Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309366

Size:

See model.

Marking:

Lawton tubes logo, EN1254 and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

EFBTC0151/2: 15MM X 1/2" Bent Tap Connector EF, EFBTC0223/4: 22MM X 3/4" Bent Tap Connector EF, EFCOFI0151/2: 15MM X 1/2" Female Adaptor Brass EF, EFCOFI0153/4: 15MM X 3/4" Female Adaptor Brass EF, EFCOFI0221/2: 22MM X 1/2" Female Adaptor Brass EF, EFCOFI0223/4: 22MM X 3/4" Female Adaptor Brass EF, EFCOFI0281: 28MM X 1" Female Adaptor Brass EF, EFCOFI0283/4: 28MM X 3/4" Female Adaptor Brass EF, EFCOFI03511/4: 35MM X 1.1/4" Female Adaptor Brass EF, EFCOFI04211/2: 42MM X 1.1/2" Female Adaptor Brass EF, EFCOFI0542: 54MM X 2" Female Adaptor Brass EF, EFCOFI06721/2: 66.7MM X 2.1/2" Female Adaptor Brass EF, EFCOFI0763: 76MM X 3" Female Adaptor Brass EF, EFCOFI1084: 108MM X 4" Female Adaptor Brass EF, EFCOMI0151/2: 15MM X 1/2" Male Adaptor Brass EF, EFCOMI0223/4: 22MM X 3/4" Male Adaptor Brass EF, EFCOMI0281: 28MM X 1" Male Adaptor Brass EF, EFCOMI03511/4: 35MM X 1.1/4" Male Adaptor Brass EF, EFCOMI04211/2: 42MM X 1.1/2" Male Adaptor Brass EF, EFCOMI0542: 54MM X 2" Male Adaptor Brass EF, EFCOMI06721/2: 66.7MM X 2.1/2" Male Adaptor Brass EF, EFCOMI0763: 76MM X 3" Male Adaptor Brass EF, EFCOMI1084: 108MM X 4" Male Adaptor Brass EF, EFCP008: 8MM Coupler EF, EFCP010: 10MM Coupler EF, EFCP015: 15MM Coupler EF, EFCP022: 22MM Coupler EF, EFCP028: 28MM Coupler EF, EFCP035: 35MM Coupler EF, EFCP042: 42MM Coupler EF, EFCP054: 54MM Coupler EF, EFCP067: 66.7MM Coupler EF, EFCP076: 76.1MM Coupler EF, EFCP108: 108MM Coupler EF, EFCP133: 133MM Coupler EF, EFCP159: 159MM Coupler EF, EFCP219: 219MM Coupler EF, EFCP0108: 10MM X 8MM Reducer Coupler EF, EFCP01510: 15MM X 10MM Reducer Coupler EF, EFCP01512: 15MM X 12MM Reducer Coupler EF, EFCP0158: 15MM X 8MM Reducer Coupler EF, EFCP02215: 22MM X 15MM Reducer Coupler EF, EFCP02815: 28MM X 15MM Reducer Coupler EF, EFCP02822: 28MM X 22MM Reducer Coupler EF, EFCP03528: 35MM X 28MM Reducer Coupler EF, EFCP04235: 42MM X 35MM Reducer Coupler EF, EFCP05422: 54MM X 22MM Reducer Coupler EF, EFCP05442: 54MM X 42MM Reducer Coupler EF, EFCP06728: 66.7MM X 28MM Reducer Coupler EF, EFCP06754: 66.7MM X 54MM Reducer Coupler EF, EFCP07635: 76.1MM X 35MM Reducer Coupler EF, EFCP07642: 76.1MM X 42MM Reducer Coupler EF, EFCP07654: 76.1MM X 54MM Reducer Coupler EF, EFCP07667: 76.1MM X 66.7MM Reducer Coupler EF, EFCP10854: 108MM X 54MM Reducer Coupler EF, EFCP10867: 108MM X 66.7MM Reducer Coupler EF, EFCP10876: 108MM X 76.1MM Reducer Coupler EF, EFCP0151/2: 15MM X 1/2" Adaptor Coupler (Metric/Imperial) EF, EFCP0223/4: 22MM X 3/4" Adaptor Coupler (Metric/Imperial) EF, EFCP0281: 28MM X 1" Adaptor Coupler (Metric/Imperial) EF, EFCP03511/4: 35MM X 1.1/4" Adaptor Coupler (Metric/Imperial) EF, EFCU0221: 22MM X 1" Straight Cylinder Union EF, EFCU0281: 28MM X 1" Straight Cylinder Union EF, EFEC008: 8MM End Cap EF, EFEC010: 10MM End Cap EF, EFEC012: 12MM End Cap EF, EFEC015: 15MM End Cap EF, EFEC022: 22MM End Cap