‘EPS50’ range of stainless-steel axial compensators with threaded end connections and ‘EPSF-10’ range of stainless-steel expansion joints with rotatable flanged end connections. Maximum working pressure: 16bar. Maximum operating temperature: 100°C.

Section:

0870 Tubes

Section Subtitle:

Stainless Steel.

WRAS Approval Number:

251108704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Stenflex is the manufacturer for the EPSF-10 range only.

Size:

See models.

Marking:

EPSF-10: Pipe DN, PN, manufacturer (STENFLEX HAMBURG) etched onto flange. EPS50: Engineered Products & Solutions Ltd, flow arrow, manufacturers item code (M-AX50), PN on adhesive label.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

EPS50-15 ½” BSPT (M), EPS50-20 ¾” BSPT (M), EPS50-25 1” BSPT (M), EPS50-32 1 ¼” BSPT (M), EPS50-40 1 ½” BSPT (M), EPS50-50 2” BSPT (M). EPSF-10-065 65mm Flanged, EPSF-10-080 80mm Flanged, EPSF-10-100 100mm Flanged, EPSF-10-125 125mm Flanged, EPSF-10-150 150mm Flanged, EPSF-10-200 200mm Flanged.

Approval Holder:

Engineered Products & Solutions Ltd

Company Name

Engineered Products & Solutions Ltd

Address

Unit 15 Cedar Court Halesfield 17 Telford

Postcode

TF74FP

Country

United Kingdom

General Email

sales@epands.com

View All Listings by this Company

Range of monochloramine generators incorporating UPVC pipework, fittings and an external flow sensor. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

250302705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP F

Marking:

Sanikill Tec on adhesive label on body

Installation Requirements:

R001 R008 R415 R575

Expiry date:

31/03/2030

Model:

ESKUT-LT1002 SANIKILL Tec 500 g. ESKUT-LT2004 SANIKILL Tec 1 kg.

Approval Holder:

Sanipur S.p.A.

Company Name

Sanipur S.p.A.

Address

Via S. Quasimodo,25 25020 Flero (BS)

Country

Italy

General Email

b.fermi@sanipur.it

View All Listings by this Company

Range of stainless-steel(SS304L) press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

MTF, model number, Size on fitting

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Marla Tube Fittings Limited

Company Name

Marla Tube Fittings Limited

Address

Kinwarton Farm Road Alcester

Postcode

B49 6EH

Country

United Kingdom

Phone

01789 761207

General Email

graham.walker@marla.co.uk

View All Listings by this Company

Range of DZR brass compression fittings for use with Q-Therm PEX-b Pipes (SDR 7.4) Maximum working pressure:20 bar, cold water use only

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm and 20mm

Marking:

Q-THERM, UAE, DZR and SIZE on compression nut. Pipe: “Q-THERM, 16mm х 2.2mm PE-Xb PN20 DIN 16892/93 ISO 15875 7NO 95° WRAS APPROVED MATERIAL HH: MM DD/MM/YYYY Made in UAE(RAK)

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

PX00PS2000Y: Q-Therm PEX-b Pipe, DN 16mm, SDR 7.4, PN20, 16mm x 2.2mm PX00PS2001Y: Q-Therm PEX-b Pipe DN 20mm, SDR 7.4, PN20, 20mm x 2.8mm PXYCBE0001R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCBE0101R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 20mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0001R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0101R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 20mm x ½” BSP (M (DZR Brass Compression Fitting) PXYCMA0001R Q-Therm DZR Brass Male PE-X Adaptor 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCMA0101R Q-Therm DZR Brass Male PE-X Adaptor 20mm x ½” BSP (M) (DZR Brass Compression Fitting)

Manufacturer:

Quantum Industries LLC

Company Name

Quantum Industries LLC

Address

Al Ghail Industrial Park, Ras Al Khaimah, PB 86488

Country

UAE

View All Listings by this Company

Range of Socket weld, Click weld, Butt weld and Electro fusion fittings (see models), for use with ABN//INSTAL CT Faser RD Series 3.2 / SDR 7.4 & ABN//INSTAL CT Faser RD Series 5 / SDR 11 pipe. Maximum working pressure; (see models) Maximum operating temperature; (see models)

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251002034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Polypipe, ABN and size on fitting body. Polypipe, ABN, size, material, series, date of manufacture (DD/MM/YYYY), and DIN8078-2008-09 on the pipe.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

3000.3.Ø.40G - MecFlow Fusion Pipe Plain End Pipe – Series 3, 4m Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C 3000.5.Ø.40G - MecFlow Fusion Pipe Plain End Pipe – Series 5, 4m Ø40-110mm 20.3bar Cold Water Use 8.1bar @ 80°C 3000.5.Ø.58G - MecFlow Fusion Pipe Plain End Pipe – Series 5, 5.8m Ø125-200mm 20.3bar Cold Water Use 8.1bar @ 80°C Ø200-315mm 20.3bar Cold Water Use Only 3011S.ØG - MecFlow Fusion Double Socket Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3004S.Ø.90G - MecFlow Fusion Equal Tee 90° Triple Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3004S.ØXØXØ.90G - MecFlow Fusion Unequal Tee 90° Triple Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm 20.3bar Cold Water Use 8.1bar @ 80°C 3001S.Ø.90G - MecFlow Fusion Elbow 90° Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3001S.Ø.45G - MecFlow Fusion Elbow 45° Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3024S.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3030S.ØG - MecFlow Fusion End Cap Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3080S.ØG - MecFlow Fusion Stub Flange Socket Fitting Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3016S.32X075.90G - MecFlow Fusion Threaded Adaptor – 90° Female Socket / BSP Thread Fitting Ø32mm x ¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.32X190G - MecFlow Fusion Threaded Adaptor – 90° Female Hexagon Socket / BSP Thread Fitting Ø32mm x 1” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.32X075.90G - MecFlow Fusion Threaded Adaptor – 90° Male Socket / BSP Thread Fitting Ø32mm x ¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.32X1.90G - MecFlow Fusion Threaded Adaptor – 90° Male Hexagon Socket / BSP Thread Fitting Ø32mm x 1” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.ØXØG - MecFlow Fusion Threaded Adaptor – Female Socket / BSP Thread Fitting Ø20-32mm x ½-¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.ØXØG - MecFlow Fusion Threaded Adaptor – Female Hexagon Socket / BSP Thread Fitting Ø32mm x 1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼-4” 20.3barCold Water Use 8.1bar @ 80°C 3017S.ØXØG - MecFlow Fusion Threaded Adaptor –Male Socket / BSP Thread Fitting Ø20-32mm x ½-¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.ØXØG - MecFlow Fusion Threaded Adaptor – Male Hexagon Socket / BSP Thread Fitting Ø32mm x 1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3019S.32XØG - MecFlow Fusion Threaded Adaptor – Female Socket / BSP Thread Fitting Ø32mm x 1-1¼” 31.7bar Cold Water Use 8.1bar @ 80°C 3057S.ØXØG - MecFlow Fusion Threaded Adaptor Male Socket / BSP Thread Fitting Ø20-32mm x ½”-1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼”-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3058S.ØXØG - MecFlow Fusion Threaded Adaptor Female Socket / BSP Thread Fitting Ø20-32mm x ½”-1” 31.7bar Cold Water Use 8.1bar @80°C Ø40-110mm x 1¼”-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3010.ØG - MecFlow Fusion Electrofusion Coupler Double Electrofusion Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C Ø160mm 20.3bar Cold Water Use Only 3054.ØXØG - MecFlow Fusion Saddle Male Saddle / Socket Fitting Ø50-200mm X Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø90-200mm X Ø40-63mm 8.1bar @ 80°C Ø200-315mm X Ø40-63mm 20.3bar Cold Water Use Only 3030B.5.ØG - MecFlow Fusion End Cap Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3024B.5.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø160-315mm 20.3bar Cold Water Use 3080B.5.ØG - MecFlow Fusion Stub Flange Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3004B.5.ØXØXØ.90G MecFlow Fusion 90° Unequal Tee Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3004B.5.Ø.90G MecFlow Fusion 90° Equal Tee Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3001B.5.Ø.45G MecFlow Fusion Elbow 45° Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3001B.5.Ø.90G MecFlow Fusion Elbow 90° Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3011ES.ØG - MecFlow Fusion Coupler - Clickweld Socket / Electrofusion Spigot Fitting Ø50-160mm 20.3bar Cold Water Use Only 3011ES.ØG - MecFlow Fusion Socket Connector – Clickweld Socket / Electrofusion Socket Fitting Ø50-125mm 20.3bar Cold Water Use Only 3010ES.ØG - MecFlow Fusion Socket Connector – Clickweld Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use Only 3009EM.ØG MecFlow Fusion – Clickweld Transition Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use Only Models added January 2026: 3030B.5.ØG - MecFlow Fusion End Cap Socket Fitting (Butt Weld) Ø125-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3024B.5.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø200-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3080B.5.ØG - MecFlow Fusion Stub Flange - Socket Fitting (Butt Weld) Ø125-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3004B.5.ØXØXØ.90G - MecFlow Fusion 90° Unequal Tee - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3004B.5.Ø.90G - MecFlow Fusion 90° Equal Tee - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3001B.5.Ø.45G - MecFlow Fusion Elbow 45° - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3001B.5.Ø.90G - MecFlow Fusion Elbow 90° - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3011ES.ØG - MecFlow Fusion Coupler - Clickweld - Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use & 8.1bar 80°C 3010ES.ØG - MecFlow Fusion Socket Connector – Clickweld - Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use & 8.1bar 80°C 3009EM.ØG - MecFlow Fusion – Clickweld Transition - Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use & 8.1bar 80°C

