PPI Xiamen Industry Co Ltd Approvals


WRAS Approval Number: 1609042

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The product is supplied with a pop- up waste, but can also be supplied with a coin type or click type waste. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609042
  • Expiry date: 30/09/2021
  • Note: No testing performed on pop-up waste
  • Size: 15mm copper tails or stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: XZ on body.
  • Installation Requirements R001 R006 R010
  • Model
    M0208 & M0308
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609043

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609043
  • Expiry date: 30/09/2021
  • Size: 15mm copper tails or stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: XZ on body.
  • Installation Requirements R001 R006 R010
  • Model
    M9604, M9604A & 907005.
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609044

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or bright nickel plated - BN suffix models) incorporating quarter turn ceramic disc headworks and cross top or quadrate type operating members. 907006 model has a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609044
  • Expiry date: 30/09/2021
  • Size: 15mm copper tails or stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: XZ on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    907006 BN, M33242 & M33242 BN.
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609045

Range of single hole, single outlet (fixed) combination tap assemblies (chromium or black plated brass) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlets incorporate a plastic flow straightener & the products are supplied with a click type, coin type, flip type or pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1609045
  • Expiry date: 30/09/2021
  • Size: Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections or 15mm copper tails.
  • Marking: XZ on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    900508, 900508 MBK, 901408, 900508EX, 900508EX MBK, M1008, M1008D, M1008MINI, M33178, M33208, M33218, M33218B, M33238, M33238A, M33238EX, M33238EXA, M9108A, M9108A A, M9108A B, M9108A C, M4008, M4008A, M4008B, M3228.
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609076

Range of stainless steel braided EPDM lined hose assemblies with EPDM washers. Maximum working pressure 10.0 bar & maximum operating temperature 70°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1609076
  • Expiry date: 30/09/2021
  • Marking: XZ, WRAS & date of manufacture (YYYY) on end connection
  • Installation Requirements R001
  • Model
    BZG10-1/2"-300 – 10mm x ½” BSP Captive nut BZG10-1/2"-350 – 10mm x ½” BSP Captive nut BZG10-1/2"-370 – 10mm x ½” BSP Captive nut BZG10-1/2"-400 – 10mm x ½” BSP Captive nut BZG10-1/2"-450 – 10mm x ½” BSP Captive nut BZG10-1/2"-500 – 10mm x ½” BSP Captive nut BZG12-1/2"-300 – 12mm x ½” BSP Captive nut BZG12-1/2"-350 – 12mm x ½” BSP Captive nut BZG12-1/2"-370 – 12mm x ½” BSP Captive nut BZG12-1/2"-400 – 12mm x ½” BSP Captive nut BZG12-1/2"-450 – 12mm x ½” BSP Captive nut BZG12-1/2"-500 – 12mm x ½” BSP Captive nut BZG10-15-160 – 10mm x 15mm compression BZG10-1/2"-350-02 – 10mm x ½” BSP Captive nut BZG10-1/2"-350-03 – 10mm x ½” BSP Captive nut BZG8-1/2"-350 – 8mm x ½” BSP Captive nut
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705007

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705007
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: XZ on rear of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    167019, 167019A, 167019B, 167022
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705008

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705008
  • Expiry date: 31/05/2022
  • Size: ½" BSP (M)
  • Marking: XZ on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    167023
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705009

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a non-rising spindle headworks and dome type (Models: 167020 & 167020WH) or cross top (Models: 167020F, 167020G & 167020A) operating members. The inlets incorporate a stainless steel strainer. The spout outlet incorporates a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705009
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: XZ on rear of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    167020, 167020WH, 167020F & 167020G Model added September 2020 167020A
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705010

Range of deck mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks and dome type (Model 167021) or cross top (Models 167021F & 167021G) operating members. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705010
  • Expiry date: 31/05/2022
  • Size: ½” BSP (M)
  • Marking: XZ on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    167021, 167021F & 167021G
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705081

Range of single hole, single outlet (swivel) combination tap assembly (Chromium plated brass or white finish - 167020WH model). Incorporating a non-rising spindle headworks and dome type (Models: 3663602930587) or cross top (Models: 3663602930563) operating members. The inlets incorporate a stainless steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705081
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: PPI on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    3663602930587 KELD TWIN LEVER KICHEN MIXER TAP WHITE AND 3663602930563 KELD TWIN LEVER KICHEN MIXER TAP CHROME
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705082

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705082
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    3663602930570 AUBERRY TWIN LEVER KITCHEN MIXER TAP CHROME EFFECT & 3663602930556 LOFOI TWIN LEVER KITCHEN MIXER TAP CHROME EFFECT
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705083

Range of deck mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks and dome type. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705083
  • Expiry date: 31/05/2022
  • Size: ½” BSP (M)
  • Marking: PPI on body
  • Installation Requirements R001 R006 R010
  • Model
    3663602930679 EDITH DECK KITCHEN MOXER TAP CHROME EFFECT
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705084

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705084
  • Expiry date: 31/05/2022
  • Size: ½" BSP (M)
  • Installation Requirements R001 R006 R010
  • Model
    3663602930686 GALLENY DECK KICHEN MIXER TAP CHROME EFFECT
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709047

Floor mounted, single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The product incorporates a waterfall spout and is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1709047
  • Expiry date: 30/09/2022
  • Size: ½” BSP (F).
  • Marking: PPI on rear of tap body. PPI on shower handset.
  • Installation Requirements R001 R040 R160
  • Model
    901625
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710034

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members (M3106 model only). The spout outlets incorporate plastic flow straighteners (except model 170606). The products are supplied with metal backnuts (except model 111316). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710034
  • Expiry date: 31/10/2022
  • Note: R007 only applies to model 111316
  • Size: M3106, M3206, 170606 models: ¾” BSP (M). 111316 model: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R007 R010
  • Model
    M3106, M3206, 170606, 111316
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710035

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710035
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    100806 & 100806B
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710036

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members (163108, 163108E & 163108F models) or ceramic disk headworks with single lever operating members (163208 model). The spout outlet incorporates a plastic flow strainer. The products are supplied with a click type waste and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710036
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on body
  • Installation Requirements R001 R006 R010
  • Model
    163108, 163108E, 163108F & 163208.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710037

