Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260202303

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless Steel and Polyamide braided, PE lined inlet hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Spout Outlet	Wastes
71 554 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator	Pop Up
71 564 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator	Pop Up
71 870 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator
71 871 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator
71 857 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator
71 878 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:: Xiamen Lota International Co., Ltd.

WRAS Approval Number: #251115311

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless-steel or nylon braided with PEX lined Inlet hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
SL-KT053	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	1/4 Turn ceramic disc	C-plate	Aerator
SL-KT014	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	1/4 Turn ceramic disc	C-plate	Aerator
SL-KT015	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	1/4 Turn ceramic disc	C-plate	Aerator
SL-KT004	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	Non-rising spindle	C-plate	Aerator
SL-KT40602R	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	1/4 Turn ceramic disc	C-plate	Aerator
SL-KT032	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Side of body	No	Ceramic cartridge	C-plate	Aerator
SL-KT054	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	1/4 Turn ceramic disc	C-plate	Aerator
SL-KT30602W	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	1/4 Turn ceramic disc	C-plate	Aerator
SL-KT40202L	Various	1/2" BSP (F)	10 bar	60 °C	Company Logo	Rear of body	No	1/4 Turn ceramic disc	C-plate	Flow Straightener

Notes & Further Information: Various finish: (1)Without suffix to current model number:Chrome plated (2)With suffix B:Black (3)With suffix BB:Brushed brass

Approval Holder:: Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name
Taizhou Shenglang Sanitary Ware Co., Ltd.
Address
Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturers:: Taizhou Shenglang Sanitary Ware Co, Ltd.

WRAS Approval Number: #260188305

Section:: 0470 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Capable of Achieving AUK3 Tap Gap Stainless Steel and Polyamide braided, PEX lined inlet hoses
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
519413 - MILI RH HP CHR	Chrome	3/8”	5 bar	60 °C	BLANCO	Body	Yes	Ceramic cartridge	Not Applicable	Aerator
517742 - MIDA RH HP CHR	Chrome	3/8"	5 bar	60 °C	BLANCO	Body	Yes	Ceramic cartridge	Not Applicable	Aerator
528156 - MIDA ECO RH HP BL	Black matt	3/8”	5 bar	60 °C	BLANCO	Body	Yes	Ceramic cartridge	Not Applicable	Aerator	Flow Regulator Fitted,
519414 - MILA RH HP CHR	Chrome	3/8”	5 bar	60 °C	BLANCO	Body	Yes	Ceramic cartridge	Not Applicable	Aerator
526657 - MILA RH HP BL	Black matt	3/8”	5 bar	60 °C	BLANCO	Body	Yes	Ceramic cartridge	Not Applicable	Aerator
528154 - MILA ECO EH HP CHR	Chrome	3/8”	5 bar	60 °C	BLANCO	Body	Yes	Ceramic cartridge	Not Applicable	Aerator	Flow Regulator Fitted,
528155 - MILA ECO EH HP BL	Black	3/8”	5 bar	60 °C	BLANCO	Body	Yes	Ceramic cartridge	Not Applicable	Aerator	Flow Regulator Fitted,

Approval Holder:: BLANCO GmbH + Co KG

Company Name
BLANCO GmbH + Co KG
Address
Flehinger Strasse 59 Oberderdingen
Postcode
75038
Country
Germany
General Email
certification-water@blanco.de

View All Listings by this Company

WRAS Approval Number: #251115303

Section:: 0510 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Stainless steel braided PEX lined connection hose Stainless steel braided PEX lined inlet hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R007 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
SJS-WB100* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,
SJS-WB200* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,
SJS-WB101* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,
JD-WB743* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Spout	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,

Notes & Further Information: The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251115309

Section:: 0510 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout.
Wall Mounted.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
SJS-WB102* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
SJS-WB202* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB742* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB793* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB793-1* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB703-1* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Body	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB703-2* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Body	No	Ceramic cartridge	Not Applicable	Aerator
JD-WB703* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Body	No	Ceramic cartridge	Not Applicable	Aerator

Notes & Further Information: The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251115306

Section:: 0570 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a double outlet and a swivel spout.
Deck Mounted. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
2720065	Chromed	BSP 1/2" (M)	10 bar	85 °C	MVI	Rear of body	No	Non-rising spindle	Metal Backnuts	Flow Straightener
2720095	Chromed	BSP 1/2" (M)	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	Metal Backnuts	Flow Straightener

Approval Holder:: MVI Hazel Ltd.

