 22mm push-fit ISO valve (DN13).
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2003019

Range of brass compression fittings for use with copper pipe. The swivel straight & swivel female fittings incorporate red fibre washers. The tank connectors incorporate EPDM gaskets. Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1150 Fittings for use with Tube and Pipe
Section Subtitle:
Compression, metal, for use with copper tube - above ground use only.
WRAS Approval Number:
2003019
Expiry date:
31/03/2025
Size:
See model.
Marking:
~E~ logo and size on body.
Installation Requirements:
R001
Model:
BF range consisting of: 3 parts reducer: BF34821:3/4"x1/2", BF34831:1"x1/2" & BF34832:1"x3/4” Straight coupler C x C: BF3101:1/2", BF3102:3/4" & BF3103:1" Straight reduce coupler C x C: BF31021:3/4"x1/2", BF31032:1"x1/2" & BF31031:1"x3/4" straight coupler Mi x C: B3111:1/2"Mx1/2"C, B31112:1/2"Mx3/4"C, BF3112:3/4"Mx3/4"C, BF31121:3/4"Mx1/2"C, BF31123:3/4"Mx1"C, BF3113:1"Mx1"C & BF31132:1"Mx3/4"C straight coupler Fi x C: BF3121:1/2"Fx1/2"C, BF31212:1/2"Fx3/4"C, BF3122:3/4"Fx3/4"C, BF31221:3/4"Fx1/2"C, BF31223:3/4"Fx1"C, BF3123:1"Fx1"C & BF31232:1"Fx3/4"C Swivel: BF3141:1/2"Cx1/2"swivelF, BF3271:1/2"Cx1/2"swivel Elbow C x C: BF3151:1/2", BF3152:3/4" & BF3153:1" Reducer Elbow C x C: BF31521:3/4"x1/2", BF31532:1"x3/4" Elbow Mi x C: BF3161:1/2"Mx1/2"C, BF31612:1/2"Mx3/4"C, BF3162:3/4"Mx3/4"C, BF31621:3/4"Mx1/2"C, BF31623:3/4"Mx1"C, BF3163:1"Mx1"C & BF31632:1"Mx3/4"C Elbow Fi x C: BF3171:1/2"Fx1/2"C, BF31712:1/2"Fx3/4"C, BF3172:3/4"Fx3/4"C, BF31721:3/4"Fx1/2"C, BF31723:3/4"Fx1"C, BF3173:1"Fx1"C & BF31732:1"Fx3/4"C TEE C x C x C: BF3181:1/2", BF3182:3/4" & BF3183:1" TEE C x C x Mi: BF320222:3/4"Mx3/4"Cx3/4"C & BF320333:1"Mx1"Cx1"C Reduce TEE C x C x C: BF318112:1/2"x1/2"x3/4", BF318211:3/4"x1/2"x1/2", BF318212:3/4"x1/2"x3/4", BF318221:3/4"x3/4"x1/2", BF318223:3/4"x3/4"x1", BF318311:1"x1/2"x1/2", BF318313:1"x1/2"x 1", BF318322:1"x3/4"x3/4", BF318323:1"x3/4"x1", BF318331:1"x1"x1/2" & BF318332:1"x1"x3/4" TEE C x C x Fi: BF3301:1/2"Cx1/2"Cx1/2"F, BF3302:3/4"Cx3/4"Cx3/4"F, BF330221:3/4"Cx3/4"Cx1/2"F, BF3303:1"Cx1"Cx1"F, BF330331:1"Cx1"Cx1/2"F & BF330332:1"Cx1"Cx3/4"F COMPRESSION ADAPTOR: BF3402:3/4"M.I.xF & BF3403:1"M.I.xF Wall plate compression x Fi : BF3211:1/2"Cx1/2"F, BF3212:3/4"Cx3/4"F & BF 32112:3/4"Cx1/2"F Tank Connector: BF3501:1/2", BF3502:3/4" & BF3503:1" Stop End: BF3511:1/2", BF3512:3/4" & BF3513:1"
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A

View All Listings by this Company

Print This Approval


#2003046

Range of drain off taps with brass bodies, incorporating a non-rising spindle operating mechanism and NBR ‘O’-rings and EPDM seat washer. Maximum working pressure 10.0 Bar. Maximum operating temperature 99°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2003046
Expiry date:
31/03/2025
Size:
See model
Marking:
IDC logo: E mark (~E~ within a circle) on valve body. Size on compression nut.
Installation Requirements:
R001
Model:
Straight Drain off compression: BF1711: ½” compression x ½” compression. BF1712: ¾” compression x ¾” compression. BF1713: 1” compression x 1” compression. Elbow Drain off compression: BF4712: ¾” compression x ¾” compression. BF4713: ¾” compression x ¾” compression. Elbow Drain off Male x compression: BF8712: ¾” BSP (M) x ¾” compression. BF8713: 1” BSP (M) x ¾” compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2004001

Range of lever operated spherical valves with nickel plated brass (ART Models) or DZR brass (FFDZR) bodies, a chrome plated brass ball, PTFE seats and packing and EPDM ‘O’-rings. Maximum working pressure 16.0 Bar (ART Models) or 40.0 Bar (FFDZR models). Maximum operating temperature 100°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2004001
Expiry date:
30/04/2025
Size:
See model
Marking:
IDC logo (~E~ within a circle), DN, PN & Size on valve body Models Added October 2020: IDC logo (~E~ within a circle), DN, PN, Size. CE & CR mark on valve body
Installation Requirements:
R001
Model:
ART54FF0300P: 3” BSP (F) ART54FF0400P: 4” BSP (F) Models Added October 2020: FFDZR-0125, size: 1 1/4” BSP (F) FFDZR-0150, size: 1 1/2” BSP (F) FFDZR-0200, size: 2” BSP (F)
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2005037

Range of screw down stop valves with brass bodies (Models: M34040000, M34060000, M34080000, M34150000, M35200000, M34220000, M35250000 and M34280000) Bronze bodies (models: M34100000, M34120000, M34160000, M34350000, M34420000, M34540000, M35152000, M35152500 and M35222500) Fittings incorporate EPDM seat washers and PTFE seals. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2005037
Expiry date:
31/05/2025
Size:
½” - 2” BSP (F) 15mm - 54mm compression 15mm - 20mm compression 15mm - 25mm compression 22mm - 25mm compression
Marking:
Flow arrow, size and IDC logo (~E~) on body.
Installation Requirements:
R001
Model:
Thread stop cock M34040000 M34060000 M34080000 M34100000 M34120000 M34160000 Compression stop cock for use with copper pipe: M34150000 M35200000 M34220000 M35250000 M34280000 M34350000 M34420000 M34540000 M35152000 M35152500 M35222500
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2007329

