Directory Search Results

Print List

#250815307

Section:
1660 Shower Outlets
Description:
A Shower hose(s)
EPDM lining With Stainless steel.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/08/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
JD-PS***-**-****F1/2, M15*1Open outlet use only bar85 °CKind, WRAS, Production date(MM.YYYY)FerruleNo

Notes & Further Information

Note: 1. 1st *** denotes the hose length: 15-300cm: E.g., 015 = 15cm, 100 = 100cm, 200 = 200cm. 2. 2nd ** denotes the hose size: 06=DN6, 07=DN7 3. 3rd **** denotes the connections, and can be replaced with any of the following: 01=F1/2 05=M15*1

Product Images

Approval Holder:
Guangzhou Kind Architecture Material Technology Co., Ltd.
Company Name
Guangzhou Kind Architecture Material Technology Co., Ltd.
Address
Unit 10 No 1 Dashadi West Huangpu District
Country
Guangzhou

View All Listings by this Company

Print This Approval


#250788014

Shower kit comprising of a shower hose, handset and a flow regulator. Open outlet use only. Maximum operating temperature 65°C.

Section:
1670 Shower Outlets
Section Subtitle:
Shower kit(s)
WRAS Approval Number:
250788014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP conical nut
Marking:
Shower Hose – Aqualisa Shower handset – Aqualisa
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
ACY1010.ECO

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#250815304

Section:
2011 Shower Valves
Description:
A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall mounted. Two-way diverter valve. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
31/08/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
T43014BSP 3/4" (F)10 bar85 °CCompany logoOn bodyNo
T43084BSP 3/4" (F)10 bar85 °CCompany logoOn bodyNo
T43064BSP 3/4" (F)10 bar85 °CCompany logoOn rear of bodyNo
T43194BSP 3/4" (F)10 bar85 °CCompany logoOn rear of bodyNo
T44014BSP 3/4" (F)10 bar85 °CCompany logoOn bodyNo
T44054BSP 3/4" (F)10 bar85 °CCompany logoOn bodyNo
T44034BSP 3/4" (F)10 bar85 °CCompany logoOn bodyNo
T45004BSP 3/4" (F)10 bar85 °CCompany logoOn bodyNo
T45014BSP 1/2" (F)10 bar85 °CCompany logoOn operating memberNo
Product Images

Approval Holder:
ZHEJIANG XINDONG SANITARY WARE CO., LTD
Company Name
ZHEJIANG XINDONG SANITARY WARE CO., LTD
Address
Xuanmen Industrial Zone Yuhuan Zhejiang
Postcode
317608
Country
China
General Email
310860331@qq.com

View All Listings by this Company
Manufacturers:
Zhejiang Xindong Sanitary Ware Co., Ltd

Print This Approval


#250815301

Section:
2052 Diverter
Description:
A Range of Diverter(s) incorporating manual control
Plastic body/bodies
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/08/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TC2827.98mm10 bar85 °CWANHAI, WRAS, TC28, Production date (DD/MM/YYYY)BodyNo
TC28-127.98mm10 bar85 °CWANHAI, WRAS, TC28-1, Production date (DD/MM/YYYY)BodyNo
Product Images

Approval Holder:
Ningbo Wanhai Cartridge Technology Co. Ltd.
Company Name
Ningbo Wanhai Cartridge Technology Co. Ltd.
Address
Xiachen Development Zone, Chunhu, Fenghua
Country
Zhejiang, China

View All Listings by this Company
Manufacturers:
Ningbo Wanhai Cartridge Technology Co

Print This Approval


#250904701

Non-verifiable double check valve assembly with DZR brass body, incorporating two spring loaded, resilient trim in-line check valve cartridges. Compression connection to be used with copper pipe BS EN1057 only. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C for 12.10102.035.CP5R-8511, Maximum operating temperature 65°C for 12.10112.035.CP5R-8511.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250904701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
35mm compression.
Marking:
V&G, CR, size, flow arrow & WRAS on body, Date of manufacture MM-YY on body. EN1254-2 & size on compression nut
Installation Requirements:
R001
Expiry date:
30/09/2030
Model:
12.10102.035.CP5R-8511 12.10112.035.CP5R-8511

Manufacturer:
Zhejiang Valogin Technology Co. Ltd.
Company Name
Zhejiang Valogin Technology Co. Ltd.
Address
Qinggang Technological Ind. Zone, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#250904706

Versol Electrical Water Heater Tank, with a stainless-steel tank body. Max working pressure 10 bar. Max operating temperature 95°C.

