Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107302

Expiry date:

31/07/2026

Size:

Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections fitted with a 3/8” to ½” adaptor.

Marking:

Gessi Emporio on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

38602

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating ceramic a cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107026

Expiry date:

31/07/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Lota on body.

Installation Requirements:

R001 R006 R009 R010

Model:

Basin mixer: 63399-5201 (Chrome), 63399-526801 (Matt black), 63399-524408 (Brushed brass). Tall basin mixer: 63400-5201 (Chrome), 63400-526801 (Matt black), 63400-524408 (Brushed brass).

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No.61 Xingnan Road, Jimei District, Xiamen, 361022

Country

China

Phone

86-592-6665866

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly with a brushed stainless-steel body, incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107030

Expiry date:

31/07/2026

Size:

Stainless steel braided silicone lined flexible hose assemblies incorporating ⅜" captive nut end connections.

Marking:

Treemme on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

5MM (IT2811IS5MZZ).

Manufacturer:

Rubinetterie 3M S.r.l.

Company Name

Rubinetterie 3M S.r.l.

Address

Via Enrico Mattei 30 53041 Asciano (SI)

Country

Italy

View All Listings by this Company

Range of single-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with click type or pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107044

Expiry date:

31/07/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

HG LogisSingle: 71 070 xxx, 71 071 xxx, 71 072 xxx, 71 073 xxx, 71 077 xxx, 71 090 xxx, 71 091 xxx, 71 100 xxx, 71 101 xxx, 71 102 xxx, 71 103 xxx, 71 107 xxx, 71 170 xxx & 71 171 xxx. HG CostCo Logis: 71 152 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe Sanitary Ware Products (Shanghai)

Company Name

Hansgrohe Sanitary Ware Products (Shanghai)

Address

Auestrasse 5-9 D77761 Schiltach Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 110 000 model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107046

Expiry date:

31/07/2026

Note:

No testing performed on pop-up waste

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections

Marking:

AXOR on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

36 110 xxx AXOR Citterio E, 36 111 xxx AXOR Citterio E, 36 112 xxx AXOR Citterio E, 36 113 xxx AXOR Citterio E. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107051

Expiry date:

31/07/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 10mm spigot end connections.

Marking:

Dornbracht on pop-up waste operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

22500360 Single-hole basin mixer

Manufacturer:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 D-58640 Iserlohn Germany

Phone

+49 2371 433 0

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The products are supplied with a brass ⅜” BSP (M) x 15mm compression adapter. The spout outlets incorporate a plastic aerator. The A6259AA model is supplied with pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107062

Expiry date:

31/07/2026

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Sottini on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

A6491AA - Paglia SL Small Basin Mixer with PUW, A6492AA - Paglia SL Small Basin Mixer with no PUW.

Factor:

Sottini

Company Name

Sottini

Address

THE BATHROOM WORKS NATIONAL AVENUE HULL

Postcode

HU5 4HS

General Email

ukcustcare@idealstandard.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass). Incorporating a ceramic cartridge headwork and single lever operating members however model 922034 is fitted with a non rising spindle headwork and dome type operating members. The spout outlet incorporates a plastic flow straightener on models: 922064, 922034, 922302, 922303, 922304 or flow straightener and aerator kit on models: 922311, 922312, 922313, and some models are supplied with a click waste. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107310

Expiry date:

31/07/2026

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections

Marking:

Francis Pegler on body.

Installation Requirements:

R001 R006 R010

Model:

922302 Araya Lujo Slim Mono Basin 922303 Araya Lujo Mono Basin 922304 Lujo Mono Basin +Clk Wst 922311 Araya Castillo Slim Mono Basin 922312 Araya Castillo Mono Basin 922313 Castillo Mono Basin +Clk Wst 922034 Araya Modern Mono Basin 922064 Araya Qt Mono Basin

Factor:

StH Westco Ltd

Company Name

StH Westco Ltd

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies incorporating chromium plated brass bodies, ceramic cartridge headwork with single lever operating member. The spout outlets incorporate either a plastic aerator or flow straightener. The 2565T1EP, 2565T3EP & 3565T5EP models are supplied with a check valve cartridge and filter on the inlets, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The 2565T1, 2565T3 & 2565T5 models have flow restrictors on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109034

Expiry date:

30/09/2026

Marking:

Delabie on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

2565T1, 2565T3 & 2565T5. 2565T1EP, 2565T3EP & 2565T5EP.

