Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections (see models). Some models incorporate a screwdriver operated isolation valve. All compression and push-fit connections are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312018

Expiry date:

31/12/2028

Size:

See Model list. Note, for the connection sizes listed in the models below, use the following key: XXMM = XXmm compression, MXXx1 = MXXx1 (M) FXX” = XX” BSP (F) XXmm Pushfit = XXmm Pushfit

Marking:

Dingbo logo, WRAS and Date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Model:

Model Code/Number (Connection Size) DB8MM-15MM×M10L (15MM × M10x1) DB8MM-15MM×M10S (15MM × M10×1) DB8MM-1/2×M10L (F1/2" × M10×1) DB8MM-1/2×M10S (F1/2" × M10×1) DB9MM-1/2×1/2 (F1/2" × F1/2") DB9MM-1/2×M12L (F1/2" × M12×1) DB9MM-1/2×M12S (F1/2" × M12×1) DB9MM-15MM×M12L (15MM × M12×1) DB9MM-15MM×M12S (15MM × M12×1) DB9MM-1/2×15MM (F1/2" × 15MM) DB9MM-15MM×15MM (15MM × 15MM) DB9MM-3/4×15MM (F3/4" × 15MM) DB9MM-1/2×15MMV (F1/2" × 15MM with VALVE) DB9MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-1/2×1/2 (F1/2" × F1/2") DB12MM-1/2×15MM (F1/2" × 15MM) DB12MM-15MM×15MM (15MM × 15MM) DB12MM-3/4×15MM (F3/4" × 15MM) DB12MM-3/4×22MM (F3/4" × 22MM) DB12MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-3/4×22MMV (F3/4" × 22MM with VALVE) DB19MM-3/4×22MM (F3/4" × 22MM) DB19MM-3/4C×22MM (F3/4" × 22MM) DB12MM-1/2 x 15mm Push- fit (F1/2" × 15mm Pushfit) DB12MM-3/4 x 15mm Push- fit (F3/4" × 15mm Pushfit) DB12MM-1/2 x 15mm Push- fit VALVE (F1/2" × 15mm Pushfit with VALVE) DB12MM-3/4 x 15mm Push- fit VALVE (F3/4" × 15mm Pushfit with VALVE) DB12MM-1/2 x 22mm Push- fit (F1/2" × 22mm Pushfit) DB12MM-3/4 x 22mm Push- fit (F3/4" × 22mm Pushfit) DB12MM-1/2 x 22mm Push- fit VALVE (F1/2" × 22mm Pushfit with VALVE) DB12MM-3/4 x 22mm Push- fit VALVE (F3/4" × 22mm Pushfit with VALVE) DB12MM-15mm Push-fit x 15mm Push-fit (15mm Pushfit × 15mm Pushfit) DB12MM-22mm Push-fit x 22mm Push-fit (22mm Pushfit × 22mm Pushfit) Note, any models with either ‘VALVE’ or ‘V’ on the end of the model name incorporate a screwdriver operated isolation valve.

Manufacturer:

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Address

No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company