Range of brass or stainless steel (added January 2020) double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1904029

Expiry date:

30/04/2024

Size:

See model.

Marking:

IL FLESSIBILE di Nicastri & C. S.r.l. logo ‘ilF’, WRAS and year of manufacture (YY) on ferrule.

Installation Requirements:

R001

Model:

For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2 Surface finishes: Raw Chromed Electropolished Polished Gold Bronze Copper Nickel ACR White Black Red Grey Silver Old brass Beige Green Yellow Orange Champagne Fumé Black metal Gun metal Model code key: FXB2WX.AAAA.BBBB.CCC AAAA: identifies the type of external finish BBBB: identifies the type of fitting CCC : identifies the length (between 500 and 2000mm) Models Added January 2020: Stainless Steel (INOX) interlocked hoses and end connectors. Model code key: FXB2WX.AABBCCCC.DDD AA: identifies hose raw material and diameter BB: identifies the type of external finish CCCC: identifies the type of fittings DDD: identifies the length (between 50 and 200cm)

Factor:

IL Flessibile di Nicastri & C. S.r.l.

Company Name

IL Flessibile di Nicastri & C. S.r.l.

Address

View All Listings by this Company

Range of stainless-steel braided EPDM lined hoses, incorporating EPDM gaskets. Some models incorporate an isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1905373

Expiry date:

31/05/2024

Marking:

Hitik, WRAS and Production year YYYY on crimped connection

Installation Requirements:

R001

Model:

H1E3D15F08 - 15mm x 1/2”, DN10 H1E3D15F12 - 15mm x 3/4”, DN10 H1E3D15D15 - 15mm x 15mm, DN10 H1E3I15F08 - 15mm-Iso Valve x 1/2”, DN10 H1E3I15F12 - 15mm-Iso Valve x 3/4”, DN10 H1E3F08F08 - 1/2” x 1/2”, DN10 H1E3F08F12 - 1/2” x 3/4”, DN10 H1E4D15F08 - 15mm x 1/2”, DN13 H1E4D22F12 - 22mm x 3/4”, DN13 H1E4D22D22 - 22mm x 22mm, DN13 H1E2D15M30 - 15mm x M10, DN8 H1E2D15M36 - 15mm x M12, DN8

Manufacturer:

Yuhuan Hitik Plumbing Manufacturing

Company Name

Yuhuan Hitik Plumbing Manufacturing

Address

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies with captive nut inlet and push fit isolation valve outlet with brass balls. Maximum working pressure and temperature: 16.0 bar for cold water and 10.0 bar at 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1905019

Expiry date:

31/05/2024

Size:

½” BSP captive nut x 15mm push fit (models DG170A & DG170B). ¾” BSP captive nut x 22mm push fit (models DG171A & DG171B).

Marking:

WRAS, Fanski and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

DG170A, DG170B, DG171A & DG171B

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Range of brass interlocked hoses (various finishes) incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1904074

Expiry date:

30/04/2024

Size:

See model.

Marking:

SHS, WRAS AND YEAR OF MANUFACTURE YYYY ON FERRULE

Installation Requirements:

R001

Model:

V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Factor:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

info@samuel-heath.com

View All Listings by this Company

Luxor type ‘TPSIV’” range of stainless steel braided, PVC coated stainless steel braided (DN8 only) or nylon braided (DN6 & DN8 only) thermoplastic silicone lined flexible hose assemblies supplied with a variety of end connectors and EPDM seals. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1906317

Expiry date:

30/06/2024

Size:

End connections available on one or both sides: Male: 3/8 BSP swivel – 3/8 BSP – 1/2 BSP – 1/2 BSP (H.N.) – 1/2 BSP (D.B.) – 1/2 BSP 32 mm (H.N.) – 1/2 BSP swivel – 1/2 NPSM – 1/2 NPT (H.N.) – 1/2 taper (H.N.) – 3/4 BSP – M8 hexag. short – M8 hexag. medium – M8 cyl. short – M8 cyl. medium – M8 cyl. long – M10 – M10. hexag. – M10. hexag. medium – M10 hexag. long – M10 (H.N.) – M10 (P.I.) – M11 – M12 – M12 hexag. medium – M12 (P.I.) – M12 (C.T.) – M15 swivel Captive nut: 3/8 BSP – 3/8 BSP (G.B.) – 3/8 BSP d.6,6 (G.B.) – 3/8 BSP w/gasket (H.N.) – 3/8 BSP w/gasket – 3/8 BSP w/O-ring (G.B.) – 1/2 BSP – 1/2 BSP w/gasket – 1/2 BSP w/O-ring (G.B.) – 1/2 BSP w/O-ring (H.N.) – 1/2 NPSM – 3/4 BSP – 3/4 BSP w/gasket – 3/4 BSP w/2 O-rings (H.N.) – M10 – M15 Female elbow: 3/8 BSP – 3/8 BSP w/gasket – 3/8 BSP (G.B.) – 3/8 BSP H 29,5 mm (G.B.) – 1/2 BSP – 1/2 BSP w/gasket – 1/2 BSP w/O-ring (H.N.) – 3/4 BSP – 3/4 BSP w/gasket – 3/4 BSP w/2 O-rings (H.N.) Plug in: straight Ø10 mm – straight w/2 O-rings – straight w/O-ring (F.I.) Compression: Ø10 mm – Ø15 mm Sizes added January 2021: Applicable to DN8 stainless steel braided TPSiV hoses only. Captive nut: (Plastic) 3/8 w/O-ring (V.I.) Female elbow: (Plastic) 5/8 w/O-ring – (Brass) 3/8 BSP H 29,5 mm (V.I.) Model/size added April 2022: DN10 ½” BSP (F) W/O-ring (G.B.) DN10 ½” BSP (F) Eblow W/O oring (G.B.) Model/size added April 2023: DN8 Female elbow 5/8 w/O-ring DN8 Captive nut 3/8 w/O-ring (V.I.) DN8 Female elbow 3/8 BSP H 29,5 mm (V.I.)

Marking:

LUX, date or year of manufacture (MM YY) or (YY), DN size, WRAS, temperature rating (70°C) and pressure rating: PN 10 on crimped connector Marking added January 2021: LUX, date of manufacture (YY), WRAS, Maximum operating temperature, DN and PN on crimped connector. Models/sizes added April 2023: LUX, YY, WRAS, DN, temp., PN stamped on crimp connection.

Installation Requirements:

R001 R008

Model:

Luxor type ‘TPSIV’ flexible hose assemblies DN6, DN8, DN10, DN13 bore diameters

Manufacturer:

Luxor Spa

Company Name

Luxor Spa

Address

25018 Montichiar (Bresac) Via Madonna 94 ITALY

View All Listings by this Company

Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1906335

Expiry date:

30/06/2024

Size:

See model

Marking:

Jianglin, WRAS and year of manufacture (YYYY) on crimped connector

Installation Requirements:

R001

Model:

See model. JL – A*B – XX – D – E - XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B (from 01 to 42): Connections 01 and 02 only applicable for DN6 bore hoses only. Connections 03, 19, 26, and 29 applicable for DN6 and DN8 bore hoses only. Connections 05, 06, 20, 21, 22, 23, 30, 35, 36, 39 and 40 applicable for DN6, DN8 and DN10 bore hoses only. Connections 04, 07, 08, 09, 10, 11, 12, 24, 31, 33, 37 and 41 applicable for DN6, DN8, DN10 and DN13 bore hoses only. Connections 13, 14 and 15 applicable for DN8, DN10, DN13 and DN19 bore hoses only. Connections 25 and 27 applicable for DN8, DN10 and DN13 bore hoses only. Connections 16, 17, 18 and 28 applicable for DN10, DN13 and DN19 bore hoses only. Connections 32, 34, 38 and 42 apply to all bore hoses. 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 19 = M8*(12-110), 26 = F15, 29 = 10mm compression, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 20 = M10*(12-110), 21 = M11*(12-110), 22 = M12*(12-110), 23 = M14*(12-110), 30 = 12mm compression fitting, 35 = 10mm pushfit, 36 = 12mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 24 = M15*(12-110), 31 = 15mm compression fitting, 33 = 15mm isolation valve, 37 = 15mm pushfit, 41 = 15mm pushfit isolation valve, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1 28 = 22mm smooth tube, 25 = M16*(12-110), 27 = 15mm smooth tube, 32 = 22mm compression fitting, 34 = 22mm isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve. XX = DN (Dimension from 06 to 19): DN6 = 06, DN8 = 08, DN10 = 10, DN13 = 13, DN19 = 19. D = Outer braided material: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire. E = Inner tube material: 1 = EPDM. XXX = Length (15cm to 200cm): 015 = 15cm … 0200 = 200cm For example: JL-09*20-08-SS-1-045 would be for F1/2 x M10, DN8, stainless steel braided, EPDM inner tube, 45cm long.

Manufacturer:

Yuhuan Jianglin Plumbing Hose & parts Inc

Company Name

Yuhuan Jianglin Plumbing Hose & parts Inc

Address

Jinhai Avenue Yuhuan Economic Development Zone

Postcode

China

View All Listings by this Company

Range of polyamide (PA) braided PEX lined flexible hose assemblies with brass end connections, EPDM washers and fibre washers. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1904348

Expiry date:

30/04/2024

Size:

Bore diameters: DN6 & DN8 End connections: Female elbow (BSP captive nut): ⅜”, ½”, ¾”. Female (BSP captive nut): ⅜”, ½”, ¾”, 7/16”, 9/16”. Tube: 8mm to 12mm. Male (BSP): M10 to M15. Male (BSP): ⅜”, ½,” ¾”, 7/16”, 9/16” Comp. joint: ø8 - ø15 Plugin: D8- D13 Size added July 2021: Male: M8

Marking:

Neoperl, Softpex, WRAS and date of manufacture (YYMMDD) on crimped connector

Installation Requirements:

R001 R008

Model:

Softpex range: 39.00CD.EFG.HI Where: CD.EFG = hose specification including fitting specification (00.000 – 99.999). HI = Packaging information (0-9).

Factor:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim, D-79379

Country

Germany

Phone

0049 7631 1880

General Email

approvals@neoperl.de

View All Listings by this Company

Manufacturer:

Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S, Neoperl Iberica S.A, Neoperl Bulgaria

Company Name

Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S, Neoperl Iberica S.A, Neoperl Bulgaria

Address

General Email

View All Listings by this Company

Shower hose with PVC silver body. Maximum working temperature 65ºC

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1907023

Expiry date:

31/07/2024

Note:

Open outlet use only

Size:

½” captive nut inlet and outlet

Marking:

Duschy and WRAS on conical nut

Installation Requirements:

R001

Model:

11509-S

Manufacturer:

Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd

Company Name

Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd

Address

28 Hongyue Road Economic & Technolgical Development Zone

Postcode

China

View All Listings by this Company

Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1906395

Expiry date:

30/06/2024

Size:

See model

Marking:

TPK, WRAS and year of manufacture (YYYY) on Ferrule

Installation Requirements:

R001

Model:

122259 DN10, 15MM COMPRESSION X 3/8" TAP CONNECTOR X 300MM 500898 DN10, 15MM COMPRESSION X 1/2" TAP CONNECTOR X 300MM 500903 DN10, 15MM COMPRESSION X 1/2" TAP CONNECTOR X 500MM 114103 DN10, 15MM COMPRESSION X 1/2" TAP CONNECTOR X 1000MM 307096 DN10, 15MM COMPRESSION VALVE X 1/2" TAP CONNECTOR X 500MM 699045 DN10, 15MM COMPRESSION VALVE X 1/2" TAP CONNECTOR X 300MM 69025 DN10, 15MM COMPRESSION X 3/4" TAP CONNECTOR X 300MM 897397 DN10, 15MM COMPRESSION X 3/4" TAP CONNECTOR X 500MM 509861 DN10, 15MM COMPRESSION X 3/4" TAP CONNECTOR X 1000MM 316637 DN8, 15MM COMPRESSION X M10 MONOBLOCK TAILS X 300MM 898868 DN10, 15MM COMPRESSION X M12 MONOBLOCK TAILS X 300MM 313144 DN10, 15MM COMPRESSION X 15MM COMPRESSION X 300MM 508022 DN10, 15MM COMPRESSION X 15MM COMPRESSION X 500MM 509802 DN10, 15MM COMPRESSION X 15MM COMPRESSION X 1000MM 116063 DN13, 22MM COMPRESSION X 3/4" TAP CONNECTOR X 1000MM 506150 DN13, 22MM COMPRESSION X 3/4" TAP CONNECTOR X 300MM 507681 DN13, 22MM COMPRESSION X 3/4" TAP CONNECTOR X 500MM 897436 DN13, 22 MM COMPRESSION VALVE X 3/4" TAP CONNECTOR X 500MM 306887 DN13, 22MM COMPRESSION VALVE X 3/4 TAP CONNECTOR X 300MM 316600 DN13, 22MM COMPRESSION X 22MM COMPRESSION X 500MM 316628 DN13, 22MM COMPRESSION X 22MM COMPRESSION X 300MM

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Country

Northhampton

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of stainless steel braided PEX lined flexible hose assemblies with brass end connections and EPDM o ring and washers with various end connections options. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909312

Expiry date:

30/09/2024

Size:

M8, M10, M12, M15, F3/8”, F1/2, F3/4”, F15, 3/8” BSP(M), 1/2” BSP (M), 3/4”BSP (M)

Marking:

WRAS, Qiang Ying, date of manufacture (YYYY) on crimped connection.

Installation Requirements:

R001 R008

Model:

PEX-QY

Manufacturer:

Qiang Ying Hose Factory

Company Name

Qiang Ying Hose Factory

Address

Block 1 No 225 Jiaxing North Road Shuikou Town Kaiping City

Postcode

China

View All Listings by this Company

‘Qualflex Classic’ range of stainless-steel braided EPDM lined flexible hoses. Qualflex Pushfit and Qualflex Valve Pushfit (Black Plastic End Connectors) models added January 2022 are for use with copper pipe (manufactured to BS EN 1057), PB Pipe (manufactured to BS 7291-2) & PE-X Pipe (manufactured to BS 7291-3). The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves or stainless-steel strainers. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909350

Expiry date:

30/09/2024

Note:

R008 applies to natural models and models added January 2022 only.

Size:

See model

Marking:

Qualflex, QWRAS, date of manufacture (month code and year YY) and operating parameters on ferrule. Models added January 2022: Qualflex, QWRAS and year of manufacture (YY) on ferrule.

Installation Requirements:

R001 R008

Model:

‘Qualflex Classic’ range of hoses with bore diameters DN6, DN8, DN10, DN12 & DN19 available with the following end connections: DM Pushfit, Black: 15mm, 21mm, 22mm Polypipe Pushfit, White: 15mm, 22mm John Guest Pushfit, Grey: 15mm, 22mm Valved DM Pushfit Black: 15mm, 21mm, 22mm Brass Pushfit: 10mm, 12mm, 15mm Qualflex Brass Body: 15mm, 22mm Brass Compression with Iso Valve: 15mm, 22mm Brass Compression: 15mm, 22mm, 28mm Brass Flat Faced Female Straight: 3/8”, 7/16”, 1/2”, 3/4”, 1” Brass Flat Faced Female Elbow: 3/8", 1/2", 3/4", 1” Brass Retained Female Straight: 3/8", 1/2", 3/4" Brass Retained Female Elbow: 3/8", 1/2", 3/4" Brass Coned Female Straight: 1/4", 3/8", 1/2" Brass Coned Female Elbow: 1/4", 3/8", 1/2" Brass Female Straight 7/16" UNF Brass Male Straight: 1/4", 3/8", 3/8" NPT, 1/2", 3/4", 1” Brass Standpipe: 3/8", 10mm, 12mm, 15mm, 22mm, 28mm Brass Monoblock: M8, M10, M12 Brass Filling Loop: 15mm Plastic Flat Faced Female Straight, Black: 1/2", 3/4" Plastic Flat Faced Female Straight, Natural: 1/2", 3/4" Plastic Standpipe, Black: 15mm, 22mm Plastic Flat Faced Female Elbow, Natural and Black: 3/4" Plastic Retained Female Straight, Natural: 1/2", 3/4" Plastic Retained Female Straight, Black: 1/2", 3/4" Plastic Retained Female Elbow, Natural and Black: 3/4" Models added January 2022: Qualflex Pushfit (Black Plastic End Connectors): 15mm DN8, DN10 & DN12 bore. 22mm DN12 & 19 bore. 21mm DN12 & 19 bore. Qualflex Valve Pushfit (Black Plastic End Connectors): 15mm DN8, DN10 & DN12 bore. 22mm DN12 & 19 bore. 21mm DN12 & 19 bore.

Manufacturer:

Hydralectric Ltd.

Company Name

Hydralectric Ltd.

Address

5 High Road Byfleet Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

View All Listings by this Company

Nylon and stainless steel braided flexible hose assemblies with EPDM inner hose and brass end connectors which incorporate EPDM washers and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum working temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909363

Expiry date:

30/09/2024

Size:

Bore diameters: DN6 & DN8 (Nylon and stainless steel braided hoses). DN10 & DN14 (stainless steel braided hoses only). Connection types and sizes (see model).

Marking:

Hualing, WRAS and date of manufacture (yyyy) on ferrule.

