Range of pressure, flow and temperature sensors. The VFI sensors have stainless steel bodies, all other models have plastic bodied sensors. The MFS and VFS models are supplied with a plastic (composite) or stainless-steel flow pipe. The VFI models are supplied with a stainless-steel flow pipe. The products can also be supplied with a range of fittings/end connections (see model and size). Maximum working pressures: ITS, LPS, RPS, MFS (composite flow pipe) and VFS (composite flow pipe) models: 24.0 bar. CPS models (added February 2024): 24.0 bar. DPS: Models with vent hole: 16.0 bar. All other models: 24.0 bar. MFS (stainless steel flow pipe) and MFS (stainless steel flow pipe): 30.0 bar. VFI non-flanged models: 30.0 bar. VFI flanged models: 30.0 bar or as per flange PN rating 16.0 bar or 25.0 bar (whichever is lower). Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Size:

CPS/ITS/LPS/RPS: BRASS CW 617N: ¼" BSPP (M). S/S EN 14408: ½" BSPP (M) w/vent port. ½" BSPT (M). ½" BSPT (M) (short). ½" NPT (M). Plastic: ⅜" BSPP (M). DPS: BRASS CW 617N: ½" BSPT (M) w/vent hole. 15.5mm w/vent hole. S/S EN 1.4401: ½" BSPT (M) w/vent hole. ½" BSPP (M). Housing only S/S (EN 1.4408): 2x ⅛" NPT (F). End connections for housing only: AISI 316 6mm compression, 6mm and 8mm tube. MFS, VFS (COMPOSITE FLOWPIPE): FLOWPIPE ONLY: 1”, 1¼”, 1½” BSPP (M). END CONECTIONS: BRASS CW 617N: ½", ¾" BSPP (M). ¾", 1", 1¼" BSPT (M). ½", ¾", 1", 22mm, 28mm SWEAT. S/S EN 1.4401: ¾", 1", 1¼" NPT (M). 1", 1¼" BSPT (M). MFS, VFS (S/STEEL FLOWPIPE): FLOWPIPE ONLY (EN 1.4408): ¾", 1", 1¼" BSPP (M). ¾", 1", 1¼" NPSM (M). 1" FLANGE. END CONNECTIONS: BRASS CW 617N: ½", ¾", 1" BSPT (M). ¾", 1", 22mm & 28mm SWEAT. S/S EN 1.4401: ¾", 1" BSPT (M). ¾", 1" NPT (M). VFI: CAST IRON OR S/STEEL EN 1.4408 FLANGED: DN18/25/32 (1¼"). DN40/50 (2"). DN65/80/100. S/S EN 1.4401: 1”, 1¼" BSPT (M). 1, 1¼" NPT (M).

Marking:

VFI models: Grundfos and model type (VFI) on adhesive label on sensor. Grundfos on flow pipe. All other models: Grundfos on top of sensor housing. Model type (ITS/LPS/RPS/MFS/VFS) on adhesive label on sensor.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

