Range of wall mounted, exposed thermostatic shower valves (chromium plated brass) incorporating ceramic cartridge headwork which controls the flow and temperature. Models 1.1928.002 & 1.928.001 incorporate a diverter which diverts the flow from hand shower to overhead shower outlets. Products are supplied with shower hose, handset or overhead shower outlets. Shower outlets have flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic cartridge headwork with diverter (for models with over-head shower options) and dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Both inlets incorporate strainers and the products are supplied with shower hose, handset and/or overhead shower outlets unless otherwise stated. Shower outlets incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating stainless steel strainers at the inlets. The flow is controlled by a non-rising headwork with single lever operating member and the temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Supplied with a shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Shower column incorporating a manual shower to shower diverter supplying a tubular outlet to either an overhead or hand shower (not supplied as part of this approval). The bottom outlet from the diverter incorporates an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C
Range of shower outlets with chromium plated brass bodies and EPDM O-rings. The inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either shower outlet. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge both have single lever operating members. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Concealed, wall mounted thermostatic shower blending valve with combined bath overflow and filler. The product incorporates a 3 way manual diverter (2 on, 1 off) to control the flow between either a shower outlet or a combined bath filler and overflow. The temperature is controlled independently via a thermostatic cartridge. The diverter and thermostatic cartridge have single lever operating members. Both inlets to the main shower valve as well as to the combined bath filler/overflow incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets to the main shower valve also incorporate a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of UPVC shower hoses with silicone ‘O’-rings and washers available in lengths of 1250mm to 2000mm. Maximum operating temperature 60°C
Overhead shower outlet having an 8” chrome plated plastic body. Maximum operating temperature 60°C.
Range of electric open outlet instantaneous showers, incorporating a solenoid valve to control the flow and a removable plastic strainer after the main inlet. Products are supplied with a shower hose and handset. Maximum supply pressure 1.0 bar. Maximum operating temperature 45°C.
Range of exposed and concealed thermostatic blending valves (brass bodies) incorporating a single sequential headwork controlling both flow and temperature. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Model 1.0.409.48.1 is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of shower arms (brass bodies - various finishes) incorporating a diverter which diverts flow between an overhead shower outlet to shower hand set. The hand shower outlet incorporates a single check valve (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Maximum operating temperature 60°C
Single hole, single outlet (swivel) combination tap assembly (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 4.1 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower control valves. The concealed bodies are brass with a chromium plated trim set. Flow and temperature are controlled by a sequential cartridge headwork with various operating members. The inlets incorporate stainless steel strainers & flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) (concealed or exposed) with a thermostatic cartridge sequential headwork controlling both flow and temperature via a dome type operating member. Inlets incorporate plastic flow regulators. Model 1.1651.008 is supplied with overhead shower outlet. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Three hole, single outlet (fixed) combination tap assemblies (chromium plated or brushed nickel finish) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the products are supplied with pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Kohler mastershower 60’ shower hose having a PVC liner and interlocked stainless steel outler. Open outlet use only. Maximum operating temperature 85°C
Rada electronically controlled thermostatic blending valve. With a stainless steel body, EPDM ‘o’ rings and seals. Maximum working pressure 13.8 bar. Maximum operating temperature 85°C
Range of shower handsets having plastic bodies (in various finishes). Inlets incorporate a combined plastic flow regulator and single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only
Floor mounted single hole, single outlet (fixed) combination tap assembly (in various finishes) Incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass). Flow is controlled by a quarter turn ceramic cartridge headwork and temperature is controlled independently via a thermostatic cartridge, both with dome operating members. Both inlets incorporate stainless steel strainers. Some valves are supplied with shower hose, riser rail and shower handset (please refer to model). Some valves are supplied with shower hose, riser rail, shower handset & overhead shower (please refer to model). On these models the flow is diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork. The inlets of models (Atom ERD – (1.1836.003) Coda Pro ERD – (1.1836.006) Relate ERD – (2.1878.002) Reflex ERD – (2.1878.004) APT ERD – (1.1878.008) & React ERD – (2.1878.006) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted bath spout with a brass body, available in different various finishes. The outlet incorporates a flow straightener. Maximum operating temperature 60°C
Three hole, single outlet (fixed) combination tap assembly (in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the headworks via grey stainless steel braided EPDM hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the side valves via stainless steel braided EPDM lined flexible hoses assemblies. The spout outlet. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of single hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. The 77959W-4A-** model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly with a brass body (in various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed thermostatic shower blending valves with a DZR brass body and trim set (various finishes and operating members - see model section). The C78023 models incorporate a ¼ turn ceramic disc valve controlling the flow to a single shower outlet. The C78024 models incorporate a 2 way ceramic disc headwork controlling the flow between 2 shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted two hole thermostatic shower valve having a brass body (various finishes) Incorporating quarter turn ceramic disc headworks, and dome type operating members and stainless steel strainers. The temperature is controlled independently via a thermostatic cartridge and dome/lever/crosstop operating member. Inlets incorporate a single check valve assembly, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