Approval Holder:

Polypipe Building Services

Company Name

Polypipe Building Services

Address

New Hythe Business Park, College Road, Aylesford, Kent

Postcode

ME20 7PJ

View All Listings by this Company

Range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *‐KJ600304 and *-KJ600316 stainless steel pipes. The "KJ6278" prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

KONJOY, size, WRAS and material grade on fitting body. WRAS, KONJOY, size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: KJ625015005: 15×Rp½. KJ625018005: 18×Rp½. KJ625022075: 22×Rp¾. Adapter with female thread: KJ627115005: 15×Rp½. KJ627118005: 18×Rp½. KJ627122075: 22×Rp¾. KJ627128001: 28×Rp1. KJ627135125: 35×Rp1¼. KJ627142105: 42×Rp1½. KJ627154002: 54×Rp2. Bridge with plain ending: KJ608500018: 18. KJ608500022: 22. KJ608500028: 28. Cap: KJ621100015: 15. KJ621100018: 18. KJ621100022: 22. KJ621100028: 28. KJ621100035: 35. KJ621100042: 42. KJ621100054: 54. KJ621100076: 76.1. KJ621100089: 88.9. KJ621100108: 108. Elbow 45 with press ending: KJ604500015: 15. KJ604500018: 18. KJ604500015: 22. KJ604500028: 28. KJ604500035: 35. KJ604500042: 42. KJ604500054: 54. KJ604500076: 76.1. KJ604500089: 88.9. KJ604500108: 108. Elbow 45 with plain ending: KJ614500015: 15. KJ614500018: 18. KJ614500022: 22. KJ614500028: 28. KJ614500035: 35. KJ614500042: 4 KJ614500054: 54. KJ614500076: 76.1. KJ614500089: 88.9. KJ614500108 -108. Elbow 90 with press ending KJ609600015: 15. KJ609600018: 18. KJ609600022: 22. KJ609600028: 28. KJ609600035: 35. KJ609600042: 42. KJ609600054: 54. KJ609600067: 66.7. KJ609600076: 76.1. KJ609600089: 88.9. KJ609600108 -108. Elbow 90 with female thread: KJ623015005: 15×Rp½. KJ623018005: 18×Rp½. KJ623022075: 22×Rp¾. KJ623028001: 28×Rp1. KJ623035125 : 35×Rp1¼. KJ623042105: 42×Rp1½. KJ623054002: 54×Rp2. Elbow: 90 with: male thread: KJ624015005: 15×R½. KJ624018005: 18×R½. KJ624022075: 22×R¾ Elbow 90 with plain ending: KJ619100015: 15. KJ619100018: 18. KJ619100022: 22. KJ619100028: 28. KJ619100035: 35. KJ619100042: 42. KJ619100054: 54. KJ619100076: 76.1. KJ619100089: 88.9. KJ619100108: 108. Reducer coupling with plain ending: KJ624301815: 18×15. KJ624302218: 22×18. KJ624302818: 28×18. KJ624303522: 35×22. KJ624303528: 35×28. KJ624304222: 42×22. KJ624304228: 42×28. KJ624304235: 42×35. KJ624305428: 54×28. KJ624305435: 54×35. KJ624305442: 54×42. Reducer coupling with press ending: KJ624401815: 18×15. KJ624402215: 22×15. KJ624402218: 22×18. KJ624402815: 28×15. KJ624402818: 28×18. KJ624402822: 28×22. KJ624403515: 35×15. KJ624403518: 35×18. KJ624403522: 35×22. KJ624403528: 35×28. KJ624404215: 42×15. KJ624404218: 42×18. KJ624404222: 42×22. KJ624404228: 42×28. KJ624404235: 42×35. KJ624405415: 54×15. KJ624405418: 54×18. KJ624405422: 54×22. KJ624405428: 54×28. KJ624405435: 54×35. KJ624405442: 54×42. KJ624406735: 66.7×35. KJ624406754: 66.7×54. KJ624407654: 76.1×54. KJ624408954: 88.9×54. KJ624408976: 88.9×76.1. KJ624410854: 108×54. KJ624410876: 108×76.1. KJ624410889: 108×88.9. Reducer Tee with press ending: KJ613301815: 18×15×18. KJ613302215: 22×15×22. KJ613302218: 22×18×22. KJ613302815: 28×15×28. KJ613302818: 28×18×28. KJ613302822: 28×22×28. KJ613303522: 35×22×35. KJ613303528: 35×28×35. KJ613304222: 42×22×42. KJ613304228: 42×28×42. KJ613304235: 42×35×42. KJ613305422: 54×22×54. KJ613305428: 54×28×54. KJ613305435: 54×35×54. KJ613305442: 54×42×54. KJ613307642: 76.1×42×76.1. KJ613307654: 76.1×54×76.1. KJ613308954: 88.9×54×88.9 KJ613310854: 108×54×108. KJ613310876: 108×76.1×108. KJ613310889: 108×88.9×108 Equal coupling with press ending: KJ623700015: 15. KJ623700018: 18. KJ623700022: 22 KJ623700028: 28. KJ623700035: 35. KJ623700042: 42. KJ623700054: 54. KJ623700067: 66.7. KJ623700076: 76.1. KJ623700089: 88.9. KJ623700108: 108 Adapter with male thread: KJ627215005: 15×R½. KJ627218005: 18×R½. KJ627218075: 18×R¾. KJ627222005: 22×R½. KJ627222075: 22×R¾. KJ627228001: 28×R1. KJ627235125: 35×R1¼. KJ627242105: 42×R1½. KJ627254002: 54×R2. KJ627276205: 76.1×R2½. KJ627289003: 88.9×R3. Slip coupling with press ending: KJ627100015: 15. KJ627100018: 18. KJ627100022: 22. KJ627100028: 28. KJ627100035: 35. KJ627100042: 42 KJ627100054: 54. Tee with press ending: KJ613012015: 15. KJ613012018: 18. KJ613012022: 22. KJ613012028: 28. KJ613012035: 35. KJ613012042: 42. KJ613012054: 54. KJ613012076: 76.1. KJ613012089: 88.9. KJ613012108: 108. Tee with male thread: KJ613815005: 15×R½. KJ613818005: 18×R½. KJ613822005: 22×R½. KJ613822075: 22×R¾. KJ613828005: 28×R½. KJ613828075: 28×R¾. KJ613828001: 28×R1. KJ613835105: 35×R½. KJ613835125: 35×R1¼. KJ613842125: 42×R1¼. KJ613854105: 54×R1½. KJ613854002: 54×R2. Tee with female thread:: KJ613915005: 15×Rp½. KJ613918005: 18×Rp½. KJ613922005: 22×Rp½. KJ613922075: 22×Rp¾. KJ613928005: 28×R½. KJ613928075: 28×Rp¾. KJ613928001: 28×Rp1. KJ613935005: 35×Rp½. KJ613935125: 35×Rp1¼. KJ613942125: 42×Rp1¼. KJ613954105: 54×1½. KJ613954002: 54×Rp2. Adaptor with union nut: KJ627815005: 15×G½. KJ627818005: 18×G½. KJ627818075: 18×G¾. KJ627822005: 22×G½. KJ627822075: 22×G¾. KJ627822001: 22×G1. KJ627828001: 28×G1. KJ627835125: 35×G1¼. KJ627842175: 42×G1¾. KJ627854002: 54×G2. Stainless steel pipe (SS304 or SS316L): *‐KJ600304 (SS304) *-KJ600316 (SS316L) Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Approval Holder:

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Company Name

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Address

1st Floor, No. 222, Binhai Industrial Zone, 2nd Road, Xinghai Sub‐district, Longwan District, Wenzhou, Zhejiang

Country

China

Phone

0086‐577‐86896059

General Email

info@konjoy‐tech.com

View All Listings by this Company

‘Fastwarm’ range of U profile press fittings (nickel plated brass bodies) for use with ‘Fastwarm’ range of PERT/AL/PERT multi-layered pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

240704745

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 32mm

Marking:

Fastwarm on body Fastwarm, size, WRAS and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Equal Straight Union FW-KY101-S1616 S16X16 FW-KY101-S2020 S20X20 FW-KY101-S2525 S25X25 FW-KY101-S3232 S32X32 Unequal Straight Union FW-KY102-S2016 S20X16 FW-KY102-S2516 S25X16 FW-KY102-S2520 S25X20 FW-KY102-S3216 S32X16 FW-KY102-S3220 S32X20 FW-KY102-S3225 S32X25 Male Straight Union FW-KY103-S1612M S 16X1/2M FW-KY103-S1634M S 16X3/4M FW-KY103-S2012M S 20X1/2M FW-KY103-S2034M S 20X3/4M FW-KY103-S2512M S 25X1/2M FW-KY103-S2534M S 25X3/4M FW-KY103-S2511M S25X1M FW-KY103-S3234M S 32X3/4M FW-KY103-S3211M S 32X1M Female Straight Union FW-KY104-S1612F S 16X1/2 F FW-KY104-S1634F S 16X3/4 F FW-KY104-S2012F S 20X1/2 F FW-KY104-S2034F S 20X3/4 F FW-KY104-S2534F S 25X3/4 F FW-KY104-S2511F S 25X1 F FW-KY104-S3234F S 32X3/4 F FW-KY104-S3211F S 32X1 F Swivel Coupling FW-KY105-1612F 16X1/2F FW-KY105-2034F 20X3/4F FW-KY105-2012F 20X1/2F FW-KY105-2534F 25X3/4F Equal Elbow FW-KY106-L1616 L 16X16 FW-KY106-L2020 L 20X20 FW-KY106-L2525 L 25X25 FW-KY106-L3232 L 32X32 Female Elbow FW-KY107-L1612F L 16X1/2 F FW-KY107-L1634F L 16X3/4 F FW-KY107-L2012F L 20X1/2 F FW-KY107-L2034F L 20X3/4 F FW-KY107-L2534F L 25X3/4 F FW-KY107-L2511F L 25X1 F FW-KY107-L3211F L 32X1 F Male Elbow FW-KY108-L1612M L16x1/2M FW-KY108-L2012M L20x1/2M FW-KY108-L2034M L20X3/4M FW-KY108-L2534M L25x3/4M FW-KY108-L3211M L32x1M Swivel Elbow FW-KY109-1612F 16X1/2F FW-KY109-2034F 20X3/4F Equal Tee FW-KY110-T161616 T 16X16X16 FW-KY110-T202020 T 20X20X20 FW-KY110-T252525 T 25X25X25 FW-KY110-T323232 T 32X32X32 Unequal Tee FW-KY111-T162016 T 16X20X16 FW-KY111-T201616 T 20X16X16 FW-KY111-T201620 T20X16X20 FW-KY111-T202016 T20X20X16 FW-KY111-T251625 T 25X16X25 FW-KY111-T252516 T 25X25X16 FW-KY111-T251616 T25X16X16 FW-KY111-T252020 T 25X20X20 FW-KY111-T252025 T 25X20X25 FW-KY111-T321632 T32X16X32 FW-KY111-T322032 T32X20X32 FW-KY111-T322525 T32X25X25 FW-KY111-T322532 T32X25X32 Female Tee FW112-T2512F25 T25X1/2FX25 Elbow With Plate-Male FW-KY114-1612M 16X1/2M FW-KY114-1634M 16X3/4 M FW-KY114-2034M 20X3/4 M Elbow with Plate-Female FW-KY115-1612F 16X1/2 F FW-KY115-1634F 16X3/4F FW-KY115-2012F 20X1/2F FW-KY115-2034F 20X3/4F End cap FW-KY116-16 16 FW-KY116-20 20 FW-KY116-25 25 ‘ZL' range of PERT/AL/PERT multi-layer pipes. PERTPIPE50M 16*2.0 PERTPIPE60M 16*2.0 PERTPIPE70M 16*2.0 PERTPIPE 80M 16*2.0 PERTPIPE90M 16*2.0 PERTPIPE100M 16*2.0 PERTPIPE110M 16*2.0 PERTPIPE120M 16*2.0 PERTPIPE150M 16*2.0 PERTPIPE200M 16*2.0

Approval Holder:

Fastwarm Limited

Company Name

Fastwarm Limited

Address

Unit 13 Carnival Park Basildon Essex

Postcode

SS14 3WN

Phone

01228 744 479

General Email

support@fastwarm.com

View All Listings by this Company

Range of compression fittings with brass, nickel plated brass bodies for use with copper pipe (manufactured to EN 1057). For above ground use only. Max working pressure 16.0 bar. Max operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm. ¼” - 1¼” BSP (M) or (F). Added June 2025: Additional 8 - 35mm sizes (see model). 42mm - 54mm. 1½” - 2” BSP (M) or (F).

