Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies, various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail (see models). Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

250502024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tails (10mm spigot) or the braided hose (15mm spigot), this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.

Size:

15mm compression

Marking:

DVS logo on body

Installation Requirements:

R001 R006 R007 R010

Expiry date:

31/05/2030

Model:

Aquarius A32: AT03-001 (Stainless steel and braided hose) AT03-002 (Stainless steel and copper tails) AT03-003 (Polished stainless steel and braided hose) AT03-004 (Polished stainless steel and copper tails) Aquarius A45: AT03-011 (Stainless steel and braided hose) AT03-012 (Stainless steel and copper tails) AT03-013 (Polished stainless steel and braided hose) AT03-014 (Polished stainless steel and copper tails) Aquarius A45 Doc M: AT03-021 (Stainless steel and braided hose) AT03-022 (Stainless steel and copper tails) AT03-023 (Polished stainless steel and braided hose) AT03-024 (Polished stainless steel and copper tails) Aquarius Short Neck: AT03-031 (Stainless steel and braided hose) AT03-032 (Stainless steel and copper tails) AT03-033 (Polished stainless steel and braided hose) AT03-034 (Polished stainless steel and copper tails) Aquarius High Neck: AT03-041 (Stainless steel and braided hose) AT03-043 (Polished stainless steel and braided hose) Aquarius Pillar Tap: AT03-051 (Chrome and braided hose) AT03-061 (Chrome and braided hose)

Approval Holder:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company

Manufacturer:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company

Floor standing single hole, single outlet (fixed) combination tap assembly (chrome plated brass) body, incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The outlet to the shower incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:

0466 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

WRAS Approval Number:

250502037

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

SONAS on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

UBR0146 (in Chrome) UBR0147 (in Matt Black) UBR0148 (in Brushed Nickel) UBR0149 (in Brushed Gold)

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

View All Listings by this Company

Range of shower kits with a shower hose, handset and shower rail. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250512003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Sonas on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

USH0213 USH0214 USH0215

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

View All Listings by this Company

Manufacturer:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

View All Listings by this Company

Range of one piece (black) plastic storage cisterns supplied with a screened vent. Cold water use only.

Section:

0120 Cisterns Storing Water for Domestic Purposes

Section Subtitle:

Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

250604716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Harlequin, model and product information on adhesive label on body.

Installation Requirements:

R001 R270 R350

Expiry date:

30/06/2030

Model:

PW920SL – 920 litre slimline. PW1100SL – 1100 litre slimline. PW1200LP – 1200 litre low profile. PW1400VT – 1400 litre vertical. PW1800VT – 1800 litre vertical, PW2700VT – 2700 litre vertical. PW3800VT – 3800 litre vertical. PW5700VT – 5700 litre vertical. PW7500VT – 7500 litre vertical. PW9250VT – 9250 litre vertical.

Approval Holder:

Harlequin Manufacturing Limited

Company Name

Harlequin Manufacturing Limited

Address

21 Clarehill Road, Moira, Co Armagh, N. Ireland

Postcode

BT67 0PB

Phone

02892 611 077

General Email

info@harlequin-mfg.com

View All Listings by this Company

Range of deck mounted ceramic cartridge and single sequential headwork assemblies, (brass bodies – various styles and finishes), incorporating a range of operating members. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

250604028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless Steel braided EPDM lined hose assemblies incorporating 3/8” captive end connections.