Company Name
MVI Hazel Ltd.
Address
1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

WRAS Approval Number: #250908301

Section:: 0650 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Stainless-steel braided EPDM lined flexible connection hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 30/09/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Fixing Type	Spout Outlet	Wastes	Includes
HGLS20	Various	15mm	6 bar	65 °C	Logo	on spout	No	Plastic Backnuts	Aerator	Click Type	Flow Regulator Fitted, Interconnecting Hoses,
HGLS38	Various	15mm	6 bar	65 °C	Logo	on spout	No	Plastic Backnuts	Aerator	Click Type	Flow Regulator Fitted, Interconnecting Hoses,
HGLS30	Various	15mm	6 bar	65 °C	Logo	on spout	No	Plastic Backnuts	Aerator	Click Type	Flow Regulator Fitted, Interconnecting Hoses,
FLLS20	Various	15mm	6 bar	65 °C	Logo	on spout	No	Plastic Backnuts	Aerator	Click Type	Flow Regulator Fitted, Interconnecting Hoses,
FLLS30	Various	15mm	6 bar	65 °C	Logo	on spout	No	Plastic Backnuts	Aerator	Click Type	Flow Regulator Fitted, Interconnecting Hoses,

Approval Holder:: Waterworks Ltd

Company Name
Waterworks Ltd
Address
60 Backus Ave. Danbury
Postcode
CT06810
Country
United States
Phone
2035466207
General Email
mary.kimlinger@waterworks.com

View All Listings by this Company

WRAS Approval Number: #251008301

Section:: 0650 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a fixed spout.
Wall Mounted Undefinable Air Gap - See IRN's Product requires a manifold which is not supplied as part of this approval.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/10/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
20.189.002	Various	G 1/2"	10 bar	65 °C	Grohe	Spout	No	1/4 Turn ceramic disk	Not Applicable	Aerator
20.193.002	Various	G 1/2"	10 bar	65 °C	Grohe	Spout	No	1/4 Turn ceramic disk	Not Applicable	Aerator

Notes & Further Information: Where xxx denotes finish, can be replaced by: 002 – Chrome DC2 – Supersteel DA2 – Warm sunset AL2 – Brushed hard graphite A02 – hard graphit DL2 – brushed warm sunset GN2 – brushed cool sunrise A02 – hard graphite MS2 – satin steel GL2 – cool sunrise MS2 – satin graphite

Approval Holder:: Grohe AG

Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturers:: Grohe AG

WRAS Approval Number: #260202008

Section:: 0650 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a fixed spout.
Wall mounted concealed Undefinable Air Gap – See IRN’s Products need to be installed in combination with 10303180 Basic set for 3-hole basin mixer for concealed installation wall-mounted (Not part of this approval).
Installation Requirements:: R001 R040
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
36 107 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	basic set 10303180	10 bar	60 °C	AXOR	on the spout	Yes	Not applicable		Aerator
36 115 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	basic set 10303180	10 bar	60 °C	AXOR	on the spout	Yes	Not applicable		Aerator

Notes & Further Information: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:: Hansgrohe SE

WRAS Approval Number: #251002034

Range of Socket weld, Click weld, Butt weld and Electro fusion fittings (see models), for use with ABN//INSTAL CT Faser RD Series 3.2 / SDR 7.4 & ABN//INSTAL CT Faser RD Series 5 / SDR 11 pipe. Maximum working pressure; (see models) Maximum operating temperature; (see models)