EF, EFEC028: 28MM End Cap EF, EFEC035: 35MM End Cap EF, EFEC042: 42MM End Cap EF, EFEC054: 54MM End Cap EF, EFEC067: 66.7MM End Cap EF, EFEC076: 76.1MM End Cap EF, EFEC108: 108MM End Cap EF, EFEC133: 133MM End Cap EF, EFEC159: 159MM End Cap EF, EFEL008: 8MM 90° Elbow EF, EFEL010: 10MM 90° Elbow EF, EFEL015: 15MM 90° Elbow EF, EFEL022: 22MM 90° Elbow EF, EFEL028: 28MM 90° Elbow EF, EFEL035: 35MM 90° Elbow EF, EFEL042: 42MM 90° Elbow EF, EFEL054: 54MM 90° Elbow EF, EFEL067: 66.7MM 90° Elbow EF, EFEL076: 76.1MM 90° Elbow EF, EFEL108: 108MM 90° Elbow EF, EFEL133: 133MM 90° Elbow EF, EFEL159: 159MM 90° Elbow EF, EFEL219: 219MM 90° Elbow EF, EFELFI0151/2: 15MM X 1/2" Female Elbow Brass EF, EFELFI0221/2: 22MM X 1/2" Female Elbow Brass EF, EFELFI0223/4: 22MM X 3/4" Female Elbow Brass EF, EFELFI0281: 28MM X 1" Female Elbow Brass EF, EFELLR015: 15MM Long Radius 90° Elbow EF, EFELLR022: 22MM Long Radius 90° Elbow EF, EFELLR028: 28MM Long Radius 90° Elbow EF, EFELLR067: 66.7MM Long Radius 90° Elbow EF, EFELLR076: 76.1MM Long Radius 90° Elbow EF, EFELLR108: 108MM Long Radius 90° Elbow EF, EFELMI0151/2: 15MM X 1/2" Male Elbow Brass EF, EFELMI0223/4: 22MM X 3/4" Male Elbow Brass EF, EFELMI0281: 28MM X 1" Male Elbow Brass EF, EFELS015: 15MM 90° Street Elbow EF, EFELS022: 22MM 90° Street Elbow EF, EFELS028: 28MM 90° Street Elbow EF, EFELS035: 35MM 90° Street Elbow EF, EFELS042: 42M 90° Street Elbow EF, EFELS054: 54MM 90° Street Elbow EF, EFELSLT015: 15MM 90° Long Tail Street Elbow EF, EFELSLT022: 22MM 90° Long Tail Street Elbow EF, EFELWC0151/2: 15MM X 1/2" Gas Connector Elbow Brass EF, EFELWL0151/2: 15MM X 1/2" Wallplate Elbow Brass EF, EFELWL0223/4: 22MM X 3/4" Wallplate Elbow Brass EF, EFEL00845: 8MM X 45° Elbow EF, EFEL01045: 10MM X 45° Elbow EF, EFEL01545: 15MM X 45° Elbow EF, EFEL02245: 22MM X 45° Elbow EF, EFEL02845: 28MM X 45° Elbow EF, EFEL03545: 35MM X 45° Elbow EF, EFEL04245: 42MM X 45° Elbow EF, EFEL05445: 54MM X 45° Elbow EF, EFEL06745: 66.7MM X 45° Elbow EF, EFEL07645: 76.1MM X 45° Elbow EF, EFEL10845: 108MM X 45° Elbow EF, EFEL13345: 133MM X 45° Elbow EF, EFEL15945: 159MM X 45° Elbow EF, EFEL21945: 219MM X 45° Elbow EF, EFELS01545: 15MM X 45° Street Elbow EF, EFELS02245: 22MM X 45° Street Elbow EF, EFELS02845: 28MM X 45° Street Elbow EF, EFELS03545: 35MM X 45° Street Elbow EF, EFELS04245: 42MM X 45° Street Elbow EF, EFELS05445: 54MM X 45° Street Elbow EF, EFELS06745: 66.7MM X 45° Street Elbow EF, EFELS07645: 76.1MM X 45° Street Elbow EF, EFFCO015: 15MM Full Crossover EF, EFFCO022: 22MM Full Crossover EF, EFFCO028: 28MM Full Crossover EF, EFPCO015: 15MM Part Crossover EF, EFPCO022: 22MM Part Crossover EF, EFRED0108: 10MM X 8MM Fitting Reducer EF, EFRED01510: 15MM X 10MM Fitting Reducer EF, EFRED0158: 15MM X 8MM Fitting Reducer EF, EFRED02215: 22MM X 15MM Fitting Reducer EF, EFRED02815: 28MM X 15MM Fitting Reducer EF, EFRED02822: 28MM X 22MM Fitting Reducer EF, EFRED03515: 35MM X 15MM Fitting Reducer EF, EFRED03522: 35MM X 22MM Fitting Reducer EF, EFRED03528: 35MM X 28MM Fitting Reducer