Installation Requirements:

R001

Model:

HL-SS-XX-XX-XXX-XXX & HL-N-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose. N=Nylon Pull out Hose 1st & 2nd XX = Connection sizes: 01=F3/8 02=F1/2 03=F3/4 (only available on SS models). 04=F15*1 (only available on SS models). 05=M3/8 (only available on SS models). 06=M1/2 (only available on SS models). 07=M3/4 (only available on SS models). 08=M15 09=M12 10=M10 11=M8 12=Pushfit (M) 11mm ID or (F) 11mm OD. 1st XXX: Hose size: Nylon and stainless steel braided hoses: 006= DN6, 008= DN8. Stainless steel braided hoses only: 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6 hoses. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8 hoses. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10 hoses. Connection 02, 03, 06, 07 applicable for DN14 hoses.

Manufacturer:

Kaiping City Hualing Hoses Co.,Ltd

Company Name

Kaiping City Hualing Hoses Co.,Ltd

Address

No 42 Jinshan Road Shagang Industrial Park Shuikou Town

Postcode

China

Country

Kaiping City

View All Listings by this Company

Stainless steel inter-locked shower hoses with EPDM lining and various finishes. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909391

Expiry date:

30/09/2024

Note:

Open outlet use only.

Size:

½ BSP (F)

Marking:

PPI, WRAS & year of manufacture (yyyy) on ferrule

Installation Requirements:

R001

Model:

SH ½”-1000S-CP SH ½”-1500S-PVD SH ½”- 1500S-CP SH ½”-1500S-EP SH ½”-1750S-CP SH ½”-1750S-EP SH ½”-500S-EP SH ½”-1500S-B SH ½”-1500S-B-PVD SH ½”- 1750S-B SH ½”-M15x1-1500S-CP SH 15x1-1500S-CP SH15 ½”-1500s-CP SH22X1-15x1-1500S-CP Model added December 2022 SH 1/2" - 1500S BGP

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Range of stainless steel braided hoses incorporating an EPDM inner hose and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909048

Expiry date:

30/09/2024

Size:

See model

Marking:

WRAS, Yuhuan Weilebao Sanitaryware Co., Ltd and date of manufacture (MM/YY) on ferrule.

Installation Requirements:

R001

Model:

WLB-X*X-X (20cm~65cm) The first X is one of connector type: 01: F1/2. The second X is other connector type: 01:F1/2; 02:M10*1; 03:M12*1. The third X is bore diameter: 01:DN11; 02:DN12; 03:DN13.

Manufacturer:

Yuhuan Weilebao Sanitary Ware Co., Ltd

Company Name

Yuhuan Weilebao Sanitary Ware Co., Ltd

Address

View All Listings by this Company

Stainless steel interlocked (chrome plated) silicone lined kitchen tap pull-out hose. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909049

Expiry date:

30/09/2024

Note:

Open outlet use only.

Size:

M12 threaded inlet and outlet.

Marking:

AFD, date of manufacture (YY) and Dornbracht on ferrule

Installation Requirements:

R001

Model:

04300212000

Factor:

Aloys F. Dornbracht GmbH & Co. KG

Company Name

Aloys F. Dornbracht GmbH & Co. KG

Address

Kobbingser Muhle 6 D-58640 Iserlohn

Country

Germany

View All Listings by this Company

Range of TPSiV lined shower hoses with a corrugated interlocking stainless steel outer (chrome plated). Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909071

Expiry date:

30/09/2024

Note:

Open outlet use only

Size:

see mdoel

Marking:

Solex, WRAS & date of manufacture MM/YY

Installation Requirements:

R001

Model:

H25X0003S‐01: 1/2" BSP (F) x M15 (M) H25X0003S‐02: M20 (F) x M15 (M) H25X0003S‐03: 1/2" BSP (F) x 1/2" BSP (F) HXS “H” hose abbreviation “X” shows end fittings and length number from 150mm to 2200mm “S” shows series abbreviation  represent type of construction and use  represent the number of products

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd

Company Name

Xiamen Solex High-Tech Industries Co., Ltd

Address

No. 298 Yangguang Road West Xinyang Industrial Zone Haicang District Xiamen, Fujian

Country

China

View All Listings by this Company

Range of stainless steel braided PEX lined flexible hose assemblies with brass end connections and EPDM o ring and washers with various end connections options. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909395

Expiry date:

30/09/2024

Size:

M8, M10, M12, M15, F3/8”, F1/2, F3/4”, F15, 3/8” BSP(M), 1/2” BSP (M), 3/4”BSP (M)

Marking:

PEX-KITA, WRAS & YEAR OF MANUFACTURE YYYY ON CRIMPED CONNECTION (KITA - registered tradename of Ka Shing Enterprises (H.K) Ltd)

Installation Requirements:

R001 R008

Model:

PEX-KITA

Factor:

Ka Shing Enterprises (H.K) Ltd

Company Name

Ka Shing Enterprises (H.K) Ltd

Address

Flat A, 3/F Waylee Industry Center 30-38 Tsuen King Circuit Tsuen Wan

Country

Hong Kong

View All Listings by this Company

Stainless steel braided EPDM lined flexible hose assembly with EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1911006

Expiry date:

30/11/2024

Size:

½” BSP captive nut

Marking:

Intatec logo, WRAS & year of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Model:

HOSE400

Manufacturer:

Intatec Ltd

Company Name

Intatec Ltd

Address

Airfield Industrial Estate, Hixon, Staffs.

Postcode

ST18 0PF

Country

United Kingdom

Phone

+44 1889 272 199

View All Listings by this Company

Range of stainless-steel braided hoses, incorporating a dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. Model SOG1212050CS incorporates a servicing valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1911017

Expiry date:

30/11/2024

Note:

See model

Size:

see model

Marking:

Coastal, WRAS, date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Model:

SG1212xxx - ½” BSP (F) captive nuts. SG1212xxx-1CS – G1/2 metal nut x G1/2CS nut SG3812xxx – 3/8” captive nut x ½” BSP (F) captive nut. SG3838xxx – 3/8” BSP (F) captive nuts. SG1234xxx - ¾” BSP (F) captive nut x ½” BSP (F) captive nut. SG3434xxx - ¾” BSP (F) captive nuts. SG38M10xxx – 3/8” BSP (F) captive nut x M10 thread. SOG1212xxx - ½” BSP (M) x ½” BSP (F) captive nut. SOG1212xxx CS – 15mm compression x ½” BSP (F). SOG1212xxx (GLF) CS – 15mm compression x ½” BSP (F). XXX is replaced with the length, ranging from 030 (30cm) to 200 (200cm)

Manufacturer:

Coastal (Ningbo) Hardware Mfg Co Ltd

Company Name

Coastal (Ningbo) Hardware Mfg Co Ltd

Address

28# Tianlongshan Road Ningbo Economic & Technology Development Zone Ningbo

Country

China

View All Listings by this Company

Range of polyethylene lined, stainless steel braided or polyamide braided hoses with various brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1912301

Expiry date:

31/12/2024

Size:

Bore Diameter DN8 End connections - 8mm to 12mm compression, ⅜”, ½” & ¾” female elbow, ⅜”, ½”, ¾”, 7/16, 9/16 female straight, ⅜”, ½”, ¾”, 7/16”, 9/16” male straight, M8 - M15 male, plug in D8 & D13.

Marking:

Neoperl logo, FLEX CORE®, WRAS, Temp rating, pressure rating, size, date of manufacture (YYMMDD) on ferrule

Installation Requirements:

R001 R008

Model:

FLEX CORE® Range: 39.06CD.EFG.HI

Factor:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim, D-79379

Country

Germany

Phone

0049 7631 1880

General Email

approvals@neoperl.de

View All Listings by this Company

Manufacturer:

Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S & Neoperl Bulgaria EOOD

Company Name

Neoperl GmbH, NPI Italia Srl, Neoperl (Xinhui) Ltd, Neoperl Nordic A/S & Neoperl Bulgaria EOOD

Address

Neoperl GmbH: Klosterrunstrasse 9-11, Müllheim, D-79379. NPI Italia Srl: Via Velleia 19, 20900 Monza, Italy.

Country

Neoperl (Xinhui) Ltd: No.3 Yanan Industrial Zone, Yamen Town, Xinhui District, Post Code 529149, Jiangmen, Guangdong, Province, China.

General Email

View All Listings by this Company

Range of EPDM hoses with either nylon or stainless-steel braiding, with or without a PVC sheath. The hoses incorporate either EPDM or silicone washers and some incorporate isolation valves (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1912006

Expiry date:

31/12/2024

Size:

See model

Marking:

SD (Zhejiang Shida Pipe Co logo), date of manufacture (YYYY) & WRAS on ferrule. Flow arrow on isolation valve

Installation Requirements:

R001

Model:

SD-DD-01(stainless-steel braided – no sheath): DN6 - F3/8”, F½”, M8X1, M8X1.25, M10X1, F15X1, M15X1. DN8 - F3/8”, F½”, F¾”, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. DN10 - F½”, F¾”, M10X1, M12X1, 15MM, 15mm valve, 22mm, 22mm valve. DN13 - F½”, F¾”, 15mm, 15mm valve, 22mm, 22mm valve. SD-DD-02 (nylon braided – no sheath) DN6 - F3/8”, F½”, M8X1, M8X1.25, M10X1, F15X1, M15X1. DN8 - F3/8”, F½”, F¾”, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. SD-DD-03 (stainless-steel braided with PVC Sheath) DN8 - F3/8”, F½”, F¾, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. SD-DD-04 (nylon braided with PVC Sheath) DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25 M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1

Manufacturer:

Zhejiang Shida Pipe Co. Ltd

Company Name

Zhejiang Shida Pipe Co. Ltd

Address

Zhitang Ind Area Chumen Yuhuna

Country

China

View All Listings by this Company

Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1906394

Expiry date:

30/06/2024

Size:

See model

Marking:

CPS, WRAS and year of manufacture (YYYY) on crimped connector

Installation Requirements:

R001

Model:

122259 DN10, 15MM COMPRESSION X 3/8" TAP CONNECTOR X 300MM 500898 DN10, 15MM COMPRESSION X 1/2" TAP CONNECTOR X 300MM 500903 DN10, 15MM COMPRESSION X 1/2" TAP CONNECTOR X 500MM 114103 DN10, 15MM COMPRESSION X 1/2" TAP CONNECTOR X 1000MM 307096 DN10, 15MM COMPRESSION VALVE X 1/2" TAP CONNECTOR X 500MM 699046 DN10, 15MM COMPRESSION VALVE X 1/2" TAP CONNECTOR X 300MM 695025 DN10, 15MM COMPRESSION X 3/4" TAP CONNECTOR X 300MM 897397 DN10, 15MM COMPRESSION X 3/4" TAP CONNECTOR X 500MM 509861 DN10, 15MM COMPRESSION X 3/4" TAP CONNECTOR X 1000MM 316637 DN8, 15MM COMPRESSION X M10 MONOBLOCK TAILS X 300MM 898868 DN10, 15MM COMPRESSION X M12 MONOBLOCK TAILS X 300MM 313144 DN10, 15MM COMPRESSION X 15MM COMPRESSION X 300MM 508022 DN10, 15MM COMPRESSION X 15MM COMPRESSION X 500M 509802 DN10, 15MM COMPRESSION X 15MM COMPRESSION X 500MM 116063 DN13, 22MM COMPRESSION X 3/4" TAP CONNECTOR X 1000MM 506150 DN13, 22MM COMPRESSION X 3/4" TAP CONNECTOR X 300MM 507681 DN13, 22MM COMPRESSION X 3/4" TAP CONNECTOR X 500MM 897436 DN13, 22MM COMPRESSION VALVE X 3/4" TAP CONNECTOR X 500MM 306887 DN13, 22MM COMPRESSION VALVE X 3/4" TAP CONNECTOR X 300MM 316600 DN13, 22MM COMPRESSION X 22MM COMPRESSION X 500MM 316628 DN13, 22MM COMPRESSION X 22MM COMPRESION X 300MM

Factor:

City Plumbing Supplies/ Plumbing Trade Supplies

Company Name

City Plumbing Supplies/ Plumbing Trade Supplies

Address

PTS HOUSE ELDON WAY CRICK

Postcode

NN6 7SL

Country

NORTHAMPTON

View All Listings by this Company

Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1906393

Expiry date:

30/06/2024

Size:

See model

Marking:

PFP, WRAS and year of manufacture (YYYY) on crimped connector

Installation Requirements:

R001

Model:

29030007 DN10, FLTC TAP CONNECTOR DOUBLE ENDED !/2" X 300MM 29030008 DN13, FLTC TAP CONNECTOR DOUBLE ENDED 3/4" X 300MM 29030011 DN10, FLTC TAP CONNECTOR 15 X 3/8" X 300MM 29030020 DN10, FLTC TAP CONNECTOR 15 X 1/2" X 300MM 29030029 DN13, FLTC TA CONNECTOR 15 X 1/2" X 300MM 29030047 DN10, FLTC TAP CONNECTOR 15 X 1/2" X 300MM + ISOVALVE 29030065 DN10, FLTC TAP CONNECTOR 15 X 1/2" X 500MM 29030074 DN13, FLTC TAP CONNECTOR 15 X 1/2" X 500MM 29030083 DN10, FLTC TAP CONNECTOR 15 X 1/2" X 500MM & ISOVALVE 29030101 DN10, FLTC T/CON 15 X 1/2" X 900MM 29030104 DN10, FLTC T/CON 15X 1/2" X 1000MM 29030110 DN13, FLTC TAP CONNECTOR 15 X 1/2" X 900MM 29030119 DN10, FLTC TAP CONNECTOR 15 X 3/4" X 300MM 29030128 DN13, FLTC TAP CONNECTOR 15 X 3/4" X 300MM 29030137 DN10, FLTC TAP CONNECTOR 15 X 3/4" X 500MM 29030141 DN10, FLTC TAP CONNECTOR 15 X 3/4" X 1000MM 29030146 DN13, FLTC TAP CONNECTOR 15 X 3/4" X 500MM 29030155 DN13, FLTC TAP CONNECTOR 22 X 3/4" X 300MM 29030164 DN19, FLTC TAP CONNECTOR 22 X 3/4" X 300MM 29030182 DN13, FLTC TAP CONNECTOR 22 X 3/4" X 300MM & ISOVALVE 29030191 DN13, FLTC TAP CONNECTOR 22 X 3/4" X 500MM 29030200 DN19 FLTC, TAP CONNECTOR 22 X 3/4" X 500MM 29030209 DN13, FLTC TAP CONNECTOR 22 X 3/4" X 500MM & ISOVALVE 29030218 DN13, FLTC T/CON 22 X 3/4" X 900MM 29030221 DN13, FLTC T/CON 22 X 3/4" X 1000MM 29030227 DN19, FLTC TAP CONNECTOR 22 X 3/4" X 900MM 29030236 DN10, FLCC TUBE2TUBE 15 X 15 X 300MM 29030245 DN13, FLCC TUBE2TUBE 15 X 15 300MM 29030254 DN10, FLCC TUBE2TUBE 15 X 15 X 300MM & ISOVALVE 29030272 DN10, FLCC TUBE2TUBE 15 X 15 X 500MM 29030281 DN13, FLCC TUBE2TUBE 15 X 15 X 500MM 29030290 DN13, FLCC TUBE2TUBE 22 X 22 X 300MM 29030308 DN8, FLTT TAP TAIL M10 X 15MM X 300MM 29030317 DN10, FLTT TAP TAIL M12 X 15MM X 300MM 29030400 DN10, FLTC TAP CONNECTOR PUSHFIT 15 X 1/2" X 300MM 29030402 DN10, FLTC TAP CONNECTOR PUSHFIT 15 X 1/2" X 500MM 29030404 DN10, FLTC TAP CONNECTOR PUSHFIT 15 X3/4" 300MM 29030406 DN13, FLTC TAP CONNECTOR PUSHFIT 22 X 3/4" X 300MM 29030408 DN10, FLTC TAP CONNECTOR PUSH FIT 15 X !/2" X 300MM & ISOVALVE 29030410 DN10, FLTC TAP CONNECTOR PUSHFIT 15 X 15 X 300MM 88107021 DN10, ALTECH 15MM X 1/2 INCH FLEX TAP CONNECTOR 30MM 88107119 DN10, ALTECH 15MM X 3/4" FLEX TAP CONNECTOR 300MM 88107156 DN13, ALTECH 22MM X 3/4" FLEX TAP CONNECTOR 300MM 88107047 DN10, ALTECH 15MM X 1/2" FLEX TAP CONNECTOR C/W ISOVALVE 300MM 88107182 DN13, ALTECH 22MM X 3/4" FLEX TAP CONNECTOR C/W ISOVALVE 300MM 88107065 DN10, ALTECH 15MM X 1/2 " FLEX TAP CONNECTOR 500MM 88107236 DN10, ALTECH 15MM X 15MM FLEXIBLE TAP CONNECTOR 300MM 88107308 DN8, ALTECH 15MM X 10MM FLEXIBLE TAP TAILS 300MM 88107317 DN10, ALTECH 15MM X 12MM FLEXIBLE TAP TAILS 300MM 88107321 DN10, ALTECH 15MM X 1/2" F/T CONNECTOR P/F C/W ISOVALVE 300MM 88107325 DN13, ALTECH 22MM X 3/4" F/T CONNECTOR P/F C/W ISOVALVE 300MM 00107020 DN10, ECONOMY 15MM X 1/2" F/TAP CONNECTOR 300MM 00107155 DN13, ECONOMY 22MM X 3/4" F/TAP CONNECTOR 300MM 10000201 DN10, COMPRESSION CONNECTOR 15 X 15 X 1000MM 10000202 DN13, COMPRESSION CONNECTOR 22 X 22 500MM

Factor:

Primaflow Ltd

Company Name

Primaflow Ltd

Address

Unit 2 Stargate Business Park Cuckoo Road Nechells

Postcode

B7 5SE

Country

Birmingham

Phone

+44 (0) 800 694 5000

View All Listings by this Company

Range of CLICK SEAL stainless-steel braided hoses, incorporating a dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. CLICK SEAL 1TF500UKCS incorporates a servicing valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1911062

Expiry date:

30/11/2024

Note:

See model

Size:

see model

Marking:

FLUIDMASTER, WRAS & DATE OF MANUFACTURE (YYYY) ON FERRULE

Installation Requirements:

R001

Model:

CLICK SEAL 1TF300UKCS – 15mm compression x ½” BSP (F). CLICK SEAL 1TF500UKCS – 15mm compression x ½” BSP (F). CLICK SEAL 1TF300UKCSV – 15mm compression x ½” BSP (F).