Range of spring loaded, resilient trim, non-return valves with brass bodies. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
WRAS Approval Number:
2007329
Expiry date:
31/07/2025
Size:
See model.
Marking:
IDC logo (E), size, flow arrow and PN on Body
Installation Requirements:
R001
Model:
1CVC004N – ½” BSP (F) 1CVC006N – ¾” BSP (F) 1CVC008N – 1” BSP (F)
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2010058

Range of in-line `Y`-patterned strainers with either brass or DZR brass bodies (see model) incorporating a stainless steel mesh strainer and a PTFE washer. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C

Section:
1715 Strainers
WRAS Approval Number:
2010058
Expiry date:
31/10/2025
Size:
See model.
Marking:
IDC logo: E mark (~E~ within a circle), PN, DN, flow arrow and size on body. DZR models are also marked with the brass grade CW602N.
Installation Requirements:
R001 R120
Model:
Brass (CW617N) models: 1SYA004: ½” BSP (F). 1SYA006: ¾” BSP (F). 1SYA008: 1” BSP (F). 1SYA010: 1¼” BSP (F). 1SYA012: 1½” BSP (F). 1SYA014: 2” BSP (F). DZR Brass (CW602N) models: 1SYA104: ½” BSP (F). 1SYA106: ¾” BSP (F). 1SYA108: 1” BSP (F). 1SYA110: 1¼” BSP (F). 1SYA112: 1½” BSP (F). 1SYA114: 2” BSP (F).
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2010340

Drain off valve with brass body (chrome plated) and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2010340
Expiry date:
31/10/2025
Size:
¼” BSP (M) x 10mm Spigot.
Marking:
Edison logo (trade-mark of factor: E mark (~E~ within circle)) and on body.
Installation Requirements:
R001 R511
Model:
224358
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2012022

Range of high and low pressure diaphragm float operated valves with brass body & brass drop arm lever. The valves discharge from an up and over arrangement. Maximum working pressure 14.0 bar (model 1FVB004) or 3.0 bar (model FVB104). For cold water use only.

Section:
2080 Valves
Section Subtitle:
Float operated, diaphragm, metal.
WRAS Approval Number:
2012022
Expiry date:
31/12/2025
Size:
½” BSP Male.
Marking:
IDC - E logo. & BS1212/2 on body.
Installation Requirements:
R001
Model:
1FVB004 & 1FVB104.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A

View All Listings by this Company

Print This Approval


#2101017

Range of threaded fittings with either plain brass, nickel plated brass or chrome plated brass bodies. Maximum operating pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2101017
Expiry date:
31/01/2026
Size:
Plain brass bodies: 1/8" to 4" BSP. Nickel plated or chrome plated brass bodies: 1/8" - 1" BSP.
Marking:
‘E’ (brand of factor) & size on body.
Installation Requirements:
R001
Model:
IDC 25 range comprising of: Hexagon Nipple M x M Thread Bush Mi x Fi Flanged Blanking Nut RUNNING NIPPLE M x M SPACER NIPPLE M x M BARREL NIPPLE M x M Pipe Nipple M x M Thread Fi x Mi adaptor Thread Fi xFi Straight Reduce M x M adaptor Straight reduce M x F adaptor Straight reduce F x F adaptor Blanking cap Blanking Plug Elbow F x F adaptor Elbow reduce F x F adaptor Elbow M x M adaptor Elbow F x M adaptor Elbow F x F Wall plate TEE F x F x F TEE Reduce F x F x F Cross F x F x F x F Straight Pipe union M x F Straight Pipe union F x F Elbow Pipe union F x F
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2105024

Range of brass compression fittings for use with copper pipe (manufactured to IS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2105024
Expiry date:
31/05/2026
Size:
See model
Marking:
IDC logo: E mark (~E~ within circle) on fitting body. Size on nut.
Installation Requirements:
R001
Model:
Straight Coupling C x C: BF3104: 1¼” compression, BF3105: 1½” compression. Straight coupler M x C: BF3114: 1¼" BSP (M) x 1¼" compression, BF3115: 1½" BSP (M) x 1½" compression. Straight coupler F x C: BF3124: 1¼" BSP (F) x 1¼" compression, BF3125: 1½" BSP (F) x 1½" compression. Elbow C x C: BF3154: 1¼” compression, BF3155: 1½” compression. Elbow M x C: BF3164: 1¼" BSP (M) x 1¼" compression, BF3165: 1½" BSP (M) x 1½" compression. Elbow F x C: BF3174: 1¼" BSP (F) x 1¼" compression, BF3175: 1½" BSP (F) x 1½" compression. TEE C x C x C: BF3184: 1¼" compression, BF3185: 1½" compression. Tank Connector: BF3504: 1¼" compression, BF3505: 1½" compression. Stop End: BF3514: 1¼" compression, BF3515: 1½" compression. Blanking cap: BF3724: 1¼" compression, BF3725: 1½" compression. Blanking Plug: BF0744:1¼" compression, BF0745:1½" compression. Models added October 2021; Straight Coupling C x C: BF3106: 2” compression. Straight coupler M x C: BF3116: 2” BSP (M) X 2” compression. Straight coupler F x C: BF3126: 2" BSP (F) x 2" compression, Elbow C x C: BF3156: 2” compression. Elbow M x C: BF3166: 2" BSP (M) x 2" compression. Elbow F x C: BF3176: 2" BSP (F) x 2" compression. TEE C x C x C: BF3186: 2” compression. Tank Connector: BF3506: 2” compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#2107085

Range of gate valves with brass bodies, brass wedges and PTFE seals. The valves are operated via a non-rising spindle with a hand wheel operating member. To be used with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2107085
Expiry date:
31/07/2026
Size:
See model
Marking:
IDC logo (~E~ within a circle) and size on body.
Installation Requirements:
R001
Model:
1GVA106: ½” compression. 1GVA108: ¾” compression. 1GVA110: 1” compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2109332

Non-verifiable double check valve assemblies with DZR brass bodies (chrome plated), incorporating two spring loaded, resilient trim in-line check valve cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2109332
Expiry date:
30/09/2026
Size:
14.7mm compression.
Marking:
IDC logo (~E~ within a circle), flow arrow, CR and size etched on body
Installation Requirements:
R001
Model:
ICVB005
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou

View All Listings by this Company

Print This Approval


#2109373

Range of filling loop assemblies consisting of an in-line isolation valve, in-line double check valve assembly which also incorporates an isolation valve (suitable for back flow protection against fluid category 3) and stainless steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1015 Filling Loop
WRAS Approval Number:
2109373
Expiry date:
30/09/2026
Size:
See model
Marking:
IDC logo (~E~ within a circle), WRAS and year of manufacture (YYYY) stamped on ferrule. IDC logo, CR, size and flow arrow on check valve assembly.
Installation Requirements:
R001
Model:
1FLA002I: 14.7mm DCV x 14.7mm straight ISO, DN10 1FLA006I: 14.7mm DCV x 14.7mm straight ISO with pressure gauge, DN10 1FLA002: 15mm DCV x 15mm straight ISO, DN10 1FLA003: 15mm DCV x 15mm Tee ISO, DN10 1FLA004: 15mm DCV&ISO x 15mm straight ISO, DN10 1FLA005: 15mm DCV&ISO x 15mm Tee ISO, DN10 1FLA006: 15mm DCV x 15mm straight ISO with pressure gauge, DN10
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2110353

Range of brass, chrome plated brass or DZR brass compression fittings for use with copper pipe only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1150 Fittings for use with Tube and Pipe
Section Subtitle:
Compression, metal, for use with copper tube - above ground use only.
WRAS Approval Number:
2110353
Expiry date:
31/10/2026
Size:
6mm -54mm
Marking:
IDC Plumbing & Heating Technology (Beijing) Ltd logo (E), CR and size on body.
Installation Requirements:
R001
Model:
CXC Straight Coupling: 21199001 6mm 21100005 8mm 21100009 10mm 21100013 12mm 21100017 15mm 21100021 22mm 21100025 28mm 21100029 35mm 21100033 42mm 21100037 54mm C x C reduced coupling: 21109102 10mmx8mm 21109109 15mmx8mm 21109116 15mmx10mm 21109123 15mmx12mm 21109130 22mmx15mm 21109137 28mmx15mm 21109144 28mmx22mm 21109151 35mmx28mm CxC Burst Pipe Connector: 21101003 15mmx80mm 21101007 22mmx80mm 21140548 22mmx100mm CxF Adaptor: 21199011 6mmx1/4" (F) 21121113 8mmx1/4" (F) 21199012 8mmx3/8" (F) 21121127 10mmx1/4" (F) 21121134 10mmx3/8" (F) 21121141 10mmx1/2" (F) 21121155 15mmx1/4" (F) 21121162 15mmx3/8" (F) 21121169 15mmx1/2" (F) 21121176 15mmx3/4" (F) 21121183 22mmx1/2" (F) 21121190 22mmx3/4" (F) 21121197 22mmx1" (F) 21121104 28mmx1" (F) 21121118 35mmx11/4" (F) 21121125 42mmx11/2" (F) 21121132 54mmx2" (F) CxM Adaptor 21199007 6mmx1/4" (M) 21115011 8mmx1/4" (M) 21115018 8mmx3/8" (M) 21199006 8mmx1/2" (M) 21115032 10mmx1/4" (M) 21115039 10mmx3/8" (M) 21115046 10mmx1/2" (M) 21199008 12mmx1/4" (M) 21115074 15mmx1/4" (M) 21115081 15mmx3/8" (M) 21118304 15mmx1/2" (M) 21118318 15mmx3/4" (M) 21199009 22mmx1/2" (M) 21118332 22mmx3/4" (M) 21118346 22mmx1" (M) 21118353 28mmx3/4" (M) 21118360 28mmx1" (M) 21118374 35mmx11/4" (M) 21118381 42mmx11/2" (M) 21118388 54mmx2" (M) CxM Taper Adaptor: 21115011T 8mm x1/4" (M) 21115018T 8mm x3/8" (M) 21115032T 10mm x1/4" (M) 21115039T 10mm x3/8" (M) 21115046T 10mm x1/2" (M) 21115074T 15mm x1/4" (M) 21115081T 15mm x3/8" (M) 21115088T 15mm x1/2" (M) 21115095T 15mm x3/4" (M) 21115332T 22mm X 3/4" (M) 21115360T 28mm X 1" (M) 21115374T 35mm X 11/4" (M) 21115381T 42mm X 11/2" (M) 21115388T 54mm X 2" (M) Tank Connector: 21171019 15mm 21171026 22mm 21171033 28mm 21171040 35mm 21171047 42mm 21171054 54mm CxC 90 Elbow: 21124216 8mm 21124211 10mm 21124217 12mm 21124211 15mm 21124224 22mm 21124231 28mm 21124238 35mm 21124245 42mm 21124252 54mm CxC Reduced Elbow: 21199016 22mmx15mm CxM Elbow (M): 21145114 8mmx1/4" 21145121 10mmx1/4" 21145128 10mmx3/8" 21146236 10mmx1/2" 21199018 15mmx1/4" 21146243 15mmx1/2" 21146250 15mmx3/4" 21199019 22mmx1/2" 21146257 22mmx3/4" 21146264 22mmx1" 21146271 28mmx1" 21146278 35mmx11/4" 21146285 42mmx11/2" 21146292 54mmx2" 21145121T 10mm x 1/4" 21145128T 10mm x 3/8" 21145243T 15mmx1/2" 21145257T 22mmx3/4" 21145271T 28mmx1" 21145278T 35mmx11/4" 21145285T 42mmx11/2" 21145292T 54mmx2" CxF Elbow (F) 21148101 8mmx1/4" 21148105 10mmx1/4" 21148112 10mmx3/8" 21199020 10mmx1/2" 21148140 15mmx1/2" 21148147 15mmx3/4" 21148154 22mmx1/2" 21148161 22mmx3/4" 21148168 22mmx1" 21148175 28mmx1" 21148182 35mmx11/4" 21148189 42mmx11/2" 21148202 54mmx2" CxF wallplate Elbow: 21142327 15mmx1/2" 21199017 22mmx1/2" 21142341 22mmx3/4" CxCxC Equal Tee: 21199022 6mm 21151308 8mm 21151315 10mm 21199023 12mm 21151329 15mm 21151336 22mm 21151343 28mm 21151350 35mm 21151357 42mm 21151364 54mm CxCxC reduced Tee: 21153243 15mmx15mmx22mm 21153261 22mmx15mmx15mm 21153279 22mmx15mmx22mm 21153297 22mmx22mmx15mm 21153315 22mmx22mmx28mm 21153333 28mmx15mmx28mm 21153351 28mmx22mmx22mm 21153369 28mmx28mmx15mm 21153405 28mmx28mmx22mm 21153459 35mmx35mmx15mm 21153477 35mmx35mmx22mm 21153495 35mmx35mmx28mm CxCxF Reducer Tee: 21199029 15mmx1/2"x15mm 21199031 22mmx3/4"x22mm 21153531 15mmx15mmx1/2" 21153549 22mmx22mmx1/2" 21199027 22mmx22mmx3/4" 21153650 22mmx1/2"x22mm C Stop End: 21163377 8mm 21163384 10mm 21163391 12mm 21163398 15mm 21163405 22mm 21163412 28mm 21163419 35mm 21163426 42mm 21163433 54mm Swivel straight coupler (F): 21165223 15mmx1/2" copper x swivel 21165230 15mmx3/4" copper x swivel 21165237 22mmx3/4" copper x swivel Swivel elbow (F) 21165244 15mmx1/2"copper x swivel 21199032 22mmx3/4"copper x swivel Blank compression nut: 21150067 15" 21150068 22MM 21150069 28MM 21150070 35MM 21150071 42MM 21150072 54MM Internal 3 piece ccompression reducer: 21181693 10x 6mm 21181700 10x 8mm 21117641 15x 8mm 21124297 15x 10mm 21181721 15x12mm 21124296 22x 15mm 21181601 28x 15mm 21181605 28x 22mm 21181602 35x 22mm 21181763 35x28mm 21181784 42x28mm 21181819 54x35mm 21181805 54x22mm Reducing Set (1 part) internal compression reducer: 21081657 15mm x 8mm 21081658 15mm x 10mm 21081665 15mm x 12mm 21081672 22mm x 15mm 21081679 28mm x 15mm 21081686 28mm x 22mm Compression blanking disc: 21180511 6mm 21180513 8mm 21180517 10mm 21180521 15mm 21180525 22mm 21180529 28mm 21180533 35mm 21180537 42mm 21180541 54mm CXC Straight Coupling: 21240408 8mm 21240419 10mm 21240430 15mm 21240441 22mm 21240452 28mm 21240463 35mm 21240474 42mm 21240485 54mm C x C reduced coupling: 21240496 115X8mm 21240504 15X10mm 21240515 15X12mm 21240526 22X15mm 21240537 28X22mm CxC Pipe Connector: 21240003 15mmx80mm 21240007 22mmx80mm 21240548 