Stainless steel pressure transducer. Maximum working pressure 20.0 Bar. Maximum operating temperature 50.0°C.
Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C
Range of cold water booster sets comprising of multistage stainless steel pumps and manifolds with a common control panel and motor mounted inverters. The products incorporate spherical valves between the inlet and outlet manifolds and the pumps. The outlet manifold incorporates an anti-head loss valve and a flow through valve with an expansion vessel factory pre-set at 10.0 bar. Maximum working pressure 10.0 bar. Cold water use only.
Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.
Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.
Range of, wall mounted shower outlets (chromium plated brass). Inlets incorporate a plastic flow regulator. Open outlet Maximum operating temperature 60.0°C
Range of wall mounted (chromium plated brass bodies) spray outlets, incorporating a plastic flow regulator at the inlet and a plastic aerator. Open outlet use only. Maximum operating temperature 60.0°C
Range of deck mounted pull out kits (various finishes) comprising of a shower handset, shower hose and a stainless steel braided silicone lined connecting hose. The shower handsets incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. Maximum operating temperature: 60°C. Open outlet use only.
Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.
Shower handsets, incorporates a stainless steel strainer washer at the inlet. Maximum operating temperature 65°C.
Range of shower handsets with plastic bodies.
Non-metallic materials and components comply with BS6920 at 70°C
Range of strainers with epoxy coated ductile iron bodies and stainless-steel mesh. Maximum working pressure 25 Bar Maximum operating temperature 85°C
Range of pressure sensors with stainless steel bodies. Models consist of a sensor and male threaded end. Maximum working pressure: See Models. Maximum operating temperature 90°C.
Drain off cock with a DZR brass body, non-rising spindle headwork and EPDM seals and washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of Pillar taps (chrome plated brass) bodies incorporating non-rising spindle headworks with cross top operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.
Range of pillar taps (chrome plated brass) bodies incorporating quarter turn ceramic disc headwork and cross type operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of pillar taps (chrome plated brass bodies), incorporating non-rising spindle headworks with dome type operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of Pillar taps (chrome plated brass) bodies incorporating non-rising spindle headworks with cross top operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.
Range of pillar taps (chrome plated brass bodies), incorporating non-rising spindle headworks with dome type operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of Single Layer PPRCT Solid Pipes (SDR7.4) comprising of green coloured PPRCT material. Not approved for use with any fittings. Maximum working pressure 23.4 bar. Cold water above ground use only.
Page 381 of 427
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