Model: CPS, ITS, LPS or RPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF CPS, ITS, LPS or RPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII CPS model added February 2024. Fortron body material added June 2024. Product: [A] Must be CPS, ITS, LPS or RPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E or I, second and third character have no importance for drinking water* Materials: [G] Must be either -B, -S, -I, -D or -- Connection: [H] Must be either 03A, 03B, 03N, 02P, 01K, 16P, 66P or --- Packaging: [I] Of no importance for drinking water* ------ DPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF DPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII EPDM O-rings and EPDM anti-sedimentation sealing cap added June 2024 Product: [A] Must be DPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] All characters allowed except 4 and 5 Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E or I, the second must not be A. The third character has no importance for drinking water* character have no importance for drinking water* Materials: [G] Must be either -B, -S, S-, SS or -- Connection: [H] Must be either 06C, 06T, 08T, 01L, 24N, 63B, 64S or --- Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without composite flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either C-, CB, CS or -- Connection: [H] Must be either 03P, 03S, 04B, 04N, 04P, 04S, 05B, 05N, 05P, 05S, 07B, 07N, 07P, 09P, 01K, 15K, 18K, 22S, 26R, 28S or --- Note: 04N, 05N and 07N only in combination with CS [G] Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without stainless steel flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either QB, QS, Q- or -- Connection: [H] Must be either 03B, 04B, 04M, 04N, 04P, 04S, 05B, 05M, 05N, 05P, 05S, 07M, 07P, 01K, 01L, 102, 22S, 28S, 51G or --- Packaging: [I] Of no importance for drinking water* ------ VFI sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF VFI with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be VFI Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, second and third character have no importance for drinking water* Materials: [G] Must be either S-, SG, SS or -- Connection: [H] Must be either --F, --P, 05B, 05N, 07B, 07N, 07P, 09P, 30F, 31F, 32F, 33F, 35F, 37F or 42F Packaging: [I] Of no importance for drinking water* ------ Where: Code for sealing [F]: 1st character: “A” means EPDM O-rings and EPDM sealing sleeve. “E” means EPDM O-rings. “I” means EPDM O-rings and EPDM anti-sedimentation sealing cap Code for material [G]: 1st character: “C” means composite flow pipe. “Q” means flow insert and (except service sets) also a stainless steel flow pipe. “S” means stainless steel adapter (for DPS) or flow pipe. “-“ means no adapter (for DPS) or flow pipe. 2nd character: "B" means brass (fitting). “D” means Fortron (fitting) “G” means cast iron (flange). “I” means composite (fitting). "S" - means stainless steel (fitting or flange). “-“ means no further accessories included. Code for connection (H): 1st two characters: “01” means 10 mm. “02” means ¼”. “03” means ½”. “04” means ¾”. “05” means 1”. “06” means 6 mm. “07” means 1¼”. “08” means 8 mm. “09” means 1½”. (Internal note - this is on a flow pipe connection) “15” means 15 mm. “16” means ⅜”. “18” means 18 mm. “22” means 22 mm. “24” means ⅛”. “26” means 42 mm. “28” means 28 mm. “30” means DIN PN25/40 DN18/25/32, ANSI B16.5 Class 300 - 1¼". “31” means DIN PN16/25/40 DN40, ANSI B16.5 Class 300 - 2". “32” means DIN PN16/25/40 DN50, ANSI B16.5 Class 300 - 2". “33” means ISO/DIN PN25/40 DN65. “35” means ISO/DIN PN25/40 DN80. “37” means ISO/DIN PN16 DN100. “42” means ISO/DIN PN25/40 DN100. “51” means 1" / ¾". “63” means ½" and ventilation opening. “64” means 15.5 mm and ventilation opening. “66” means ½” and M8 ventilation port “--” means no accessories included and thus implicitly the dimension of the sensor connection, which for DPS, ITS, LPS, MFS, RPS and VFS is 10 mm (of no importance for drinking water). For VFI this is used for service sets, which includes the sensor and the bluff body, but not the flow pipe (of no importance for drinking water). 3rd character: “A” means BSPT (short). “B” means BSPT. “C” means Compression. “F” means flange. “K” means standard clip included (of no importance for drinking water). “L” means special clip included (of no importance for drinking water). “M” means NPSM. “N” means NPT. “P” means BSPP. “R” means union not (union nut included but no fittings included). “S” means sweat. “T” means hose connector. “2” means both standard clip and special clip included (of no importance for drinking water). “-“means no accessories included and thus implicitly the connection type of the sensor, which for DPS, ITS, LPS, MFS, RPS and VFS is a clip (of no importance for drinking water). Further details on the nomenclature: * All characters are allowed NOTE - For customer-specific numbers, GG/HHH/IIII in the saleable code is replaced by the customer name. However, the customer-specific products are still covered if they meet the requirements specified in the standard sales code.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Permanent filling devices for primary heating and chilled water closed circuits in domestic and non-domestic premises. The mains and closed circuit system pressures are continuously checked by two pressure sensors and their differential monitored by microprocessors. If the mains pressure is adequate and there is a drop in system pressure, then the two solenoid valves operate to allow water into the system via the transfer chamber. At all other times the normally open solenoid valve drains the transfer chamber to waste, via tundish (meeting the requirements of an air gap to drain), and allowing air to be admitted via an automatic air vent to create an atmospheric disconnection across the transfer chamber. Stainless steel strainer on the inlet supply. Mikrofill 3: Maximum working pressure 5.0 Bar. Cold water use only. Mikrofill 3 Pro (72846): Maximum working pressure 9.0 Bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2307805

Note:

Suitable for backflow protection up to fluid category 4. Water companies must be notified prior to installation.

Size:

15mm compression.

Marking:

Mikrofil 3 or Mikrofill 3 Pro, address, model, serial no, date of manufacture, max pressure on technical label.

Installation Requirements:

R001 R120 R415

Expiry date:

28/07/2028

Model:

Mikrofill 3. Model added June 2025: Mikrofill 3 Pro (72846).

Approval Holder:

Mikrofill Systems Ltd.

Company Name

Mikrofill Systems Ltd.

Address

11 Merse Road, Redditch

Postcode

B98 9HL

Country

Worcs.