Factor:

Fluidmaster UK

Company Name

Fluidmaster UK

Address

Twyford Road Rotherwas Industrial Estate Hereford

Postcode

HR2 6JR

View All Listings by this Company

Range of Stainless steel braided, Nylon braided, double locked (metal outer) or reinforced, PEX lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections depending on model. Open outlet use only. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003700

Expiry date:

31/03/2025

Size:

OD 26.50mm

Marking:

SEDAL On body.

Installation Requirements:

R001

Model:

09KH05 (1157164)

Manufacturer:

Kaiping Sedal Tap Components Co Ltd

Company Name

Kaiping Sedal Tap Components Co Ltd

Address

Floor 1,3,and Part of Floor 2, No.2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong province, China

Phone

+86-750-2728598

View All Listings by this Company

Range of Stainless steel braided, Nylon braided, double locked (metal outer) or reinforced, PEX lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections depending on model. Open outlet use only. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2001070

Expiry date:

31/01/2025

Size:

Available with either M8, M10, M12, M15, M16, 1/2", 3/8”, 9/16”, 5/16”, 3/4", 1/4", 11/16” & 1/8” BSP end connections

Marking:

WRAS, YS Date of manufacture (YYMM) on ferrule.

Installation Requirements:

R001

Model:

2012 XX SS DNX A×B LXXXX (stainless steel nature colour only ) 2012 XX LL DNX A×B LXXXX (available with black and grey colour) 2012 XX T DNX A×B LXXXX (available with black, grey and transparent colour) 2012 XX S DNX A×B LXXXX (available with black, chrome, golden, bronze, nickel and white colour) ‘2012’ series hose naming Rule: 2012 XX X DNX A×B LXXXX ◆20=series name 12=inner hose material: PEX ◆First two XX denotes colour of exterior hose and replaced by: BK= black, GY=grey, YS=transparent, WH=white, GO=golden, CP=chrome, BR=bronze, BN=nickel, blank is stainless nature. ◆Third X denotes exterior hose and replaced by: T=reinforced hose, LL=nylon braided sheath, SS=stainless steel braided sheath, S=double lock hose ◆DNX =DN6 or DN8 or DN10, denotes nominal diameter of inner hose ◆A×B =size of hose end connector(refer to size) ◆LXXXX=length of hose(200 to 2500mm) Colours added to exterior hose on April 2023 RE=red, BL=blue, SS=stainless nature, ORB=oil rubbed bronze, AC=antique copper plated

Manufacturer:

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Company Name

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Address

41th Building, No.1777 Jilong Road, Tongan Industrial Zone (Huli), Xiamen, Fujian, 361100

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2001094

Expiry date:

31/01/2025

Size:

See model

Marking:

FF WRAS Size (DN) Year (YY)

Installation Requirements:

R001

Model:

The article number is built as follows: 20.XXXX.XXXX.W , 25.XXXX.XXXX.W & 820.XXXX.XXXX.W 20.1032 => Combination of diameter of the hose and connections XXXX => Stands for the length of the hose. Possible lengths are between 150 and 2000mm W => is the indicator for a WRAS hose

Manufacturer:

FixaFlex

Company Name

FixaFlex

Address

Kasteelstraat 15 8880 Zonnebeke Belgium

Phone

0032 57 46 84 50

View All Listings by this Company

Range of brass or stainless steel double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1904081

Expiry date:

30/04/2024

Size:

For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2

Marking:

DOLPHIN LOGO (D) ON FERRULE

Installation Requirements:

R001

Model:

Dolphin Blue DB30ab.ccc.d.ee "a" Identifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: DB303x. for brass material DB304x. for stainless steel material "b" Identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a9. "ccc" Identifies the length range of the metal interlocked hose from 500mm "DB30ab.200" "d" Identifies the external finish to the metal parts from "DB30ab.ccc.1 to DB30ab.ccc.9": "1" denotes brushed/satin polished "2" denotes mirror polished "3" denotes brushed/satin polished with PVD coating "4" denotes mirror polished with PVD coating "5" denotes powder coated "6 - 9" to denote other material and finish optoins that may be available in the future "ee" indicates the colour of PVD or powder coat that has been applied from "DB30ab.ccc.d.00" to "DB30ab.ccc.d.99"

Factor:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. The FLIS1512P and FLIS2234P models incorporate an isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2001053

Expiry date:

31/01/2025

Size:

See model

Marking:

IDC Plumbing & Heating Technology (Beijing) Ltd. logo (~E~ within a circle), WRAS, year of manufacture (YYYY) and size on crimped connector.

Installation Requirements:

R001

Model:

FLX1512P: G1/2 ×15mm push-fit (DN10). FLX1534P: G3/4 × 15mm push-fit (DN10). FLX2234P: G3/4 × 22mm push-fit (DN13). FLX1515P: 15mm push-fit × 15mm push-fit (DN10). FLX2222P: 22mm push-fit × 22mm push-fit (DN13). FLIS1512P: G1/2 × 15mm push-fit ISO valve (DN10). FLIS2234P: G3/4 × 22mm push-fit ISO valve (DN13).

Factor:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100016

Country

China

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless steel braided EPDM lined flexible hose assemblies with EPDM seals and plastic filters, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003328

Expiry date:

31/03/2025

Marking:

MFX, WRAS & date of manufacture (WW/YY) on ferrule.

Installation Requirements:

R001 R120

Model:

MET INOX FFC: ¾” (F) x ¾” (F). MET INOX FM: ¾” (F) x ¾” (M).

Manufacturer:

Miflex 2 SpA.

Company Name

Miflex 2 SpA.

Address

SP 7 PER LESMO NO 4 20852 VILLASANTA MB ITALY

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM washers and plastic filters. The MAK INOX FFC model incorporates an elbow connection. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003329

Expiry date:

31/03/2025

Marking:

MFX, date of manufacture (WW/YY) temperature, pressure, MAK INOX & WRAS on ferrule.

Installation Requirements:

R001 R120

Model:

MAK INOX FFC: ¾” (F) x ¾” (F) elbow. MAK INOX FM: ¾” (F) x ¾” (M).

Manufacturer:

Miflex 2 SpA.

Company Name

Miflex 2 SpA.

Address

SP 7 PER LESMO NO 4 20852 VILLASANTA MB ITALY

View All Listings by this Company

Shower hose with a PVC liner and stainless steel interlocked outer casing. Maximum operating temperature 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003334

Expiry date:

31/03/2025

Note:

Open outlet use only.

Size:

½” BSP (F) x ½” BSP (F) captive nut

Marking:

Jiasiya, WRAS production year YYYY on ferrule.

Installation Requirements:

R001

Model:

BX03

Factor:

Kaiping Jiasiya Sanitary Ware Co, Ltd.

Company Name

Kaiping Jiasiya Sanitary Ware Co, Ltd.

View All Listings by this Company

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003346

Expiry date:

31/03/2025

Note:

Open outlet use only.

Size:

½” BSP Captive nut.

Marking:

PPI on ferrule.

Installation Requirements:

R001

Model:

SH1-2-1500-B-PVC-MBK1 (DN10), SH1-2-1500-PVC-MBK1 (DN8).

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Stainless steel braided hose having an EPDM liner and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003363

Expiry date:

31/03/2025

Size:

½” BSP (F) captive nut x 10mm

Marking:

Jiasiya, WRAS & year of production (YYYY) on nut.

Installation Requirements:

R001

Model:

B404-A

Factor:

Kaiping Jiasiya Sanitary Ware Co, Ltd.

Company Name

Kaiping Jiasiya Sanitary Ware Co, Ltd.

View All Listings by this Company

Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2005332

Expiry date:

31/05/2025

Size:

Please refer to model.

Marking:

HRN (trade-mark of APIS (Xiamen) Co. Ltd.), WRAS & date of manufacture (MM/YY) on ferrule.

Installation Requirements:

R001 R008

Model:

135-AB-C-D-E-F The letters denote the following: AB = length and is replaced with 02 (90mm) - 83 (2519mm). C = type of braiding and is replaced with 01 = SUS (Stainless Steel) or 02 = Nylon. D = inlet connection size and is replaced with: 01 = F1/2, 02 = M1/2, 03 = F9/16, 04 = M9/16, 07 = CRN1 Pushfit (F), 10 = M10, 11 = H1 Pushfit (F). E = outlet connection size and is replaced with: 05 = F3/8, 06 = M3/8, 08 = CRN2 Pushfit (M) & 09 = M8. F = bore diameter size and is replaced with 6 = DN6.

Factor:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of stainless steel braided, PEX lined hoses incorporating various brass end connection configuration options. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2005316

Expiry date:

31/05/2025

Note:

Please note that DN6 & DN8 hoses are manufactured at all sites. DN10, DN13 & DN15 hoses are manufactured only by NPI Italia Srl. & Neoperl Nordic A/S.

Size:

Bore diameters DN6 & DN8 may be supplied with the following end connections: Female elbow ⅜, ½, ¾”. Female ⅜, ½, ¾, 7/16, 9/16”. Tube ø8 - ø12. Male M8, M10, M12, M15. Male ⅜, ½, ¾, 7/16, 9/16”. Comp. joint ø8 - ø15. Plugin D7- D13. Bore diameter DN10 may be supplied with the following end connections: Female elbow ½, ¾”. Female ½, ¾, 1”. Tube ø8 - ø15. Male M8, M10, M12, M15. Male ½, ¾, 1”. Bore diameter DN13 may be supplied with the following end connections: Female elbow ¾”. Female ¾, 1”. Male ¾, 1”. Bore diameter DN15 may be supplied with the following end connections: Female 1”. Male 1”. Models added July 2021: Male M11 Bore diameter DN10 supplied with the following end connections: Female elbow 3/8”, Female 3/8”, Male 3/8” DN13 supplied with the following end connections: Female elbow ½ Female ½, Tube ø15, Male ½ DN15 supplied with the following end connections: Female elbow ¾ Female ¾, Tube ø15, Male ½, ¾

Marking:

Neoperl, SPX or (from January 2020) Softpex, 70°C, 10bar, DN, size & date of manufacture (YYMMDD) on end connection.

Installation Requirements:

R001 R008

Model:

39.00CD.EFG.HI Softpex® range. Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type (supply hose, outlet hose, shower hose etc.). B = Hose (inliner) Material CD.EFG = Manufacturing sequential number. HI = Packaging information.

Factor:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim, D-79379

Country

Germany

Phone

0049 7631 1880

General Email

approvals@neoperl.de

View All Listings by this Company

Manufacturer:

Neoperl GmbH, NPI Italia Srl. Neoflex (Xinhui) Ltd. NEOPERL Nordic A/S. Neoperl Bulgaria EOOD, Neoperl Ibérica S.A.

Company Name

Neoperl GmbH, NPI Italia Srl. Neoflex (Xinhui) Ltd. NEOPERL Nordic A/S. Neoperl Bulgaria EOOD, Neoperl Ibérica S.A.

Address

Klosterrunstrasse 9-11, Mullheim, D-79379

General Email

View All Listings by this Company

Range of stainless-steel braided hoses incorporating a TPSiV liner. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2006017

Expiry date:

30/06/2025

Size:

Bore diameters: DN6, DN8 & DN10. End connections: 3/8”, captive nut ½” captive nut, M8 & M10

Marking:

Jetom, WRAS and date of manufacture (YYYY) on ferrule

Installation Requirements:

R001 R008

Model:

H51C8, H51HW, H51U4, H51E3, H5CC8, H5CHW, H5CU4, H5CE3, H5438 & H54A3.

Manufacturer:

Quanzhou Jetom Hose Industry Co.,Ltd

Company Name

Quanzhou Jetom Hose Industry Co.,Ltd

Address

No. 1, South Road, High-tech Industrial Park, Luncang Town, Nan'an City, Fujian

View All Listings by this Company

Lux range of DN18 stainless steel braided silicone lined hose assemblies with various brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2006309

Expiry date:

30/06/2025

Size:

See model

Marking:

LUX, date of manufacture (MM/YY) size, temp, pressure and WRAS on ferrule.

Installation Requirements:

R001 R008

Model:

Luxor Silicone Line Max length : 3000 mm End connections (one or both sides): Male: 3/4" BSP male; 1" BSP male, Female (captive nut) without gasket: 3/4" BSP Female; 1" BSP Female; Female elbow (captive nut) without gasket: 3/4" BSP female elbow; Plug-in: straight pipe ( 22 mm )

Manufacturer:

Luxor Spa

Company Name

Luxor Spa

Address

25018 Montichiar (Bresac) Via Madonna 94 ITALY

View All Listings by this Company

Stainless steel inter-locked shower hoses with EPDM lining and various finishes. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909419

Expiry date:

30/09/2024

Note:

Open outlet use only.

Size:

½ BSP (F)

Marking:

NABIS on ferrule

Installation Requirements:

R001

Model:

A05052 NAB 1.5M & A05053 NAB 1.75M inter-locking shower hoses

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court, Warwick Technology Park, Gallows Hill, Warwick

Postcode

CV34 6DY

Phone

01926 705000

View All Listings by this Company

Range of stainless steel braided PEX lined flexible hose assemblies with brass end connections and EPDM o ring and washers with various end connections options. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909416

Expiry date:

30/09/2024

Size:

M8, M10, M12, M15, F3/8”, F1/2, F3/4”, F15, 3/8” BSP(M), 1/2” BSP (M), 3/4”BSP (M)

Marking:

WRAS, JESTO, date of manufacture (YYYY) on crimped connection.

Installation Requirements:

R001 R008

Model:

JESTO-PEX flexible hose assemblies

Factor:

Jesto (Italy Standard) Limited

Company Name

Jesto (Italy Standard) Limited

View All Listings by this Company

Stainless steel inter-locked shower hoses with EPDM lining and various finishes. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909418

Expiry date:

30/09/2024

Note:

Open outlet use only.

Size:

½ BSP (F)

Marking:

Aqualisa on ferrule

Installation Requirements:

R001

Model:

ACY1008 inter-locking shower hoses

Factor:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

01959 560 000

General Email

marketing@aqualisa.com

View All Listings by this Company

Range of EPDM or PEX inner, stainless steel flexible hoses with EPDM gaskets. Maximum working temperature is 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2007307

Expiry date:

31/07/2025

Note:

Open outlet use only.

Size:

1/2” BSP (M), M15x1”

Marking:

Hualing, WRAS & year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001 R040

Model:

HLDT-XX-XX-XXX-XXX-XXX The 1st and 2nd XX: Connection sizes: 01=F½”, 02=M15x1” The 1st XXX: Hose size: 013=DN13, 014=DN14 The 2nd XXX: Hose length: 50cm~200cm The 3rd XXX: Inner hose material: 001=EPDM, 002=PEX.

Factor:

Kaiping City Hualing Hoses Co.,Ltd

Company Name

Kaiping City Hualing Hoses Co.,Ltd

Address

No 42 Jinshan Road Shagang Industrial Park Shuikou Town

Postcode

China

Country

Kaiping City

View All Listings by this Company

‘TAQ PEX’ range of PEX lined flexible hose assemblies with either stainless steel braiding or grey polymeric (PET - Polyethylene terephthalate) braiding (ACB suffix models). Models have either EPDM ‘O’-rings and/or EPDM or silicone washers (depending on end connection). Models are also available with an optional washer incorporating a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012802

Expiry date:

31/12/2025

Size:

See model.

Marking:

Tucai, WRAS, year of manufacture (YY), manufacturing company (NT or TB) on ferrule.