Marking:

MT(Brand name) , Size, WRAS and EN 1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Equal Straight: 6601012 - 12×12 6601015 - 15×15 6601018 - 18×18 6601022 - 22×22 6601028 - 28×28 6601035 - 35×35 6601042 - 42x42 6601054 - 54x54 6701008 8×8 6701010 - 10×10 6701012 - 12×12 6701014 - 14×14 6701015 - 15×15 6701016 - 16×16 6701018 - 18×18 6701022 - 22×22 6701028 - 28×28 6701035 - 35×35 6701042 - 42x42 6701054 - 54x54 Reducing Straight: 660101815 - 18×15 660102215 - 22×15 660102218 - 22×18 660102822 - 28×22 670101008 - 10×8 670101210 - 12×10 670101508 - 15×8 670101510- 15×10 670101512 - 15×12 670101815 - 18×15 670102215 - 22×15 670102822 - 28×22 Female Straight 660201215 - 12×1/2" F 660201510 - 15×3/8" F 660201515 - 15×1/2" F 660201520 - 15×3/4" F 660201525 - 15×1" F 660201815 - 18×1/2" F 660201820 - 18×3/4" F 660202215 - 22×1/2" F 660202220 - 22×3/4" F 660202215 - 22×1" F 660202820 - 28×3/4" F 660202825 - 28×1" F 670200810 - 8×3/8" F 670201010 - 10×3/8" F 670201015 - 10×1/2" F 670201210 - 12×3/8" F 670201215 - 12×1/2" F 670201415 - 14×1/2" F 670201510 - 15×3/8" F 670201515 - 15×1/2" F 670201520 - 15×3/4" F 670201525 - 15×1" F 670201615 - 16×1/2"F 670201620 - 16×3/4" F 670201815 - 18×1/2" F 670201820 - 18×3/4" F 670202215 - 22×1/2" F 670202220 - 22×3/4" F 670202225 - 22×1" F 670202820 - 28×3/4" F 670202825 - 28×1" F 670203532 - 35×1 1/4"F 670204240 - 42×1 1/2" F 670205450 - 54×2" F Male Straight: 670301510 - 15×3/8"M 670301515 - 15×1/2"M 670301520- 15×3/4"M 670301815 - 18×1/2"M 670301820 - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302225- 22×1"M 660302820 - 28×3/4"M 660302825 - 28×1"M 670300806F - 8×1/8"M 670301210F - 12×3/8"M 670301215F - 12×1/2"M 670301410F - 14×3/8"M 670301415F - 14×1/2"M 670301515 - 15×1/2"M 670301520F - 15×3/4"M 670301615F - 16×1/2"M 670301815F - 18×1/2"M 670301820F - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302820F - 28×3/4"M 670302825 - 28×1"M 670303532F - 35×1 1/4"M 670304240F - 42×1 1/2"M Equal Elbow: 6604015 - 15×15 6604018 - 18×18 6604022 - 22×22 6604028 - 28×28 6604035 - 35×35 6604042 - 42×1 1/2"M 6604054 - 54 x 54 6704008 - 8×8 6704010 - 10×10 6704012 - 12×12 6704014 - 14×14 6704015 - 15×15 6704016 - 16×16 6704018 - 18×18 6704022 - 22×22 6704028 - 28×28 6704035 - 35×35 6704042 - 42x42 6704054 - 54x54 Female Elbow: 670501215 - 12×1/2"F 670501515 - 15×1/2"F 670501520 - 15×3/4"F 670501815 - 18×1/2"F 670501820 - 18×3/4"F 670502215 - 22×1/2"F 670502220 - 22×3/4"F 670582225 - 22×1"F 670502825 - 28×1"F 660501515 - 15×1/2"F 660501520 - 15×3/4"F 660501815 - 18×1/2"F 660501820 - 18×3/4"F 660502215- 22×1/2"F 660502220 - 22×3/4"F 660502225 - 22×1"F 660502825 - 28×1"F Male Elbow: 660601515 - 15×1/2"M 660601520 - 15×3/4"M 660601815 - 18×1/2"M 660601820 - 18×3/4"M 660602215 - 22×1/2"M 660602220 - 22×3/4"M 660602225 - 22×1"M 660602825 - 28×1"M 670601215 - 12×1/2"M 670601415- 14×1/2"M 670601515 - 15×1/2"M 670601520 - 15×3/4"M 670601615 - 16×1/2"M 670601815 - 18×1/2"M 670601820 - 18×3/4"M 670602215 - 22×1/2"M 670602220 - 22×3/4"M 670602225 - 22×1"M 670602825 - 28×1"M Equal Tee: 6608015 - 15×15×15 6608018 - 18×18×18 6608022 - 22×22×22 6608028 - 28×28×28 6608035- 35×35×35 6608042 - 42×42×42 6608054 - 54×54×54 6708010 - 10×10×10 6708012 - 12×12×12 6708014 - 14×14×14 6708015 - 15×15×15 6708016 - 16×16×16 6708018 - 18×18×18 6708022 - 22×22×22 6708028 - 28×28×28 6708035 - 35×35×35 Reducing Tee: 66090152215 - 15×15×22 66090181518 - 18×18×15 66090181815 - 18×15×18 66090221515 - 22×15×15 66090222215- 22×15×22 66090221522 - 22×22×15 66090221822 - 22×22×18 66090282815 - 28×15×28 66090282222 - 28×22×22 66090282822 - 28×22×28 67090152215 -15×15×22 67090181518 - 18×18×15 67090181815 - 18×15×18 67090221515 - 22×15×15 67090222215 - 22×15×22 67090221522 - 22×22×15 67090282815 - 28×15×28 67090282222 - 28×22×22 67090282822 - 28×22×28 Female Tee: 66100151515 - 15×1/2“F 66100181518 - 18×1/2“F 66100182018 - 18×3/4“F 66100221522 - 22×1/2”F 66100222022 - 22×3/4”F 66100282028 - 28×3/4”F 66100282528- 28×1”F 67100151515- 15×1/2“F 67100181518 - 18×1/2“F 67100182018 - 18×3/4“F 67100221522 - 22×1/2”F 67100222022 - 22×3/4”F Wall Plate Elbow: 661101515 - 15×1/2"F 661101815 - 18×1/2"F 661101820 - 18×3/4"F 661102215 - 22×1/2"F 661102220 - 22×3/4"F 671101515 - 15×1/2"F 671102215 - 22×1/2"F 671102220 - 22×3/4"F Stop End: 6607015 - 15 6607018 - 18 6607022 - 22 670708 - 8 6707010 - 10 6707012 - 12 6707015 - 15 6707018 - 18 6707022 - 22 6707028 - 28 Bent Tap Connector: 671301515 - 15×1/2"F 671302220 - 22×3/4"F Crossover Bridge: 6612015 - 15×15 6612018 - 18×18 6612022 - 22×22 6712015 - 15×15 6712022 - 22×22 Where for all models: No suffix = brass body, NP suffix = nickel plated brass,

Approval Holder:

Business Key, S.L.

Company Name

Business Key, S.L.