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (except model 170605). The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710037
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI logo on rear of body
  • Installation Requirements R001 R006 R030
  • Model
    900505, M33175, 100805, 100805A, 170605 & 111305.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710038

Floor mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose & handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710038
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI logo on back of body
  • Installation Requirements R001 R030
  • Model
    900525
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710039

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout incorporates a waterfall outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710039
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI markings on body
  • Installation Requirements R001 R006 R160
  • Model
    900406, 901606, 901606B, 901606C & 163006.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710042

Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710042
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on body.
  • Installation Requirements R001 R006 R040 R160
  • Model
    163005 & 900405.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710040

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever or cross top (M3105 model only) operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1710040
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R020
  • Model
    M33215, M33235, M3105 & M3205.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710041

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout has a waterfall outlet. The product is supplied with a shower hose and handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1710041
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R040 R160
  • Model
    901605.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711013

Range of single hole, metal single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks and single lever operating members. Spout outlets incorporate either a plastic aerator (901407 model) or plastic flow straightener (all other models). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711013
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R006 R010
  • Model
    901407, 901407E, 907016 & 907016A
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711014
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    907002 & 907020
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711038

Thermostatic cartridge with plastic body incorporating EPDM rubber ‘O’-rings. For insertion into specifically dimensioned bores. Maximum operating temperature 70°C.

  • Section: 0442 Thermostatic cartridges
  • WRAS Approval Number: 1711038
  • Expiry date: 30/11/2022
  • Size: Ø23mm.
  • Marking: PPI on base of body.
  • Installation Requirements R001
  • Model
    TC189.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711044

Range of shower outlets with brass or plastic bodies, in chromium or gold plated finishes (see model). Models 364, 364PVD, HS107, HS307, L115-CP and HS119 incorporate a washer that houses a stainless steel strainer. Maximum operating temperature: 80ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711044
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (M) or ½” BSP (F) (Model HS119 only)
  • Marking: PPI on Body
  • Installation Requirements R001 R040
  • Model
    Chromium plated brass models: 364 & L292. Gold plated brass model: 364PVD. Chromium plated plastic models: B100111, B11363, B11663, HS107, HS1110CP, HS123, HS126, L115-CP, HS307 & HS119. Models added January 2020 Matt Black: B11663 MBK1 HS126 MBK1 HS307 MBK1
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711011

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type, which incorporates a single check valve cartridge and plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711011
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear-base of tap body.
  • Installation Requirements R001 R010 R090
  • Model
    167028
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711015

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets are pull-out spray type and incorporate plastic flow straighteners (with the exception of M4107). The hose connection to the outlet incorporates an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection.. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711015
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R090
  • Model
    907013, M4107 & M9604T.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Model 111338 incorporates a ceramic cartridge headwork and single lever operating member. Model M3108 incorporates quarter turn ceramic disc headworks, and cross top operating members. The spout outlets incorporate plastic flow straighteners and models are supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712014
  • Expiry date: 31/12/2022
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    M3108 & 111338.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712015

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener, with the exception of 170638. Models 162438EX, 100848 & 162938 incorporate a stainless steel strainer at the outlet. Models are also supplied with either a lever operated (100848 only) or click type pop-up waste (all other models). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712015
  • Expiry date: 31/12/2022
  • Note: No testing performed on lever operated pop-up waste.
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    162438EX, M3208EX, 100848, 162438, 162938 & 170638.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712016

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc headworks, available with either cross top (M3101 & M3102) or single lever (M3201 & M3202) operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C (M3101 & M3201) & 85°C (M3102 & M3202).

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1712016
  • Expiry date: 31/12/2022
  • Size: ½” BSP (M) - (M3101 & M3201) or ¾” BSP (M) - (M3102 & M3202).
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M3101, M3201, M3102 & M3202.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802045

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener (179401 &179402 models) or a plastic aerator (130401 & 130402 models). The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C (130401 & 179401 models), 85°C (130402 & 179402 models).

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1802045
  • Expiry date: 28/02/2023
  • Size: See model
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    130401 & 179401: ½” BSP (M) 130402 & 179402: ¾” BSP (M)
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802046

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1802046
  • Expiry date: 28/02/2023
  • Size: See model
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005
  • Model
    152101: ½” BSP (M) 152102: ¾” BSP (M)
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802040

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a stainless steel strainer and a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1802040
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    152006
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802041

Range two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The spout outlet on the 179406 model also incorporates a stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1802041
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    143306, 130406 & 179406
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802043

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The 179405 model spout also incorporates a stainless steel strainer. The products are supplied with a shower hose and handset and have metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1802043
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R030
  • Model
    143305, 130405 & 179405.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802042

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose and handset and have metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1802042
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R030
  • Model
    152005.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802044

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks (152108 model) or ceramic cartridge headworks (all other models) all with single lever operating members. The spout outlet incorporates a plastic flow straightener, except for the 152038 model which has a plastic aerator. The spout outlets of the 152108 and 179348 models also incorporate a stainless steel strainer. The products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1802044
  • Expiry date: 28/02/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    152108, 152038, 143338, 179428 & 179438.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806006

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a cascade type spout. The spout has a waterfall outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1806006
  • Expiry date: 30/06/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R160
  • Model
    162106
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806005

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout has a waterfall outlet. The product is supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1806005
  • Expiry date: 30/06/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R160
  • Model
    162105
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807004

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet is a waterfall type. The 163038 model includes a stainless-steel mesh on the outlet. Model 900408 incorporates a stainless-steel mesh within the body of the tap. Models 901608C & 900408 incorporate a plastic flow restrictor. The products are supplied with a click type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70ºC.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1807004
  • Expiry date: 31/07/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R006 R160
  • Model
    900408, 162638, 162638A, 901608C & 163038.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807005

Range of pillar taps (chromium plated brass or gold finish - GF model) incorporating quarter turn ceramic disc headworks with cross top operating members. Model 179101 is supplied with a plastic flow regulator. All models are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1807005
  • Expiry date: 31/07/2023
  • Size: See Model
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005
  • Model
    179101: ½” BSP (M). 179102 & 179102 GF: ¾” BSP (M).
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804006

