Combination Tap Assemblies

Section Code 0450 : Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#2309925

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309925
Expiry date:
30/09/2028
Size:
Model IT1008CP 10mm copper tails Model IT1008FT Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Model, date of manufacture (MM/YY) on body. Inta on operating member.
Installation Requirements:
R001 R006
Model:
IT1008CP IT1008FT
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval

#1906903

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type members. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Models VAC BAS E4 C MT & VAC BAS E6 C MT are also supplied with a plastic flow regulator, intended for installation at the inlets. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906903
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
Marking:
Bristan on operating member.
Installation Requirements:
R001 R006 R010
Model:
VAC BAS C MT, VAC BAS E4 C MT & VAC BAS E6 C MT.
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1904306

Zephyr range of single hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Models BDM-ZEP-301-CP, BDM-ZEP-301-MB and BDM-ZEP-301-PG come with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904306
Expiry date:
30/04/2024
Note:
No testing has been done on pop up waste.
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Bagnodesign on body
Installation Requirements:
R001 R006 R010
Model:
Zephyr range: BDM-ZEP-301S-CP (chrome plated) BDM-ZEP-301S-MB (Matt Black) BDM-ZEP-301S-PG (PVD Gold) Models added June 2019: BDM-ZEP-301-CP (Crome Plated) BDM-ZEP-301-MB (Matt Black) BDM-ZEP-301-PG (PVD Gold) Models come with a pop-up waste
Factor:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval

#1906703

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks (M0808G model) or non-rising spindle headworks (M0108, M0108F, M0608 & M0808 models) headworks and various operating members (see model). The spout outlet incorporates a plastic flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906703
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body
Installation Requirements:
R001 R006 R010
Model:
M0108 (dome type operating member), M0108F (cross top operating member), M0608 (cross top operating member), M0808 (cross top operating member), M0808G (single lever operating member).
Factor:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1904062

‘Grosvenor’ range of single hole, single outlet (fixed) combination tap assemblies (chromium or nickel-plated brass) incorporating ¼ turn ceramic disc headworks with single lever or cross top operating members. The spout outlet incorporates a plastic flow straightener. Models 76169, 76169NK, 85169, 85169NK, 98169 and 98169NK are supplied with a lever type pop up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 55°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904062
Expiry date:
30/04/2024
Note:
No testing performed on lever operated pop up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Just Taps Plus logo ‘JTP’ on rear of tap body.
Installation Requirements:
R001 R006 R010
Model:
GROSVENOR - CROSS 76169, GROSVENOR - CROSS 76169NK, GROSVENOR - LEVER 85169, GROSVENOR - LEVER 85169NK, GROSVENOR - PINCH 98169, GROSVENOR - PINCH 98169NK, GROSVENOR - CROSS 76169NPW, GROSVENOR - PINCH 98169NPW, GROSVENOR - LEVER 85169NPW.
Factor:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Unit 3, Tomo Industrial Estate, Packet Boat Lane, Cowley.
Postcode
UB8 2JP
Country
Uxbridge.
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval

#1904064

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass body) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. Models 33500720 & 33505720 are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904064
Expiry date:
30/04/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating 10mm spigot end connections.
Marking:
“Dornbracht” on front of body.
Installation Requirements:
R001 R006 R009 R010
Model:
33500720, 33505720 & 33521720.
Factor:
Aloys F.Dornbracht GmbH & Co. KG
Company Name
Aloys F.Dornbracht GmbH & Co. KG
Address
Koebbingser Muehle 6 D- 58640 Iserlohn Germany

View All Listings by this Company

Print This Approval

#1904334

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904334
Expiry date:
30/04/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DueGi Logo on body and operating member
Installation Requirements:
R001 R006 R010
Model:
DueGi SETA - D6222-337, DueGi STYLE - D2922-334, DueGi PISA - DG6162-315, DueGi ALPI - DG3222-336, DueGi ISEO - DG1062-662.
Factor:
DueGi Rubinetterie Srl
Company Name
DueGi Rubinetterie Srl
Address
Via Brunelli Maioni 23 Borgomanero