Installation Requirements:

R001 R008

Model:

TAQ PEX DN6 Hose bore = DN6, Braiding = SS. End connections = M8x1, M10x1, M15x1, M15x1 captive nut, 3/8" captive nut, ½" captive nut, pipe end 10mm (LISO 10), clip 10, clip 11, M11x1, H 3/8" valv, M12x1, compression fitting 10mm, compression fitting 15mm, 3/8" BSP, 7/16UNS, clip 9, 9/16-24UNEF captive nut, 1/2-14 NPSM captive nut. TAQ PEX DN6 ACB Hose bore = DN6, Braiding = ACB. End connections = M8x1, M10x1, M15x1, M15x1 captive nut, 3/8" captive nut, ½" captive nut, pipe end 10mm (LISO 10), clip 10, clip 11, M11x1, H 3/8" valv, M12x1, 3/8" BSP, 7/16UNS, clip 9, 9/16-24 UNEF captive nut,1/2-14 NPSM captive nut. TAQ PEX Hose bore = DN8, Braiding = SS. End connections = M10X1, M12x1, M15x1, 3/8" captive nut, ½" captive nut, M15X1 captive nut, 3/8" BSP, ½" BSP, compression fitting 10mm, compression fitting 12mm, compression fitting 15mm, pipe end 10mm (LISO10), pipe end 15mm, 3/8'' Elbow, ½'' elbow, clip 10, clip 11, M8X1, 1/8-27 NPSM, M11x1, F ¾'' , 7/16-24 UNS. TAQ PEX ACB Hose bore=DN8, Braiding = ACB. End connections = M10X1, M12x1, M15x1, 3/8" captive nut, ½" captive nut, M15X1 captive nut, 3/8" BSP, ½" BSP, compression fitting 10mm, compression fitting 12mm, compression fitting 15mm, pipe end 10mm (LISO10), pipe end 15mm, 3/8'' elbow, ½'' elbow, clip 10, clip 11, M8X1, 1/8-27 NPSM, M11x1, F ¾'', 7/16-24 UNS. Models added March 2022: TAQ PEX DN6 Hose bore = DN6, Braiding = SS. End connections = ½” BSP (M), M8x1.25, CLIP 8, pipe end 9.6mm (LISO 9.6), pipe end 8mm (LISO 8). TAQ PEX DN6 ACB Hose bore = DN6, Braiding = ACB. End connections = ½” BSP (M), M8x1.25, CLIP 8, pipe end 9.6mm (LISO 9.6), pipe end 8mm (LISO 8). TAQ PEX Hose bore = DN8, Braiding = SS. End connections = Elbow nut ¾” captive nut, M16x1, pipe end 8mm (LISO 8). TAQ PEX ACB hose bore = DN8, Braiding = ACB. End connections = Elbow nut ¾” captive nut, M16x1, pipe end 8mm (LISO 8).

Factor:

Tucai S.A.

Company Name

Tucai S.A.

Address

Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)

Country

Spain

Phone

+34 93 718 95 62

General Email

info@tucai.com

View All Listings by this Company

Manufacturer:

Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.

Company Name

Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.

Address

Ningbo Tucai Flexible Pipe Co., Ltd. : No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450 (China) TUCAI BULGARIA, Spdl. Ltd.: 7538 Aydemir Village, 39 Chernozem Street, Silistra Region (Bulgarie)

General Email

View All Listings by this Company

‘C5’ range of stainless-steel braided EPDM lined flexible hoses. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves or stainless-steel strainers. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909417

Expiry date:

30/09/2024

Note:

R008 applies to natural models only

Size:

see model

Marking:

Qualflex, QWRAS, date of manufacture (month code and year YY) and operating parameters on ferrule.

Installation Requirements:

R001 R008

Model:

C54407: CB WRAS P/FIT FLEX TAP CONNS 15 X 1/2 C54408: CB WRAS P/FIT FLEX TAP CONNS 15 X 3/4 C54409: CB WRAS P/FIT FLEX TAP CONNS 22 X 3/4 C54410: CB P/FIT ISO FLEX TAP CONNS 15 X 1/2 C54411: CB P/FIT ISO FLEX TAP CONNS 22 X 3/4 C54415: CB P/FIT 15 X 15 FLEX TAP CONNS

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Manufacturer:

Hydralectric Ltd.

Company Name

Hydralectric Ltd.

Address

5 High Road Byfleet Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

View All Listings by this Company

Range of stainless steel braided PE-X lined flexible hose assemblies incorporating NBR washers and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012020

Expiry date:

31/12/2025

Size:

See model.

Marking:

Finial Plumbing logo (I>J), date of manufacture (YYYY), WRAS and DN size on ferrule.

Installation Requirements:

R001 R008

Model:

DN8 bore: Finial-DN8-01 - Stainless steel braided PEX hose F3/8*M3/8 (DN8) 10~200cm: ⅜” BSP (F) x ⅜” BSP (M). Finial-DN8-02 - Stainless steel braided PEX hose F3/8*M10x1 (DN8) 10~200cm: ⅜” BSP (F) x M10. Finial-DN8-03 - Stainless steel braided PEX hose F1/2*M1/2 (DN8) 10~200cm: ½” BSP (F) x ½” BSP (M). Finial-DN8-04 - Stainless steel braided PEX hose F1/2*M10x1 (DN8) 10~200cm: ½” BSP (F) x M10. Finial-DN8-05 - Stainless steel braided PEX hose F1/2*F1/2 (DN8) 10~200cm: ½” BSP (F) x ½” BSP (F). Finial-DN8-06 - Stainless steel braided PEX hose F1/2*M12x1 (DN8) 10~200cm: ½” BSP (F) x M12. Finial-DN8-07 - Stainless steel braided PEX hose F1/2*M15x1 (DN8) 10~200cm: ½” BSP (F) x M15. Finial-DN8-08 - Stainless steel braided PEX hose F3/8*F1/2 (DN8) 10~200cm: ⅜” BSP (F) x ½” BSP (F). Finial-DN8-09 - Stainless steel braided PEX hose 15mm compression*M10x1 (DN8) 10~200cm: 15mm compression x M10. Finial-DN8-10 - Stainless steel braided PEX hose 15mm compression*M12x1 (DN8) 10~200cm: 15mm compression x M12. DN10 bore: Finial-DN10-01 - Stainless steel braided PEX hose F1/2*F1/2 (DN10) 10~200cm: ½” BSP (F) x ½” BSP (F). Finial-DN10-02 - Stainless steel braided PEX hose F1/2*M12x1 (DN10) 10~200cm: ½” BSP (F) x M12. Finial-DN10-03 - Stainless steel braided PEX hose F1/2*M1/2 (DN10) 10~200cm: ½” BSP (F) x ½” BSP (M). Finial-DN10-04 - Stainless steel braided PEX hose F3/4*F3/4 (DN10) 10~200cm: ¾” BSP (F) x ¾” BSP (F). All hoses are available in lengths of 10 to 200cm.

Manufacturer:

Finial Plumbing Co., Ltd.

Company Name

Finial Plumbing Co., Ltd.

Address

No 36-38, Siqian Development Zone, Shuikou Town, Kaiping City

Country

Guangdong Province,

Phone

86-750-2729525

View All Listings by this Company

Range of stainless steel braided EPDM lined hose assemblies with EPDM O-rings and some models incorporate a servicing valve. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012032

Expiry date:

31/12/2025

Size:

SEE MODEL

Marking:

GCE, WRAS, size and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

DN17) HD125A/15W: 300mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD225A/15W: S00mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD325A/15W: 1000mmxl/2" BSP Captive Nut x 15mm Push Fit (DN17) HD425A/15W: 150mm 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD125B / 22W: 300mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD225B / 22W: 500mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD325B / 22W: 1000mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN13) HD125G / 15W: 300mm M12 x 15mm Push fit Monobloc (DN17) HD125H / 300mm x 15W 15mm Push Fit X 15mm Push Fit (DN17) HD225H / 500mm x 15W 15mm Push Fit X 15mm Push Fit (DN13) HD125F/15W: 300mm M10 x 15mm Push fit Monobloc (DN17) HD125H/22W:300mm22mm Push fit 22mm Push fit (DN17) HD225H/22W:500mm 22mm Push fit 22mm Push fit (DN17) HD125D/15W: 15mm Push fit x 1/2" BSP Captive Nut Elbow (DN17) HDW125E/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HDW225E/15W: 500mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HD125EH/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve Handle

Factor:

Wavin UK

Company Name

Wavin UK

Address

Hazelhead Crow Edge Sheffield

Postcode

S36 4HG

View All Listings by this Company

Range of brass or stainless steel double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1904083

Expiry date:

30/04/2024

Size:

See model.

Marking:

IL FLESSIBILE di Nicastri & C. S.r.l. logo ‘ilF’, WRAS and year of manufacture (YY) on ferrule.

Installation Requirements:

R001

Model:

01601 : For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2 Surface finishes: Raw Chromed Electropolished Polished Gold Bronze Copper Nickel ACR White Black Red Grey Silver Old brass Beige Green Yellow Orange Champagne Fumé Black metal Gun metal

Factor:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

General Email

gessi@gessi.it

View All Listings by this Company

Manufacturer:

IL Flessibile di Nicastri & C. S.r.l.

Company Name

IL Flessibile di Nicastri & C. S.r.l.

Address

General Email

View All Listings by this Company

Range of brass or stainless steel (added January 2020) double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1904084

Expiry date:

30/04/2024

Size:

See model.

Marking:

IL FLESSIBILE di Nicastri & C. S.r.l. logo ‘ilF’, WRAS and year of manufacture (YY) on ferrule.

Installation Requirements:

R001

Model:

120MM – CONNECTIONS ½”: F2020CR CHROME F2020CN BLACK CHROME F2020CS BRUSHED BLACK CHROME F2020SN BRUSHED NICKEL F2020BS MATT WHITE F2020NS MATT BLACK F2020BR ANTIQUE BRONZE F2020RA ANTIQUE COPPER F2020OR GOLD F2020OS BRUSHED GOLD 150MM – CONNECTIONS ½”: F2021CR CHROME F2021CN BLACK CHROME F2021CS BRUSHED BLACK CHROME F2021SN BRUSHED NICKEL F2021BS MATT WHITE F2021NS MATT BLACK F2021BR ANTIQUE BRONZE F2021RA ANTIQUE COPPER F2021OR GOLD F2021OS BRUSHED GOLD 200MM – CONNECTIONS ½” F2022CR CHROME F2022CN BLACK CHROME F2022CS BRUSHED BLACK CHROME F2022SN BRUSHED NICKEL F2022BS MATT WHITE F2022NS MATT BLACK F2022BR ANTIQUE BRONZE F2022RA ANTIQUE COPPER F2022OR GOLD F2022OS BRUSHED GOLD MODELS ADDED SEPTEMBER 2022: F2020INOX.WR 120 MM – INOX – CONNECTION 1/2" F2021INOX.WR 150 MM – INOX – CONNECTION 1/2" F2022INOX.WR 200 MM – INOX – CONNECTION 1/2"

Factor:

Fima Carlo Frattini SPA

Company Name

Fima Carlo Frattini SPA

Country

Italy

Phone

0039 0322 9549

View All Listings by this Company

Manufacturer:

IL Flessibile di Nicastri & C. S.r.l.

Company Name

IL Flessibile di Nicastri & C. S.r.l.

Address

View All Listings by this Company

Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2107803

Expiry date:

31/07/2026

Size:

See model

Marking:

FQR, year of manufacture (YY) DN & WRAS on ferrule.

Installation Requirements:

R001

Model:

DN6 – DN6W, P6W series: 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN8 – DN8W, P9W series: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN10 – DN10W series: 12x1, F3/8”, F1/2”, F¾”, M3/8”, M1/2”, NPB15, 15c.o, F1/2” c/curva, FC1/2” DN13 – DN13W series: F1/2” F¾”, M1/2”, M3/4, F1/2” c/curva

Manufacturer:

F.Q.R. Frattini S.R.L.

Company Name

F.Q.R. Frattini S.R.L.

Address

Via Per Borgomanero 71 28010 Briga Novarese (No)

Country

Italy

Phone

+39 0322 94100

View All Listings by this Company

UWILL range of PVC and PEX lined shower hoses (model UW-MS1003 is PEX lined), (models UW-MS1003 and UW-MS1005) incorporate corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2108803

Expiry date:

30/06/2026

Note:

Open outlet use only.

Size:

½” captive nut end connections

Marking:

UWILL, WRAS, Year of manufacture (YYYY)

Installation Requirements:

R001

Model:

UW-MS1003XX UW-MS1005XX UW-SC2003 End connector size for all models is G1/2 XX means the different outer finish ,XX=01,02,03,04,05,06： 01=CP chrom plating 02=EA electropolishing 03=Brushed nickel plating 04=ORB 05=matte black 06= Natural Brass

Manufacturer:

Xiamen Uwill Sanitary Ware Co. Ltd.

Company Name

Xiamen Uwill Sanitary Ware Co. Ltd.

Address

3rd Floor, No. 82th Building, Guankouzhonglu, Jimei District

Country

Xiamen,

View All Listings by this Company

Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2104339

Expiry date:

30/04/2026

Note:

R008 applies to hoses fitted with white plastic push fittings.

Size:

See model.

Marking:

Kingfisher brand logo, WRAS & date of manufacture (YY) on ferrule

Installation Requirements:

R001 R008

Model:

FLOMASTA: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) FLOMASTA: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.

Factor:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 PaddingtonSquare, London

Postcode

W2 6PX

View All Listings by this Company

Range of brass or stainless steel (added January 2020) double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1904090

Expiry date:

30/04/2024

Size:

See model.

Marking:

IL FLESSIBILE di Nicastri & C. S.r.l. logo ‘ilF’, WRAS and year of manufacture (YY) on ferrule.

Installation Requirements:

R001

Model:

F2020CR.WR 120mm double braided flex hose - connection ½” chrome F2020CN.WR 120mm double braided flex hose - connection ½” black chrome F2020CS.WR 120mm double braided flex hose - connection ½” black brushed chrome F2020SN.WR 120mm double braided flex hose - connection ½” brushed nickel F2020BS.WR 120mm double braided flex hose - connection ½” matt white F2020NS.WR 120mm double braided flex hose - connection ½” matt black F2020BR.WR 120mm double braided flex hose - connection ½” brushed bronze F2020RA.WR 120mm double braided flex hose - connection ½” brushed copper F2020OR.WR120mm double braided flex hose - connection ½” gold F2020OS.WR 120mm double braided flex hose - connection ½” brushed gold F2020INOX.WR 120mm double braided flex hose - connection ½” inox F2021CR.WR 150mm double braided flex hose - connection ½” chrome F2021CN.WR 150mm double braided flex hose - connection ½” black chrome F2021CS.WR 150mm double braided flex hose - connection ½” black brushed chrome F2021SN.WR 150mm double braided flex hose - connection ½” brushed nickel F2021BS.WR 150mm double braided flex hose - connection ½” matt white F2021NS.WR 150mm double braided flex hose - connection ½” matt black F2021BR.WR 150mm double braided flex hose - connection ½” brushed bronze F2021RA.WR 150mm double braided flex hose - connection ½” brushed copper F2021OR.WR 150mm double braided flex hose - connection ½” gold F2021OS.WR 150mm double braided flex hose - connection ½” brushed gold F2021INOX.WR 150mm double braided flex hose - connection ½” inox F2022CR.WR 200mm double braided flex hose - connection ½” chrome F2022CN.WR 200mm double braided flex hose - connection ½” black chrome F2022CS.WR 200mm double braided flex hose - connection ½” black brushed chrome F2022SN.WR 200mm double braided flex hose - connection ½” brushed nickel F2022BS.WR 200mm double braided flex hose - connection ½” matt white F2022NS.WR 200mm double braided flex hose - connection ½” matt black F2022BR.WR 200mm double braided flex hose - connection ½” brushed bronze F2022RA.WR 200mm double braided flex hose - connection ½” brushed copper F2022OR.WR 200mm double braided flex hose - connection ½” gold F2022OS.WR 200mm double braided flex hose - connection ½” brushed gold F2022INOX.WR 200mm double braided flex hose - connection ½” inox For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2

Factor:

Fima Carlo Frattini SPA

Company Name

Fima Carlo Frattini SPA

Country

Italy

Phone

0039 0322 9549

View All Listings by this Company

Manufacturer:

IL Flessibile di Nicastri & C. S.r.l.

Company Name

IL Flessibile di Nicastri & C. S.r.l.

Address

View All Listings by this Company

‘PARINOX/STRONGFLEX S-200' range of stainless-steel braided EPDM lined flexible hose with various end connections (see model). Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2201803

Expiry date:

31/01/2027

Size:

Hose sizes DN6: 15x1 (F) elbow, ⅜” and ½” BSP (F), 15x1 (F), Tube TL ø10mm, Male MOK M8 and M10, ⅜” and ½” BSP (M). Hose sizes DN8: ⅜” and ½” BSP (F) elbow, ⅜” and ½” BSP (F), Tube TL ø10mm, Male MOK M10 and M15, ⅜” and ½” BSP (M), Comp. joint ø10mm and ø12mm. Hose sizes DN10: ½” and ¾” BSP (F) elbow, ⅜”, ½” and ¾” BSP (F), Tube TL ø15mm, Male MOK M12, ⅜”, ½” and ¾” BSP (M), Comp. joint ø15mm. Hose sizes DN13: ½” and ¾” BSP (F) elbow, ½” and ¾” BSP (F), ½” and ¾” BSP (M), Tube TL ø15mm, Comp. joint ø15mm.

Marking:

PARINOX, WRAS, DN, maximum temperature, maximum pressure, and date of manufacture (YYMM) on crimp connection.

Installation Requirements:

R001

Model:

‘Parinox range: Part Code nomenclature constructed in the following manner: AAA.BBBBBB.CCC AAA = braiding specification including configuration of colour bands: DN6 = 288, R88, B88. DN8 - 287, R87, B87. DN10 = 282, R82, B82. DN13 = 283. BBBBBB = Manufacturing alphanumeric string. CCC = Length of the hose in mm: 500 = 500mm, U20 = 1200mm, D50 = 2500mm, T50 = 3500mm, Q00 = 4000mm. Models added 04/01/2024 Strongflex S-200 range: SF - 200 DN6 SF - 200 DN8 SF - 200 DN10 SF - 200 DN13

Factor:

Neoperl Bulgaria EOOD & Neoperl Italia Srl

Company Name

Neoperl Bulgaria EOOD & Neoperl Italia Srl

Address

Pop Bogomil Str, N1B, 09301, Dobrich

Country

Bulgaria

View All Listings by this Company

Manufacturer:

Neoperl Bulgaria EOOD & Neoperl Italia Srl

Company Name

Neoperl Bulgaria EOOD & Neoperl Italia Srl

Address

Pop Bogomil Str, N1B, 09301, Dobrich

Country

Bulgaria

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies with captive nut inlet and push fit isolation valve outlet with brass balls. Maximum working pressure and temperature: 16.0 bar for cold water and 10.0 bar at 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1905096

Expiry date:

31/05/2024

Size:

½” BSP captive nut x 15mm push fit (models DG170A & DG170B). ¾” BSP captive nut x 22mm push fit (models DG171A & DG171B).

