Range of single hole, single outlet (fixed) combination tap assembllies (chromium plated brass). Incorporating a ceramic cartridge headworks, and single lever members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1906345

Expiry date:

30/06/2024

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections

Marking:

HEWI on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

HEWI AQ 950 AQ1.12M10340 AQ1.12M10940 Model codes have now change June 2021: AQ1.12M103yy AQ1.12M10360-Fc. AQ1.12M109yy AQ1.12M10960-Fc. yy denotes surface finish of faucet 40 = chrome 60 = powder coating (colour options defined under -Fc.) XA = stainless steel finish -Fc. Denotes optional powder-coated surface finishes in combination with different lever options e.g. DC = matt black coloured.

Manufacturer:

Hewi Heinrich Wilke GmbH

Company Name

Hewi Heinrich Wilke GmbH

Address

Prof.-Bier-Straße 1-5 34454 Bad Arolsen

View All Listings by this Company

HEWI OHM range of single hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. The HEWI AQ 800 K AQ1D12M10240-98 model has an active antimicrobial microsilver surface on the lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1906349

Expiry date:

30/06/2024

Note:

Claims made by the manufacturer for antimicrobial properties have not been tested and are not considered part of the approval listing

Size:

Stainless steel braided PEX lined hose assembly incorporating ⅜” captive nut end connections

Marking:

HEWI logo on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

HEWI AQ 800: AQ1.12M10140, AQ1.12M10840. HEWI AQ 800 K: AQ1.12M10240-xx, AQ1B12M10240-xx. AQ1D12M10240-98. Models added August 2022 AQ1x12M110yy-Fb AQ1x12M11060-Fc Where xx denotes a colour code applied to the endcap and can be replaced by: 98 - Signal white, 99 - Pure white, 97 - Light grey, 95 - Stone grey, 92 - Anthracite grey, 90 - Jet black, 86 - Sand, 84 - Umber, 18 - Mustard yellow, 24 - Orange, 36 - Coral, 33 - Ruby red, 74 - Apple green, 72 - May green, 55 - Aqua blue, 50 - Steel blue Model codes have now change June 2021: AQ800 AQ1.12M101yy AQ1.12M10160-Fc. AQ1.12M108yy AQ1.12M10860-Fc. AQ800K AQ1x12M102yy-Fb. AQ1x12M10260-Fc. X denotes finish option of lever . = chrome, stainless steel or plastic shiny finish B = plastic matt finish D = plastic anibacterial shiny finish yy denotes surface finish of faucet 40 = chrome 60 = powder coating (colour options defined under -Fc.) XA = stainless steel finish -Fb. Defines different colour versions of plastic lever, e.g. 98 = signal white, 36 = coral, etc. -Fc. Defines optional powder-coated surface finishes in combination with different lever options. e.g. DC = matt black coloured.

Manufacturer:

Hewi Heinrich Wilke GmbH

Company Name

Hewi Heinrich Wilke GmbH

Address

Prof.-Bier-Straße 1-5 34454 Bad Arolsen

View All Listings by this Company

Range of single hole, single outlet, fixed electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate adjustable combined plastic and rubber aerators and the inlets incorporate plastic strainers. Temperature can be set via an access point on the side of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

1907319

Expiry date:

31/07/2024

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” end connections.

Marking:

HEWI logo on body.

Installation Requirements:

R001 R006 R009 R010 R570

Model:

HEWI SENSROIC Range: HEWI AQ 800 – AQ1.12S20040 (240v supply) HEWI AQ 800 – AQ1.12S20140 (battery) HEWI AQ 950 – AQ1.12S21040 (240v supply) HEWI AQ 950 – AQ1.12S21140 (battery) Model codes have changed from June 2021: AQ1.12S200yy AQ1.12S20060-Fc. AQ1.12S201yy AQ1.12S20160-Fc. AQ1.12S210yy AQ1.12S21060-Fc. AQ1.12S211yy AQ1.12S21160-Fc. yy denotes surface finish of faucet 40 = chrome 60 = powder coating (colour options defined under -Fc.) XA = stainless steel finish -Fc. Denotes optional powder-coated surface finishes in combination with different lever options e.g. DC = matt black coloured.

Manufacturer:

Hewi Heinrich Wilke GmbH

Company Name

Hewi Heinrich Wilke GmbH

Address

Prof.-Bier-Straße 1-5 34454 Bad Arolsen

View All Listings by this Company

Range of single hole, single outlet, fixed electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate plastic aerators and the inlets incorporate plastic strainers. Temperature can be set via an access point on the side of the valve. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

1907320

Expiry date:

31/07/2024

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” end connections.

Marking:

HEWI logo on body.

Installation Requirements:

R001 R006 R009 R010 R570

Model:

HEWI SENSROIC Range: HEWI AQ 477/801 – AQ1.12S22040 (240v supply) HEWI AQ 477/801 – AQ1.12S22140 (battery) HEWI AQ 162 – AQ1.12S23040 (240v supply) HEWI AQ 162 – AQ1.12S23140 (battery) Product will change to the following codes June 2021: AQ1.12S220yy AQ1.12S22060-Fc AQ1.12S221yy AQ1.12S22160-Fc AQ1.12S230yy AQ1.12S23060-Fc AQ1.12S231yy AQ1.12S23160-Fc yy defines surface finish and can be replaced with: 40 - Chrome 60 - Powder coating (colour options defined under - Fc) XA - Stainless steel finish Fc denotes optional powder coated surface finishes in combination with different lever options, e.g. DC - matt black coloured.

Manufacturer:

Hewi Heinrich Wilke GmbH

Company Name

Hewi Heinrich Wilke GmbH

Address

Prof.-Bier-Straße 1-5 34454 Bad Arolsen

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies having brass bodies (various finishes). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001304

Expiry date:

31/01/2025

Size:

Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

HEWI logo on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

AQ1.12M10540, AQ1.12M10440-xx, AQ1B12M10640-xx. AQ1D12M10640-98. Where xx denotes a colour code applied to the endcap and can be replaced by: 98 - Signal white, 99 - Pure white, 97 - Light grey, 95 - Stone grey, 92 - Anthracite grey, 90 - Jet black, 86 - Sand, 84 - Umber, 18 - Mustard yellow, 24 - Orange, 36 - Coral, 33 - Ruby red, 74 - Apple green, 72 - May green, 55 - Aqua blue, 50 - Steel blue Model codes have now change June 2021: AQ1.12M104yy AQ1.12M10460-Fc AQ1.12M105yy AQ1.12M10560-Fc AQ1x12M106yy-Fb AQ1x12M10660-Fc x denotes finish option for operating member and can be replaced with; . - Chrome, Stainless steel or plastic finish B - Plastic matt finish D - Plastic anibacterial shiny finish yy denotes surface finish and can be replaced with: 40 - Chrome 60 - Powder coating (colour options defined under -Fc) XA - Stainless steel finish Fc denotes optional powder coated surface finishes in combination with different lever options, e.g. DC - matt black coloured. Fb denotes the different colour versions of the plastic lever, e.g. 98 - Signal white 36 - Coral

Manufacturer:

Hewi Heinrich Wilke GmbH

Company Name

Hewi Heinrich Wilke GmbH

Address

Prof.-Bier-Straße 1-5 34454 Bad Arolsen

View All Listings by this Company