Phone

+44 (0) 8452 606 020

General Email

info@mikrofill.com

View All Listings by this Company

Flow meter with stainless steel body. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1530 Miscellaneous Fittings

Size:

DN100 Flanged

Marking:

Pydro on body. Pydro, Model, Serial no, size and other technical information on data plate on body

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

PT-1 Multi Sensing Device

Product Images

Approval Holder:

PYDRO GMBH

Company Name

PYDRO GMBH

Address

FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company

Manufacturer:

PYDRO GMBH

Company Name

PYDRO GMBH

Address

FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company

Range of hose assemblies. Models B0301-148036-000 & B0301-148038-000 comprise of a spherical valve, stainless-steel braided EPDM lined flexible hose and double check valve assembly (suitable for backflow protection against fluid category 3). Model B0301-148037-000 comprises of a double check valve assembly (suitable for backflow protection against fluid category 3), stainless-steel braided EPDM lined flexible hose and ‘T’ type spherical valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2310028

Note:

If used as a filling loop assembly, an additional servicing valve is downstream of the flexible hose.

Size:

15mm compression inlet/outlet

Marking:

Fanski logo, WRAS and year of manufacture (YYYY) on hose ferrule. Flow arrow, Size and DR on check valve body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

B0301-148036-000 B0301-148037-000 B0301-148038-000

Product Images

Approval Holder:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Hydraulic circuit used to control the water path within the heating and sanitary boiler, with plastic body incorporating filter, flow regulator, plate heat exchanger and EPDM O-rings. Maximum working pressure 7.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

¾”BSP(M) x ½”BSP(M).

Marking:

Company logo on body (CHUNHUi)

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

FUSION ASTRO- Engineering Plastics Hydraulic Circuit.

Product Images

Approval Holder:

THE ELECTRIC HEATING COMPANY LTD

Company Name

THE ELECTRIC HEATING COMPANY LTD

Address

Block 5, Unit 40 Third Road Blantyre Ind Est GLASGOW

Postcode

G72 0UP

Country

United Kingdom

Phone

07986970466

General Email

chris@electric-heatingcompany.co.uk

View All Listings by this Company

Manufacturer:

Zhejiang Chunhui Intelligent Control Co Ltd

Company Name

Zhejiang Chunhui Intelligent Control Co Ltd

Address

No. 288 Chunhui Industrial Rd. Shangyu, Zhejiang

Country

China

General Email

View All Listings by this Company

Range of circulator pumps with brass bodies, plastic impellor, and EPDM ‘O’-rings and seals. The COMFORT 15-14 BX prefix models incorporate a screwdriver operated isolation valve on the inlet and a non-return valve at the outlet. These are housed within 1” BSP (M) x ½” BSP (M) adaptors. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304909

Size:

COMFORT 15-14 B prefix models: ½” BSP (F). COMFORT 15-14 BX prefix models: 1” BSP (M).

Marking:

Grundfos on body. Model on adhesive label on body. Flow arrow on the isolation valve.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

COMFORT 15-14 B PM GB, COMFORT 15-14 BX PM GB, COMFORT 15-14 BDT PM GB, COMFORT 15-14 BXDT PM GB, COMFORT 15-14 BA PM GB, COMFORT 15-14 BXA PM GB. Models added October 2024: COMFORT 15-14 B T GB, COMFORT 15-14 B GB, COMFORT 15-14 BX T GB, COMFORT 15-14 BX GB, COMFORT 15-14 B TDT GB, COMFORT 15-14 BX TDT GB, COMFORT 15-14 B TA GB, COMFORT 15-14 BX TA GB. Model keycode: Pump type: COMFORT, 15: Length 80mm, 14: Maximum head [14 dm], B: Brass pump, X: Fittings included (see product description), Blank = No fittings, Control mode, 1-4 characters. Blank: Basic (always on), T: Thermostat, DT: Digital timer, A: AutoAdapt. PM: Permanent magnet (Designation removed October 2024). GB: Sales region.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of multistage pumps (VL and CL series) and submersible pumps (VN, CN, ES and CS series) with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Maximum working pressure 15.0 bar (VL and CL series pumps only).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303041

Note:

VN, CN, ES and CS series submersible pumps: The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.

Size:

VL and CL series: 1 ¼” Female BSP inlet x 1 ½” Female BSP outlet. VN and CN series: 1 ¼” Female BSP outlet - 2" Female BSP outlet. ES and CS series: 1 ¼” Female BSP outlet.

