Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The tap body incorporates plastic flow regulator and the product is also supplied with a click type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2012009

Expiry date:

31/12/2025

Note:

No testing has been performed on the pop-up waste.

Size:

Stainless steel braided flexible hose assemblies with EPDM lined hose assemblies with ½” captive nut end connections.

Marking:

Francis Pegler on the base of body (model 922026). Comap on the base of body (model 922027).

Installation Requirements:

R001 R006 R010 R160

Model:

922026 Cascada Mini Mono Basin Mixer 922027 Cascada Mono Basin Mixer

Factor:

StH Westco Ltd

Company Name

StH Westco Ltd

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

View All Listings by this Company

Manufacturer:

STH Jiangmen

Company Name

STH Jiangmen

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks, single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011317

Expiry date:

30/11/2025

Note:

No testing has been performed on the pop-up waste.

Size:

Polyamide (PA) braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

Grohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

Grohe “Euroeco” 32.765, 32.766, 32.762 & 32.763

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlets incorporate a plastic aerator and some models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011319

Expiry date:

30/11/2025

Note:

No testing has been performed on the pop-up waste.

Size:

Polyamide (PA) braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

Grohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

Grohe basin mixer, Eurosmart 2015: 23.456.002 32.467.002 33.188.002 32.154.002 23.372.002 32.467.20L 33.265.20L Grohe basin mixer ½’’, Eurosmart 2015 with a pop-up waste: 33.265.002 32.926.002

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet of models SAV2113/SHD113/SEV113 incorporates plastic aerators. SPA2113 and SPA2313 incorporate a stainless steel mesh at the spout. SAVV2113, SHD113, SEV113, SPA2113, SWO2113 are supplied with a pop-up waste. Maximum working Pressure 10.0 bar. Maximum operating temperature 65ºC.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010075

Expiry date:

31/10/2025

Note:

R160 applies to the waterfall outlets only.

Size:

Stainless Steel braided, PEX lined hose assembly incorporating ½” BSP captive nut end compression end connections.

Marking:

DEVA on operating member. DTC53 (brand of Methven) on rear of body.

Installation Requirements:

R001 R006 R010 R160

Model:

SAVV2113. SHD113. SEV113. SPA2113. SPA2313. SWO2113. SWO2113/EX. SWO2313. Model added May 2023: T-SAVV2313 Model added September 2023: MCA113 Model added October 2023: MCA313

Manufacturer:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

View All Listings by this Company

Range of single hole, single outlet, (fixed) combination tap assemblies with brass bodies (chromium plated), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator and is also supplied with an optional flow straightener. Some products are supplied with a lever type pop-up waste (see models). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2012067

Expiry date:

31/12/2025

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 15mm compression end connections.

Marking:

Sottini on operating member (models B1048AA & B1049AA). Ideal Standard on operating member (models B0763AA & B0764AA).

Installation Requirements:

R001 R006 R009 R010

Model:

B1048AA Tesino SL Basin Mixer (with pop-up waste) B1049AA Tesino SL Basin Mixer B0763AA Tempo Single Lever Basin Mixer (with pop-up waste) B0764AA Tempo Single Lever Basin Mixer

Manufacturer:

Ideal Standard Ltd

Company Name

Ideal Standard Ltd

Address

53 Marin Str. Sevlievo, Bulgaria

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chrome plated brass), incorporating non-rising spindle headworks. The spout outlet incorporates a plastic flow straightener. Supplied with a pop-up waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2012914

Expiry date:

31/12/2025

Note:

No testing performed on pop-up waste

Size:

15mm copper tube

Marking:

Alterna on body

Installation Requirements:

R001 R006 R010

Model:

ALT10017

Factor:

Saint-Gobain Building Distribution Ltd

Company Name

Saint-Gobain Building Distribution Ltd

Address

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chrome plated brass), incorporating non-rising spindle headworks with cross type operating members. The spout outlet incorporates a plastic flow straightener. Supplied with a pop-up waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2012916

Expiry date:

31/12/2025

Note:

No testing performed on pop-up waste

Size:

15mm copper tube

Marking:

Bristan Regency on indice.

Installation Requirements:

R001 R006 R010

Model:

R BAS C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101302

Expiry date:

31/01/2026

Size:

Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

Vitra on operating member. Date of manufacture (WW/YY) on rear of body.