A range of wall mounted, concealed thermostatic shower blending valves with a DZR brass body and trim set (various finishes and operating members - see model section). The C99865ST-9 model controls the flow to two shower outlets. The C78024 models controls the flow between 3 shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Range of wall mounted three hole, single outlet (fixed) combination tap assemblies (concealed brass body and external trim sets in various finishes). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of overhead shower outlets having plastic bodies and EPDM seals & swivel joint. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted concealed, two hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a half turn ceramic disc headwork with dome type operating members. The spout outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted concealed three hole, single outlet (fixed) combination tap assemblies (in various finishes) incorporating quarter turn ceramic disc headwork with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Concealed (thermostatic) digital mixing valve for washbasins with programmable temperatures, duty flush and thermal disinfection facility. Flow is controlled by a solenoid valve activated by via an infra-red sensor. The product is supplied with a spout outlet incorporating a plastic aerator. Each inlet incorporates an isolation valve, stainless steel strainer, plastic flow regulator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assembles (chrome plated brass), incorporating either a ceramic cartridge with dome type operating members (models -8A), all other models incorporate quarter turn ceramic disc headworks with either wheel, dome or single lever operating members. The spout outlet incorporates a plastic aerator. Products are supplied with a click type waste outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of four hole, single outlet (fixed) combination tap assemblies (various finishes - see model) incorporating quarter turn ceramic disc headworks with single lever operating members and self-cancelling diverter to a shower hose. The spout outlet incorporate a plastic flow straightener, (except for the C77986 models). The product is supplied with stainless steel braided EPDM lined flexible hose assemblies for installation between the side valves and the spout Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of three hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes - see model). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlets are connected to the flow control valves via stainless steel braided EPDM lined flexible hose assemblies. The spout outlet of the C77987 models only incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of three hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes - see model). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlets are connected to the flow control valves via stainless steel braided EPDM lined flexible hose assemblies. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of shower handsets with plastic bodies (various finishes). Some products are sold as a kit comprising of shower handset, hose & slide rail. Maximum operating temperature 45°C.
Range of PVC lined shower hoses (various finishes). Maximum operating temperature 60°C.
Range of ceiling mounted shower arms with brass bodies (various finishes) Maximum operating temperature 85°C
Single hole, single outlet (fixed) over the rim bidet combination tap assembly (various finishes). Incorporating ceramic cartridge and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Overhead, ceiling mounted shower outlet with chromium plated brass body (various finishes). Maximum operating temperature 60°C.
Non-verifiable double check valve assembly incorporating DZR brass (chrome plated) body two spring loaded, resilient trim in-line check valve cartridges & a drain port located between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (fixed) combination tap assembly with a brass body (various finishes), incorporating a ceramic cartridge headwork and single lever operating member with self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The diverter outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of two hole wall mounted thermostatic bar type mixing valves with a chrome plated brass body, incorporating a quarter turn ceramic disc headwork with dome type operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic blending valves with chrome plated brass bodies and ceramic disc headwork with a dome type operating member. Temperature is controlled independently via a thermostatis cartridge also with a dome type operating member. Inlets incorporate single check valve cartridges however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Supplied with a shower, hose, handset and rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range wall mounted exposed or concealed thermostatic shower valves having brass bodies (chromium plated) or chrome plated trim sets when concealed. Flow and temperature are controlled via a thermostatic cartridge with a dome type operating member. Models supplied with a hose, shower rail and handset (Miniduo EV, Miniduo BIV, Miniduo BIR with Eco Showerhead) Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Range of thermostatic mixing valves with between 1 and 6 outlets. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Models Mira Activate 1.1903.091, 1.1903.092 & 1.1903.093 incoporate a built-in pump which is set 12 litres per minute. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves have a maximum working pressure of 1.0 bar. Maximum operating temperature 50°C.
Three hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator and is connected to the headworks via stainless steel braided PEX lined hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Three hole, single outlet (fixed) combination tap assemblies with a brass body (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60ºC.
