Directory Search Results

Fittings Materials
Print List

#240702015

Wall elbow with brass body (chromium plated) incorporating two check valves cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240702015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M) inlet x 3/8” BSP (F) outlet
Marking:
Dornbracht logo on cover plate.
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
28450809 - Vaia.,
Product Images
Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval

#240702017

Range of overhead shower outlets, (chrome plated brass bodies) incorporating flow regulators on the inlets. Model (716000) is wall mounted, all other models are ceiling mounted. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240702017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Delabie on body
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
709000: Round recessed shower head 709010: Round shower head for panel 709200: Round shower head for cross wall 712000: Tonic Jet recessed shower head 712010: Tonic Jet shower head for panel 716000: Gym ceiling mounted shower head
Product Images
Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval

#240702018

White plastic shower handset. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240702018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Triton on body
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
88500098
Product Images
Approval Holder:
Triton Showers
Company Name
Triton Showers
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
02476 324423
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company

Print This Approval

#240204067

Range of drain taps with brass or DZR brass body (some models chrome plated) and rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
240204067
Size:
see model
Marking:
CPS, size, date of manufacture (MM/YY) and WRAS on body. DZR brass models are also marked with CR.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
Models with DZR brass body: 500341 (natural): 15mm tail. Models with HPb59-3 brass body: 961131 (natural): 15mm tail.
Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval

#240604017

Range of stainless-steel or nylon braided PEX lined hoses, incorporating EPDM O-ring or gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240604017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN8
Marking:
Company Logo DJ, WRAS and date of manufacture (YYYY-MM) on ferrule.
Installation Requirements:
R001 R008
Expiry date:
30/06/2029
Model:
DJB-A-A-B-*** A - Type of Nut/Connection Fitting -01: M8 -02: M10 -03: M12 -04: M15 -05: F3/8 -06: F1/2 -07: F3/4 -08: F15 -09: M3/8 -10: M1/2 -11: M3/4 -12: G1/2 -13: Quick coupling (M) -14: Quick coupling (F) B - Braiding -01: Stainless steel -02: Nylon ***- Length 10cm-300cm
Product Images
Approval Holder:
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Company Name
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Address
No. 58 Jinshan East Avenue Shuikou Town Kaiping City Guangdong
Country
China

View All Listings by this Company
Manufacturer:
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Company Name
Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.
Address
No. 58 Jinshan East Avenue Shuikou Town Kaiping City Guangdong
Country
China

View All Listings by this Company

Print This Approval

#240604021

Range of stainless steel braided TPSiV lined flexible hose assemblies incorporating EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240604021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Tucai, WRAS, Date of manufacture: TB-YY/DDD etched on crimp connection
Installation Requirements:
R001 R008
Expiry date:
30/06/2029
Model:
206525 TAQ FLX DN6 HG 3838 3/8” BSP (F) captive nut x 3/8” BSP (F) captive nut 208895 TAQ FLX CODO HG 3838 3/8” BSP (F) captive nut x 3/8” BSP (F) elbow incorporating captive nut
Product Images
Approval Holder:
Tucai SA
Company Name
Tucai SA
Address
Llobateras 10-12, Poligomo Industrial Santiga, 08210 Barbera Del Valles (Barcelona)
Country
Spain
Phone
+34 93 718 9562

View All Listings by this Company
Manufacturer:
Tucai Bulgaria SP Ltd.
Company Name
Tucai Bulgaria SP Ltd.
Address
7538 Aydemir Village 39 Chernozem Street Silistra Region
Country
Bulgaria

View All Listings by this Company

Print This Approval

#2103349

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103349
Size:
DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:
Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13
Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

Print This Approval

#240202092

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202092
Size:
See Models
Marking:
Brymec, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
DN10 30909 50cm length & 30925 30cm length - 15mm compression x 1/2"F captive nut 30911 50cm length & 30917 30cm length - 15mm compression x 3/4"F captive nut DN13 30904 50cm length & 30913 30cm length - 15mm compression x 1/2"F captive nut 30927 15mm compression x 3/4"F captive nut 30942 50cm length & 30928 30cm length - 22mm compression x 3/4"F captive nut 30903 DN19 22mm compression x 3/4"F captive nut DN10 30924 - 15mm isolating valve x 1/2"F captive nut DN13 30921- 22mm isolating valve x 3/4"F captive nut 30934 50cm length & 30926 30cm length - 15mm compression x 15mm compression DN13 30945 50cm length & 30932 30cm length- 22mm compression x 22mm compression
Approval Holder:
Brymec Ltd
Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

Print This Approval

#2103350

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103350
Size:
DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:
Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13
Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

Print This Approval

#2103351

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2103351
Size:
DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:
Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
29030007 F1/2" X F1/2”X 30CM DN10 29030008 F3/4" X F3/4”X 30CM DN13 29030011 F3/8”X15MM X 30CM DN10 29030020 F1/2”X15MM X 30CM DN10 29030065 F1/2”X15MM X 50CM DN10 29030101 F1/2”X15MM X 90CM DN10 29030104 F1/2”X15MM X 100CM DN10 29030119 F3/4”X15MM X 30CM DN10 29030137 F3/4”X15MM X 50CM DN10 29030141 F3/4”X15MM X 100CM DN10 29030236 15MM X15MM X 30CM DN10 29030272 15MM X15MM X 50CM DN10 10000201 15MM X15MM X 100CM DN10 29030245 15MM X15MM X 30CM DN13 29030281 15MM X15MM X 50CM DN13 29030029 F1/2”X15MM X 30CM DN13 29030074 F1/2”X15MM X 50CM DN13 29030110 F1/2”X15MM X 100CM DN13 29030155 F3/4”X22MM X 30CM DN13 29030191 F3/4”X22MM X 50CM DN13 29030218 F3/4”X22MM X 90CM DN13 29030221 F3/4”X22MM X 100CM DN13 29030128 F3/4”X15MM X 30CM DN13 29030146 F3/4”X15MM X 50CM DN13 29030290 22MM X22MM X 30CM DN13 10000202 22MM X22MM X 50CM DN13 29030047 F1/2”X15MM ISO VALVE X 30CM DN10 29030083 F1/2”X15MM ISO VALVE X 50CM DN10 29030254 15MM X15MM ISO VALVE X 30CM DN10 29030182 F3/4”X22MM ISO VALVE X 30CM DN13 29030209 F3/4”X22MM ISO VALVE X 50CM DN13 29030400 F1/2”X15MM PUSHFIT X 30CM DN10 29030402 F1/2”X15MM PUSHFIT X 50CM DN10 29030404 F3/4”X15MM PUSHFIT X 30CM DN10 29030406 F3/4”X22MM PUSHFIT X 30CM DN13 29030408 F1/2”X15MM PUSHFIT WITH ISO VALVE X 30CM DN10 29030410 15MM PUSHFIT X15MM PUSHFIT X 30CM DN10 29030164 F3/4”X22MM X 30CM DN19 29030200 F3/4”X22MM X 50CM DN19 29030227 F3/4”X22MM X 90CM DN19 29030308 15MM X 10MMX30CM DN8 29030317 15MM X 12MMX30CM DN10
Approval Holder:
Primaflow F & P
Company Name
Primaflow F & P
Address
Votec House, Hambridge Lane, Newbury
Postcode
RG14 5TN
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan
Postcode
317600
Country
China
Phone
86-576-89901684

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 309 of 408

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.