Range of chemical dosing equipment. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Max operating pressure 5.9 bar. Cold water only

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

240704714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. When used where the risk is greater than FC3, IRN 415 applies.

Size:

¾” BSP (F) Captive nut

Marking:

HYDRO on front panel.

Installation Requirements:

R001 R040 R160

Expiry date:

31/07/2029

Model:

HYDSP0121 LiquidSense Pro HYDSP0122 LiquidSense Pro HYDSP0123 LiquidSense Pro HYDSP6347 Penguin Pro HYDSP6348 Penguin Pro HYDSP6997 Penguin HYD85125GB EvoDose HYD850353GB EvoDose HYD859411GB EvoDose HYD39111GB Accudose 2 HYD39101GB Accudose 2

Product Images

Approval Holder:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

Manufacturer:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207089

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

CORE model, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

CORE (35, 50, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). CORE (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). CORE (8, & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). CORE (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2310157

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

2” or 2 ½” BSP (F)

Marking:

CORE, model, pressure, capacity and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: CORE 1000 Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: CORE 750L

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Fixed filling loop assembly comprising of a lever operated brass spherical valve, an angled non-verifiable double check valve/spherical valve assembly (suitable for backflow protection against fluid category 3), brass adaptors and a copper connecting elbow fitting. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1015 Filling Loop

Size:

½” BSP captive nut (F)

Marking:

CQI Logo, PN, date of manufacture (MM-YY), flow arrow & CR on body of double check valve/spherical valve.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

734580

Approval Holder:

CQI Ltd. T/A Embrass Peerless

Company Name

CQI Ltd. T/A Embrass Peerless

Address

5 Monkspath Business Park Shirley West Midlands

Postcode

B90 4NY

Phone

Tel: 0247 6374403 Fax: 0247 6347417

View All Listings by this Company

In-line water filter and housing with polypropylene body. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” pushfit

Marking:

PROBOIL, model and technical information on adhesive label on body

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/08/2029

Model:

PT1201RMC, PT1204, PT1206, HK1076 & HK1077 INLINE WATER FILTER AND HOUSING

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road Barnsley

Postcode

S75 1HT

Country

United Kingdom

Phone

01226 283434

General Email

info@abode.eu

View All Listings by this Company

Range of Stainless-Steel pipes and fittings. Models OT 100 are manufactured to EN 10217-7, all other models are manufactured to EN 10253-4. Fittings and pipe are connected via welding. Maximum working pressure; OT 100 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 110 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 200 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 201 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 212 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 213 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 214 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 400 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 401 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 410 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar OT 411 DN15 - DN 200 25 Bar, DN200 – DN350 16 Bar Type 37 DN15 – DN125 16 Bar, DN150 10 Bar Type 37M DN15 – DN80 16 Bar, DN100 10 Bar Maximum operating temperature – 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240602009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

OT 100 – DN15 – DN350 OT 110 – DN15 – DN350 OT 200 – DN15 – DN350 OT 201 – DN80 – DN350 OT 212 – DN15 – DN350 OT 213 – DN80 – DN350 OT 214 – DN80 – DN350 OT 400 – DN15x6 – DN350x300 OT 401 – DN15x6 – DN350x300 OT 410 – DN20x15 – DN350x300 OT 411 – DN20x15 – DN350x300 Type 37 – DN15 – DN150 Type 37M – DN15 – DN100

Marking:

PCM logo, Size, Standard, Matl Grade, Batch no., country of origin on fitting body. OSTP, Size, Standard, Matl Grade, Batch no., country of origin on pipe

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

OT 100 – DN15 – DN350 OT 110 – DN15 – DN350 OT 200 – DN15 – DN350 OT 201 – DN80 – DN350 OT 212 – DN15 – DN350 OT 213 – DN80 – DN350 OT 214 – DN80 – DN350 OT 400 – DN15x6 – DN350x300 OT 401 – DN15x6 – DN350x300 OT 410 – DN20x15 – DN350x300 OT 411 – DN20x15 – DN350x300 Type 37 – DN15 – DN150 Type 37M – DN15 – DN100

Product Images

Approval Holder:

OSTP Holding OY

Company Name

OSTP Holding OY

Address

Ahventie 4 A318 02170 Espoo

Country

Finland

Phone

+44 (0) 1694 771858

General Email

doug.chamberlain@ostp.biz

View All Listings by this Company

Manufacturer:

OSTP Finland Oy Ab. & OSTP Sweden AB & PCM Technology OY

Company Name

OSTP Finland Oy Ab. & OSTP Sweden AB & PCM Technology OY

Address

OSTP Holding OY Ahventie 4A10 02170 Espoo

Country

Finland

General Email

sales@ostp.biz

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107341

Size:

See model

Marking:

Flowflex logo, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

CU Press Equal Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Crossover 15mm, 22mm, 28mm CU Press Street Crossover 15mm, 22mm, 28mm CU Press Street Coupling 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Tee 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU PRESS REDUCED BRANCH TEE CU PRESS REDUCED END AND BRANCH TEE CU PRESS REDUCED END TEE 15x15x22mm;22x15x15mm;22x15x22mm 22x22x15mm;22x22x28mm;28x15x15mm 28x15x22mm;28x22x15mm;28x22x22mm 28x22x28mm;28x28x15mm;28x28x22mm 28x28x35mm;35x22x22mm;35x22x35mm 35x28x22mm;35x28x28mm;35x28x35mm 35x35x15mm;35x35x22mm;35x35x28mm 40x28x28mm;42x35x35mm;42x28x42mm 42x35x42mm;42x42x15mm;42x42x22mm 42X42X28mm;42X42X35mm;54X54X15mm 54X54X28mm;54X54X35mm;54X42X42mm 54X54X42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS STOP END 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