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251002034
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Polypipe, ABN and size on fitting body. Polypipe, ABN, size, material, series, date of manufacture (DD/MM/YYYY), and DIN8078-2008-09 on the pipe.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 3000.3.Ø.40G - MecFlow Fusion Pipe Plain End Pipe – Series 3, 4m Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C 3000.5.Ø.40G - MecFlow Fusion Pipe Plain End Pipe – Series 5, 4m Ø40-110mm 20.3bar Cold Water Use 8.1bar @ 80°C 3000.5.Ø.58G - MecFlow Fusion Pipe Plain End Pipe – Series 5, 5.8m Ø125-200mm 20.3bar Cold Water Use 8.1bar @ 80°C Ø200-315mm 20.3bar Cold Water Use Only 3011S.ØG - MecFlow Fusion Double Socket Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3004S.Ø.90G - MecFlow Fusion Equal Tee 90° Triple Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3004S.ØXØXØ.90G - MecFlow Fusion Unequal Tee 90° Triple Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm 20.3bar Cold Water Use 8.1bar @ 80°C 3001S.Ø.90G - MecFlow Fusion Elbow 90° Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3001S.Ø.45G - MecFlow Fusion Elbow 45° Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3024S.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3030S.ØG - MecFlow Fusion End Cap Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3080S.ØG - MecFlow Fusion Stub Flange Socket Fitting Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3016S.32X075.90G - MecFlow Fusion Threaded Adaptor – 90° Female Socket / BSP Thread Fitting Ø32mm x ¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.32X190G - MecFlow Fusion Threaded Adaptor – 90° Female Hexagon Socket / BSP Thread Fitting Ø32mm x 1” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.32X075.90G - MecFlow Fusion Threaded Adaptor – 90° Male Socket / BSP Thread Fitting Ø32mm x ¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.32X1.90G - MecFlow Fusion Threaded Adaptor – 90° Male Hexagon Socket / BSP Thread Fitting Ø32mm x 1” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.ØXØG - MecFlow Fusion Threaded Adaptor – Female Socket / BSP Thread Fitting Ø20-32mm x ½-¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.ØXØG - MecFlow Fusion Threaded Adaptor – Female Hexagon Socket / BSP Thread Fitting Ø32mm x 1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼-4” 20.3barCold Water Use 8.1bar @ 80°C 3017S.ØXØG - MecFlow Fusion Threaded Adaptor –Male Socket / BSP Thread Fitting Ø20-32mm x ½-¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.ØXØG - MecFlow Fusion Threaded Adaptor – Male Hexagon Socket / BSP Thread Fitting Ø32mm x 1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3019S.32XØG - MecFlow Fusion Threaded Adaptor – Female Socket / BSP Thread Fitting Ø32mm x 1-1¼” 31.7bar Cold Water Use 8.1bar @ 80°C 3057S.ØXØG - MecFlow Fusion Threaded Adaptor Male Socket / BSP Thread Fitting Ø20-32mm x ½”-1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼”-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3058S.ØXØG - MecFlow Fusion Threaded Adaptor Female Socket / BSP Thread Fitting Ø20-32mm x ½”-1” 31.7bar Cold Water Use 8.1bar @80°C Ø40-110mm x 1¼”-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3010.ØG - MecFlow Fusion Electrofusion Coupler Double Electrofusion Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C Ø160mm 20.3bar Cold Water Use Only 3054.ØXØG - MecFlow Fusion Saddle Male Saddle / Socket Fitting Ø50-200mm X Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø90-200mm X Ø40-63mm 8.1bar @ 80°C Ø200-315mm X Ø40-63mm 20.3bar Cold Water Use Only 3030B.5.ØG - MecFlow Fusion End Cap Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3024B.5.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø160-315mm 20.3bar Cold Water Use 3080B.5.ØG - MecFlow Fusion Stub Flange Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3004B.5.ØXØXØ.90G MecFlow Fusion 90° Unequal Tee Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3004B.5.Ø.90G MecFlow Fusion 90° Equal Tee Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3001B.5.Ø.45G MecFlow Fusion Elbow 45° Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3001B.5.Ø.90G MecFlow Fusion Elbow 90° Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3011ES.ØG - MecFlow Fusion Coupler - Clickweld Socket / Electrofusion Spigot Fitting Ø50-160mm 20.3bar Cold Water Use Only 3011ES.ØG - MecFlow Fusion Socket Connector – Clickweld Socket / Electrofusion Socket Fitting Ø50-125mm 20.3bar Cold Water Use Only 3010ES.ØG - MecFlow Fusion Socket Connector – Clickweld Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use Only 3009EM.ØG MecFlow Fusion – Clickweld Transition Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use Only Models added January 2026: 3030B.5.ØG - MecFlow Fusion End Cap Socket Fitting (Butt Weld) Ø125-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3024B.5.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø200-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3080B.5.ØG - MecFlow Fusion Stub Flange - Socket Fitting (Butt Weld) Ø125-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3004B.5.ØXØXØ.90G - MecFlow Fusion 90° Unequal Tee - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3004B.5.Ø.90G - MecFlow Fusion 90° Equal Tee - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3001B.5.Ø.45G - MecFlow Fusion Elbow 45° - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3001B.5.Ø.90G - MecFlow Fusion Elbow 90° - Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use Ø125-160mm 8.1bar 80°C 3011ES.ØG - MecFlow Fusion Coupler - Clickweld - Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use & 8.1bar 80°C 3010ES.ØG - MecFlow Fusion Socket Connector – Clickweld - Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use & 8.1bar 80°C 3009EM.ØG - MecFlow Fusion – Clickweld Transition - Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use & 8.1bar 80°C

