Range of water hammer/shock arrestors with brass and copper bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½”-1” BSPP/BSPT/NPT (M).

Marking:

MAPLEF, model, size & PN on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

MV130-5L

Approval Holder:

Maplef valves and Fittings Ltd

Company Name

Maplef valves and Fittings Ltd

Address

Suite 1488 1130 West Pender St Vancouver, BC

Postcode

V6E 4A4

Country

Canada

General Email

saad@maplefvalves.ca

View All Listings by this Company

Filling valve with a DZR brass body comprising of: Two check valve cartridges on the inlet, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve preset at 1.4 bar, a sprung loaded self-closing valve and a single check valve cartridge on the outlet, verified by test (suitable for backflow protection against Fluid Category 2). There is a drain port below the self-closing valve chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1015 Filling Loop

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm x 15mm compression.

Marking:

JEPP, CR, DN, PN, Arrow

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

JPSJV001

Approval Holder:

HUB Distribution Ltd

Company Name

HUB Distribution Ltd

Address

37 St. Audrey Avenue Bexleyheath Kent

Postcode

DA7 5DA

Country

United Kingdom

View All Listings by this Company

Range of press fittings (brass bodies) “KMU” with stainless steel press (‘U’ profile) collars and EPDM O-rings for use with “KELOX” range of PERT/AL/PERT multilayer pipe (‘butt welded’ variant 16mm-63mm & ‘lap welded’ variant 16mm-20mm). Maximum working pressure: 10 bar. Maximum operating temperature: 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260106001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm, 20mm, 25mm, 32mm, 40 mm, 50 mm and 63 mm.

Marking:

KE KELIT, on crimp sleeve. KELOX; size (outer diameter x wall thickness); line and batch no. and product information on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

