'Khat Al-Naqaa HDPE pipes'. Black coloured, extruded HDPE pipes. For use with water up to 65°C.
'RTPE100HP' (black coloured with blue stripe) & 'RTPE100LP' (blue coloured) Pipes. Black or blue coloured, extruded HDPE pipes. For use with water up to 60°C.
'RTPE100HF' (black coloured) & 'RTPE100LF' (blue coloured) Fittings. Black or blue coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'CHINAUST F1 HDPE Pipes'. Black coloured (with blue stripes), extruded HDPE pipes. For use with water up to 65°C.
'CHINAUST F1 HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 65°C.
'ApiEco® PP-R Pipes'. Green coloured, extruded PP-R pipe. For use with water up to 65°C.
'ApiMidAlu® PP-R Pipes'. Extruded, multi-layered pipe comprising of a green coloured, PP-R inner layer, Aluminium middle later and black coloured (with grey stripe), PP-R outer layer. For use with water up to 65°C.
'Smart S-IRE'. Site applied, light pink coloured, two-part (resin & hardener is automatically mixed in a 3:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 17/0187’, dated ‘29/11/2023’. For use with water up to 65°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 16/0884’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.
'KB60-E'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.2mm. For use with water up to 23°C.
'01/T60FKM 'O' rings and gaskets' – for use with water up to 23°C. 01/T70FKM & 01/T80FKM 'O' rings and gaskets' – for use with water up to 85°C. Green coloured, injection moulded FKM 'O' rings and gaskets. Shore hardness between 60 & 80. In-radius size between 0.5mm & 3.5mm.
'Bakelite PF 7595' & 'Bakelite PF 6510'. Black coloured, injection moulded PF materials. For use with water up to 70°C.
Side entry BS1212-4 (2016) compact type float operated valve with delayed action for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 Bar Cold water use only.
Range of bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns, delayed fill with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use only
Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member that also incorporates a manual override button. The assembly incorporates a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3) The spout outlet incorporates a plastic flow straightener. The inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S010* | Various | 1/2" BSP (M) | 10 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, Fixed Head, Riser Rail, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Range of floor mounted, single hole, single outlet, swivel combination tap assemblies, chrome plated brass body, incorporating a ceramic cartridge headwork with a single lever operating member and incorporating a self-cancelling diverter to a shower outlet with a type HC backflow protection device (verified by test – Suitable for backflow protection against fluid category 3) The spout outlet incorporates a plastic aerator, and the product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F9009K-** | Various | BSP 3/4" (M) | 10 bar | 85 °C | LAN BIAO | Spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | Interconnecting Hoses, |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H23B1 | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No | ||||
| H23GF | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) conical nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F2300120012060 | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) nut | Open outlet use only bar | 85 °C | Justlink WRAS 2025 | Nut | No | Open Outlet |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S009* | Various | 1/2" BSP (M) | 10 bar | 65 °C | WINSDRUM | On body | No | Rotary Cartridge headwork | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, Riser Rail, |
| S011* | Various | 3/4" BSP (F) | 10 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Range of flow restrictors with brass bodies. Maximum working pressure: 6.5 Bar. Maximum operating temperature: 85.0°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KL-35DS | natural | 35mm | 10 bar | 85 °C | Manufacturer’s logo, WRAS and YYYY/DD/MM | on body | No | Ceramic cartridge | |||
| KL-40DS | natural | 40mm | 10 bar | 85 °C | Manufacturer’s logo, WRAS and YYYY/DD/MM | on body | No | Ceramic cartridge |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T8015 - 06 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8015 - 06 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8108 - 14 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8108 - 14 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037 - 05 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037 - 05 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81011 - 02 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81011 - 02 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81073 - 02 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81073 - 02 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001D - 03 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001D - 03 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037A - 01 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037A - 01 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81022 - 04 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81022 - 04 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81071 - 02 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81071 - 02 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8001B - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8001B - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8231 - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8231 - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T80501 - 05 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T80501 - 05 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8231 - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8231 - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001B - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001B - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 27HW | 27mm | 10 bar | 65 °C | Yizhan logo | Body | No | |||||
| 27HWX | 27mm | 10 bar | 65 °C | Yizhan logo | Body | No | |||||
| 32HW-LJ | 32mm | 10 bar | 65 °C | Yizhan logo | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| K011* | Various | 1/2" Captive nut | 5 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | C-plate | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| K001* | Various | 1/2" Captive nut | 5 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | Not Applicable | Aerator | |
| K002* | Various | 1/2" Captive nut | 5 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | Not Applicable | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P10000921 | Chrome plated | ⅜" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator | |
| P10000923 | Chrome plated | ½" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator | |
| DS01-B-3/8 | Matt black | ⅜" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator | |
| DS01-B-1/2 | Matt black | ½" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5301* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disk | C-plate | Aerator | |
| 5301H* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disk | C-plate | Aerator |
* denotes finish and can be replaced by: C - Chrome, RG - Rose Gold, BTG - Brushed Titanium gold, BZG - Brushed Zirconium gold, BRG - Brushed Rose gold, MW - Matte white, BS - Brushed stainless, BN - Brushed nickel, PN - Polished nickel, GM - Gunmetal, B - Matte black, TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VAL2 BAS FL4.5 C CD | Chrome | ½” BSP (M) | 5 bar | 65 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | C-plate | Aerator | Pop Up | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61402 | Chrome plated | 1/2'' BSP (F) | 10 bar | 60 °C | Bokeya | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener | |
| 61102 | Chrome plated | 1/2'' BSP (F) | 10 bar | 60 °C | Bokeya | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener |
Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating either a ceramic cartridge headwork or ceramic disc headworks with various operating members (see model). The spout outlet of some models incorporates a plastic aerator (specific models only - see model). Maximum working pressure 5.0 bar. Maximum temperature 65°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MA3590 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3590P | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3591 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3591PC | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3592 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3594 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3594P | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3594PC | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate |
Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Model B3306AA & B1148AA are supplied with a lever type operated pop-up waste – not verified by test. Products are supplied with 3/8” x 15mm Compression adaptors for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes) incorporating quarter turn ceramic disc headworks with hand wheel operating members (ZA1145SG model) or a ceramic cartridge headwork with a single lever operating member (all other models). The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
A range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. The products are supplied with a loose brass ½” BSP (M) x ½” BSP (F) adaptor for installation on the cold inlet. This adaptor incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
Single hole, single outlet (swivel) combination tap assemblies with brass bodies, various finishes, incorporating quarter turn ceramic disk headworks with a single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DL1600 | Various | ½" BSP (F) | 10 bar | 65 °C | LUSSO | On wall plate | No | 1/4 Turn ceramic disk | Not Applicable | Aerator | |
| DL16011-1 | Various | ½" BSP (F) | 10 bar | 65 °C | LUSSO | On water outlet | No | 1/4 Turn ceramic disk | Not Applicable | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 517720 - DARAS TP HP CHR MIXER TAP 3/8" | Chrome (CHR) | 3/8" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | |
| 523286 - DARAS TP HP CHR MIXER TAP | Chrome (CHR) | 1/2" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | |
| 526360 - DARAS TP HP 3L CHR MIXER TAP | Chrome (CHR) | 1/2" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| 526361 - DARAS TP HP 6L CHR MIXER TAP | Chrome (CHR) | 1/2" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61409 | Chrome plated | 1/2" BSP (F) | 10 bar | 85 °C | Bokeya | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener | |
| 61109 | Chrome plated | 1/2" BSP (F) | 10 bar | 85 °C | Bokeya | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener |
Range of single hole, single outlet (swivel) combination taps assemblies (chromium plated brass), incorporating a non-rising spindle headwork and dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2118-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | Ceramic cartridge | Metal Backnuts |
XX represent different finishes and can be replaced by CR =Chrome, MB=Matte black, BB=Brushed brass,BN=Brushed nickel,GM=Gun Metal.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TPASHBAFILL3 | Chromed | BSP 3/4" (M) | 10 bar | 65 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies, (brass bodies, various finishes - see model), incorporating a ceramic cartridge headworks with either a single lever operating member, supplied with Stainless steel braided PEX lined flexible hose assemblies. In some models the spout outlet incorporates a plastic aerator (see model). Maximum working pressure 10.0 bar. Maximum temperature 65°C.
Non-metallic materials and components comply with BS6920 at 65°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61405 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 61105 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 51505 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Range of wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork, with cubed/lever type operating members, diverting between the spout outlet and a shower outlet. The temperature is controlled independently via a thermostatic cartridge with a manual override button and cubed/lever type operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S006* | Various | 3/4”x1/2” offset unions | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
| S007* | Various | captive nut G1/2" | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| N BSM C CD | Chrome (Cr6) | 3/4" BSP (M) | 5.0 bar | 65 °C | Bristan | Indice | No | 1/4 Turn ceramic disc | Metal Backnuts | Open Outlet | Shower Hose, Handset, |
| RP3 N BSM C CD | Chrome (Cr3) | 3/4" BSP (M) | 5.0 bar | 65 °C | Bristan | Indice | No | 1/4 Turn ceramic disc | Metal Backnuts | Open Outlet | Shower Hose, Handset, |
Wall mounted, two hole, single outlet (swivel) combination tap assembly incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QST DSM C | Chrome (Cr6) | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Plinth | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| RP3 QST DSM C | Chrome (Cr3) | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Plinth | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
Page 173 of 177
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