Wall mounted, concealed, thermostatic shower valves incorporating half turn ceramic disc headworks controlling and diverting the flow and the temperature is controlled independently via a thermostatic cartridge, both using dome, cross top or single lever operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1804006
  • Expiry date: 30/04/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: 15mm compression inlet/outlet
  • Marking: PPI on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    803251C, 803251E, 803251J & 803251K.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809011

Range of two hole, single outlet (fixed) deck mounted combination tap assemblies (chromium plated brass, model 173606 MBK1 has a matte black finish), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate either a plastic flow straightener (143106 &153306 models), a plastic aerator (172306) or an open outlet (173606). The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809011
  • Expiry date: 30/09/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    143106, 153306, 172306 & 173606. Models added June 2021 173606 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809012

Two hole, single outlet (fixed) deck mounted combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809012
  • Expiry date: 30/09/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    M33146E
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809025

Range of deck mounted two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass). The 179606F model incorporates quarter turn ceramic disc headworks and a combined EPDM washer and stainless steel strainer located between the inlet leg and main body. The M5306 model incorporates non-rising spindle headworks. Both models have cross top operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809025
  • Expiry date: 30/09/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    M5306 & 179606F.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809026

Range of exposed, wall mounted, bar type thermostatic shower valves (chromium plated brass), incorporating either a non-rising spindle or quarter turn ceramic disc (801104 model only) headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge with an operating member that incorporates a manual override button. The 801101B and 801104 models have dome type operating members and the 801101A model has single lever operating members. Each inlet incorporates a combined EPDM washer and stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, chromium plated shower handset and riser rail assembly. Maximum working pressure 10.0 bar. Max operating temperature 60° C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1809026
  • Expiry date: 30/09/2023
  • Size: ¾" BSP x 15mm compression offset union.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R010 R040
  • Model
    801101A, 801101B & 801104.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809057

Range of single hole, single outlet (swivel) combination tap assemblies incorporating ceramic cartridge headworks with single lever operating members. The inlets incorporate a stainless steel strainer. The spout outlets incorporate either an aerator or a flow straightener with stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809057
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut
  • Marking: PPI on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    177004, 177005, 177005 BN, 177006 & 177012
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809062

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809062
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R010 R090
  • Model
    177014.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809063

Single hole, single outlet (swivel) combination tap assemblies (bright nickel or chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-down spray type and incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809063
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 r010
  • Model
    137040 BN. Added January 2020 137040 (Chrome).
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807006

Range of pillar taps (chromium plated brass or gold finish - GF models) incorporating quarter turn ceramic disc headworks and various operating members (see model). The 100801 model incorporates a plastic flow straightener. The 143101, 901001 and 901002 models incorporate a chrome plated plastic flow straightener. The 173601 and 901001 (suffix models) are supplied with a plastic flow regulator for installation on the inlet. All models are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C for all models except for the 173602 model which is 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1807006
  • Expiry date: 31/07/2023
  • Size: 143101, 100801 173601 & 901001 models: ½” BSP (M). 173602 & 901002 models: ¾” BSP (M).
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    100801 (single lever operating member). 143101 (single lever operating member). 901001 (single lever operating member). 901001A (dome type operating member). 901001E (dome type operating member). 901001F (cross top operating member). 901001 GF (cross top operating member). 173601 (single lever operating member). 901002 (single lever operating member). 901002A (dome type operating member). 901002E (dome type operating member). 901002F (cross top operating member). 901002 GF (cross top operating member). 173602 (single lever operating member).
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810029

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1810029
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (M).
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R010
  • Model
    181006.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810040

Floor mounted single hole, single outlet (fixed), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0675 Combination Tap Assemblies
  • Section Subtitle: Single outlet, metal, fixed, manual diverter to shower outlet.
  • WRAS Approval Number: 1810040
  • Expiry date: 31/10/2023
  • Size: ½” BSP (F)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R010 R040
  • Model
    140525
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810041

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass or gold finish - GF suffix model), incorporating quarter turn ceramic disc headworks with a cross top or single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and alternative inlet hoses which are PEX lined. The PEX lined hoses incorporate a combined washer and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C, except when installed with alternative PEX lined inlet hoses which is 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810041
  • Expiry date: 31/10/2023
  • Note: IRN R009 applies to the optional PEX lined inlet hoses. No testing performed on pop-up waste.
  • Size: Stainless steel braided EPDM or grey polymeric braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    179608F, 179608F GF, 179108 & 172908
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810042

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810042
  • Expiry date: 31/10/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear base of tap.
  • Installation Requirements R001 R006 R010
  • Model
    181038
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810043

Range of wall mounted thermostatic bar type shower valves with a ¼ turn ceramic disc headwork (801509 & 801510 models) or a non-rising spindle headwork (801508 model) controlling the flow. The temperature is controlled independently via a thermostatic cartridge models which incorporates a manual override button. The 801508 & 801510 models have dome type operating members; the 801509 model has cubed operating members. Each inlet incorporates a combined EPDM washer with stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1810043
  • Expiry date: 31/10/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” offset unions.
  • Marking: PPI on rear of valve body.
  • Installation Requirements R001 R010 R040
  • Model
    801508, 801509 & 801510: ¾” x ½” offset unions. Models added June 2019: 801508 FF, 801509 FF & 801510 FF: 15mm compression end connections Models added January 2021: 801508 MBK1 801509 MBK1 801510 MBK1 801508 FF MBK1 801509 FF MBK1 801510 FF MBK1
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810044

Range of deck mounted single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum working temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810044
  • Expiry date: 31/10/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    147010 & 147016.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810046

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1810046
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R020
  • Model
    181005
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810047

Thermostatic cartridge with plastic body incorporating EPDM ‘O’-rings. To be installed into specifically dimensioned bores. Maximum operating temperature 85°C.