EF, EFRED04215: 42MM X 15MM Fitting Reducer EF, EFRED04222: 42MM X 22MM Fitting Reducer EF, EFRED04228: 42MM X 28MM Fitting Reducer EF, EFRED04235: 42MM X 35MM Fitting Reducer EF, EFRED05415: 54MM X 15MM Fitting Reducer EF, EFRED05422: 54MM X 22MM Fitting Reducer EF, EFRED05428: 54MM X 28MM Fitting Reducer EF, EFRED05435: 54MM X 35MM Fitting Reducer EF, EFRED05442: 54MM X 42MM Fitting Reducer EF, EFRED06728: 66.7MM X 28MM Fitting Reducer EF, EFRED06735: 66.7MM X 35MM Fitting Reducer EF, EFRED06742: 66.7MM X 42MM Fitting Reducer EF, EFRED06754: 66.7MM X 54MM Fitting Reducer EF, EFRED07635: 76.1MM X 35MM Fitting Reducer EF, EFRED07642: 76.1MM X 42MM Fitting Reducer EF, EFRED07654: 76.1MM X 54MM Fitting Reducer EF, EFRED07667: 76.1MM X 66.7MM Fitting Reducer EF, EFRED10842: 108MM X 42MM Fitting Reducer EF, EFRED10854: 108MM X 54MM Fitting Reducer EF, EFRED10867: 108MM X 66.7MM Fitting Reducer EF, EFRED10876: 108MM X 76.1MM Fitting Reducer EF, EFRED133108: 133MM X 108MM Fitting Reducer EF, EFRED13367: 133MM X 66.7MM Fitting Reducer EF, EFRED13376: 133 X 76.1MM Fitting Reducer EF, EFRED159108: 159MM X 108MM Fitting Reducer EF, EFRED159133: 159MM X 133MM Fitting Reducer EF, EFRED15976: 159MM X 76.1MM Fitting Reducer EF, EFRED219159: 219MM X 159MM Fitting Reducer EF, EFREDLT01510: 15MM X 10MM Long Tail Fitting Reducer EF, EFREDLT0158: 15MM X 8MM Long Tail Fitting Reducer EF, EFSC015: 15MM Slip Coupler EF, EFSC022: 22MM Slip Coupler EF, EFSC028: 28MM Slip Coupler EF, EFSC035: 35MM Slip Coupler EF, EFSC042: 42MM Slip Coupler EF, EFSC054: 54MM Slip Coupler EF, EFSTC0151/2: 15MM X 1/2" Straight Tap Connector EF, EFSTC0153/4: 15MM X 3/4" Straight Tap Connector EF, EFSTC0223/4: 22MM X 3/4" Straight Tap Connector EF, EFTE008: 8MM Equal Tee EF, EFTE010: 10MM Equal Tee EF, EFTE015: 15MM Equal Tee EF, EFTE022: 22MM Equal Tee EF, EFTE028: 28MM Equal Tee EF, EFTE035: 35MM Equal Tee EF, EFTE042: 42MM Equal Tee EF, EFTE054: 54MM Equal Tee EF, EFTE067: 66.7MM Equal Tee EF, EFTE076: 76.1MM Equal Tee EF, EFTE108: 108MM Equal Tee EF, EFTE133: 133MM Equal Tee EF, EFTE159: 159MM Equal Tee EF, EFTE219: 219MM Equal Tee EF, EFTE0151508: 15MM X 15MM X 8MM Reducer Tee EF, EFTE0151510: 15MM X 15MM X 10MM Reducer Tee EF, EFTE0151522: 15MM X 15MM X 22MM Reducer Tee EF, EFTE0221515: 22MM X 15MM X 15MM Reducer Tee EF, EFTE0221522: 22MM X 15MM X 22MM Reducer Tee EF, EFTE0222215: 22MM X 22MM X 15MM Reducer Tee EF, EFTE0222228: 22MM X 22MM X 28MM Reducer Tee EF, EFTE0281515: 28MM X 15MM X 15MM Reducer Tee EF, EFTE0281528: 28MM X 15MM X 28MM Reducer Tee EF, EFTE0282215: 28MM X 22MM X 15MM Reducer Tee EF, EFTE0282222: 28MM X 22MM X 22MM Reducer Tee EF, EFTE0282228: 28MM X 22MM X 28MM Reducer Tee EF, EFTE0282815: 28MM X 28MM X 15MM Reducer Tee EF, EFTE0282822: 28MM X 28MM X 22MM Reducer Tee EF, EFTE0282835: 28MM X 28MM X 35MM Reducer Tee EF, EFTE0351535: 35MM X 15MM X 35MM Reducer Tee EF, EFTE0352222: 35MM X 22MM X 22MM Reducer Tee EF, EFTE0352235: 35MM X 22MM X 35MM Reducer Tee EF, EFTE0352822: 35MM X 28MM X 22MM Reducer Tee