'YHCM-01'. Factory applied, grey coloured sulphate resisting cementitious mortar. Mix sand, cement & water in a ratio of 1: 2.5: 0.3. Cure for 4 hours@20°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Ferolite NAM 30'. Green coloured fibre/NBR gasket material manufactured by calendaring. Shore hardness 42A. For use with water up to 65°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.
'S-006'. Cream coloured, compression moulded GRP panel. For use with water up to 23°C.
'S-002'. Cream coloured, compression moulded GRP panel. For use with water up to 23°C.
'G.Beslux Bessil EH-00 Silicone Paste'. White coloured, opaque silicone grease/paste. For use with water up to 85°C.
'Tecnite SC 250 W Lubricating Grease'. Uncoloured (translucent) silicone oil/grease. For use with water up to 85°C.
'IKV Tribostar SSI 1203TF/IKV Tribofood SSI 1203TF'. Translucent, white coloured silicone greases. Apply as per manufacturer's instructions. For use with water up to 85°C.
'RILSAN® BUM 30 O'. Grey coloured, injection moulded PA material. For use with water up to 23°C.
'CP Polytec 80A'. Extruded polyethylene pipe comprising of a blue coloured outer layer and black coloured inner layer. For use with water up to 23°C.
'FYPBK-01 PE Pipes Black & Blue'. Extruded, HDPE pipes which are either black coloured (with blue, external stripe) or blue coloured. For use with water up to 65°C.
'FYFBK-01 PE Fittings Black & Blue'. Injection moulded, HDPE fittings which are either black coloured or blue coloured. For use with water up to 65°C.
Dowlex NG2432UE. Dowlex NG2432.10UE. RX 103 Natural. RX 103 Black 9003. RX 103 GR Black 9003. Natural and black coloured, rotationally moulded polyethylene material. For use with water up to 70°C.
'Purithon PPSU P5010 NC (natural, appears brown coloured), P5010 WH (white coloured), P5010 BK (black coloured), P5010 GY (grey coloured) & P5010 BL (blue coloured)'. Injection moulded PPSU materials. For use with water up to 85°C.
'F1100'. White coloured, extruded PTFE material. For use with water up to 85°C.
'F550'. Black coloured, extruded, carbon filled PTFE material. For use with water up to 85°C.
'G310'. Blue coloured, extruded PTFE material. For use with water up to 85°C.
'Cepex PVC-U Fittings (beginning with product code of 05)'. Grey coloured, injection moulded PVC-U fittings. For use with water up to 23°C.
'GJ-yzxj-V40 EPDM valve seat'. Black coloured, compression moulded EPDM valve seat. Shore hardness 70. Tested in-radius size 3.5mm. For use with water up to 85°C.
'EPDM4570‐70/Jinan Hongde Gasket'. Black coloured, compression moulded gaskets. Shore hardness 70. Tested in-radius 2.0mm. For use with water up to 85°C.
'Qmonix® 558CH'. Black coloured, transfer moulded, EPDM 'O' rings. Shore hardness 70. Tested in-radius size 0.85mm. For use with water up to 85°C.
Page 64 of 554
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