  • Section: 0442 Thermostatic cartridges
  • WRAS Approval Number: 1810047
  • Expiry date: 31/10/2023
  • Size: Ø 42mm
  • Marking: PPI on cartridge body
  • Installation Requirements R001
  • Model
    TC203
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810078

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass, models 173628 and 173638 also in matte black finish), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic aerator or a plastic flow straightener. Models 173628 and 173638 have neither. All models are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810078
  • Expiry date: 31/10/2023
  • Note: IRN R009 only applies where models are supplied with the alternate grey polymeric braided PEX lined flexible inlet hose assemblies.
  • Size: Stainless steel braided EDPM or Grey polymeric braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R006 R009 R010
  • Model
    144328, 144328EX, 174538, 179638, 172728, 900528, 102028, M3228HM, 153338, 173628, 173638 & 173728. Models added June 2021 173628 MBK1 173638 MBK1
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810087

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members with a cascade type spout. All models incorporate a plastic flow restrictor in the hot and cold inlets. The products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810087
  • Expiry date: 31/10/2023
  • Note: R009 applies only to models supplied with alternate grey polymeric PEX lined flexible inlet hose assemblies.
  • Size: Stainless steel braided EPDM or grey polymeric PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on body
  • Installation Requirements R001 R006 R009 R010 R160
  • Model
    130838, 130628EX, 162638EX & 162638AEX
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901701

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70˚C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1901701
  • Expiry date: 31/01/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 r010
  • Model
    M3207Q CP
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811006

Single hole, single outlet combination tap assembly (chromium plated brass) with a pull-down spray outlet, incorporating ¼ turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The tap body incorporates a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1811006
  • Expiry date: 30/11/2023
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    177041
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810045

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate either a plastic flow straightener or a plastic aerator (177010A and 177013 models only). The 177007BN, 177009, 177008 and 177011AB models incorporate a stainless-steel strainer on the spout outlet. Suffixes in model represent aesthetic variations, such as finish or alternative operating member (denoted by A). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810045
  • Expiry date: 31/10/2023
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    177007, 177007BN (Bright Nickel), 177008, 177009, 177010, 177011, 177011AB (Antique Bronze), 177011BN (Bright Nickel), 177011A, 177011A BN (Bright Nickel) & 177013. Models added January 2020: 177007 MBK1 & 177007 BGP.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812022

Range of deck mounted, two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass or gold finish - GF suffix model), incorporating quarter turn ceramic disc headworks with cross top operating members and a manually operated diverter to the shower outlet. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1812022
  • Expiry date: 31/12/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R020
  • Model
    179105, 179605F & 179605 GF.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901019

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates plastic flow straightener. The products are supplied with shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70 °C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1901019
  • Expiry date: 31/01/2024
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R005 R020
  • Model
    M33145E
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901020

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass, model 173605 MBK1 also in matte black finish) incorporating quarter turn headworks with single lever operating members and a manual diverter to shower outlet. The spout outlets incorporate either a plastic flow straightener or plastic aerator. Model 173605 doesn’t have either. The products are supplied with shower hose, handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1901020
  • Expiry date: 31/01/2024
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R006 R020
  • Model
    143105, 153305, 172305 & 173605. Models added June 2021 173605 MBK1
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906703

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks (M0808G model) or non-rising spindle headworks (M0108, M0108F, M0608 & M0808 models) headworks and various operating members (see model). The spout outlet incorporates a plastic flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1906703
  • Expiry date: 30/06/2024
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    M0108 (dome type operating member), M0108F (cross top operating member), M0608 (cross top operating member), M0808 (cross top operating member), M0808G (single lever operating member).
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1905078

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator or plastic flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1905078
  • Expiry date: 31/05/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    M1007A & M1007B (chromium plated brass) Models added September 2021: M1007A MBK1 (Matte black) M1007A BGP (Brushed Brass)
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906021

Model HS149 is an overhead shower outlet. Models HS148, HS148 MBK1 & HS318 are shower handsets with chromium plated or matt black ABS bodies. Maximum operating temperature 80ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1906021
  • Expiry date: 30/06/2024
  • Note: Open outlet use only
  • Size: ½ BSP (M) or ½ BSP (F)
  • Marking: PPI on rear of body or fixing nut
  • Installation Requirements R001 R040
  • Model
    HS148, HS318 & HS149. Model added January 2020: HS148 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906023

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate a stainless strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1906023
  • Expiry date: 30/06/2024
  • Size: ¾” BSP (M)
  • Marking: PPI on body
  • Installation Requirements R001 R006 R020
  • Model
    801323 Thermostatic Mixer Shower
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906024

Two hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The tap is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0570 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, double outlet, swivel.
  • WRAS Approval Number: 1906024
  • Expiry date: 30/06/2024
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    M03305
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906025

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1906025
  • Expiry date: 30/06/2024
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    131706 & M33276 Models added January 2021: 131706A 131706B M33276D
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906026

Range of pillar taps (chrome plated brass) incorporating a quarter turn ceramic disc headwork with single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1906026
  • Expiry date: 30/06/2024
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    M33271
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906027

Range of pillar taps (chrome plated brass) incorporating a quarter turn ceramic disc headworks with a single lever operating member controlling the flow. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar, Maximum operating temperature 70°C

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1906027
  • Expiry date: 30/06/2024
  • Size: ½” BSP (M) or ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005
  • Model
    900101, 900101B, M1001, 900102, 900102B & M1002
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906067

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes - plated brass) incorporating quarter turn ceramic disc or non-rising spindle (M04054 model only) headworks with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1906067
  • Expiry date: 30/06/2024
  • Size: All models: Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections. M04054 model also supplied with: 15mm copper tails
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R006 R010
  • Model
    M9007T A, M9007T, M9007T BN, M9007QL, M3107 & M5010K Model added January 2020: M9007T A BN Model added March 2020: M04054
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906095

Two hole, single outlet (fixed) combination tap assembly (chrome plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating members (chrome plated zinc) and manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products is supplied with metal back nuts, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1906095
  • Expiry date: 30/06/2024
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of tap body and rear of shower handset.
  • Installation Requirements R001 R006 R020
  • Model
    131705
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906103

Range of quarter turn ceramic disc headwork or non-rising spindle headworks with brass bodies and EPDM `O` rings for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 0440 Headworks
  • WRAS Approval Number: 1906103
  • Expiry date: 30/06/2024
  • Size: ¾” & ½”.
  • Marking: PPI 20 or 24 on headwork
  • Installation Requirements R001
  • Model
    VS01-C20, VS01-C24, VS02-C20, VS02-C24, VS242, VS03-C20 VS03-C24, VS03-D20 & VS03-D24
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709405