View All Listings by this Company

Print This Approval

#1904015

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904015
Expiry date:
30/04/2024
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating 10mm spigot end connections.
Marking:
Dornbracht Logo on body.
Installation Requirements:
R001 R006 R009 R010
Model:
33800760
Factor:
Aloys F Dornbracht GmbH & Co KG
Company Name
Aloys F Dornbracht GmbH & Co KG
Address
Koebbingser Muehle 6 D-58640 Iserlohn Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval

#1904361

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a single sequential cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904361
Expiry date:
30/04/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
I.Care on operating member.
Installation Requirements:
R001 R006 R010
Model:
1918: I.Care Doc M Mixer
Factor:
Balmoral London Limited
Company Name
Balmoral London Limited
Address
272 Regents Park Road London
Postcode
N3 3HN

View All Listings by this Company

Print This Approval

#1905309

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905309
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections
Marking:
Herz logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
SQ range: q10 & q12. Elite range: e10 & e12.
Factor:
Herz Valves UK Ltd
Company Name
Herz Valves UK Ltd
Address
Progress House, Moorfield Point, Moorfield Road
Postcode
GU1 1RU
Country
Slyfield Industrial Estate,
Phone
+44 1483 502211
General Email
sales@herzvalves.com

View All Listings by this Company
Manufacturer:
Herz DD
Company Name
Herz DD
Address
GRMASKA CESTA 3 1275 SMARTNO PRI LITIJI SLOVENIA
General Email

View All Listings by this Company

Print This Approval

#1905360

Range of two hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating ceramic cartridge headwork with single lever operating members. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905360
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Kohler on operating member
Installation Requirements:
R001 R006 R010
Model:
Loure DM 14675W-4-**. ‘**’ denotes finish and can be replaced by: CP – Polished chrome SN – Vibrant polished Nickel BN – Vibrant Brushed Nickel
Factor:
Kohler UK
Company Name
Kohler UK
Address
Cromwell Road Cheltenham GL52 5EP
Phone
+44 (0)1242 283790
General Email
info@kohler.co.uk

View All Listings by this Company

Print This Approval

#1905338

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905338
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
60148-5101
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1905329

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and some models are supplied with a pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905329
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Duravit on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
B31010 0010 10, B31010 0020 10, B31020 0010 10, B31020 0020 10, B31030 0010 10 & B31030 0020 10.
Factor:
Duravit AG
Company Name
Duravit AG
Address
Werderstrasse 36 78132 Hornberg Germany

View All Listings by this Company

Print This Approval

#1905365

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator & the product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 55°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905365
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
AV on body.
Installation Requirements:
R001 R006 R010
Model:
500267PEX0
Manufacturer:
Vicario Armando & C Srl
Company Name
Vicario Armando & C Srl
Address

View All Listings by this Company

Print This Approval

#1905372

‘Eurocube E’ wall mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlets incorporate a plastic aerator. Model 36.264.001 is an installation set intended for use with model 36.442. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905372
Expiry date:
31/05/2024
Size:
½” BSP (M)
Marking:
Grohe on face sensor plate
Installation Requirements:
R001 R040
Model:
Grohe ‘Eurocube E’ 36.442 & 36.264.001.
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval

#1905386

Opal Prime range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905386
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Jaquar on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
Opal Prime OPP-CHR-15005-BPM & OPP-CHR-15011-BPM
Factor:
Jaquar UK Ltd
Company Name
Jaquar UK Ltd
Address
Betchworth House 57-65 Station Road Redhill
Postcode
RH1 1DL
Country
Surrey
Phone
+44 844 807 2345

View All Listings by this Company
Manufacturer:
Jaquar UK Ltd
Company Name
Jaquar UK Ltd
Address
Betchworth House 57-65 Station Road Redhill
Postcode
RH1 1DL
Country
Surrey
Phone
+44 844 807 2345