Marking:

WRAS, Flomasta and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

5052931675548 (F ½" BSP captive nut x 15mm push fit) DG170B (F ½" BSP captive nut x 15mm push fit iso valve)

Factor:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 PaddingtonSquare, London

Postcode

W2 6PX

View All Listings by this Company

EPDM lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204700

Expiry date:

30/04/2027

Size:

See model

Marking:

HRN’, ‘WRAS’ and date of manufacture (YY/MM) on ferrule.

Installation Requirements:

R001

Model:

Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 134-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012106

Expiry date:

31/12/2025

Note:

Open outlet use only.

Marking:

Armera on conical nut

Installation Requirements:

R001

Model:

HO.945.4 Chrome, HO.945.5 Brushed Black, HO.945.6 Brushed Gold & HO.945.7 Brushed Stainless Steel SHOWER HOSES ½” BSP (F) conical or captive nut.

Factor:

ARMERA LIMITED

Company Name

ARMERA LIMITED

Postcode

BA2 4QE

View All Listings by this Company

Range of PVC and PEX lined shower hose with EPDM washers. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2108808

Expiry date:

30/06/2026

Note:

Open outlet use only.

Size:

½” captive nut end connections

Marking:

Bristan on ferrule

Installation Requirements:

R001

Model:

UW-SC2003 shower hoses.

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Stainless steel braided EPDM lined flexible hoses assemblies incorporating various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2112355

Expiry date:

31/12/2026

Size:

See model

Marking:

Flexitub (brand of Eurosanitary), date of manufacture (YYYYMM), WRAS, DN on crimped connector.

Installation Requirements:

R001

Model:

B1/2":15 - F1/2" DN10: 15mm compression x 1/2" captive nut, length 15~200cm B1/2":15(vavle) - F1/2" DN10: 15mm compression and valve x 1/2" captive nut, length 20~200cm B1 1/8”:22- F3/4" DN13: 22mm compression x 3/4" captive nut, length 20~200cm

Manufacturer:

Eurosanitary Ningbo Co Ltd

Company Name

Eurosanitary Ningbo Co Ltd

Address

Zone A China European Industrial Park Cixi City China

View All Listings by this Company

FIT range of stainless-steel braided EPDM lined flexible hoses. Pushfit and Valve Pushfit (Black Plastic End Connectors) models added January 2022 are for use with copper pipe (manufactured to BS EN 1057), PB Pipe (manufactured to BS 7291-2) & PE-X Pipe (manufactured to BS 7291-3). The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves or stainless-steel strainers. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909430

Expiry date:

30/09/2024

Note:

R008 applies to natural models and models added January 2022 only.

Size:

See model

Marking:

Qualflex, QWRAS, date of manufacture (month code and year YY) and operating parameters on ferrule.

Installation Requirements:

R001 R008

Model:

‘FIT" range of hoses FIT5715 15MM PUSHFIT X 1/2 INCH BSP FLEXIBLE HOSE CONNECTOR 150MM LONG FIT6815 15MM PUSHFIT X 1/2 INCH BSP, FIT6815324 15MM PUSH FIT X 3/4 INCH BSP & FIT6822 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE CONNECTOR 300MM LONG FIT8315 15MM PUSHFIT X 1/2 INCH BSP, FIT831534 15MM PUSHFIT X 3/4 INCH BSP & FIT8322 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE CONNECTOR 50MM LONG FIT8015 15MM PUSHFIT X 1/2 INCH BSP, FIT801534 15MM PUSHFIT X 3/4 INCH BSP & FIT8022 22MM PUSHFIT X 3/4 INCH BSP FLEXIB15LE HOSE CONNECTOR 1000MM LONG FIT8415 15MM PUSHFIT X 1/2 INCH BSP & FIT8422 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE TAP CONNECTOR WITH SERVICE VALVE 300MM LONG FIT8715 15MM PUSHFIT X 1/2 INCH BSP & FIT871534 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE TAP CONNECTOR WITH SERVICE VALVE 500MM LONG FIT8815 15MM PUSHFIT X 15MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR WITH SERVICE VALVE 300MM LONG FIT8915 15MM PUSHFIT X 15MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR WITH SERVICE VALVE 500MM LONG FIT8115 15MM X 15MM PUSHFIT & FIT8112 22MM X 22MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR 300MM LONG FIT8215 15MM X 15MM PUSHFIT & FIT8222 22MM X 22MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR 500MM LONG FIT9615 15MM X 1/2 INCH PUSHFIT & FIT9622 22M X 3/4 INCH PUSHFIT COMPRESSION FLEXIBLE HOSE TAP CONNECTOR 300MM LONG FIT9815 15MM X1/2 INCH PUSHFIT & FIT9822 22MM X 3/4 INCH PUSHFIT COMPRESSION FLEXIBLE HOSE TAP CONNECTOR 500MM LONG FIT9715 15MM PUSHFIT X 1/2 INCH COMPRESSION & FIT9722 22MM X 3/4 INCH COMPRESSION FLEXIBLE HOSE TAP CONNECTOR WITH SERIVCE VALVE 300MM LONG FIT7115 15MM PUSHFIT X 1/2 INCH BSP 90 DEGREE ELBOW FLEXIBLE HOSE CONNECTOR FIT7515M10 15MM PUSHFIT X M10 & FIT7515M12 15MM PUSHFIT X M12

Factor:

Polypipe Building Products Ltd.

Company Name

Polypipe Building Products Ltd.

Address

Broomhouse Lane, Edlington, Doncaster

Postcode

DN12 1ES

Country

South Yorkshire

Phone

+44 (0) 1709 770000 Fax: 01709 770001

General Email

marketing@polypipe.com

View All Listings by this Company

Manufacturer:

Hydralectric Ltd.

Company Name

Hydralectric Ltd.

Address

5 High Road Byfleet Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2211700

Expiry date:

30/11/2027

Size:

see model

Marking:

IDC Fluid Control logo (E), WRAS and year of manufacture on crimp connection

Installation Requirements:

R001

Model:

½“ compression x ½" (F) BSP captive nut: SCFA551 - DN10 SCFA553 - DN13 SCFC558 - DN8 SCFC553 - DN13 ¾“ compression x ¾" (F) BSP captive nut: SCFA773 - DN13 SCFC773 - DN13 SCFC779 - DN19

Factor:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100016

Country

China

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1906405

Expiry date:

30/06/2024

Size:

See model

Marking:

Altecnic, WRAS and year of manufacture (YYYY) on crimped connector

Installation Requirements:

R001

Model:

See model. JL – A*B – XX – D – E - XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B (from 01 to 42): Connections 01 and 02 only applicable for DN6 bore hoses only. Connections 03, 19, 26, and 29 applicable for DN6 and DN8 bore hoses only. Connections 05, 06, 20, 21, 22, 23, 30, 35, 36, 39 and 40 applicable for DN6, DN8 and DN10 bore hoses only. Connections 04, 07, 08, 09, 10, 11, 12, 24, 31, 33, 37 and 41 applicable for DN6, DN8, DN10 and DN13 bore hoses only. Connections 13, 14 and 15 applicable for DN8, DN10, DN13 and DN19 bore hoses only. Connections 25 and 27 applicable for DN8, DN10 and DN13 bore hoses only. Connections 16, 17, 18 and 28 applicable for DN10, DN13 and DN19 bore hoses only. Connections 32, 34, 38 and 42 apply to all bore hoses. 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 19 = M8*(12-110), 26 = F15, 29 = 10mm compression, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 20 = M10*(12-110), 21 = M11*(12-110), 22 = M12*(12-110), 23 = M14*(12-110), 30 = 12mm compression fitting, 35 = 10mm pushfit, 36 = 12mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 24 = M15*(12-110), 31 = 15mm compression fitting, 33 = 15mm isolation valve, 37 = 15mm pushfit, 41 = 15mm pushfit isolation valve, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1 28 = 22mm smooth tube, 25 = M16*(12-110), 27 = 15mm smooth tube, 32 = 22mm compression fitting, 34 = 22mm isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve. XX = DN (Dimension from 06 to 19): DN6 = 06, DN8 = 08, DN10 = 10, DN13 = 13, DN19 = 19. D = Outer braided material: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire. E = Inner tube material: 1 = EPDM. XXX = Length (15cm to 200cm): 015 = 15cm … 0200 = 200cm For example: JL-09*20-08-SS-1-045 would be for F1/2 x M10, DN8, stainless steel braided, EPDM inner tube, 45cm long.

Factor:

Altecnic Ltd

Company Name

Altecnic Ltd

Postcode

ST16 1GW

Country

United Kingdom

View All Listings by this Company

Range of stainless steel braided, PEX lined hoses incorporating various brass end connection configuration options. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2005372

Expiry date:

31/05/2025

Note:

Please note that DN6 & DN8 hoses are manufactured at all sites. DN10, DN13 & DN15 hoses are manufactured only by NPI Italia Srl. & Neoperl Nordic A/S.

Size:

Bore diameters DN6 & DN8 may be supplied with the following end connections: Female elbow ⅜, ½, ¾”. Female ⅜, ½, ¾, 7/16, 9/16”. Tube ø8 - ø12. Male M8, M10, M12, M15. Male ⅜, ½, ¾, 7/16, 9/16”. Comp. joint ø8 - ø15. Plugin D7- D13. Bore diameter DN10 may be supplied with the following end connections: Female elbow ½, ¾”. Female ½, ¾, 1”. Tube ø8 - ø15. Male M8, M10, M12, M15. Male ½, ¾, 1”. Bore diameter DN13 may be supplied with the following end connections: Female elbow ¾”. Female ¾, 1”. Male ¾, 1”. Bore diameter DN15 may be supplied with the following end connections: Female 1”. Male 1”. Models added July 2021: Male M11 Bore diameter DN10 supplied with the following end connections: Female elbow 3/8”, Female 3/8”, Male 3/8” DN13 supplied with the following end connections: Female elbow ½ Female ½, Tube ø15, Male ½ DN15 supplied with the following end connections: Female elbow ¾ Female ¾, Tube ø15, Male ½, ¾

Marking:

Neoperl, SPX or (from January 2020) Softpex, 70°C, 10bar, DN, size & date of manufacture (YYMMDD) on end connection.

Installation Requirements:

R001 R008

Model:

UNIFLEX RANGE 93 V XX XX XXXX RANGE OF PEX LINED FLEXIBLE HOSE ASSEMBLIES Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type (supply hose, outlet hose, shower hose etc.). B = Hose (inliner) Material CD.EFG = Manufacturing sequential number. HI = Packaging information.

Factor:

Broen-Lab A/S

Company Name

Broen-Lab A/S

Address

Drejervaengtetr 2 5610 Assens Denmark

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim, D-79379

Country

Germany

Phone

0049 7631 1880

View All Listings by this Company

Range of brass interlocked shower hoses (various finishes - see model) with TPE inner liner and NBR washers. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2210701

Expiry date:

31/10/2027

Size:

See model.

Marking:

Lefroy Brooks (Lion) logo on ferrule (hexagonal nut end).

Installation Requirements:

R001

Model:

XX2101YY: ½” hexagonal BSP nut inlet x outlet, XX2121YY: ½” BSP conical nut x ½" BSP hexagonal nut, XX2103YY: ½” BSP conical nut x ½" BSP hexagonal nut, XX2100YY: ½” hexagonal BSP nut inlet x outlet, XX2116YY: ½” BSP conical nut x ½" BSP hexagonal nut. Where: XX is replaced with letters to denote range: LB - Classic range. YY is replaced with appropriate letters that represent the finish/colour. Examples are (but not limited to): CP - Polished Chrome, NK - Polished Nickel, BC - Brushed Chrome, BN - Brushed Nickel, PB - Polished Brass, BPB - Brushed Brass, AB - Aged Brass, TA - Taunton, AG - Antique Gold, HRG - Hard Rubbed Gold, CM - Champagne Gold, BCM - Brushed Champagne Gold, CO - Copper, MBC - Matt Black Chrome.

Factor:

Lefroy Brooks Diffusion Ltd

Company Name

Lefroy Brooks Diffusion Ltd

Address

Unit 3 Marston Road Wolverhampton WV2 4LX

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110120

Expiry date:

31/10/2026

Size:

See model

Marking:

Valtech, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve

Installation Requirements:

R001

Model:

FH-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. FH-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. FH-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. FH-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. FH-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. FH-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. FH-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). FH-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). FH-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). FH-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). FH-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. FH-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. FH-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. FH-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. FH-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. FH-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). FH-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). FH-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. FH-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. FH-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. FH-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. FH-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. FH-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit FH-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. FH-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. FH-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). FH-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). FH-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Factor:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1906406

Expiry date:

30/06/2024

Size:

See model

Marking:

Jianglin, WRAS and year of manufacture (YYYY) on crimped connector

Installation Requirements:

R001

Model:

HOSE202002 1/2” FBSP x 1/2” FBSP x 430mm FLEXIBLE HOSE HOSE202106A 3/4” MBSP X 3/4” FBSP X 1000mm FLEXIBLE HOSE HOSE202109 3/4” MBSP X 3/4” FBSP X 500mm FLEXIBLE HOSE

Factor:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & parts Inc

Company Name

Yuhuan Jianglin Plumbing Hose & parts Inc

Address

Jinhai Avenue Yuhuan Economic Development Zone

Postcode

China

View All Listings by this Company

Elisa Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012110

Expiry date:

31/12/2025

Note:

Open outlet use only.

Size:

see models

Marking:

ELISA on captive nut.

Installation Requirements:

R001

Model:

706368 1.5m smooth MB Elisa, 706369 1.5m smooth BB Elisa & 706079 1/2" BSP satin chrome Elisa shower hoses. - ½” BSP (F) conical or captive nut.

Factor:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

01959 560 000

General Email

marketing@aqualisa.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103343

Expiry date:

31/03/2026

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)

Installation Requirements:

R001

Model:

JL-F1400120012487 & JL-140038003813

Factor:

Altecnic Ltd

Company Name

Altecnic Ltd

Postcode

ST16 1GW

Country

United Kingdom

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2211707

Expiry date:

30/11/2027

Size:

see model

Marking:

PC, WRAS and year of manufacture on crimp connection Plumb Centre on end

Installation Requirements:

R001

Model:

½“ compression x ½" (F) BSP captive nut: 81891 300mm & 81832 500mm - DN10 81884 300mm & 8188 500mm - DN8 ¾“ compression x ¾" (F) BSP captive nut: 81879 500mm & 81885 300mm - DN13

Factor:

Grafton Merchanting

Company Name

Grafton Merchanting

Address

Ashfield Naas Road Dublin 22 Ireland

View All Listings by this Company

‘TAQ’ range of stainless steel or grey nylon braided (indicated by ACB in model name), EPDM lined flexible hose assemblies, incorporating various end connections. Some of the possible end connections also incorporate EPDM washers, gaskets or ‘O’-rings. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2308800

Expiry date:

31/08/2028

Size:

see models

Marking:

Tucai, TB, WRAS, YY.

Installation Requirements:

R001 R008

Model:

TAQ MINI and TAQ MINI ACB: DN6 hoses, available with M8x1, M10x1, 1/2" Captive Nut, 3/8" Captive Nut, Clip 10, 1/2"BSP (M), 3/8” BSP (M), M15x1 Captive nut and Elbow nut ½”. TAQ and TAQ ACB: DN8 hoses, available with M10x1,1/2" Captive Nut, M12x1, 1/2"BSP (M), Compression fitting 15mm, spigot 10mm, spigot 15mm, M8x1, 3/8" Captive Nut, 3/8” BSP (M), Elbow nut 3/8” Elbow nut ½”, M15x1 Captive nut, ¾” Captive nut, 1/2" valve, Compression fitting 10 mm, 3/4" nut Elbow, Elbow ER, Clip 10. TAQ FORTE and TAQ FORTE ACB: DN10 hoses, available with Compression fitting 15mm, 1/2" Captive Nut, 3/4" Captive Nut, 1/2" BSP (M), spigot 10mm, 3/4" nut Elbow, spigot 15mm, Clip 10, 3/8" Captive Nut, 1/2" valve, Elbow ER, 1/2" nut Elbow, M15x1 Captive nut, M12x1, Elbow nut 3/8”, 3/4" BSP (M), Compression fitting 10mm. TAQ SUPER // TAQ SUPER ACB: DN13 hoses, available with 1/2" nut Elbow, 3/4" nut Elbow, 1/2" BSP (M), 3/4" BSP (M), 1/2" Captive Nut, 3/4" Captive Nut, spigot15mm, Compression fitting 15mm.

Factor:

Tucai S.A.

Company Name

Tucai S.A.

Address

Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)

Country

Spain

Phone

+34 93 718 95 62

General Email

info@tucai.com

View All Listings by this Company

Manufacturer:

Tucai Bulgaria SP Ltd.

Company Name

Tucai Bulgaria SP Ltd.

Address

7538 Aydemir Village 39 Chernozem Street Silistra Region

Country

Bulgaria

General Email

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2301032

Expiry date:

31/01/2028

Size:

See model below.

Marking:

MRG, WRAS, DN & year of production (YYYY).