Factor:

Delabie Ltd.

Company Name

Delabie Ltd.

Address

1-3 Henderson House Hithercroft Road Wallingford Oxfordshire

Postcode

OX10 9DG

Country

United Kingdom

Phone

+44 1491 824 449

View All Listings by this Company

Manufacturer:

Delabie SAS

Company Name

Delabie SAS

Address

18 Rue Du Marechal Foch 80130 Friville Escarbotin

Country

France

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating a ceramic cartridge headwork and either cross top or a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with lever operated pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109042

Expiry date:

30/09/2026

Note:

No testing on pop-up waste.

Size:

PET braided, TpSiv lined flexible hose assembly with ½” BSP captive nut.

Marking:

Booth & Co. (brand of Vado) on indice.

Installation Requirements:

R001 R006 R009 R010

Model:

BC-AXB-100-CP. BC-AXB-100-BN BC-AXB-200-CP. BC-AXB-200-BN

Manufacturer:

Vado

Company Name

Vado

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

Somerset

Phone

Tel: 01934 744466

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see models) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products are supplied with either a lever type waste (model 39 034) or screw down waste (39 037). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109057

Expiry date:

30/09/2026

Size:

stainless steel or nylon braided, PEX lined flexible hoses with 3/8” BSP captive nut end connectors.

Marking:

Axor on body

Installation Requirements:

R001 R006 R009 R010

Model:

AXOR Citterio Single lever basin mixer 190 with pin handle 39 034 xxx pop-up waste set 39 037 xxx screw down waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109902

Expiry date:

30/09/2026

Note:

All models (apart from OR BASNW C) are supplied with an approved click type pop-up waste.

Size:

Stainless steel braided EPDM lined hoses with ½” BSP captive nut end connections

Marking:

Bristan on operating member

Installation Requirements:

R001 R006 R010

Model:

OR BAS C OR BASNW C BQDIV BAS C BRT OR BAS C BWY OR BAS C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (chrome plated brass) incorporating a ceramic cartridge headworks with single lever operating member. The spout outlets incorporate a plastic aerator. Model (PM BAS C) is supplied with a lever type pop-up waste. Maximum operating pressure 7.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109905

Expiry date:

30/09/2026

Note:

No testing on pop-up waste

Size:

Stainless steel braided, PEX lined hose assembly with 15mm compression end connections.

Marking:

Bristan on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

PM BAS C PM BASNW C.

Factor:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon

Postcode

B78 1SG

Country

Tamworth

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109912

Expiry date:

30/09/2026

Size:

Stainless steel braided EPDM hose assemblies incorporating ½” captive nut end connections/15mm compression.

Marking:

Bristan on body (models BQBEA BAS C & CLI BAS C) Bristan on operating member (NR BASNW C)

Installation Requirements:

R001 R006 R010

Model:

BQBEA BAS C CLI BAS C NR BASNW C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010100

Expiry date:

31/10/2025

Size:

Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts. Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nuts.

Marking:

KINGFISHER GOOD HOME LOGO OR SWIRL ON TAP BODY

Installation Requirements:

R001 R006 R009 R010

Model:

5059340109831, 5059340109848, 5059340109855, 5059340109909, 5059340109916 & 5059340109923 COMBINATION TAP ASSEMBLIES

Factor:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes). Incorporating a ceramic cartridge headworks, and various operating members. The spout outlet incorporates a flow straightener and is also supplied with an optional aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109306

Expiry date:

30/09/2026

Size:

Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

Bathroom Brands logo (stylised B) on rear of body.

Installation Requirements:

R001 R005 R009 R010

Model:

Arcade Range – chrome plated ACL12C AWL12C ABL12C ABBL12C ACL35C AWL35C ABL35C ABBL35C Arcade Range – nickel plated ACL12N AWL12N ABL12N ABBL12N ACL35N AWL35N ABL35N ABBL35N

Factor:

Bathroom Brands Group Limited.

Company Name

Bathroom Brands Group Limited.