‘ZL’ range of U profile press fittings (nickel plated brass bodies) for use with ‘ZL’ range of PERT/AL/PERT multi-layered pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

240704717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 32mm

Marking:

Zhongliang and size on crimp of the body Zhongliang and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Equal Straight Union ZL-KY101-S1616 S16X16 ZL-KY101-S2020 S20X20 ZL-KY101-S2525 S25X25 ZL-KY101-S3232 S32X32 Unequal Straight Union ZL-KY102-S2016 S20X16 ZL-KY102-S2516 S25X16 ZL-KY102-S2520 S25X20 ZL-KY102-S3216 S32X16 ZL-KY102-S3220 S32X20 ZL-KY102-S3225 S32X25 Male Straight Union ZL-KY103-S1612M S 16X1/2M ZL-KY103-S1634M S 16X3/4M ZL-KY103-S2012M S 20X1/2M ZL-KY103-S2034M S 20X3/4M ZL-KY103-S2512M S 25X1/2M ZL-KY103-S2534M S 25X3/4M ZL-KY103-S2511M S25X1M ZL-KY103-S3234M S 32X3/4M ZL-KY103-S3211M S 32X1M Female Straight Union ZL-KY104-S1612F S 16X1/2 F ZL-KY104-S1634F S 16X3/4 F ZL-KY104-S2012F S 20X1/2 F ZL-KY104-S2034F S 20X3/4 F ZL-KY104-S2534F S 25X3/4 F ZL-KY104-S2511F S 25X1 F ZL-KY104-S3234F S 32X3/4 F ZL-KY104-S3211F S 32X1 F Swivel Coupling ZL-KY105-1612F 16X1/2F ZL-KY105-2012F 20X1/2F ZL-KY105-2034F 20X3/4F ZL-KY105-2534F 25X3/4F Equal Elbow ZL-KY106-L1616 L 16X16 ZL-KY106-L2020 L 20X20 ZL-KY106-L2525 L 25X25 ZL-KY106-L3232 L 32X32 Female Elbow ZL-KY107-L1612F L 16X1/2 F ZL-KY107-L1634F L 16X3/4 F ZL-KY107-L2012F L 20X1/2 F ZL-KY107-L2034F L 20X3/4 F ZL-KY107-L2534F L 25X3/4 F ZL-KY107-L2511F L 25X1 F ZL-KY107-L3211F L 32X1 F Male Elbow ZL-KY108-L1612M L16x1/2M ZL-KY108-L2012M L20x1/2M ZL-KY108-L2034M L20X3/4M ZL-KY108-L2534M L25x3/4M ZL-KY108-L3211M L32x1M Swivel Elbow ZL-KY109-1612F 16X1/2F ZL-KY109-2034F 20X3/4F Equal Tee ZL-KY110-T161616 T 16X16X16 ZL-KY110-T202020 T 20X20X20 ZL-KY110-T252525 T 25X25X25 ZL-KY110-T323232 T 32X32X32 Unequal Tee ZL-KY111-T162016 T 16X20X16 ZL-KY111-T201616 T 20X16X16 ZL-KY111-T201620 T20X16X20 ZL-KY111-T202016 T20X20X16 ZL-KY111-T251625 T 25X16X25 ZL-KY111-T252516 T 25X25X16 ZL-KY111-T251616 T25X16X16 ZL-KY111-T252020 T 25X20X20 ZL-KY111-T252025 T 25X20X25 ZL-KY111-T321632 T32X16X32 ZL-KY111-T322032 T32X20X32 ZL-KY111-T322525 T32X25X25 ZL-KY111-T322532 T32X25X32 Female Tee ZL-KY112-T2512F25 T25X1/2FX25 Elbow With Plate-Male ZL-KY114-1612M 16X1/2M ZL-KY114-1634M 16X3/4 M ZL-KY114-2034M 20X3/4 M Elbow with Plate-Female ZL-KY115-1612F 16X1/2 F ZL-KY115-1634F 16X3/4F ZL-KY115-2012F 20X1/2F ZL-KY115-2034F 20X3/4F End cap ZL-KY116-16 16 ZL-KY116-20 20 ZL-KY116-25 25 ‘ZL' range of PERT/AL/PERT multi-layer pipes. BWRB1620100 16*2.0 BWRB2020200 20*2.0 BTRB2525100 25*2.5 BTRB3230100 32*3.0

Product Images

Approval Holder:

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Address

122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City

Country

China

View All Listings by this Company

Manufacturer:

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Address

122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City

Country

China

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101377

Size:

see model

Marking:

JD PRESS, JD logo, WRAS, date of manufacture MM/YY and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