Approval Holder:: Polypipe Building Services

Company Name
Polypipe Building Services
Address
New Hythe Business Park, College Road, Aylesford, Kent
Postcode
ME20 7PJ

View All Listings by this Company

WRAS Approval Number: #250615017

Range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *‐KJ600304 and *-KJ600316 stainless steel pipes. The "KJ6278" prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).
Marking:: KONJOY, size, WRAS and material grade on fitting body. WRAS, KONJOY, size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Adapter 90 with female thread: KJ625015005: 15×Rp½. KJ625018005: 18×Rp½. KJ625022075: 22×Rp¾. Adapter with female thread: KJ627115005: 15×Rp½. KJ627118005: 18×Rp½. KJ627122075: 22×Rp¾. KJ627128001: 28×Rp1. KJ627135125: 35×Rp1¼. KJ627142105: 42×Rp1½. KJ627154002: 54×Rp2. Bridge with plain ending: KJ608500018: 18. KJ608500022: 22. KJ608500028: 28. Cap: KJ621100015: 15. KJ621100018: 18. KJ621100022: 22. KJ621100028: 28. KJ621100035: 35. KJ621100042: 42. KJ621100054: 54. KJ621100076: 76.1. KJ621100089: 88.9. KJ621100108: 108. Elbow 45 with press ending: KJ604500015: 15. KJ604500018: 18. KJ604500015: 22. KJ604500028: 28. KJ604500035: 35. KJ604500042: 42. KJ604500054: 54. KJ604500076: 76.1. KJ604500089: 88.9. KJ604500108: 108. Elbow 45 with plain ending: KJ614500015: 15. KJ614500018: 18. KJ614500022: 22. KJ614500028: 28. KJ614500035: 35. KJ614500042: 4 KJ614500054: 54. KJ614500076: 76.1. KJ614500089: 88.9. KJ614500108 -108. Elbow 90 with press ending KJ609600015: 15. KJ609600018: 18. KJ609600022: 22. KJ609600028: 28. KJ609600035: 35. KJ609600042: 42. KJ609600054: 54. KJ609600067: 66.7. KJ609600076: 76.1. KJ609600089: 88.9. KJ609600108 -108. Elbow 90 with female thread: KJ623015005: 15×Rp½. KJ623018005: 18×Rp½. KJ623022075: 22×Rp¾. KJ623028001: 28×Rp1. KJ623035125 : 35×Rp1¼. KJ623042105: 42×Rp1½. KJ623054002: 54×Rp2. Elbow: 90 with: male thread: KJ624015005: 15×R½. KJ624018005: 18×R½. KJ624022075: 22×R¾ Elbow 90 with plain ending: KJ619100015: 15. KJ619100018: 18. KJ619100022: 22. KJ619100028: 28. KJ619100035: 35. KJ619100042: 42. KJ619100054: 54. KJ619100076: 76.1. KJ619100089: 88.9. KJ619100108: 108. Reducer coupling with plain ending: KJ624301815: 18×15. KJ624302218: 22×18. KJ624302818: 28×18. KJ624303522: 35×22. KJ624303528: 35×28. KJ624304222: 42×22. KJ624304228: 42×28. KJ624304235: 42×35. KJ624305428: 54×28. KJ624305435: 54×35. KJ624305442: 54×42. Reducer coupling with press ending: KJ624401815: 18×15. KJ624402215: 22×15. KJ624402218: 22×18. KJ624402815: 28×15. KJ624402818: 28×18. KJ624402822: 28×22. KJ624403515: 35×15. KJ624403518: 35×18. KJ624403522: 35×22. KJ624403528: 35×28. KJ624404215: 42×15. KJ624404218: 42×18. KJ624404222: 42×22. KJ624404228: 42×28. KJ624404235: 42×35. KJ624405415: 54×15. KJ624405418: 54×18. KJ624405422: 