Marking:

THG on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

6523/W - ceramic cartridge headwork 6532/W - sequential ceramic cartridge headworks 6523/W Styles: A04 - Broadway - Man, A1J - Amboise Malachite, A1K - Amboise Lapis Lazuli, A1L - Amboise Jaspe rouge, A1M - Amboise Onyx noir, A1S - Cheverny Malachite, A1T - Cheverny Lapis Lazuli, A1U - Cheverny Jaspe rouge, A1V - Sully Malachite, A1W - Sully Lapis Lazuli, A1X - Sully Jaspe rouge, A2A - Métropolis cristal clair, A2B - Métropolis cristal clair - Man, A2C - Océania, A2E-Venice, A2F - Naïade, A2G-Ange, A2H - Panthère cristal clair, A2I - Perle, A2J - Papillon, A2K - Panthère cristal noir, A2L - Métropolis cristal noir, A2M - Métropolis cristal noir - Man, A2R - Masque de Femme lunaire, A2S - Masque de Femme solaire, A2T - Masque de Femme, métal gravé, A2U - Masque de Femme, métal lisse, A33 - Bambou cristal noir, A35 - Bambou cristal clair, A38 - Niagara, A52 - Broadway, A54 - Art Déco, A55 - Art Déco - Man, A56 - Art Déco Cristal, A57 - Tradition, A58 - Tradition - Man, A59 - Tradition Cristal, A60 - Marina Onyx noir, A61 - Marina métal, A6A - Profil métal, A6B - Profil métal - Man, A6G - Profil Lalique cristal clair, A6H - Profil Lalique cristal clair - Man, A6N - Profil Onyx noir, A6P - Profil Onyx noir - Man, A7A - Ithaque décor Or, A7B - Ithaque décor Platine, A7D - Capucine mauve décor Or, A7E - Capucine vert décor Platine, A7F - Marquise noir décor Or, A7G - Marquise blanc décor Platine, A8B - Vogue Améthyste, A8M - Vogue Malachite, A8N - Vogue Jaspe rouge, A8P - Vogue Onyx noir, A8R - Vogue Oeil de tigre, A8S - Vogue Lapis Lazuli, A9B - Jaipur cristal satiné, A9C - Jaipur Onyx noir, A9D - Jaipur Quartz rose, A9F - Jaipur métal, E53 - Najem, G04 - Pure, G08 - Pompadour, G13 - Rochambeau, G14 - Versailles, G1T - Beluga, G1U - Beluga - Man, G25 - 1900, G28 - 1900 - Man, G29 - Charleston, G2H - Le 9, G2J - Faubourg porcelaine blanche - Man, G2K - Faubourg porcelaine blanche, G2L - Faubourg porcelaine noire, G2M - Faubourg porcelaine noire - Man, G2N - Froufrou, G2P-Froufrou - Man, G2R - Frivole, G2S - Frivole - Man, G2T - Faubourg métal, G2U - Faubourg métal - Man, G3M - 1900 - Man. métal lisse, G47 - Vendôme, G4P - Collection "O", G50 - Tango, G58 - Spirit - Man, G5A - Nano, G5B - Nano - Man, G64 - Primo, G69 - Spirit, G6A - Métamorphose, G6B - Métamorphose - Man, G6C - Métamorphose carbone, G6D - Métamorphose céramique noire, G6E - Métamorphose céramique blanche, G75 - Charleston - Man, G78 - Tendance, G79 - Cubica, G7A - Beaubourg, G7B - Beaubourg - Man, G7C - Saint-Germain, G7D - Saint-Germain - Man, G7E - Dean, G7F-Bondi, G7G - Bondi - Man, G8A - Les Ondes, G8B - Les Ondes - Man, G9A - SYSTEM métal lisse, G9B - SYSTEM métal lisse - Man, G9C - SYSTEM métal diamant, G9D - SYSTEM métal diamant - Man, G9E - SYSTEM métal quadrillé, G9F - SYSTEM métal quadrillé - Man, G9G - SYSTEM marbre Howlite, G9H - SYSTEM marbre Howlite - Man, G9J - SYSTEM cristal, G9K - SYSTEM cristal - Man, J17 - Beverley, U1A - Mandarine métal, U1D - Mandarine cristal clair, U1E - Mandarine cristal clair satiné, U1K - Mandarine Cristallia Diamant, U1V - Cheverny Onyx noir, U2A - Le 11 by Alberto Pinto, U2B - Le 11 by Alberto Pinto - Man, U2L - Nihal porcelaine bleue, U2M - Nihal métal lisse, U2N - Nihal porcelaine ivoire, U2P - Nihal porcelaine noire, U2R - Nihal porcelaine verte, U4A - Diplomate bagues lisses, U4B - Diplomate bagues annelées, U4D - Diplomate Royale, U4E - Duomo, U4F - Duomo cristal, U6A - Pétale de Cristal clair, U6B - Pétale de Cristal bleu, U6C - Pétale de Cristal rouge, U6D - Pétale de Cristal noir, U6E - Pétale de Cristal clair liseré doré, U7A - Trocadéro Malachite, U8B - Monte Carlo porcelaine or, U8C - Monte Carlo porcelaine or blanc, U9A - West Coast croisillon métal, U9B - West Coast manette métal, U9C - West Coast croisillon guilloché lin, U9D - West Coast manette guilloché lin, U9E - West Coast croisillon onyx noir, U9F - West Coast manette onyx noir, U9G - West Coast croisillon onyx blanc, U9H - West Coast manette onyx blanc, U9K - Grand Central croisillon métal, U9L - Grand Central manette métal, U9M - Grand Central croisillon onyx noir, U9N - Grand Central manette onyx noir, U9R - Grand Central croisillon onyx blanc, U9S - Grand Central manette onyx blanc. 6532/W Styles: A04 - Broadway à manettes, A1J - Amboise Malachite, A1K - Amboise Lapis Lazuli, A1L - Amboise Jaspe rouge, A1M - Amboise Onyx noir, A1S - Cheverny Malachite, A1T - Cheverny Lapis Lazuli, A1U - Cheverny Jaspe rouge, A1V - Sully Malachite, A1W - Sully Lapis Lazuli, A1X - Sully Jaspe rouge, A2A - Métropolis cristal clair, A2B - Métropolis cristal clair à manettes, A2C - Océania, A2E - Venice, A2F - Naïade, A2G - Ange, A2H - Panthère cristal clair, A2I - Perle, A2J - Papillon, A2K - Panthère cristal noir, A2L - Métropolis cristal noir, A2M - Métropolis cristal noir à manettes, A2N - Mossi cristal clair, A2R - Masque de Femme lunaire, A2S - Masque de Femme solaire, A2T - Masque de Femme, métal gravé, A2U - Masque de Femme, métal lisse, A33 - Bambou cristal noir, A34 - Bambou cristal Ambre, A35 - Bambou cristal clair, A38 - Niagara, A41 - Dahlia, A42 - Pomme cristal clair satiné, A44 - Ellipse, A46 - Pomme cristal lustré or, A52 - Broadway, A54 - Art Déco, A55 - Art Déco à manettes, A56 - Art Déco Cristal, A57 - Tradition, A58 - Tradition à manettes, A59 - Tradition Cristal, A60 - Marina Onyx noir, A61 - Marina métal, A6A - Profil métal, A6B - Profil métal à manettes, A6G - Profil Lalique cristal clair, A6H - Profil Lalique cristal clair à manettes, A6N - Profil Onyx noir, A6P - Profil Onyx noir à manettes, A7A - Ithaque