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1709405
  • Expiry date: 30/09/2022
  • Size: SEE MODEL
  • Marking: PPI, WRAS & DATE OF MANUFACTURE YYYY/MM ON FERRULE
  • Installation Requirements R001
  • Model
    BZG10- ½"- 600 ½’’ X M10 X 1 DN8 BZG10- ½"- 400-02 15mm X M10X1 DN8 BZG10- ½"- 450-02 15mm X M10X1 DN8 BZG12-M10-555 M10X1 X M12X1 DN8 BZG12-M15-760 M15X1 X M12X1 DN8
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909372

Range of shower outlets with stainless steel bodies (chromium plated or matt black). Maximum operating temperature 85°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1909372
  • Expiry date: 30/09/2024
  • Note: Open outlet use only.
  • Size: ½” BSP inlets
  • Marking: PPI on body
  • Installation Requirements R001 R040
  • Model
    775000, 782000 & 777000 Models added January 2020: 775000 MBK1 782000 MBK1 777000 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909383

Wall brackets with brass bodies (chromium plated) and EPDM o-rings. Maximum working temperature 85°C

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1909383
  • Expiry date: 30/09/2024
  • Note: Open outlet use only
  • Size: ½” male BSP inlets
  • Marking: PPI on body
  • Installation Requirements R001
  • Model
    N116-L N116-P
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909391

Stainless steel inter-locked shower hoses with EPDM lining and various finishes. Maximum operating temperature 85°C

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1909391
  • Expiry date: 30/09/2024
  • Note: Open outlet use only.
  • Size: ½ BSP (F)
  • Marking: PPI, WRAS & year of manufacture (yyyy) on ferrule
  • Installation Requirements R001
  • Model
    SH ½”-1000S-CP SH ½”-1500S-PVD SH ½”- 1500S-CP SH ½”-1500S-EP SH ½”-1750S-CP SH ½”-1750S-EP SH ½”-500S-EP SH ½”-1500S-B SH ½”-1500S-B-PVD S ½”- 1750S-B SH ½”-M15x1-1500S-CP SH 15x1-1500S-CP SH15 ½”-1500s-CP SH22X1-15x1-1500S-CP
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909029

Click type pop-up wastes with chromium plated brass (W003 & W007 models) or zinc (W033 model) bodies and a silicone seal. Models (W003, W033) also have a matte black finish and model (W003) has a brushed nickel finish. Supplied with a metal or plastic backnut.

  • Section: 1535 Miscellaneous
  • Section Subtitle: Tap accessories.
  • WRAS Approval Number: 1909029
  • Expiry date: 30/09/2024
  • Size: 1¼" BSP (M)
  • Marking: PPI on body
  • Installation Requirements R001
  • Model
    W003, W007& W033. Models added June 2021 W003 MBK1 W003 BN W033 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909037

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener (130438 & 900108 models) or a plastic aerator (131738 model). The products are supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1909037
  • Expiry date: 30/09/2024
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    131738. 130438. 900108.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003800

Range of wall mounted, manually operated blending valves with a chromium plated body and ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 2003800
  • Expiry date: 31/03/2025
  • Size: 15mm compression
  • Marking: PPI on body
  • Installation Requirements R001 R010 R040
  • Model
    M980116A, M980116B & M980116C
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910302

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed gold PVD). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1910302
  • Expiry date: 31/10/2024
  • Size: Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.
  • Marking: PPI on rear of main body
  • Installation Requirements R001 R006 R009 R010
  • Model
    187007 187007 BGP Models added 19/07/2021 187007 SS4
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910303

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass, brushed gold PVD or stainless steel finish). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 5 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1910303
  • Expiry date: 31/10/2024
  • Size: Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.
  • Marking: PPI on rear of main body
  • Installation Requirements R001 R006 R009 R010
  • Model
    187006 187006 BGP Model added July 2021: 187006 SS4
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910308

Range of shower handsets with either (chrome plated or matt black finish) plastic or brass body. Maximum operating temperature 80°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1910308
  • Expiry date: 31/10/2024
  • Note: Open outlet use only
  • Size: ½” BSP(M)
  • Marking: PPI on body
  • Installation Requirements R001 R040
  • Model
    VIC065, HS105, HS124, L102-CP, HS108, HS167, HS301, HS304, HS305, HS326, HS327 & HS328 Models added January 2020: HS167 MBK1 HS304 MBK1 Models added February 2020: HS328 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910310

Range of shower outlets with either (chrome plated or matt black finish) plastic or brass bodies incorporating EPDM seals and ‘O’-rings and a stainless steel strainer on the inlets. Maximum operating temperature 80°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1910310
  • Expiry date: 31/10/2024
  • Note: Open outlet use only
  • Size: ½” BSP (F)
  • Marking: PPI on body
  • Installation Requirements R001 R040
  • Model
    HS122 HS135 HS139 HS159 HS161 HS165 HS138 HS158 HS160 HS162 HS166 HS182 Models added January 2020: HS139 MBK1 HS161 MBK1 HS138 MBK1 HS162 MBK1 Models added February 2020: HS166 MBK1 HS182 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910344

Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic disc headwork which controls the flow with dome operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporate a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1910344
  • Expiry date: 31/10/2024
  • Size: 15mm compression or ½” x ¾” off-set unions.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R030
  • Model
    803161D, 803161D FF, 801528, 801528 FF, 801528A & 801528A FF.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910345

Range of wall mounted concleaed thermostatic shower valves (chromium plated or matt black) incorporating a manual diverter and quarter turn ceramic disc headwork which control the flow using either cross top (803252J & 803252S), cubed (803252E) or single lever (803252C, 803252C MBK1, 803252K, 803252P & 803252V) operating members. Temperature is controlled independently via a thermostatic cartridge also using either cross top, cubed, dome type or single lever operating members. Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1910345
  • Expiry date: 31/10/2024
  • Size: 15mm compression
  • Marking: PPI on faceplate
  • Installation Requirements R001 R040 R010
  • Model
    803252C, 803252E, 803252J, 803252K, 803252P, 803252S & 803252V Model added January 2020: 803252C MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2002800

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2002800
  • Expiry date: 28/02/2025
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    M1202 & M1201
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006800

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2006800
  • Expiry date: 30/06/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with EPDM washer and ½” captive nut end connections
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    M33247A & M33247B
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003801

Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating members. The outlets incorporate a plastic flow straightener (M96012AA) or plastic aerator (M96012C). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003801
  • Expiry date: 31/03/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    M96012AA & M96012C
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003802

Range of wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2003802
  • Expiry date: 31/03/2025
  • Note: This approval does not include a shower hose and handset
  • Size: 15mm compression
  • Marking: PPI on face plate
  • Installation Requirements R001 R010 R040
  • Model
    803250C 803250E 803250J 803250K 803250P 803250S 803250V
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911318

Range of wall mounted thermostatic shower valves (brass bodies - with various finishes), incorporating a quarter turn ceramic disc headwork diverting the flow between multiple shower outlet connections. Temperature is controlled independently via a thermostatic cartridge. Products are available with various operating members and faceplates. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1911318
  • Expiry date: 30/11/2024
  • Note: This approval does not include a shower hose, shower handset or overhead shower
  • Size: 801524: ½”x ¾” BSP (M) offset reducer 801525: 15mm Compression
  • Marking: PPI on rear of the body
  • Installation Requirements R001 R010 R040
  • Model
    Single lever 801524: ½”x ¾” BSP (M) offset reducer 801524 FF: 15mm Compression 801525A: ½”x ¾” BSP (M) offset reducer 801525A FF: 15mm Compression Dome 801524A: ½”x ¾” BSP (M) offset reducer 801524A FF: 15mm compression Cubed 801525: ½”x ¾” BSP (M) offset reducer 801525 FF: 15mm Compression Where FF refers to a Fast Fit option Models added January 2020: 801524 MBK1 801524 FF MBK1 801525 MBK1 801525 FF MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1609370

Non-rising spindle headwork with brass body and NBR O-rings to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 0440 Headworks
  • WRAS Approval Number: 1609370
  • Expiry date: 30/09/2021
  • Size: 20.50mm OD
  • Marking: PPI 20/24 ON BODY
  • Installation Requirements R001
  • Model
    VSH-BZ20 & VSH-BZ24
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611388

Range of ceramic disc headworks with brass bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

  • Section: 0440 Headworks
  • WRAS Approval Number: 1611388
  • Expiry date: 30/11/2021
  • Size: 18.39mm, 18.98mm, 23.98mm OD
  • Marking: PPI 20/24 ON BODY
  • Installation Requirements R001
  • Model
    VS21- BLUE VS03-D20-L1 H - RED VS03-D20-L1 C - BLUE VS03-D20-L2 H - RED VS03-D20-L2 C - BLUE VS01-C20-L H - RED VS01-C20-L C - BLUE VS01-C20-L2 H - RED VS01-C20-L2 C - BLUE VS01-C20-L3 H - RED VS01-C20-L3 C - BLUE VS01-C20-L4 H - RED VS01-C20-L4 C - BLUE VS02-C20K H - RED VS02-C20K C - BLUE VS02-C20-L H - RED VS02-C20 L C - BLUE
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911311

Single hole, single outet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a plastic flow regulator, a plastic flow straightener and a push button spray. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1911311
  • Expiry date: 30/11/2024
  • Size: Grey polymeric (PET - Polyethylene terephthalate) braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R090
  • Model
    187008 BC
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003803

Deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2003803
  • Expiry date: 31/03/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    M5006
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003804

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporation quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003804
  • Expiry date: 31/03/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R010
  • Model
    M5008
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003805

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2003805
  • Expiry date: 31/03/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on body.
  • Installation Requirements R001 R006 R020
  • Model
    M5005
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907044

Range of two-hole, single outlet (swivel) combination tap assemblies (antique brushed or chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or a plastic/stainless steel flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1907044
  • Expiry date: 31/07/2024
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    M5004P, M3104SQL & M9004QL. Model added January 2020 M5004P AB (Antique brushed finish)
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907045

Range of high neck basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener & the products are supplied with metal back nuts. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1907045
  • Expiry date: 31/07/2024
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    M0303 & M5103.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1910004

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0490 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, double outlet, swivel.
  • WRAS Approval Number: 1910004
  • Expiry date: 31/10/2024
  • Size: All models: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. M0313 model is also supplied with: 15mm copper tails.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    M32130Q, M0313, M09130.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001032

Pillar taps (chromium plated brass) with a non-rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with a metal back nut. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2001032
  • Expiry date: 31/01/2025
  • Size: ½” BSP (M)
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R005
  • Model
    M0601, M0601A.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001064

Range of deck mounted, single hole, single outlet (fixed) pillar taps, incorporating a non-rising spindle headwork with either cross top (Models M1103 & M5403) or dome type (Models M5203 & M0103) operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2001064
  • Expiry date: 31/01/2025
  • Size: ½” BSP male
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M1103 M0103 M5403 M5203
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001102

Wall mounted, single hole, single outlet (fixed) bib tap (chromium plated brass), incorporating a non-rising spindle with a cross top operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 1750 Taps
  • Section Subtitle: Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
  • WRAS Approval Number: 2001102
  • Expiry date: 31/01/2025
  • Size: ½” BSP (M)
  • Marking: PPI on bottom of tap body.
  • Installation Requirements R001 R040
  • Model
    M1140
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005800

Range of single hole double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2005800
  • Expiry date: 28/02/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI Logo on rear of body
  • Installation Requirements R001 R006
  • Model
    907011
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003308

Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) having a non-rising spindle headwork and cross top operating members. Product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2003308
  • Expiry date: 31/03/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M0606
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010801

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010801
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections with EPDM washers.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    143138
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010802

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating non-rising spindle headworks with cross top operating members. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010802
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hoses assemblies incorporating ½” captive nut.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    143708
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003339

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2003339
  • Expiry date: 31/03/2025
  • Size: See model
  • Marking: PPI on body
  • Installation Requirements R001 R005
  • Model
    M3401A: ½” BSP (M). M3402A: ¾” BSP (M).
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003346

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Maximum operating temperature 60°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 2003346
  • Expiry date: 31/03/2025
  • Note: Open outlet use only.
  • Size: ½” BSP Captive nut.
  • Marking: PPI on ferrule.
  • Installation Requirements R001
  • Model
    SH1-2-1500-B-PVC-MBK1 (DN10), SH1-2-1500-PVC-MBK1 (DN8).
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003361

