Range of thermostatic blending valves with brass bodies (various finishes, see models), incorporating a thermostatic cartridge that controls the temperature. Supplied with either lever or cross top operating members depending on model. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 85ºC.
Range of wall mounted concealed shower mixer (brass body) incorporating a 3-way manual diverter valve controlling and diverting the flow with a dome type or single lever operating member (see model). The temperature is controlled independently via a thermostatic cartridge with a dome type or single lever operating member (see model) incorporating a manual override button. Both inlets and the shower outlet connection incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic blending valve (brass body), incorporating a half turn ceramic disc headwork controlling the flow with a dome type (Rakama) or single lever (Rakita) operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type (Rakama) or single lever (Rakita) operating member incorporating a manual override button. The inlets incorporate approved check valve cartridges. However, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies (various finishes, operating members and trim kits - SD127 prefix models are available in the following finishes - Chrome (CR), Brushed Black (BBR), Brushed Black, Matt Black (MB). All other models are available in Chrome (CR) finish). The 2500 model variants incorporate a ¼ turn ceramic disc headwork controlling the flow to a single outlet. The 2501 model variants incorporate a 2 way ceramic disc diverter (2 on, 1 off) controlling the flow between two outlets. The 2503 model variants incorporate two ¼ turn ceramic disc headworks controlling the flow to two separate outlets. The 2504 model variants incorporate a 2 way ceramic disc diverter (2 on, 1 off) controlling the flow between two outlets and an additional a ¼ turn ceramic disc headwork controlling the flow to a separate single outlet. In all models the temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed 2 and 3 outlet thermostatic mixers with brass bodies and thermostatic cartridge controlling the temperature. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of float operated valves incorporating stainless steel bodies and float arms. Maximum working pressure 10.0 bar. Cold water use only.
Flow control valve with a cylindrical brass body, stainless steel spring and thermostatic element. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of spring loaded, resilient trim, non-return valves with brass bodies. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
In-line manually adjustable pressure reducing valves with a DZR brass body, piston and stem. Product is supplied with guages Maximum inlet pressure 20.0 bar. Outlet pressure range 1.0 to 6.0 bar. Maximum operating temperature 100°C.
Pressure relief valve (pre-set at 3.0 bar) with a brass body. The valve incorporates a manually operated easing gear. Maximum operating temperature 110°C.
Range of normally closed (monostable) and pulse controlled/latching (bistable) solenoid valves with plastic bodies, integral stainless steel strainer, From September 2023 the 50.005.101 model can also be supplied with an integral plastic strainer. EPDM diaphragm, EPDM ‘O’-rings and seals. To be installed in specifically dimensioned bodies. The 50.005.101 model can be supplied with or without a brass adaptor. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of lever and butterfly handle spherical valves with chrome plated brass bodies, chrome plated brass ball and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.
Range of lever operated servicing valves for use with BS EN 1057 R250 half hard copper tube, incorporating brushed chromium plated DZR brass bodies and ball, and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of brass bodied or chrome plated brass bodied spherical valves, with a brass ball and EPDM ‘O’-rings. All fittings are to be used with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Electrically actuated 3 way diverting valve incorporating brass bodies with NBR ‘O’-rings and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves incorporating brass bodies (various finishes) with EPDM ‘O’-rings or PTFE seats depending on model variant. Models can be straight or angled. Maximum working pressure 25.0 bar (models 10.61092.015.CP5R-8510 & 10.61092.015.CP12-8510). Maximum working pressure 16.0 bar (all other models). Maximum operating temperature 85°C.
Range of spherical valves incorporating UPVC or ABS bodies and EPDM seats. Maximum working pressure of sizes 3/8" - 2" and 16mm - 63mm is 16.0 bar. Maximum working pressure of sizes 2½" - 4" and 75mm - 110mm is 10.0 bar. Cold water use ony.
Range of ball valves incorporating brass bodies, stems & balls, PTFE seats and butterfly type or single lever operating members. Maximum working pressure 40.0 bar. Maximum operating temperature 95˚C.
Range of lever operated servicing valves for use with BS EN 1057 R250 half hard copper tube, incorporating brushed chromium plated DZR brass bodies and ball, and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line isolation valves with a nickel plated brass (11-1046 (1046) range) or DZR brass body (all other models), chromium plated DZR brass ball (1601 (¼ ” to 2”), 2045 (¼” to 2”) & 1046 ranges), SS304 ball (1601 (¾” to 2”) & 2045 (¼” to 2”) ranges) or chromium plated brass ball, and PTFE seats. The products are supplied with either a single lever (1601, 2045 & 1046 range), single lever with extension stem kit, (1601 & 2045 range), single lever with lockable handle (1601 & 2045 range), butterfly operating members (1601 & 2045 range), T-handle, short black lever (1601 & 2045 range) or screwdriver operated (1046 range). The 11-1015 (2045) range and 11-1046(1046) range is for use with copper pipe manufactured to EN1057. Maximum working pressure 40.0 bar (1601 range), 25.0 bar (2045 & 1046 range). Maximum operating temperature 85°C.
Page 16 of 561
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
