Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2111390

Size:

½” BSP (M)

Marking:

Ideal Standard on Adhesive below insert within cistern: 6L waterline within cistern.

Installation Requirements:

R001 R556

Expiry date:

30/11/2026

Model:

R031767 Prosys 120 WC cistern Mech CL2 6L & R031867 Prosys 120 WC cistern Pneu CL2 6L

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of in-line single check valve assemblies consisting of a spring loaded resilient trim check valve cartridge housed within a DZR brass body. For use with copper pipe manufactured to EN1057. Maximum working pressure 10.0 bar. Model 12.10322.015.CP5R-8511 has a maximum operating temperature of 65°C. Model 12.10322.022.CP5R-8511 has a maximum operating temperature of 85°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

240204710

Size:

15mm compression & 22mm compression

Marking:

V&G, size, WRAS, date of manufacture (MM/YY), flow arrow & CR on body. EN1254-2, size: on compression nut.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

12.10322.015.CP5R-8511 – 15mm compression. 12.10322.022.CP5R-8511 – 22mm compression. Added in July 2024 12.10312.028.CP5R-8511 - 28MM Compression

Approval Holder:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Thermostatic cartridge with NBR ‘O’-rings for insertion into specifically dimensioned bores. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.

Section:

0442 Thermostatic cartridges

Section Subtitle:

Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

WRAS Approval Number:

240404005

Size:

see model

Marking:

Glamour logo on cartridge

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

GH35F-* “*” =10-59, denotes the length of stem 10-59mm (34.9mmOD) GH35T-* “*” =10-17, denotes the length of stem 10-17mm (29.5mmOD) GH25T-* “*” =10-14, denotes the length of stem 10-14mm (22.6mmOD) GH30F-* “*” =10-12, denotes the length of stem 10-12mm (29.5mmOD)

Approval Holder:

Kaiping Glamour Tap Component Co. Ltd.

Company Name

Kaiping Glamour Tap Component Co. Ltd.

Address

Building D2, No. 1, 2nd Xihu Road, Cuishanhu New District

Country

Kaiping City,

View All Listings by this Company

Manufacturer:

Kaiping Glamour Tap Component Co. Ltd.

Company Name

Kaiping Glamour Tap Component Co. Ltd.

Address

Building D2, No. 1, 2nd Xihu Road, Cuishanhu New District

Country

Kaiping City,

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate either a plastic aerator or flow straightener (see models) Model: 62783-7301, the inlets incorporate a plastic flow regulator. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240102039

Note:

Models 62783 -7301 & 62793 – 7301 are supplied with a lever type pop up waste not verified by test. All other models are supplied with a click type waste verified by test.

Size:

Stainless Steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Lota on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2029

Model:

62334-5201 62635-5101 Flow straightener 62783-7301 62900-7101 Flow straightener 62903-7201 Aerator 62906-7001 Flow straightener 62906-7101 Flow straightener 62912-7001 62934-7001 62936-7001 Flow straightener 62936-7101 Flow straightener 62938-7001 Flow straightener

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets of F9406M and F9406M-** incorporate a plastic aerator. F8122B, F8122B-**: Maximum working pressure - 5.0 Bar. Maximum operating temperature 85°C. F9406M, F9406M-**: Maximum working pressure - 10.0 Bar.Maximum operating temperature 65.0°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240104001

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Lanbiao on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2029

Model:

F8122B F8122B-** F9406M F9406M-** F8122B and F9406M are chrome plated Where ** = Alternative surface finishes: H = Black N = Nickel Brushed GJS = Zirconium gold brushed G = Zirconium gold QTSL = Brushed bronze bright QTS = Brushed Bronze Matte TJ = Titanium gold TJLS = Titanium gold brushed MGJ = Rose gold MGJL = Rose gold brushed HGT = Red bronze HTL = Brushed brass HTS = Red bronze brushed PVDQH = Gun Ash HQ = Gun Ash Brushed Q = Bronze DYB = Electrophoresis Matt White STS = Acid copper brushed BZ = Spray pearl white DMGJ = Light Rose Gold brushed

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Manufacturer:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Range of deck mounted single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate plastic aerators, flow straighteners, stainless steel strainers or open outlet type spouts (see models). Some models are supplied with a click type pop-up wastes, that have been verified by test (see models). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240402043

Size:

Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

LOTA logo on tap body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2029

Model:

D6113-5301 (Flow straightener / strainer / Click Waste), 62333-5201 (Open Outlet / Click Waste), 60811-5201 (Flow straightener / strainer / Click Waste), 62314-7001 (Aerator / Click Waste), 62461-7401 (flow straightener / Click Waste), 62635-5201 (Aerator), 62636-5201 (Aerator), 62912-5001 (Open Outlet), 62934-5001 (Open Outlet), 63197-5001 (Aerator), 63068-5001 (Open Outlet).

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating either ceramic cartridge, ¼ turn ceramic disc or non-rising spindle headworks, with either single lever, cross top, or dome type operating members (see model). The spout outlets incorporate a plastic flow straightener or aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240202030

Size:

M10x1 (F).

Marking:

Taizhou Shenglang Sanitary Ware Co., Ltd. logo on body.

Installation Requirements:

R001 R006 R010

Expiry date:

28/02/2029

Model:

SL-KT002 (ceramic cartridge, single lever operating member), SL-KT006 (¼ turn ceramic disc, single lever operating members), SL-KT011 (¼ turn ceramic disc, single lever operating members), SL-KT012 (¼ turn ceramic disc, single lever operating members), SL-KT057 (non-rising spindle, cross top operating members), SL-KT058 (¼ turn ceramic disc, single lever operating members), SL-KT061 (ceramic cartridge, single lever operating member), SL-KT40502 (non-rising spindle, dome type operating members), SL-KT40602 (¼ turn ceramic disc, single lever operating members), SL-KT40702 (non-rising spindle, cross top operating members). The following suffixes can be added to the model codes to denote surface finish: No suffix = chrome plated. B = black finish. BB = bronze brushed finish.

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240204042

Size:

Stainless steel braided, PEX lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Vetta etched on body.

Installation Requirements:

R001 R006 R010

Expiry date:

28/02/2029

Model:

6101-118, 6101-119, 6101-120.