Postcode

DA1 5FU

Country

United Kingdom

Phone

07775 491 559

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes). Incorporating a quarter turn ceramic disc headworks, and various operating members. The spout outlet incorporates a flow straightener. Product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109307

Expiry date:

30/09/2026

Note:

No testing has been performed on the pop-up waste.

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Marking:

Burlington London (brand of Bathroom Brands) on indice of operating member.

Installation Requirements:

R001 R006 R010

Model:

Stafford Range: STA11-QT - chrome plated

Factor:

Bathroom Brands Group Limited.

Company Name

Bathroom Brands Group Limited.

Postcode

DA1 5FU

Country

United Kingdom

Phone

07775 491 559

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with a fibre gasket for installation on each inlet hose. The product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109313

Expiry date:

30/09/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Gessi logo on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

35823

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109343

Expiry date:

30/09/2026

Size:

Stainless steel braided, PEX lined hose assemblies incorporating ½” captive nut.

Marking:

Vitra, on operating member, DoM on Body.

Installation Requirements:

R001 R006 R009 R010

Model:

Minimax S A41990VUK High basin mixer

Manufacturer:

Eczacibasi Building Materials Vitra Faucet Division

Company Name

Eczacibasi Building Materials Vitra Faucet Division

Address

4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik

Country

Turkey

Phone

+90 228 314 07 90

View All Listings by this Company

Single hole, single outlet deck mounted (fixed) combination tap assembly with soap dispenser and hand dryer appliances operated via an infra-red sensor. This product incorporates a solenoid valve and plastic flow restrictor. Maximum working pressure 10.0 bar. Maximum operating temperature 50°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109363

Expiry date:

30/09/2026

Note:

This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.

Size:

½” BSP (M)

Marking:

Wallgate logo (W) on fascia of tap.

Installation Requirements:

R001 R006 R009 R570

Model:

THRII-TAP+D ( Deck mounted)

Manufacturer:

Wallgate Limited

Company Name

Wallgate Limited

Address

Crow Lane Wilton Salisbury Wiltshire

Postcode

SP2 0HB

Phone

Tel: 01722 744594 Fax: 01722 742096

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109368

Expiry date:

30/09/2026

Note:

No testing on pop-up waste

Size:

Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

Kohler on body.

Installation Requirements:

R001 R006 R009 R010

Model:

14402W-4A-** Purist Monobloc. 14402W-4-** Purist Monobloc. ‘**’ denotes the surface finish (which is a non-water contact part). It will be 1-3 digits, which can be any combination of numbers and/or letters.

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road, Cheltenham, Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

+44 (0) 844 571 5000

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses have integral screwdriver operated isolation valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107038

Expiry date:

31/07/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating15mm compression end connections.

Marking:

Intatec logo, model and date of manufacture (MM/YY) on body.

Installation Requirements:

R001 R006 R010

Model:

LO980CP

Factor:

Intatec Ltd

Company Name

Intatec Ltd

Address

Airfield Industrial Estate, Hixon, Staffs.

Postcode

ST18 0PF

Country

United Kingdom

Phone

+44 1889 272 199

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chrome plated brass). Incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109377

Expiry date:

30/09/2026

Size:

Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections and supplied with a 3/8” BSP (M) adaptor.

Marking:

Gessi Emporio on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

38605

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110094

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR (brand of Hansgrohe SE) on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

39024XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set, 39023XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set, 39022XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39021XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39151XXX - AXOR Citterio - Single lever basin mixer 280 with lever handle for wash bowls with waste set - rhombic cut, 39081XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set - rhombic cut, 39071XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set - rhombic cut, 39001XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set - rhombic cut. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110303

Expiry date:

31/10/2026

Size:

Polyethylene terephthalate (PTE) braided TpSiv lined flexible hose assemblies incorporating EPDM washers & ½” captive nut end connections.