Address

Poligono Industrial Camps d’En Ricart Carrer Comerç, 10 naves 4-9 08780 Pallejà (Barcelona)

Country

Spain

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207406

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

Aquaflow, PN & size on nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

324A02520Q TEE REDUCING Aquaflow 25X20X25 324A03225Q TEE REDUCING Aquaflow 32X25X32 324A04032Q TEE REDUCING Aquaflow 40X32X40 324A05025Q TEE REDUCING Aquaflow 50X25X50 324A05040Q TEE REDUCING Aquaflow 50X40X50 324A06325Q TEE REDUCING Aquaflow 63X25X63 324A06332Q TEE REDUCING Aquaflow 63X32X63 324A06340Q TEE REDUCING Aquaflow 63X40X63 324A06350Q TEE REDUCING Aquaflow 63X50X63 320002001Q ADAPTOR MALE Aquaflow 20X1/2" 320002002Q ADAPTOR MALE Aquaflow 20X3/4" 320002003Q ADAPTOR MALE Aquaflow 20X1" 320002501Q ADAPTOR MALE Aquaflow 25X1/2" 320002502Q ADAPTOR MALE Aquaflow 25X3/4" 320002503Q ADAPTOR MALE Aquaflow 25X1" 320003201Q ADAPTOR MALE Aquaflow 32X1/2" 320003202Q ADAPTOR MALE Aquaflow 32X3/4" 320003203Q ADAPTOR MALE Aquaflow 32X1" 320003204Q ADAPTOR MALE Aquaflow 32X11/4" 320003205Q ADAPTOR MALE Aquaflow 32X11/2" 320004003Q ADAPTOR MALE Aquaflow 40X1" 320004004Q ADAPTOR MALE Aquaflow 40X11/4" 320004005Q ADAPTOR MALE Aquaflow 40X11/2" 320004006Q ADAPTOR MALE Aquaflow 40X2" 320005003Q ADAPTOR MALE Aquaflow 50X1" 320005004Q ADAPTOR MALE Aquaflow 50X11/4" 320005005Q ADAPTOR MALE Aquaflow 50X11/2" 320005006Q ADAPTOR MALE Aquaflow 50X2" 320006305Q ADAPTOR MALE Aquaflow 63X11/2" 320006306Q ADAPTOR MALE Aquaflow 63X2" 320006307Q ADAPTOR MALE Aquaflow 63X21/2" 320A02001Q ADAPTOR FEMALE Aquaflow 20X1/2" 320A02002Q ADAPTOR FEMALE Aquaflow 20X3/4" 320A02010Q ADAPTOR FEMALE Aquaflow 20X3/8" 320A02501Q ADAPTOR FEMALE Aquaflow 25X1/2" 320A02502Q ADAPTOR FEMALE Aquaflow 25X3/4" 320A02503Q ADAPTOR FEMALE Aquaflow 25X1" 320A03201Q ADAPTOR FEMALE Aquaflow 32X1/2" 320A03202Q ADAPTOR FEMALE Aquaflow 32X3/4" 320A03203Q ADAPTOR FEMALE Aquaflow 32X1" 320A03204Q ADAPTOR FEMALE Aquaflow 32X11/4" 320A03205Q ADAPTOR FEMALE Aquaflow 32X11/2" 320A04003Q ADAPTOR FEMALE Aquaflow 40X1" 320A04004Q ADAPTOR FEMALE Aquaflow 40X11/4" 320A04005Q ADAPTOR FEMALE Aquaflow 40X11/2" 320A05004Q ADAPTOR FEMALE Aquaflow 50X11/4" 320A05005Q ADAPTOR FEMALE Aquaflow 50X11/2" 320A05006Q ADAPTOR FEMALE Aquaflow 50X2" 320A06305Q ADAPTOR FEMALE Aquaflow 63X11/2" 320A06306Q ADAPTOR FEMALE Aquaflow 63X2" 320A06307Q ADAPTOR FEMALE Aquaflow 63X21/2" 320B00020Q END PLUG Aquaflow 20MM 320B00025Q END PLUG Aquaflow 25MM 320B00032Q END PLUG Aquaflow 32MM 320B00040Q END PLUG Aquaflow 40MM 320B00050Q END PLUG Aquaflow 50MM 320B00063Q END PLUG Aquaflow 63MM 321020020Q COUPLING Aquaflow 20X20 321025025Q COUPLING Aquaflow 25X25 321032032Q COUPLING Aquaflow 32X32 321040040Q COUPLING Aquaflow 40X40 321050050Q COUPLING Aquaflow 50X50 321063063Q COUPLING Aquaflow 63X63 321A02520Q REDUCING COUPLING Aquaflow 25X20 321A03220Q REDUCING COUPLING Aquaflow 32X20 321A03225Q REDUCING COUPLING Aquaflow 32X25 321A04025Q REDUCING COUPLING Aquaflow 40X25 321A04032Q REDUCING COUPLING Aquaflow 40X32 321A05025Q REDUCING COUPLING Aquaflow 50X25 321A05032Q REDUCING COUPLING Aquaflow 50X32 321A05040Q REDUCING COUPLING Aquaflow 50X40 321A06325Q REDUCING COUPLING Aquaflow 63X25 321A06332Q REDUCING COUPLING Aquaflow 63X32 321A06340Q REDUCING COUPLING Aquaflow 63X40 321A06350Q REDUCING COUPLING Aquaflow 63X50 322020020Q ELBOW 90 Aquaflow 20X20 322025025Q ELBOW 90 Aquaflow 25X25 322032032Q ELBOW 90 Aquaflow 32X32 322040040Q ELBOW 90 Aquaflow 40X40 322050050Q ELBOW 90 Aquaflow 50X50 322063063Q ELBOW 90 Aquaflow 63X63 322A02001Q ELBOW THREADED MALE Aquaflow 20X1/2" 322A02002Q ELBOW THREADED MALE Aquaflow 20X3/4" 322A02501Q ELBOW THREADED MALE Aquaflow 25X1/2" 322A02502Q ELBOW THREADED MALE Aquaflow 25X3/4" 322A02503Q ELBOW THREADED MALE Aquaflow 25X1" 322A03202Q ELBOW THREADED MALE Aquaflow 32X3/4" 322A03203Q ELBOW THREADED MALE Aquaflow 32X1" 322A04004Q ELBOW THREADED MALE Aquaflow 40X11/4" 322A04005Q ELBOW THREADED MALE Aquaflow 40X11/2" 322A05005Q ELBOW THREADED MALE Aquaflow 50X11/2" 322A05006Q ELBOW THREADED MALE Aquaflow 50X2" 322A06306Q ELBOW THREADED MALE Aquaflow 63X2" 322A06307Q ELBOW THREADED MALE Aquaflow 63X21/2" 322B02001Q ELBOW THREADED FEMALE Aquaflow 20X1/2" 322B02002Q ELBOW THREADED FEMALE Aquaflow 20X3/4" 322B02501Q ELBOW THREADED FEMALE Aquaflow 25X1/2" 322B02502Q ELBOW THREADED FEMALE Aquaflow 25X3/4" 322B02503Q ELBOW THREADED FEMALE Aquaflow 25X1" 322B03201Q ELBOW THREADED FEMALE Aquaflow 32X1/2" 322B03202Q ELBOW THREADED FEMALE Aquaflow 32X3/4" 322B03203Q ELBOW THREADED FEMALE Aquaflow 32X1" 322B04004Q ELBOW THREADED FEMALE Aquaflow 40X11/4" 322B04005Q ELBOW THREADED FEMALE Aquaflow 40X11/2" 322B05005Q ELBOW THREADED FEMALE Aquaflow 50X11/2" 322B05006Q ELBOW THREADED FEMALE Aquaflow 50X2" 322B06306Q ELBOW THREADED FEMALE Aquaflow 63X2" 322B06307Q ELBOW THREADED FEMALE Aquaflow 63X21/2" 322C02501Q ELBOW POP-UP Aquaflow 25X25X1/2 322C03201Q ELBOW POP-UP Aquaflow 32X32X1/2 322C03202Q ELBOW POP-UP Aquaflow 32X32X3/4 322D02001Q WALL ELBOW F Aquaflow 20X1/2 COMPRESSION 322D02501Q WALL ELBOW F Aquaflow 25X1/2 COMPRESSION 322D02502Q WALL ELBOW F Aquaflow 25X3/4 COMPRESSION 323002001Q TEE THREADED FEMALE Aquaflow 20X1/2"X20 323002002Q TEE THREADED FEMALE Aquaflow 20X3/4"X20 323002501Q TEE THREADED FEMALE Aquaflow 25X1/2"X25 323002502Q TEE THREADED FEMALE Aquaflow 25X3/4"X25 323002503Q TEE THREADED FEMALE Aquaflow 25X1"X25 323003201Q TEE THREADED FEMALE Aquaflow 32X1/2"X32 323003202Q TEE THREADED FEMALE Aquaflow 32X3/4"X32 323003203Q TEE THREADED FEMALE Aquaflow 32X1"X32 323004004Q TEE THREADED FEMALE Aquaflow 40X11/4"X40 323004005Q TEE THREADED FEMALE Aquaflow 40X11/2"X40 323005005Q TEE THREADED FEMALE Aquaflow 50X11/2"X50 323005006Q TEE THREADED FEMALE Aquaflow 50X2"X50 323006306Q TEE THREADED FEMALE Aquaflow 63X2"X63 323006307Q TEE THREADED FEMALE Aquaflow 63X21/2"X63 323A02001Q TEE THREADED MALE Aquaflow 20X1/2"X20 323A02002Q TEE THREADED MALE Aquaflow 20X3/4"X20 323A02003Q TEE THREADED MALE Aquaflow 20X1"X20 323A02501Q TEE THREADED MALE Aquaflow 25X1/2"X25 323A02502Q TEE THREADED MALE Aquaflow 25X3/4"X25 323A02503Q TEE THREADED MALE Aquaflow 25X1"X25 323A03201Q TEE THREADED MALE Aquaflow 32X1/2"X32 323A03202Q TEE THREADED MALE Aquaflow 32X3/4"X32 323A03203Q TEE THREADED MALE Aquaflow 32X1"X32 323A04003Q TEE THREADED MALE Aquaflow 40X1"X40 323A04004Q TEE THREADED MALE Aquaflow 40X11/4"X40 323A04005Q TEE THREADED MALE Aquaflow 40X11/2"X40 323A05005Q TEE THREADED MALE Aquaflow 50X11/2"X50 323A05006Q TEE THREADED MALE Aquaflow 50X2"X50 323A06306Q TEE THREADED MALE Aquaflow 63X2"X63 323C03202Q CROSS TEE Aquaflow 32X3/4X3/4X32 324020020Q TEE 90° Aquaflow 20X20X20 324025025Q TEE 90° Aquaflow 25X25X25 324032032Q TEE 90° Aquaflow 32X32X32 324040040Q TEE 90° Aquaflow 40X40X40 324050050Q TEE 90° Aquaflow 50X50X50 324063063Q TEE 90° Aquaflow 63X63X63 324B02025Q TEE INCREASING Aquaflow 20Χ25Χ20MM 324B02532Q TEE INCREASING Aquaflow 25Χ32Χ25MM 320C05005Q FLANGED ADAPTOR Aquaflow 50X11/2 320C05006Q FLANGED ADAPTOR Aquaflow 50X2 320C06306Q FLANGED ADAPTOR Aquaflow 63X2 320C06307Q FLANGED ADAPTOR Aquaflow 63X21/2 320D05005Q FLANGED ADAPTOR Aquaflow 50X11/2 (4 B) 320D05006Q FLANGED ADAPTOR Aquaflow 50X2 (4 B) 320D06306Q FLANGED ADAPTOR Aquaflow 63X2 (4 B) 320D06307Q FLANGED ADAPTOR Aquaflow 63X21/2 (4 B) 321B00025Q REPAIR COUPLING Aquaflow 25X25 321B00032Q REPAIR COUPLING Aquaflow 32X32 321B00040Q REPAIR COUPLING Aquaflow 40X40 321B00050Q REPAIR COUPLING Aquaflow 50X50 321B00063Q REPAIR COUPLING Aquaflow 63X63 321C02522Q CONVERSION REDUCER Aquaflow 25X22 321C03222Q CONVERSION REDUCER Aquaflow 32X22 321C03228Q CONVERSION REDUCER Aquaflow 32X28 321D02725 GLOBAL TRANSITION COUPL. Aquaflow 20/27X25 321D02732 GLOBAL TRANSITION COUPL. Aquaflow 20/27X32 321D03425 GLOBAL TRANSITION COUPL. Aquaflow 27/34X25 321D03432 GLOBAL TRANSITION COUPL. Aquaflow 27/34X32 Models added September 2025 322B03203Q ELBOW THREADED FEMALE Aquaflow 32 X 1" 322B03204Q ELBOW THREADED FEMALE Aquaflow 32 Χ 1 1/4" 322B04003Q ELBOW THREADED FEMALE Aquaflow 40X1" 321D02720 GLOBAL TRANSITION COUPLING Aquaflow 19-27 / 20 323A03204Q TEE THREADED MALE Aquaflow 32X1 1/4"X32 323003204Q TEE THREADED FEMALE Aquaflow 32X1 1/4"X32 323004003Q TEE THREADED FEMALE Aquaflow 40X1"X40 Where XXX-YYY-ZZZ for product family codes with only 3 digits 320 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) suffix 'Q' Xxx(x)-yyy-zz for product family codes with a letter as a firth digit & suffix 'Q' 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter - suffix 'Q'