Approval Holder:

Guangdong Meijie Faucet Company Limited

Company Name

Guangdong Meijie Faucet Company Limited

Address

Changlong Village, Huangjiang Town, Dongg

Country

China

View All Listings by this Company

Manufacturer:

Guangdong Meijie Faucet Company Limited

Company Name

Guangdong Meijie Faucet Company Limited

Address

Changlong Village, Huangjiang Town, Dongg

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240404004

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Lanbiao on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2029

Model:

F1210-** F1212-** F1213-** F1219-** ** for finish 1. H-Black 2. N- Nickel Brushed 3. GJS- Zirconium gold brushed 4. G- Zirconium gold 5. QTSL- Brushed bronze bright 6. QTS-Brushed Bronze Matte 7. TJ- Titanium 8. TJLS- Titanium brushed 9. MGJ- Rose gold 10. MGJL- Rose gold brushed 11. HGT- Red bronze 12. HTL- Brushed brass 13. HTS- Brushed copper 14. PVDQH-Gun Ash 15. HQ-Gun Ash Brushed 16. Q-Bronze 17. DYB-Electrophoresis Matt White 18. STS-Acid copper brushed 19. BZ-Spray pearl white 20. B-Spray matt white 21. DMGJ- Light Rose Gold

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Manufacturer:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Model SL-T41201 incorporates a ceramic cartridge headwork and a single lever operating member. Products are supplied with metal back nuts, hoses and shower handsets. Maximum working pressure 6.0 Bar. Maximum operating temperature 60.0°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

240202023

Size:

¾” BSP (M)

Marking:

Taizhou Shenglang Sanitary Ware Co., Ltd logo on mixer body

Installation Requirements:

R001 R005 R020

Expiry date:

28/02/2029

Model:

SL-T20801 SL-T41201 No Suffix = Chrome， B=black

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with single lever operating member and manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with metal back nuts. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2310148

Size:

¾” BSP (M)

Marking:

Scudo on body Model PBBR012 has Scudo logo(2 crossed keys) on body.

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2028

Model:

TAP063L Model added February 2026: PBBR012

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with single lever operating member and manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with metal back nuts. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0525 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a semi-automatic (lockable) diverter to a shower outlet.

WRAS Approval Number:

2310147

Note:

Hose and handset not supplied.

Size:

¾” BSP (M)

Marking:

Scudo on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2028

Model:

TAP012

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body - various finishes). The products incorporate 1/4 turn ceramic disc headworks with single lever, dome type, cubed or cross top operating members. The spout outlets incorporate plastic aerators. The products are supplied with stainless steel braided PEX lined flexible hose assemblies for connection between the side valves and the spout and click type pop-up wastes (verified by test). Maximum working pressure 3.5 Bar. Maximum operating temperature 60.0°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240402020

Size:

1/2" BSP (M).

Marking:

THG on back of spout.

Installation Requirements:

R001 R006 R007 R010

Expiry date:

30/04/2029

Model:

151/W-XXX-YYY, 151M/W-XXX-YYY, 152/W-XXX-YYY, 152M/W-XXX-YYY. Where XXX denotes the style and can be replaced with any of the following: G3P: Montaigne croisillon marbre à définir (Cubed), G3Q: Montaigne manette marbre à définir (Sinle Lever), G3R: Montaigne marbre Grand Antique (Cubed), G3S: Montaigne marbre Grand Antique à manettes (Single Lever), G3T: Montaigne marbre Leonardo Grey (Cubed), G3U: Montaigne marbre Leonardo Grey à manettes (Single Lever), G3V: Montaigne marbre blanc Vénus (Cubed), G3W: Montaigne marbre blanc Vénus à manettes (Single Lever) G4P: Collection "O" G5A: Nano (Cross Top), G5B: Nano à manettes (Single Lever), G5D: Anoa (Single Lever), G6A: Métamorphose (Dome), G6B: Métamorphose à manettes (Single Lever), G6C: Métamorphose Carbone (Single Lever), G6D: Métamorphose Céramique noire (Single Lever), G6E: Métamorphose Céramique blanche (Single Lever), G6F: Métamorphose à manettes coloris spécifique (Single Lever), G6G: New Spirit (Cross Top), G6H: New Spirit à manettes (Single Lever), G7A: Beaubourg (Cross Top), G7B: Beaubourg à manettes (Single Lever), G7U: Yoko Howlite (Dome), G7V: Yoko Delta (Dome), G7W: Yoko Delta Howlite (Dome), G7X: Yoko - pierre à définir (Dome), G7Y: Yoko Delta insert pierre (triangle) à définir (Dome), G7F: Bondi (Cross Top), G7G: Bondi à manettes (Single Lever), G4R: Hamptons (Cross Top), G4S: Hamptons à manettes (Single Lever), G7E: Dean (Single Lever), G7H: CLUB Saint Germain (Cross Top), G7J: CLUB Saint Germain à manettes (Single Lever), G7K: SOHO CRISTAL (nouveau design) (Cubed), G7L: SOHO METAL (nouveau design) (Single Lever), G7R: 120 v1 (Dome Type), G7S: 120 v2 (Dome Type), G7T: 120 v3 (Dome Type), G8A: Les Ondes (Cross Top), G8B: Les Ondes à manettes (Single Lever), T4P: Collection "O" Sélection ME T5A: Nano Sélection (Cross Top), T7E: Dean Sélection (Single Lever), T8A: Les Ondes Sélection ME (Cross Top), T8B: Les Ondes à manettes Sélection ME (Single Lever), U3J: Estrela (Cross Top), U3K: Estrela inserts métal (Single Lever), U3L: Estrela à manettes (Cross Top), U5K: Camelia noir (Dome Type), U5L: Camelia blanc (Dome Type), U5N: New island (Dome Type), U5P: New paradise (Dome Type), U6M: Mille nuits cristal clair (Dome Type), U9A: West Coast croisillon métal (Cross Top), U9B: West Coast manette métal (Single Lever), U9C: West Coast croisillon guilloché lin (Cross Top), U9D: West Coast manette guilloché lin (Single Lever), U9E: West Coast croisillon onyx noir (Cross Top), U9F: West Coast manette onyx noir (Single Lever), U9G: West Coast croisillon onyx blanc (Cross Top), U9H: West Coast manette onyx blanc (Single Lever), U9I: West Coast manette insert à définir (Single Lever), U9J: West Coast croisillons insert à définir (Cross Top), U9K: Grand Central croisillon métal (Cross Top), U9L: Grand Central manette métal (Single Lever), U9M: Grand Central croisillon onyx noir (Cross Top), U9N: Grand Central manette onyx noir (Single Lever), U9P: Grand Central manette insert à définir (Single Lever), U9Q: Grand Central croisillon insert à définir (Cross Top), U9R: Grand Central croisillon onyx blanc (Cross Top), U9S: Grand Central manette onyx blanc (Single Lever). XC1: Les ondes Formentor (Cross Top), XC5: La Minerva Roma (Cross Top). Where YYY denotes the finish and can be replaced with any of the following: A02: Polished Chrome, D12: Polished Brass Lacquered, F34: Matte Brown Bronze PVD, H56: Matte Nickel PVD, A13: Smoked Brass, D15: Polished Black Lacquered, G01: Polished Nickel/Polished Gold, H60: Matte Blush PVD, B01: Polished Nickel, D16: White Lacquered, G02: Polished Chrome/Polished Gold, H62: Blush PVD, C01: Matte Nickel, D18: Matte Black lacquered, H03: Lacquered Antique Silver, H64: Graphite PVD, C02: Matte Chrome, D21: Old Oil-Rubbed Bronze, H28: Antique Nickel, H65: Matte Graphite PVD, C27: Unlacquered Brass, F01: Polished Gold, H49: Brass PVD, H66: Umber PVD, C47: Smoked Nickel, F07: Matte Gold, H52: Gold PVD, H67: Matte Umber PVD, D01: Light Bronze Lacquered, F30: Soft Gold, H53: Matte Gold PVD, D05: Lacquered Matte Bronze, F31: Matte Soft Gold, H55: Nickel PVD, D10: USA Oil-Rubbed Bronze, F33: Brown Bronze PVD, H50: Matte Brass PVD.