Installation Requirements:

R001

Model:

X3303IW (DN10 Stainless steel F 1/2” BSP X F 3/4” BSP), X3329IW (DN10 Stainless steel F 1/2” BSP X FC 1/2” BSP), X4300IW (DN13 Stainless steel F 1/2” BSP X F 1/2” BSP), X4328IWG (DN13 Stainless steel M 3/4” BSP X F 3/4” BSP), X4330IWG (DN13 Stainless steel F 3/4” BSP X FC 3/4” BSP). Model added February 2024 X4309IWG (DN13 Stainless steel F 3/4" BSP X F 3/4" BSP)

Manufacturer:

M.R.G. S.r.l.

Company Name

M.R.G. S.r.l.

Address

Via per Baraggia, 1 28024 Gozzano (NO) Italy

Phone

+39 0322 94131

View All Listings by this Company

Range of interlocked shower hoses with EPDM seals and various finishes.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2301068

Expiry date:

31/01/2028

Size:

½” BSP captive nut x ½” BSP captive nut

Marking:

HG and WRAS on ferrule.

Installation Requirements:

R001

Model:

28 132 xxx Hansgrohe Sensoflex Metal Shower hose 125 cm 28 133 002 Hansgrohe Sensoflex Shower hose 1,50m 28 175 002 Hansgrohe Sensoflex Shower hose 1,50m 28 136 xxx Hansgrohe Sensoflex Metal Shower hose 160 cm 28 135 002 Hansgrohe Sensoflex Shower hose 1,75m 28 134 xxx Hansgrohe Sensoflex Metal Shower hose 200 cm 28 134 002 Hansgrohe Sensoflex Shower hose 2,00m 28 177 002 Hansgrohe Sensoflex Shower hose 2,00m available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2301349

Expiry date:

31/01/2028

Size:

DN8 with end connections: M10, M12, F3/8”, F1/2”, 14.7mm & 15mm. DN10 with end connections: M10, M12, F3/8”, F1/2”, F3/4”, 14.7mm, 15mm & 22mm. DN13 with end connections: F1/2”, F3/4”, 14.7mm, 15mm & 22mm.

Marking:

SG, WRAS & year of manufacture YYYY on ferrule

Installation Requirements:

R001

Model:

SG-EPDM-01 series

Manufacturer:

Taizhou SG Hose Co., Ltd.

Company Name

Taizhou SG Hose Co., Ltd.

Address

Shamen Bingang Industrial City, Yuhuan City, Zhejiang Province, China

View All Listings by this Company

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303333

Expiry date:

31/03/2028

Size:

SEE MODEL

Marking:

HL, WRAS and year of manufacture (YYYY) on crimp connection.

Installation Requirements:

R001

Model:

HL16W-EPDM-01 series: Bore diameter DN8 available with end connections: M8x1, M8x1.25, M10x1, M12x1, M14x1, M15x1, 3/8”, ½”, ¾” & 15mm. Bore diameter DN10 available with end connections: M10x1, M12x1, 3/8”, ½”, ¾”, 15mm & 22mm. Bore diameter DN13 available with end connections: ½”, ¾”, 15mm & 22mm.

Manufacturer:

Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Company Name

Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Address

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of brass end connections (see models). “DN 9.5 ½” compression with ISO valve” model also incorporates a screwdriver operated isolation valve. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303014

Expiry date:

31/03/2028

Size:

DN9: ½” BSP (F) Captive nut, M10x1, ½” Compression, ½” BSP (M) or M12x1. DN9.5: ½” BSP (F) Captive nut, ½” BSP (F) Captive Nut with ISO valve M10x1, ½” Compression with ISO valve, ½” BSP (M) or M12x1. DN12.5: ½” BSP (F) Captive nut, 3/4” BSP (F) Captive nut, ½” Compression, ¾” Compression, ½” BSP (M) or ¾” BSP (M).

Marking:

Ivanci logo (trademark of Zhejiang Fansheng Fluid Control Co., LTD), WRAS & date of manufacture (MMYY) on ferrule.

Installation Requirements:

R001

Model:

RCC.L

Factor:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Country

China

View All Listings by this Company

Range of stainless steel interlocked shower hoses with an EPDM inner liner and EPDM washers.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303311

Expiry date:

31/03/2028

Note:

Open outlet use only.

Size:

½” BSP nut (various types, see model).

Marking:

Binyang on ferrule.

Installation Requirements:

R001

Model:

SS112-A-A-**-**-** Where: A = end connection (type and fitting): 1. Conic nut smooth, 2. Conic nut smooth, 3. Conic nut with ‘O’-ring, 4. Conic nut with ‘O’-ring, 5. Ball nut, 6. Hex nut, 7. Knurl nut. The first suffix “**” represents the material of inner tube: EPDM. The second suffix “**” represents the length: 50cm-200cm. The third suffix “***” represents surface finish: CP: Chrome plated, BN: Brushed Nickel, MB: Matte Black, ORB: Oil Rubber Bronze, EP: Polish, G: Gold. Example code: SS112-1-3-EPDM-200-CP = Conic nut smooth at one end, Conic nut with ‘O’-ring at the other, EPDM inner hose, 200cm long and chrome plated.

Manufacturer:

Xiamen Binyang Sanitary Ware Co., Ltd.

Company Name

Xiamen Binyang Sanitary Ware Co., Ltd.

Address

4/F, No. 588 Tongming Road, Industrial Concentration Zone, Tong’an District, Xiamen.

Country

China

Phone

+86-0592-7258165

View All Listings by this Company

Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2109068

Expiry date:

30/09/2026

Size:

See model

Marking:

GOLOY, WRAS and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

WM-BB02, WM-BB02-CH, WM-BB02-BN, WM-BB02-BL, WM-BB02-BZ & WM-BB02-BB M15 (M) inlet-1/2" BSP conical nut models: Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment 1/2" BSP captive nut inlet x 1/2" BSP conical nut outlet models: PVC hose: HC11 50~250cm Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment Stainless Steel Double lock hose HXXXXX 50~250cm 1st X stands for materials of inner tube: A=PVC B=EPDM P=PEX 2nd X stands for inner diameter: 7=DN7 10=DN10 3rd X stands for materials of outer tube: 1=SUS201 2=SUS202 3=SUS304 4th X and 5th X stands for colour of surface treatment: 01=electrolysis 02=chrome plated 03=matt black 04=ORB 05=green bronze 06=antique brass 07=golden 08=karat gold 09=rose gold 10=red bronze 11=drawing nickel

Factor:

Harrison Bathrooms

Company Name

Harrison Bathrooms

Address

Gelderd Cross 94 Gelderd Road

Postcode

LS12 6HJ

View All Listings by this Company

Manufacturer:

Xiamen Oshince Technology Co., Ltd

Company Name

Xiamen Oshince Technology Co., Ltd

Address

No.177, South Second Ring Road, Tong An Industrial district, Xiamen City

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies with various brass end connections. The hoses are supplied with EPDM O-rings or washers. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2305002

Expiry date:

31/05/2028

Size:

See Models.

Marking:

Jetom, WRAS, Year of Manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

H5MAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5MAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1, 30~200cm H5MAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1, 30~200cm H5MAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1,30~200cm H5MAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5MAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5MAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5MAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1, 30~200cm H5MAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm H5MAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm H5MAU-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm H5NAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5NAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1, 30~200cm H5NAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1,30~200cm H5NAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1, 30~200cm H5NAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5NAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5NAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5NAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1,30~200cm H5NAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm H5NAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm H5NAU-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm H5PAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5PAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1,30~200cm H5PAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1, 30~200cm H5PAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1, 30~200cm H5PAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5PAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5PAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5PAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1, 30~200cm. H5PAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm. H5PAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm. H5PAU-XXX101C-1Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm. XXX denotes the length of the hose (30cm to 200cm). For examples: 50cm = 050 100cm = 100 150cm = 150

Manufacturer:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

7th of No. 1, High-tech Park South Road, Luncang Town, Nan'an City, Quanzhou City, Fujian Province, P.R. China

Country

China

Phone

+86 595 68979514

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2306017

Expiry date:

30/06/2028

Size:

Please refer to model.

Marking:

Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.

Installation Requirements:

R001

Model:

UKWR denotes the customer code and is replaced with XX. L denotes the length of the hose (between 50mm & 4,000mm) and is replaced with L50 to L4000. DG10E-UKWR-001-L (15mm compression x M10) - Bore size DN8. DG10E-UKWR-002-L (15mm compression x M12) - Bore size DN8. DG10E-UKWR-003-L (10mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-004-L (15mm compression x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-005-L (F ½" BSP X F ½" BSP) - Bore size DN10. DG10E-UKWR-006-L (15mm compression iso valve x F ½"BSP) - Bore size DN10. DG10E-UKWR-007-L (15mm push fit iso valve x 15mm push fit) - Bore size DN10. DG10E-UKWR-008-L (22mm compression iso valve x F ¾" BSP) - Bore size DN13. DG10E-UKWR-009-L (22mm x F ¾" BSP) - Bore size DN13. DG10E-UKWR-011-L (15mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-012-L (15mm compression x F ½" BSP) - Bore size DN10. DG10E-UKWR-013-L (15mm compression x 10mm compression) - Bore size DN10. DG10E-UKWR-015-L (15mm compression x 15mm compression) - Bore size DN10. DG10E-UKWR-014-L (15mm compression x F ¾" BSP) - Bore size DN10. DG10E-UKWR-016-L (15mm compression x 22mm compression) - Bore size DN10. DG10E-UKWR-017-L (F ½” BSP x 22mm compression) - Bore size DN10. DG10E-UKWR-018-L (15mm compression iso valve x F ¾" BSP) - Bore size DN10. DG10E-UKWR-019-L (15mm push fit x M10) - Bore size DN10. DG10E-UKWR-020-L (15mm push-fit x M12) - Bore size DN10. DG10E-UKWR-021-L (15mm push-fit x F ¾" BSP) - Bore size DN10. DG10E-UKWR-022-L (15mm push fit x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-023-L (15mm push-fit x 15mm compression) - Bore size DN10. DG10E-UKWR-024-L (15mm push-fit x 15mm push fit) - Bore size DN10. DG10E-UKWR-025-L (F ¾" BSP x F ¾" BSP) - Bore size DN13. DG10E-UKWR-026-L (22mm compression x 22mm compression) - Bore size DN13. DG10E-UKWR-029-L (F ½” x M10) - Bore size DN8. DG10E-UKWR-030-L (F ⅜” x M10) - Bore size DN8. DG10E-UKWR-031-L (15mm compression iso valve x 15mm compression) - Bore size DN10. DG10E-WRAS-034-L (F3/4” x F3/4” elbow) - Bore size DN10. DG10E-QY-007-L (F ⅜” x F⅜”) - Bore size DN8. DG10E-QY-008-L (F⅜” x F⅜” elbow) - Bore size DN8. DG10E-834-001-L (F⅜" X F¼") - Bore size DN8. DG10E-UKWR-032-L (F½" x M½") - Bore size DN13, DG10E-UKWR-033-L (15mm x M½") - Bore size DN13, DG10E-UKWR-035-L (F¾" x M¾") - Bore size DN13 & DG10E-UKWR-036-L (F½" x F½" Elbow) - Bore size DN10. DG10E-WRAS-038-L (F½" x M½") - Bore size DN8 DG10E-XC-002-L (F½" BSP X F½" BSP) - Bore size DN8 DG10E-A007010-028-L(F1/2”X15mm compression iso valve)-Bore size DN13 DG10E-EWT-003-L(F1/2”XF1/2”)-Bore size DN13 DG10E-A007010-027-L(F1/2”X15mm)-Bore size DN13 DG10E-A007119-019-L(22mm X 22mm with iso valve)-Bore size DN13 DG10E-A007010-037-L(15mm X 15mm)-Bore size DN13 DG10E-A007010-013-L(15mm X M12x1 Short)-Bore size DN10 DG10E-SCS-001-L(F1/2”X14.7mm with iso valve) - Bore size DN10 DG10E-SCS-002-L(F3/4”X21mm with iso valve)-Bore size DN13 DG10E-A007010-014-L(15mm X M12x1 Long)-Bore size DN10 DG10E-TECH-001-L (F1/2"XM12)-Bore size DN8.

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103345

Expiry date:

31/03/2026

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

MSL, WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

BFFTCW-1510 BFFTCW-1510500 BFFTCW-1512 BFFTCW-1512500 BFFTCW-10D500 BFFTCW-10D900 BFFTCW-12D500 BFFTCW-12D900 BFFTCW-DD500 BFFTCW-DD900 BFFTCWIV-10D300 BFFTCWIV-12D300 BFFTCW-1515300 BFFTCW-1515500 BFFTCW-1515900 BFFTCW-15D300 BFFTCW-15D500 BFFTCW-15D900 BFFTCW-15E300 BFFTCW-15E500 BFFTCW-15E900 BFFTCW-2222300 BFFTCW-2222500 BFFTCW-22E300 BFFTCW-22E500 BFFTCW-22E900 BFFTCWIV-15D150 BFFTCWIV-15D300 BFFTCWIV-15D500 BFFTCWIV-15E300 BFFTCWIV-15E500 BFFTCWIV-22E30

Factor:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

View All Listings by this Company

Multi-layer shower hose with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012115

Expiry date:

31/12/2025

Note:

Open outlet use only.

Size:

See model

Marking:

Intatec Logo, WRAS and date of manufacture (MM/YY) on captive nut.

Installation Requirements:

R001

Model:

800030CP - ½” BSP (F) conical or captive nut.

Factor:

Intatec Ltd

Company Name

Intatec Ltd

Address

Airfield Industrial Estate, Hixon, Staffs.

Postcode

ST18 0PF

Country

United Kingdom

Phone

+44 1889 272 199

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2306071

Expiry date:

30/06/2028

Size:

Please refer to model.

Marking:

Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.

Installation Requirements:

R001

Model:

C54400 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ½" BSP C54401 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ¾" BSP C54402 *CB WRAS 30CM FLEX TAP CONNS 22mm X F ¾" BSP C54403 *CB WRAS 50CM FLEX TAP CONNS 15mm X F ½" BSP C54404 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ½"BSP C54405 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ¾" BSP C54406 *CB WRAS ISO FLEX TAP CONS 22mm iso valve x F ¾" BSP C54412 *CB WRAS M10 MONO FLEX TAP CONNS 15mm x M10 C54413 *CB WRAS M12 MONO FLEX TAP CONNS 15mm x M12 C54414 *CB WRAS 30CM FLEX TAP CONNS 15mm x 15mm

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2306072

Expiry date:

30/06/2028

Size:

Please refer to model.

Marking:

FLOMASTA (Brand of Kingfisher), WRAS and date of manufacture (YYYY) on crimped sleeve. Models added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on crimped sleeve.

Installation Requirements:

R001

Model:

05272204 (15mm compression x M10) - Bore size DN8. 05272198 (15mm compression x M12) - Bore size DN8. 05272310 (F ½" BSP X F ½" BSP) - Bore size DN10. 05272174(15mm compression iso valve x F ½"BSP) - Bore size DN10. 5052931708345 (22mm compression iso valve x F ¾" BSP) - Bore size DN13. 05272150, 05272167 (22mm x F ¾" BSP) - Bore size DN13. 05272181 (15mm compression x F ⅜" BSP) - Bore size DN10. 05272228 (15mm compression x F ½" BSP) - Bore size DN10. 05272402 (15mm compression x 10mm compression) - Bore size DN10. 05272242 (15mm compression x 15mm compression) - Bore size DN10. 05272327 (15mm compression x F ¾" BSP) - Bore size DN10. 05272280 (15mm compression x 22mm compression) - Bore size DN10. 5052931708352 (15mm compression iso valve x F ¾" BSP) - Bore size DN10. Models Added December 2023: 05272334, 05272372, 05272396 (22mmxF3/4" BSP)-Bore size DN13. 5052931675531,, 05272303, 05272358, 05272389, 5052931675548 (15mm compression xF½"BSP)- Bore size DN10. 05272365 (15mm compressionxF"BSP) Bore size DN10. 5052931462629, 05272273, 05272341(15mm compressionx15mm compression)- Bore size DN10. 05280469 (F ½"BSPXF½"BSP)-Bore size DN10. 05272266 (15mm compression iso valve xF½"BSP)- Bore size DN10.

Factor:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 PaddingtonSquare, London

Postcode

W2 6PX

View All Listings by this Company

Stainless steel braided hose having an EPDM liner and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003405

Expiry date:

31/03/2025

Size:

½” BSP (F) captive nut x 10mm

Marking:

AETVITA, WRAS & year of production (YYYY) on nut.

Installation Requirements:

R001

Model:

B404 - A - AETVITA

Factor:

AETVITA INC

Company Name

AETVITA INC

Address

228 PARK AVE S #79525 NEW YORK,NEW YORK 10003,USA

Country

United States

View All Listings by this Company

Range of shower hoses with TPE linings and EPDM ‘O’-rings. Maximum operating temperature 60°C. Open outlet use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303074

Expiry date:

31/03/2028

Marking:

Hansgrohe on conical nut.