Installation Requirements:

R001 R006 R009 R010

Model:

A42513VUK

Manufacturer:

Eczacibasi Building Materials Vitra Faucet Division

Company Name

Eczacibasi Building Materials Vitra Faucet Division

Address

4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik

Country

Turkey

Phone

+90 228 314 07 90

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101307

Expiry date:

31/01/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Vitra and date of manufacture (WW/YY) on body.

Installation Requirements:

R001 R006 R009 R010

Model:

A42467VUK

Manufacturer:

Eczacibasi Building Materials Vitra Faucet Division

Company Name

Eczacibasi Building Materials Vitra Faucet Division

Address

4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik

Country

Turkey

Phone

+90 228 314 07 90

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models 23472W-4-CP and 23475W-4-CP are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101308

Expiry date:

31/01/2026

Note:

No testing performed on pop-up waste.

Size:

Grey polymeric (PET) braided PE-X lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Kohler on body.

Installation Requirements:

R001 R006 R009 R010

Model:

23472W-4-CP 23472W-4ND-CP 23475W-4-CP 23475W-4ND-CP

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road, Cheltenham, Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

+44 (0) 844 571 5000

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (chrome plated) and ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Models 74013W-4AB-CP and 74026W-4AB-CP are supplied with a pop up waste . Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101329

Expiry date:

31/01/2026

Note:

No testing has been performed on the pop-up waste.

Size:

ACB braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Kohler on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

74013W-4BND-CP. 74013W-4AB-CP. 74026W-4-AB-CP.

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road, Cheltenham, Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

+44 (0) 844 571 5000

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating. The spout outlet incorporates a plastic aerator or flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2012911

Expiry date:

31/12/2025

Size:

Stainless steel braided EPDM lined flexible hose assemblies with 22mm compression end connections.

Marking:

Bristan on tap body

Installation Requirements:

R001 R006 R010

Model:

ALP 1HBF C

Factor:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon

Postcode

B78 1SG

Country

Tamworth

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Models 10 102 xxx & 10 103 xxx are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101002

Expiry date:

31/01/2026

Size:

Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP captive nut.

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Model:

AXOR Starck Single range: 10 001 xxx 10 003 xxx 10 007 xxx 10 102 xxx 10 103 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headworks with a single lever operating member. The inlets incorporate plastic strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets of ‘2820’ incorporate a spherical valve. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2104703

Expiry date:

30/04/2026

Note:

No testing preformed on the pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies (with or without a spherical valve) incorporating a 3/8” BSP captive nut.

Marking:

Delabie on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

Securitherm 2720LEP, 2820LEP, 2720TEP & 2820TEP

Factor:

Delabie Ltd.

Company Name

Delabie Ltd.

Address

1-3 Henderson House Hithercroft Road Wallingford Oxfordshire

Postcode

OX10 9DG

Country

United Kingdom

Phone

+44 1491 824 449

View All Listings by this Company

Manufacturer:

Delabie SAS

Company Name

Delabie SAS

Address

18 Rue Du Marechal Foch 80130 Friville Escarbotin

Country

France

View All Listings by this Company

Range of single-hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and some models are supplied with pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101057

Expiry date:

31/01/2026

Note:

No testing performed on the pop-up wastes.

Size:

Stainless steel braided PEX lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

Vernis Blend with pop-up waste: 71550XXX 71551XXX 71557XXX 71559XXX 71584XXX 71585XXX 71593XXX 71594XXX 71566XXX 71568XXX 71560XXX 71561XXX Vernis Blend without pop-up waste: 71558XXX 71569XXX 71567XXX 71580XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of wall mounted single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a touchless operation method which operates a solenoid valve which controls the flow and is connected via a hose to the spout outlet. The spout outlets incorporate a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011312

Expiry date:

30/11/2025

Size:

½” BSP (M)

Marking:

Kohler on spout

Installation Requirements:

R001 R009 R040

Model:

123C36-SANA-** (AC powered) 124C36-SANA-** (DC powered) Where ** denotes finish and can be replaced with: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, 2BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass, BLR - Black and Red.