Section:
0090 Calorifiers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½ “ BSP (F).
Marking:
Versol on body. Versol, capacity, pressure and tech info on label.
Installation Requirements:
R001
Expiry date:
30/09/2030
Model:
SO-30 Water Heater Tank– 30 L SO-50 Water Heater Tank – 50 L SO-80 Water Heater Tank - 80 L SO-100 Water Heater Tank - 100 L SO-120 Water Heater Tank - 120 L

Approval Holder:
Versol Ltd Sp Zoo,
Company Name
Versol Ltd Sp Zoo,
Address
Robotnicza 38, 39-100 Ropczyce

View All Listings by this Company

Print This Approval


#250315013

Range of non-rising spindle headworks with brass bodies. For insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
250315013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
TS & WRAS on body.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
55418 83409

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#240702085

Range of quarter turn ceramic disc headworks with brass bodies and EPDM `O` rings for insertion into specifically dimensioned bores. Maximum working pressure; 10 Bar Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240702085
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M)
Marking:
TS & WRAS on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
66307 78949 35235

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#250902033

Range of quarter turn ceramic disc and non-rising spindle headworks with brass bodies and EPDM ‘O’ rings. For insertion into specifically dimensioned tap assemblies Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
250902033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
MVT and date of manufacture (YY-MM) on body
Installation Requirements:
R001
Expiry date:
30/09/2030
Model:
FCN0538 FLG0398

Manufacturer:
M.V.T. Minuterie e Viterie Tornite S.p.A.
Company Name
M.V.T. Minuterie e Viterie Tornite S.p.A.
Address
Via Benaco, 103 Bedizzole (BS)
Postcode
25081
Country
Italy
Phone
+39 030 674105

View All Listings by this Company

Print This Approval


#250814303

Kisdon range of single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The outlet of the pull-out spray incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250814303
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP
Marking:
WIX on tap body
Installation Requirements:
R001 R090
Expiry date:
31/08/2030
Model:
170099 311142 313077 313078 313079 313087
Product Images

Approval Holder:
Wickes PLC
Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company

Print This Approval


#250905301

Section:
0450 Combination Tap Assemblies
Description:
A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006
Expiry date:
30/09/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TVW103006000XXVarious½” BSP (M)10 bar60 °CVilleroy & BochOn the leverYes1/4 Turn ceramic diskPlastic BacknutsAerator
TVW104002000XXVarious½” BSP (M)10 bar60 °CVilleroy & BochOn the leverYes1/4 Turn ceramic diskPlastic BacknutsAerator

Notes & Further Information

XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel) The products were already tested according to the TCS. The report from SKZ is attached.

Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#250314302

Deck Mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator & flow straightener. Capable of achieving AUK3 tap gap. The product is supplied with a click type waste(not verified by test). Maximum working pressure 5 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250314302
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP
Marking:
Ebb & Flo on base of tap body
Installation Requirements:
R001 R008 R010
Expiry date:
31/03/2030
Model:
20761, AA970 & AA971 .
Product Images

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#240988034

Single hole, single outlet, fixed combination tap assemblies (brass body chrome finish), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener and an optional flow regulator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240988034
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The product is supplied with a click type waste – verified by test The product is suppled with an optional flow regulator
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½" captive nut end connections.
Marking:
ebb+flo on body
Installation Requirements:
R001 R006 R010
Expiry date:
1/10/2029
Model:
30167.
Product Images

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#250902010

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating a ceramic disc headwork with various type operating members. The spout outlet incorporates a plastic aerator. Product is supplied with click type pop-up waste – not verified by test. Maximum working pressure 6 Bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250902010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP F
Marking:
Waterworks on spout outlet.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
HKM4ZZX CLS4ZZX HLS4ZZX Suffix Options: Where ZZ represents handle components 0 - Less Handles 1 - Cross Handle 2 - Two‐Tone Cross Handle 3 - Coin Edge Cross Handle 10 - Solo Series Lever Handle 11 - Lever Handle 12 - Two‐Tone Lever Handle 13 - Coin Edge Lever Handle 14 - Walnut Lever Handle 15 - Leather Lever Handle 20 - Solo Series Straight Lever Handle 2A - Tandem Series Guilloche Lines Lever Handle 2B - Tandem Series Two‐Tone Lever Handle 2C - Union Series Guilloche Link Lever Handle 2D - Union Series Enamel Guilloche Lines Lever Handle 2E - Union Series Guilloche Pinstripe Lever Handle 2P - Solo Series Two‐Piece Straight Lever Handle 2S - Bond Rally Series Lever Handle 2T - Teak Lever Handle 30 - Solo Series Knob Handle 3S - Bond Rally Series Knob Handle 4A - Tandem Series Guilloche Lines Knob Handle 4B - Tandem Series Two‐Tone Guilloche Knob Handle 4D - Union Series Enamel Guilloche Lines Knob Handle 5C - Union Series Guilloche Link Knob Handle 7A - Tandem Series Guiloche Lines Lever handles with Gland Cover 7B - Tandem Series Two Tone Lever handles with Gland Cover 7C - Union Series Guiloche Link Lever handles with Gland Cover 7D - Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E - Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P - Solo Series Two Piece Straight Lever handle with Gland Cover 7S - Bond Rally Series Lever Handle With Gland Cover 7T - Tandem Series Teak lever with Gland Cover 8Z - Straight Lever Handle 90 - Solo Series Straight Lever handles with Gland Cover
Where X represents External Colour or Finish Options AC - Antique Copper AB - Architectural Bronze AQB - Antique Brass BZ - Architectural Bronze C - Polished Chrome CO - Concordia DN - Dark Nickel G - Gold L - Lumin M - Matte Nickel MC - Matte Chrome MG - Matte Gold MS - Matte Silver N - Polished Nickel S - Silver SC - Shiny Copper SO - Sovereign UB - Unlacquered Brass