54×22. KJ624405428: 54×28. KJ624405435: 54×35. KJ624405442: 54×42. KJ624406735: 66.7×35. KJ624406754: 66.7×54. KJ624407654: 76.1×54. KJ624408954: 88.9×54. KJ624408976: 88.9×76.1. KJ624410854: 108×54. KJ624410876: 108×76.1. KJ624410889: 108×88.9. Reducer Tee with press ending: KJ613301815: 18×15×18. KJ613302215: 22×15×22. KJ613302218: 22×18×22. KJ613302815: 28×15×28. KJ613302818: 28×18×28. KJ613302822: 28×22×28. KJ613303522: 35×22×35. KJ613303528: 35×28×35. KJ613304222: 42×22×42. KJ613304228: 42×28×42. KJ613304235: 42×35×42. KJ613305422: 54×22×54. KJ613305428: 54×28×54. KJ613305435: 54×35×54. KJ613305442: 54×42×54. KJ613307642: 76.1×42×76.1. KJ613307654: 76.1×54×76.1. KJ613308954: 88.9×54×88.9 KJ613310854: 108×54×108. KJ613310876: 108×76.1×108. KJ613310889: 108×88.9×108 Equal coupling with press ending: KJ623700015: 15. KJ623700018: 18. KJ623700022: 22 KJ623700028: 28. KJ623700035: 35. KJ623700042: 42. KJ623700054: 54. KJ623700067: 66.7. KJ623700076: 76.1. KJ623700089: 88.9. KJ623700108: 108 Adapter with male thread: KJ627215005: 15×R½. KJ627218005: 18×R½. KJ627218075: 18×R¾. KJ627222005: 22×R½. KJ627222075: 22×R¾. KJ627228001: 28×R1. KJ627235125: 35×R1¼. KJ627242105: 42×R1½. KJ627254002: 54×R2. KJ627276205: 76.1×R2½. KJ627289003: 88.9×R3. Slip coupling with press ending: KJ627100015: 15. KJ627100018: 18. KJ627100022: 22. KJ627100028: 28. KJ627100035: 35. KJ627100042: 42 KJ627100054: 54. Tee with press ending: KJ613012015: 15. KJ613012018: 18. KJ613012022: 22. KJ613012028: 28. KJ613012035: 35. KJ613012042: 42. KJ613012054: 54. KJ613012076: 76.1. KJ613012089: 88.9. KJ613012108: 108. Tee with male thread: KJ613815005: 15×R½. KJ613818005: 18×R½. KJ613822005: 22×R½. KJ613822075: 22×R¾. KJ613828005: 28×R½. KJ613828075: 28×R¾. KJ613828001: 28×R1. KJ613835105: 35×R½. KJ613835125: 35×R1¼. KJ613842125: 42×R1¼. KJ613854105: 54×R1½. KJ613854002: 54×R2. Tee with female thread:: KJ613915005: 15×Rp½. KJ613918005: 18×Rp½. KJ613922005: 22×Rp½. KJ613922075: 22×Rp¾. KJ613928005: 28×R½. KJ613928075: 28×Rp¾. KJ613928001: 28×Rp1. KJ613935005: 35×Rp½. KJ613935125: 35×Rp1¼. KJ613942125: 42×Rp1¼. KJ613954105: 54×1½. KJ613954002: 54×Rp2. Adaptor with union nut: KJ627815005: 15×G½. KJ627818005: 18×G½. KJ627818075: 18×G¾. KJ627822005: 22×G½. KJ627822075: 22×G¾. KJ627822001: 22×G1. KJ627828001: 28×G1. KJ627835125: 35×G1¼. KJ627842175: 42×G1¾. KJ627854002: 54×G2. Stainless steel pipe (SS304 or SS316L): *‐KJ600304 (SS304) *-KJ600316 (SS316L) Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Approval Holder:: Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Company Name
Wenzhou Konjoy Fluid Control Tech Co., Ltd.
Address
1st Floor, No. 222, Binhai Industrial Zone, 2nd Road, Xinghai Sub‐district, Longwan District, Wenzhou, Zhejiang
Country
China
Phone
0086‐577‐86896059
General Email
info@konjoy‐tech.com