22mmx100mm CxF Adaptor: 21240847 10mm X 3/8" 21240858 15mm X 3/8" 21240869 15mm X 1/2" 21240880 15mm X 3/4" 21240891 22mm X 1/2" 21240910 22mm X 3/4" 21240921 22mm X 1" 21240932 28mm X 3/4" 21240943 28mm X 1" 21240954 28mm X 11/4" 21240965 35mm X 11/4" 21240976 42mm X 11/2" 21240987 54mm X 2" Short CXF Adaptor: 21241015 15mm X 1/2" 21241026 15mm X 3/4" 21241037 22MMX 3/4" CxM Adaptor: 21240570 8mm X1/4" 21240573 8mm X3/8" 21240581 8mm X 1/2" 21240592 10mm X 1/4" 21240600 10mm X 3/8" 21240611 10mm X 1/2" 21240112 12mm X 1/4" 21240212 15mm X 1/4" 21240633 15mm X 3/8" 21240644 15mm X 1/2" 21240655 15mm X 3/4" 21240666 22mm X 1/2" 21240677 22mm X 3/4" 21240688 22mm X 1" 21240699 28MMX3/4" 21240707 28mm X 1" 21240718 28mm X11/4" 21240729 35mm X 1" 21240740 35mm X 11/4" 21240751 42mm X 11/2" 21240773 54mm X 2" 21215011T 8mm x1/4" 21215018T 8mm x3/8" 21215032T 10mm x1/4" 21215039T 10mm x3/8" 21215046T 10mm x1/2" 21215074T 15mm x1/4" 21215081T 15mm x3/8" 21215088T 15mm x1/2" 21215095T 15mm x3/4" 21215332T 22mm X 3/4" 21215360T 28mm X 1" 21215374T 35mm X 11/4" 21215381T 42mm X 11/2" 21215388T 54mm X 2" Tank Connector: 21241048 15mm 21241059 22mm 21241070 28mm 21241081 35mm 21241092 42mm 21241100 54mm CxC Reduced Elbow: 21225401 22mmx15mm CxM Elbow: 21241251 8mm X 1/4" 21241262 15mm X 1/2" 21241263 15mm X 3/4" 21241271 22mm X 1/2" 21241273 22mm X 3/4" 21241280 22mm X 1" 21241284 28mm X 1" 21241295 35mm X 11/4" 21241303 42mm X 11/2" 21241314 54mm X 2" CxF Elbow: 21241325 15mm X 1/2" 21241326 15mm X 3/4" 21241336 22mm X 3/4" 21241345 22mm X 1" 21241347 28mm X 1" 21241358 35mm X 11/4" 21241369 42mm X 11/2" 21241380 54mm X 2" CxF wallplate Elbow: 21241410 15mm X 1/2" 21241421 22mm X 3/4" CxCxC tee: 21241443 15mm 21241454 22mm 21241465 28mm 21241476 35mm 21241487 42mm 21241498 54mm CxCxC reduced Tee: 21241393 15mmX15mmX22mm 21241444 22mmX15mmX15mm 21241477 22mmX15mmX22mm 21241506 22mmX22mmX15mm 21241509 22mmX22mmX28mm 21241511 28mmX15mmX28mm 21241515 28mmX22mmX22mm 21241517 28mmX28mmX15mm 21241528 28mmX28mmX22mm 21241539 35mmX35mmX15mm 21241550 35mmX35mmX22mm 21241561 35mmX35mmX28mm 21241572 42mmX42mmX15mm 21241583 42mmX42mmX22mm 21241594 42mmX42mmX28mm 21241602 54mmX54mmX15mm 21241613 54mmX54mmX28mm CxCxF Tee: 21241624 15mm X 15mm X 1/2" 21241635 22mm X 22mm X 1/2" 21241646 22mm X 22mm X 3/4" 21241657 28mm X 28mm X 1/2" 21241658 28mm X 28mm X 3/4" 21241668 28mm X 28mm X 1" C Stop End: 21241111 15mm 21241122 22mm 21241133 28mm 21241144 35mm 21241155 42mm 21241166 54mm Swivel Straight : 21265223 15mmx1/2" 21265230 15mmx3/4" 21265237 22mmx3/4" Swivel elbow: 21265244 15mmx1/2" 21299032 22mmx3/4" Extended STRAIGHT COUPLING: 21240784 15mm X 1/2" 21240795 22mm X 3/4" 21240803 28mm X 1" 21240814 35mm X 11/4" 21240825 42mm X 11/2" 21240836 54mm X 2" Blank nut: 21240079 15mm 21240090 22mm 21240109 28mm 21240110 35mm 21240117 42mm 21240124 54mm 3 PIECE Reducer DZR: 21240205 15 X 8mm 21240216 15X10mm 21240227 15 X 12mm 21240238 22 X 15mm 21240249 28 X 15mm 21240260 28 X 22mm 21240271 35 X 15mm 21240282 35 X 22mm 21240293 35 X 28mm 21240301 42 X 15mm 21240312 42 X 22mm 21240323 42 X 28mm 21240334 42 X 35mm 21240345 54 X 15mm 21240356 54 X 22mm 21240367 54 X 28mm 21240378 54 X 35mm 21240389 54 X 42mm Reducing Set (1 part) DZR: 21253069 15mm x 8mm 21254294 10mm x 8mm 21250051 15mm x 10mm 21250100 22mm x 15mm 21250101 28mm x 15mm 21250102 28mm x 22mm CXC Straight Coupling: 21300000 6mm 21300001 8mm 21300005 10mm 21300009 12mm 21300013 15mm 21300017 22mm 21300021 28mm 21300025 35mm 21300029 42mm 21300033 54mm CxC reduced coupling: 21309001 15mmx8mm 21309005 15mmx10mm 21309009 15mmx12mm 21309013 22mmx15mm CxF Adaptor: 21321201 15mmx1/2" 21321205 15mmx3/4" 21321209 22mmx3/4" 21321213 22mmx1" 21321217 28mmx1" 21321221 35mmx1.1/4" CxM Adaptor: 21318106 15mmx3/8" 21318110 15mmx1/2" 21318114 15mmx3/4"E 21318118 22mmx3/4" 21318122 22mmx1" 21318129 28MMx3/4“ 21318130 28mmx1" 21318134 35mmx11/4" CxC Elbow: 21324303 8mm 90deg 21324306 10mm 90deg 21324309 12mm 90deg 21324312 15mm 21324315 22mm 21324318 28mm 21324319 35mm 90deg 21324320 42mm 90deg 21324321 54mm 90deg CxC Reduced Elbow: 21325401 22mmx15mm CxM Elbow: 21346401 15mmx1/2 21346405 22mmx3/4" 21346409 22mmx1" 21346413 28mmx1" CxF Elbow: 21349502 15mmx1/2 21349505 22mmx3/4" 21349508 22mmx1" 21349511 28mmx1" CxF wallplate Elbow: 21342601 15mmx1/2" 21342602 15mmx3/4" 21342605 22mmx3/4" 24042609 15mm x 1/2"x3/4" CxCxC tee: 21351701 12mmTeeEqual 21351705 15mmTeeEqual 21351709 22mmTeeEqual 21351713 28mmTeeEqual 21351717 35mmTeeEqual 21351721 42mmTeeEqual 21351725 54mmTeeEqual CxCxC reduced Tee: 21353802 15mmx15mmx22mm 21353805 22mmx15mmx15mm 21353808 22mmx15mmx22mm 21353811 22mmx22mmx15mm 21353814 22mmx22mmx28mm 21353817 28mmx15mmx28mm 21353820 28mmx28mmx15mm CxCxF Tee: 21353829 15mmx1/2"x15mm 21353823 15mmx15mmx1/2" 21353826 22mmx22mmx1/2" C Stop End: 21363901 15mm 21363905 22mm 21363909 28mm 21363913 35mm 21363917 42mm 21351725 54mm Swivel Straight: 21365002 15mmx1/2" 21365005 22mmx3/4" Swivel elbow: 21365008 15mmx1/2" 21399504 22mmx3/4" 3 PIECE Reducer: 21381105 22mm x 15mm 21381107 28mm x 15mm 21381109 28mm x 22mm CXC Straight Coupling: 24601015 15mm 24601022 22mm 24601028 28mm CxC reduced coupling: 24601222 22mm x 15mm CxF Adaptor: 24602152 15mm x 1/2" 24602223 22mm x 3/4" 24602224 22mm x 1" 24602284 28mm x 1" CxM Adaptor: 24603152 15mm x 1/2" 24603153 15mm x 3/4" 24603223 22mm x 3/4" 24603224 22mm x 1" 24603284 28mm x 1" Tank Connector: 24605015 15mm 24605022 22mm CxC Elbow: 24612015 15mm 24612022 22mm 24612028 28mm CxM Elbow: 24613152 15mm x 1/2" 24613223 22mm x 3/4" 24613224 22mm x 1" 24613284 28mm x 1" CxF Elbow: 24614152 15mm x 1/2" 24614223 22mm x 3/4" CxF wallplate Elbow: 24615152 15mm x 1/2" CxCxC tee: 24624015 15mm 24624022 22mm CxCxC reduced Tee: 24624221 22mm x 22mm x 15mm C Stop End: 24661015 15mm 24661022 22mm 24661028 28mm Brass olive: 200FBL06 6mm 200FBL08 8mm 200FBL10 10mm 200FBL12 12mm 200FBL15 15mm 200FBL22 22mm 200FBL28 28mm 200FBL35 35mm 200FBL42 42mm 200FBL54 54mm Copper olive: 200FCE06 6mm 200FCE08 8mm 200FCE10 10mm 200FCE12 12mm 200FCE15 15mm 200FCE22 22mm 200FCE28 28mm 200FCE35 35mm 200FCE42 42mm 200FCE54 54mm
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#2109023