Approval Holder:
Waterworks
Company Name
Waterworks
Address
10 John Street London WC1N2EB

View All Listings by this Company

Print This Approval


#2310417

Range of single hole, single outlet (fixed) combination tap assemblies ( brass bodies - various finishes), incorporating either a ceramic cartridge or ceramic disc (see models) headworks with either a single lever or cross top (see models) operating member. The spout outlet incorporates either a plastic aerator, a plastic flow straightener or an open outlet type spout (see models). Some models are supplied with a click type waste and some are supplied with a lever type pop-up waste (see models). Maximum working pressure 5.0 Bar . Maximum operating temperature 65.0°C or 85.0°C (see models)

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2310417
Size:
Stainless Steel braided EPDM lined flexible hoses incorporating 1/2” BSP captive nut end connections. Stainless steel braided EPDM or (PEX) lined flexible hose assemblies incorporating 1/2" captive nut end connections for models ( 174538, 179638, 179608F, 179608F GF, 179108 & 172908 )
Marking:
ebb+flo on body, except for 285451 Caldew - TP on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2028
Model:
5.0 Bar, 65°C Models: 30794 Pentle Cloakroom Basin Mixer 33830 Kilve Basin Mixer 295451 Caldew Mini Basin Mixer. AA972 Pentle Cloakroom Basin Mixer Matt Black 5.0 Bar, 85°C Models: AA969 Cobo Cloakroom Basin Mixer 95737 Cobo Basin Mixer

Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#250912012

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. The product is supplied with a click type waste, verified by test. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250912012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
LOTA on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2030
Model:
63886-70X, 63887-70X, 63888-70X. X denotes finish and can be replaced with: 01 - Chrome, 04 - Brushed Nickel, 4408 - Brushed Brass, 6801 - Matt Black.
Product Images

Approval Holder:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#250504031

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250504031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
ADORE171, ADORE171M, DORCP and LACE171 models: 15 mm copper tails. All other models: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DTC 32A (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2030
Model:
SW1
Product Images

Approval Holder:
COMMERCIALWARE LTD
Company Name
COMMERCIALWARE LTD
Postcode
HD9 1UE

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2311923

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2311923
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
ebb+flo on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2028
Model:
17294 & 61716
Product Images

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#250902012

Range of single hole, single outlet, swivel, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Model BLS4ZZX is supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250902012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP female adapters.
Marking:
WATERWORKS on escutcheon.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2030
Model:
BKM4ZZX BLS4ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:
Waterworks
Company Name
Waterworks
Address
10 John Street London WC1N2EB

View All Listings by this Company

Print This Approval


#250902035

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc or ceramic cartridge headworks and single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250902035
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hoses incorporating 1/2" BSP (F) captive nut end connections.
Marking:
ST JAMES logo on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2030
Model:
5004 Range (2 Different colour finish) 5004BF 5004CM 5005 Range (5 Different colour finish) 5005B 5005BB 5005BC 5005BF 5005CM 5006 Range (5 Different colour finish) 5006B 5006BB 5006BC 5006BF 5006CM 5007 Range (5 Different colour finish) 5007B 5007BB 5007BC 5007BF 5007CM 580381 Instantor Pro Variants 580077 BF = Brushed Chrome Finish, CM = Chrome Finish, B = Brushed Black Finish, BB = Brushed Brass Finish, BC = Brushed Red Gold Finish.

Approval Holder:
Sanbra Fyffe
Company Name
Sanbra Fyffe
Address
Santry Avenue, Santry, Dublin, D09 K160
Country
Ireland

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 563 of 578

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.