JDF22015SS STRAIGHT COUPLING 15mm JDF22018SS STRAIGHT COUPLING 18mm JDF22022SS STRAIGHT COUPLING 22mm JDF22028SS STRAIGHT COUPLING 28mm JDF22035SS STRAIGHT COUPLING 35mm JDF22042SS STRAIGHT COUPLING 42mm JDF22054SS STRAIGHT COUPLING 54mm JDF22115SS SLIP COUPLING 15mm JDF22118SS SLIP COUPLING 18mm JDF22122SS SLIP COUPLING 22mm JDF22128SS SLIP COUPLING 28mm JDF22135SS SLIP COUPLING 35mm JDF22142SS SLIP COUPLING 42mm JDF22154SS SLIP COUPLING 54mm JDF9015SS 90 DEG ELBOW 15mm JDF9018SS 90 DEG ELBOW 18mm JDF9022SS 90 DEG ELBOW 22mm JDF9028SS 90 DEG ELBOW 28mm JDF9035SS 90 DEG ELBOW 35mm JDF9042SS 90 DEG ELBOW 42mm JDF9054SS 90 DEG ELBOW 54mm JDF9215SS 90 DEG M&F ELBOW 15mm JDF9218SS 90 DEG M&F ELBOW 18mm JDF9222SS 90 DEG M&F ELBOW 22mm JDF9228SS 90 DEG M&F ELBOW 28mm JDF9235SS 90 DEG M&F ELBOW 35mm JDF9242SS 90 DEG M&F ELBOW 42mm JDF9254SS 90 DEG M&F ELBOW 54mm JDF12015SS 45 DEG ELBOW 15mm JDF12018SS 45 DEG ELBOW 18mm JDF12022SS 45 DEG ELBOW 22mm JDF12028SS 45 DEG ELBOW 28mm JDF12035SS 45 DEG ELBOW 35mm JDF12042SS 45 DEG ELBOW 42mm JDF12054SS 45 DEG ELBOW 54mm JDF12115SS 45 DEG M&F ELBOW 15mm JDF12118SS 45 DEG M&F ELBOW 18mm JDF12122SS 45 DEG M&F ELBOW 22mm JDF12128SS 45 DEG M&F ELBOW 28mm JDF12135SS 45 DEG M&F ELBOW 35mm JDF12142SS 45 DEG M&F ELBOW 42mm JDF12154SS 45 DEG M&F ELBOW 54mm JDF13015SS TEE 15mm JDF13018SS TEE 18mm JDF13022SS TEE 22mm JDF13028SS TEE 28mm JDF13035SS TEE 35mm JDF13042SS TEE 42mm JDF13054SS TEE 54mm JDF13018X15SS REDUCING TEE 18mmx15mm JDF13022X15SS REDUCING TEE 22mmx15mm JDF13022X18SS REDUCING TEE 22mmx18mm JDF13028X15SS REDUCING TEE 28mmx15mm JDF13028X18SS REDUCING TEE 28mmx18mm JDF13028X22SS REDUCING TEE 28mmx22mm JDF13035X15SS REDUCING TEE 35mmx15mm JDF13035X18SS REDUCING TEE 35mmx18mm JDF13035X22SS REDUCING TEE 35mmx22mm JDF13035X28SS REDUCING TEE 35mmx28mm JDF13042X15SS REDUCING TEE 42mmx15mm JDF13042X18SS REDUCING TEE 42mmx18mm JDF13042X22SS REDUCING TEE 42mmx22mm JDF13042X28SS REDUCING TEE 42mmx28mm JDF13042X35SS REDUCING TEE 42mmx35mm JDF13054X15SS REDUCING TEE 54mmx15mm JDF13054X18SS REDUCING TEE 54mmx18mm JDF13054X22SS REDUCING TEE 54mmx22mm JDF13054X28SS REDUCING TEE 54mmx28mm JDF13054X35SS REDUCING TEE 54mmx35mm JDF13054X42SS REDUCING TEE 54mmx42mm JDF1315X1/2BSPSS FEMALE ADAPTER 15mm×Rp1/2’’ JDF1322X3/4BSPSS FEMALE ADAPTER 22mm×Rp3/4” JDF1328X1BSPSS FEMALE ADAPTER 28mm×Rp1” JDF1335X11/4BSPSS FEMALE ADAPTER 35mm×Rp1‐1/4” JDF1342X11/2BSPSS FEMALE ADAPTER 42mm×Rp1‐1/2” JDF1354X2BSPSS FEMALE ADAPTER 54mm×Rp2” JDF1215X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 15mm×G1/2” JDF1218X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 18mm×G1/2” JDF1222X3/4BSPSS STRAIGHT SWIVEL CONNECTOR 22mm×G3/4” JDF1228X1BSPSS STRAIGHT SWIVEL CONNECTOR 28mm×G1” JDF1235X11/4BSPSS STRAIGHT SWIVEL CONNECTOR 35mm×G1‐1/4” JDF1242X11/2BSPSS STRAIGHT SWIVEL CONNECTOR 42mm×G1‐1/2” JDF1254X2BSPSS STRAIGHT SWIVEL CONNECTOR 54mm×G2” JDF1415X1/2BSPTSS MALE ADAPTER 15mm×R1/2” JDF1418X1/2BSPTSS MALE