“KELOX” PE-RT type II/AL/PE-RT type II multilayer pipes: 7521160 KM100 KELOX multilayer pipe 16x2 7521200 KM100 KELOX multilayer pipe 20x2,25 7411250 KM100 KELOX multilayer pipe 25x2,5 7411320 KM100 KELOX multilayer pipe 32x3 7410160 KM110 KELOX multilayer pipe 16x2 /5m 7527200 KM110 KELOX multilayer pipe 20x2,25 /5m 7410250 KM110 KELOX multilayer pipe 25x2,5 /5m 7410320 KM110 KELOX multilayer pipe 32x3 /5m 7410400 KM110 KELOX multilayer pipe 40x4 /5m 7410500 KM110 KELOX multilayer pipe 50x4,5 /5m 7410630 KM110 KELOX multilayer pipe 63x6 /5m 74101601 KM111 KELOX multilayer pipe nipple 16x2 75272001 KM111 KELOX multilayer pipe nipple 20x2,25 74102501 KM111 KELOX multilayer pipe nipple 25x2,5 74103201 KM111 KELOX multilayer pipe nipple 32x3 7521161 KM130 KELOX plus pipe - 9mm 16x2 7521201 KM130 KELOX plus pipe - 9mm 20x2,25 7521251 KM130 KELOX plus pipe - 9mm 25x2,5 7521321 KM130 KELOX plus pipe - 9mm 32x3 75211613 KM133 KELOX plus pipe - 13mm 16x2 75212013 KM133 KELOX plus pipe - 13mm 20x2,25 75212513 KM133 KELOX plus pipe - 13mm 25x2,5 75213213 KM133 KELOX plus pipe - 13mm 32x3 7521164 KM134 KELOX plus pipe - 4mm 16x2 7521204 KM134 KELOX plus pipe - 4mm 20x2,25 7521254 KM134 KELOX plus pipe - 4mm 25x2,5 7521324 KM134 KELOX plus pipe - 4mm 32x3 Model/Code /Number Product Name Description Connection size 75211618 KM138 KELOX Lambda Plus pipe 20 16x2 75212018 KM138 KELOX Lambda Plus pipe 20 20x2,25 75212518 KM138 KELOX Lambda Plus pipe 20 25x2,5 75213218 KM138 KELOX Lambda Plus pipe 20 32x3 1005160 KM140 KELOX pro pipe 16x2/25 1005161 KM140 KELOX pro pipe 16x2/25 1005200 KM140 KELOX pro pipe 20x2,25/28 1005201 KM140 KELOX pro pipe 20x2,25/28 71100BB0 KMU410 Coupling 16/16 71100DB0 KMU410 Coupling 20/16 71100DD0 KMU410 Coupling 20/20 71100EB0 KMU410 Coupling 25/16 71100ED0 KMU410 Coupling 25/20 71100EE0 KMU410 Coupling 25/25 71100FD0 KMU410 Coupling 32/20 71100FE0 KMU410 Coupling 32/25 71100FF0 KMU410 Coupling 32/32 71100GE0 KMU410 Coupling 40/25 71100GF0 KMU410 Coupling 40/32 71100GG0 KMU410 Coupling 40/40 71100HF0 KMU410 Coupling 50/32 71100HG0 KMU410 Coupling 50/40 71100HH0 KMU410 Coupling 50/50 71100IG0 KMU410 Coupling 63/40 71100IH0 KMU410 Coupling 63/50 71100II0 KMU410 Coupling 63/63 Model/Code /Number Product Name Description Connection size 71103BB0 KMU420 Elbow 90° 16 71103DD0 KMU420 Elbow 90° 20 71103EE0 KMU420 Elbow 90° 25 71103FF0 KMU420 Elbow 90° 32 71103GG0 KMU420 Elbow 90° 40 71103HH0 KMU420 Elbow 90° 50 71103II0 KMU420 Elbow 90° 63 71104BB0 KMU420Z Zeta elbow 90° 16 71104DD0 KMU420Z Zeta elbow 90° 20 71104EE0 KMU420Z Zeta elbow 90° 25 71106FF0 KMU425 Elbow 45° 32 71106GG0 KMU425 Elbow 45° 40 71106HH0 KMU425 Elbow 45° 50 71106II0 KMU425 Elbow 45° 63 Model/Code /Number Product Name Description Connection size 71110BBB KMU440 Tee 16/16/16 71110BDB KMU440 Tee 16/20/16 71110DBB KMU440 Tee 20/16/16 71110DBD KMU440 Tee 20/16/20 71110DDB KMU440 Tee 20/20/16 71110DDD KMU440 Tee 20/20/20 71110DED KMU440 Tee 20/25/20 71110EBB KMU440 Tee 25/16/16 71110EBD KMU440 Tee 25/16/20 71110EBE KMU440 Tee 25/16/25 71110EDD KMU440 Tee 25/20/20 71110EDE KMU440 Tee 25/20/25 71110EEE KMU440 Tee 25/25/25 71110FBF KMU440 Tee 32/16/32 71110FDF KMU440 Tee 32/20/32 71110FEE KMU440 Tee 32/25/25 71110FEF KMU440 Tee 32/25/32 71110FFF KMU440 Tee 32/32/32 71110GDG KMU440 Tee 40/20/40 71110GEG KMU440 Tee 40/25/40 71110GFF KMU440 Tee 40/32/32 71110GFG KMU440 Tee 40/32/40 71110GGG KMU440 Tee 40/40/40 71110HEH KMU440 Tee 50/25/50 71110HFH KMU440 Tee 50/32/50 71110HGH KMU440 Tee 50/40/50 71110HHH KMU440 Tee 50/50/50 71110IEI KMU440 Tee 63/25/63 71110IFI KMU440 Tee 63/32/63 71110IGI KMU440 Tee 63/40/63 71110IHI KMU440 Tee 63/50/63 71110III KMU440 Tee 63/63/63 Model/Code /Number Product Name Description Connection size 71111BBB KMU440Z Zeta tee 16/16/16 71111DDD KMU440Z Zeta tee 20/20/20 71111EEE KMU440Z Zeta tee 25/25/25 71240B02 KMU447 Adaptor tee female 16x1/2" 71240D02 KMU447 Adaptor tee female 20x1/2" 71240D04 KMU447 Adaptor tee female 20x3/4" 71240E02 KMU447 Adaptor tee female 25x1/2" 71240E04 KMU447 Adaptor tee female 25x3/4" 71240F02 KMU447 Adaptor tee female 32x1/2" 71240F04 KMU447 Adaptor tee female 32x3/4" 71240G04 KMU447 Adaptor tee female 40x3/4" 71240G05 KMU447 Adaptor tee female 40x1" 71240H05 KMU447 Adaptor tee female 50x1" 71240I05 KMU447 Adaptor tee female 63x1" 71202B01 KMU450 Adaptor male 16x3/8" 71202B02 KMU450 Adaptor male 16x1/2" 71202B04 KMU450 Adaptor male 16x3/4" 71202D02 KMU450 Adaptor male 20x1/2" 71202D04 KMU450 Adaptor male 20x3/4" 71202D05 KMU450 Adaptor male 20x1" 71202E04 KMU450 Adaptor male 25x3/4" 71202E05 KMU450 Adaptor male 25x1" 71202F04 KMU450 Adaptor male 32x3/4" 71202F05 KMU450 Adaptor male 32x1" 71202F06 KMU450 Adaptor male 32x5/4" 71202G06 KMU450 Adaptor male 40x5/4" 71202G07 KMU450 Adaptor male 40x6/4" 71202H07 KMU450 Adaptor male 50x6/4" 71202H09 KMU450 Adaptor male 50x2" 71202I09 KMU450 Adaptor male 63x2" Model/Code /Number Product Name Description Connection size 71206B02 KMU457 Adaptor female 16x1/2" 71206B04 KMU457 Adaptor female 16x3/4" 71206D02 KMU457 Adaptor female 20x1/2" 71206D04 KMU457 Adaptor female 20x3/4" 71206D05 KMU457 Adaptor female 20x1" 71206E04 KMU457 Adaptor female 25x3/4" 71206E05 KMU457 Adaptor female 25x1" 71206F04 KMU457 Adaptor female 32x3/4" 71206F05 KMU457 Adaptor female 32x1" 71206F06 KMU457 Adaptor female 32x5/4" 71206G06 KMU457 Adaptor female 40x5/4" 71206G07 KMU457 Adaptor female 40x6/4" 71206H07 KMU457 Adaptor female 50x6/4" 71206I09 KMU457 Adaptor female 63x2" 71212B01 KMU460 Elbow adaptor 90° male 16x3/8" 71212B02 KMU460 Elbow adaptor 90° male 16x1/2" 71212D02 KMU460 Elbow adaptor 90° male 20x1/2" 71212D04 KMU460 Elbow adaptor 90° male 20x3/4" 71212E04 KMU460 Elbow adaptor 90° male 25x3/4" 71212E05 KMU460 Elbow adaptor 90° male 25x1" 71212F05 KMU460 Elbow adaptor 90° male 32x1" 71216B02 KMU467 Elbow adaptor 90° female 16x1/2" 71216D02 KMU467 Elbow adaptor 90° female 20x1/2" 71216D04 KMU467 Elbow adaptor 90° female 20x3/4" 71216E04 KMU467 Elbow adaptor 90° female 25x3/4" 71216E05 KMU467 Elbow adaptor 90° female 25x1" 71216F05 KMU467 Elbow adaptor 90° female 32x1" Model/Code /Number Product Name Description Connection size 71120B00 KMU471 End cap 16 71120D00 KMU471 End cap 20 71120E00 KMU471 End cap 25 71120F00 KMU471 End cap 32 71252B2B KMU475 Wall bracket female 16x1/2" 71252D2D KMU475 Wall bracket female 20x1/2" 71254B2B KMU477 U-Wall bracket female 16x1/2" 71254D2D KMU477 U-Wall bracket female 20x1/2" 71254E2E KMU477 U-Wall bracket female 25x1/2" 71250B02 KMU480 Wall bracket 90° female 16x1/2" 71250D02 KMU480 Wall bracket 90° female 20x1/2" 71250D04 KMU480 Wall bracket 90° female 20x3/4" 71250E04 KMU480 Wall bracket 90° female 25x3/4" 71251B02 KMU480L Wall bracket 90° female 20mm 16x1/2" 71251D02 KMU480L Wall bracket 90° female 20mm 20x1/2" 71255B02 KMU480K Wall bracket 90° female short 16x1/2" 71255D02 KMU480K Wall bracket 90° female short 20x1/2" 71252B02 KMU480Z Zeta wall bracket 90° female 16x1/2" 71252D02 KMU480Z Zeta wall bracket 90° female 20x1/2"