Range of piston type float operated inlet valves with brass bodies. The valves discharge from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure: 3.0 (1FVA106 & 1FVA104 models only) or 14.0 Bar (all other models) Cold water use only.

Section:
2120 Valves
Section Subtitle:
Float operated, piston type, metal body.
WRAS Approval Number:
2109023
Expiry date:
30/09/2026
Note:
No float supplied.
Size:
Please refer to models.
Marking:
1FVA106, 1FVA012 & 1FVA014: BS1212/1 on body. IDC logo (E) on valve body. 1FVA004, 1FVA008 & 1FVA104: IDC logo (E) on valve body. Models added July 2022: IDC Logo "E", BS1212-1 and size on body - 1FVA006: ¾” BSP (M) Inlet Shank 2” or 4” IDC Logo "E" and size on body - 1FVA010: 1 ¼” (M)
Installation Requirements:
R001
Model:
1FVA004: 1/2” BSP (M) – Inlet Shank: 2” or 3” 1FVA106: 3/4" (M) - Inlet Shank: 2”, 3” or 4" 1FVA008: 1” BSP (M) 1FVA012: 1 ½” BSP (M) 1FVA014: 2” BSP (M) 1FVA104: 1/2” BSP (M) – Inlet Shank: 2” or 3” Models added July 2022: 1FVA006: ¾” BSP (M) Inlet Shank 2” or 4” 1FVA010: 1 ¼” (M)
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2110010

Range of pressfit connection spherical valves incorporating DZR brass bodies, PTFE seat and packing, NBR ‘O’-rings and various operating members: lever, lever lockable, T-handle and butterfly. For use with copper pipe (manufactured to BS EN 1057), stainless steel pipe (manufactured to BS EN 10312) and carbon steel pipe (ISO 4200 Groupe 1 Series 3). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2110010
Expiry date:
31/10/2026
Size:
See model.
Marking:
IDC logo: E mark (~E~ within circle), DN, PN, CR and size on valve body.
Installation Requirements:
R001
Model:
2BRMd04: 15mm x 15mm. 2BRMd06: 22mm x 22mm. 2BRMd08: 28mm x 28mm. 2BRMd10: 35mm x 35mm. 2BRMd12: 42mm x 42mm. 2BRMd14: 54mm x 54mm.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2205700