Range of single hole, deck mounted, single outlet (fixed) electronically controlled combination tap assemblies with brass bodies (various finishes), flow is controlled by a solenoid valve activated via an infra-red sensor. Some models have a pre set temperature.. Inlets incorporate stainless steel strainers and single check valve cartirdges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of two hole, wall mounted single outlet (fixed) electronically controlled combination tap assemblies with brass bodies (various finishes), flow is controlled by a solenoid valve activated via an infra-red sensor. Some models have a pre set temperature. Inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models 23472W-4-CP and 23475W-4-CP are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic mixers incorporating a brass body (chromium plated) and ceramic disc headwork with dome type operating members The temperature is controlled independently via a thermostatic cartridge with dome type operating member and manual override button. Both inlets incorporate a stainless steel strainers and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Model 1.1900.018 is supplied with a shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted thermostatic mixers incorporating brass body (chromium plated) and ceramic disc headwork with dome type operating members The temperature is controlled independently via a thermostatic cartridge with dome type operating member and manual override button. Both inlets incorporate a stainless steel strainers and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a shower hose, shower handset and shower rail. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Range of two hole, single outlet (fixed) combination tap assemblies incorporating brass body (chromium plated) and ceramic disc headwork with dome type operating members The temperature is controlled independently via a thermostatic cartridge with dome type operating member and manual override button. The spout outlet incorporates a plastic flow straightener. Both inlets incorporate a stainless steel strainers and an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Range of shower outlets incorporating brass bodies (various finishes). Maximum operating temperature 60°C.
Bath spout with brass body (chromium plated). The outlet incorporates a plastic aerator. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (chrome plated) and ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Models 74013W-4AB-CP and 74026W-4AB-CP are supplied with a pop up waste . Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves incorporating chrome plated brass bodies. Product is supplied with a shower hose, handset and riser rail and over head shower. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of wall mounted single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a touchless operation method which operates a solenoid valve which controls the flow and is connected via a hose to the spout outlet. The spout outlets incorporate a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.
Wall mounted two hole, metal, single outlet (fixed) combination tap assembly (brass body in various finishes - see model), incorporating a 2 way ceramic disc diverter controlling the flow between the spout outlet and the shower outlet with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a touchless operation method which operates a solenoid valve which controls the flow and is connected via a hose to the spout outlet. The spout outlets incorporate a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.
Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The product is supplied with dome type operating members. The inlets incorporate a stainless steel strainer and single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wastewater heat recovery systems incorporating stainless steel corrugated pipe. Maximum working pressure 16.0 bar. Cold water use only.
Range of wall mounted shower elbows with brass bodies (chrome plated) incorporating single check valves cartridges fitted on the outlet (however, the complete product has not been fully tested to demonstrate it provides backflow protection).Maximum operating temperature 65°C.
Range of shower arms with a brass body and various finishes. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Bath spout incorporating a brass body (various finishes), EPDM ‘O’-rings and a plastic flow straightener. Maximum operating temperature 60°C
Wall mounted two-hole, single outlet (fixed) combination tap assembly with a brass body (chrome trim set) incorporating a ceramic cartridge headwork and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of shower kits, shower outlets and shower hoses. The shower handsets and overhead shower inlets incorporate a plastic flow regulator. Maximum operating temperature 45°C.
Shower bracket, incorporating a brass body(various finishes) and EPDM O’-rings. Maximum operating temperature 85°C.
Isolation elbow, incorporating brass bodies (chrome plated) and brass ball (chrome plated), EPDM O-rings and a PTFE seal. The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C
Two hole, single outlet (fixed) combination tap assembly with brass body (various finishes). Incorporating quarter turn ceramic disc headworks, and self cancelling diverter to shower outlet. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of overhead shower outlets incorporating metal bodies (various finishes) and flow regulator and strainer on the inlets. Maximum operating temperature 43°C.
Range of shower kits, comprosing of shower handset, shower hose, riser rail and overhead shower outlet depending on kit. Inlets incorporate a flow regulator (models 1.1740.578 & 1740.155) Maximum operating temperature 60°C.
Wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (chrome plated), incorporating single sequential headwork with single lever operating member. The inlets incorporate a screwdriver operated servicing valve and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Deck mounted, two-hole, single outlet (fixed) concealed combination tap assembly with brass body (chrome plated), incorporating a single sequential headwork with single lever operating member. The inlets incorporate a screwdriver operated servicing valve and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower blending valves incorporating brass bodies and an external trim set (various finishes). Flow is controlled to each shower outlet via individual ‘detent’ (push to on push to off) headworks. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, shower handset, riser rail and overhead shower outlet. The product is also supplied with two loose plastic flow regulators for installation between the valve and the shower hose, as well as on the inlet to the overhead shower. Maximum working pressure 5.0 bar. Maximum operating temperatures: shower handset 50°C, all other items 65°C.
Range of three hole, single outlet (fixed) combination tap assemblies incorporating chrome plated brass bodies, quarter turn ceramic disc headwork with lever type operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided PEX lined flexible hose assemblies to connect between the valves and spout Model 23484W-4-CP is supplied with pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic blending valves (chromium plated brass), incorporating ceramic disc headwork with a dome type operating member and a manual diverter which diverts the flow between an over head shower and a bath. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature is 60°C.
Wall mounted three-hole, single outlet (fixed) combination tap assembly with a brass body (chrome plated) incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of shower handsets and shower kits. Shower kits 2.1703.391, 2.1703.015 & 2.1703.016 incorporate a shower handset, shower hose and riser rail. Shower handset inlets incorporate a flow regulator. Maximum operating temperature 60°C.
Range of electronic, thermostatic mixing valves which incorporate a solenoid valve on the inlet and various outlet configurations dependant on model. All models are supplied with a user interface that controls flow and temperature. The inlets of models 1.1503.678, 1.1503.682, 1.1503.690, 1.1503.698 & 1.1621.099 incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Model 1.1503.702 – Rada Sense W KIT T3 Washbasin is supplied with a wall mounted spout outlet. Model 1.1503.706 – Rada Sense S KIT T3 Shower is supplied with a fixed shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly (not included) for either full or reduced flush. Cold water use only.
Single hole, single outlet (swivel) combination tap assembly with a brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, concealed, thermostatic blending valve with brass body and chrome plated trim set. Incorporating a thermostatic cartridge headwork with dome type operating member incorporating a manual override button. The valve is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of overhead shower outlets with plastic bodies (chrome plated), plastic spray plates (chrome plated or white coloured finish) and blue TPE nozzles. The inlet incorporates a combined EPDM washer and stainless steel strainer. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) combination tap assemblies (brass body, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies with a brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
‘Purist’ range of three hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes, see model), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided EPDM lined flexible hose assemblies for installation between the side valves and ‘T’ connector, and a pop-up waste. Maximum working pressure 4.1 bar. Maximum operating temperature 65°C.
Range of handshower holders with brass bodies (various finishes). The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C
Range of shower heads with brass bodies (various finishes), incorporating EPDM ‘O’-rings and plastic flow regulator. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves incorporating brass bodies (various finishes), self-cancelling diverter and self-closing headwork. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Models 1.1967.001, 1.1967.002, 1.1967.003 & 1.1967.004 are supplied with a shower hose, handset and riser rail and overhead shower. Models 1.1967.005, 1.1967.006, 1.1967.007 & 1.1967.008 are supplied with a shower hose, handset, riser rail & bath filler. Models 1.1967.009, 1.1967.010 & 1.1967.011 are supplied with a shower hose, handset and riser rail, overhead shower & bath filler. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Range of multi-function shower handsets with white or chrome plated plastic bodies. The inlet incorporates a plastic flow regulator. Maximum operating temperature 60°C.
‘Composed’ range of three hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes, see model), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlets incorporate a plastic aerator. The products are supplied with stainless steel braided EPDM lined flexible hose assemblies for installation between the side valves and ‘T’ connector, as well as between the ‘T’ connector and the spout. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Two hole, single outlet (fixed) combination tap assembly (chrome plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates an flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C. The product is supplied with shower hose and handset.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with click type pop-up waste Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets (plastic bodies – various finishes).
Non-metallic materials and components comply with BS6920 at 60°C
Range of multifunctional hand shower outlets with plastic bodies. The inlet is fitted with a single check valve and flow regulator, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 65°C
Range of single function handsets plastic bodies - various finishes. The inlet incorporates a single check valve and flow regulator, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 65°C
Three hole single outlet combination tap assembly (chromium plated brass body) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates an aerator. This product is supplied with stainless steel braided PEX lined flexible hose assemblies which connect from the inlets to the spout. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Overhead shower outlets, (brass bodies - various finishes). The inlet is fitted with a flow regulator. Maximum operating temperature 42°C. Open outlet use only.