Approval Holder:

KE KELIT

Company Name

KE KELIT

Address

Kunstsoffwerk Gesellschaft m.b.h

View All Listings by this Company

Uponor S-Press composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260188007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Uponor MLC Pipe (40 – 110mm) Uponor S-Press composite PPSU fittings (40 – 75mm) Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples 20, 25, 32mm Uponor RS Fittings (63 – 110mm) Uponor S-Press Metal Press fittings (40 -75mm)

Marking:

Uponor or U on fitting. Uponor MLCP and product info on pipe

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

1013446 pipe Uponor MLC white S 40x4,0 5m 1013449 pipe Uponor MLC white S 50x4,5 5m 1013451 pipe Uponor MLC white S 63x6,0 5m 1013453 pipe Uponor MLC white S 75x7,5 5m 1013455 pipe Uponor MLC white S 90x8,5 5m 1013457 pipe Uponor MLC white S 110x10,0 5m 1029125 RS Metall Uponor RS adapter S-Press 63-RS2 1029126 RS Metall Uponor RS adapter S-Press 75-RS2 1029127 RS Metall Uponor RS adapter S-Press 90-RS3 1029128 RS Metall Uponor RS adapter S-Press 110-RS3 1029129 RS Metall Uponor RS flange adapter RS3-DN80 (PN16) 1029130 RS Metall Uponor RS flange adapter RS3-DN100 (PN16) 1029131 RS Metall Uponor RS adapter male thread R2"MT-RS2 1029132 RS Metall Uponor RS adapter male thread R2 1/2"MT-RS2 1029133 RS Metall Uponor RS adapter male thread R3"MT-RS3 1029134 RS Metall Uponor RS adapter female thread Rp1"FT-RS2 1029135 RS Metall Uponor RS adapter female thread Rp2"FT-RS2 1029136 RS Metall Uponor RS adapter female thread Rp2 1/2"FT-RS2 1029137 RS Metall Uponor RS adapter female thread Rp3"FT-RS3 1029138 RS Metall Uponor RS elbow RS2-RS2 1029139 RS Metall Uponor RS elbow RS3-RS3 1029140 RS Metall Uponor RS elbow 45deg RS2-RS2 1029141 RS Metall Uponor RS elbow 45deg RS3-RS3 1029142 RS Metall Uponor RS tee RS2-RS2-RS2 1029143 RS Metall Uponor RS tee RS3-RS3-RS3 1029144 RS Metall Uponor RS coupling RS2-RS2 1029145 RS Metall Uponor RS coupling RS3-RS3 1029146 RS Metall Uponor RS reducer RS3-RS2 1032895 S-Press Metall Uponor S-Press adapter male thread 63-R2"MT 1032896 S-Press Metall Uponor S-Press adapter male thread 75-R2 1/2"MT 1046477 RS Metall Uponor RS spacer RS2-RS2 l=130mm 1046478 RS Metall Uponor RS spacer RS3-RS3 l=210mm 1046750 RS Metall Uponor RS spacer RS2-RS2 l=5mm 1046751 RS Metall Uponor RS spacer RS3-RS3 l=5mm 1046901 S-Press Metall Uponor S-Press adapter male thread 40-R1 1/4"MT 1046902 S-Press Metall Uponor S-Press adapter male thread 40-R1 1/2"MT 1046903 S-Press Metall Uponor S-Press adapter female thread 40-Rp1 1/4"FT 1046904 S-Press Metall Uponor S-Press adapter female thread 40-Rp1 1/2"FT 1046905 S-Press Metall Uponor S-Press adapter male thread 50-R1 1/2"MT 1046906 S-Press Metall Uponor S-Press adapter male thread 50-R2"MT 1046907 S-Press Metall Uponor S-Press adapter female thread 50-Rp1 1/2"FT 1046908 S-Press Metall Uponor S-Press elbow 40-40 1046909 S-Press Metall Uponor S-Press elbow male thread 40-R1 1/4"MT 1046910 S-Press Metall Uponor S-Press elbow female thread 40-Rp1 1/2"FT 1046911 S-Press Metall Uponor S-Press elbow 50-50 1046912 S-Press Metall Uponor S-Press elbow female thread 50-Rp1 1/2"FT 1046913 S-Press Metall Uponor S-Press elbow 45deg 40-40 1046914 S-Press Metall Uponor S-Press elbow 45deg 50-50 1046921 S-Press Metall Uponor S-Press tee 40-40-40 1046922 S-Press Metall Uponor S-Press tee female thread 40-Rp1/2"FT-40 1046923 S-Press Metall Uponor S-Press tee female thread 40-Rp3/4"FT-40 1046928 S-Press Metall Uponor S-Press tee 50-50-50 1046929 S-Press Metall Uponor S-Press tee female thread 50-Rp1"FT-50 1046932 S-Press Metall Uponor S-Press coupling 40-40 1046934 S-Press Metall Uponor S-Press reducer 50-40 1046935 S-Press Metall Uponor S-Press coupling 50-50 1046937 S-Press Metall Uponor S-Press adapter swivel nut 40-G1 1/2"SN 1046939 S-Press Metall Uponor S-Press adapter swivel nut 50-G2"SN 1046940 RS Metall Uponor RS adapter S-Press 40-RS2 1046941 RS Metall Uponor RS adapter S-Press 50-RS2 1059397 RS Metall Uponor RS adapter S-Press 16-RS2 1059399 RS Metall Uponor RS flange adapter RS2-DN65 (PN16) 1059403 RS Metall Uponor RS adapter female thread Rp1/2"FT-RS2 1059404 RS Metall Uponor RS adapter female thread Rp1/2"FT-RS3 1060094 S-Press Metall Uponor S-Press adapter swivel nut 40-G1 1/4"SN 1060095 S-Press Metall Uponor S-Press adapter swivel nut 50-G1 1/2"SN 1095818 RS Metall Uponor RS adapter S-Press PLUS 20-RS2 1095819 RS Metall Uponor RS adapter S-Press PLUS 25-RS2 1095820 RS Metall Uponor RS adapter S-Press PLUS 32-RS2 1032877 S-Press PPSU Uponor S-Press elbow PPSU 63-63 1032878 S-Press PPSU Uponor S-Press elbow PPSU 75-75 1032879 S-Press PPSU Uponor S-Press elbow 45deg PPSU 63-63 1032880 S-Press PPSU Uponor S-Press elbow 45deg PPSU 75-75 1032881 S-Press PPSU Uponor S-Press coupling PPSU 63-63 1032882 S-Press PPSU Uponor S-Press coupling PPSU 75-75 1032883 S-Press PPSU Uponor S-Press reducer PPSU 63-40 1032884 S-Press PPSU Uponor S-Press reducer PPSU 63-50 1032885 S-Press PPSU Uponor S-Press reducer PPSU 75-50 1032886 S-Press PPSU Uponor S-Press reducer PPSU 75-63 1032887 S-Press PPSU Uponor S-Press tee PPSU 63-63-63 1032888 S-Press PPSU Uponor S-Press tee PPSU 75-75-75 1032889 S-Press PPSU Uponor S-Press tee reducer PPSU 63-25-63 1032890 S-Press PPSU Uponor S-Press tee reducer PPSU 63-32-63 1032891 S-Press PPSU Uponor S-Press tee reducer PPSU 63-40-63 1032892 S-Press PPSU Uponor S-Press tee reducer PPSU 75-32-75 1032893 S-Press PPSU Uponor S-Press tee reducer PPSU 75-40-75 1032894 S-Press PPSU Uponor S-Press tee reducer PPSU 75-50-75 1039941 S-Press PPSU Uponor S-Press reducer PPSU 40-25 1039942 S-Press PPSU Uponor S-Press reducer PPSU 40-32 1039943 S-Press PPSU Uponor S-Press reducer PPSU 50-32 1039962 S-Press PPSU Uponor S-Press tee reducer PPSU 40-20-40 1039963 S-Press PPSU Uponor S-Press tee reducer PPSU 40-25-32 1039964 S-Press PPSU Uponor S-Press tee reducer PPSU 40-25-40 1039965 S-Press PPSU Uponor S-Press tee reducer PPSU 40-32-32 1039966 S-Press PPSU Uponor S-Press tee reducer PPSU 40-32-40 1039967 S-Press PPSU Uponor S-Press tee reducer PPSU 50-25-40 1039968 S-Press PPSU Uponor S-Press tee reducer PPSU 50-25-50 1039969 S-Press PPSU Uponor S-Press tee reducer PPSU 50-32-50 1046386 S-Press PPSU Uponor S-Press elbow PPSU 40-40 1046387 S-Press PPSU Uponor S-Press elbow PPSU 50-50 1046388 S-Press PPSU Uponor S-Press elbow 45deg PPSU 40-40 1046389 S-Press PPSU Uponor S-Press elbow 45deg PPSU 50-50 1046390 S-Press PPSU Uponor S-Press tee PPSU 40-40-40 1046391 S-Press PPSU Uponor S-Press tee PPSU 50-50-50 1046400 S-Press PPSU Uponor S-Press tee reducer PPSU 50-40-50 1046401 S-Press PPSU Uponor S-Press coupling PPSU 40-40 1046402 S-Press PPSU Uponor S-Press coupling PPSU 50-50 1046406 S-Press PPSU Uponor S-Press reducer PPSU 50-40