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of five-hole, single outlet (fixed) combination tap assemblies with brass or stainless steel bodies in various finishes. The products incorporate a ceramic cartridge headwork controlling both the temperature and flow to the shower handset, and a quarter turn ceramic disc headwork controlling the flow via a thermostatic cartridge to the spout outlet. All have single lever operating members. Some models are supplied with a spout outlet which incorporates a plastic aerator. Some models are supplied with a shower hose and handset. The inlet to the spout assembly and the inlet of the shower handset each incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

240202053

Note:

R006 applies to the spout, where its supplied. R040 applies to the shower handset, where its supplied. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

Stainless steel braided PEX lined hose with ½” BSP captive nut connection

Marking:

VOLA logo on the operating member

Installation Requirements:

R001 R006 R009 R010 R040

Expiry date:

28/02/2029

Model:

VOLA BK15, BK16: Mixer with Adjustable Bracket and water collection box. VOLA BK15A, BK16A: Mixer with Bracket. VOLA BK15B, BK16B: Mixer Alone. VOLA BK15, BK15A, BK15B: Thermostatic mixer with double swivel spout VOLA 090D‐XX and mixer with hand shower. VOLA BK16, BK16A, BK16B –Thermostatic mixer with swivel spout VOLA 090E‐XX and mixer with hand shower. Suffix in the end of the product name indicate the surface finish and denotes: For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of vertical and horizontal expansion vessels with EPDM membrane and stainless steel or galvanised steel connections. Maximum working pressures 10.0. Maximum operating temperature 85 °C.

Section:

1000 Expansion Vessels

Size:

¾” BSP (M) or 1” BSP (M).

Marking:

VAREM, year of production, model and further product information on adhesive label.

Installation Requirements:

R001 R535

Expiry date:

31/12/2028

Model:

Vertical models: S2005; S2008; S2012; S2019; S2020; E1024; S2025; S2040. Horizontal models: S2H19; S2H20.

Approval Holder:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Manufacturer:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Zilmet range of cylindrical or tubular expansion vessels, epoxy coated carbon steel bodies with either Butyl or EPDM membranes and stainless-steel or galvanized carbon-steel connections. Please refer to models for maximum working pressures, as this varies by model and size. Maximum operating temperature 65°C.

Section:

1000 Expansion Vessels

Size:

ULTRA-UV-HT-PRO: 22mm compression. All other models: ¾”-1½” BSP (M) Model added July 2024: 22mm Compression Model added May 2025 3/4 BSP (M)

Marking:

Zilmet, max pressure, max temperature, model, and other technical information on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

ULTRA-UV-HT-PRO 12, 19, 24 Litre capacity: 10.0 bar. ULTRA-PRO HIGH PRESSURE 24, 100, 200, 300, 500, 750, 1000 Litre capacity: 16.0 bar. ULTRA-PRO/HYDROFLEX /HYDRO PLUS TM 12, 18, 22, 24, 35, 50, 60, 80, 100, 200, 300, 500, 750, 1000 Litre capacity: 10.0 bar. ULTRA-PRO/HYDROFLEX /HYDRO PLUS TM 8 Litre capacity: 8.0 bar. Models added July 2024: ULTRA PRO 12, 18, 19 & 24Litre capacity: 10.0 bar Models added May 2025 ULTRA PRO D 12, 19, 24, 35 Litre capacity 10 bar

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Range of filling loop assemblies, consisting of: A nickel plated DZR brass bodied isolation valve with chrome plated DZR brass ball and integral non-verifiable double check valve assembly, verified by test (suitable for backflow protection against Fluid Category 3). A stainless-steel braided EPDM lined flexible hose assembly. An isolation valve with a nickel plated DZR brass body and a chrome plated DZR brass ball. The HLD14.12.049 model is supplied with a lanyard and cap end for each valve. The compression connections are for use with copper pipe (manufactured to BS2871). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet.

Marking:

Honglida, justlink, WRAS and year of manufacture (YYYY) on hose ferrule. Size, CR and flow arrow on combined spherical valve and double check valve body. Flow arrow on spherical valve body

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

HLD14.12.048, HLD14.12.049.

Approval Holder:

Yuhuan Honglida Valve Co., Ltd.

Company Name

Yuhuan Honglida Valve Co., Ltd.

Address

No. 268, Jinhai Avenue, Xuanmen Industrial Area, Economic Development Area of Yuhuan

Country

Zhejiang,

Phone

86-576-87112511

View All Listings by this Company

Manufacturer:

Yuhuan Honglida Valve Co., Ltd.

Company Name

Yuhuan Honglida Valve Co., Ltd.

Address

No. 268, Jinhai Avenue, Xuanmen Industrial Area, Economic Development Area of Yuhuan

Country

Zhejiang,

Phone

86-576-87112511

View All Listings by this Company

Range of filter cartridges. Maximum working pressure 8.0 Bar. Cold water use only.

Section:

1055 Filter Cartridges

Size:

¾” BSP (M)

Marking:

BWT and product info on body

Installation Requirements:

R001 R008 R120 R170

Expiry date:

28/02/2029

Model:

Bestmax X, S, V, M, L, XL & 2XL comprising model codes: 812110, 812111, 812112, 812113, 812114, 812115 & 812116. Bestmax Premium S, V, M, XL & 2XL comprising model codes: 812123, 812124, 812117, 812118 & 812119. Bestprotect S, V, M, XL & 2XL comprising model codes: 812321, 812335, 812315 & 812316.

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

‘Polyplumb’ plastic compression and push-fit fittings for use with polyethylene pipe (Polyguard PE80 ‐PE/AL/PE‐barrier pipe to BS8588), Polyplumb barrier pipe (to BS7291) & Copper pipe (to BS EN 1057). Inserts must be used to accommodate the Polyplumb Barrier pipes. For above and below ground use. Maximum working pressure: 12.5bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202047

Size:

See models.

Marking:

Polypipe logo, size, pressure rating on cap nut (Polyguard compression fittings). Polypipe logo, size, impression No, year code of manufacture (i.e. E=2022) on cap nut (Polyguard pushfit fittings). Polypipe logo or ‘Polypipe’, size, PE/AL/PE, Polyguard, date of manufacture (Polyguard barrier pipes). Polyplumb, size, PB Barrier, date of manufacture (Polyplumb barrier pipes).