View All Listings by this Company

WRAS Approval Number: #251202006

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Numepress' stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251202006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.
Marking:: ISOTUBI SL LOGO, Numepress and size on fitting body. ISOTUBI, Numepress, size and product info on pipe.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: F01 Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F02 Slip Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F03 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F04 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F05 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F06 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F07 Female Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F08 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F09 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 F10 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 F12 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 F14 Reducer from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F15 Reducing tee from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F16 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F17 Female adaptor from 15 3/ 8" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 F18 M ale adaptor from 15 3/8" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F19 Flanges adaptor from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F20 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F21 Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F22 Air tuve Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F23 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F24 3 Pieces adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F25 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F26 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F27 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 Material 1.4401/1.4404 & 1.4301/1.4307 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 F37 Male threaded cross from 15 1/2" to 108-4" Material 1.4401/1.4404 & 1.4301/1.4307 F38 Female threaded cross from 15 1/ 2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F39 90Q Male angle adaptor from 15 3/8" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F42 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F43 Grooved Transition from 3/4" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F44 Van Stone flange from 1/2" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F45 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 F46 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F47 Half coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F48 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F49 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F50 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F51 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F53 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F54 Male plug from 16 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F55 Weld Adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F56 75Q Female -Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F57 l0Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F58 60Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F59 lSQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 Material 1.4401/1.4404 & 1.4301/1.4307 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 Material 1.4401/1.4404 & 1.4301/1.4307 F63 7SQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F64 15Q Male -female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F65 Male-Female pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F66 30Q Male-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F72 45Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm, Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:: ISOTUBI SL

Company Name
ISOTUBI SL
Address
Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN
Country
Spain
General Email
xavi.armengou@isotubi.com

View All Listings by this Company
Manufacturer:: ISOTUBI SL

Company Name
ISOTUBI SL
Address
Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN
Country
Spain
General Email
xavi.armengou@isotubi.com

View All Listings by this Company

WRAS Approval Number: #251004016

Range of ‘PPS/GF BFS (black)’ shrink back fittings for use with ‘Uponor Combi pipe’ (PEX/EVOH/PEX). Maximum operating pressures 12 bar & 6 bar, with maximum operating temperatures 20°C & 95°C respectively.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251004016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: U or UPONOR on fittngs. Uponor and product info on pipe.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 1144509 ELBOW PPS 16-16 ELBOW, 1144510 ELBOW PPS 20-20 ELBOW, 1144511 ELBOW PPS 25-25 ELBOW, 1144512 TEE PPS 16-16-16 TEE, 1144513 TEE PPS 20-20-20 TEE, 1144523 TEE PPS 25-25-25 TEE, 1144515 TEE REDUCER PPS 20-16-20, 1144517 TEE REDUCER PPS 20-16-16, 1144516 COUPLING PPS 16-16, 1144518 COUPLING PPS 20-20, 1144519 COUPLING PPS 25-25, 1144522 REDUCER PPS 20-16, 1162269 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 2X16 C/C 50MM, 1162270 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 3X16 C/C 50MM, 1162271 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 4X16 C/C 50MM, 1162272 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 1XG1/2” MT C/C 50MM, 1162273 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 1XG3/4” MT C/C 50MM, 1162276 AQUA PLUS MANIFOLD PPM 1X C/C50MM, 1162275 AQUA PLUS MANIFOLD PPM 2X C/C50MM, 1162274 AQUA PLUS MANIFOLD PPM 3X C/C50MM, 1162277 AQUA PLUS MANIFOLD PPM 1+1X C/C50MM, 1162282 AQUA PLUS Q&E ADAPTER PPS PPM 16, 1162283 AQUA PLUS Q&E ADAPTER PPM 18, 1162284 AQUA PLUS Q&E ADAPTER PPM 20, 1162290 AQUA PLUS ADAPTER MALE THREAD PPM 1" G3/4"MT, 1162294 AQUA PLUS ELBOW MALE FEMALE PPM 1"MT-1"FT, 1162293 AQUA PLUS ELBOW ADAPTER MALE PPM 1" G3/4"MT, 1162291 AQUA PLUS ADAPTER BRASS NUT PPM 1"MT-G3/4"SN, 1162292 AQUA PLUS ADAPTER BRASS NUT PPM 1"FT-3/4"SN, 1162288 AQUA PLUS OUTLET PLUG PPS PPM, 1162297 AQUA PLUS MANIFOLD PLUG PPM MT, 1162286 AQUA PLUS PPM OUTLET NUT, 1162295 AQUA PLUS NIFOLD END CAP PPM 1"FT END CAP.