Marking:

Vado on body

Installation Requirements:

R001 R006 R009 R010

Model:

PHO-100M/DB-C/P PHA-200F/SB-C/P PHA-200FW/SB-CP PHA-200MF/SB-C/P SEN-100M/SB-C/P ZOO-100M/SB-C/P SEN-100F/SB-C/P ZOO-100F/SB-C/P ZOO-100FW/SB-CP LIF-100/SB-C/P LIF-100M/SB-C/P EDI-100M/SB-CP EDI-100/SB-C/P EDI-100/E/SB-C/P IND-EDI100M/SB-XXX IND-EDI100/SB-XXX IND-EDI100E/SB-XXX AX-MAT-100/SB-CP CHE-100-C/P AX-ROW-100-CP AX-ROW-100M/SB-CP MODELS ADDED JUNE 2022: SAME TAPS BUT WITH /CC = CLIC CLAC WASTE (WG-395-C/P) PHO-100M/CC-C/P PHA-200F/CC-C/P PHA-200FW/CC-CP PHA-200MF/CC-C/P SEN-100M/CC-C/P ZOO-100M/CC-C/P SEN-100F/CC-C/P ZOO-100F/CC-C/P ZOO-100FW/CC-CP LIF-100/CC-C/P LIF-100M/CC-C/P EDI-100M/CC-CP EDI-100/CC-C/P AX-MAT-100/CC-CP AX-ROW-100/CC-CP AX-ROW-100M/CC-CP xxx denotes the surface finish (which is a non-water contact part). It will be 2 or 3 digits, which can be any combination of letters. As examples: BRG = Brushed gold, PB = Polished black

Manufacturer:

Vado

Company Name

Vado

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

Somerset

Phone

Tel: 01934 744466

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some products are supplied with a pop-up waste or a click type waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110027

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

Hansgrohe Talis S Single lever basin mixer 80 range: 72 010 xxx with pop-up waste set, 72 011 xxx with push-open (click type) waste set, 72 012 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 CoolStart range: 72 013 xxx with pop-up waste set, 72 014 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 LowFlow range: 72 015 xxx with pop-up waste set, 72 018 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 range: 72 020 xxx with pop-up waste set, 72 021 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 CoolStart range: 72 022 xxx with pop up waste set, 72 023 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 LowFlow 72 024 xxx with pop up waste set, 72 025 xxx without pop-up waste. Hansgrohe Talis S Single lever basin mixer 190 range: 72 031 xxx with pop-up waste, 72 032 xxx without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Ragfe of single hole, single outlet (fixed) combination tap assembly with stainless steel bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator with an integral flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110364

Expiry date:

31/10/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

QTOO (brand of D Line) on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

QT1150xxx Single hole mixer. QT1151xxx Single hole mixer with short lever pin. Where xxx denotes the finish and can be replaced by 1 to 3 digits: M = brushed stainless steel finish. PP1 = polished PVD gunmetal finish.

Factor:

D Line

Company Name

D Line

Address

Roskildevej 22 2620 Albertslund

Country

Denmark

Phone

+4572170138

General Email

service@dline.com

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product supplied with an approved click-type pop up waste. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110900

Expiry date:

31/10/2026

Marking:

Bristan on the operating member.

Installation Requirements:

R001 R006 R010

Model:

J BAS C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 100 xxx model is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110072

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R006 R009 R010

Model:

36 100 xxx AXOR Citterio E Single lever basin mixer 130 with pop-up waste set. 36 101 xxx AXOR Citterio E Single lever basin mixer 130 with waste set. 36 102 xxx AXOR Citterio E Single lever basin mixer 90 for hand washbasins with waste set. 36 103 xxx AXOR Citterio E Single lever basin mixer 190 for wash bowls with waste set. 36 104 xxx AXOR Citterio E Single lever basin mixer 250 for wash bowls with waste set. 36 105 xxx AXOR Citterio E Pillar tap 90 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses have integral screwdriver operated isolation valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107134

Expiry date:

31/07/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating15mm compression end connections.

Marking:

Intatec logo and date of manufacture (MM/YY) on body.

Installation Requirements:

R001 R006 R010

Model:

DMIXER

Factor:

LECICO

Company Name

LECICO

Address

2 D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD

Postcode

MK410QB

View All Listings by this Company

Manufacturer:

Intatec Ltd

Company Name

Intatec Ltd

Address

Airfield Industrial Estate, Hixon, Staffs.