View All Listings by this Company

Print This Approval

#1905027

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headworks with single lever operating member and waterfall type spout. The hose inlets incorporate a stainless-steel strainer and the product is supplied with a click type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905027
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” BSP captive nuts
Marking:
Lota on rear of body
Installation Requirements:
R001 R006 R009 R160
Model:
62915-7001
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1905055

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headworks with single lever operating member. The spout outlets incorporate a plastic flow straightener. Model B1811AA is supplied with a lever type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60 °C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905055
Expiry date:
31/05/2024
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided polyethylene lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Ideal Standard on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
B1811AA Ceraflex SL 1 hole basin mixer PUW, B1812AA Ceraflex SL 1 hole basin mixer no waste & B1959AA Ceraflex SL 1 hole bath filler
Factor:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval

#1905056

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905056
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
Stainless steel braided polyethylene lined hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Ideal Standard logo on top of operating member
Installation Requirements:
R001 R006 R009 R010
Model:
B1708AA Ceraflex Basin Mixer
Factor:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval

#1905067

Range of single hole, single outlet (fixed) combination tap assembly (various finishes), incorporating quarter turn (/L or /F models) or half turn (/H models) ceramic disc headworks. The spout outlets incorporate a plastic aerator. The product can be supplied with pop-up wastes. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905067
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Lefroy Brooks logo on underside of spout
Installation Requirements:
R001 R006 R010
Model:
XX1185/H, XX1188/H, XX1189/H. XX1185L, XX1188/L, XX1189/L. XX1185/F, XX1188/F, XX1189/F. ‘XX’ denotes finish and is replaced with CP - Polished Chrome NK - Polished Nickel BC - Brushed Chrome BN - Brushed Nickel PB - Polished Brass BPB - Brushed Brass AG - Antique Gold HRG - Hard Rubbed Gold CM - Champagne Gold BCM - Brushed Champagne Gold CO - Copper
Factor:
Lefroy Brooks Midland Ltd
Company Name
Lefroy Brooks Midland Ltd
Address
Unit 3 Marston Road Ind Est Marston Road Wolverhampton
Postcode
WV2 4LX
Country
West Midlands
Phone
01902 390893

View All Listings by this Company

Print This Approval

#1905079

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straighter with a stainless steel strainer or a plastic aerator (62314-7001 and 62461-7401 models only) or nothing (62333-5201 model). The product is supplied with a stainless steel strainer on each inlet hose, metal backnuts and either a click type waste or pop-up waste (6144-7001 and 62314-7001 models only). The inlet hoses of the 60144-7501 model are also supplied with an additional a plastic flow limiter, copper washer and a brass nut. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905079
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
LOTA on rear of body.
Installation Requirements:
R001 R006 R009 R010
Model:
60144-5101, 60144-5601, 60144-7001, 60144-7501, 60147-7301, 60811-5201, 60811-7201, 62314-7001, 62333-5201, 62461-7401, D6113-5301.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval

#1905301

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge with single lever operating members. The spout outlets incorporate a stainless-steel filter. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905301
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Xindong logo on operating member
Installation Requirements:
R001 R006 R010
Model:
T2302S & T2302L
Manufacturer:
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#1906904

single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type members. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste, supplied with a plastic flow regulator, intended for installation at the inlets. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906904
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
Marking:
SWAN LOGO (brand of wolseley) ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
C58106
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval

#1905014

Range of single hole, single outlet (fixed) combination taps (chromium plated brass or gold effect finish brass), incorporating rising spindle headworks and dome or cross top operating members. The spout outlet incorporates a plastic flow straightener. All models apart from the DCM113b model are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905014
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
15mm copper tails
Marking:
DTC 34 (Brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
DCM113, DCM113-501, DCM113b, WM DCM113B, SOLE113 & D50010012. MILAN113, WM MILAN113B, D50010032, TUD113 & TUD113/501 Models added February 2020: EBT20113 EBT13113 Model added January 2022: CAR MILAN113B
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#1906005

Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet of models 62636-5201, 62636-5101, 63028-5001, 63193-5001, 63197-5001 & 62635-5201 incorporate a plastic aerator. Models 62912-5001 & 62934-5001 incorporate a plastic flow regulator on the inlets. Model 60638-5001 incorporates a plastic flow regulator on the outlet of the ceramic cartridge headwork within the main tap body. The 62636-5101 model is supplied with a click type waste and a combined washer and stainless-steel strainer on each inlet hose. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906005
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
62636-5201, 62636-5101, 62912-5001, 62934-5001, 63028-5001, 63068-5001, 63193-5001, 63197-5001 & 62635-5201.
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1906010

Range of single hole, single outlet (fixed) combination tap assemblies (variety of finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906010
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hoses incorporating ½” BSP captive nut end connections.
Marking:
D & Dolphin on side of body or rear of operating member
Installation Requirements:
R001 R006 R010
Model:
DB1600xx Dolphin Blue & DB1650xx Dolphin Blue ‘xx’ denotes surface finish and can be replaced with any number between 00 & 99.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval

#1906071

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. Some models incorporate a plastic flow straightener or aerator at the outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906071
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut connections.
Marking:
Zhejiang Xindong company logo on operating member
Installation Requirements:
R001 R006 R010
Model:
T730002, T730002M, T730002L, T713002, T711002 & T711002H.
Manufacturer:
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#1906073

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks that control both flow and temperature with single lever operating members. The spout outlets incorporate plastic aerators and the products are supplied with a click type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906073
Expiry date:
30/06/2024
Note:
No testing performed on click type waste
Size:
Stainless Steel braided, EPDM lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DEVA on operating member.
Installation Requirements:
R001 R006 R010
Model:
ETH113 & ZON113 Model added September 2023: SVL113
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#1906074

Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906074
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies with 10mm spigot end connections.
Marking:
Dornbracht on body
Installation Requirements:
R001 R006 R009 R010
Model:
33537845, 33537846, 33500845, 33500846, 33506845, 33506846, 33521845, 33521846, 33526845, 33526846, 52000018, 52000019, 52000020, 52000021 & 52000022.
Factor:
Aloys F. Dornbracht GmbH & Co. KG
Company Name
Aloys F. Dornbracht GmbH & Co. KG
Address
Kobbingser Muhle 6 D-58640 Iserlohn
Country
Germany

View All Listings by this Company

Print This Approval

#1906081

Single hole, single outlet combination tap assembly (brass body, various finishes), incorporating a ceramic cartridge headwork, with a single lever operating member. The spout outlet incorporates a plastic aerator, (which from September 2019 has a reduced flow rate). The product is supplied with a ‘lever type’ pop-up waste. Maximum working pressure 5.0 Bar, Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906081
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
Stainless steel PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
SHS on underside of operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
V609-XX (basic model without lever). Controller options for this tap: V659-M-XX: Metal Lever V659-MB-XX: Metal Lever - Black Model with Lever control Numbers: V6K09M-XX: Basic model with Metal Lever option V6K09MB-XX: Basic model with Metal Lever (Black) option Models added September 2019: V609-45L-XX (basic model without lever 45L model). Controller options for this tap: V659-M-XX: Metal Lever V659-MB-XX: Metal Lever - Black Model with Lever control Numbers: V6K09-45LM-XX: Basic model with Metal Lever option V6K09-45LMB-XX: Basic model with Metal Lever (Black) option Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval

#1906082

Single hole, single outlet combination tap (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type, pop-up waste & metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906082
Expiry date:
30/06/2024
Note:
No testing on click type, pop-up waste.
Size:
Stainless steel braided, PEX hoses with a ½” "BSP captive nut.
Marking:
Lota on rear of body
Installation Requirements:
R001 R006 R009 R010
Model:
62643-7001
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1906107