Range of gate valves incorporating brass bodies, NBR, PTFE and fibre seals. For use with copper pipe (EN 1057) Maximum working pressure 16.0 bar. Maximum working temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2205700
Expiry date:
31/05/2027
Size:
See models
Marking:
IDC logo (E) & size on body and nut
Installation Requirements:
R001
Model:
1PVB008: 22mm compression x 1 1/2" BSP captive nut, 1PVB010: 28mm compression x 1 1/2" BSP captive nut, 1PVB007: 3/4" (21mm) compression x 1 1/2" BSP captive nut, 1PVB009: 1" (27.4mm) compression x 1 1/2" BSP captive nut.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2203003

A range of screwdriver operated spherical valves with brass bodies and brass ball, EDPM ‘O’-rings and fibre washers. Maximum working pressure 16.0 bar, Maximum working temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2203003
Expiry date:
31/03/2027
Note:
For use with copper pipe manufactured to EN 1057
Size:
see models
Marking:
IDC logo (E in a circle) and size on body Size on compression nut
Installation Requirements:
R001
Model:
1PVA008: 22mm compression x 1 ½” BSP (F) 1PVA007: 21mm compression x 1 ½” BSP (F) 1PVA009: 27.4mm compression x 1 ½” BSP (F) Models added June 2022 1PVA010: 28mm Compression x 1 ½” BSP (F)
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2204706

Range of lock shield or handwheel operated gate valves with brass bodies, gate & PTFE seals, for use with copper tube manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2204706
Expiry date:
30/04/2027
Size:
see model
Marking:
Size & IDC logo (E in a circle) on body. Size & EN 1254-2 on compression nut.
Installation Requirements:
R001
Model:
Gate valve light pattern C x C models: 1GVB006 – 15MM 1GVB008 – 22MM 1GVB010 – 28MM Lock shield Gate valve light pattern C x C models: 1GVB006L – 15MM 1GVB008L – 22MM 1GVB010L – 28MM
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2211700

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2211700
Expiry date:
30/11/2027
Size:
see model
Marking:
IDC Fluid Control logo (E), WRAS and year of manufacture on crimp connection
Installation Requirements:
R001
Model:
½“ compression x ½" (F) BSP captive nut: SCFA551 - DN10 SCFA553 - DN13 SCFC558 - DN8 SCFC553 - DN13 ¾“ compression x ¾" (F) BSP captive nut: SCFA773 - DN13 SCFC773 - DN13 SCFC779 - DN19
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2201061

Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. The 1BCB001 & 1BCB701 models incorporate two approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
2201061
Expiry date:
31/01/2027
Size:
½” BSP (M).
Marking:
1BCA001: BS1010-2, IDC ‘E’ Logo and size on body. 1BCB001: BS1010, BS6282, IDC ‘E’ logo, CR and size on body. 1BCB701: BS1010, BS6282, IDC ‘E’ logo and size on body.
Installation Requirements:
R001 R040
Model:
Brass body: 1BCA001, 1BCB701. DZR brass body: 1BCB001.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2209021

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209021
Expiry date:
30/09/2027
Marking:
IDC logo (~E~ within a circle), size, PN, flow arrow and CR on body
Installation Requirements:
R001
Model:
ACV0030501 ½” BSP (F) inlet/outlet ACV0030402 ¾” BSP (F) inlet/outlet ACV0030701 1” BSP (F) inlet/outlet ACV0030601 1.1/4" BSP (F) inlet/outlet ACV0030801 1½” BSP (F) inlet/outlet ACV0030901 2” BSP (F) inlet/outlet
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2212002

Spherical valve (lever operated) with a DZR brass body, brass ball and PTFE seat. The second outlet incorporates two approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). There is a test port located between the check valve cartridges. For use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2212002
Expiry date:
31/12/2027
Size:
15mm compression inlet x 1/2" BSP captive nut outlet x 1/2" BSP male outlet
Marking:
IDC “E” logo, PN, CR, flow arrow on body and EN1254-2 and size on compression nut.
Installation Requirements:
R001
Model:
2BEH0111
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
Zhejiang IDC Fluid Control Co Ltd
Company Name
Zhejiang IDC Fluid Control Co Ltd
Address
Machinery Industrial Park Zhugang Town Yuhuan County

View All Listings by this Company

Print This Approval


#2304033

Range of non-verifiable single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2304033
Expiry date:
30/04/2028
Size:
See Models
Marking:
IDC “E” logo. PN, Size, CR and flow arrow on body
Installation Requirements:
R001
Model:
ACV0040101 (1/2” BSP (F)), ACV0040201 (3/4” BSP (F)), ACV0040301 (1” BSP (F)), ACV0040401 (1.1/4” BSP (F)), ACV0040501 (1.1/2” BSP (F)), ACV0040601 (2” BSP (F))
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#2304076

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2304076
Expiry date:
30/04/2028
Size:
See Models
Marking:
IDC E Mark (~E~ inside a circle), CR and size on body (DZR Brass Models) IDC E Mark (~E~ inside a circle) and size on body (Brass Models)
Installation Requirements:
R001 R511
Model:
DZR Brass Models: 1DCAa001 (15mm Spigot) 1DCAa001L (15mm Spigot) 1DCAa101 (1/2” BSP (M)) 1DCAa102 (3/4” BSP (M)) Brass Models (can be chrome plated or not): 1DCA001 (15mm Spigot) 1DCA001L (15mm Spigot) 1DCA001LNP (15mm Spigot) 1DCA101 (1/2” BSP (M)) 1DCA102 (3/4” BSP (M))
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2309504

'TFM1700'. White coloured, injection moulded PTFE ring. For use with water up to 85°C.