Postcode

ST18 0PF

Country

United Kingdom

Phone

+44 1889 272 199

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet has a plastic aerator and model 31 531 XXX is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111034

Expiry date:

30/11/2026

Size:

Stainless steel braided, PEX lined hoses assemblies incorporating 3/8" captive nut end connection.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

Hansgrohe Focus Single lever basin mixer 230 31 531 xxx 31 532 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated) incorporating a joystick controlled ceramic cartridge headwork. The spout outlets incorporate a plastic aerator. Models 39 031 xxx & 39 035 xxx are supplied with lever operated pop-up wastes and model 39 032 xx is supplied with a pop-up waste kit. Maximum working pressure: 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111039

Expiry date:

30/11/2026

Note:

No testing has been performed on the pop-up waste

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" captive nuts end connections.

Marking:

Axor on body.

Installation Requirements:

R001 R006 R009 R010

Model:

39 031 xxx Axor Citterio Single lever basin mixer 160 39 032 xxx Axor Citterio Single lever basin mixer 160 39 035 xxx Axor Citterio Single lever basin mixer 90 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes ), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Fittings are supplied with click type wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110316

Expiry date:

31/10/2026

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Methven on operating member. DTC53 (brand of Methven) on body.

Installation Requirements:

R001 R006 R010

Model:

Motu range: MTTBXX – Tall Mixer MTBXX – Basin Mixer MTBMXX – Mini Basin Mixer Tasman range: TMTBXX – Tasman Tall Mixer TMBXX – Tasman Basin Mixer TMBMXX – Tasman Mini Basin Mixer From January 2022 the following models are no longer provided with a click type waste: MTTBCP MTTBBK MTTBBB MTTBGM MTTBBN TMTBCP TMTBBK Where xxx denotes the surface finish: CP – Chrome BK – Matte Black Plated BB – Brushed Brass Plated BN – Brushed Nickel Plated GN – Gunmetal Plated

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type pop-up waste. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111900

Expiry date:

30/11/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Bristan on the operating member

Installation Requirements:

R001 R006 R010

Model:

BRT SQU SMBAS C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111902

Expiry date:

30/11/2026

Size:

Stainless steel braided EPDM lined flexible hoses assemblies with ½” BSP captive nut end connections.

Marking:

Bristan on operating member

Installation Requirements:

R001 R006 R010

Model:

SM SMBAS C & OR SMBAS C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole single outlet fixed combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The product incorporates a plastic flow regulator in the spout body, and a plastic aerator in the spout outlet. Certain models are supplied with click type waste (See models). Maximum working pressure 10 bar. Maximum working temperature 60 °C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111040

Expiry date:

30/11/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nuts.

Marking:

Dornbracht on front of spout

Installation Requirements:

R001 R006 R009 R010

Model:

33500811- Click waste 33505811- Click waste 33521811- Without click waste 33525811- Without click waste

Manufacturer:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 D-58640 Iserlohn Germany

Phone

+49 2371 433 0

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111806

Expiry date:

30/11/2026

Note:

No testing performed on pop-up waste.

Size:

15mm copper tails

Marking:

SPELPRO on operating member.

Installation Requirements:

R001 R006 R010

Model:

SPELPRO PROXIMA LONG LEVER BASIN MIXER COMBINATION TAP ASSEMBLY

Factor:

Splashback

Company Name

Splashback

Address

Unit D Thistle Business Park The Showground

Postcode

TA6 6LS

Country

Bridgewater

Phone

01278 455020

General Email

info@spelpro.com

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001931

Expiry date:

31/01/2025

Size:

Stainless steel braided PEX lined hose assemblies, incorporating a ½” captive nut end connection.

Marking:

Bristan on front of body

Installation Requirements:

R001 R006 R010

Model:

BRT SPH BAS C COMBINATION TAP ASSEMBLIES

Factor:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon

Postcode

B78 1SG

Country

Tamworth

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Wall mounted single-hole, single outlet, fixed, combination tap assembly with a brass body in a variety of finishes (See models). Incorporating a ceramic disc headwork with a dome type operating member. The temperature is controlled separately via a rotary ceramic cartridge headwork that can also be used as a shut off with a dome type operating member. The inlets to the tap incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator and plastic flow regulator. Maximum working pressure 10 bar. Maximum working temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2112056

Expiry date:

31/12/2026

Size:

For use with basic set 10 902 180 which has ½” BSP female inlets

Marking:

AXOR on wall plate

Installation Requirements:

R001 R010 R040

Model:

12 015 xxx 10 902 180 (Basic set) Where “xxx” denotes the finish. -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company