IDC ‘BDGxxx’ range of press fittings with brass or nickel plated brass bodies (see model) incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). The BDG241 and BDG257 prefix models incorporate an EPDM gasket on the captive nut end connection. Pressfit jointing is achieved by either a U or TH crimping profile. Compression connections are for use with copper pipe 12-28mm (manufactured to EN1057) or Irish copper pipe 14.7-27.4mm (manufactured to EN1057). For above ground use only. Maximum working pressure 10.0 bar. 20, 25 & 26mm pressfit sizes cold water use only. Threaded, compression and 16 & 32mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404712

Expiry date:

30/04/2029

Size:

Pressfit: 16, 20, 25, 26 & 32mm. Compression: 12mm, 14.7mm, 15mm, 18mm, 21mm, 22mm, 27.4mm & 28mm. Threaded: ⅜”, ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (U or TH), size and PN on fitting body.

Installation Requirements:

R001

Model:

Models include a suffix to denote profile and whether brass or nickel plated. -U = brass with U profile. -TH = brass with TH profile. -P-U = nickel plated brass with U profile. -P-TH = nickel plated with TH profile. BDG245 - Straight PEX x PEX (press x press): BDG2450101: 16mm x 16mm, BDG2450301: 20mm x 20mm, BDG2450401: 25mm x 25mm, BDG2450501: 26mm x 26mm, BDG2450601: 32mm x 32mm. BDG244 - Reduce Straight PEX x PEX (press x press): BDG2440101: 20mm x 16mm, BDG2440201: 25mm x 16mm, BDG2440301: 26mm x 16mm, BDG2440601: 25mm x 20mm, BDG2440701: 26mm x 20mm, BDG2440800: 32mm x 16mm, BDG2440702: 32mm x 20mm, BDG2440802: 32mm x 26mm. BDG242 - Straight PEX x Male (press x male): BDG2420101: 16mm x 3/8"M, BDG2420201: 16mm x 1/2"M, BDG2420202: 16mm x 3/4"M, BDG2420501: 20mm x 1/2"M, BDG2420601: 20mm x 3/4"M, BDG2420602: 20mm x 1"M, BDG2420701: 25mm x 3/4"M, BDG2420702: 25mm x 1"M, BDG2420802: 26mm x 1/2"M, BDG2420803: 26mm x 3/4"M, BDG2420804: 26mm x 1"M, BDG2420900: 32mm x 3/4"M, BDG2420901: 32mm x 1"M. BDG243 - Straight PEX x Female (press x female): BDG2430100: 16mm x 3/8"F, BDG2430101: 16mm x 1/2"F, BDG2430102: 16mm x 3/4"F, BDG2430301: 20mm x 1/2"F, BDG2430401: 20mm x 3/4"F, BDG2430402: 20mm x 1"F, BDG2430501: 25mm x 3/4"F, BDG2430601: 25mm x 1"F, BDG2430701: 26mm x 3/4"F, BDG2430801: 26mm x 1"F, BDG2430901: 32mm x 1"F. BDG246 - Stop end (press): BDG246001: 16mm, BDG246003: 20mm, BDG246004: 25mm, BDG246005: 26mm, BDG246006: 32mm. BDG253 - Straight Compression x PEX (compression x press): BDG2530400: 12mmC x 16mm, BDG2530401: 15mmC x 16mm, BDG2530403: 15mmC x 20mm, BDG2530503: 18mmC x 20mm, BDG2530504: 18mmC x 25mm, BDG2530603: 22mmC x 20mm, BDG2530803: 28mmC x 20mm, BDG2530804: 28mmC x 25mm, BDG2530805: 28mmC x 26mm, BDG2530806: 28mmC x 32mm, BDG2531401: 1/2"C x 16mm, BDG2531603: 3/4"C x 20mm, BDG2531605: 3/4"C x 26mm, BDG2531805: 1"C x 26mm, BDG2531806: 1"C x 32mm. BDG241 - Tap connector PEX x Swivel Female (press x captive nut female): BDG2410101: 16 x 3/8"F, BDG2410201: 16 x 1/2"F, BDG2410202: 16 x 3/4"F, BDG2410501: 20 x 1/2"F, BDG2410601: 20 x 3/4"F, BDG2410701: 25 x 3/4"F, BDG2410801: 25 x 1"F, BDG2410803: 26 x 3/4"F, BDG2410804: 26 x 1"F, BDG2410901: 32 x 1"F. BDG249 - Elbow (press): BDG2490101: 16mm, BDG2490201: 20mm, BDG2490301: 25mm, BDG2490401: 26mm, BDG2490501: 32mm. BDG449 - Elbow 45° (press): BDG4490301: 