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

PGF40325 - 25mm x 3/4" Polyguard x FBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40925 - 25mm Socket End Plug - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40932 - 32mm Socket End Plug - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF4782515 - 25mm x 15mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF47825 - 25mm x 22mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF47832 - 32mm x 28mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF402525 - 25mm x 25mm Transition Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF403232 - 32mm x 32mm Transition Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40025 - 25mm Straight Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40032 - 32mm Straight Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40225 - 25mm Equal Tee - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40232 - 32mm Equal Tee - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40632 - 32mm x 25mm Reducing Coupler - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40132 - 32mm 90° Elbow - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40125 - 25mm 90° Elbow - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40332 - 32mm x 1” Poyguard x FBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40425 - 25mm x 3/4" Polyguard x MBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40432 - 32mm x 1" Polyguard x MBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe.

Approval Holder:

Polypipe Limited (Trading as Polypipe Building Products)

Company Name

Polypipe Limited (Trading as Polypipe Building Products)

Address

Broomhouse Lane, Edlington, Doncaster

Postcode

DN12 1ES

Country

South Yorkshire

Phone

+44 (0) 1709 770000 Fax: 01709 770001

General Email

marketing@polypipe.com

View All Listings by this Company

Manufacturer:

Polypipe Limited (Trading as Polypipe Building Products)

Company Name

Polypipe Limited (Trading as Polypipe Building Products)

Address

Broomhouse Lane, Edlington, Doncaster

Postcode

DN12 1ES

Country

South Yorkshire

Phone

+44 (0) 1709 770000 Fax: 01709 770001

General Email

marketing@polypipe.com

View All Listings by this Company

Range of AIS tin-plated brass and PPSU press fit fittings for use with WRW & 'Maincor MLC’ multi layered PE-RT/AL/PE-RT pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202078

Size:

Please refer to model.

Marking:

Manicor Pipe: Maincor and technical information on pipe. WRW Pipe: AIS XPERT and technical information on pipe. Fittings: AIS & size on Crimping profile.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Press fit connections: P733.4040, PPSU Press-coupling, 40mm P733.5050, PPSU Press-coupling, 50mm P733.6363, PPSU Press-coupling, 63mm P703.4040, PPSU Press-elbow 90°, 40mm P703.5050, PPSU Press-elbow 90°, 50mm P703.6363, PPSU Press-elbow 90°, 63mm P723.404040, PPSU Press-Tee, 40mm P723.505050, PPSU Press-Tee, 50mm P723.636363, PPSU Press-Tee, 63mm P703.20201, PPSU Press-elbow 90°, 20mm P703.2626, PPSU Press-elbow 90°, 26mm P723.1620161, PPSU Press-Tee, 16mm-20mm P723.2020201, PPSU Press-Tee, 20mm P723.2016161, PPSU Press-Tee, 16mm-20mm P723.2016201, PPSU Press-Tee, 16mm-20mm P723.2020161, PPSU Press-Tee, 16mm-20mm P723.262626, PPSU Press-Tee, 26mm P723.261626, PPSU Press-Tee, 16mm-26mm P723.2520201, PPSU Press-Tee, 20mm-25mm P723.2520251, PPSU Press-Tee, 20mm-25mm P723.322632, PPSU Press-Tee, 26mm-32mm P723.322626, PPSU Press-coupling, 26mm-32mm P733.12020, PPSU Press-coupling, 20mm P733.20201, PPSU Press-coupling, 20mm P733.20161, PPSU Press-coupling, 16mm-20mm P733.2625D, PPSU Press-coupling, 25mm-26mm P733.2626, PPSU Press-coupling, 26mm P733.20161, PPSU Press-coupling, 16mm-20mm P733.26201, PPSU Press-coupling, 20mm-26mm 733.3226, PPSU Press-coupling, 26mm-32mm P701.1612, PPSU male press elbow, 16mm-1/2” BSP (M) P701.2012, PPSU male press elbow, 20mm-1/2” BSP (M) P701.20121, PPSU male press elbow, 20mm-1/2” BSP (M) P701.2034, PPSU male press elbow, 20mm-3/4” BSP (M) P701.20341, PPSU male press elbow, 20mm-3/4” BSP (M) P701.2534, PPSU male press elbow, 25mm-3/4” BSP (M) P701.32100, PPSU male press elbow, 32mm-1” BSP (M) P702.1612, PPSU female press wallplate, 16mm-1/2” BSP (F) P702.2012, PPSU female press wallplate, 20mm-1/2” BSP (F) P702.20121, PPSU female press wallplate, 20mm-1/2” BSP (F) P700.1612, PPSU Female press elbow , 16mm-1/2” BSP (F) P700.2012, PPSU Female press elbow, 20mm-1/2” BSP (F) P700.20121, PPSU Female press elbow, 20mm-1/2” BSP (F) P711.1612, PPSU male press connection, 16mm-1/2” BSP (M) P711.2012, PPSU male press connection, 20mm-1/2” BSP (M) P711.2034, PPSU male press connection, 20mm-3/4” BSP (M) P711.20121, PPSU male press connection, 20mm-1/2” BSP (M) P711.2534, PPSU male press connection, 25mm-3/4” BSP (M) P711.32100, PPSU male press connection, 32mm-1” BSP (M) 1*00.1612, Press-elbow female 90º XPRT 16x2,00-1/2"H, 16mm-1/2” BSP (F) 1*00.2012, Press-elbow female 90º XPRT 20x2,25-1/2"H, 20mm-1/2” BSP (F) 1*00.20121, Press-elbow female 90º XPRT 20x2,00-1/2"H, 20mm-1/2” BSP (F) 1*00.2034, Press-elbow female 90º XPRT 20x2,25-3/4"H, 20mm-3/4” BSP (F) 1*00.20341, Press-elbow female 90º XPRT 20x2,00-3/4"H, 20mm-3/4” BSP (F) 1*00.2534, Press-elbow female 90º XPRT 25x2,50-3/4"H, 25mm-3/4” BSP (F) 1*00.2634, Press-elbow female 90º XPRT 26x3,00-3/4"H, 26mm-3/4” BSP (F) 1*00.25100, Press-elbow female 90° XPRT 25x2,5-1” H, 25mm-1” BSP (F) 1*00.32100, Press-elbow female 90º XPRT 32x3,00-1"H, 32mm-1” BSP (F) 1*01.1612, Press-elbow male 90º XPRT 16x2,00-1/2"M, 16mm-1/2” BSP (M) 1*01.1638, Press-elbow male 90º XPRT 16x2,00-3/8"M, 16mm-3/8” BSP 1*01.2012, Press-elbow male 90º XPRT 20x2,25-1/2"M, 20mm-1/2” BSP 1*01.20121, Press-elbow male 90º XPRT 20x2,00-1/2"M, 20mm-1/2” BSP 1*01.2034, Press-elbow male 90º XPRT 20x2,25-3/4"M, 20mm-3/4” BSP 1*01.20341, Press-elbow male 90º XPRT 20x2,00-3/4"M, 20-3/4” BSP 1*01.2534, Press-elbow male 90º XPRT 25x2,50-3/4"M, 25-3/4” BSP 1*01.2634, Press-elbow male 90º XPRT 26x3,00-3/4"M, 26-3/4” BSP 1*01.25100, Press-elbow male 90º XPRT 25x2,50-1"M, 25-1” BSP 1*01.32100, Press-elbow male 90º XPRT 32x3,00-1"M, 32-1” BSP 1*02.1612, Press-wallplate elbow female 90º XPRT 16x2,00-1/2"F - 46 mm height, 16-1/2” BSP (F) 1*02.2012, Press-wallplate elbow female 90º XPRT 20x2,25-1/2"F - 46 mm height, 20-1/2” BSP 1*02.20121, Press-wallplate elbow female 90º XPRT 20x2,00-1/2"F - 46 mm height, 20-1/2” BSP 1*02.2034, Press-wallplate elbow female 90º XPRT 20x2,00-3/4"F - 46 mm height, 20-3/4” BSP 1*02.2534, Press-wallplate elbow female 90º XPRT 25x2,50-3/4"F - 46 mm height, 25-3/4” BSP 1*03.1616, Press-elbow 90º XPRT 16x2,00, 16mm 1*03.2020, Press-elbow 90º XPRT 20x2,25, 20mm 1*03.20201, Press-elbow 90º XPRT 20x2,00, 20mm 1*03.2525, Press-elbow 90º XPRT 25x2,50, 25mm 1*03.2626, Press-elbow 90º XPRT 26x3,00, 26mm 1*03.3232, Press-elbow 90º XPRT 32x3,00, 32mm 1*04.3232, Press-elbow 45º XPRT 32x3,00, 32mm 1*05.1612, Double-press-tab connection elbow FT, 16x2,0-1/2-16x2,0, 16mm-1/2 BSP (F) 1*05.2012, Double-press-tab connection elbow FT,20x2,25 ½”, 20mm-1/2 BSP (F) 1*06.1612, Press-wallplate elbow female 90º XPRT 16x2,00-1/2"F - 38 mm height, 16-1/2” BSP (F) 1*06.1638, Press-wallplate elbow female 90º XPRT 16x2,00-3/8"F - 38 mm height, 16-3/8” BSP 1*06.2012, Press-wallplate elbow female 90º XPRT 20x2,25-1/2"F - 38 mm height, 20-1/2” BSP 1*06.20121, Press-wallplate elbow female 90º XPRT 20x2,00-1/2"F - 38 mm height, 20-1/2” BSP 1*07.1612, Elbow 90º with screw connection XPRT 16x2,00-1/2", 16-1/2” BSP (M) 1*07.2012, Elbow 90º with screw connection XPRT 20x2,25-1/2", 20-1/2” BSP (M) 1*07.2034, Elbow 90º with screw connection XPRT 20x2,25-3/4", 20-3/4” BSP (M) 1*07.2534, Elbow 90º with screw connection XPRT 25x2,50-3/4", 25-3/4” BSP (M) 1*08.1612, Press-UPS-connection elbow FT Geberit 16x2,0-1/2, 16mm-1/2” BSP (F) 1*10.1612, Press-connection