Marking:

Franklin electric Srl logo, WRAS, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

VNx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CN/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, VLx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CL/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: VN, CN, VL, CL, ES, CS = Series name. VN/VL/ES series “E-TECH” brand CN/CL/CS Series “FPS” brand x1 = Nominal Flow: 3, 5, or 9. (9 is not available on ES and CS models) xx2 = number of impellers: 2 to 10 (VN/CN & VL/CL models), 2 to 8 (ES/CS models), depending on Nominal Flow and Frequency. I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply (no phase): T (three phase), M (single phase). x5 = Frequency (Hz): 5 (50 Hz), or 6 (60 Hz). x6 = Motor Configuration: L (Bi-phase, 90° single-phase), D (Three-phase, triangle), or Y (Three-phase, star). N = Mechanical seal elastomer: N = NBR. x7 = Mechanical Seal surface: 1 (Graphite / Silicon Carbide), or 2 (Silicon Carbide). x8 = Float Switch: 0 (without). B = Cable type: B (Blue). x9 = Cable size: A (4G1), B (4G1.5), C (3G1), or D (3G1.5). x10 = Cable length: O: 20m - VN/CN and ES/CS models, E: 5m - VL/CS models. x11 = Control Panel (not in contact with liquid): 0 (without), or 1 (connected - VN/CN models only). N = Nude terminal (not in contact with liquid). x12 = Option (only on VN/CN models) - Discharge head (”): Empty (1¼” Nickel plated brass), I (1¼” inox), or J (2” inox). D = Drinking water approved.

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of circulator pumps with stainless steel bodies and a plastic impeller. All models are available with a plastic (composite) rotor can, the MAGNA1 range is also available with a stainless-steel rotor can in the DN32 flanged, threaded 1½ & 2” sizes only. The MAGMA3 models have a differential pressure sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305910

Size:

Flanged: DN32, DN40, DN50, DN65. Threaded: 1 ½” & 2” BSP (M).

Marking:

Grundfos and Grundfos logo on motor housing. Grundfos Holdings A/S and address, type, model, Product No., Serial No., production date (YYWW), manufacturing country and other technical information on data plate on motor control box.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

MAGNA1 XX1-XX2 N XXX3, MAGNA1 XX1-XX2 F N XXX3, MAGNA3 XX1-XX2 N XXX3, MAGNA3 XX1-XX2 F N XXX3. Where: MAGNA1 = pump type (without sensor), MAGNA3 = pump type (with differential pressure sensor). XX1 = Nominal diameter (DN) of inlet/outlet ports (mm). XX2 = Max. head (dm). Blank or F = Blank - threaded, F - Flanged connection. N = Stainless steel pump housing. XXX3 = Port to port length (mm). Full model list below: MAGNA3 32-120 F N 220, MAGNA3 40-80 F N 220, MAGNA3 40-100 F N 220, MAGNA3 40-120 F N 250, MAGNA3 40-150 F N 250, MAGNA3 40-180 F N 250, MAGNA3 50-40 F N 240, MAGNA3 50-60 F N 240, MAGNA3 50-80 F N 240, MAGNA3 50-100 F N 280, MAGNA3 50-120 F N 280, MAGNA3 50-150 F N 280, MAGNA3 50-180 F N 280, MAGNA3 65-40 F N 340, MAGNA3 65-60 F N 340, MAGNA3 65-80 F N 340, MAGNA3 65-100 F N 340, MAGNA3 65-120 F N 340, MAGNA3 65-150 F N 340, MAGNA1 25-40 N 180, MAGNA1 25-60 N 180, MAGNA1 25-80 N 180, MAGNA1 25-100 N 180, MAGNA1 25-120 N 180, MAGNA1 32-40 N 180, MAGNA1 32-60 N 180, MAGNA1 32-80 N 180, MAGNA1 32-100 N 180, MAGNA1 32-40 F N 220, MAGNA1 32-60 F N 220, MAGNA1 32-80 F N 220, MAGNA1 32-100 F N 220, MAGNA1 32-120 F N 220, MAGNA1 40-40 F N 220, MAGNA1 40-60 F N 220, MAGNA1 40-80 F N 220, MAGNA1 40-100 F N 220, MAGNA1 40-120 F N 250, MAGNA1 40-150 F N 250, MAGNA1 40-180 F N 250, MAGNA1 50-40 F N 240, MAGNA1 50-60 F N 240, MAGNA1 50-80 F N 240, MAGNA1 50-100 F N 280, MAGNA1 50-120 F N 280, MAGNA1 50-150 F N 280, MAGNA1 50-180 F N 280, MAGNA1 65-40 F N 340, MAGNA1 65-60 F N 340, MAGNA1 65-80 F N 340, MAGNA1 65-100 F N 340, MAGNA1 65-120 F N 340, MAGNA1 65-150 F N 340, MAGNA3 25-40 N 180, MAGNA3 25-60 N 180, MAGNA3 25-80 N 180, MAGNA3 25-100 N 180, MAGNA3 25-120 N 180, MAGNA3 32-40 N 180, MAGNA3 32-60 N 180, MAGNA3 32-80 N 180, MAGNA3 32-100 N 180, MAGNA3 32-40 F N 220, MAGNA3 32-60 F N 220, MAGNA3 32-80 F N 220, MAGNA3 32-100 F N 220, MAGNA3 40-40 F N 220, MAGNA3 40-60 F N 220, MAGNA1 32-120 N 180, MAGNA3 32-120 N 180.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310916

Size:

CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.

