Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2305343

Size:

see model

Marking:

EN1254-2 & size on nut. HonSon logo (ISI) on fitting body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HS100-001 Equal Straight: HS100-001-01 8×8, HS100-001-02 10×10, HS100-001-03 12×12, HS100-001-04 14×14, HS100-001-05 15×15, HS100-001-06 16×16, HS100-001-07 18×18, HS100-001-08 22×22, HS100-001-09 28×28, HS100-001-13 15×15 (82mm length), HS100-001-14 22×22 (82mm length). HS100-002 Reducing Straight: HS100-002-01 10×8, HS100-002-02 12×8, HS100-002-03 12×10, HS100-002-04 15×8, HS100-002-05 15×10, HS100-002-06 15×12, HS100-002-07 18×15, HS100-002-08 22×15, HS100-002-09 22×18, HS100-002-10 28×15, HS100-002-11 28×22. HS100-003 Female Straight: HS100-003-01 8×1/4" F, HS100-003-02 8×3/8" F, HS100-003-03 10×1/4" F, HS100-003-04 10×3/8" F, HS100-003-05 10×1/2" F, HS100-003-06 12×3/8" F, HS100-003-07 12×1/2" F, HS100-003-08 14×3/8" F, HS100-003-09 14×1/2" F, HS100-003-10 15×1/4" F, HS100-003-11 15×3/8" F, HS100-003-12 15×1/2" F, HS100-003-13 15×3/4" F, HS100-003-14 15×1" F, HS100-003-15 16×1/2"F, HS100-003-16 16×3/4" F, HS100-003-17 18×1/2" F, HS100-003-18 18×3/4" F, HS100-003-19 22×1/2" F, HS100-003-20 22×3/4" F, HS100-003-21 22×1" F, HS100-003-22 28×3/4" F, HS100-003-23 28×1" F. HS100-004 Male Straight: HS100-004-01 8×1/8"M, HS100-004-02 8×1/4"M, HS100-004-03 8×3/8"M, HS100-004-04 8×1/2"M, HS100-004-05 10×1/4"M, HS100-004-06 10×3/8"M, HS100-004-07 10×1/2"M, HS100-004-08 12×3/8"M, HS100-004-09 12×1/2"M, HS100-004-10 14×3/8"M, HS100-004-11 14×1/2"M, HS100-004-12 14×3/4"M, HS100-004-13 15×1/4"M, HS100-004-14 15×3/8"M, HS100-004-15 15×1/2"M, HS100-004-16 15×3/4"M, HS100-004-17 16×1/2"M, HS100-004-18 16×3/4"M, HS100-004-19 18×1/2"M, HS100-004-20 18×3/4"M, HS100-004-21 22×1/2"M, HS100-004-22 22×3/4"M, HS100-004-23 22×1"M, HS100-004-24 22×1 1/4"M, HS100-004-25 28×3/4"M, HS100-004-26 28×1"M. HS100-005 Equal Elbow HS100-005-01 8×8, HS100-005-02 10×10, HS100-005-03 12×12, HS100-005-04 14×14, HS100-005-05 15×15, HS100-005-06 16×16, HS100-005-07 18×18, HS100-005-09 22×22, HS100-005-11 28×28. HS100-006 Female Elbow: HS100-006-01 8×1/4"F, HS100-006-02 10×3/8"F, HS100-006-03 12×1/2"F, HS100-006-04 14×1/2"F, HS100-006-05 15×1/2"F, HS100-006-06 15×3/4"F, HS100-006-07 16×1/2"F, HS100-006-08 18×1/2"F, HS100-006-09 18×3/4"F, HS100-006-10 22×1/2"F, HS100-006-11 