female XPRT 16x2,00-1/2"H, 16mm-1/2” BSP (F) 1*10.1634, Press-connection female XPRT 16x2,00-3/4"H, 16-3/4” BSP 1*10.2012, Press-connection female XPRT 20x2,25-1/2"H, 20-1/2” BSP 1*10.20121, Press-connection female XPRT 20x2,00-1/2"H, 20-1/2” BSP 1*10.2034, Press-connection female XPRT 20x2,25-3/4"H, 20-3/4” BSP 1*10.20341, Press-connection female XPRT 20x2,00-3/4"H, 20-3/4” BSP 1*10.20100, Press-connection female XPRT 20x2,25-1"H, 20-1” BSP 1*10.25100, Press-connection female XPRT 25x2,50-1"H, 25-1” BSP 1*10.2534, Press-connection female XPRT 25x2,50-3/4"H, 25-3/4” BSP 1*10.26100, Press-connection female XPRT 26x3,00-1"H, 26-1” BSP 1*10.2634, Press-connection female XPRT 26x3,00-3/4"H, 26-3/4” BSP 1*10.32100, Press-connection female XPRT 32x3,00-1"H, 32-1” BSP 1*10.32114, Press-connection female XPRT 32x3,00-1 1/4"H, 32-1 1/4” BSP 1*11.1612, Press-connection male XPRT 16x2,00-1/2"M, 16-1/2” BSP (M) 1*11.1634, Press-connection male XPRT 16x2,00-3/4"M, 16-3/4” BSP 1*11.1638, Press-connection male XPRT 16x2,00-3/8"M, 16-3/8” BSP 1*11.2012, Press-connection male XPRT 20x2,25-1/2"M, 20-1/2” BSP 1*11.20121, Press-connection male XPRT 20x2,00-1/2"M, 20-1/2” BSP 1*11.2034, Press-connection male XPRT 20x2,25-3/4"M, 20-3/4” BSP 1*11.20341, Press-connection male XPRT 20x2,00-3/4"M, 20-3/4” BSP 1*11.20100, Press-connection male XPRT 20x2,25-1"M, 20-1” BSP 1*11.25100, Press-connection male XPRT 25x2,50-1"M, 25-1” BSP 1*11.2534, Press-connection male XPRT 25x2,50-3/4"M, 25-3/4” BSP 1*11.26100, Press-connection male XPRT 26x3,00-1"M, 26-1” BSP 1*11.2634, Press-connection male XPRT 26x3,00-3/4"M, 26-3/4” BSP 1*11.32100, Press-connection male XPRT 32x3,00-1"M, 32-1” BSP 1*11.32114, Press-connection male XPRT 32x3,00-1 1/4"M, 32-1 1/4” BSP 1*14.1612, Press-screw connection female XPRT 16x2,00-1/2"F, 16-1/2” BSP (F) 1*14.1634, Press-screw connection female XPRT 16x2,00-3/4"F, 16-3/4” BSP 1*14.1638, Press-screw connection female XPRT 16x2,00-3/8"F, 16-3/8” BSP 1*14.2012, Press-screw connection female XPRT 20x2,25-1/2", 20-1/2” BSP 1*14.20121, Press-screw connection female XPRT 20x2,0-1/2", 20-1/2” BSP 1*14.2034, Press-screw connection female XPRT 20x2,25-3/4", 20-3/4” BSP 1*14.20341, Press-screw connection female XPRT 20x2,00-3/4"F, 20-3/4” BSP 1*14.25100, Press-screw connection female XPRT 25x2,5-1", 25-1” BSP 1*14.2534, Press-screw connection female XPRT 25x2,5-3/4", 25-3/4” BSP 1*14.26100, Press-screw connection female XPRT 26x3,00-1"F, 26-1” BSP 1*14.2634, Press-screw connection female XPRT 26x3,00-3/4"F, 26-3/4” BSP 1*14.32100, Press-screw connection female XPRT 32x3,0-1", 32-1” BSP 1*14.32114, Press-screw connection female XPRT 32x3,0-1 1/4", 32-1 1/4” BSP 1*20.161216, Press-tee female XPRT 16x2,00-1/2"F-16x2,00, 16-1/2” BSP (F) 1*20.201220, Press-tee female XPRT 20x2,25-1/2"F-20x2,25, 20-1/2” BSP 1*20.2012201, Press-tee female XPRT 20x2,00-1/2"F-20x2,00, 20-1/2” BSP 1*20.203420, Press-tee female XPRT 20x2,25-3/4"F-20x2,25, 20-3/4” BSP 1*20.251225, Press-tee female XPRT 25x2,50-1/2"F-25x2,50, 25-1/2” BSP 1*20.253425, Press-tee female XPRT 25x2,50-3/4"F-25x2,50, 25-3/4” BSP 1*20.261226, Press-tee female XPRT 26x3,00-1/2"F-26x3,00, 26-1/2” BSP 1*20.263426, Press-tee female XPRT 26x3,00-3/4"F-26x3,00, 26-3/4” BSP 1*20.321232, Press-tee female XPRT 32x3,00-1/2"F-32x3,00, 32-1/2” BSP 1*20.323432, Press-tee female XPRT 32x3,00-3/4"F-32x3,00, 32-3/4” BSP 1*21.161216, Press tee MT 16x2,00-1/2”-16x2,00, 16-1/2” BSP (M) 1*21.253425, Press tee MT 25x2,50-3/4”-25x2,50, 25-3/4” BSP (M) 1*21.323432, Press tee MT 32x3,00-3/4”-32x3,00, 32-3/4” BSP (M) 1*23.161616, Press-T XPRT 16x2,00, 16mm 1*23.162016, Press-tee reduced XPRT 16x2,00-20x2,25-16x2,00, 16-20mm 1*23.1620161, Press-T reduced XPRT 16x2,00-20x2,00-16x2,00, 16-20mm 1*23.201616, Press-tee reduced XPRT 20x2,25-16x2,00-16x2,00, 16-20mm 1*23.2016161, Press-tee reduced XPRT 20x2,00-16x2,00-16x2,00, 16-2mm 1*23.201620, Press-T reduced XPRT 20x2,25-16x2,00-20x2,25, 16-20mm 1*23.2016201, Press-T reduced XPRT 20x2,00-16x2,00-20x2,00, 16-20mm 1*23.202016, Press-tee reduced XPRT 20x2,25-20x2,25-16x2,00, 16-20mm 1*23.2020161, Press-T reduced XPRT 20x2,00-20x2,00-16x2,00, 16-20mm 1*23.202020, Press-T XPRT 20x2,25, 20mm 1*23.2020201, Press-T XPRT 20x2,00, 20mm 1*23.2026201, Press-tee reduced XPRT 20x2,00-26x3,00-20x2,00, 20-26mm 1*23.202520, Press-tee reduced XPRT 20x2,25-25x2,50-20x2,25, 20-25mm 1*23.251616, Press-tee reduced XPRT 25x2,50-16x2,00-16x2,00, 16-25mm 1*23.251620, Press-tee reduced XPRT 25x2,50-16x2,00-20x2,25, 16-20-25mm 1*23.251625, Press-tee reduced XPRT 25x2,50-16x2,00-25x2,50, 16-25mm 1*23.252020, Press-tee reduced XPRT 25x2,50-20x2,25-20x2,25, 20-25mm 1*23.2520201, Press-tee reduced XPRT 25x2,50-20x2,00-20x2,00, 20-25mm 1*23.252025, Press-tee reduced XPRT 25x2,50-20x2,25-25x2,50, 20-25mm 1*23.2520251, Press-tee reduced XPRT 25x2,50-20x2,0-25x2,50, 20-25mm 1*23.252516, Press-tee reduced XPRT 25x2,50-25x2,5-16x2,00, 16-25mm 1*23.252520, Press-tee reduced XPRT 25x2,50-25x2,50-20x2,25, 20-25mm 1*23.2525201, Press-tee reduced XPRT 25x2,50-25x2,50-20x2,00, 20-25mm 1*23.252525, Press-T XPRT 25x2,50, 25mm 1*23.253225, Press-tee reduced XPRT 25x2,50-32x3,00-25x2,50, 25-32mm 1*23.261616, Press-tee reduced XPRT 26x3,00-16x2,00-16x2,00, 16-26mm 1*23.2616201, Press-tee reduced XPRT 26x3,00-16x2,00-20x2,00, 16-20-26mm 1*23.261626, Press-tee reduced XPRT 26x3,00-16x2,00-26x3,00, 16-26mm 1*23.2620201, Press-tee reduced XPRT 