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road, Cheltenham, Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

+44 (0) 844 571 5000

View All Listings by this Company

Single-hole, single outlet, (fixed) combination tap assembly with brass bodies (chrome plated), incorporating non-rising spindle headworks with cross top operating members. The spout incorporates a plastic flow straighter this product is also supplied with an additional aerator. Model CL4 is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2012031

Expiry date:

31/12/2025

Note:

No testing performed on the pop-up waste

Size:

Stainless steel braided EPDM lined flexible hose assembles with 1/2" BSP captive nut end connections.

Marking:

Burlington London on indices.

Installation Requirements:

r001 r006 R010

Model:

CL4 Models added March 2021: T12

Factor:

Bathroom Brands Group Limited.

Company Name

Bathroom Brands Group Limited.

Postcode

DA1 5FU

Country

United Kingdom

Phone

07775 491 559

View All Listings by this Company

Range of wall mounted, electronically operated combination tap assemblies (various finishes, see model ) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlets incorporate a aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2009320

Expiry date:

30/09/2025

Size:

½” BSP (M)

Marking:

Dolphin Solutions logo (D with a dolphin) on body

Installation Requirements:

R001 R040

Model:

DSaaa.bbb.c.dd Where ‘aaa’ denotes the style type, the following options are available: DS111 - 90° bent spout, DS112 - 90° bent spout with wall plate fixing kit, DS113 - 55° bent spout or DS114 - 55° bent spout with wall plate fixing kit. Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 100mm - 275mm in 25mm increments. Where ‘c’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette

Manufacturer:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headworks, and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2101305

Expiry date:

31/01/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nut end connection with ½” BSP (F) adaptors.

Marking:

Gessi on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

60071

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

View All Listings by this Company

Range of wall mounted, single hole, single outlet (fixed) combination tap assemblies with chromium plated, DZR brass bodies. The products incorporate a single sequential headwork with a single lever operating member or a push button. The spout outlets incorporate a plastic flow straightener. The inlets incorporate an approved check valve cartridge however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with metal back nuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011047

Expiry date:

30/11/2025

Size:

10mm copper tails

Marking:

DVS on indice.

Installation Requirements:

R001 R010 R040

Model:

MT04-001 & AT04-002

Manufacturer:

Dart Valley Systems Ltd.

Company Name

Dart Valley Systems Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies incorporating chromium plated or stainless steel plated brass bodies, ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Some models are supplied with a click type waste (fully tested). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011022

Expiry date:

30/11/2025

Size:

Stainless steel braided EPDM or PEX lined flexible hose with 3/8” (F) captive nut end connections

Marking:

Fima Carlo Franttini or Fima on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

Spillo Up collection comprising of models: F3031XS.2 F3031XS F3031XS.1 F3031/HXS.1 F3031/HXS F3031/HXSG F3031/HXSG.1 F3031/HXSV F3031/HXSV.1 F3031/HXSX. F3031/HXSX F3031XSG F3031XSG.1 F3031XSG.2 F3031XSV F3031XSV.1 F3031XSV.2 F3031XSX F3031XSX.1 F3031XSX.2 F3071/HINOX F3071/HINOX.1 F3071INOX F3071INOX.1 Mast collection comprising of models: F3131 F3131.1 F3131.2 F3131/H F3131/H.1

Manufacturer:

Fima Carlo Frattini SPA

Company Name

Fima Carlo Frattini SPA

Country

Italy

Phone

0039 0322 9549

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2104020

Expiry date:

30/04/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

PPI on rear of body.

Installation Requirements:

R001 R006 R010

Model:

204628. 204728. 204738.

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2104022

Expiry date:

30/04/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½ captive nut end connections.

Marking:

Dien on Body.

Installation Requirements:

R001 R006 R010

Model:

34811. 70311. 70311-3. 70321. 70411. 70421. 71011. 71011-2. 71011-3. 71021. 71211-2. 71221. 71311-2. 71321.

Manufacturer:

Kaiping Dien Sanitary Ware Industry Co., Ltd.

Company Name

Kaiping Dien Sanitary Ware Industry Co., Ltd.