décor Or, A7B - Ithaque décor Platine, A7D - Capucine mauve décor Or, A7E - Capucine vert décor Platine, A7F - Marquise noir décor Or, A7G - Marquise blanc décor Platine, A8B - Vogue Améthyste, A8M - Vogue Malachite, A8N - Vogue Jaspe rouge, A8P - Vogue Onyx noir, A8R - Vogue Oeil de tigre, A8S - Vogue Lapis Lazuli, A9B - Jaipur cristal satiné, A9C - Jaipur Onyx noir, A9D - Jaipur Quartz rose, A9F - Jaipur métal, E53 - Najem, G04 - Pure, G08 - Pompadour, G13 - Rochambeau, G14 - Versailles, G1T - Beluga, G1U - Beluga à manettes, G24 - Amour de Trianon, G25 - 1900, G28 - 1900 à manettes, G29 - Charleston, G2H - Le 9, G2J - Faubourg porcelaine blanche à manettes, G2K - Faubourg porcelaine blanche, G2L - Faubourg porcelaine noire, G2M - Faubourg porcelaine noire à manettes, G2N - Froufrou, G2P - Froufrou à manettes, G2R - Frivole, G2S - Frivole à manettes, G2T - Faubourg métal, G2U - Faubourg métal à manettes, G31 - Cygne, G3R - Montaigne marbre Grand Antique, G3S - Montaigne marbre Grand Antique à manettes, G3T - Montaigne marbre Leonardo Grey, G3U - Montaigne marbre Leonardo Grey à manettes, G3V - Montaigne marbre blanc Vénus, G3W - Montaigne marbre blanc Vénus à manettes, G47 - Vendôme, G4P - Collection "O", G50 - Tango, G58 - Spirit à manettes, G5A - Nano, G5B - Nano à manettes, G5D - Anoa corne noire, G5E - Soho, G64 - Primo, G69 - Spirit, G6A - Métamorphose, G6B - Métamorphose à manettes, G6C - Métamorphose carbone, G6D - Métamorphose céramique noire, G6E - Métamorphose céramique blanche, G75 - Charleston à manettes, G78 - Tendance, G79 - Cubica, G7A - Beaubourg, G7B - Beaubourg à manettes, G7C - Saint - Germain, G7D - Saint - Germain à manettes, G7E - Dean, G7F - Bondi, G7G - Bondi à manettes, G8A - Les Ondes, G8B - Les Ondes à manettes, G9A - SYSTEM métal lisse, G9B - SYSTEM métal lisse à manettes, G9C - SYSTEM métal diamant, G9D - SYSTEM métal diamant à manettes, G9E - SYSTEM métal quadrillé, G9F - SYSTEM métal quadrillé à manettes, G9G - SYSTEM marbre Howlite, G9H - SYSTEM marbre Howlite à manettes, G9J - SYSTEM cristal, G9K - SYSTEM cristal à manettes, J17 - Beverley, O01 - LUXURY COLLECTION, O02 - MASTER COLLECTION, U1A - Mandarine métal, U1D - Mandarine cristal clair, U1E - Mandarine cristal clair satiné, U1K - Mandarine Cristallia Diamant, U1S - Sully Onyx blanc, U1T - Sully Onyx noir, U1V - Cheverny Onyx noir, U2A - Le 11 by Alberto Pinto, U2B - Le 11 by Alberto Pinto à manettes, U2D - INFINI porcelaine blanche, U2E - INFINI porcelaine blanche décor platine, U2F - INFINI porcelaine blanche décor or, U2K - So, U2L - Nihal porcelaine bleue, U2M - Nihal métal lisse, U2N - Nihal porcelaine ivoire,U2P - Nihal porcelaine noire, U2R - Nihal porcelaine verte, U3A - Bagatelle métal, U3B - Bagatelle métal à manettes, U3E - Bagatelle pierre noire, U3F - Bagatelle pierre noire à