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork with cross top operating members and a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003361
  • Expiry date: 31/03/2025
  • Size: Supplied with stainless steel EPDM lined braided hoses with ½” captive nut.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    907004
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003012

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with a non-rising spindle headwork operated by either dome (M0113CP) or cross top (M0113F & M06130) operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0490 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, double outlet, swivel.
  • WRAS Approval Number: 2003012
  • Expiry date: 31/03/2025
  • Size: See model
  • Marking: PPI or rear of body
  • Installation Requirements R001 R006 R010
  • Model
    M0113CP - 15mm copper tails or stainless-steel EPDM lined flexible hose with a ½” BSP captive nut end connections. M0113F - 15mm copper tails or stainless-steel EPDM lined flexible hose assemblies with a ½” BSP captive nut end connections. M06130 - Stainless-steel EPDM lined flexible hose assemblies with a ½” BSP captive nut end connections.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003018

Range of two-hole, single outlet (fixed) combination tap assemblies. Models M5305 and M0405F are chromium plated brass. Model M0405F PVD is PVD gold plated brass. Incorporating non-rising spindle headworks, cross top operating members and manually operated diverter to shower outlet using a single lever operating member. The spout outlet on models M0405F & M0405F PVD incorporates a plastic flow straightener. The product is also supplied with a shower hose, handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2003018
  • Expiry date: 31/03/2025
  • Size: ¾” BSP (M)
  • Marking: PPI rear of tap body.
  • Installation Requirements R001 R005 R020
  • Model
    M5305, M0405F, M0405F PVD.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004008

Single hole, single outlet, fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2004008
  • Expiry date: 30/04/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R006 R010
  • Model
    162938EX
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004014

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2004014
  • Expiry date: 30/04/2025
  • Size: Stainless steel braided EPDM lined hose assemblies with EPDM washes and ½” BSP captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    193838
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004031

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2004031
  • Expiry date: 30/04/2025
  • Size: ¾” BSP (M).
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R006 R010
  • Model
    193806
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004034

Shower head with chrome plated brass body, EPDM ‘O’-rings & stainless steel strainer. Maximum operating temperature 85°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2004034
  • Expiry date: 30/04/2025
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: PPI on inlet nut.
  • Installation Requirements R001 R040
  • Model
    HS170
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004013

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating member and manually operated diverter to shower outlet. The spout incorporates a plastic aerator and the product is supplied with shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2004013
  • Expiry date: 30/04/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of tap body and shower handset.
  • Installation Requirements R001 R006 R020
  • Model
    193805
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004314

Range of pillar taps (chromium plated brass) incorporating rising spindle headwork with cross top operating members. Incorporating a plastic flow straightnener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2004314
  • Expiry date: 30/04/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005
  • Model
    M0602 & M0602A
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004043

Range of wall mounted, concealed, thermostatic shower blending valves (chromium plated brass), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. Both inlets incorporate a stainless-steel strainer and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate plastic flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2004043
  • Expiry date: 30/04/2025
  • Size: 15mm compression
  • Marking: PPI on underside of body.
  • Installation Requirements R001 R010 R040
  • Model
    800204A. 800204B.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005301

Two hole metal single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts, hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0503 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
  • WRAS Approval Number: 2005301
  • Expiry date: 31/05/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on body
  • Installation Requirements R001 R006 R030
  • Model
    M33275 Model added November 2020: M33275D
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007806

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007806
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R090
  • Model
    907015
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005346

Range of two hole single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork with cross top operating members and a manually operated diverter to shower outlet. Products are supplied with a hose and handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2005346
  • Expiry date: 31/05/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of main body.
  • Installation Requirements R001 R006 R020
  • Model
    M0605 & M0605A
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004059

Range of non-rising spindle headworks (cast brass body) with EPDM ‘O’-rings and seat washer. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 2004059
  • Expiry date: 30/04/2025
  • Size: ½” BSP (M)
  • Marking: PPI 20 or 24 on headwork.
  • Installation Requirements R001
  • Model
    VS11-BZ20. VS11-BZ24. Models added July 2020: VS5412-BZ20 VS5412-BZ24
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005345

Two hole single outlet (swivel) combination tap assembly (chromium plated brass body) with non rising spindle headwork and cross top operating members. Outlet incorporates a plastic flow straightener and the fitting is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2005345
  • Expiry date: 31/05/2025
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    907009
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010803

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated or white painted brass), incorporating quarter turn ceramic disc headworks and single lever type operating members. Outlets incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0490 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, double outlet, swivel.
  • WRAS Approval Number: 2010803
  • Expiry date: 30/06/2025
  • Size: 15mm copper tails or stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M5010A, M5010A WH (white)
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007024

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007024
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    193938
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007332

Range of wall mounted, thermostatic shower valves with chromium plated brass body. Flow is controlled by a quarter turn ceramic disc headwork with single lever operating members. Temperature is controlled by a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2007332
  • Expiry date: 31/07/2025
  • Size: 15mm Compression.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R040
  • Model
    804203 & 803203
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011801

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks with dome type or cross top operating members. Both models are supplied with a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011801
  • Expiry date: 30/11/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    M0417 & 147013
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010042

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010042
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hose assemblies with 1/2" captive nuts.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R010
  • Model
    193738 193728 143328
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010045

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2010045
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R005 R010
  • Model
    193706
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010323

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass). Incorporation a ceramic disc headwork with dome type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010323
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    207121
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010324

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a non-rising spindleheadwork with crosstop type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010324
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    197021
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010325

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a ceramic disc headwork with lever type operating members.The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010325
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    207125
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011018

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2011018
  • Expiry date: 30/11/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R020
  • Model
    193705
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012306

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork, single lever operating members and self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. The product includes a shower hose and handset. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2012306
  • Expiry date: 31/12/2025
  • Size: ¾” BSP (M).
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R030
  • Model
    M1005
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012311

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Models M4305, M4305E incorporate a non-rising spindle headwork with dome type operating members. Models M4305G & M4305F incorporate a non-rising spindle headwork with cross top operating members. Model M33135 incorporate a quarter turn ceramic disc headwork with single lever operating members. The fitting incorporates a manual diverter to the shower outlet The spout outlet incorporates a plastic flow straightener and the products are supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2012311
  • Expiry date: 31/12/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on body.
  • Installation Requirements R001 R020
  • Model
    M4305 M4305E M4305F M4305G M33135
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2106804