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of brass or copper capillary solder ring fittings for use with copper pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2212381

Size:

see model

Marking:

Flowflex logo, EN1254 & Size.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

677888 Copper Capillary Solder Ring Equal Tee 15mm. 678012 Copper Capillary Solder Ring Equal Tee 22mm. 677919 Copper Capillary Solder Ring Equal Tee 28mm. 677925 Copper Capillary Solder Ring Equal Tee 35mm. 677896 Copper Capillary Solder Ring Reduced Branch Tee 22 x 22 x 15mm. 677921 Copper Capillary Solder Ring Reduced End Tee 22 x 15 x 22mm. 677992Copper Capillary Solder Ring Reduced Branch Tee 28 x 28 x 15mm. 677924 Copper Capillary Solder Ring Reduced Branch Tee 28 x 28 x 22mm. 677920 Copper Capillary Solder Ring Reduced Branch Tee 35 x 35 x 28mm. 678028Copper Capillary Solder Ring Reduced Branch and End Tee 22 x 15 x 15mm. 677989 Copper Capillary Solder Ring Equal Elbow 8mm. 677990 Copper Capillary Solder Ring Equal Elbow 10mm. 677912 Copper Capillary Solder Ring Equal Elbow 15mm. 677914 Copper Capillary Solder Ring Equal Elbow 22mm. 677916 Copper Capillary Solder Ring Equal Elbow 28mm. 677991 Copper Capillary Solder Ring Equal Elbow 35mm. 678003 Copper Capillary Solder Ring Street Elbow 15mm. 677889 Copper Capillary Solder Ring Street Elbow 22mm. 677999 Copper Capillary Solder Ring Street Elbow 28mm. 677993Copper Capillary Solder Ring 45 Deg Elbow 15mm. 678026 Copper Capillary Solder Ring 45 Deg Elbow 22mm. 678031 Copper Capillary Solder Ring 45 Deg Elbow 28mm. 678040 Copper Capillary Solder Ring 45 Deg Elbow 35mm. 677891 Copper Capillary Solder Ring Straight Coupling 8mm. 677892 Copper Capillary Solder Ring Straight Coupling 10mm. 677994 Copper Capillary Solder Ring Straight Coupling 15mm. 677997 Copper Capillary Solder Ring Straight Coupling 22mm. 677995 Copper Capillary Solder Ring Straight Coupling 28mm. 677913 Copper Capillary Solder Ring Straight Coupling 35mm. 677893 Copper Capillary Solder Ring Reducing Coupling 15 x 10mm. 678009 Copper Capillary Solder Ring Reducing Coupling 22 x 15mm. 677897 Copper Capillary Solder Ring Reducing Coupling 28 x 15mm. 678007 Copper Capillary Solder Ring Reducing Coupling 28 x 22mm. 677928 Copper Capillary Solder Ring Fitting Reducer 28 x 22mm. 677895 Copper Capillary Solder Ring Metric Imperial Coupling 22mm x 3/4". 677899 Copper Capillary Solder Ring Fitting Reducer 15 x 8mm. 677900 Copper Capillary Solder Ring Fitting Reducer 15 x 10mm. 677927 Copper Capillary Solder Ring Fitting Reducer 22 x 15mm. 677901 Copper Capillary Solder Ring Fitting Reducer 28 x 15mm. 677903 Copper Capillary Solder Ring Fitting Reducer 35 x 22mm. 677929 Copper Capillary Solder Ring Fitting Reducer 35 x 28mm. 677930 Copper Capillary Solder Ring Stop End 15mm. 677982 Copper Capillary Solder Ring Stop End 22mm. 677985 Copper Capillary Solder Ring Stop End 28mm. 677984 Copper Capillary Solder Ring Bent Tap Connector 15mm x 1/2". 677906 Copper Capillary Solder Ring Bent Tap Connector 22mm x 3/4". 677904 Copper Capillary Solder Ring Straight Tap Connector 15mm x 1/2". 677894 Copper Capillary Solder Ring Straight Tap Connector 15mm x 3/4". 677905 Copper Capillary Solder Ring Straight Tap Connector 22mm x 3/4". 677902 Copper Capillary Solder Ring Wallplate Elbow 15mm x 1/2". 677908 Copper Capillary Solder Ring Male Taper Adaptor 15mm x 1/2". 677907 Copper Capillary Solder Ring Male Taper Adaptor 22mm x 3/4". 677898 Copper Capillary Solder Ring Female Adaptor 15mm x 1/2". 677090 Copper Capillary Solder Ring Female Adaptor 22mm x 3/4".