Approval Holder:: Uponor GmbH

Company Name
Uponor GmbH
Address
Industriestrasse 56, Hassfurt
Postcode
97437,
Country
Germany
Phone
0034916853600
General Email
mariaisabel.fernandez@uponor.com

View All Listings by this Company

WRAS Approval Number: #2207406

Range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2207406
Note:: For above and below ground use
Size:: 20mm – 63mm.
Marking:: Aquaflow, PN & size on nut.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: 324A02520Q TEE REDUCING Aquaflow 25X20X25 324A03225Q TEE REDUCING Aquaflow 32X25X32 324A04032Q TEE REDUCING Aquaflow 40X32X40 324A05025Q TEE REDUCING Aquaflow 50X25X50 324A05040Q TEE REDUCING Aquaflow 50X40X50 324A06325Q TEE REDUCING Aquaflow 63X25X63 324A06332Q TEE REDUCING Aquaflow 63X32X63 324A06340Q TEE REDUCING Aquaflow 63X40X63 324A06350Q TEE REDUCING Aquaflow 63X50X63 320002001Q ADAPTOR MALE Aquaflow 20X1/2" 320002002Q ADAPTOR MALE Aquaflow 20X3/4" 320002003Q ADAPTOR MALE Aquaflow 20X1" 320002501Q ADAPTOR MALE Aquaflow 25X1/2" 320002502Q ADAPTOR MALE Aquaflow 25X3/4" 320002503Q ADAPTOR MALE Aquaflow 25X1" 320003201Q ADAPTOR MALE Aquaflow 32X1/2" 320003202Q ADAPTOR MALE Aquaflow 32X3/4" 320003203Q ADAPTOR MALE Aquaflow 32X1" 320003204Q ADAPTOR MALE Aquaflow 32X11/4" 320003205Q ADAPTOR MALE Aquaflow 32X11/2" 320004003Q ADAPTOR MALE Aquaflow 40X1" 320004004Q ADAPTOR MALE Aquaflow 40X11/4" 320004005Q ADAPTOR MALE Aquaflow 40X11/2" 320004006Q ADAPTOR MALE Aquaflow 40X2" 320005003Q ADAPTOR MALE Aquaflow 50X1" 320005004Q ADAPTOR MALE Aquaflow 50X11/4" 320005005Q ADAPTOR MALE Aquaflow 50X11/2" 320005006Q ADAPTOR MALE Aquaflow 50X2" 320006305Q ADAPTOR MALE Aquaflow 63X11/2" 320006306Q ADAPTOR MALE Aquaflow 63X2" 320006307Q ADAPTOR MALE Aquaflow 63X21/2" 320A02001Q ADAPTOR FEMALE Aquaflow 20X1/2" 320A02002Q ADAPTOR FEMALE Aquaflow 20X3/4" 320A02010Q ADAPTOR FEMALE Aquaflow 20X3/8" 320A02501Q ADAPTOR FEMALE Aquaflow 25X1/2" 320A02502Q ADAPTOR FEMALE Aquaflow 25X3/4" 320A02503Q ADAPTOR FEMALE Aquaflow 25X1" 320A03201Q ADAPTOR FEMALE Aquaflow 32X1/2" 320A03202Q ADAPTOR FEMALE Aquaflow 32X3/4" 320A03203Q ADAPTOR FEMALE Aquaflow 32X1" 320A03204Q ADAPTOR FEMALE Aquaflow 32X11/4" 320A03205Q ADAPTOR FEMALE Aquaflow 32X11/2" 320A04003Q ADAPTOR FEMALE Aquaflow 40X1" 320A04004Q ADAPTOR FEMALE Aquaflow 40X11/4" 320A04005Q ADAPTOR FEMALE Aquaflow 40X11/2" 320A05004Q ADAPTOR FEMALE Aquaflow 50X11/4" 320A05005Q ADAPTOR FEMALE Aquaflow 50X11/2" 320A05006Q ADAPTOR FEMALE Aquaflow 50X2" 