manettes, U4A - Diplomate bagues lisses, U4B - Diplomate bagues annelées, U4C - Diplomate bagues torsadées, U4D - Diplomate Royale, U4E - Duomo, U4F - Duomo cristal, U5A - Flore, U5B - Island, U5C - Paradise, U5D - Sun Dragon, U5E - Ginkgo, U5F - Vegetal, U5G - Moon Dragon, U5H - Jade Dragon, U5J - Rose, U6A - Pétale de Cristal clair, U6B - Pétale de Cristal bleu, U6C - Pétale de Cristal rouge, U6D - Pétale de Cristal noir, U6E - Pétale de Cristal clair liseré doré, U6F - Beyond Crystal - cristal clair, U6G - Beyond Crystal - cristal aqua, U6H - Beyond Crystal - cristal rouge, U6J - Beyond Crystal - cristal couleur champagne, U6K - Beyond Crystal - cristal bleu, U7A - Trocadéro Malachite, U7B - Trocadéro Lapis Lazuli, U7C - Trocadéro Jaspe Rouge, U7D - Trocadéro Onyx noir, U7E - Trocadéro Oeil de Tigre, U8A - Wedding, U8B - Monte Carlo porcelaine or, U8C - Monte Carlo porcelaine or blanc, U93 - Malmaison métal, U94 - Malmaison cristal, U95 - Malmaison Portoro, U97 - Malmaison Howlite, U9A - West Coast croisillon métal, U9B - West Coast manette métal, U9C - West Coast croisillon guilloché lin, U9D - West Coast manette guilloché lin, U9E - West Coast croisillon onyx noir, U9F - West Coast manette onyx noir, U9G - West Coast croisillon onyx blanc, U9H - West Coast manette onyx blanc, U9K - Grand Central croisillon métal, U9L - Grand Central manette métal, U9M - Grand Central croisillon onyx noir, U9N - Grand Central manette onyx noir, U9R - Grand Central croisillon onyx blanc, U9S - Grand Central manette onyx blanc. Styles added May 2021: A4J Hirondelle cristal clair A4K Hirondelle cristal clair décor platine A4L Hirondelle cristal clair décor Or U7G Icon-X U7H Icon-X à manettes U7J Icon-X, insert métal U7K Icon-X à manettes, insert métal U7L Icon-X, Titane U7M Icon-X à manettes, Titane U7N Icon-X, pierre à définir U7P Icon-X à manettes, pierre à définir U7S Icon-X , Carbone or U7T Icon-X à manettes, Carbone or U8D Corvair U8E Corvair à manettes U8F Corvair marbre Howlite U8G Corvair à manettes marbre Howlite U8H Corvair marbre Portoro U8J Corvair à manettes marbre Portoro U8K Corvair marbre Fior di Bosco U8L Corvair à manettes marbre Fior di Bosco U8M Corvair pierre à définir U8N Corvair à manettes pierre à définir Finishes: A02-Polished chrome ; B01-Polished nickel ; C01-Matt nickel ; D01-Lacquered light bronze ; D05-Lacquered mat bronze ; D30-Black ceram ; F01-polished gold ; F07-matt gold ; F30-soft gold ; F31-soft matt gold ; F33-Bronze brown color PVD ; F34-Matt brown bronze color PVD ; H49-Brass color PVD ; H50-Matt brass color PVD ; H52-Gold color PVD ; H53-Matt gold color PVD ;H55-nickel color PVD ; H56-Matt nickel color PVD ; H60-Matt blush color PVD ; H62-Blush color PVD ; H64-Graphite color PVD ; H65-Matt graphite color PVD ; H66-Umber color PVD ; H67-Matt umber color PVD.