EF, EFTE0352828: 35MM X 28MM X 28MM Reducer Tee EF, EFTE0352835: 35MM X 28MM X 35MM Reducer Tee EF, EFTE0353515: 35MM X 35MM X 15MM Reducer Tee EF, EFTE0353522: 35MM X 35MM X 22MM Reducer Tee EF, EFTE0353528: 35MM X 35MM X 28MM Reducer Tee EF, EFTE0421542: 42MM X 15MM X 42MM Reducer Tee EF, EFTE0422242: 42MM X 22MM X 42MM Reducer Tee EF, EFTE0422828: 42MM X 28MM X 28MM Reducer Tee EF, EFTE0422842: 42MM X 28MM X 42MM Reducer Tee EF, EFTE0423528: 42MM X 35MM X 28MM Reducer Tee EF, EFTE0423535: 42MM X 35MM X 35MM Reducer Tee EF, EFTE0423542: 42MM X 35MM X 42MM Reducer Tee EF, EFTE0424215: 42MM X 42MM X 15MM Reducer Tee EF, EFTE0424222: 42MM X 42MM X 22MM Reducer Tee EF, EFTE0424228: 42MM X 42MM X 28MM Reducer Tee EF, EFTE0424235: 42MM X 42MM X 35MM Reducer Tee EF, EFTE0544242: 54MM X 42MM X 42MM Reducer Tee EF, EFTE0544254: 54MM X 42MM X 54MM Reducer Tee EF, EFTE0545415: 54MM X 54MM X 15MM Reducer Tee EF, EFTE0545422: 54MM X 54MM X 22MM Reducer Tee EF, EFTE0545428: 54MM X 54MM X 28MM Reducer Tee EF, EFTE0545435: 54MM X 54MM X 35MM Reducer Tee EF, EFTE0545442: 54MM X 54MM X 42MM Reducer Tee EF, EFTE0676728: 66.7MM X 66.7MM X 28MM Reducer Tee EF, EFTE0676735: 66.7MM X 66.7MM X 35MM Reducer Tee EF, EFTE0676742: 66.7MM X 66.7MM X 42MM Reducer Tee EF, EFTE0676754: 66.7MM X 66.7MM X 54MM Reducer Tee EF, EFTE0767628: 76.1MM X 76.1MM X 28MM Reducer Tee EF, EFTE0767635: 76.1MM X 76.1MM X 35MM Reducer Tee EF, EFTE0767642: 76.1MM X 76.1MM X 42MM Reducer Tee EF, EFTE0767654: 76.1MM X 76.1MM X 54MM Reducer Tee EF, EFTE0767667: 76.1MM X 76.1MM X 66.7MM Reducer Tee EF, EFTE10810835: 108MM X 108MM X 35MM Reducer Tee EF, EFTE10810842: 108MM X 108MM X 42MM Reducer Tee EF, EFTE10810854: 108MM X 108MM X 54MM Reducer Tee EF, EFTE10810867: 108MM X 108MM X 66.7MM Reducer Tee EF, EFTE10810876: 108MM X 108MM X 76.1MM Reducer Tee EF, EFTE159159108: 159MM X 159MM X 108MM Reducer Tee EF, EFTE159159133: 159MM X 159MM X 133MM Reducer Tee EF, EFTE15915976: 159MM X 159MM X 76.1MM Reducer Tee EF, EFTEFI015151/2: 15MM X 15MM X 1/2" Reducer Tee Brass EF, EFTEFI022221/2: 22MM X 22MM X 1/2" Reducer Tee Brass EF, EFTEFI022223/4: 22MM X 22MM X 3/4" Reducer Tee Brass EF, EFTEFI028281: 28MM X 28MM X 1" Reducer Tee Brass EF, EFTEFI028281/2: 28MM X 28MM X 1/2" Reducer Tee Brass EF, EFUNF0151/2: 15MM X 1/2" Female Union Adaptor Brass EF, EFUNF0223/4: 22MM X 3/4" Female Union Adaptor Brass EF, EFUNF0281: 28MM X 1" Female Union Adaptor Brass EF, EFUNF03511/4: 35MM X 1.1/4" Female Union Adaptor Brass EF, EFUNF04211/2: 42MM X 1.1/2" Female Union Adaptor Brass EF, EFUNF0542: 54MM X 2" Female Union Adaptor Brass EF, EFUNM0151/2: 15MM X 1/2" Male Union Adaptor Brass EF, EFUNM0223/4: 22MM X 3/4" Male Union Adaptor Brass EF, EFUNM0281: 28MM X 1" Male Union Adaptor Brass EF, EFUNM03511/4: 35MM X 1.1/4" Male Union Adaptor Brass EF, EFUNM04211/2: 42MM X 1.1/2" Male Union Adaptor Brass EF, EFUNM0542: 54MM X 2" Male Union Adaptor Brass EF, EFUNM06721/2: 67MM X 2.1/2" Male Union Adaptor Brass EF, EFUNM0763: 76MM X 3" Male Union Adaptor Brass EF.