22×3/4"F, HS100-006-12 22×1"F, HS100-006-13 28×1"F. HS100-007 Male Elbow: HS100-007-01 8×1/4"M, HS100-007-02 10×1/4"M, HS100-007-03 10×3/8"M, HS100-007-04 12×1/2"M, HS100-007-05 14×1/2"M, HS100-007-06 15×1/4"M, HS100-007-07 15×3/8"M, HS100-007-08 15×1/2"M, HS100-007-09 15×3/4"M, HS100-007-10 16×1/2"M, HS100-007-11 18×1/2"M, HS100-007-12 18×3/4"M, HS100-007-13 22×1/2"M, HS100-007-14 22×3/4"M, HS100-007-15 22×1"M, HS100-007-16 28×1"M. HS100-008 Equal Tee: HS100-008-01 8×8×8, HS100-008-02 10×10×10, HS100-008-03 12×12×12, HS100-008-04 14×14×14, HS100-008-05 15×15×15, HS100-008-06 16×16×16, HS100-008-07 18×18×18, HS100-008-08 22×22×22, HS100-008-09 28×28×28. HS100-009 Reducing Tee: HS100-009-01 15×15×22, HS100-009-02 18×18×15, HS100-009-03 18×15×18, HS100-009-04 22×15×15, HS100-009-05 22×15×22, HS100-009-06 22×22×15, HS100-009-07 22×22×18, HS100-009-08 28×22×15, HS100-009-09 28×28×15, HS100-009-10 28×15×28, HS100-009-11 28×22×22, HS100-009-12 28×28×22, HS100-009-13 28×22×28. HS100-010 Female Tee: HS100-010-01 12×1/2“F, HS100-010-03 15×1/2“F, HS100-010-05 18×1/2“F, HS100-010-06 18×3/4“F, HS100-010-07 22×1/2”F, HS100-010-08 22×3/4”F, HS100-010-09 28×1/2”F, HS100-010-10 28×3/4”F, HS100-010-11 28×1”F. HS100-011 Wallplate Elbow: HS100-011-01 12×1/2"F, HS100-011-02 14×1/2"F, HS100-011-03 15×1/2"F, HS100-011-05 18×1/2"F, HS100-011-06 18×3/4"F, HS100-011-07 22×1/2"F, HS100-011-08 22×3/4"F. HS100-012 Water Tank Connector : HS100-012-01 15, HS100-012-02 22, HS100-012-03 28. HS100-013 Stop End: HS100-013-01 8, HS100-013-02 10, HS100-013-03 12, HS100-013-04 15, HS100-013-05 18, HS100-013-06 22, HS100-013-07 28. HS100-014 Str Tap Connector: HS100-014-01 15×1/2"F, HS100-014-02 15×3/4"F, HS100-014-03 22×3/4"F. HS100-015 Bent Tap Connector: HS100-015-01 15×1/2"F, HS100-015-02 22×3/4"F. HS100-016 Crossover Bridge: HS100-016-01 15×15, HS100-016-02 18×18, HS100-016-03 22×22. HS100-017 Reduced Riece: HS100-017-01 15×8, HS100-017-02 15×10, HS100-017-03 22×15, HS100-017-04 28×15, HS100-017-05 28×22. HS100-018 3 Part Reduced Set: HS100-018-01 10×8, HS100-018-02 12×8, HS100-018-03 15×8, HS100-018-04 15×10, HS100-018-05 15×12, HS100-018-06 22×15, HS100-018-07 28×15, HS100-018-08 28×22. HS100-019 Water Tank Connector: HS100-019-01 15×1/2"M, HS100-019-02 22×3/4"M, HS100-019-03 28×1"M. HS100-020 45 Degree Elbow: HS100-020-01 15×15, HS100-020-02 22×22, HS100-020-03 28×28.