ADAPTER 18mm×R1/2” JDF1422X3/4BSPTSS MALE ADAPTER 22mm×R3/4” JDF1428X1BSPTSS MALE ADAPTER 28mm×R1” JDF1435X11/4BSPTSS MALE ADAPTER 35mm×R1‐1/4” JDF1442X11/2BSPTSS MALE ADAPTER 42mm×R1‐1/2” JDF1454X2BSPTSS MALE ADAPTER 54mm×R2” JDF2115X1/2BSPSS Female elbow 15mm×Rp1/2” JDF2118X1/2BSPSS Female elbow 18mm×Rp1/2” JDF2122X3/4BSPSS Female elbow 22mm×Rp3/4” JDF2128X1BSPSS Female elbow 28mm×Rp1” JDF2135X11/4BSPSS Female elbow 35mm×Rp1‐1/4” JDF2142X11/2BSPSS Female elbow 42mm×Rp1‐1/2” JDF2154X2BSPSS Female elbow 54mm×Rp2” JDF2315X1/2BSPTSS Male elbow 15mm×R1/2” JDF2318X1/2BSPTSS Male elbow 18mm×R1/2” JDF2322X1/2BSPTSS Male elbow 22mm×R1/2” JDF2322X3/4BSPTSS Male elbow 22mm×R3/4” JDF2328X1BSPTSS Male elbow 28mm×R1” JDF2335X11/4BSPTSS Male elbow 35mm×R1‐1/4” JDF2342X11/2BSPTSS Male elbow 42mm×R1‐1/2” JDF2354X2BSPTSS Male elbow 54mm×R2” JDF13115X1/2BSPSS PRESS X BSP TEE 15mm×Rp1/2” JDF13118X1/2BSPSS PRESS X BSP TEE 18mm×Rp1/2” JDF13122X3/4BSPSS PRESS X BSP TEE 22mm×Rp3/4” JDF13128X1/2BSPSS PRESS X BSP TEE 28mm×Rp1/2 JDF13128X1BSPSS PRESS X BSP TEE 28mm×Rp1” JDF13135X11/4BSPSS PRESS X BSP TEE 35mm×Rp1‐1/4” JDF13142X11/2BSPSS PRESS X BSP TEE 42mm×Rp1‐1/2” JDF13154X2BSPSS PRESS X BSP TEE 54mm×Rp2” JDF2515X1/2BSPTSS PRESS X BSPT TEE 15mm×R1/2” JDF2518X1/2BSPTSS PRESS X BSPT TEE 18mm×R1/2” JDF2522X3/4BSPTSS PRESS X BSPT TEE 22mm×R3/4” JDF2528X1/2BSPTSS PRESS X BSPT TEE 28 mm×R1/2’’ JDF2528X1BSPTSS PRESS X BSPT TEE 28mm×R1” JDF2535X11/4BSPTSS PRESS X BSPT TEE 35mm×R1‐1/4” JDF2542X11/2BSPTSS PRESS X BSPT TEE 42mm×R1‐1/2” JDF2554X2BSPTSS PRESS X BSPT TEE 54mm×R2” JDF2618X15SS Reducer-A 18mm×15mm JDF2622X15SS Reducer-A 22mm×15mm JDF2622X18SS Reducer-A 22mm×18mm JDF2628X15SS Reducer-A 28mm×15mm JDF2628X18SS Reducer-A 28mm×18mm JDF2628X22SS Reducer-A 28mm×22mm JDF2635X15SS Reducer-A 35mm×15mm JDF2635X18SS Reducer-A 35mm×18mm JDF2635X22SS Reducer-A 35mm×22mm JDF2635X28SS Reducer-A 35mm×28mm JDF2642X15SS Reducer-A 42mm×15mm JDF2642X18SS Reducer-A 42mm×18mm JDF2642X22SS Reducer-A 42mm×22mm JDF2642X28SS Reducer-A 42mm×28mm JDF2642X35SS Reducer-A 42mm×35mm JDF2654X42SS Reducer-A 54mm×42mm JDF24018X15SS COUPLING REDUCER 18mmx15mm JDF24022X15SS COUPLING REDUCER 22mmx15mm JDF24022X18SS COUPLING REDUCER 22mmx18mm JDF24028X15SS COUPLING REDUCER 28mmx15mm JDF24028X18SS COUPLING REDUCER 28mmx18mm JDF24028X22SS COUPLING REDUCER 28mmx22mm JDF24035X15SS COUPLING REDUCER 35mmx15mm JDF24035X18SS COUPLING REDUCER 35mmx18mm JDF24035X22SS COUPLING REDUCER 35mmx22mm JDF24035X28SS COUPLING REDUCER 35mmx28mm JDF24042X15SS COUPLING REDUCER 42mmx15mm JDF24042X18SS COUPLING REDUCER 42mmx18mm JDF24042X22SS COUPLING REDUCER 42mmx22mm JDF24042X28SS COUPLING REDUCER 42mmx28mm JDF24042X35SS COUPLING REDUCER 42mmx35mm JDF24054X15SS COUPLING REDUCER 54mmx15mm JDF24054X18SS COUPLING REDUCER 54mmx18mm JDF24054X22SS COUPLING REDUCER 54mmx22mm JDF24054X28SS COUPLING REDUCER 54mmx28mm JDF24054X35SS COUPLING REDUCER 54mmx35mm JDF24054X42SS COUPLING REDUCER 54mmx42mm