26x3,00-20x2,00-20x2,00, 20-26mm 1*23.2620261, Press-tee reduced XPRT 26x3,00-20x2,00-26x3,00, 20-26mm 1*23.2626201, Press-tee reduced XPRT 26x3,00-26x3,00-20x2,00, 20-26mm 1*23.262626, Press-T XPRT 26x3,00, 26mm 1*23.321632, Press-tee reduced XPRT 32x3,00-16x2,00-32x3,00, 16-32mm 1*23.322032, Press-tee reduced XPRT 32x3,00-20x2,25-32x3,00, 20-32mm 1*23.3220321, Press-tee reduced XPRT 32x3,00-20x2,00-32x3,00, 20-32mm 1*23.322525, Press-tee reduced XPRT 32x3,00-25x2,50-25x2,50, 25-32mm 1*23.322532, Press-tee reduced XPRT 32x3,00-25x2,50-32x3,00, 25-32mm 1*23.322626, Press-tee reduced XPRT 32x3,00-26x3,00-26x3,00, 26-32mm 1*23.322632, Press-tee reduced XPRT 32x3,00-26x3,00-32x3,00, 26-32mm 1*23.323232, Press-T XPRT 32x3,00, 32mm 1*33.1616, Press-coupling XPRT 16x2,00, 16mm 1*33.2016, Press-coupling reduced XPRT 20x2,25-16x2,00, 16-20mm 1*33.20161, Press-coupling reduced XPRT 20x2,00-16x2,00, 16-20mm 1*33.2020, Press-coupling XPRT 20x2,25, 20mm 1*33.20201, Press-coupling XPRT 20x2,00, 20mm 1*33.2516, Press-coupling reduced XPRT 25x2,50-16x2,00, 16-25mm 1*33.2520, Press-coupling reduced XPRT 25x2,50-20x2,25, 20-25mm 1*33.25201, Press-coupling reduced XPRT 25x2,50-20x2,00, 20-25mm 1*33.2525, Press-coupling XPRT 25x2,50, 25mm 1*33.2616, Press-coupling reduced XPRT 26x3,00-16x2,00, 16-26mm 1*33.26201, Press-coupling reduced XPRT 26x3,00-20x2,00, 20-26mm 1*33.2626, Press-coupling XPRT 26x3,00, 26mm 1*33.3216, Press-coupling reduced XPRT 32x3,00-16x2,00, 16-32mm 1*33.3220, Press-coupling reduced XPRT 32x3,00-20x2,25, 20-32mm 1*33.3225, Press-coupling reduced XPRT 32x3,00-25x2,50, 25-32mm 1*33.3226, Press-coupling reduced XPRT 32x3,00-26x3,00, 26-32mm 1*33.3232, Press-coupling XPRT 32x3,00, 32mm 1*52.1616, Press-adapter for PE pipes 16x2,0-PER 16x1,5 (16/13), 16mm 1*52.2020, Press-adapter for PE pipes 20x2,25-PER 20x1,9, 20mm 1*53.161215, Press radiator connection elbow 16x2,0-150 mm-Cu 12, 16-12mm 1*53.161515, Press radiator connection elbow 16x2,0-150 mm-Cu 15, 16-15mm 1*53.161535, Press radiator connection elbow 16x2,0-330 mm-Cu 15, 16-15mm 1*54.161512, Press-connection MT 16x2,0-1/2-Cu 15mm, 16-1/2” BSP (M) 1*54.1610 (B), Press-adapter for copper pipes 16x2,0-Cu 10, 16-10mm 1*54.1612 (B), Press-adapter for copper pipes 16x2,0-Cu 12, 16-12mm 1*54.1615 (B), Press-adapter for copper pipes 16x2,0-Cu 15, 16-15mm 1*54.16161 (B), Press-adapter for copper pipes 16x2,0-Cu 16, 16-16mm 1*54.2018 (B), Press-adapter for copper pipes 20x2,25-Cu 18, 20-18mm 1*54.2022 (B), Press-adapter for copper pipes 20x2,25-Cu 22, 20-22mm 1*54.2522 (B), Press-adapter for copper pipes 25x2,5-Cu 22, 25-22mm 1*54.2528 (B), Press-adapter for copper pipes 25x2,5-Cu 28, 25-28mm 1*54.3228 (B), Press-adapter for copper pipes 32x3,0-Cu 28, 32-28mm 1*54.2022118, Press-connection MT 20x2,25-1 1/8-Cu 22mm, 20-1 1/8mm 1*54.2522118, Press-connection MT 25x2,5-1 1/8-Cu 22mm, 25-1 1/8mm 1*55.16, Press-plug 16x2,0, 16mm 1*55.20, Press-plug 20x2,25, 20mm 1*56.161512, Press-elbow 90° MT 16x2,0-1/2-Cu 15mm, 16-1/2mm 1*63.161535, Press radiator connection elbow 16x2,0-330 mm-Cu 15, 16-15mm 1*63.201535, Press radiator connection elbow 20x2,25-330 mm-Cu 15, 20-15mm 1*75.16, Press-tab connection for wall 16x2,0-1/2, 16-1/2” BSP 1*76.16, Press-UPS-connection elbow 16x2,0-1/2, 16-1/2” BSP 1*81.16, Press-UPS-connection elbow - Multifix 16x2,0-1/2, 16-1/2” BSP 1*81.16L, Press-UPS-connection elbow – Multifix 16x2,0-1/2, 16-1/2” BSP 1*81.20, Press-UPS-connection elbow - Multifix 20x2,25-1/2, 20-1/2” BSP (*) 7 or 9, where 7 is for tin plated fittings, and 9 for non tin plated fittings 703.4040*, Press-elbow 90° XPRT 40x4,00-40x4,00, 40mm 704.4040*, Press-elbow 45° XPRT 40x4,00-40x4,00, 40mm 710.40112*, Press-connection female XPRT 40x4,00-1 1/2"F, 40-1 1/2” BSP 710.40114*, Press-connection female XPRT 40x4,00-1 1/4"F, 40-1 1/4” BSP 711.40112*, Press-connection male XPRT 40x4,00-1-1/2"M, 40-1 1/2” BSP 711.40114*, Press-connection male XPRT 40x4,00-1-1/4"M, 40-1 1/4” BSP 714.40112*, Press-screw connection female XPRT 40x4,00-1 1/2"F, 40-1 1/2” BSP 714.40114*, Press-screw connection female XPRT 40x4,00-1 1/4"F, 40-1 1/4” BSP 720.4010040*, Press-T female XPRT 40x4,00-1"F-40x4,00, 40-1” 723.402040*, Press-T reduced XPRT 40x4,00-20x2,25-40x4,00, 20-40mm 723.4020401*, Press-T reduced XPRT 40x4,00-20x2,00-40x4,00, 20-40mm 723.402540*, Press-T reduced XPRT 40x4,00-25x2,50-40x4,00, 25-40mm 723.402640*, Press-T reduced XPRT 40x4,00-26x3,00-40x4,00, 26-40mm 723.403232*, Press-T reduced XPRT 40x4,00 - 32x3,00 - 32x3,00, 32-40mm 723.403240*, Press-T reduced XPRT 40x4,00-32x3,00-40x4,00, 32-40mm 723.404040*, Press-T XPRT 40x4,00-40x4,00-40x4,00, 40mm 733.4025*, Press-coupling reduced XPRT 40x4,00-25x2,50, 25-40mm 733.4026*, Press-coupling reduced XPRT 40x4,00-26x2,50, 26-40mm 733.4032*, Press-coupling reduced XPRT 40x4,00-32x3,00, 32-40mm 733.4040*, Press-coupling XPRT 40x4,00-40x4,00, 40mm 703.5050*, Press-elbow 90° XPRT 50x4,50-50x4,50, 50mm 704.5050*, Press-elbow 45° XPRT 50x4,50-50x4,50, 50mm 710.50112*, Press-connection female XPRT 50x4,50-1 1/2"F, 50-1 1/2” BSP 711.50112*, Press-connection male XPRT 50x4,50-1-1/2"M, 50-1 1/2” BSP 711.50200*, Press-connection male XPRT 50x4,50-2"M, 50-2” BSP 714.50200*, Press-screw connection female XPRT 50x4,50-2"F, 50-2” BSP 720.5010050*, Press-T female XPRT 50x4,50-1"F-50x4,50, 50-1” BSP 723.502550*, Press-T reduced XPRT 50x4,50-25x2,50-50x4,50, 25-50mm 723.502650*, Press-T reduced XPRT 50x4,50-26x3,00-50x4,50, 