Section:
5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:
Components.
WRAS Approval Number:
2309504
Expiry date:
30/09/2028
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#2312011

Range of press fit screw down stop valves with brass bodies incorporating EPDM seat washers, PTFE seals and non-rising spindles operated via ‘T’ type operating members For use with copper tube to BS EN 1057. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2312011
Expiry date:
31/12/2028
Size:
See models
Marking:
IDC, DN, Size and flow arrow on body
Installation Requirements:
R001
Model:
1SUD044 (15mm Press-fit) 1SUD055 (22mm Press-fit)
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#240102023

Range of lever or butterfly operated spherical valves with brass or nickel-plated brass (CC617 and Arc89) or DZR brass bodies (CCDZR). Incorporating brass or nickel-plated brass (CC617 and Arc89 ) or DZR brass ball (CCDZR). For use with copper pipe BS EN 1057. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240102023
Expiry date:
31/01/2029
Size:
See models
Marking:
IDC (E)logo, DN, PN and size on body. IDC (E) logo, DN,PN, CR and size on body – DZR models.
Installation Requirements:
R001
Model:
CC617 range – 15mm to 54mm compression. Arc89 range - 15mm to 54mm compression. CCDZR range - 15mm to 54mm compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#240102029

Range of lever or butterfly operated spherical valves with brass or nickel plate bodies and ball, (DZR brass body and ball on FFDZR prefix models). Maximum working pressure: Various – see model section. Maximum operating temperature 99.0°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240102029
Expiry date:
31/01/2029
Size:
See models – All models BSP (F) x (F)
Marking:
All Models: IDC logo, PN, DN & size on body FFDZR Models: IDC logo, PN, DN, size and CR on body
Installation Requirements:
R001
Model:
ART54 Series: 32.0 BAR: ART54FF0025: ¼”. BSP ART54FF0038: ⅜”. BSP ART54FF0050: ½”. BSP ART54FF0075: ¾”. BSP ART54FF0100: 1”. BSP ART54FF0025P: ¼”. BSP ART54FF0038P: ⅜”. BSP ART54FF0050P: ½”. BSP ART54FF0075P: ¾”. BSP ART54FF0100P: 1”. BSP 25.0 Bar: ART54FF0125: 1¼ ”. BSP ART54FF0150: 1½ ”. BSP ART54FF0200: 2”. BSP ART54FF0125P: 1¼ ”. BSP ART54FF0150P: 1½ ”. BSP ART54FF0200P: 2”. BSP 16.0 Bar: ART54FF0250: 2 1/2” BSP ART54FF0300: 3” BSP ART54FF0400: 4” BSP ART54FF0250P: 2 1/2” BSP ART54FF0300P:3” BSP ART54FF0400P:4” BSP FF617 range: 40.0 Bar: FF617 -0025: ¼”. G or RC thread FF617 -0038: ⅜”. G or RC thread FF617 -0050: ½”. G or RC thread FF617 -0075: ¾”. G or RC thread FF617 -0100: 1”. G or RC thread FF617 -0125: 1¼ ”. G or RC thread FF617 -0150: 1½ ”. G or RC thread FF617 -0200: 2”. G or RC thread FF617 -0025P: ¼”. G or RC thread FF617 -0038P: ⅜”. G or RC thread FF617 -0050P: ½”. G or RC thread FF617 -0075P: ¾”. G or RC thread FF617 -0100P: 1”. G or RC thread FF617 -0125P: 1¼ ”. G or RC thread FF617 -0150P: 1½ ”. G or RC thread FF617 -0200P: 2”. G or RC thread 25 Bar: FF617-0250: 2 1/2” BSP FF617-0300: 3” BSP FF617-0400: 4” BSP FF617-0250P: 2 1/2” BSP FF617-0300P:3” BSP FF617-0400P:4” BSP FFDZR Range: 40.0 Bar: FFDZR -0025: ¼”. G or RC thread FFDZR -0038: ⅜”. G or RC thread FFDZR -0050: ½”. G or RC thread FFDZR -0075: ¾”. G or RC thread FFDZR -0100: 1”. G or RC thread FFDZR -0125: 1” ¼” G or RC thread FFDZR -0150: 1” ½” G or RC thread FFDZR -0200: 2” G or RC thread FF617 & FFDZR series ¼” – 1” with lever or butterfly handle Standard of G type thread: ISO 228 Rc for internal taper pipe thread: BS EN 10226
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#240102701

Double check valve assembly consisting of two spring loaded resilient trim check valve cartridges housed in a nickel plated DZR brass body. The product also incorporates a lever operated isolation valve. For use with copper tube to BS EN 1057. Maximum working pressure 10 Bar Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
240102701
Expiry date:
31/01/2029
Size:
15mm compression
Marking:
IDC Plumbing “E” logo, size, CR, and flow arrow on body
Installation Requirements:
R001
Model:
15DCVB
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
Zhejiang IDC Fluid Control Co Ltd
Company Name
Zhejiang IDC Fluid Control Co Ltd
Address
Machinery Industrial Park Zhugang Town Yuhuan County