Approval Holder:

City Plumbing Supplies Holdings Ltd.

Company Name

City Plumbing Supplies Holdings Ltd.

Address

Highbourne House, Eldon Way, Crick

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

View All Listings by this Company

Range of ultrasonic water meters with brass and plastic bodies. The inlets incorporate plastic strainers. Maximum working pressure 16.0 bar. Maximum operating temperature 50⁰C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15 – ½” BSP (M), DN20 – ¾” BSP (M), DN25 – 1” BSP (M), DN32 – 1 ¼” BSP (M), DN40 – 1 ½” BSP (M), DN50 – 2” BSP (M).

Marking:

Flow arrow on plastic body and brass inlet outlet tube, manufacturers logo, barcode, size and technical data laser etched on plastic cover

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

IWU 200 (Iskrasonic®2000)

Approval Holder:

ISKRAEMECO ENERGY MANGEMENT

Company Name

ISKRAEMECO ENERGY MANGEMENT

Address

Plot #1-Pyramids Industrial West Park 10th of Ramadan City

Country

Egypt

View All Listings by this Company

Manufacturer:

ISKRAEMECO ENERGY MANGEMENT

Company Name

ISKRAEMECO ENERGY MANGEMENT

Address

Plot #1-Pyramids Industrial West Park 10th of Ramadan City

Country

Egypt

View All Listings by this Company

Range of electromagnetic water meters with stainless steel bodies, dark grey ebonite rubber inner liner and stainless-steel (SUS316L) electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 40°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN25 - DN1000 flanged.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

AIGNER(AIGNER/A, AIGNER/D,AIGNER/X)

Approval Holder:

MULLER & AIGNER INSTRUMENTS INC.

Company Name

MULLER & AIGNER INSTRUMENTS INC.

Address

6622 NELSON AVENUE, BURNABY BC

Postcode

V5H 0G9

Country

Canada

General Email

anh.nguyen@muller-aigner.com

View All Listings by this Company

Range of inline water meters with brass bodies Maximum working pressure 16.0 Bar. Cold water Only.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20, DN25, DN30 & DN40

Marking:

George Kent & logo, model code, size, manufacture date George Kent Logo on Lid, Serial number above Counter all other markings cast or engraved on the chamber housing.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

GKMV30 & PSM

Approval Holder:

George Kent (Malaysia) Berhad

Company Name

George Kent (Malaysia) Berhad

Address

George Kent Technology Centre 1115 Jalan Puchong Taman Meranti Jaya 47120 Puchong Selangor

Country

Malaysia

View All Listings by this Company

Range of flanged ball type non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron balls, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

260115704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This device does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.

Size:

DN80-DN500 flanged.

Marking:

KSB logo, KSB, model, DN, PN, material and production date (MM/YYYY) on data plate on body. DN, PN, KSB and flow arrow on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

ECOLINE RPL.

Approval Holder:

KSB Valves (Changzhou) Co., Ltd.

Company Name

KSB Valves (Changzhou) Co., Ltd.

Address

Environment Protection Industrial Park, Xinbei District, 68 Huanbao Four Road, 213022 Changzhou, Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

KSB Valves (Changzhou) Co., Ltd.

Company Name

KSB Valves (Changzhou) Co., Ltd.

Address

No.68 Huanbao Four Road, Xinbei District, Changzhou, Jiangsu Province

Country

China

View All Listings by this Company

Range of electromagnetic flow meters with an epoxy coated (grey) carbon steel bodies, EPDM inner liner and stainless-steel electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged inlet/outlet: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300

Marking:

Huiran logo, name and procut info on label.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

D-MAG EF-MAG

Approval Holder:

Nanjing Huiran Measurement & Control Technology Co., Ltd.

Company Name

Nanjing Huiran Measurement & Control Technology Co., Ltd.

Address

Room 102, Building B, Block 5, Zone B, Xinlian Zhigu, 19 Kesheng Road, Jiangbei New District Nanjing, Jiangsu Province

Country

China

General Email

kelin.yang@njhuiran.com

View All Listings by this Company

Manufacturer:

Nanjing Huiran Measurement & Control Technology Co., Ltd.

Company Name

Nanjing Huiran Measurement & Control Technology Co., Ltd.

Address

Room 102, Building B, Block 5, Zone B, Xinlian Zhigu, 19 Kesheng Road, Jiangbei New District Nanjing, Jiangsu Province

Country

China

General Email

kelin.yang@njhuiran.com

View All Listings by this Company

Air break to drain, incorporating a grey, epoxy coated brass body. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251102702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only

Size:

½” BSP (F) inlet x 15mm spigot outlet.

Marking:

Arboles logo and AB on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

900100-W

Approval Holder:

Arboles UK Ltd.

Company Name

Arboles UK Ltd.