26-50mm 723.503250*, Press-T reduced XPRT 50x4,50-32x3,00-50x4,50, 32-50mm 723.504050*, Press-T reduced XPRT 50x4,50-40x4,00-50x4,50, 40-50mm 723.505050*, Press-T XPRT 50x4,50-50x4,50-50x4,50, 50mm 733.5032*, Press-coupling reduced XPRT 50x4,50-32x3,00, 32-50mm 733.5040*, Press-coupling reduced XPRT 50x4,50-40x4,00, 40-50mm 733.5050*, Press-coupling XPRT 50x4,50-50x4,50, 50mm 703.6363*, Press-elbow 90° XPRT 63x6,00-63x6,00, 63mm 704.6363*, Press-elbow 45° XPRT 63x6,00-63x6,00, 63mm 710.63200*, Press-connection female XPRT 63x6,00-2"F, 63-2” BSP 711.63200*, Press-connection male XPRT 63x6,00-2"M, 63-2” BSP 714.63200*, Press-screw connection female XPRT 63x6,00-2"F, 63-2” BSP (F) 720.6310063*, Press-T female XPRT 63x6,00-1"F-63x6,00, 63-1” BSP 723.632563*, Press-T reduced XPRT 63x6,00-25x2,50-63x6,00, 25-63mm 723.632663*, Press-T reduced XPRT 63x6,00-26x2,50-63x6,00, 26-63mm 723.633263*, Press-T reduced XPRT 63x6,00-32x3,00-63x6,00, 32-63mm 723.634063*, Press-T reduced XPRT 63x6,00-40x4,00-63x6,00, 40-63mm 723.635063*, Press-T reduced XPRT 63x6,00-50x4,50-63x6,00, 50-63mm 723.636363*, Press-T XPRT 63x6,00-63x6,00-63x6,00, 63mm 733.6340*, Press-coupling reduced XPRT 63x6,00-40x4,00, 40-63mm 733.6350*, Press-coupling reduced XPRT 63x6,00-50x4,50, 50-63mm 733.6363*, Press-coupling XPRT 63x6,00-63x6,00, 63mm (*) ending in F or w/o F, where w/o F is for tin plated fittings, and ending in F for non tin plated fittings All the above fittings can be used with the following pipe sizes: , , Supplier: WRW, 101.16025, AIS MLP PERT/ Al/PERT 16x2-coil, no box- Supplier: WRW, 101.16XXX XXX=length of coil, AIS MLP PERT/ Al/PERT 16x2- coil, box- Supplier: WRW, 101.20100, AIS MLP PERT/ Al/PERT 20x2,25 - coil, box- Supplier: WRW, 101.20101, AIS MLP PERT/ Al/PERT 20x2- coil, box- Supplier: WRW, 101.25050, AIS MLP PERT/ Al/PERT 25x2,5- coil, box- Supplier: WRW, 101.26050, AIS MLP PERT/ Al/PERT 26x3- coil, box- Supplier: WRW, 101.32050, AIS MLP PERT/ Al/PERT 32x3- coil, box- Supplier: WRW, 102.16004, AIS MLP PERT/ Al/PERT 16x2 -bar- Supplier: WRW, 102.20004, AIS MLP PERT/ Al/PERT 20x2,25-bar- Supplier: WRW, 102.20104, AIS MLP PERT/ Al/PERT 20x2-bar- Supplier: WRW, 102.25004, AIS MLP PERT/ Al/PERT 25x2,5-bar- Supplier: WRW, 102.26004, AIS MLP PERT/ Al/PERT 26x3-bar- Supplier: WRW, 102.32004, AIS MLP PERT/ Al/PERT 32x3-bar- Supplier: WRW, 102.40004, AIS MLP PERT/ Al/PERT 40x4-bar- Supplier: WRW, 102.50004, AIS MLP PERT/ Al/PERT 50x4,5-bar- Supplier: WRW, 102.63004, AIS MLP PERT/ Al/PERT 63x6-bar- Supplier: WRW, 104.16100, AIS MLP PERT/ Al/PERT 16x2 -coil, no box- Supplier: WRW, 104.20100, AIS MLP PERT/ Al/PERT 16x2-coil, no box- Supplier: WRW, 104.20101, AIS MLP PERT/ Al/PERT 20x2-coil, no box- Supplier: WRW, 104.25050, AIS MLP PERT/ Al/PERT 25x2,5-coil, no box- Supplier: WRW, 104.26050, AIS MLP PERT/ Al/PERT 26x3-coil, no box- Supplier : Maincor, 816001400x x=3 or 5 (m), AIS MLP PERT/ Al/PERT , in bars: d=16x2mm 8160014xxx xxx= length of coil , AIS MLP PERT/ Al/PERT , in coils: d=16x2mm , 020061400x x=3 or 5 (m), MLP, in bars: d=20x2mm , 0200614xxx xxx= length of coil, MLP, in coils: d=20x2mm , 820001400x x=3 or 5 (m), MLP, in bars: d=20x2,25mm , 8200014xxx xxx= length of coil, MLP, in coils: d=20x2,25mm , 825001400x x=3 or 5 (m), MLP, in bars: d=25x2,5mm , 8250014xxx xxx= length of coil, MLP, in coils: d=25x2,5mm , 826001400x x=3 or 5 (m), MLP, in bars: d=26x3mm , 8260014xxx xxx= length of coil, MLP, in bars: d=26x3mm , 832001400x x=3 or 5 (m), MLP, in bars: d=32x3mm , 8320014050 only 50m coil available, MLP, in coils: d=32x3mm , 8400014005, MLP, in bars: d=40x4mm , 10150451, MLP, in bars: d=50x4,5mm , 10160601, MLP, in bars: d=63x6mm Models added April 2024: 723.324032*, Press-T reduced XPRT 32x3,00-40x4,00-32x3,00, 32-40mm 723.402532*, Press-T reduced XPRT 40x4,00-25x2,50-32x3,00, 25-40mm 723.405040*, Press-T reduced XPRT 40x4,00-50x4,50-40x4,00, 40-50mm 723.502540*, Press-T reduced XPRT 50x4,50-25x2,50-40x4,00, 25-50mm 723.506350*, Press-T reduced XPRT 50x4,50-63x6,00-50x4,50, 50-63mm (*) ending in F or w/o F, where w/o F is for tin plated fittings, and ending in F for non tin plated fittings Models added May 2024; P703.1616, PPSU Press-elbow 90° P703.2020, PPSU Press-elbow 90° P703.2525, PPSU Press-elbow 90° P703.3232, PPSU Press-elbow 90° P723.161616, PPSU Press-Tee P723.162016, PPSU Press-Tee P723.202020, PPSU Press-Tee P723.201616, PPSU Press-Tee P723.201620, PPSU Press-Tee P723.202016, PPSU Press-Tee P723.252525, PPSU Press-Tee P723.251625, PPSU Press-Tee P723.252020, PPSU Press-Tee P723.252025, PPSU Press-Tee P723.323232, PPSU Press-Tee P723.322032, PPSU Press-Tee P723.322532, PPSU Press-Tee P723.322525, PPSU Press-Tee P733.1616, PPSU Press-coupling P733.2020, PPSU Press-coupling P733.2016, PPSU Press-coupling P733.2525, PPSU Press-coupling P733.2516, PPSU Press-coupling P733.2520, PPSU Press-coupling P733.3232, PPSU Press-coupling P733.3225, PPSU Press-coupling P701.2634, PPSU male press elbow P711.20341, PPSU male press connection P711.2634, PPSU male press connection P723.2620201, PPSU Press-Tee P723.2620261, PPSU Press-Tee P723.3220321, PPSU Press-Tee P733.25201, PPSU Press-coupling P733.2616, PPSU Press-coupling

Approval Holder:

MULTICAPAS INDUSTRIAL SLU

Company Name

MULTICAPAS INDUSTRIAL SLU

Address

C/INDUSTRIAS 4, OF. 10-11 ALCORCÓN MADRID

Postcode

28923

Country

Spain

General Email

emendez@aisoutnovation.com

View All Listings by this Company