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

Range of M profile press fit fittings with a brass body and NBR O-rings, for use with copper pipe manufactured to EN1057 and stainless-steel pipe manufactured to EN10312. Maximum working pressure: 10 Bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

E logo and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Straight adaptor - Press fit x Female: 2PSFe1501 - 15MM x 1/2" (F) BSP, 2PSFe1502 - 15MM x 3/4" (F) BSP, 2PSFe2201 - 22MM x 1/2" (F) BSP, 2PSFe2202 - 22MM x 3/4" (F) BSP, 2PSFe2203 - 22MM x 1" (F) BSP, 2PSFe2802 - 28MM x 3/4" (F) BSP, 2PSFe2803 - 28MM x 1" (F) BSP, 2PSFe3503 - 35MMx 1" (F) BSP, 2PSFe3504 - 35MM X 11/4" (F) BSP, 2PSFe4205 - 42MM X 11/2" (F) BSP, 2PSFe5406 - 54MM X 2" (F) BSP. Straight adaptor - Press fit x Male: 2PSKe1501 - 15MM X 1/2" (M) BSP, 2PSKe1502 - 15MM X 3/4"(M) BSP, 2PSKe2201 - 22MM X 1/2" (M) BSP, 2PSKe2202 - 22MM X 3/4" (M) BSP, 2PSKe2203 - 22MM X 1" (M) BSP, 2PSKe2802 - 28MM X 3/4" (M) BSP, 2PSKe2803 - 28MM X 1" (M) BSP, 2PSKe3503 - 35MM X 1" (M) BSP, 2PSKe3504 - 35MM X 11/4" (M) BSP, 2PSKe4205 - 42MM X 11/2" (M) BSP, 2PSKe5406 - 54MM X 2" (M) BSP. Straight adaptor - Press fit x Swivel Female: 2PSQe1501 - 15MM X 1/2" (F) BSP SWIVEL, 2PSQe1502 - 15MM X 3/4" (F) BSP SWIVEL, 2PSQe2202 - 22MM X 3/4" (F) BSP SWIVEL, 2PSQe2203 - 22MM X 1" (F) BSP SWIVEL, 2PSQe2803 - 28MM X 1" (F) BSP SWIVEL, 2PSQe2804 - 28MM X 11/4" (F) BSP SWIVEL. Straight pipe union coupling - Press fit x Female/Male: 2PSHe1501 - 15MM X 1/2" (M) BSP UNION, 2PSHe2202 - 22MM X 3/4" (M) BSP UNION, 2PSHe2803 - 28MM X 1" (M) BSP UNION, 2PSHe3504 - 35MM X 1 1/4" (M) BSP UNION, 2PSHe4205 - 42MM X 1 1/2" (M) BSP UNION, 2PSHe5406 - 54MM X 2" (M) BSP UNION, 2PSGe1501 - 15MM X 1/2" (F) BSP UNION, 2PSGe2202 - 22MM X 3/4"(F) BSP UNION, 2PSGe2803 - 28MM X 1"(F) BSP UNION, 2PSGe3504 - 35MM X 1 1/4" (F) BSP UNION, 2PSGe4205 - 42MM X 1 1/2"(F) BSP UNION, 2PSGe5406 - 54MM X 2"(F) BSP UNION. 90°Elbow adaptor- Press fit x Female/Male: 2PSFe1501E - 15MM X 1/2" (F) BSP, 2PSFe2202E - 22MM X 3/4" (F) BSP, 2PSFe2803E - 28MM X 1" (F) BSP, 2PSKe1501E - 15MM X 1/2" (M) BSP, 2PSKe2202E - 22MM X 3/4" (M) BSP, 2PSKe2803E - 28MM X 1" (M) BSP. Elbow Wall Plate - Press fit x Female: 2PSRe1501 - 15MM X 1/2" (F) BSP. Branch Tee: Press fit x Female x Press fit: 2PSJe151501 - 15MM X 15MM X 1/2" (F) BSP, 2PSJe222201 - 22MM X 22MM X 1/2" (F) BSP, 2PSJe222202 - 22MM X 22MM X 34" (F) BSP, 2PSJe282801 - 28MM X 28MM X 1/2" (F) BSP, 2PSJe282802 - 28MM X 28MM X 3/4" (F) BSP, 2PSJe353501 - 35MM X 35MM X 1/2" (F) BSP, 2PSJe424201 - 42MM X 42MM X 1/2" (F) BSP, 2PSJe545401 - 54MM X 54MM X 1/2" (F) BSP.

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure: Fittings 15mm to 28mm 10.0 bar. Fittings 35mm to 54mm 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