25mm, BDG4490401: 26mm, BDG4490501: 32mm. BDG256 - Elbow PEX x Male (press x male): BDG2560103: 16mm x 3/8"M, BDG2560104: 16mm x 1/2"M, BDG2560106: 16mm x 3/4"M, BDG2560304: 20mm x 1/2"M, BDG2560306: 20mm x 3/4"M, BDG2560308: 20mm x 1"M, BDG2560406: 25mm x 3/4"M, BDG2560408: 25mm x 1"M, BDG2560506: 26mm x 3/4"M, BDG2560508: 26mm x 1"M, BDG2560608: 32mm x 1"M. BDG247 - Elbow PEX x Female (press x female): BDG2470100: 16mm x 3/8"F, BDG2470101: 16mm x 1/2"F, BDG2470102: 16mm x 3/4"F, BDG2470301: 20mm x 1/2"F, BDG2470302: 20mm x 3/4"F, BDG2470303: 20mm x 1"F, BDG2470401: 25mm x 3/4”F, BDG2470402: 25mm x 1”F, BDG2470501: 26mm x 3/4"F, BDG2470502: 26mm x 1"F, BDG2470600: 32mm x 3/4"F, BDG2470601: 32mm x 1"F. BDG248 - Wall Plate PEX x Female (press x female): BDG2480101: 16 x 1/2"F, BDG2480301: 20 x 1/2"F, BDG2480401: 20 x 3/4"F, BDG2480402: 25x 3/4"F, BDG2480403: 25 x 1"F, BDG2480501: 26 x 3/4"F, BDG2480502: 26 x 1"F. BDG257 - Elbow Tap connector PEX x Swivel Female (press x captive nut female): BDG2570103: 16 x 3/8"F, BDG2570104: 16 x 1/2"F, BDG2570106: 16 x 3/4"F, BDG2570304: 20 x 1/2"F, BDG2570306: 20 x 3/4"F, BDG2570401: 25 x 3/4"F, BDG2570402: 25 x 1"F, BDG2570506: 26 x 3/4"F, BDG2570508: 26 x 1"F, BDG2570608: 32 x 1"F. BDG255 - Equal Tee (press): BDG2550101: 16mm, BDG2550301: 20mm, BDG2550401: 25mm, BDG2550501: 26mm, BDG2550601: 32mm. BDG254 - Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): BDG2540101: 16 x 20 x 16, BDG2541001: 20 x 16 x 16, BDG2541101: 20 x 16 x 20, BDG2541201: 20 x 20 x 16, BDG2541202: 20 x 26 x 16, BDG2541402: 20 x 26 x 20, BDG2541403: 20 x 32 x 32, BDG2541501: 25 x 16 x 16, BDG2541601: 25 x 16 x 20, BDG2541701: 25 x 16 x 25, BDG2541801: 25 x 20 x 16, BDG2541901: 25 x 20 x 20, BDG2542001: 25 x 20 x 25, BDG2542101: 25 x 25 x 20, BDG2541300: 26 x 16 x 16, BDG2542300: 26 x 16 x 20, BDG2542500: 26 x 20 x 16, BDG2542301: 26 x 16 x 26, BDG2542401: 26 x 20 x 20, BDG2542501: 26 x 20 x 26, BDG2542502: 26 x 26 x 16, BDG2542503: 26 x 26 x 20, BDG2542800: 32 x 20 x 26, BDG2542602: 32 x 32 x 26, BDG2542504: 26 x 32 x 26, BDG2542802: 32 x 32 x 20, BDG2542803: 32 x 16 x 32, BDG2542801: 32 x 20 x 32, BDG2542601: 32 x 26 x 26, BDG2542701: 32 x 26 x 32. BDG250 - Reduce Tee PEX(Left) x PEX(Right) x Male(Middle) (press x male x press): BDG2500101: 16 x 1/2"M x 16, BDG2500301: 20 x 1/2"M x 20, BDG2500302: 20 x 3/4"M x 20, BDG2500401: 25 x 3/4"M x 25, BDG2500402: 25 x 1"M x 25, BDG2500500: 26 x 1/2"M x 26, BDG2500501: 26 x 3/4"M x 26, BDG2500502: 26 x 1"M x 26, BDG2500600: 32 x 1/2"M x 32, BDG2500601: 32 x 3/4"M x 32, BDG2500701: 32 x 1"M x 32. BDG251 - Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): BDG2510101: 16 x 1/2"F x 16, BDG2510301: 20 x 1/2"F x 20, BDG2510302: 20 x 3/4"F x 20, BDG2510303: 26 x 1/2"F x 26, BDG2510304: 26 x 3/4"F x 20, BDG2510306: 26 x 3/4"F x 26, BDG2510308: 26 x 1"F x 26, BDG2510401: 25x3/4"F x 25, BDG2510402: 25x1"F x 25, BDG2510500: 32 x 1/2"F x 32, BDG2510501: 32 x 3/4"F x 32, BDG2510502: 32 x 1"F x 32.

Factor:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100016

View All Listings by this Company

Manufacturer:

IDC FLUID CONTROL CO., LTD.

Company Name

IDC FLUID CONTROL CO., LTD.

Address

Mechanical & Electrical Industrial Zone Yuhuan City Zhejiang Province

View All Listings by this Company