Marking:

Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2028

Model:

Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of overhead shower outlets with brass or stainless-steel bodies (various finishes - see model), with NBR ‘O’-rings. The inlet incorporates a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306032

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

Heshan LODI Sanitary Ware Industry on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

LDAE0812X (8*12” oval stainless steel shower head), LDAR0801X (8” circle stainless steel shower head), LDAR1001X (10” circle stainless steel shower head), LDAR1201X (12” circle stainless steel shower head), LDAR1601X (16” circle stainless steel shower head), LDAS0801X (8” square stainless steel shower head), LDAS0812X (8*12” square stainless steel shower head), LDAS1001X (10” square stainless steel shower head), LDAS1016X (10*16” square stainless steel shower head), LDAS1201X (12” square stainless steel shower head), LDAS1601X (16” square stainless steel shower head), LDBR0801X (8” circle brass shower head), LDBR0901X (9” circle brass shower head), LDBR1001X (10” circle brass shower head), LDBR1201X (12” circle brass shower head), LDBS0801X (8” square brass shower head), LDBS1001X (10” square brass shower head), LDBS1201X (12” square brass shower head), LDDE0812X (8*12” oval stainless steel shower head), LDDR0801X (8” circle stainless steel shower head), LDDR1001X (10” circle stainless steel shower head), LDDR1201X (12” circle stainless steel shower head), LDDR1601X (16” circle stainless steel shower head), LDDS0801X (8” square stainless steel shower head), LDDS0812X (8*12” square stainless steel shower head), LDDS1001X (10” square stainless steel shower head), LDDS1016X (10*16” square stainless steel shower head), LDDS1201X (12” square stainless steel shower head), LDDS1601X (16” square stainless steel shower head). Where X denotes finish and can be replaced by: CP = Chrome, BB = Brushed gold, BL = Matt black, BGN = Brushed black, WH = Matt white, SS = Sandmark.

Product Images

Approval Holder:

Heshan LODI Sanitary Ware Industry Co., LTD

Company Name

Heshan LODI Sanitary Ware Industry Co., LTD

Address

No. 6 Dongshun Road, Area A, Dongxi Development Zhishan Town, Heshan City

View All Listings by this Company

Manufacturer:

Heshan LODI Sanitary Ware Industry Co., LTD

Company Name

Heshan LODI Sanitary Ware Industry Co., LTD

Address

No. 6 Dongshun Road, Area A, Dongxi Development Zhishan Town, Heshan City

View All Listings by this Company

Wall mounted and ceiling mounted shower arms (chromium plated brass).

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306066

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Bonomi on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

302132/49A - Wall Mounted Arm, 112232/19A - Ceiling Mounted Arm.

Product Images

Approval Holder:

Idrosanitaria Bonomi SpA

Company Name

Idrosanitaria Bonomi SpA

Address

Via Monsuello, 36 Lumezzane S.S Brescia

Postcode

25065

Country

Italy

Phone

+39 030 8922111

General Email

massimoplati@idrobonomi.com

View All Listings by this Company

Manufacturer:

Idrosanitaria Bonomi SpA

Company Name

Idrosanitaria Bonomi SpA

Address

Via Monsuello, 36 Lumezzane S.S Brescia

Postcode

25065

Country

Italy

Phone

+39 030 8922111

General Email

massimoplati@idrobonomi.com

View All Listings by this Company

Range of wall and ceiling mounted shower arms with (brass bodies - various styles and finishes). Maximum operating temperature 60°C. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306330

Size:

½” BSP (M)

Marking:

THG on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

82/W, 82V/W (ceiling mounted), 84/W, 84BC/W, 84C/W, 84L/W, 85/W Style: A04 Broadway à manettes, A1J Amboise Malachite, A1K Amboise Lapis Lazuli, A1L Amboise Jaspe rouge, A1M Amboise Onyx noir, A1S Cheverny Malachite, A1T Cheverny Lapis Lazuli, A1U Cheverny Jaspe rouge, A1V Sully Malachite, A1W Sully Lapis Lazuli, A1X Sully Jaspe rouge, A2A Métropolis cristal clair, A2B Métropolis cristal clair à manettes, A2C Océania, A2E Venice, A2F Naïade, A2G Ange, A2H Panthère cristal clair, A2I Perle, A2J Papillon, A2K Panthère cristal noir, A2L Métropolis cristal noir, A2M Métropolis cristal noir à manettes, A2N Mossi cristal clair, A2R Masque de Femme lunaire, A2S Masque de Femme solaire, A2T Masque de Femme métal grave, A2U Masque de Femme, métal lisse, A33 Bambou cristal noir, A34 Bambou cristal Ambre, A35 Bambou cristal clair, A38 Niagara, A3T Amboise Marbre à définir, A3V Cheverny Marbre à définir, A41 Dahlia, A42 Pomme cristal clair satiné, A44 Ellipse, A46 Pomme cristal lustré, A4J Hirondelles, A4K Hirondelles tamponnées platine, A4L Hirondelles tamponnées, A52 Broadway, A54 Art Déco, A55 Art Déco à manettes, A56 Art Déco Cristal, A57 Tradition, A58 Tradition à manettes, A59 Tradition Cristal, A60 Marina Onyx noir, A61 Marina metal, A6A Profil metal, A6B Profil métal à manettes, A6G Profil Lalique cristal clair, A6H Profil Lalique cristal clair à manettes, A6N Profil Onyx noir, A6P Profil Onyx noir à manettes, A7A Ithaque décor, A7B Ithaque décor Platine, A7D Capucine mauve décor, A7E Capucine vert décor Platine, A7F Marquise noir décor, A7G Marquise blanc décor Platine, A8M Vogue Malachite, A8N Vogue Jaspe rouge, A8P Vogue Onyx noir, A8R Vogue Oeil de tigre, A8S Vogue Lapis Lazuli, A9B Jaipur cristal satiné, A9C Jaipur Onyx noir, A9F Jaipur metal. E53 Najem. G04 Pure, G08 Pompadour, G13 Rochambeau, G14 Versailles, G1T Beluga, G1U Beluga à manettes, G24 Amour de Trianon, G25 1900, G28 1900 à manettes, G29 Charleston, G2H Le 9 Howlite, G2I Le 9 Nero Marquina, G2J Faubourg porcelaine blanche à manettes, G2K Faubourg porcelaine blanche, G2L Faubourg porcelaine noire, G2M Faubourg porcelaine noire à manettes, G2N Froufrou, G2P Froufrou à manettes, G2R Frivole, G2S Frivole à manettes, G2T Faubourg metal, G2U Faubourg métal à manettes, G31 Cygne, G3M 1900 à manettes métal lisse, G3N Charleston à manettes métal lisse, G3R Montaigne marbre Grand Antique, G3S Montaigne marbre Grand Antique à manettes, G3T Montaigne marbre Leonardo Grey, G3U Montaigne marbre Leonardo Grey à manettes, G3V Montaigne marbre blanc Vénus, G3W Montaigne marbre blanc Vénus à manettes, G47 Vendôme, G4P Collection "O", G4R Hamptons, G4S Hamptons à manettes, G58 Spirit à manettes, G5A Nano, G5B Nano à manettes, G5D Anoa, G5E Soho, G69 Spirit, G6A Métamorphose, G6B Métamorphose à manettes, G6C M tamorphose carbone, G6D Métamorphose céramique noire, G6E Métamorphose céramique blanche, G6F Métamorphose à manettes coloris spécifique, G75 Charleston à manettes, G79 Cubica, G7A Beaubourg, G7B Beaubourg à manettes, G7C Saint-Germain, G7D Saint-Germain à manettes, G7E Dean, G7F Bondi, G7G Bondi à manettes, G7H Club Saint-Germain, G7J Club Saint-Germain à manettes, G8A Les Ondes, G8B Les Ondes à manettes, G9A SYSTEM métal lisse, G9B SYSTEM métal lisse à manettes, G9C SYSTEM métal diamant, G9D SYSTEM métal diamant à manettes, G9E SYSTEM métal quadrille, G9F SYSTEM métal quadrillé à manettes, G9G SYSTEM Howlite, G9H SYSTEM Howlite à manettes, G9J SYSTEM cristal, G9K SYSTEM cristal à manettes, G9L SYSTEM croisillon bague à définir, G9M SYSTEM manette bague à définir. J17 Beverley. O01 LUXURY COLLECTION, O02 MASTER COLLECTION. U1A Mandarine metal, U1D Mandarine cristal clair, U1E Mandarine cristal clair satiné, U1K Mandarine Cristallia Diamant, U1S Sully Onyx blanc, U1T Sully Onyx noir, U1V Cheverny Onyx noir, U2A Le 11, U2B Le 11 à manettes, U2D INFINI porcelaine blanche, U2E INFINI porcelaine blanche décor platine, U2F INFINI porcelaine blanche décor, U2L Nihal porcelaine bleue, U2M Nihal métal lisse, U2N Nihal porcelaine ivoire, U2P Nihal porcelaine noire, U2R Nihal porcelaine verte, U3J Estrela, U3K Estrela à manettes, U3L Estrela - insert metal, U4A Diplomate bagues lisses, U4B Diplomate bagues annelées, U4C Diplomate bagues torsadées, U4D Diplomate Royale, U4E Duomo, U4F Duomo cristal, U5A Flore, U5B Island, U5C Paradise, U5D Sun Dragon, U5E Ginkgo, U5F Vegetal, U5G Moon Dragon, U5H Jade Dragon, U5J Rose, U6A Pétale de Cristal clair, U6B Pétale de Cristal bleu, U6C Pétale de Cristal rouge, U6D Pétale de Cristal noir, U6E Pétale de Cristal clair liseré doré, U6F Beyond Crystal - cristal clair, U6G Beyond Crystal - cristal aqua, U6H Beyond Crystal - cristal rouge, U6J Beyond Crystal - cristal couleur champagne, U6K Beyond Crystal - cristal bleu, U7A Trocadéro Malachite, U7B Trocadéro Lapis Lazuli, U7C Trocadéro Jaspe Rouge, U7D Trocadéro Onyx noir, U7E Trocadéro Oeil de Tigre, U7G Icon-X, U7H Icon-X à manettes, U7J Icon-X - insert metal, U7K Icon-X à manettes - insert metal, U7L Icon-X – Titane, U7M Icon-X à manettes – Titane, U7S Icon-X – Carbone, U7T Icon-X à manettes- Carbone, U8A Wedding, U8B Monte Carlo porcelaine, U8C Monte Carlo porcelaine or blanc, U8D Corvair, U8E Corvair à manettes, U8F Corvair Howlite, U8G Corvair Howlite à manettes, U8H Corvair Portoro, U8J Corvair à manettes Portoro, U8K Corvair Fior di Bosco, U8L Corvair à manettes Fior di Bosco, U93 Malmaison metal, U94 Malmaison cristal, U95 Malmaison Portoro, U97 Malmaison Howlite, U9A West Coast croisillon metal, U9B West Coast manette metal, U9C West Coast croisillon guilloché lin, U9D West Coast manette guilloché lin, U9E West Coast croisillon onyx noir, U9F West Coast manette onyx noir, U9G West Coast croisillon onyx blanc, U9H West Coast manette onyx blanc, U9I West Coast manette - insert à définir, U9J West Coast croisillons - insert à définir, U9K Grand Central croisillon metal, U9L Grand Central manette metal, U9M Grand Central croisillon onyx noir, U9N Grand Central manette onyx noir, U9P Grand Central manette - insert à définir, U9Q Grand Central croisillon - insert à définir, U9R Grand Central croisillon onyx blanc, U9S Grand Central manette onyx blanc.