Tectite 316 & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

15mm TS1/TS270 Coupling 18mm TS1/TS270 Coupling 22mm TS1/TS270 Coupling 28mm TS1/TS270 Coupling 35mm TS1/TS270 Coupling 42mm TS1/TS270 Coupling 54mm TS1/TS270 Coupling 15mm TS1S/TS270S Slip Coupling 18mm TS1S/TS270S Slip Coupling 22mm TS1S/TS270S Slip Coupling 28mm TS1S/TS270S Slip Coupling 15mm x 1/2" TS2/TS270G Connector 18mm x 3/4" TS2/TS270G Connector 18mm x 1/2" TS2/TS270G Connector 22mm x 3/4" TS2/TS270G Connector 22mm x 1/2" TS2/TS270G Connector 22mm x 1" TS2/TS270G Connector 28mm x 3/4" TS2/TS270G Connector 28mm x 1" TS2/TS270G Connector 35mm x 1 1/4" TS2/TS270G Connector 42mm x 1 1/2" TS2/TS270G Connector 54mm x 2" TS2/TS270G Connector 15mm x 1/2" TS3/TS243G Connector 18mm x 3/4" TS3/TS243G Connector 18mm x 1/2" TS3/TS243G Connector 22mm x 3/4" TS3/TS243G Connector 22mm x 1/2" TS3/TS243G Connector 28mm x 3/4" TS3/TS243G Connector 28mm x 1" TS3/TS243G Connector 35mm x 1 1/4" TS3/TS243G Connector 42mm x 1 1/2" TS3/TS243G Connector 54mm x 2" TS3/TS243G Connector 18 x 15mm TS6/TS243 Reducer 22 x 15mm TS6/TS243 Reducer 22 x 18mm TS6/TS243 Reducer 28 x 15mm TS6/TS243 Reducer 28 x 18mm TS6/TS243 Reducer 28 x 22mm TS6/TS243 Reducer 35 x 22mm TS6/TS243 Reducer 35 x 28mm TS6/TS243 Reducer 42 x 22mm TS6/TS243 Reducer 42 x 28mm TS6/TS243 Reducer 42 x 35mm TS6/TS243 Reducer 54 x 35mm TS6/TS243 Reducer 54 x 42mm TS6/TS243 Reducer 15mm TS12/TS090 Elbow 18mm TS12/TS090 Elbow 22mm TS12/TS090 Elbow 28mm TS12/TS090 Elbow 35mm TS12/TS090 Elbow 42mm TS12/TS090 Elbow 54mm TS12/TS090 Elbow 15mm TS12S/TS092 Street Elbow 18mm TS12S/TS092 Street Elbow 22mm TS12S/TS092 Street Elbow 28mm TS12S/TS092 Street Elbow 15mm x 1/2" TS13/TS092G Elbow 18mm x 1/2" TS13/TS092G Elbow 22mm x 3/4" TS13/TS092G Elbw , 28mm x 1" TS13/TS092G Elbow 15mm x 1/2" TS14/TS090G Elbow 18mm x 1/2" TS14/TS090G Elbow 18mm x 3/4" TS14/TS090G Elbow 22mm x 3/4" TS14/TS090G Elbow 28mm x 1" TS14/TS090G Elbow 15mm x 1/2" TS15/TS471G Backplate Elbow 18mm x 1/2" TS15/TS471G Backplate Elbow 22mm x 3/4" TS15/TS471G Backplate Elbow 15mm TS18/TS002A Slow Bend 18mm TS18/TS002A Slow Bend 22mm TS18/TS002A Slow Bend 28mm TS18/TS002A Slow Bend 35mm TS18/TS002A Slow Bend 42mm TS18/TS002A Slow Bend 54mm TS18/TS002A Slow Bend 15mm TS18S/TS001 Elbow 18mm TS18S/TS001 Elbow 22mm TS18S/TS001 Elbow 28mm TS18S/TS001 Elbow 15mm TS21/TS041 Obtuse Elbow 18mm TS21/TS041 Obtuse Elbow 22mm TS21/TS041 Obtuse Elbow 28mm TS21/TS041 Obtuse Elbow 35mm TS21/TS041 Obtuse Elbow 42mm TS21/TS041 Obtuse Elbow 54mm TS21/TS041 Obtuse Elbow 15mm TS21S/TS040 Obtuse Street Elbow 18mm TS21S/TS040 Obtuse Street Elbow 22mm TS21S/TS040 Obtuse Street Elbow 28mm TS21S/TS040 Obtuse Street Elbow 35mm TS21S/TS040 Obtuse Street Elbow 42mm TS21S/TS040 Obtuse Street Elbow 15mm TS24/TS130 Tee 18mm TS24/TS130 Tee 22mm TS24/TS130 Tee 28mm TS24/TS130 Tee 35mm TS24/TS130 Tee 42mm TS24/TS130 Tee 54mm TS24/TS130 Tee 18 x 18 x 15mm TS25/TS130 Tee 22 x 22 x 15mm TS25/TS130 Tee 22 x 22 x 18mm TS25/TS130 Tee 28 x 28 x 15mm TS25/TS130 Tee 28 x 28 x 18mm TS25/TS130 Tee 28 x 28 x 22mm TS25/TS130 Tee 35 x 35 x 15mm TS25/TS130 Tee 35 x 35 x 22mm TS25/TS130 Tee 35 x 35 x 28mm TS25/TS130 Tee 42 x 42 x 28mm TS25/TS130 Tee 54 x 54 x 22mm TS25/TS130 Tee 54 x 54 x 28mm TS25/TS130 Tee 15 x 15mm x 1/2" TS30/TS130G Tee 18 x 18mm x 1/2" TS30/TS130G Tee 22 x 22mm x 1/2" TS30/TS130G Tee 22 x 22mm x 3/4" TS30/TS130G Tee 28 x 28mm x 1/2" TS30/TS130G Tee 35 x 35mm x 1/2" TS30/TS130G Tee 42 x 42mm x 1/2" TS30/TS130G Tee 15mm TS61/TS301 Stop End 18mm TS61/TS301 Stop End 22mm TS61/TS301 Stop End 28mm TS61/TS301 Stop End 35mm TS61/TS301 Stop End 42mm TS61/TS301 Stop End 54mm TS61/TS301 Stop End 15mm x 1/2" TS62/TS062 Tap Connector 22mm x 3/4" TS62/TS062 Tap Connector

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Manufacturer:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of float switches with plastic bodies. Cold water use only.

Section:

1300 Float Operated Electrical Switches

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

N/A – No water pathway

Marking:

TT Pumps logo, CE mark, and technical information on float switch body

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

LT/FLO107/10M, FLO107 Float Switch, Float Switch with 10m Cable. LT/FLO107/15M, FLO107 Float Switch, Float Switch with 15m Cable. LT/FLO107/20M, FLO107 Float Switch, Float Switch with 20m Cable. LT/FLO107/30M, FLO107 Float Switch, Float Switch with 30m Cable. LT/FLO107/40M, FLO107 Float Switch, Float Switch with 40m Cable.