Approval Holder:

Wenling Honson Brassware Co., Ltd

Company Name

Wenling Honson Brassware Co., Ltd

Address

Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515

Country

China

View All Listings by this Company

Manufacturer:

Wenling Honson Brassware Co., Ltd

Company Name

Wenling Honson Brassware Co., Ltd

Address

Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515

Country

China

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208822

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

Lawton Tubes Log & size on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

N12015 CORE 15MM X 90 DEGREE ELBOW EF N12022 CORE 22MM X 90 DEGREE ELBOW EF N24015 CORE 15MM EQUAL TEE EF N1015 CORE 15MM COUPLER EF N1022 CORE 22MM COUPLER EF N12028 CORE 28MM X 90 DEGREE ELBOW EF N6022015 CORE 22MM X 15MM FITTING REDUCER EF N24022 CORE 22MM EQUAL TEE EF N25022015 CORE 22MM X 22MM X 15MM REDUCER TEE EF N12S015 CORE 15MM X 90 DEGREE STREET ELBOW EF N1028 CORE 28MM COUPLER EF N61015 CORE 15MM END CAP EF N6028022 CORE 28MM X 22MM FITTING REDUCER EF N26022015022 CORE 22MM X 15MM X 22MM REDUCER TEE EF N12035 CORE 35MM X 90 DEGREE ELBOW EF N12S022 CORE 22MM X 90 DEGREE STREET ELBOW EF

Approval Holder:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Coventry

Postcode

CV4 9AB

Country

United Kingdom

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

mlis@lawtontubes.co.uk

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of single and dual flush WC outlet valves. The valves incorporate an internal overflow and are operated with one push button (single flush) or two push buttons (dual flush). Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2306054

Size:

C211 & C212 - 2” BSP (M). C231 - 1 1/2" or 2" BSP (M).

Marking:

Nuca logo, CE, Model on body

Installation Requirements:

R001 R571 R581

Expiry date:

30/06/2028

Model:

C211 C212 C231

Approval Holder:

Compas (Xiamen) Plumbing Technology Co, Ltd

Company Name

Compas (Xiamen) Plumbing Technology Co, Ltd

Address

No.46 Xingxi Road Jimei District Xiamen

Country

Fujian

View All Listings by this Company

Manufacturer:

Compas (Xiamen) Plumbing Technology Co, Ltd

Company Name

Compas (Xiamen) Plumbing Technology Co, Ltd

Address

No.46 Xingxi Road Jimei District Xiamen

Country

Fujian

View All Listings by this Company

Range of stainless-steel plate heat exchangers. Maximum working pressure 10 bar. Maximum operating temperature 90°C.

Section:

1350 Heat Exchangers

Size:

17.05mm hole primary & 10.55mm hole secondary.

Marking:

'Original Quality' symbol (registered trade-mark of Bosch) and technical information on body.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

C-PHE 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 & 32.

Approval Holder:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi

Postcode

45030 Manisa,

Country

Turkey

Phone

0090 236 226 1366

General Email

gulsah.colak@tr.bosch.com

View All Listings by this Company

Manufacturer:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi

Postcode

45030 Manisa,

Country

Turkey

Phone

0090 236 226 1366

General Email

gulsah.colak@tr.bosch.com

View All Listings by this Company

Range of electromagnetic water meters with rubber lined carbon steel bodies. Maximum working pressure 16.0 Bar. Maximum operating temperature 23.0°C.

Section:

1505 Water Meters

Size:

DN25 to 200 flanged.

Marking:

Badger logo, serial number, Size, Flow arrow on adhesive label.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

M1000 – DN25, 32, 40, 50, 65, 80, 100, 125, 150 & 200. M2000 – DN25, 32, 40, 50, 65, 80, 100, 125, 150 & 200. M5000 – DN25, 32, 40, 50, 65, 80, 100, 125, 150 & 200.

Approval Holder:

Badger Meter Inc.

Company Name

Badger Meter Inc.

Address

4545 W Brown Deer Road, Milwaukee WI

Postcode

53223

Country

United States

Phone

+1 414 371 5941

General Email

rschultz@badgermeter.com

View All Listings by this Company

Manufacturer:

Badger Meter Inc.

Company Name

Badger Meter Inc.

Address

4545 W Brown Deer Road, Milwaukee WI

Postcode

53223

Country

United States

Phone

+1 414 371 5941

General Email

rschultz@badgermeter.com

View All Listings by this Company

Range of single or manifold below ground meter boxes. The boxes incorporate a concentric water meter manifold and a servicing valve on each connection. CV models incorporate an approved single check valve cartridge and the DCV model incorporates two approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The pushfit inlet and outlet connections are supplied with pipe inserts and are for use with MDPE pipe (manufactured to EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

20mm, 25mm, 32mm.