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (DZR brass main body - various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250604021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½ “ BSP (M).

Marking:

Axor on the spout.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

16 532 xx0 AXOR Montreux 3-hole basin mixer for concealed installation wall-mounted with spout 165 - 225 mm and cross handles 16 534 xx0 AXOR Montreux 3-hole basin mixer for concealed installation wall-mounted with spout 165 - 225 mm and lever handles 39 143 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 222 mm, cross handles and escutcheons 39 144 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 226 mm, cross handles and plate 39 147 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 222 mm, lever handles and escutcheons 39 148 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 226 mm, lever handles and plate 39 313 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 162 mm, cross handles and escutcheons 39 315 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 162 mm, lever handles and escutcheons Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of filter shower handsets and tap outlets with plastic bodies with EPDM O-Rings Open Outlet use. Maximum operating temperature 60°C

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Aquatools logo, Model and other information on adhesive label on body

Installation Requirements:

R001 R150 R170

Expiry date:

30/06/2030

Model:

1/2" BSP (M) AT030711CP, AT030723CP, AT030713CP, AT030715CP, AT030714CP, AT030724CP, AT030725CP Ø10.9 AT030717CP, AT030727CP, AT030719CP, AT030721CP, AT030729CP, AT030747CP, AT030730CP, AT030718CP, AT030728CP, AT030720CP, AT030722CP, AT030739CP, AT030748CP, AT030740CP, AT030767CP, AT030768CP, AT030741CP, AT030742CP

Manufacturer:

AQUATOOLS HYGIENE LTD

Company Name

AQUATOOLS HYGIENE LTD

Address

1-3 Henderson house Hithercroft Road Wallingford Oxfordshire OX10 9DG

View All Listings by this Company

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351024: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 67×35. GM5011-6754: 67×54. GM5011-7654: 76×54. GM5011-8954: 89×54. GM5011-8976: 89×76. GM5011-10854: 108×54. GM5011-10876: 108×76. GM5011-10889: 108×89. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 67, 76/76.1, 88.9/89, 108).

Product Images

Approval Holder:

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Address

NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

GD Press, size, 304L, model number on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Grande-tek Flow Control Co., Ltd

Company Name

Grande-tek Flow Control Co., Ltd

Address

Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei

Postcode

061000

Country

China

View All Listings by this Company

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 25mm, ½” – 1”.

Marking:

Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of under counter electric instantaneous water heaters with stainless steel tank and heating element. Open outlet use only. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250604712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DAOMENG logo printed on front panel. DAOMENG logo; Pressure, Capacity, Model No and product info on data label.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

DM001, 241450, S2, S5.

Approval Holder:

GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD

Company Name

GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD

Address

17, B Building He Sui Industrial Avenue Dongheping Village Dongfeng Town Zhongshan City. Guangdong Province.

Country

China

Phone

18676009191

General Email

18666151668@163.com

View All Listings by this Company

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. Some models, please refer to model below, incorporate only a primary circuit. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

250602716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Warmhaus on front panel. Warmhaus, product name and operating info on label on side panel

Installation Requirements:

R001 R140 R360

Expiry date:

30/06/2030

Model:

Following models are ¾” BSP M inlet/outlet primary circuit, ½” BSP M inlet/outlet secondary circuit. KM0725250101005901 EWA 2525C 25KW KM0725300101005901 EWA 2530 C 30 KW KM0725310303008701 MINERWA 25/31 COMBI BOILER IE (BLACK) KM0725300201008901 ENERWA PLUS 2530 C - UK KM0325300201001301 ENERWA PLUS 2530 C - UK + FLUE KIT KM0730350201008901 ENERWA PLUS 3035 C - UK KM0330350201001301 ENERWA PLUS 3035 C + F.KIT - DHW 35 - UK KM0735400201008901 ENERWA PLUS 3540 C - UK KM0335400201001301 ENERWA PLUS 3540 C - UK KOMBI KM0742400201001301 ENERWA PLUS 4240 C 40 KW - UK KM0745430201001301 ENERWA PLUS 4543 C 43 KW - UK KM0725310303009801 EXP.MINERWA 25 SYSTEM BOLER (BLACK) KM1220240101012201 GLOWA 2024 KM1224260101012201 GLOWA 2426 KM1228300101012201 GLOWA 2830 KM1233350101012201 GLOWA 3335 KM1220240101012401 GLOWA SMART 20/24 20KW KM1224260101012401 GLOWA SMART 24/26 24KW KM1228300101012401 GLOWA SMART 28/30 28KW KM1233350101012401 GLOWA SMART 33/35 33KW Following models are ¾” BSP M inlet/outlet and are primary circuit only KM1024000201005501 EXP.ENERWA PLUS H.O 2500H KM1024000201010201 EXP. WARMHAUS ENERWA PLUS H.O 2500H - UK KM1028000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3000H KM1028000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3000H - UK KM1033000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H KM1033000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3500H - UK KM1133000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H+F.KIT KM1133000201006201 EXP.WARMHAUS ENERWAPLUS HO 3500H-D+F.KIT KM1142000201005501 ENERWA PLUS H.O 4200H KM1145000201005501 ENERWA PLUS H.O 4500H KM1220000101012301 GLOWA 20 H.O. KM1224000101012301 GLOWA 24 H.O. KM1228000101012301 GLOWA 28 H.O. KM1233000101012301 GLOWA 33 H.O.