Product Images

Approval Holder:

TT PUMPS LTD

Company Name

TT PUMPS LTD

Address

Onneley Works Newcastle Rd Woore Cheshire

Postcode

CW3 9RU

View All Listings by this Company

Range of dual flush WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240704716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

55.16mm OD

Marking:

ING, Model No. on body

Installation Requirements:

R001 R571 R582

Expiry date:

31/07/2029

Model:

B404001 Mechanical flush valve B405001 Pneumatic flush valve

Product Images

Approval Holder:

Xiamen Ing Sanitary Fittings Ltd.

Company Name

Xiamen Ing Sanitary Fittings Ltd.

Address

2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen

Country

China

Phone

0086 0592 5669770 803

General Email

sales2@ing-sanitary.com

View All Listings by this Company

Manufacturer:

Xiamen Ing Sanitary Fittings Ltd.

Company Name

Xiamen Ing Sanitary Fittings Ltd.

Address

2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen

Country

China

Phone

0086 0592 5669770 803

General Email

sales2@ing-sanitary.com

View All Listings by this Company

Shower wastewater heat recovery unit, consisting of a PVC-U waste pipe with an internal copper tube which provides a double wall separation between the wastewater and cold mains supply. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

1350 Heat Exchangers

WRAS Approval Number:

240602021

Note:

Claims made by the manufacturer on the heat recovery performance have not been assessed as part of the approval.

Size:

½” BSP (M)

Marking:

Zypho logo on body. Zypho logo, model and other information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

ZYSL50GDTP Zypho Slim 50

Product Images

Approval Holder:

Zypho, SA

Company Name

Zypho, SA

Country

Portugal

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Manufacturer:

Zypho, SA

Company Name

Zypho, SA

Country

Portugal

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Range of wall mounted gas fired condensing instantaneous water heaters. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240704704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M) for 10-12L & 14~17L/min (Flow rate) ¾” BSP(M) for 22~26L/min (Flow rate)

Marking:

Company Logo Vanward, model, pressure, tempeture and and other technical info on adhesive label on side panel.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

10~12L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 26, 27, 28, 31, 32, 34 to 35) Casing 1: ST27, S21, Casing 2: ST28, S25, Casing 3: ST29, S22, Casing 4: S21B, Casing 5: S23, Casing 6: S24, Casing 7: S25(A), Casing 8: S25(B), Casing 9: S26, Casing 10: S27, Casing 11: S28, Casing 12: S31, Casing 13: S32, Casing 14: S34, Casing 15: S35. Where a typical code is: ①JSG28-14ST28、JSG14ST-S25: JSG=balance type gas water heater 28=nominal heat input(kW) 14=volume ST28=the type of casing, ST=structure platform S25=the type of casing 14~17L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 27, 28, 31, 32, 34 to 35). Same casings as above but without casing 9. ②JSG14ST-S25(B) 、JSQ28-14ST28 JSG=balance type gas water heater JSQ=forces exhaust type gas water 14=volume 28=nominal heat input(kW) ST=structure platform S25(B)=the type of casing, ST28=the type of casing 22~26L outdoor type gas water heater: JSW=outdoor type gas water heater, a= nominal heat input(kW) (fixed from 44 to 52), b=volume (fixed from 22 to 26), ST58=Wd= the type of casing (d fixed from 81, 82, 83 to 84), Casing 1: ST58, W81, Casing 2: W82, Casing 3: W83, Casing 4: W84. ③JSW44-22ST58、 JSW22HT-W81: JSW=outdoor type gas water heater 44=nominal heat input(kW) 22=volume ST58=the type of casing, HT=structure platform W81=the type of casing