Marking:

Talis, Talbot (brand of Atlantic Plastics Ltd), batch clock and recycle code on body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Matrix Manifold (CV) with PF inlet and outlet, Matrix Manifold (DCV) with PF inlet and outlet, Matrix Manifold (CV) 4 inlets x 4 outlets 25mm, Matrix Manifold (CV) 6 inlets x 6 outlets 25mm.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Talbot Modular Manifold System with and without concentric water meter connections with plastic bodies incorporating screw down stopvalves. Maximum working pressure 16 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

see model

Marking:

Talbot (brand of Atlantic Plastics Ltd.) on manifold body.

Installation Requirements:

R001 R120

Expiry date:

30/04/2028

Model:

2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet and concentric connection x 25mm PE outlet E3707, MANIF 2 PF 50 X 25MM E3708, MANIF 3 PF 50 X 25MM E3709, MANIF 4 PF 50 X 25MM E3710, MANIF 5 PF 50 X 25MM E3711, MANIF 6 PF 50 X 25MM E3712, MANIF 7 PF 50 X 25MM E3713, MANIF 8 PF 50 X 25MM E3714 MANIF 9 PF 50 X 25MM E3715, MANIF 10 PF 50 X 25MM E3716, MANIF 11 PF 50 X 25MM E3717 MANIF 12 PF 50 X 25MM E3718, MANIF 2 PF 63 X 25MM E3719, MANIF 3 PF 63 X 25MM E3720, MANIF 4 PF 63 X 25MM E3721 MANIF 5 PF 63 X 25MM E3722, MANIF 6 PF 63 X 25MM E3723, MANIF 7 PF 63 X 25MM E3724, MANIF 8 PF 63 X 25MM E3725 MANIF 9 PF 63 X 25MM E3726, MANIF 10 PF 63 X 25MM E3727, MANIF 11 PF 63 X 25MM E3728 MANIF 12 PF 63 X 25MM Talbot Modular Manifold System 2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet x ¾” BSP; 25mm outlets E3751 MANIF 2 PF 50 X 25MM E3752 MANIF 3 PF 50 X 25MM E3753 MANIF 4 PF 50 X 25MM E3754 MANIF 5 PF 50 X 25MM E3755 MANIF 6 PF 50 X 25MM E3756 MANIF 7 PF 50 X 25MM E3757 MANIF 8 PF 50 X 25MM E3758 MANIF 9 PF 50 X 25MM E3759 MANIF 10 PF 50 X 25MM E3760 MANIF 11 PF 50 X 25MM E3761 MANIF 12 PF 50 X 25MM E3762 MANIF 2 PF 63 X 25MM E3763 MANIF 3 PF 63 X 25MM E3764 MANIF 4 PF 63 X 25MM E3765 MANIF 5 PF 63 X 25MM E3766 MANIF 6 PF 63 X 25MM E3767 MANIF 7 PF 63 X 25MM E3768 MANIF 8 PF 63 X 25MM E3769 MANIF 9 PF 63 X 25MM E3770 MANIF 10 PF 63 X 25MM E3771 MANIF 11 PF 63 X 25MM E3772 MANIF 12 PF 63 X 25MM

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of level and flow transmitters with plastic bodies. Maximum working pressure 3.0Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

Size:

1 ½” BSP (M) 1 ½” NPT (M)

Marking:

EMERSON Rosemount logo, model number and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

Rosemount 1208A Rosemount 1208C

Approval Holder:

Rosemount Tank Radar AB

Company Name

Rosemount Tank Radar AB

Address

Layoutvägen 1, 43533 Mölnlycke Sweden

View All Listings by this Company

Range of multistage pumps (VL, VLE and CL series) and submersible pumps (VN, VNE CN, ES and CS series) with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Maximum working pressure 15.0 bar (VL, VLE and CL series pumps only).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303041

Note:

VN, VNE, CN, ES and CS series submersible pumps: The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.

Size:

VL, VLE and CL series: 1 ¼” Female BSP inlet x 1 ½” Female BSP outlet. VN, VNE and CN series: 1 ¼” Female BSP outlet - 2" Female BSP outlet. ES and CS series: 1 ¼” Female BSP outlet.