View All Listings by this Company

Print This Approval


#240202006

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202006
Expiry date:
28/02/2029
Size:
See Models
Marking:
IDC Logo, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Model:
GMF series DN6 GMF0613S - M10 short male x 3/8"F captive nut GMF0613L - M10 Long male x 3/8"F captive nut GMF0615S - M10 short male x 1/2"F captive nut GMF0615L - M10 Long male x 1/2"F captive nut GMF0603S - M8 short Male x 3/8"F captive nut GMF0603L - M8 long Male x 3/8"F captive nut DN8 GMF0813S - M10 short male x 3/8"F captive nut GMF0813L - M10 Long male x 3/8"F captive nut GMF0815S - M10 short male x 1/2"F captive nut GMF0815L - M10 Long male x 1/2"F captive nut GMF0803S - M8 short male x 3/8"F captive nut GMF0823S - M12 short male x 3/8"F captive nut GMF0823L - M12 Long male x 3/8"F captive nut GMF0825S - M12 short male x 1/2"F captive nut GMF0825L - M12 Long male x 1/2"F captive nut DN10 GMF1013S - M10 short male x 3/8"F captive nut GMF1013L - M10 Long male x 3/8"F captive nut GMF1015S - M10 short male x 1/2"F captive nut GMF1015L - M10 Long male x 1/2"F captive nut GMF1023S - M12 short male x 3/8"F captive nut GMF1023L - M12 Long male x 3/8"F captive nut GMF1025S - M12 short male x 1/2"F captive nut GMF1025L - M12 Long male x 1/2"F captive nut DN13 GMF1313S - M10 short male x 3/8"F captive nut GMF1313L - M10 Long male x 3/8"F captive nut GMF1315S - M10 short male x 1/2"F captive nut GMF1315L - M10 Long male x 1/2"F captive nut GMF1323S - M12 short male x 3/8"F captive nut GMF1323L - M12 Long male x 3/8"F captive nut GMF1325S - M12 short male x 1/2"F captive nut GMF1325L - M12 Long male x 1/2"F captive nut GAN series DN8 GAN0833 - 3/8"F x 3/8"F captive nut GAN0835 - 3/8"F x 1/2"F captive nut GAN0855 - 1/2"F x 1/2"F captive nut GAN0877 - 3/4"F x 3/4"F captive nut GAN0857 - 1/2"F x 3/4"F captive nut DN10 GAN1033 - 3/8"F x 3/8"F captive nut GAN1055 - 1/2"F x 1/2"F captive nut GAN1077 - 3/4"F x 3/4"F captive nut DN13 GAN1333 - 3/8"F x 3/8"F captive nut GAN1355 - 1/2"F x 1/2"F captive nut GAN1377 - 3/4"F x 3/4"F captive nut GAM series DN8 GAM0833 - 3/8"M x 3/8"F captive nut GAM0835 - 3/8"M x 1/2"F captive nut GAM0853 - 1/2"M x 3/8"F captive nut GAM0855 - 1/2"M x 1/2"F captive nut GAM0877 - 3/4"M x 3/4"F captive nut DN10 GAM1033 - 3/8"M x 3/8"F captive nut GAM1035 - 3/8"M x 1/2"F captive nut GAM1053 - 1/2"M x 3/8"F captive nut GAM1055 - 1/2"M x 1/2"F captive nut GAM1077 - 3/4"M x 3/4"F captive nut DN13 GAM1333 - 3/8"M x 3/8"F captive nut GAM1335 - 3/8"M x 1/2"F captive nut GAM1353 - 1/2"M x 3/8"F captive nut GAM1355 - 1/2"M x 1/2"F captive nut GAM1377 - 3/4"M x 3/4"F captive nut GMM series DN8 GMM0833 - 3/8"M x 3/8"M GMM0855 - 1/2"M x 1/2"M DN10 GMM1033 - 3/8"M x 3/8"M GMM1055 - 1/2"M x 1/2"M GMM1055 - 1/2"M x 1/2"M DN13 GMM1355 - 1/2"M x 1/2"M GMM1377 - 3/4"M x 3/4"M GEF series DN8 GEF0833 - 3/8"Elbow F x 3/8"F GEF0835 - 3/8"Elbow F x 1/2"F GEF0853 - 1/2"Elbow F x 3/8"F GEF0855 - 1/2"Elbow F x 1/2"F DN10 GEF1055 - 1/2"Elbow F x 1/2"F GEF1057 - 1/2"Elbow F x 3/4"F GEF1077 - 3/4"Elbow F x 3/4"F DN13 GEF1355 - 1/2"Elbow F x 1/2"F GEF1357 - 1/2"Elbow F x 3/4"F GEF1377 - 3/4"Elbow F x 3/4"F GEM series DN8 GEM0833 - 3/8"Elbow F x 3/8"M GEM0835 - 3/8"Elbow F x 1/2"M GEM0853 - 1/2"Elbow F x 3/8"M GEM0855 - 1/2"Elbow F x 1/2"M DN10 GEM1055 - 1/2"Elbow F x 1/2"M GEM1057 - 1/2"Elbow F x 3/4"M GEM1077 - 3/4"Elbow F x 3/4"M DN13 GEM1355 - 1/2"Elbow F x 1/2"M GEM1357 - 1/2"Elbow F x 3/4"M GEM1377 - 3/4"Elbow F x 3/4"M GMC series DN8 GMC0815S - M10 short male x 15mm compression GMC0815L - M10 Long male x 15mm compression GMC0825S - M12 short male x 15mm compression GMC0825L - M12 Long male x 15mm compression DN10 GMC1015S - M10 short male x 15mm compression GMC1015L - M10 Long male x 15mm compression GMC1025S - M12 short male x 15mm compression GMC1025L - M12 Long male x 15mm compression DN13 GMC1315S - M10 short male x 15mm compression GMC1315L - M10 Long male x 15mm compression GMC1325S - M12 short male x 15mm compression GMC1325L - M12 Long male x 15mm compression GAC series DN8 GAC0855 - 15mm compression x 1/2"F captive nut GAC0857 - 15mm compression x 3/4"F captive nut GAC0877 - 22mm compression x 3/4"F captive nut DN10 GAC1053 - 15mm compression x 3/8"F captive nut GAC1055 - 15mm compression x 1/2"F captive nut GAC1057 - 15mm compression x 3/4"F captive nut GAC1077 - 22mm compression x 3/4"F captive nut DN13 GAC1355 - 15mm compression x 1/2"F captive nut GAC1357 - 15mm compression x 3/4"F captive nut GAC1377 - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut GVF series DN8 GVF0855 - 15mm isolating valve x 1/2"F captive nut GVF0877 - 22mm isolating valve x 3/4"F captive nut DN10 GVF1055 - 15mm isolating valve x 1/2"F captive nut GVF1057 - 15mm isolating valve x 3/4"F captive nut GVF1077 - 22mm isolating valve x 3/4"F captive nut DN13 GVF1355 - 15mm isolating valve x 1/2"F captive nut GVF1377 - 22mm isolating valve x 3/4"F captive nut GVF1977 - DN19 22mm isolating valve x 3/4"F captive nut GDC series DN8 GDC0855 - 15mm compression x 15mm compression GDC0877 - 22mm compression x 22mm compression DN GDC1055 - 15mm compression x 15mm compression GDC1077 - 22mm compression x 22mm compression DN13 GDC1355 - 15mm compression x 15mm compression GDC1377 - 22mm compression x 22mm compression DN19 GDC1977 - 22mm compression x 22mm compression GDEF series DN13 GDEF1355 - 1/2"Elbow F x 1/2"Elbow F
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#240202019

Range of inline, T-piece or angled screwdriver operated spherical valves with brass or chrome plated brass bodies and ball, for use with copper pipe to BS EN 1057 and Stainless steel to EN 10312. Maximum working pressure 10.0 Bar Models 1GLB311NP-SD, 1GLB411NP-SD, 1GLB111, 1GLB121 – 16.0 Bar Maximum operating temperature 85°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240202019
Expiry date:
28/02/2029
Size:
See Models
Marking:
IDC logo, size, PN and flow arrow on valve body
Installation Requirements:
R001
Model:
1FWA201 - 15mm Compression x 1/2" F BSP 1FWA202 - 22mm Compression x 3/4” F BSP 1WMB201 - 15mm Compression× 3/4" M BSP 1WMA201 - 15mm Compression× 3/4" M BSP 1WMK201 - 15mm Compression × 15mm Compression × 3/4" M BSP 1FWB201 - 15mm Compression x 1/2"F BSP 1FWB202 - 22mm Compression x 3/4”F BSP 1GLC111NP-SD - 15mm Compression 1GLC121NP-SD - 22mm Compression 1GLC111-SD - 15mm Compression 1GLC121-SD - 22mm Compression 1GLC111NP - 15mm Compression 1GLC121NP - 22mm Compression 1GLB311NP-SD - 15mm Compression 1GLB411NP-SD - 15mm Compression x 1/2”M BSP 1GLB111 - 15mm Compression 1GLB121 - 22mm Compression
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.