Approval Holder:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Coventry

Postcode

CV4 9AB

Country

United Kingdom

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

mlis@lawtontubes.co.uk

View All Listings by this Company

AMEX-10 Vario internal pipe repair kit incorporating stainless steel retaining rings and EPDM seal. Maximum operating temperature 23°C.

Non-metallic materials and components comply with BS6920 at 23°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2309052

Size:

DN 600.

Marking:

Marking: AMEX-10 on internal face of seal.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

AMEX-10 Vario seal.

Approval Holder:

Planned Maintenance (Pennine) Ltd

Company Name

Planned Maintenance (Pennine) Ltd

Address

Bentley Wood Way Burnley

Postcode

BB11 5ST

View All Listings by this Company

Dual flush WC outlet valve with ABS body. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Maximum operating temperature – Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2309032

Size:

2” BSP (M)

Marking:

Oceanwell Xiamen industrial company and model on body

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/09/2028

Model:

D33-J318-01

Approval Holder:

OceanWell (Xiamen) Industrial Co Ltd

Company Name

OceanWell (Xiamen) Industrial Co Ltd

Address

No. 33, Shishan North Road, Dongfu Town Haicang District., Xiamen Province, P.R China

View All Listings by this Company

Manufacturer:

OceanWell (Xiamen) Industrial Co Ltd

Company Name

OceanWell (Xiamen) Industrial Co Ltd

Address

No. 33, Shishan North Road, Dongfu Town Haicang District., Xiamen Province, P.R China

View All Listings by this Company

Range of dual flush WC drop valves with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2307070

Size:

2’’ BSP (M)

Marking:

Nuie on body.