Marking:

Franklin electric Srl logo, WRAS, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

Existing: VNx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CN/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, VLx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CL/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: VN, CN, VL, CL, ES, CS = Series name. VN/VL/ES series “E-TECH” brand, CN/CL/CS Series “FPS” brand. x1 = Nominal Flow: 3, 5, or 9. (9 is not available on ES and CS models) xx2 = number of impellers, (depending on Nominal Flow and Frequency): 2 to 10 (VN/CN & VL/CL models), 2 to 8 (ES/CS models). I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply (no phase): T: three phase, M: single phase. x5 = Frequency (Hz): 5: 50 Hz, 6: 60 Hz. x6 = Motor Configuration: L: Bi-phase, 90° single-phase, D: Three-phase, triangle), Y: Three-phase, star. N = Mechanical seal elastomer: N: NBR. x7 = Mechanical Seal surface: 1: Graphite/Silicon Carbide, 2: Silicon Carbide/Silicon Carbide. x8 = Float Switch: 0: without. B = Cable type: B: Blue. x9 = Cable size: A: 4G1, B: 4G1.5, C: 3G1, D: 3G1.5. x10 = Cable length: O: 20m (VN/CN and ES/CS models), E: 5m (VL/CS models). x11 = Control Panel (not in contact with liquid): 0: without), 1: connected (VN/CN models only). N = Nude terminal (not in contact with liquid). x12 = Option (only on VN/CN models) - Discharge head (”): Empty: 1¼” Nickel plated brass, I: 1¼” Inox, J: 2” Inox. D = Drinking water approved. -------------------------------------------- From November 2025 VNE and VLE models added + new naming structure as follows: VN or VNEx1/xx2 x3xxx4 x5x6x7 x8 xxx9Bx10x11xxx12, VL or VLE x1/xx2 x3xxx4 x5x6x7 x8 xxx9Bx10x11xxx12. Where: VN, VNE, VL, VLE = Series name. VN/VNE/VL/VLE series “Franklin Electric” brand. x1 = Nominal Flow: 3, 5, or 9 (VN and VL series). 3, 6, or 10 (VNE and VLE series). xx2 = number of impellers, (depending on Nominal Flow and Frequency): 2 to 10. x3 = Suction: S: Screened (submersible application), I: Inline (for surface dry application). xxx4 = Motor Power (kW x 10): 005, 007, 009, 011… x5 = Supply: T: three phase, M: single phase. x6 = Frequency (Hz): 5: 50 Hz, 6: 60 Hz. x7 = Voltage: 1: 115V, 2: 230V, 3: 280V, 4: 460V. x8 = Float Switch: 0: without. xxx9 - Mechanical seal: QQP: Silicon Carbide/Silicon Carbide/NBR. B = Cable type: B: Blue. x10 = Cable length: 05: 5m (VL/VNE/VLE models), 20: 20m (VN/VNE models). x11 = Plug: (“Blank”) Without plug. x12 = Discharge head dimension: R14: Rp 1¼” thread (Inox), R20: Rp 2” thread (Inox) (VN/VNE models only). -------------------------------------------- ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: ES, CS = Series name. ES series “E-TECH” brand, CS Series “FPS” brand. x1 = Nominal Flow: 3 or 5. xx2 = number of impellers, (depending on Nominal Flow and Frequency): 2 to 8. I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply: T: three phase, M: single phase. x5 = Frequency (Hz): 5: 50 Hz, 6: 60 Hz. x6 = Motor Configuration: L: Bi-phase, 90° single-phase, D: Three-phase, triangle, Y: Three-phase, star. N = Mechanical seal elastomer: N: NBR. x7 = Mechanical Seal surface: 1: Graphite/Silicon Carbide, 2: Silicon Carbide/Silicon Carbide. x8 = Float Switch: 0: without. B = Cable type: B: Blue. x9 = Cable size: A: 4G1, B: 4G1.5, C: 3G1, D: 3G1.5. x10 = Cable length: O: 20m. x11 = Control Panel (not in contact with liquid): 0: without. N = Nude terminal (not in contact with liquid). D = Drinking water approved.

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company