New Styles added November 2024: A8L - Vogue marbre à définir G6G - New Spirit G6H - New Spirit à manettes G7K - Soho 2023 G7L - SOHO METAL (nouveau design) G7R - Yoko G7S - Yoko Color G7T - Yoko Ice G7U - Yoko Howlite G7V - Yoko Delta G7W - Yoko Delta Howlite U2K - So U4J - ZOOM.5 U4K - ZOOM.7 U4L - ZOOM.12 U5K - Camélia Cristal noir U5L - Camélia Cristal clair U5N - New Island U5P - New Paradise U6M - Mille nuits Cristal clair U6N - Mille nuits Cristal couleur Champagne U6P - Mille nuits - cristal brume XA2 - Peter/One Hype Park XA5 - Plaza XB7 - Charleston – Spirit XC1 - XC1 A3Z - Marina Marbre à définir Finishes: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD. Complete model number compiles of a three digit code from each section above, for example A04 82/W A01.

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Drain cock with a plastic body. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 75°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2303042

Size:

M15 thread x 20mm manifold connection

Marking:

YJS and date of manufacture (YMMDD) on body

Installation Requirements:

R001 R511

Expiry date:

31/03/2028

Model:

BT50L169 (H03)

Product Images

Approval Holder:

Mitsubishi Electric Air Conditioning Systems Europe Ltd.

Company Name

Mitsubishi Electric Air Conditioning Systems Europe Ltd.