Manufacturer:

Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.

Company Name

Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.

Address

Nilufer Organise Sanayi Bolgesi Selvi Cad No:3 Nilufer Bursa Turkey

Phone

+90-224-2959400

View All Listings by this Company

Range of water meters with brass and plastic bodies and plastic turbines. The inlet incorporates a plastic filter Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” to 2 ½” BSP M (G models) DN 50 flanged (FL Models)

Marking:

Zenner logo, Model, ZR, CE, date of manufacture (YYYY) and other information on faceplate. Flow arrow and date of manufacture (YYYY) on body.

Installation Requirements:

R001 R008

Expiry date:

30/06/2030

Model:

145118 MTKD-M 2,5-165-G ¾ B (½) 144835 MTKD-M 4-190-G 1 B (¾) 145132 MTKD-M 6,3-260-G 1 ¼ B (1) 144837 MTKD-M 10-260-G 1 ¼ B (1) 145115 MTKD-M 10-260-G 1 ½ B (5/4) 145117 MTKD-M 16-300-G 2 B (6/4) 174240 MTKD-M 25-270-G 2 ½ B (2) 145446 MTKD-M 25-300- G 2 ½ B (2) 145448 MTKD-M 25-270-FL 145447 MTKD-M 25-300-FL 134886 MTKD-L-M 2,5-165-G ¾ B (½) 147662 MTKD-L-M 4-190-G 1 B (¾)

Manufacturer:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company

Range of wall mounted self-closing taps (chromium plated brass) with a dome type operating member. The SCHELL PETIT SC - 02 147 06 99 model incorporates a screwdriver operated servicing valve on the inlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

250604029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Schell on operating member

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

02 136 06 99 - SCHELL PETIT SC 02 147 06 99 - SCHELL PETIT SC

Approval Holder:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

Manufacturer:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

250402712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.

Marking:

DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ED50A SD40A SD45A SD50A SXD45 SXD50 PG/PD40A PG/PD45A PG/PD50A OG/OD40A OG/OD50A ED900A SD900A SD1000A SD1300A SD1350A PD1000A PD1300A PD1350A OD1400A OD1425A OD1450A X600A X700A W110A W1400A W1400SA Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:

DC Products Ltd

Company Name

DC Products Ltd

Address

Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset

Postcode

BA5 1EY

View All Listings by this Company

Range of water conditioners with stainless steel bodies. AFL012 MFB has a matt black finish and AFL012MFC has a chrome plate finish. Models with compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Activflo, model and PN on adhesive label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

AFL010 - Activflo Lite Water Conditioner - 1” BSP Male, AFL012 - Activflo Lite Water Conditioner - ½” BSP Male, AFL012MFB - Activflo Solo Lite - 1/2" MBSP X 1/2 FBSP, AFL012MFC - Activflo Solo Lite - 1/2" MBSP X 1/2" FBSP, AFL034 - Activflo Lite Water Conditioner- 3/4” BSP Male, AFL0112 - ACTIVFLO LITE - 1 1/2" X 1 1/2" MBSP, AFL0114 - ACTIVFLO LITE - 1 1/4" X 1 1/4" MBSP, AFL015 - Activflo Lite Water conditioner - 15mm x 15mm compression, AFL022 - Activflo Lite Water conditioner - 22mm x 22mm compression, AFL028 - Activflo Lite Water conditioner - 28mm x 28mm compression.

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250602017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.

Marking:

Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Approval Holder:

Waterworks

Company Name

Waterworks

Address

60 Backus Ave, Danbury, CT 06810

Country

USA

Phone

(203) 546 6140

View All Listings by this Company