Installation Requirements:

R001 R571 R581

Expiry date:

31/07/2028

Model:

NUOU002 flush valve//Nuie Dual Flush WC Drop Valves

Approval Holder:

ROXOR GROUP

Company Name

ROXOR GROUP

Address

HAMNET HOUSE GIBBET STREET HALIFAX

Postcode

HX2 OAX

View All Listings by this Company

Range of urinal flushing mechanisms incorporating nylon bodies and a solenoid valve which controls the flow and is actuated via an infra-red sensor. The inlet of the solenoid valve incorporates a stainless-steel strainer. Maximum working pressure 5.0 bar. Cold water use only.

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

2309028

Size:

¾” BSP (F)

Marking:

Delabie on Sensor.

Installation Requirements:

R001 R075 R090

Expiry date:

30/09/2028

Model:

Tempomatic 4 Urinal 430SBOX - Recessed waterproof housing, mains supply 430000 wall plate 430010 wall plate 430020 wall plate 430030 wall plate 430PBOX - Recessed waterproof housing, battery supply 430006 wall plate 430016 wall plate 430026 wall plate 430036 wall plate

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a heat exchanger and pressurised central heating system. The products can be supplied with a rigid or flexible filling loop or keyless filling link. The flexible and rigid filling loops incorporate a flexible hose or copper pipe, isolation valve, double check valve assembly (suitable for back flow protection against fluid category 3). The keyless filling link incorporates a CAB backflow prevention device (suitable for back flow protection against fluid category 3). The products also incorporate an expansion vessel and pressure relief valve set at 3.0 bar. Maximum working pressure of primary circuit 2.5 bar. Maximum operating temperature of primary circuit 85°C Maximum working pressure of secondary circuit 8.0 bar Maximum operating temperature of secondary circuit 60°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2309044

Note:

When installing the keyless filling link, the discharge from the relief outlet port of this fitting must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Size:

¾” BSP (M) (primary circuit). ½” BSP (M) (secondary circuit).

Marking:

Baxi on front cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2028

Model:

7796586 BAXI 624 COMBI 2 7796587 BAXI 630 COMBI 2 7796588 BAXI 636 COMBI 2 7813609 BAXI 624 COMBI LPG 2 7814304 BAXI 824 COMBI 2 7814305 BAXI 830 COMBI 2 7814306 BAXI 836 COMBI 2 7814307 BAXI 830 COMBI LPG 2 7814308 BAXI 836 COMBI LPG 2 7814309 BAXI ASSURE 524 COMBI 2 7814310 BAXI ASSURE 530 COMBI 2 7814311 BAXI ASSURE 536 COMBI 2 7814312 BAXI ASSURE 530 COMBI LPG 2

Approval Holder:

Baxi Heating UK Limited

Company Name

Baxi Heating UK Limited

Address

Brooks House, Coventry Road, Warwick

Postcode

CV34 3LL

View All Listings by this Company

‘SATK 32’ range of indirect heat interface units providing instantaneous hot water. Domestic hot water is provided via a plate heat exchanger and this circuit incorporates a flow detector, stainless-steel filter and water hammer arrestor. The primary/space heating circuit incorporates a pressure relief valve set at 2.5 bar and an expansion vessel. Maximum working pressure of the domestic hot water circuit is 10.0 bar. Maximum working pressure of the primary circuit is 16.0 bar. Maximum working pressure of the space heating circuit is 2.5 bar. Maximum operating temperature 90°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2309313

Size:

¾” BSP (M).

Marking:

Caleffi and Caleffi logo moulded on face of unit. Caleffi, Caleffi logo, model number and technical info on data plate inside unit.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2028

Model:

SATK32103 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 50kW. SATK32105 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 60kW. SATK32107 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 75kW.