Approval Holder:

Kalsi Plastics (UK) Limited

Company Name

Kalsi Plastics (UK) Limited

Address

Kalsi House 5 Tomey Road Sparkhill Birmngham

Postcode

B11 2NJ

Country

United Kingdom

General Email

sales@kalsiplastics.co.uk

View All Listings by this Company

Stainless steel plate heat exchangers with copper brazing.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

0.75 to 2”.

Marking:

UK Exchangers and product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

UKE-BR030 UKE-BR040 UKE-BR060H UKE-BR050 UKE-BR050R UKE-BR095H BR200L UKE-BR200M UKE-BR205 UKE-BRX12B

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company

Range of ultrasonic dry type water meters with brass bodies. Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

BAYLAN, model number and other technical information on meter face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

ST-15. DN15 - thread size ¾” BSP (M). Lengths - 110mm, 115mm, 130mm, 145mm, 165mm, 170mm, 190mm. ST-20. DN20 - thread size 1” BSP (M). Lengths - 110mm, 115mm, 130mm, 135mm, 165mm, 175mm, 190mm, 200mm, 220mm. ST-25. DN25 - thread size 1 ¼” BSP (M). Lengths - 175mm, 199mm, 200mm, 210mm, 225mm. ST-32. DN32 - thread size 1 ½” BSP (M). Lengths - 110mm, 150mm, 175mm, 199mm, 200mm ST-40. DN40 - thread size 2” BSP (M). Lengths - 200mm, 220mm.