Pillar taps with chromium plated - brass bodies incorporating a quarter turn ceramic disc headwork, with single lever type operating members. The spout outlet incorporates a flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 45°C
Range of exposed and conceled thermostatic mixing valves with brass bodies (chrome plated or finished for concelled). Incorporating single check valves at the inlets, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of overhead shower outlets with brass bodies (various finishes, see model), with stainless steel strainers and EPDM O-rings at the inlets. Models 26295W-** & 26295W-G-** are also supplied with flow regulators. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves brass body with black finish. Flow is controlled and on twin outlet models, diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork with dome operating member. Temperature is controlled independently via a thermostatic cartridge with manual override button and dome type operating member. Both inlets incorporate stainless steel strainers. The inlets of models 1.1836.465 & 1.1878.467 incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 50°C.
Range of wall mounted, concealed, three hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn, ceramic disc headworks with cross top (14415W-3-CP) or single lever (14415W-4-CP) operating members. The spout outlet incorporates a plastic aerator. Maximum operating temperature 60°C. Maximum operating pressure 4.1 bar.
Range of deck mounted three hole single outlet (fixed) combination tap assemblies with brass bodies (chromium plated), incorporatinig ceramic disc headworks with cross top (14428W-3-CP) or single lever (14428W-4-CP) operating members. The product is supplied with stainless-steel braided EPDM lined flexible hose assemblies to connect the headworks to the spout outlet. Spouts incororate plastic flow straightners. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Range of single-hole, single outlet, fixed combination tap assemblies, (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with click type pop-up wastes Maximum working pressure 5 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower outlets and shower handsets with plastic bodies (various finishes) and multi-spray patterns depending on model. Maximum operating temperature 50°C.
Range of shower outlets with plastic bodies (chromium finish). Incorporates flow a regulator. Claims of flow rate made by the manufacture on flow rate are not part of this approval. Maximum operating temperature 85°C
Range of shower outlets having plastic bodies, various finishes Maximum operating temperature 55°C
Wall mounted bath shower mixer with brass body (various finishes). Ceramic disc headwork with dome operating members, manually operated diverter to shower outlets. The temperature is controlled independently via a thermostatic cartridge using a single lever operating member. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Spout outlet incorporates a plastic aerator. Products are supplied with shower headhead, shower handset and shower hose. Maximum operating pressure 10 Bar. Maximum operating temperature 85°C.
Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic aerators (except 2.1977.005 that has flow restrictor) and the products are supplied with plastic backnuts. Maximum operating pressure 5 bar. Maximum operating temperature 60°C
Non-metallic materials and components comply with BS6920 at 60°C
Deck mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) with a self-cancelling diverter to a shower outlet. The product incorporates a ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts, stainless steel braided PVC lined shower hose and chromium plated shower handset. Maximum operating pressure 5 bar. Maximum operating temperature 60°C
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets and shower kits with chromium plated ABS bodies. Some models incorporate a shower hose.
Non-metallic materials and components comply with BS6920 at 60°C
Combined bath filler and overflow waste assembly with plastic bodies (various finishes).The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates click type pop-up waste (verified by test). Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN R090 applies. Maximum operating temperature 45°C.
T-type thermostatic mixing valve with a brass body. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless steel strainers. Maximum working pressure 10 bar. Maximum operating temperature 65°C
Range of wall mounted, thermostatic blending shower valves, incorporating a quarter turn ceramic disc headworks or ceramic disc diverter cartridges (see models) with a cube type operating members. The temperature is controlled independently via a thermostatic cartridge with a cube type operating members that incorporate manual override buttons. Model (1.1901.001) is supplied with a shower hose, hanset & riser rail assemblies. Model (1.1901.002) is supplied with a shower hose, handset, overhead shower & riser rail assebmlies. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 10 bar. Maximum operating temperature 45°C
Non-metallic materials and components comply with BS6920 at 45°C
Range of MIRA MODE high pressure or pumped, wall fed or ceiling fed bath/shower mixing valves supplied with overhead shower and shower handsets. Inlets are supplied with isolation valves. Maximum working pressure 5 bar for high pressure models and 1 bar for pumped models. Non-metallic materials and components comply with BS6920 at 48°C.
Range of shower outlets with plastic bodies available in white or chromium finishes. Model 2.1605.154 (1867.012) is supplied with a shower hose. Open outlet use only. Maximum operating temperature 55°C.
Range of quarter turn ceramic disc headworks with brass bodies, intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of shower handsets with either a white or chrome plated plastic body. Maximum operating temperature 45°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