JSG20-10ST27, JSG10ST-S21, JSQ20-10ST27, JSQ10ST-S21, JSG22-11ST27, JSG11ST-S21, JSQ22-11ST27, JSQ11ST-S21, JSG24-12ST27, JSG12ST-S21, JSQ24-12ST27, JSQ12ST-S21, JSG20-10ST28, JSG10ST-S25, JSQ20-10ST28, JSQ10ST-S25, JSG22-11ST28, JSG11ST-S25, JSQ22-11ST28, JSQ11ST-S25, JSG24-12ST28, JSG12ST-S25, JSQ24-12ST28, JSQ12ST-S25, JSG20-10ST29, JSG10ST-S22, JSQ20-10ST29, JSQ10ST-S22, JSG22-11ST29, JSG11ST-S22, JSQ22-11ST29, JSQ11ST-S22, JSG24-12ST29, JSG12ST-S22, JSQ24-12ST29, JSQ12ST-S22, JSG10ST-S21B, JSQ10ST-S21B, JSG11ST-S21B, JSQ11ST-S21B, JSG12ST-S21B, JSQ12ST-S21B, JSG10ST-S23, JSQ10ST-S23, JSG11ST-S23, JSQ11ST-S23, JSG12ST-S23, JSQ12ST-S23, JSG10ST-S24, JSQ10ST-S24, JSG11ST-S24, JSQ11ST-S24, JSG12ST-S24, JSQ12ST-S24, JSG10ST-S25(A), JSQ10ST-S25(A), JSG11ST-S25(A), JSQ11ST-S25(A), JSG12ST-S25(A), JSQ12ST-S25(A), JSG10ST-S25(B), JSQ10ST-S25(B), JSG11ST-S25(B), JSQ11ST-S25(B), JSG12ST-S25(B), JSQ12ST-S25(B), JSG10ST-S26, JSQ10ST-S26, JSG12ST-S26, JSQ12ST-S26, JSG10ST-S27, JSQ10ST-S27, JSG12ST-S27, JSQ12ST-S27, JSG10ST-S28, JSQ10ST-S28, JSG12ST-S28, JSQ12ST-S28, JSG10ST-S31, JSQ10ST-S31, JSG12ST-S31, JSQ12ST-S31, JSG10ST-S32, JSQ10ST-S32, JSG12ST-S32, JSQ12ST-S32, JSG10ST-S34, JSQ10ST-S34, JSG12ST-S34, JSQ12ST-S34, JSG10ST-S35, JSQ10ST-S35, JSG11ST-S35, JSQ11ST-S35, JSG12ST-S35, JSQ12ST-S35. JSG28-14ST27, JSG14ST-S21, JSQ28-14ST27, JSQ14ST-S21, JSG30-16ST27, JSG16ST-S21, JSQ30-16ST27, JSQ16ST-S21, JSG31-17ST27, JSG17ST-S21, JSQ31-17ST27, JSQ17ST-S21, JSG28-14ST28, JSG14ST-S25, JSQ28-14ST28, JSQ14ST-S25, JSG30-16ST28, JSG16ST-S25, JSQ30-16ST28, JSQ16ST-S25, JSG31-17ST28, JSG17ST-S25, JSQ31-17ST28, JSQ17ST-S25, JSG28-14ST29, JSG14ST-S22, JSQ28-14ST29, JSQ14ST-S22, JSG30-16ST29, JSG16ST-S22, JSQ30-16ST29, JSQ16ST-S22, JSG31-17ST29, JSG17ST-S22, JSQ31-17ST29, JSQ17ST-S22, JSG14ST-S21B, JSQ14ST-S21B, JSG16ST-S21B, JSQ16ST-S21B, JSG17ST-S21B, JSQ17ST-S21B, JSG14ST-S23, JSQ14ST-S23, JSG16ST-S23, JSQ16ST-S23, JSG17ST-S23, JSQ17ST-S23, JSG14ST-S24, JSQ14ST-S24, JSG16ST-S24, JSQ16ST-S24, JSG17ST-S24, JSQ17ST-S24, JSG14ST-S25(A), JSQ14ST-S25(A), JSG16ST-S25(A), JSQ16ST-S25(A), JSG17ST-S25(A), JSQ17ST-S25(A), JSG14ST-S25(B), JSQ14ST-S25(B), JSG16ST-S25(B), JSQ16ST-S25(B), JSG17ST-S25(B), JSQ17ST-S25(B), JSG14ST-S27, JSQ14ST-S27, JSG16ST-S27, JSQ16ST-S27, JSG14ST-S28, JSQ14ST-S28, JSG16ST-S28, JSQ16ST-S28, JSG14ST-S31, JSQ14ST-S31, JSG16ST-S31, JSQ16ST-S31, JSG14ST-S32, JSQ14ST-S32, JSG16ST-S32, JSQ16ST-S32, JSG14ST-S34, JSQ14ST-S34, JSG16ST-S34, JSQ16ST-S34, JSG14ST-S35, JSQ14ST-S35,JSG16ST-S35, JSQ16ST-S35. JSW44-22ST58, JSW22HT-W81, JSW52-26ST58, JSW26HT-W81, JSW22HT-W82, JSW26HT-W82, JSW22HT-W83, JSW26HT-W83, JSW22HT-W84, JSW26HT-W84.

Product Images

Approval Holder:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Manufacturer:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20, DN25, DN32, DN40, DN50.

Marking:

NWM, Ningbo Water Meter Co., Ltd logo and technical information on meter face. Flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

MJ-SDC range.

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

CZUS & Company logo on cap. Company Information,, product information and model range on label under the plastic lid.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

CZUS 13905XXX DN: 40 mm (Composite Body, 2" BSP (M) 1CZUS 13915XXX COMPOSITE BODY DN: 50 mm 2.1/4" BSP (M) CZUS 139XXXXX IRON BODY DN: 50-300 mm (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Approval Holder:

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Company Name

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Address

Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Range of inline and manifold water meters with brass bodies and stainless-steel strainers on the inlets. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Inline models. 1" BSP (M) Manifold models 1 ½” BSP (M)

Marking:

Itron logo, model code, serial number, date of manufacture (YYYY) on dial face.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

P50-I Aquadis+ DN20 inline P50-M Aquadis+ DN20 manifold

Product Images

Approval Holder:

Itron Metering Solutions UK Ltd

Company Name

Itron Metering Solutions UK Ltd

Address

Unit 10, Haven Exchange Felixstowe Suffolk

Postcode

IP11 2QX

Phone

+44 161 865 1181

View All Listings by this Company

Manufacturer:

ITRON France SAS

Company Name

ITRON France SAS

Address

9 rue Ampère Mâcon

Postcode

71031

Country

France

Phone

+33 6 43 94 48 08

View All Listings by this Company

Range of ultrasonic in-line water meters with brass bodies, inlets incorporating plastic strainers. Models MA408 – DN15 & DN25 incorporate a non-return valve (not suitable for backflow prevention) at the outlet. Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Kaifa logo, size, pressure and other technical information on faceplate. DN15 marking - Kaifa logo on top of water meter, Kaifa Logo, MM/YY date, serial number, meter parameter and model code.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

MA408 – DN15, DN20, DN25.

Product Images

Approval Holder:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company

Manufacturer:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company

Water meter with a brass body. Maximum working pressure 16 Bar. Maximum operating temperature 90°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) inlet/outlet

Marking:

Diehl logo, Altair, Year of manufacture (YYYY) and product info on face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

ALTAIR V4 T90

Product Images

Approval Holder:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Manufacturer:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company