Approval Holder:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

Manufacturer:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

Resideo and product information on face of water meter. Resideo, POWOGAZ & technical info label on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: EW1100AC060 EW1100AC2000 EW1050AP2000 EW1100AC1100 EW1100AC1200 EW1100CM1200 EW1050AP1200 EW1100CM2000 Maximum operating temperature 85°C: EW1101AC0600 EW1101AC1100 EW1101AC1200 EW1101AC1400 EW1051AP1200 EW1100AC1400 EW1101CM1200 EW1101AC2000 EW1101CM2000 EW1051AP2000

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Wall outlet socket with brass body. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) x ¾” BSP (F)

Marking:

VOLA on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Vola 200M

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Range of threaded fittings with either brass or chrome plated brass bodies. Maximum working pressure 40 Bar Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Company logo SRi, model and Made in India on body

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

Brass Connector Nipple Socket BCNS15 1/2” x 15mm BCNS20 1/2” x 20mm BCNS50 1/2” x 50mm Brass Connector Nipple Socket with chrome finish BCNS15CP 1/2” x 15mm BCNS20CP 1/2” x 20mm BCNS50CP 1/2” x 50mm Brass Hex Nipple Socket BRHN12 1/2" BRHN100 1" BRHN200 2" Brass Hex Nipple Socket with chrome finish BRHN12CP 1/2" BRHN100CP 1" BRHN200CP 2"

Approval Holder:

SRI METAL CRAFT PRIVATE LIMITED

Company Name

SRI METAL CRAFT PRIVATE LIMITED

Address

Plot No. 3330, Phase III GIDC Dared Udyognagar, Kalavad Jamnagar Gujarat

Postcode

361004

General Email

jasmindhakaan@gmail.com

View All Listings by this Company

‘Hansen True Fit’ range of black coloured, plastic threaded fittings. Maximum working pressure 1/8” – 2” BSP: 16.0bar, 2½” BSP: 12.0bar, 3” – 4”: 10.0bar. Cold water and above ground use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/8” to 4” BSP.

Marking:

Hansen & size on body. Hansen & model on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

‘Hansen True Fit’ range: HSN06 / SHN06 6mm Hex Nipple HSN08 / SHN08 8mm Hex Nipple HSN10 / SHN10 10mm Hex Nipple HSN15 / SHN15 15mm Hex Nipple HSN20 / SHN20 20mm Hex Nipple HSN25 / SHN25 25mm Hex Nipple HSN32 / SHN32 32mm Hex Nipple HSN40 / SHN40 40mm Hex Nipple HSN50 / SHN50 50mm Hex Nipple HSN65 / SHN65 65mm Hex Nipple HSN80 / SHN80 80mm Hex Nipple HSN100 / SHN100 100mm Hex Nipple HSS15 / SS15 15mm Socket HSS20 / SS20 20mm Socket HSS25 / SS25 25mm Socket HSS32 / SS32 32mm Socket HSS40 / SS40 40mm Socket HSS50 / SS50 50mm Socket HSS65 / SS65 65mm Socket HSS80 / SS80 80mm Socket HSS100 / SS100 100mm Socket HRHN0806 / SRHN0806 8x6mm Red. Hex Nipple HRHN10050 / SRHN10050 100x50mm Red. Hex Nipple HRHN1006 / SRHN1006 10x6mm Red. Hex Nipple HRHN10065 / SRHN10065 100x65mm Red. Hex Nipple HRHN1008 / SRHN1008 10x8mm Red. Hex Nipple HRHN10080 / SRHN10080 100x80mm Red. Hex Nipple HRHN1506 / SRHN1506 15x6mm Red. Hex Nipple HRHN1508 / SRHN1508 15x8mm Red. Hex Nipple HRHN1510 / SRHN1510 15x10mm Red. Hex Nipple HRHN2010 / SRHN2010 20x10mm Red. Hex Nipple HRHN2015 / SRHN2015 20x15mm Red. Hex Nipple HRHN2515 / SRHN2515 25x15mm Red. Hex Nipple HRHN2520 / SRHN2520 25x20mm Red. Hex Nipple HRHN3220 / SRHN3220 32x20mm Red. Hex Nipple HRHN3225 / SRHN3225 32x25mm Red. Hex Nipple HRHN4020 / SRHN4020 40x20mm Red. Hex Nipple HRHN4025 / SRHN4025 40x25mm Red. Hex Nipple HRHN4032 / SRHN4032 40x32mm Red. Hex Nipple HRHN5020 / SRHN5020 50x20mm Red. Hex Nipple HRHN5025 / SRHN5025 50x25mm Red. Hex Nipple HRHN5032 / SRHN5032 50x32mm Red. Hex Nipple HRHN5040 / SRHN5040 50x40mm Red. Hex Nipple HRHN6532 / SRHN6532 65x32mm Red. Hex Nipple HRHN6540 / SRHN6540 65x40mm Red. Hex Nipple HRHN6550 / SRHN6550 65x50mm Red. Hex Nipple HRHN8040 / SRHN8040 80x40mm Red. Hex Nipple HRHN8050 / SRHN8050 80x50mm Red. Hex Nipple HRHN8065 / SRHN8065 80x65mm Red. Hex Nipple HSRS2015 / SRS2015 20x15mm Red. Socket HSRS2515 / SRS2515 25x15mm Red. Socket HSRS2520 / SRS2520 25x20mm Red. Socket HSRS3220 / SRS3220 32x20mm Red. Socket HSRS3225 / SRS3225 32x25mm Red. Socket HSRS4020 / SRS4020 40x20mm Red. Socket HSRS4025 / SRS4025 40x25mm Red. Socket HSRS4032 / SRS4032 40x32mm Red. Socket HSRS5020 / SRS5020 50x20mm Red. Socket HSRS5025 / SRS5025 50x25mm Red. Socket HSRS5032 / SRS5032 50x32mm Red. Socket HSRS5040 / SRS5040 50x40mm Red. Socket HSRS6540 / SRS6540 65x40mm Red. Socket HSRS6550 / SRS6550 65x50mm Red. Socket HSRS8050 / SRS8050 80x50mm Red. Socket HSRS8065 / SRS8065 80x65mm Red. Socket HSRS10065 / SRS10065 100x65mm Red. Socket HSRS10080 / SRS10080 100x80mm Red. Socket HTT15 / ST15 15mm Female Threaded Tee HTT20 / ST20 20mm Female Threaded Tee HTT25 / ST25 25mm Female Threaded Tee HTT32 / ST32 32mm Female Threaded Tee HTT40 / ST40 40mm Female Threaded Tee HTT50 / ST50 50mm Female Threaded Tee HTT65 / ST65 65mm Female Threaded Tee HTT80 / ST80 80mm Female Threaded Tee HTT100 / ST100 100mm Female Threaded Tee HRB10050 / SRB10050 100x50mm Red. Bushes HRB10065 / SRB10065 100x65mm Red. Bushes HRB10080 / SRB10080 100x80mm Red. Bushes HRB1506 / SRB1506 15x6mm Red. Bushes HRB1508 / SRB1508 15x8mm Red. Bushes HRB1510 / SRB1510 15x10mm Red. Bushes HRB2008 / SRB2008 20x8mm Red. Bushes HRB2010 / SRB2010 20x10mm Red. Bushes HRB2015 / SRB2015 20x15mm Red. Bushes HRB2508 / SRB2508 25x8mm Red. Bushes HRB2510 / SRB2510 25x10mm Red. Bushes HRB2515 / SRB2515 25x15mm Red. Bushes HRB2520 / SRB2520 25x20mm Red. Bushes HRB3215 / SRB3215 32x15mm Red. Bushes HRB3220 / SRB3220 32x20mm Red. Bushes HRB3225 / SRB3225 32x25mm Red. Bushes HRB4015 / SRB4015 40x15mm Red Bushes HRB4020 / SRB4020 40x20mm Red. Bushes HRB4025 / SRB4025 40x25mm Red. Bushes HRB4032 / SRB4032 40x32mm Red. Bushes HRB5015 / SRB5015 50x15mm Red. Bushes HRB5020 / SRB5020 50x20mm Red. Bushes HRB5025 / SRB5025 50x25mm Red. Bushes HRB5032 / SRB5032 50x32mm Red. Bushes HRB5040 / SRB5040 50x40mm Red. Bushes HRB6532 / SRB6532 65x32mm Red. Bushes HRB6540 / SRB6540 65x40mm Red. Bushes HRB6550 / SRB6550 65x50mm Red. Bushes HRB8040 / SRB8040 80x40mm Red. Bushes HRB8050 / SRB8050 80x50mm Red. Bushes HRB8065 / SRB8065 80x65mm Red. Bushes HTE100 / SE100 100mm Female Threaded Elbow HTE15 / SE15 15mm Female Threaded Elbow HTE20 / SE20 20mm Female Threaded Elbow HTE25 / SE25 25mm Female Threaded Elbow HTE32 / SE32 32mm Female Threaded Elbow HTE40 / SE40 40mm Female Threaded Elbow HTE50 / SE50 50mm Female Threaded Elbow HTE65 / SE65 65mm Female Threaded Elbow HTE80 / SE80 80mm Female Threaded Elbow HTMFE15 / SMFE15 15mm Male-Female Elbow HTMFE20 / SMFE20 20mm Male-Female Elbow HTMFE25 / SMFE25 25mm Male-Female Elbow HTMFE32 / SMFE32 32mm Male-Female Elbow HTMFE40 / SMFE40 40mm Male-Female Elbow HTMFE50 / SMFE50 50mm Male-Female Elbow HCP100 / SC100 100mm Cap HCP15 / SC15 15mm Cap HCP20 / SC20 20mm Cap HCP25 / SC25 25mm Cap HCP32 / SC32 32mm Cap HCP40 / SC40 40mm Cap HCP50 / SC50 50mm Cap HCP65 / SC65 65mm Cap HCP80 / SC80 80mm Cap HSP06 / SP06 6mm Plug HSP08 / SP08 8mm Plug HSP10 / SP10 10mm Plug HSP100 / SP100 100mm Plug HSP15 / SP15 15mm Plug HSP20 / SP20 20mm Plug HSP25 / SP25 25mm Plug HSP32 / SP32 32mm Plug HSP40 / SP40 40mm Plug HSP50 / SP50 50mm Plug HSP65 / SP65 65mm Plug HSP80 / SP80 80mm Plug SMFA1520 / HMFA1520 15x20mm Male Female Adaptor PODTE50 / HTE50 50mm Tow Eye HBU15 / SBU15 15mm Barrel Union HBU20 / SBU20 20mm Barrel Union HBU25 / SBU25 25mm Barrel Union HBU2520 / SBU2520 25x20mm Barrel Union HBU32 / SBU32 32mm Barrel Union HBU3225 / SBU3225 32x25mm Barrel Union HBU40 / SBU40 40mm Barrel Union HBU50 / SBU50 50mm Barrel Union