Address

No. A12-3, 2nd Industrial Park, Shuikou Town, Kaiping City, Guangdong Province

Country

China

Phone

+86-750-2715638

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies incorporating chromium plated or stainless steel plated brass bodies, ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Some models are supplied with a click type waste (fully tested). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011105

Expiry date:

30/11/2025

Size:

Stainless steel braided EPDM or PEX lined flexible hose with 3/8” (F) captive nut end connections

Marking:

C.P.Hart on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

CPHSP3031XS CPHSP3031XS1 CPHSP3031XSG CPHSP3031XSG1 CPHSP3031XSV CPHSP3031XSV1 CPHSP3031XSX CPHSP3031XSX1 CPHSP3031HXS CPHSP3031HXS1 CPHSP3031HXSG CPHSP3031HXSG1 CPHSP3031HXSV CPHSP3031HXSV1 CPHSP3031HXSX CPHSP3031HXSX1 CPHSP30711SS CPHSP3071HSS CPHSP3071H1SSH CPHMA31311 CPHMA3131 CPHMA3131H CPHMA3131H1 ZCPHSP3031XS ZCPHSP3031XS1 ZCPHSP3031XSG ZCPHSP3031XSG1 ZCPHSP3031XSV ZCPHSP3031XSV1 ZCPHSP3031XSX ZCPHSP3031XSX1 ZCPHSP3031HXS ZCPHSP3031HXS1 ZCPHSP3031HXSG ZCPHSP3031HXSG1 ZCPHSP3031HXSV ZCPHSP3031HXSV1 ZCPHSP3031HXSX ZCPHSP3031HXSX1 ZCPHSP30711SS ZCPHSP3071HSS ZCPHSP3071H1SS ZCPHSP3071SS ZCPHMA31311 ZCPHMA3131 ZCPHMA3131H ZCPHMA3131H1

Factor:

CP Hart

Company Name

CP Hart

Address

Unit 40 Charles Park, Crossways Business Park, Dartford

Postcode

DA2 6QA

Country

Kent

View All Listings by this Company

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a stainless-steel aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 85°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1911929

Expiry date:

30/11/2024

Size:

Stainless steel braided EPDM lined hose assemblies incorporating a ½” captive nut end connections

Marking:

Bristan on BODY

Installation Requirements:

R001 R006 R010

Model:

BQINV BAS C COMBINATION TAP ASSEMBLIES

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2003911

Expiry date:

31/03/2025

Size:

Stainless steel braided EPDM lined hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Bristan on body

Installation Requirements:

R001 R006 R010

Model:

BQVEC BAS C SINGLE HOLE TAP

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating a thermostatic sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2105907

Expiry date:

31/05/2026

Size:

15mm Copper Tube

Marking:

Bristan on operating member.

Installation Requirements:

R001 R006 R010

Model:

SOLO2-T3LL & SOLO2-T3SL

Factor:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon

Postcode

B78 1SG

Country

Tamworth

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907934

Expiry date:

31/07/2024

Size:

Stainless steel braided EPDM lined flexible hose assembly with 15mm compression end connections

Marking:

INFINITA on operating member

Installation Requirements:

R001 R006 R010

Model:

INF-CRL-001

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001930

Expiry date:

31/01/2025

Size:

Stainless steel braided PEX lined hose assemblies, incorporating a ½” captive nut end connection.

Marking:

INFINITA on the operating member

Installation Requirements:

R001 R006 R010

Model:

INF-LGS-001 & INF-GRD-001

Factor:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010412

Expiry date:

31/10/2025

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating either ½” or 3/8” captive nut end connections (see model).

Marking:

Kingfisher Goodhome Logo on body

Installation Requirements:

R001 R006 R010

Model:

3663602300823, with ½” flexible hose, Brushed Inox 3663602299707, with 3/8” flexible hose, Brushed Inox 3663602300106, with ½” flexible hose, Brushed Brass 3663602300809, with 3/8” flexible hose, Brushed Brass 3663602299745, with ½” flexible hose, Brushed Copper 3663602301288, with 3/8” flexible hose, Brushed Copper 3663602300922, with ½” flexible hose, Matt White 3663602299929, with 3/8” flexible hose, Matt White 3663602300625, with ½” flexible hose, Matt Black 3663602299905, with 3/8” flexible hose, Matt Black

Factor:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

View All Listings by this Company

Single hole, single outlet, fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004071

Expiry date:

30/04/2025

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

IFLO on tap body.

Installation Requirements:

R001 R006 R010

Model:

484028 IFLO TALL BASIN MIXER COMBINATION TAP ASSEMBLIES

Factor:

CITY PLUMBING SUPPLIES HOLDINGS

Company Name

CITY PLUMBING SUPPLIES HOLDINGS

Postcode

NN6 7SL

View All Listings by this Company