Single hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate aplastic flow straightener. Model V108 is also supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906107
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies, with ½” captive nut.
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R006 R009 R010
Model:
V108-XX & V128-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Factor:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
info@samuel-heath.com

View All Listings by this Company

Print This Approval

#1906112

Single hole, single outlet (fixed) combination tap assembly (Various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a combined plastic aerator and flow restrictor. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906112
Expiry date:
30/06/2024
Size:
Stainless steel braided TPSiV lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Methven on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
TUBSS (Stainless Steel) - Turoa Basin Mixer Models added January 2020: TUBGD - Gold plated TUBGM - Gun Metal plated TUBGR - Graphite plated
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval

#1906345

Range of single hole, single outlet (fixed) combination tap assembllies (chromium plated brass). Incorporating a ceramic cartridge headworks, and single lever members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906345
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections
Marking:
HEWI on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
HEWI AQ 950 AQ1.12M10340 AQ1.12M10940 Model codes have now change June 2021: AQ1.12M103yy AQ1.12M10360-Fc. AQ1.12M109yy AQ1.12M10960-Fc. yy denotes surface finish of faucet 40 = chrome 60 = powder coating (colour options defined under -Fc.) XA = stainless steel finish -Fc. Denotes optional powder-coated surface finishes in combination with different lever options e.g. DC = matt black coloured.
Manufacturer:
Hewi Heinrich Wilke GmbH
Company Name
Hewi Heinrich Wilke GmbH
Address
Prof.-Bier-Straße 1-5 34454 Bad Arolsen
Country
Germany

View All Listings by this Company

Print This Approval

#1906349

HEWI OHM range of single hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. The HEWI AQ 800 K AQ1D12M10240-98 model has an active antimicrobial microsilver surface on the lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906349
Expiry date:
30/06/2024
Note:
Claims made by the manufacturer for antimicrobial properties have not been tested and are not considered part of the approval listing
Size:
Stainless steel braided PEX lined hose assembly incorporating ⅜” captive nut end connections
Marking:
HEWI logo on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
HEWI AQ 800: AQ1.12M10140, AQ1.12M10840. HEWI AQ 800 K: AQ1.12M10240-xx, AQ1B12M10240-xx. AQ1D12M10240-98. Models added August 2022 AQ1x12M110yy-Fb AQ1x12M11060-Fc Where xx denotes a colour code applied to the endcap and can be replaced by: 98 - Signal white, 99 - Pure white, 97 - Light grey, 95 - Stone grey, 92 - Anthracite grey, 90 - Jet black, 86 - Sand, 84 - Umber, 18 - Mustard yellow, 24 - Orange, 36 - Coral, 33 - Ruby red, 74 - Apple green, 72 - May green, 55 - Aqua blue, 50 - Steel blue Model codes have now change June 2021: AQ800 AQ1.12M101yy AQ1.12M10160-Fc. AQ1.12M108yy AQ1.12M10860-Fc. AQ800K AQ1x12M102yy-Fb. AQ1x12M10260-Fc. X denotes finish option of lever . = chrome, stainless steel or plastic shiny finish B = plastic matt finish D = plastic anibacterial shiny finish yy denotes surface finish of faucet 40 = chrome 60 = powder coating (colour options defined under -Fc.) XA = stainless steel finish -Fb. Defines different colour versions of plastic lever, e.g. 98 = signal white, 36 = coral, etc. -Fc. Defines optional powder-coated surface finishes in combination with different lever options. e.g. DC = matt black coloured.
Manufacturer:
Hewi Heinrich Wilke GmbH
Company Name
Hewi Heinrich Wilke GmbH
Address
Prof.-Bier-Straße 1-5 34454 Bad Arolsen
Country
Germany

View All Listings by this Company

Print This Approval

#1906352

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate a combined washer and stainless steel strainer. The 60147-7101 model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906352
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
60147-7101 (chrome finish), 60147-7201 (chrome finish), 60147-7204 (BN PVD finish).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval

#1906905

Single hole, single outlet fixed combination tap assembly (Chrome plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure - 10.0 bar. Maximum operating temperature - 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906905
Expiry date:
30/06/2024
Size:
15mm copper tails
Marking:
Bristan etching on body
Installation Requirements:
R001 R006 R010
Model:
AR2 THLBAS C
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1906906

Range of single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator (WM SLE BASNW3.5 C) or plastic flow straightener (WM RYL BASNW4.5 C) Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906906
Expiry date:
30/06/2024
Size:
PVC flexible unbraided hose assembly with 15mm push fit end connections
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
WM SLE BASNW3.5 C, WM RYL BASNW4.5 C,
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1905337

Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905337
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut connections
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
60128-5001
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1906319

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 10.0 bar. The T8102M & T9202 models incorporate a plastic flow straightener and have a maximum operating temperature of 60°C. Models T99002M, T9902, T9902L have a maximum operating temperature of 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906319
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Xindong logo on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
T8102M, T9902M, T9902, T9902L & T9202
Manufacturer:
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#1906320

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906320
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Xindong logo on operating member
Installation Requirements:
R001 R006 R010
Model:
T8102 & T8302
Manufacturer:
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#1907015

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a single sequential cartridge that controls both the flow and temperature with a single lever operating member. The spout outlets incorporate a plastic flow straightener. All products are supplied with a plastic strainer and a servicing valve, x2 EPDM ‘O’-rings, brass adaptor, plastic flow regulator and brass flow regulator holder for installation on each inlet tail. The models ending in 610/610L are supplied with copper tails and an additional olive. All other models are supplied with stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections and an additional fibre washer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907015
Expiry date:
31/07/2024
Size:
½” BSP (M) (to servicing valve)
Marking:
Delabie on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
Securitherm H9600, H9600610, H9600610L, H960015 & H960015L. Securitherm Bioclip H9605, H9605610, H9605610L, H960515 & H960515L
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval

#1907027

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic cartridge headworks with dome type operating member. The spout outlet incorporates a plastic aerator. The product is supplied with an optional plastic flow straightener & pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907027
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating 15mm compression end connections
Marking:
Ideal Standard Logo on operating member
Installation Requirements:
R001 R006 R010
Model:
B9673AA Alto Dual Control Basin Mixer
Factor:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval

#1907904

Single hole single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907904
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined flexible hose assembly with 15mm compression end connections
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
RGL CAP BASNW C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#1907907

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge or quarter turn ceramic disc headwork with either a single lever or cross top operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907907
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
Marking:
Cascade on body or operating member
Installation Requirements:
R001 R006 R010
Model:
002.2119.3, 004.2119.3, 005.2119.3, 007.2119.3 & 008.2119.3
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1907909

Single hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907909
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined flexible hose assembly with 15mm compression end connections
Marking:
Cascade on operating member
Installation Requirements:
R001 R006 R010
Model:
001.2119.3
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1907342

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic flow straightener and stainless steel strainer. The 7001 suffix models are supplied with a click type waste. The inlet hoses include a combined washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907342
Expiry date:
31/07/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
62628-5001 62628-7001 62646-7001 62646-5001
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval

#1907353

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907353
Expiry date:
31/07/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
46 020 xx0 AXOR Edge 46 021 xx0 AXOR Edge Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval

#1907354

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907354
Expiry date:
31/07/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
46 010 xxx AXOR 46 011 xxx AXOR 46 030 xxx AXOR 46 031 xxx AXOR Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval

#1907355

Range of floor mounted, single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907355
Expiry date:
31/07/2024
Note:
10 452 180 AXOR Starck basic set floor standing is not approved in its own right.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR logo on body
Installation Requirements:
R001 R010 R040
Model:
10 452 180 AXOR Starck basic set floor standing to be installed in conjunction with: 46 040 xxx AXOR Edge Single lever basin mixer floor standing with push-open waste set 46 041 xxx AXOR Edge Single lever basin mixer floor standing with push-open waste set - diamond cut Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 12

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.