Address

Nettlehill Road, Houston Industrial Estate, Livingston, Scotland

Postcode

EH54 5EQ

Phone

01506 - 44 55 00

General Email

mark.fletcher@m-ace.mee.com

View All Listings by this Company

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304076

Size:

See Models

Marking:

IDC E Mark (~E~ inside a circle), CR and size on body (DZR Brass Models) IDC E Mark (~E~ inside a circle) and size on body (Brass Models)

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

DZR Brass Models: 1DCAa001 (15mm Spigot) 1DCAa001L (15mm Spigot) 1DCAa101 (1/2” BSP (M)) 1DCAa102 (3/4” BSP (M)) Brass Models (can be chrome plated or not): 1DCA001 (15mm Spigot) 1DCA001L (15mm Spigot) 1DCA001LNP (15mm Spigot) 1DCA101 (1/2” BSP (M)) 1DCA102 (3/4” BSP (M))

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304085

Size:

See Models

Marking:

Albion logo, size & CR on body (DZR Brass Models) Albion logo & size on body (Brass Models)

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

DZR Brass Models: ART 514 & ART 515 (15mm Spigot) ART 510 1/2” (1/2” BSP (M)) ART 510 3/4" (3/4” BSP (M)) Brass Models (can be chrome plated or not): ART 14 (15mm Spigot) ART 15 (15mm Spigot) ART 15C (15mm Spigot) ART 10 (1/2” BSP (M)) ART 10 (3/4” BSP (M))

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304090

Size:

See Models

Marking:

Brymec Logo, WRAS, Flow arrow and size on body.

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

Brass Models (can be chrome plated or not): 30298: 15mm Drain off cock long spigot (15mm Spigot) 31150: 15mm Drain off cock (15mm Spigot) 31151: ½" Threaded drain off cock (15mm Spigot) 31149: ¾" Threaded drain off cock (3/4” BSP (M))

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304088

Size:

See Models

Marking:

BOSS, CR and size on body (DZR Brass Models) BOSS and size on body (Brass Models)

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

DZR Brass Models: 27200107 - Drain Cock DZR Type A Long Tail (15mm Spigot) Brass Models (can be chrome plated or not): 27200118 - FIG 372CP Chrome Plated Drain Off Cock (15mm Spigot)

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of drain taps with a brass body and rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2307350

Size:

SEE MODEL.

Marking:

Altecnic logo and date of manufacture (XX) on body.

Installation Requirements:

R001 R511

Expiry date:

31/07/2028

Model:

BI-WM0004: 15mm push fit extended tail, Type A. BI-WM0005: 15mm plain tail, Type A. BI-WM0006: ½” BSP (M), Type A. BI-WM0007: ¾” BSP (M), Type A.

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of nylon braided hoses with TPSiV inner liner and brass end connections incorporating EPDM washers.Open outlet use only.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2310006

Size:

½” BSP captive nut.

Marking:

Axor or Hansgrohe on conical nut.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

28 220 xx0: Hansgrohe Designflex, Textile shower hose 125 cm, 28 227 xx0: AXOR Shower Solutions, Textile shower hose 1.25 m with conical and cylindrical nut, 28 228 xx0: AXOR Shower Solutions, Textile shower hose 1.25 m with cylindrical nuts, 28 230 xx0: Hansgrohe Designflex, Textile shower hose 200 cm, 28 259 xx0: AXOR Shower Solutions, Textile shower hose 1,60 m with conical and cylindrical nut, 28 260 xx0: Hansgrohe Design flex, Textile shower hose 160 cm, 28 261 xx0: AXOR Shower Solutions Textile shower hose. 1.60 m with cylindrical nuts, 28 290 xx0: AXOR Shower Solutions Textile shower hose. 2 m with conical and cylindrical nut, 28 291 xx0: AXOR Shower Solutions Textile shower hose 2 m with cylindrical nuts. Models added April 2024: 28 221 xx0: Hansgrohe Designflex, Textile shower hose 125 cm, 28 250 xx0: Hansgrohe Design flex, Textile shower hose 160 cm. 28 240 xx0 - Hansgrohe Designflex - 175 cm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of brass end connections (see models). “DN 9.5 ½” compression with ISO valve” model also incorporates a screwdriver operated isolation valve. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303014

Size:

DN9: ½” BSP (F) Captive nut, M10x1, ½” Compression, ½” BSP (M) or M12x1. DN9.5: ½” BSP (F) Captive nut, ½” BSP (F) Captive Nut with ISO valve M10x1, ½” Compression with ISO valve, ½” BSP (M) or M12x1. DN12.5: ½” BSP (F) Captive nut, 3/4” BSP (F) Captive nut, ½” Compression, ¾” Compression, ½” BSP (M) or ¾” BSP (M).

Marking:

Ivanci logo (trademark of Zhejiang Fansheng Fluid Control Co., LTD), WRAS & date of manufacture (MMYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

RCC.L

Product Images

Approval Holder:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Country

China

View All Listings by this Company