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

DZR brass elbow fitting. Compression connection to be used with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

2309341

Size:

½” captive nut x 15mm compression.

Marking:

Pintossi logo (letters ‘Pc’) and CR on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

5624D 1/2xØ15 (Model no. 0562431215).

Approval Holder:

PINTOSSI+C SPA

Company Name

PINTOSSI+C SPA

Address

VIA INDUSTRIALE 44 LUMEZZANE (BRESCIA) Italy

Postcode

25065

Country

Italy

Phone

+39 030 373 3138

General Email

alessandra@pintossi.it

View All Listings by this Company

Manufacturer:

PINTOSSI+C SPA

Company Name

PINTOSSI+C SPA

Address

VIA INDUSTRIALE 44 LUMEZZANE (BRESCIA) Italy

Postcode

25065

Country

Italy

Phone

+39 030 373 3138

General Email

alessandra@pintossi.it

View All Listings by this Company

Range of water meters with brass bodies, plastic transducers, and EPDM O-rings. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

¾”, 1”, 1¼”, 1½”, 2”, 2½” BSP (M)

Marking:

Integra logo, model, flow arrow, size and other technical information on case.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

TOPAS SONIC TSO DN15 TOPAS SONIC TSO DN20 TOPAS SONIC TSO DN25 TOPAS SONIC TSO DN32 TOPAS SONIC TSO DN40 TOPAS SONIC TSO DN50

Approval Holder:

INTEGRA Metering SAS

Company Name

INTEGRA Metering SAS

Address

18 avenue Escadrille Normandie Niemen BLAGNAC

Postcode

31700

Country

France

Phone

+33 561 112 356

General Email

seda.bourneuf@im-ultrasonic.com

View All Listings by this Company

Manufacturer:

INTEGRA Metering SAS

Company Name

INTEGRA Metering SAS

Address

18 avenue Escadrille Normandie Niemen BLAGNAC

Postcode

31700

Country

France

Phone

+33 561 112 356

General Email

seda.bourneuf@im-ultrasonic.com

View All Listings by this Company

Range of water meters with plastic bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1505 Water Meters

Size:

DN50, DN80 & DN100

Marking:

Bermad logo and flow arrow on body. Bermad logo, model and size on adhesive label on top casing.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

MUT7000

Approval Holder:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

‘JS’ range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.

Section:

1505 Water Meters

Size:

1 1/4” BSP (M) 1 ½” BSP (M) 2” BSP (M)

Marking:

Apator Powogaz and year of manufacture on dial face. Flow arrow cast on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Water meters JS6.3, JS10 and JS16 - DN25, DN32 and DN40

Approval Holder:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

General Email

przemyslaw.gretka@apator.com

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

General Email

przemyslaw.gretka@apator.com

View All Listings by this Company

Range of ultrasonic water meters with brass bodies and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1505 Water Meters

Size:

¾”BSP(M)

Marking:

Huizhong logo etched on face plate.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

SCL-61H-100-E DN15, DN20, DN25, DN32, DN40

Approval Holder:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company

Manufacturer:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company

Range of water meter chambers with plastic or DZR brass body manifold assemblies. The inlet incorporates a screw down isolation valve or quarter turn isolation valve (DZR brass model) & the chamber incorporates non-return valves (not suitable for back flow protection). Maximum working pressure 12.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

Please refer to model.

Marking:

GPS logo, part number, flow arrow, pressure and date of manufacture (DD/MM/YYYY) on adhesive label on body

Installation Requirements:

R001 R008

Expiry date:

30/09/2028

Model:

T25T25T – 25mm PE pushfit inlet X outlet P20P20P – 25mm PE pushfit inlet X outlet P25P25P – 20mm PE pushfit inlet X outlet HP25T25 – 25mm PE pushfit inlet X outlet HT25P25 – 25mm PE pushfit inlet X outlet HP20T25 – 20mm PE pushfit inlet X 25mm PE pushfit outlet HT25P20 – 25mm PE pushfit inlet X 20mm PE pushfit outlet C34M34M - 3/4" BSP (F) inlet X outlet

Approval Holder:

Aliaxis UK Ltd.