Self-closing basin tap assembly (chromium plated brass) incorporating spring loaded headwork and dome type operating members. The inlet incorporates a plastic flow restrictor and the spout outlet incorporates a plastic flow straightener. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

  • Section: 1820 Taps
  • Section Subtitle: Self closing, metal.
  • WRAS Approval Number: 2106804
  • Expiry date: 30/06/2026
  • Size: ½” BSP (M).
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    M96123
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105804

Range of pillar taps with brass bodies (chrome plated), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener or aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2105804
  • Expiry date: 31/05/2026
  • Size: See model
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005
  • Model
    ½” BSP (M) M33131 ¾” BSP (M) M33132
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2108801

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2108801
  • Expiry date: 31/08/2026
  • Size: See model
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    ½” BSP (M) M4301 M4301E M4301F M4301G ¾” BSP (M) M4302 M4302E M4302F M4302G
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012337

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2012337
  • Expiry date: 31/12/2025
  • Size: See model
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005
  • Model
    ½” BSP (M) 902001H 902001F 902001F PVD ¾” BSP (M) 902002H 902002F 902002F PVD
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2109800

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2109800
  • Expiry date: 30/09/2026
  • Size: ¾” BSP (M)
  • Marking: PPI on body.
  • Installation Requirements R001 R006 R010
  • Model
    M33176 M33236 900506
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2108802

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), Models M33136 & M1006 incorporate a quarter turn ceramic disc headwork with single lever operating members. Models M4306, M4306E & M4306F incorporate a non rising spindle headwork with dome type operating members. Model M4306G incorporate a non rising spindle headwork with cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. . Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2108802
  • Expiry date: 31/08/2026
  • Size: ¾” BSP (M)
  • Marking: PPI on body.
  • Installation Requirements R001 R009 R010
  • Model
    M4306 M4306E M4306F M4306G M33136 M1006
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2012325

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 2012325
  • Expiry date: 31/12/2025
  • Size: See model
  • Marking: PPI, WRAS & date of manufacture (YYYY) on crimp connector.
  • Installation Requirements R001
  • Model
    DN8 bore diameter hose. BZG-A-B-C-XXXX Where A-B-C-XXXX can be replaced by the following options: BZG – Connection A - Connection B – Outer braided material – Length A-B Connection A and Connection B (from 01 to 13): 01=F1/2 02=F1/2 Conical Connection 03=F3/8 04=F3/4 05=15mm compression fitting (17-100) 06=F15 07= F10 08= M8*1 (L=12-100) 09= M10*1 (L=12-100) 10= M12*1 (L=12-100) 11= M12*1 (two O ring) 12= M14*1 13=T connection (L=2-110) C= Outer braided material: SS = stainless steel wire. NY= grey or black nylon wire. SR= stainless steel wire plus red nylon wire. SB= stainless steel wire plus blue nylon wire. NR= grey or black nylon wire plus red nylon wire. NB= grey or black nylon wire plus blue nylon wire. XXXX Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105805

Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener or aerator (expect models M5001 and M5002). The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2105805
  • Expiry date: 31/05/2026
  • Size: See model
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    ½” BSP (M) M5001 M33211 M33211 MBK1 M33171 M33231 ¾” BSP (M) M5002 M33232 M33172 M33272 M33212 M33212 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104020

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2104020
  • Expiry date: 30/04/2026
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    204628. 204728. 204738.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104304

Wall bracket with a brass body (chrome plated) and EPMD ‘O’-rings. Maximum operating temperature 85°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 2104304
  • Expiry date: 30/04/2026
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: PPI on body.
  • Installation Requirements R001 R040
  • Model
    N116-S
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104317

Range of wall mounted bar type thermostatic shower valves (chromium plated or matt black coated brass) incorporating a manual diverter and quarter turn ceramic disc headwork controlling the flow between an overhead shower outlet or a shower handset with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that also incorporates a manual override button. Models 801540 FF and 801540 FF MBK1 are also supplied with Fast Fit connections Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2104317
  • Expiry date: 30/04/2026
  • Note: This approval does not include a shower hose and handset.
  • Size: See Model
  • Marking: PPI on rear of body.
  • Installation Requirements R001
  • Model
    801540 - ¾” Captive nut x ½” BSP (M) reducer 801540 MBK1 - ¾” Captive nut x ½” BSP (M) reducer 801540 FF – ¾” Captive nut x 15mm reducer 801540 FF MBK1– ¾” Captive nut x 15mm reducer
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104321

Range of diverter valves with a plastic body and ceramic discs.For insertion into specifically dimensioned bores. Maximum working pressure 10 bar. Maximum operating temperature 85°C

  • Section: 2050 Valves
  • Section Subtitle: Diverter.
  • WRAS Approval Number: 2104321
  • Expiry date: 30/04/2026
  • Size: 38.68mm OD
  • Marking: PPI, model number, date of manufacture on body.
  • Installation Requirements R001
  • Model
    D37-01 D37-02 (longer stem/spindle)
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105300

Range of overhead shower outlets (chrome plated plastic bodies). Inlets incorporate a strainer. Maximum operating temperature 85°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 2105300
  • Expiry date: 31/05/2026
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: .PPI on body
  • Installation Requirements R001 R040
  • Model
    HS233 HS220 HS209 HS206
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105001

Two-hole, single outlet, (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 2105001
  • Expiry date: 31/05/2026
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R030
  • Model
    M4005SL
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105004

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and pull out spray. The spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2105004
  • Expiry date: 31/05/2026
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R090
  • Model
    907023
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104024

Two hole, single outlet (fixed) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2104024
  • Expiry date: 30/04/2026
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    204606
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104033

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating member and a manual diverter to the shower outlet. The products are supplied with a shower hose and handset. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2104033
  • Expiry date: 30/04/2026
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body. PPI on shower handset.
  • Installation Requirements R001 R006 R020
  • Model
    204605. 204705.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2104054

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with cross top operating members. The spout outlet incorporates either a plastic aerator or a flow straighter. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2104054
  • Expiry date: 30/04/2026
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    207130
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1