Approval Holder:

Hansen Products (NZ) Limited

Company Name

Hansen Products (NZ) Limited

Address

16 Union East Street Whangarei 0110 New Zealand

View All Listings by this Company

Range of in-line flow sensors incorporating either brass (type 230, 235 & 236) or plastic (type 200 & 210) bodies & EPDM ‘O’-rings. Maximum working pressure 12.0 Bar Maximum operating temperature 100.0°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251102718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Type 200 range is for use with copper pipe (manufactured to EN 1057)

Size:

Type 200 Range – Clip connection: DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 210 Range – BSP (M) DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 230 Range – BSP (M) DN10 = ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 235 and Type 236 Ranges – BSP (M) DN8 = ½” or ¾”, DN10 = ½” or ¾” or 1”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼”, DN25 = 1.¼” or 1.½” and DN32 = 1.½”

Marking:

Type 200 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 210 - Huba Control, model number, DN, flow arrow and other technical information on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 230 - Huba Control, DN and flow arrow on body. Huba Control and other technical information on adhesive label on sensor cap. Type 235 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 236 - Huba control, Model number and other technical information on adhesive label on body. DN and Flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Type 200 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 210 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 230 – DN10, DN15, DN20 & DN25. Type 235 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 236 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 201 – Flow Sensor Head, Type 211 – Flow Sensor Head.

Approval Holder:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250902720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN25 - DN200 flanged.

Marking:

Dooch, model, serial number and technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Proviso:

The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Model:

XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Approval Holder:

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Address

No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company

Manufacturer:

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Address

NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

CM(E) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Maximum operating parameters: Cast iron models: Maximum working pressure 6.0 bar @ 90°C. Maximum working pressure 10.0 bar @ 40°C. Stainless steel models (not self-priming variants): Maximum working pressure 10.0 bar @ 99°C. Maximum working pressure 16.0 bar @ 90°C. Stainless steel self-priming models (CM(E) 1, 3 & 5 (AISI 304) only): Maximum working pressure 10.0 or 16.0 bar @ 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251007701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” - 2” BSP (F) or NPT (F) inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model, manufacturing country and technical information on adhesive labels either on the terminal box or fan cover. Grundfos and Grundfos logo on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

31/10/2030

Model:

CM(E)1, CM(E)3 and CM(E)5: CM(E)1, cast iron / AISI304 2 – 8 stages. CM(E)3, cast iron / AISI304 2 – 8 stages. CM(E)5, cast iron / AISI304 2 – 8 stages. CM(E)1, AISI316 2 - 14 stages. CM(E)3, AISI316 2 - 14 stages. CM(E)5, AISI316 2 - 13 stages. CM(E)10 CM(E)15 and CM(E)25: CM(E)10, cast iron / AISI304 1 – 5 stages. CM(E)15, cast iron / AISI304 1 – 4 stages. CM(E)25, cast iron / AISI304 1 – 4 stages. CM(E)10, AISI316 1 – 8 stages. CM(E)15, AISI316 1 – 4 stages. CM(E)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI304 3 – 6 stages (S or O) CM(E)3, AISI304 3 – 6 stages (S or O) CM(E)5, AISI304 3 – 7 stages (S or O) Model key: CM/CME X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). S: Self-priming version (maximum suction lift 4 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal NPT thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage (electrical characteristics - not relevant for the WRAS approval): A/B/B1/B2/C1/E/E1/F/G/H/J/O/S/T/U/V/X. X12 = Motor information(electrical characteristics - not relevant for the WRAS approval): A/B/C/D/EF/G/H/I/J. X13 = Mains plug (electrical characteristics - not relevant for the WRAS approval): A/B/C/D. X14 = Sensor (electrical characteristics - not relevant for the WRAS approval): N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C1-A-A-N

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Undefinable Air Gap – See IRN’s

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Notes & Further Information

Two Fixed Head's with different finish and size as below FH SLRD01 C / BB / GM - (Dia 200mm) FH SLRD02 C - (Dia 250mm) FH SLRD03 C - (Dia 300mm) 225788 - (Wickes selling code for FH SLRD03 C) RP3 FH SLRD01 C - (Dia 200mm, chrome 3) FH TDRD01 C - (Dia 157mm) FH TDRD01 C / G - (Dia 200mm) FH TDRD03 C - (Dia 300mm)

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company