Company Name

Aliaxis UK Ltd.

Address

35 St Peter’s Road, Huntingdon

Postcode

PE29 7DA

Country

United Kingdom

Phone

01622852761

General Email

david.cousins@aliaxis.com

View All Listings by this Company

Range of circulating pumps with a bronze body, plastic impeller and EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2309343

Size:

1” BSP (M) or 1½” BSP (M).

Marking:

Rating plate on body including: Wilo, class, PN, model no. and date of production (YYWW).

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Z Range: Z15/6-* **130**, Z15/7-* **130**, Z20/2-* **130**, Z20/2-* **140**, Z20/5-* **140**, Z20/6-* **140**, Z20/7-* **140**, Z25/6-* **180**, Z25/7-* **180**. Where: 15/20/25 = connection size: 15 or 20 = 1” BSP (M), 25 = 1½” BSP (M). 2/5/6/7 = motor power (head in mWC). * = speed number: 1,2 or 3. 1st ** = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130/140/180 = Pump body dimension (height in mm). 2nd ** = terminal box position: 12,3,6 or 9 o’clock. Example code: Z25/6-3 PL 180 12.

Approval Holder:

WILO INTEC

Company Name

WILO INTEC

Address

50 Avenue Eugene Casella, Aubigny sur nere

Postcode

18700

Country

France

Phone

+332 48 81 62 62

General Email

franck.guillaume@wilo.com

View All Listings by this Company

‘SCALA1’ range of booster pumps with plastic bodies, plastic impellers, EPDM and NBR ‘O’-rings. The product incorporates a non-return valve. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2309919

Note:

Cold water use only.

Size:

1” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, model no., and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2028

Model:

SCALA1 3-25. SCALA1 3-35. SCALA1 3-45. SCALA1 5-25. SCALA1 5-35. SCALA1 5-55. Where 3 or 5 = flow rate in m³/h, 25-55 = max. head (m).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower handsets with (plastic bodies - various finishes, see models) incorporating a stainless-steel strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309016

Note:

Open outlet use only.

Size:

½” BSP (M) inlets

Marking:

Hansgrohe logo on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

26 807 xxx 26 807 670 Where xx0 denotes the surface finish it will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower outlets having plastic bodies, various finishes Maximum operating temperature 55°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309302

Note:

Open outlet use only

Size:

½” BSP.

Marking:

Mira on body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

1501943 – White shower handset, 1501856 – Chromium plated shower handset, 1499173 – Chromium plated overhead shower. Model added February 2024 1501981 - Chromium plated overhead shower

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower outlet with plastic bodies (chromium plated) and plastic flow regulators. Model 27.369 supplied with a PVC multi-layered shower hose with EPDM washer and plastic strainer on inlet. Maximum working temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309317

Note:

Open outlet use only. Claims of flow rate made by the manufacture on flow rate are not part of this approval.

Size:

½” BSP

Marking:

Grohe logo on handset.

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

27.369.xxx, 27.400.xxx. XXX indicate a different coloured finish, like following: 000 = chrome, A00 = Hard Graphite AL0 = Bushed Hard Graphite, BE0 = Polished Nickel, DA0 = Warm Sunset, DC0 = SuperSteel, DL0 = Brushed Warm Sunset, EN0 = Brushed Nickel, GL0 = Cool Sunrise, GN0 = Brushed Cool Sunrise.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Wall mounted shower heads and arms with chromium plated brass bodies. Maximum working temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309319

Note:

Open outlet

Size:

1/2” BSP (M).

Marking:

Grohe on faceplate.

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

Rainshower Cosmopolitan 310 - 26.056, incorporating: Rainshower Veris 310 - 27.477 & Rainshower - 28.361.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of ceiling mounted, shower outlets with chrome plated brass bodies, EPDM seals, stainless steel strainer and flow regulator in the inlets. Supplied with a flexible hose. Maximum working temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309322

Size:

Stainless steel braided PEX hose with ½” BSP captive nut end connection.

Marking:

Grohe on Body.

Installation Requirements:

R001 R009 R040

Expiry date:

30/09/2028

Model:

27.863 – RAINSHOWER ALLURE 230.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company