Installation Requirements:

R001

Model:

30 334 118 Hansgrohe Metaflex'C 800mm chrome, 28 152 xxx Hansgrohe Mariflex showerhose 1250mm, 28 262 xxx Hansgrohe Metaflex C showerhose 1250mm chrome, 28 644 xxx Hansgrohe Metaflex Shower hose 1250mm, 30 475 518 Hansgrohe Metaflex C showerhose 1250mm, 28 153 xxx Hansgrohe Mariflex showerhose 1500mm, 28 263 xxx Hansgrohe Metaflex C showerhose 1500mm, 28 645 xxx Hansgrohe Metaflex Shower hose 1500mm, 28 266 xxx Hansgrohe Metaflex C showerhose 1600mm chrome, 30 475 618 Hansgrohe Meta showerhose 1600mm, 31 475 618 Hansgrohe Metaflex C 1600mm, 28 155 xxx Hansgrohe Mariflex showerhose 1750mm, 28 265 xxx Hansgrohe Metaflex C showerhose 1750mm, 28 646 xxx Hansgrohe Metaflex Shower hose 1750mm, 30 511 718 Hansgrohe Metaflex showerhose 1750mm, 28 154 xxx Hansgrohe Mariflex showerhose 2000mm, 28 264 xxx Hansgrohe Metaflex C showerhose 2000mm chrome, 28 647 xxx Hansgrohe Metaflex Shower hose 2000mm.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2003406

Expiry date:

31/03/2025

Note:

Open outlet use only.

Size:

½” BSP Captive nut.

Marking:

Aqualisa on ferrule.

Installation Requirements:

R001

Model:

707019 (DN10),

Factor:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

01959 560 000

General Email

marketing@aqualisa.com

View All Listings by this Company

Range of shower hoses. Model ML-PVC-DCHS01-XX is a PVC hose incorporating EPDM, NBR or Silicone seals. Model ML-SS-SKHS01-XX is a PVC or EPDM lined shower hose incorporating EPDM, NBR or silicone seals with a stainless-steel interlocked outer with (various finishes).

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2309035

Expiry date:

30/09/2028

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Milan logo, WRAS and date of manufacture on ferrule (YYYY/MM/DD)

Installation Requirements:

R001

Model:

ML-PVC-DCHS01-XX ML-SS-SKHS01-XX ML-SS-SKHS01-XX XX denotes 01-Golden 02-black 03-Cr-Plated 04-Natural Surface colour and its connectors as below: G1/2, M15X1 ML-PVCDCHS01-XX XX denotes 01-Brushed Gold 02-Silver 03-Black and with connector G1/2”.

Factor:

Ningbo Milan Sanitary Ware Technology Co., Ltd.

Company Name

Ningbo Milan Sanitary Ware Technology Co., Ltd.

Address

West of No. 18, West Industrial Zone 1st Road, Lubu Town, Yuyao City Ningbo,Zhejiang,China

View All Listings by this Company

Range of Stainless steel braided EPDM lined flexible hose assemblies with a variety of brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature: 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2309310

Expiry date:

30/09/2028

Size:

see model

Marking:

Leading, WRAS, Year of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Model:

LEADING-EPDM-DN8 Available with connections: G3/8(F), G1/2(F), M8x1, M10x1, M12x1, G1/2(M), 15mm LEADING-EPDM-DN10 Available with connections: G3/8(F), G1/2(F), G3/4(F), M10x1, G1/2(M), 15mm LEADING-EPDM-DN13 Available with connections: G1/2(F), G3/4(F), G3/4(M)

Manufacturer:

Zhejiang Leading Plumbing Co., Ltd

Company Name

Zhejiang Leading Plumbing Co., Ltd

Address

No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company

Qualflex classic range of stainless steel braided EPDM lined flexible hoses incorporating EPDM O-rings. Maximum working pressure at 20°C ,10.0bar and maximum working pressure at 65°C , 6.0bar. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2309025

Expiry date:

30/09/2028

Size:

See models

Marking:

Qualflex, QWRAS, Pressure, temp and date of manufacture (YYM YY = year code and M = month code, A-Jan, B-Feb etc) on ferrule.

Installation Requirements:

R001

Model:

FH10 – 15mm pushfit x ½” BSP captive nut FH12 – 15mm pushfit x ¾” BSP captive nut FH20 – 22mm pushfit x ¾” BSP captive nut FH15 – 15mm pushfit x 15mm pushfit FH22 – 22mm pushfit x 22mm pushfit FV15 – 15mm pushfit x 15mm pushfit

Manufacturer:

Hydralectric Ltd.

Company Name

Hydralectric Ltd.

Address

5 High Road Byfleet Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hoses. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

1909435

Expiry date:

30/09/2024

Note:

Size:

See model

Marking:

Qualflex, QWRAS, date of manufacture (month code and year YY) and operating parameters on ferrule. Models added January 2022: Qualflex, QWRAS and year of manufacture (YY) on ferrule.

Installation Requirements:

R001 R008

Model:

HOSE900001: DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight. HOSE202105: DN10 x Brass 3/4BPP Female Straight x Brass 3/4BSP Male HOSE900004: DN10 x Brass 3/8BSP Female Elbow x Brass 1/2BSP Female straight HOSE202107: DN10 x Brass 3/4BSP Female Elbow x Brass 3/4BSP Female straight. HOSE300001 : DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight.

Factor:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Manufacturer:

Hydralectric Ltd.

Company Name

Hydralectric Ltd.

Address

5 High Road Byfleet Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

View All Listings by this Company

‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2310102

Expiry date:

31/10/2028

Size:

½” BSP captive nut.

Marking:

Hansgrohe on nut.

Installation Requirements:

R001

Model:

28 167 002, 28 167 xx0, 28 168 xx0, 28 169 002, 28 169 xx0, 28 162 002, 28 160 002. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110140

Expiry date:

31/10/2026

Size:

See model

Marking:

Tenby, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.

Installation Requirements:

R001

Model:

AX-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. AX-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. AX-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. AX-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. AX-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. AX-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. AX-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). AX-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). AX-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). AX-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). AX-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. AX-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. AX-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. AX-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. AX-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. AX-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). AX-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). AX-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. AX-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. AX-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. AX-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. AX-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. AX-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit AX-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. AX-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. AX-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). AX-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). AX-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Factor:

Tenby Imports & Exports Ltd.

Company Name

Tenby Imports & Exports Ltd.

Address

Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire

Postcode

WD25 8HL

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103347

Expiry date:

31/03/2026

Size:

CMFTCW-1510300 - 15mm compression x M10 CMFTCW-1512300 - 15mm compression x M12 CMFTCW-1515300 - 15mm compression x 15mm compression CMFTCW-15D300 - F1/2 x 15mm compression CMFTCW-15D500 - F1/2 x 15mm compression CMFTCW-15E300 - F3/4 x 15mm compression CMFTCW-22E300 - F3/4 x 22mm compression CMFTCWIV-15D300 - F1/2 x 15mm isolation valve CMFTCWIV-15E300 - F3/4 x 15mm isolation valve CMFTCWIV-22E300 - F3/4 x 22mm isolation valve CMFTCWP-15E300 - F3/4 x 15mm pushfit (used with copper tube manufactured to BS2871)

Marking:

MB (Brand of Navigator) WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

CMFTCW-1510300, CMFTCW-1512300, CMFTCW-1515300, CMFTCW-15D300, CMFTCW-15D500, CMFTCW-15E300, CMFTCW-22E300, CMFTCWIV-15D300, CMFTCWIV-15E300, CMFTCWIV-22E300 & CMFTCWP-15E300

Factor:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

View All Listings by this Company

Stainless steel braided, PEX lined flexible hose assemblies with EPDM washers and O ring incorporating an isolation valve (brass body and ball), tee piece (brass) and incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2310014

Expiry date:

31/10/2028

Size:

Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8" BSP split nut x 3/8" spigot end connection.

Marking:

IDC (E) logo, size, temperature and pressure on hose sleeve.

Installation Requirements:

R001 R008

Model:

322-1175.

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103346

Expiry date:

31/03/2026

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

MB (Brand of Navigator used under license by Wolseley), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

236550, 236548, 236543, 236547, 236551, 236545, 236549, 236542, 236541, 236544 & 236546

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections (see models). Some models incorporate a screwdriver operated isolation valve. All compression and push-fit connections are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312018

Expiry date:

31/12/2028

Size:

See Model list. Note, for the connection sizes listed in the models below, use the following key: XXMM = XXmm compression, MXXx1 = MXXx1 (M) FXX” = XX” BSP (F) XXmm Pushfit = XXmm Pushfit

Marking:

Dingbo logo, WRAS and Date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Model:

Model Code/Number (Connection Size) DB8MM-15MM×M10L (15MM × M10x1) DB8MM-15MM×M10S (15MM × M10×1) DB8MM-1/2×M10L (F1/2" × M10×1) DB8MM-1/2×M10S (F1/2" × M10×1) DB9MM-1/2×1/2 (F1/2" × F1/2") DB9MM-1/2×M12L (F1/2" × M12×1) DB9MM-1/2×M12S (F1/2" × M12×1) DB9MM-15MM×M12L (15MM × M12×1) DB9MM-15MM×M12S (15MM × M12×1) DB9MM-1/2×15MM (F1/2" × 15MM) DB9MM-15MM×15MM (15MM × 15MM) DB9MM-3/4×15MM (F3/4" × 15MM) DB9MM-1/2×15MMV (F1/2" × 15MM with VALVE) DB9MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-1/2×1/2 (F1/2" × F1/2") DB12MM-1/2×15MM (F1/2" × 15MM) DB12MM-15MM×15MM (15MM × 15MM) DB12MM-3/4×15MM (F3/4" × 15MM) DB12MM-3/4×22MM (F3/4" × 22MM) DB12MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-3/4×22MMV (F3/4" × 22MM with VALVE) DB19MM-3/4×22MM (F3/4" × 22MM) DB19MM-3/4C×22MM (F3/4" × 22MM) DB12MM-1/2 x 15mm Push- fit (F1/2" × 15mm Pushfit) DB12MM-3/4 x 15mm Push- fit (F3/4" × 15mm Pushfit) DB12MM-1/2 x 15mm Push- fit VALVE (F1/2" × 15mm Pushfit with VALVE) DB12MM-3/4 x 15mm Push- fit VALVE (F3/4" × 15mm Pushfit with VALVE) DB12MM-1/2 x 22mm Push- fit (F1/2" × 22mm Pushfit) DB12MM-3/4 x 22mm Push- fit (F3/4" × 22mm Pushfit) DB12MM-1/2 x 22mm Push- fit VALVE (F1/2" × 22mm Pushfit with VALVE) DB12MM-3/4 x 22mm Push- fit VALVE (F3/4" × 22mm Pushfit with VALVE) DB12MM-15mm Push-fit x 15mm Push-fit (15mm Pushfit × 15mm Pushfit) DB12MM-22mm Push-fit x 22mm Push-fit (22mm Pushfit × 22mm Pushfit) Note, any models with either ‘VALVE’ or ‘V’ on the end of the model name incorporate a screwdriver operated isolation valve.

Manufacturer:

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Address

No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company

Hydravend range of PVC coated (grey or white in colour), hytrel lined, flexible thermoplastic hoses, incorporating a white quadruple layered hose with a black TPE inner lining. The hoses are supplied with plastic or brass end connectors and with or without servicing valves. Maximum working pressure and temperature: 12.0 bar Cold water use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312069

Expiry date:

31/12/2028

Size:

DN06, DN08, DN10, DN12

Marking:

Qualiflex logo, QWRAS, Temperature, Pressure and date of manufacture (YY) on Ferrule

Installation Requirements:

R001 R008

Model:

06HV 08HV 10HV 12HV Hose assembly part number follows the below format: (The example given is for a Ø6mm internal diameter, Hydravend Range, 900mm overall length, female to male fittings) DDHHLLLFNN Where DD = diameter HH = Hose type LLL = Length FF where each F = Fitting code covering type, size and material. (M = Male, F = Female, D = Compression, S = Standpipe, E = Elbow, J = JG Fitting & P = Qualflex pushfit) NN = Number

Manufacturer:

Hydralectric Ltd.

Company Name

Hydralectric Ltd.

Address

5 High Road Byfleet Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

View All Listings by this Company

Range of shower hoses with a rubber outer layer (various finishes, see models) and either PVC or PEX inner liner (see models), EPDM or NBR O-rings (see models) and either brass or stainless-steel connectors (see models). Open Outlet use only. Maximum operating temperature 85.0°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312077

Expiry date:

31/12/2028

Size:

See model

Marking:

HRN (trademark), WRAS and manufacturing date (MM/YY) on the ferrule.

Installation Requirements:

R001

Model:

Model Code: 17X-XXX-X-X-X-X The ‘X’s denote multiple parts of the assembly, and are explained below: 1st ‘X’ denotes the DN and can be replaced with: 0 = DN8, 1 = DN10 2nd, 3rd & 4th ‘X’s denotes the length and can be replaced with, as examples: 30 = 30cm Length (Shortest Hose) 300 = 300cm Length (Longest Hose) 5th ‘X’ denotes the colour and can be replaced with: 1 = Black, 2 = White, 3 = Silver, 4 = Rose, 5 = Golden, 6 = Gray. 6th ‘X’ denotes the inlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 7th ‘X’ denotes the outlet size and can be replaced with: 1 = ½” BSP (F) Conical Nut, 2 = M20 (F) Conical Nut, 3 = M19 (F) Conical Nut, 4 = M18 (F) Conical Nut. 8th ‘X’ denotes the inner tube material and can be replaced with: 1 = PVC, 2 = PEX.

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202006

Expiry date:

28/02/2029

Size:

See Models

Marking:

IDC Logo, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

GMF series DN6 GMF0613S - M10 short male x 3/8"F captive nut GMF0613L - M10 Long male x 3/8"F captive nut GMF0615S - M10 short male x 1/2"F captive nut GMF0615L - M10 Long male x 1/2"F captive nut GMF0603S - M8 short Male x 3/8"F captive nut GMF0603L - M8 long Male x 3/8"F captive nut DN8 GMF0813S - M10 short male x 3/8"F captive nut GMF0813L - M10 Long male x 3/8"F captive nut GMF0815S - M10 short male x 1/2"F captive nut GMF0815L - M10 Long male x 1/2"F captive nut GMF0803S - M8 short male x 3/8"F captive nut GMF0823S - M12 short male x 3/8"F captive nut GMF0823L - M12 Long male x 3/8"F captive nut GMF0825S - M12 short male x 1/2"F captive nut GMF0825L - M12 Long male x 1/2"F captive nut DN10 GMF1013S - M10 short male x 3/8"F captive nut GMF1013L - M10 Long male x 3/8"F captive nut GMF1015S - M10 short male x 1/2"F captive nut GMF1015L - M10 Long male x 1/2"F captive nut GMF1023S - M12 short male x 3/8"F captive nut GMF1023L - M12 Long male x 3/8"F captive nut GMF1025S - M12 short male x 1/2"F captive nut GMF1025L - M12 Long male x 1/2"F captive nut DN13 GMF1313S - M10 short male x 3/8"F captive nut GMF1313L - M10 Long male x 3/8"F captive nut GMF1315S - M10 short male x 1/2"F captive nut GMF1315L - M10 Long male x 1/2"F captive nut GMF1323S - M12 short male x 3/8"F captive nut GMF1323L - M12 Long male x 3/8"F captive nut GMF1325S - M12 short male x 1/2"F captive nut GMF1325L - M12 Long male x 1/2"F captive nut GAN series DN8 GAN0833 - 3/8"F x 3/8"F captive nut GAN0835 - 3/8"F x 1/2"F captive nut GAN0855 - 1/2"F x 1/2"F captive nut GAN0877 - 3/4"F x 3/4"F captive nut GAN0857 - 1/2"F x 3/4"F captive nut DN10 GAN1033 - 3/8"F x 3/8"F captive nut GAN1055 - 1/2"F x 1/2"F captive nut GAN1077 - 3/4"F x 3/4"F captive nut DN13 GAN1333 - 3/8"F x 3/8"F captive nut GAN1355 - 1/2"F x 1/2"F captive nut GAN1377 - 3/4"F x 3/4"F captive nut GAM series DN8 GAM0833 - 3/8"M x 3/8"F captive nut GAM0835 - 3/8"M x 1/2"F captive nut GAM0853 - 1/2"M x 3/8"F captive nut GAM0855 - 1/2"M x 1/2"F captive nut GAM0877 - 3/4"M x 3/4"F captive nut DN10 GAM1033 - 3/8"M x 3/8"F captive nut GAM1035 - 3/8"M x 1/2"F captive nut GAM1053 - 1/2"M x 3/8"F captive nut GAM1055 - 1/2"M x 1/2"F captive nut GAM1077 - 3/4"M x 3/4"F captive nut DN13 GAM1333 - 3/8"M x 3/8"F captive nut GAM1335 - 3/8"M x 1/2"F captive nut GAM1353 - 1/2"M x 3/8"F captive nut GAM1355 - 1/2"M x 1/2"F captive nut GAM1377 - 3/4"M x 3/4"F captive nut GMM series DN8 GMM0833 - 3/8"M x 3/8"M GMM0855 - 1/2"M x 1/2"M DN10 GMM1033 - 3/8"M x 3/8"M GMM1055 - 1/2"M x 1/2"M GMM1055 - 1/2"M x 1/2"M DN13 GMM1355 - 1/2"M x 1/2"M GMM1377 - 3/4"M x 3/4"M GEF series DN8 GEF0833 - 3/8"Elbow F x 3/8"F GEF0835 - 3/8"Elbow F x 1/2"F GEF0853 - 1/2"Elbow F x 3/8"F GEF0855 - 1/2"Elbow F x 1/2"F DN10 GEF1055 - 1/2"Elbow F x 1/2"F GEF1057 - 1/2"Elbow F x 3/4"F GEF1077 - 3/4"Elbow F x 3/4"F DN13 GEF1355 - 1/2"Elbow F x 1/2"F GEF1357 - 1/2"Elbow F x 3/4"F GEF1377 - 3/4"Elbow F x 3/4"F GEM series DN8 GEM0833 - 3/8"Elbow F x 3/8"M GEM0835 - 3/8"Elbow F x 1/2"M GEM0853 - 1/2"Elbow F x 3/8"M GEM0855 - 1/2"Elbow F x 1/2"M DN10 GEM1055 - 1/2"Elbow F x 1/2"M GEM1057 - 1/2"Elbow F x 3/4"M GEM1077 - 3/4"Elbow F x 3/4"M DN13 GEM1355 - 1/2"Elbow F x 1/2"M GEM1357 - 1/2"Elbow F x 3/4"M GEM1377 - 3/4"Elbow F x 3/4"M GMC series DN8 GMC0815S - M10 short male x 15mm compression GMC0815L - M10 Long male x 15mm compression GMC0825S - M12 short male x 15mm compression GMC0825L - M12 Long male x 15mm compression DN10 GMC1015S - M10 short male x 15mm compression GMC1015L - M10 Long male x 15mm compression GMC1025S - M12 short male x 15mm compression GMC1025L - M12 Long male x 15mm compression DN13 GMC1315S - M10 short male x 15mm compression GMC1315L - M10 Long male x 15mm compression GMC1325S - M12 short male x 15mm compression GMC1325L - M12 Long male x 15mm compression GAC series DN8 GAC0855 - 15mm compression x 1/2"F captive nut GAC0857 - 15mm compression x 3/4"F captive nut GAC0877 - 22mm compression x 3/4"F captive nut DN10 GAC1053 - 15mm compression x 3/8"F captive nut GAC1055 - 15mm compression x 1/2"F captive nut GAC1057 - 15mm compression x 3/4"F captive nut GAC1077 - 22mm compression x 3/4"F captive nut DN13 GAC1355 - 15mm compression x 1/2"F captive nut GAC1357 - 15mm compression x 3/4"F captive nut GAC1377 - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut GVF series DN8 GVF0855 - 15mm isolating valve x 1/2"F captive nut GVF0877 - 22mm isolating valve x 3/4"F captive nut DN10 GVF1055 - 15mm isolating valve x 1/2"F captive nut GVF1057 - 15mm isolating valve x 3/4"F captive nut GVF1077 - 22mm isolating valve x 3/4"F captive nut DN13 GVF1355 - 15mm isolating valve x 1/2"F captive nut GVF1377 - 22mm isolating valve x 3/4"F captive nut GVF1977 - DN19 22mm isolating valve x 3/4"F captive nut GDC series DN8 GDC0855 - 15mm compression x 15mm compression GDC0877 - 22mm compression x 22mm compression DN GDC1055 - 15mm compression x 15mm compression GDC1077 - 22mm compression x 22mm compression DN13 GDC1355 - 15mm compression x 15mm compression GDC1377 - 22mm compression x 22mm compression DN19 GDC1977 - 22mm compression x 22mm compression GDEF series DN13 GDEF1355 - 1/2"Elbow F x 1/2"Elbow F