Address

Unit 56, Evans Business Centre, Manchester Road

Postcode

BL3 2NZ

Country

Bolton

Phone

+44 (0) 1204 388 814

General Email

rob.biggins@arboles.co.uk

View All Listings by this Company

Range of flow-compensated (thermostatic) temperature controllers incorporating a brass body with EPDM ‘O’-rings and gaskets. The valves incorporate a non-rising spindle headwork for temperature regulation. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Size:

¾" BSP captive nut inlets x ¾” BSP (M) outlets

Marking:

Termix & PN cast on body, laser engraved Termix TPV, sales number and date of manufacture WWYY & QR code on side.

Installation Requirements:

R001

Expiry date:

31/03/2029

Model:

Termix TPV 2.0

Approval Holder:

Gemina Termix A/S

Company Name

Gemina Termix A/S

Address

Navervej 15 - 17 7251 Sunds

Country

Denmark

Phone

0045 9714 1444

General Email

mail@termix,dk

View All Listings by this Company

Circulation pumps with either bronze or stainless pump bodies and a plastic impeller. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260104703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Ebara logo, model no., serial no. and technical information on data plate. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

EHW-B 25-4-130: 1” BSP (F), EHW-B 25-4-180: 1” BSP (F), EHW-B 25-5-130: 1” BSP (F), EHW-B 25-5-180: 1” BSP (F), EHW-B 25-6-130: 1” BSP (F), EHW-B 25-6-180: 1” BSP (F), EHW-B 25-7-180: 1” BSP (F), EHW-B 25-8-180: 1” BSP (F), EHW-B 25-12-180: 1” BSP (F), EHW-S 20-6-130: ¾” BSP (M), EHW-S 25-6-180: 1” BSP (F), EHW-S 25-7-180: 1” BSP (F), EHW-S 25-8-180: 1” BSP (F), EHW-S 32-8-180: 1¼” BSP (F). Where: B = Bronze body. S = Stainless steel body. 20/25/32 = DN size (mm). 4/5/6/7/8/12 = head (m). 130/180 = Pump body size (length from body inlet to outlet) (mm).

Approval Holder:

Ebara Corporation

Company Name

Ebara Corporation

Address

11-1 Haneda Asahi-cho Ota-ku, Tokyo 144-8510

Country

Japan

View All Listings by this Company

Range of rotary vane pumps with either brass, stainless-steel or plastic bodies, stainless steel impellor and EPDM ‘O’ rings. Maximum working pressure 20 Bar. Cold water use.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260202701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Fluid-o-tech, Fluid-o-tech logo, model on label on body, Fluid-o-tech logo, flow arrow on body.

Installation Requirements:

R001

Expiry date:

28/02/2031

Model:

20 SERIES - BRASS VERSION TW030, TW031, TW034, TW034Z, TW050, TW051, TW054, TW054Z, TW070, TW071, TW074, TW074Z, TW100, TW101, TW104, TW104Z, TW150, TW151, TW154, TW154Z, TW180, TW181, TW184, TW184Z, TW200, TW201, TW204, TW204Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 20 SERIES - PLASTIC VERSION TWEP031, TWEP034, TWEP051, TWEP054, TWEP071, TWEP074, TWEP101, TWEP104, TWEP151, TWEP154, TWEP181, TWEP184, TWEP201, TWEP204, TWEP231, TWEP234 QUICK CONNECTION Ø14.5 MM 20 SERIES – INOX VERSION TW0310, TW0311, TW0314, TW0314Z, TW0510, TW0511, TW0514, TW0514Z, TW0710, TW0711, TW0714, TW0714Z, TW110, TW111, TW114, TW114Z, TW1510, TW1511, TW1514, TW1514Z, TW1810, TW1811, TW1814, TW1814Z, TW210, TW211, TW214, TW214Z, TW2310, TW2311, TW2314, TW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 22 SERIES - BRASS VERSION PW070, PW070X, PW070F, PW070FX, PW071, PW071X, PW071F, PW071FX, PW074, PW074X, PW074F, PW074FX, PW074Z, PW074XZ, PW074FZ, PW074FXZ, PW100, PW100F, PW100X, PW100FX, PW101, PW101X, PW101F, PW101FX, PW104, PW104Z, PW104X, PW104XZ, PW104F, PW104FZ, PW104FX, PW104FXZ, PW150, PW150X, PW150F, PW150FX, PW151, PW151X, PW151F, PW151FX, PW154, PW154Z, PW154X, PW154XZ, PW154F, PW154FZ, PW154FX, PW154FXZ, PW200, PW200X, PW200F, PW201, PW201X, PW201F, PW201FX, PW204, PW204Z, PW204X, PW204XZ, PW204F, PW204FZ, PW204FX, PW204FXZ, PW250, PW250F, PW250X, PW254X, PW254XZ, PW254F, PW254FZ, PW254FX, PW254FXZ, PW300, PW300X, PW300F, PW300FX, PW301, PW301X, PW301F, PW301FX, PW304, PW304Z, PW304X, PW304XZ, PW304F, PW304FZ, PW304FX, PW304FXZ, PW350, PW350F, PW350X, PW350FX, PW351, PW351X, PW351F, PW351FX, PW354, PW354Z, PW354X, PW354XZ, PW354F, PW354FZ, PW354FX, PW354FXZ, PW400, PW400F, PW400X, PW400FX, PW401, PW401X, PW401F, PW401FX, PW404, PW404Z, PW404X, PW404XZ, PW404F, PW404FZ, PW404FX, PW404FXZ, RW070, RW070X, RW070F, RW070FX, RW071, RW071X, RW071F, RW071FX, RW074, RW074X, RW074F, RW074FX, RW074Z, RW074XZ, RW074FZ, RW074FXZ, RW100, RW100F, RW100X, RW100FX, RW101, RW101X, RW101F, RW101FX, RW104, RW104Z, RW104X, RW104XZ, RW104F, RW104FZ, RW104FX, RW104FXZ, RW150, RW150X, RW150F, RW150FX, RW151, RW151X, RW151F, RW151FX, RW154, RW154Z, RW154X, RW154XZ, RW154F, RW154FZ, RW154FX, RW154FXZ, RW200, RW200X, RW200F, RW201, RW201X, RW201F, RW201FX, RW204, RW204Z, RW204X, RW204XZ, RW204F, RW204FZ, RW204FX, RW204FXZ, RW250, RW250F, RW250X, RW250FX, RW251, RW251X, RW251F, RW251FX, RW254, RW254Z, RW254X, RW254XZ, RW254F, RW254FZ, RW254FX, RW254FXZ, RW300, RW300X, RW300F, RW300FX, RW301, RW301X, RW301F, RW301FX, RW304, RW304Z, RW304X, RW304XZ, RW304F, RW304FZ, RW304FX, RW304FXZ, RW350, RW350F, RW350X, RW350FX, RW351, RW351X, RW351F, RW351FX, RW354, RW354Z, RW354X, RW354XZ, RW354F, RW354FZ, RW354FX, RW354FXZ, RW400, RW400F, RW400X, RW400FX, RW401, RW401X, RW401F, RW401FX, RW404, RW404Z, RW404X, RW404XZ, RW404F, RW404FZ, RW404FX, RW404FXZPW250FX, PW251, PW251X, PW251F, PW251FX, PW254, PW254Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 22 SERIES – INOX VERSION PW0710, PW0710X, PW0710F, PW0710FX, PW0711, PW0711X, PW0711F, PW711FX, PW0714, PW0714Z, PW0714X, PW0714XZ, PW0714F, PW0714FZ, PW0714FX, PW0714FXZ, PW110, PW110X, PW110F, PW110FX, PW111, PW111X, PW111F, PW111FX, PW114, PW114Z, PW114X, PW114XZ, PW114F, PW114FZ, PW114FX, PW114FXZ, PW1510, PW1510X, PW1510F, PW1510FX, PW1511, PW1511X, PW1511F, PW1511FX, PW1514, PW1514Z, PW1514X, PW1514XZ, PW1514F, PW1514FZ, PW1514FX, PW1514FXZ, PW210, PW210X, PW210F, PW210FX, PW211, PW211X, PW211F, PW211FX, PW214, PW214Z, PW214X, PW214XZ, PW214F, PW214FZ, PW214FX, PW214FXZ, PW2510, PW2510X, PW2510F, PW2510FX, PW2511, PW2511X, PW2511F, PW2511FX, PW2514, PW2514Z, PW2514X, PW2514XZ, PW2514F, PW2514FZ, PW2514FX, PW2514FXZ, PW310, PW310X, PW310F, PW310FX, PW311, PW311X, PW311F, PW311FX, PW314, PW314Z, PW314X, PW314XZ, PW314F, PW314FZ, PW314FX, PW314FXZ, PW3510, PW3510X, PW3510F, PW3510FX, PW3511, PW3511X, PW3511F, PW3511FX, PW3514, PW3514Z, PW3514X, PW3514XZ, PW3514F, PW3514FZ, PW3514FX, PW3514FXZ, PW410, PW410X, PW410F, PW410FX, PW411, PW411X, PW411F, PW411FX, PW414, PW414Z, PW414X, PW414XZ, PW414F, PW414FZ, PW414FX, PW414FXZ, RW0710, RW0710X, RW0710F, RW0710FX, RW0711, RW0711X, RW0711F, RW711FX, RW0714, RW0714Z, RW0714X, RW0714XZ, RW0714F, RW0714FZ, RW0714FX, RW0714FXZ, RW110, RW110X, RW110F, RW110FX, RW111, RW111X, RW111F, RW111FX, RW114, RW114Z, RW114X, RW114XZ, RW114F, RW114FZ, RW114FX, RW114FXZ, RW1510, RW1510X, RW1510F, RW1510FX, RW1511, RW1511X, RW1511F, RW1511FX, RW1514, RW1514Z, RW1514X, RW1514XZ, RW1514F, RW1514FZ, RW1514FX, RW1514FXZ, RW210, RW210X, RW210F, RW210FX, RW211, RW211X, RW211F, RW211FX, RW214, RW214Z, RW214X, RW214XZ, RW214F, RW214FZ, RW214FX, RW214FXZ, RW2510, RW2510X, RW2510F, RW2510FX, RW2511, RW2511X, RW2511F, RW2511FX, RW2514, RW2514Z, RW2514X, RW2514XZ, RW2514F, RW2514FZ, RW2514FX, RW2514FXZ, RW310, RW310X, RW310F, RW310FX, RW311, RW311X, RW311F, RW311FX, RW314, RW314Z, RW314X, RW314XZ, RW314F, RW314FZ, RW314FX, RW314FXZ, RW3510, RW3510X, RW3510F, RW3510FX, RW3511, RW3511X, RW3511F, RW3511FX, RW3514, RW3514Z, RW3514X, RW3514XZ, RW3514F, RW3514FZ, RW3514FX, RW3514FXZ, RW410, RW410X, RW410F, RW410FX, RW411, RW411X, RW411F, RW411FX, RW414, RW414Z, RW414X, RW414XZ, RW414F, RW414FZ, RW414FX, RW414FXZ QUICK CONNECTION Ø14.5 MM 24 SERIES - BRASS VERSION CW031, CW034, CW034Z, CW051, CW054, CW054Z, CW071, CW074, CW074Z, CW101, CW104, CW104Z, CW151, CW154, CW154Z, CW181, CW184, CW184Z, CW201, CW204, CW204Z, CW231, CW234, CW234Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 24 SERIES - INOX VERSION CW0311, CW0314, CW0314Z, CW0511, CW0514, CW0514Z, CW0711, CW0714, CW0714Z, CW111, CW114, CW114Z, CW1511, CW1514, CW1514Z, CW1811, CW1814, CW1814Z, CW211, CW214, CW214Z, CW2311, CW2314, CW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 26 SERIES - BRASS VERSION MW030, MW031, MW034, MW034Z, MW050, MW051, MW054, MW054Z, MW070, MW071, MW074, MW074Z, MW100, MW101, MW104, MW104Z, MW150, MW151, MW154, MW154Z, MW180, MW181, MW184, MW184Z, MW200, MW201, MW204, MW204Z, MW230, MW231, MW234, MW234Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 26 SERIES – INOX VERSION MW0310, MW0311, MW0314, MW0314Z, MW0510, MW0511, MW0514, MW0514Z, MW0710, MW0711, MW0714, MW0714Z, MW110, MW111, MW114, MW114Z, MW1510, MW1511, MW1514, MW1514Z, MW1810, MW1811, MW1814, MW1814Z, MW210, MW211, MW214, MW214Z, MW2310, MW2311, MW2314, MW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 28 SERIES - BRASS VERSION PW500, PW500F, PW501, PW501F,, PW504, PW504F, PW600, PW600F, PW601, PW601F,, PW604, PW604F, PW700, PW700F, PW701, PW701F, PW704, PW704F, PW800, PW800F, PW801, PW801F,PW804, PW804F, PW900, PW900F, PW901, PW901F, PW904, PW904F, PW1000, PW1000F, PW1001, PW1001F, PW1004, PW1004F 1/2” BSP F inlet/outlet or 1/2” NPT F inlet/outlet 28 SERIES – INOX VERSION PW510, PW510F, PW511, PW511F, PW514, PW514F, PW610, PW610F, PW611, PW611F, PW614, PW614F, PW710, PW710F, PW711, PW711F, PW714, PW714F, PW810, PW810F, PW811, PW811F, PW814, PW814F, PW910, PW910F, PW911, PW911F, PW914, PW914F, PW1010, PW1010F, PW1011, PW1011F, PW1014, PW1014F 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 31 SERIES - BRASS VERSION TSFROT070AW, TSFROT071AW, TSFROT074AW, TSFROT100AW, TSFROT101AW, TSFROT104AW, TSFROT150AW, TSFROT151AW, TSFROT154AW, TSFROT200AW, TSFROT201AW, TSFROT204AW, TSFROT250AW, TSFROT251AW, TSFROT254AW, TSFROT300AW, TSFROT301AW, TSFROT304AW, TSFROT350AW, TSFROT351AW, TSFROT354AW, TSFROT400AW, TSFROT401AW, TSFROT404AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 31 SERIES – INOX VERSION TSFRSS070AW, TSFRSS071AW, TSFRSS074AW, TSFRSS100AW, TSFRSS101AW, TSFRSS104AW, TSFRSS150AW, TSFRSS151AW, TSFRSS154AW, TSFRSS200AW, TSFRSS201AW, TSFRSS204AW, TSFRSS250AW, TSFRSS251AW, TSFRSS254AW, TSFRSS300AW, TSFRSS301AW, TSFRSS304AW, TSFRSS350AW, TSFRSS351AW, TSFRSS354AW, TSFRSS400AW, TSFRSS401AW, TSFRSS404AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 32 SERIES - BRASS VERSION TMFROT030AW, TMFROT031AW, TMFROT034AW, TMFROT050AW, TMFROT051AW, TMFROT054AW, TMFROT070AW, TMFROT071AW, TMFROT074AW, TMFROT100AW, TMFROT101AW, TMFROT104AW, TMFROT150AW, TMFROT151AW, TMFROT154AW, TMFROT180AW, TMFROT181AW, TMFROT184AW, TMFROT200AW, TMFROT201AW, TMFROT204AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 32 SERIES – INOX VERSION TMFRSS030AW, TMFRSS031AW, TMFRSS034AW, TMFRSS050AW, TMFRSS051AW, TMFRSS054AW, TMFRSS070AW, TMFRSS071AW, TMFRSS074AW, TMFRSS100AW, TMFRSS101AW, TMFRSS104AW, TMFRSS150AW, TMFRSS151AW, TMFRSS154AW, TMFRSS180AW, TMFRSS181AW, TMFRSS184AW, TMFRSS200AW, TMFRSS201AW, TMFRSS204AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 33 SERIES - BRASS VERSION TW500, TW501, TW504, TW600, TW601, TW604, TW700, TW701, TW704, TW800, TW801, TW804, TW900, TW901, TW904, TW1000, TW1001, TW1004 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 33 SERIES – INOX VERSION TW510, TW511, TW514, TW610, TW611, TW614, TW710, TW711, TW714, TW810, TW811, TW814, TW910, TW911, TW914, TW1010, TW1011, TW1014 1/2” BSP F inlet/outlet or 1/2” NPT F inlet/outlet 34 SERIES – INOX VERSION TW310, TW311, TW314, TW410, TW0411, TW0414 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet

Approval Holder:

Fluid-o-Tech

Company Name

Fluid-o-Tech

Address

Via Leonardo Da Vinci, 40 20094 - Corsico (Milano) Italy

View All Listings by this Company

Manufacturer:

Fluid-o-Tech

Company Name

Fluid-o-Tech

Address

Via Leonardo Da Vinci, 40 20094 - Corsico (Milano) Italy

View All Listings by this Company

Range of shower outlets and shower sets, the inlet incorporates a single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). The product incorporates a flow regulator. Open outlet use only. Maximum operating temperature 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

260104018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

33095 & 66123 - Gessi etched on to body 58252 - Gessi etched on to rosette 57801 - Gessi etched on to shower face 57409 – Gessi & other info printed on adhesive label on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Model:

66123 – Origini - Shower set 33095 – Ispa - Wall mounted headshower 57409 – Afilo - Ceiling mounted headshower 57801 – Acciaio - Ceiling mounted headshower 58252 – Inciso - Ceiling mounted headshower

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Range of wall mounted shower heads with (chrome plated brass finish). The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. Open outlet use only. Maximum operating temperature PD15251: 65°C and AT89051:70 °C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

260108001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

AT89051 – ½’’ BSP /15mm compression PD15251 – ½” BSP Male

Marking:

Silfra (Brand of Cristina) etched on the underside or upper side of the shower head.

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Model:

AT89051 – Silfra, PD15251 – Silfra.

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Manufacturer:

Cristina Rubinetterie S.r.L

Company Name

Cristina Rubinetterie S.r.L

Address

Via Fava, 56, 28024 Gozzano NO

Country

Italy

General Email

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Ceiling Mounted. Undefinable Airgap - See IRNs.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Approval Holder:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Manufacturers:

Xiamen Delmei Sanitary Ware Co., Ltd

Section:

1650 Shower Outlets

Description:

A Shower head(s) and/or shower handset(s).

Brass body. Aerator at outlet.

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R040

Expiry date:

28/02/2031

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Hand Shower.

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R040

Expiry date:

28/02/2031

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe Wasselonne S.A.S

Section:

1650 Shower Outlets

Description:

A Shower head(s) and/or shower handset(s).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

28/02/2031

Notes & Further Information

Aqualisa 1001357** ** represents the following colour/finish codes: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company