Factor:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100016

Country

China

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies. Models are available with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202045

Expiry date:

28/02/2029

Size:

DN8 - DN19

Marking:

FF logo, Year of manufacture (YY) and WRAS on ferrule

Installation Requirements:

R001

Model:

DN8: H334 - 15mm compression end -M12x1 male short H335 - 15mm compression end - M10 x1 male long H336 - 15mm compression end - M10 x1 male short H337 - 1/2" BSP (F) - M10 x1 male short H225 - 1/2" BSP (F) - M10 x1 male long H225 - 3/8" BSP (F) - M10 x1 male short H233 - 3/8" BSP (F) - M10 x1 male long H233 - 3/8" BSP (F) - M10 x1 male long H392 - 3/8" BSP (F) 90° - 3/8" BSP (F) H420 - 3/8" BSP (F) - 3/8" BSP (F) conical seat H600 - 3/8" BSP (F) 90°- 3/8" BSP (F) 90° conical seat DN10: A113 - 1/2" BSP (F) - 15 mm compression end B114 - 3/4" BSP (F) - 15 mm compression end B114 - 3/4"F - 15 mm compression end A327 - 15mm compression end - 15mm compression end A1111 - 1/2" BSP (F) Filling loop - 1/2" BSP (F) Filling loop E203 - 3/8" BSP (F) - 3/8” BSP (F) 90° E204 - 1/2" BSP (F) - 1/2” BSP (F) 90° E206 - 3/4" BSP (F) - 3/4" BSP (F) 90° E290 - 1/2" BSP (F) - 3/4" BSP (F) 90° E893 - 3/4" BSP (F) 90° - 3/4" BSP (F) 90° E520 - 1/2" BSP (M) - 1/2” BSP (F) 90° E201 - 1/2" BSP (F) - 1/2" BSP (F) E198 - 1/2" BSP (M) – 1/2" BSP (F) E487 - 3/4" BSP (F) - 3/4" BSP (F) E200 - 3/8" BSP (F) - 3/8” BSP (F) E573 - 1/2" BSP (F) 90° - ½” BSP (F) 90° E752 - 3/8" BSP (F) 90° - 3/8” BSP (F) 90° E693 - 1/2" BSP (F) 90° - ¾” BSP (F) 90° DN13: B11S - 3/4" BSP (F) - 22mm compression end A343 - 1/2" BSP (F) - 15mm compression end C338 - 3/4" BSP (F) - 15mm compression end B395 - 22mm compression end - 22 mm compression end F478 - 1/2" BSP (F) - 15mm straight tube A327 - 15mm compression end - 15mm compression end F342 - 15mm straight tube - 15mm straight tube F764 - 1/2" BSP (F) Filling loop - 15mm compression end F800 - 1/2" BSP (F) 90° Filling loop - 15mm compression end F213 - 1/2" BSP (F) - ½” BSP (F) 90° F214 - 1/2" BSP (M) - ½” BSP (F) 90° F215 - 3/4" BSP (F) - 3/4" BSP (F) 90° F217 - 3/4" BSP (M) - 3/4" BSP (F) 90° F493 - 1/2" BSP (F) - 3/4" BSP (F) 90° F350 - 3/4" BSP (F) 90°- 3/4" BSP (F) 90° F207 - 1/2" BSP (M) – 1/2" BSP (F) F210 - 1/2" BSP (F) - 1/2" BSP (F) F211 - 3/4" BSP (F) - 3/4" BSP (F) F209 - 3/4" BSP (M) - 3/4" BSP (F) F373 - 3/4" BSP (F) - 1/2" BSP (F) F888 - 1/2" BSP (F) 90° - ½” BSP (F) 90° DN16: N525 - 3/4" BSP (F) - 3/4" BSP (F) 90° N539 - 3/4" BSP (F) - 3/4" BSP (F) N637 - 3/4" BSP (M) - 3/4" BSP (F) N526 - 3/4" BSP (F) 90° - 3/4" BSP (F) 90° DN19: C753 - 3/4" BSP (F) - 22mm straight tube C754 - 3/4" BSP (F) - 22mm compression end C597 - 22mm straight tube - 22mm straight tube C431 - 3/4" BSP (F) - 3/4" BSP (F) C755 - 22mm compression end - 22mm compression end

Manufacturer:

Flexinox Srl.

Company Name

Flexinox Srl.

Address

Via F. Comelli, 40-33034 Fagana, Udine

Country

Italy

View All Listings by this Company

Range of nylon braided (DG50E model series) or stainless steel braided (DG10E model series), EPDM lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240402030

Expiry date:

30/04/2029

Size:

See models below. Note: Comp = compression, PF = push-fit

Marking:

Fanski, WRAS and year of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Model:

DG50E-WRAS-100-L - 15mm comp x M10 short, DN8 DG10E-WRAS-300-L - 15mm comp x M10 short, DN8 DG50E-WRAS-101-L - 15mm comp x M12 short, DN8 DG10E-WRAS-301-L - 15mm comp x M12 short, DN8 DG50E-WRAS-102-L - ⅜” BSP (F) x 10mm comp, DN10 DG10E-WRAS-302-L - ⅜” BSP (F) x 10mm comp, DN10 DG50E-WRAS-103-L - ½” BSP (F) elbow x 15mm comp, DN10 DG10E-WRAS-303-L - ½” BSP (F) elbow x 15mm comp, DN10 DG50E-WRAS-104-L - ½” BSP (F) x ½” BSP (F), DN10 DG10E-WRAS-304-L - ½” BSP (F) x ½” BSP (F), DN10 DG50E-WRAS-105-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG10E-WRAS-305-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG50E-WRAS-106-L - 15mm PF x 15mm PF iso valve, DN10 DG10E-WRAS-306-L - 15mm PF x 15mm PF iso valve, DN10 DG50E-WRAS-107-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG10E-WRAS-307-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG50E-WRAS-108-L - ¾” BSP (F) x 22mm comp, DN13 DG10E-WRAS-308-L - ¾” BSP (F) x 22mm comp, DN13 DG50E-WRAS-109-L - 22mm PF x 22mm PF iso valve, DN13 DG10E-WRAS-309-L - 22mm PF x 22mm PF iso valve, DN13 DG50E-WRAS-110-L - ⅜” BSP (F) x 15mm comp, DN10 DG10E-WRAS-310-L - ⅜” BSP (F) x 15mm comp, DN10 DG50E-WRAS-111-L - ½” BSP (F) x 15mm comp, DN10 DG10E-WRAS-311-L - ½” BSP (F) x 15mm comp, DN10 DG50E-WRAS-112-L - 10mm comp x 15mm comp, DN10 DG10E-WRAS-312-L - 10mm comp x 15mm comp, DN10 DG50E-WRAS-113-L - 15mm comp x 15mm comp, DN10 DG10E-WRAS-313-L - 15mm comp x 15mm comp, DN10 DG50E-WRAS-114-L - ¾” BSP (F) x 15mm comp, DN10 DG10E-WRAS-314-L - ¾” BSP (F) x 15mm comp, DN10 DG50E-WRAS-115-L - 15mm comp x 22mm comp, DN10 DG10E-WRAS-315-L - 15mm comp x 22mm comp, DN10 DG50E-WRAS-116-L - ½” BSP (F) x 22mm comp, DN10 DG10E-WRAS-316-L - ½” BSP (F) x 22mm comp, DN10 DG50E-WRAS-117-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG10E-WRAS-317-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG50E-WRAS-118-L - 15mm PF x M10x1 short, DN10 DG10E-WRAS-318-L - 15mm PF x M10x1 short, DN10 DG50E-WRAS-119-L - 15mm PF x M12x1 short, DN10 DG10E-WRAS-319-L - 15mm PF x M12x1 short, DN10 DG50E-WRAS-120-L - ¾” BSP (F) x 15mm PF, DN10 DG10E-WRAS-320-L - ¾” BSP (F) x 15mm PF, DN10 DG50E-WRAS-121-L - 15mm PF x ½” BSP (F) elbow, DN10 DG10E-WRAS-321-L - 15mm PF x ½” BSP (F) elbow, DN10 DG50E-WRAS-122-L - 15mm comp x 15mm PF, DN10 DG10E-WRAS-322-L - 15mm comp x 15mm PF, DN10 DG50E-WRAS-123-L - 15mm PF x 15mm PF, DN10 DG10E-WRAS-323-L - 15mm PF x 15mm PF, DN10 DG50E-WRAS-124-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG10E-WRAS-324-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG50E-WRAS-125-L - 22mm comp x 22mm comp, DN13 DG10E-WRAS-325-L - 22mm comp x 22mm comp, DN13 DG50E-WRAS-126-L - 22mm PF x 22mm comp, DN13 DG10E-WRAS-326-L - 22mm PF x 22mm comp, DN13 DG50E-WRAS-127-L - 22mm PF x 22mm PF, DN13 DG10E-WRAS-327-L - 22mm PF x 22mm PF, DN13 DG50E-WRAS-128-L - ½” BSP (F) x M10 short, DN8 DG10E-WRAS-328-L - ½” BSP (F) x M10 short, DN8 DG50E-WRAS-129-L - ⅜” BSP (F) x M10 short, DN8 DG10E-WRAS-329-L - ⅜” BSP (F) x M10 short, DN8 DG50E-WRAS-130-L - 15mm comp x 15mm comp iso valve, DN10 DG10E-WRAS-330-L - 15mm comp x 15mm comp iso valve, DN10 DG50E-WRAS-131-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG10E-WRAS-331-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG50E-WRAS-132-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG10E-WRAS-332-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG50E-WRAS-133-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG10E-WRAS-333-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG50E-WRAS-134-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG10E-WRAS-334-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG50E-WRAS-135-L - ½” BSP (F) x ½" BSP (M), DN13 DG10E-WRAS-335-L - ½” BSP (F) x ½" BSP (M), DN13 DG50E-WRAS-136-L - 15mm comp x ½” BSP (M), DN13 DG10E-WRAS-336-L - 15mm comp x ½” BSP (M), DN13 DG50E-WRAS-137-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG10E-WRAS-337-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG50E-WRAS-138-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG10E-WRAS-338-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG50E-WRAS-139-L - ½” BSP (F) x ½” BSP (M), DN8 DG10E-WRAS-339-L - ½” BSP (F) x ½” BSP (M), DN8 DG50E-WRAS-140-L - ½” BSP (F) x ½” BSP (F), DN8 DG10E-WRAS-340-L - ½” BSP (F) x ½” BSP (F), DN8 DG50E-WRAS-141-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG10E-WRAS-341-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG50E-WRAS-142-L - ½” BSP (F) x ½” BSP (F), DN13 DG10E-WRAS-342-L - ½” BSP (F) x ½” BSP (F), DN13 DG50E-WRAS-143-L - ½” BSP (F) x 15mm comp, DN13 DG10E-WRAS-343-L - ½” BSP (F) x 15mm comp, DN13 DG50E-WRAS-144-L - 22mm comp x 22mm comp iso valve, DN13 DG10E-WRAS-344-L - 22mm comp x 22mm comp iso valve, DN13 DG50E-WRAS-145-L - 15mm comp x 15mm comp, DN13 DG10E-WRAS-345-L - 15mm comp x 15mm comp, DN13 DG50E-WRAS-146-L - 15mm comp x M12x1 short, DN10 DG10E-WRAS-346-L - 15mm comp x M12x1 short, DN10 DG50E-WRAS-147-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG10E-WRAS-347-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG50E-WRAS-148-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG10E-WRAS-348-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG50E-WRAS-149-L - 15mm comp x M12x1 long, DN10 DG10E-WRAS-349-L - 15mm comp x M12x1 long, DN10 DG50E-WRAS-150-L - ½” BSP (F) x M12x1 short, DN8 DG10E-WRAS-350-L - ½” BSP (F) x M12x1 short, DN8 DG50E-WRAS-151-L - ½” BSP (F) x 15mm PF, DN10 DG10E-WRAS-351-L - ½” BSP (F) x 15mm PF, DN10 DG50E-WRAS-152-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG10E-WRAS-352-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG50E-WRAS-153-L - ¾” BSP (F) x 22mm PF, DN13 DG10E-WRAS-353-L - ¾” BSP (F) x 22mm PF, DN13 DG50E-WRAS-154-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG10E-WRAS-354-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG50E-WRAS-155-L - ½” BSP (F) x 15mm PF, DN13 DG10E-WRAS-355-L - ½” BSP (F) x 15mm PF, DN13 DG50E-WRAS-156-L - ¾” BSP (F) x 15mm PF, DN13 DG10E-WRAS-356-L - ¾” BSP (F) x 15mm PF, DN13 DG50E-WRAS-157-L - ⅜” BSP (F) x M10x1 short, DN6 DG10E-WRAS-357-L - ⅜” BSP (F) x M10x1 short, DN6 DG50E-WRAS-158-L - ½” BSP (F) x M10x1 short, DN6 DG10E-WRAS-358-L - ½” BSP (F) x M10x1 short, DN6 DG50E-WRAS-159-L - ⅜” BSP (F) x M8x1 short, DN6 DG10E-WRAS-359-L - ⅜” BSP (F) x M8x1 short, DN6 DG50E-WRAS-160-L - ½” BSP (F) x M10x1 short, DN6 DG10E-WRAS-360-L - ½” BSP (F) x M10x1 short, DN6 DG50E-WRAS-161-L - ⅜” BSP (F) x M8x1 short, DN6 DG10E-WRAS-361-L - ⅜” BSP (F) x M8x1 short, DN6 DG50E-WRAS-162-L - ½” BSP (F) x 15mm PF, DN13 DG10E-WRAS-362-L - ½” BSP (F) x 15mm PF, DN13 DG50E-WRAS-163-L - ¾” BSP (F) x 15mm PF, DN13 DG10E-WRAS-363-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-164-L - M12x1 short x M8x1 short DG10X-WRAS-364-L - M12x1 short x M8x1 short DG50X-WRAS-165-L - M12x1 short x M8x1 short DG50X-WRAS-365-L - M12x1 short x M8x1 short DG50X-WRAS-166-L - F ½” BSP x 15mm push-fit iso valve DG50X-WRAS-366-L - F ½” BSP x 15mm push-fit iso valve

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals. Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202083

Expiry date:

28/02/2029

Size:

See Models

Marking:

Aquazone, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Model:

AQF-T01-F1/2x F1/2 Note last number in code is length e.g. AQF-T01-F1/2F1/2-20 20cm length hose AQF-T01-F1/2F1/2-30 30 cm length hose

Factor:

AQUAZONE/BAGNODESIGN (SANIPEXGROUP)

Company Name

AQUAZONE/BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall

Postcode

WF17 9LU

Country

United Kingdom

View All Listings by this Company