320A06305Q ADAPTOR FEMALE Aquaflow 63X11/2" 320A06306Q ADAPTOR FEMALE Aquaflow 63X2" 320A06307Q ADAPTOR FEMALE Aquaflow 63X21/2" 320B00020Q END PLUG Aquaflow 20MM 320B00025Q END PLUG Aquaflow 25MM 320B00032Q END PLUG Aquaflow 32MM 320B00040Q END PLUG Aquaflow 40MM 320B00050Q END PLUG Aquaflow 50MM 320B00063Q END PLUG Aquaflow 63MM 321020020Q COUPLING Aquaflow 20X20 321025025Q COUPLING Aquaflow 25X25 321032032Q COUPLING Aquaflow 32X32 321040040Q COUPLING Aquaflow 40X40 321050050Q COUPLING Aquaflow 50X50 321063063Q COUPLING Aquaflow 63X63 321A02520Q REDUCING COUPLING Aquaflow 25X20 321A03220Q REDUCING COUPLING Aquaflow 32X20 321A03225Q REDUCING COUPLING Aquaflow 32X25 321A04025Q REDUCING COUPLING Aquaflow 40X25 321A04032Q REDUCING COUPLING Aquaflow 40X32 321A05025Q REDUCING COUPLING Aquaflow 50X25 321A05032Q REDUCING COUPLING Aquaflow 50X32 321A05040Q REDUCING COUPLING Aquaflow 50X40 321A06325Q REDUCING COUPLING Aquaflow 63X25 321A06332Q REDUCING COUPLING Aquaflow 63X32 321A06340Q REDUCING COUPLING Aquaflow 63X40 321A06350Q REDUCING COUPLING Aquaflow 63X50 322020020Q ELBOW 90 Aquaflow 20X20 322025025Q ELBOW 90 Aquaflow 25X25 322032032Q ELBOW 90 Aquaflow 32X32 322040040Q ELBOW 90 Aquaflow 40X40 322050050Q ELBOW 90 Aquaflow 50X50 322063063Q ELBOW 90 Aquaflow 63X63 322A02001Q ELBOW THREADED MALE Aquaflow 20X1/2" 322A02002Q ELBOW THREADED MALE Aquaflow 20X3/4" 322A02501Q ELBOW THREADED MALE Aquaflow 25X1/2" 322A02502Q ELBOW THREADED MALE Aquaflow 25X3/4" 322A02503Q ELBOW THREADED MALE Aquaflow 25X1" 322A03202Q ELBOW THREADED MALE Aquaflow 32X3/4" 322A03203Q ELBOW THREADED MALE Aquaflow 32X1" 322A04004Q ELBOW THREADED MALE Aquaflow 40X11/4" 322A04005Q ELBOW THREADED MALE Aquaflow 40X11/2" 322A05005Q ELBOW THREADED MALE Aquaflow 50X11/2" 322A05006Q ELBOW THREADED MALE Aquaflow 50X2" 322A06306Q ELBOW THREADED MALE Aquaflow 63X2" 322A06307Q ELBOW THREADED MALE Aquaflow 63X21/2" 322B02001Q ELBOW THREADED FEMALE Aquaflow 20X1/2" 322B02002Q ELBOW THREADED FEMALE Aquaflow 20X3/4" 322B02501Q ELBOW THREADED FEMALE Aquaflow 25X1/2" 322B02502Q ELBOW THREADED FEMALE Aquaflow 25X3/4" 322B02503Q ELBOW THREADED FEMALE Aquaflow 25X1" 322B03201Q ELBOW THREADED FEMALE Aquaflow 32X1/2" 322B03202Q ELBOW THREADED FEMALE Aquaflow 32X3/4" 322B03203Q ELBOW THREADED FEMALE Aquaflow 32X1" 322B04004Q ELBOW THREADED FEMALE Aquaflow 40X11/4" 322B04005Q ELBOW THREADED FEMALE Aquaflow 40X11/2" 322B05005Q ELBOW THREADED FEMALE Aquaflow 50X11/2" 322B05006Q ELBOW THREADED FEMALE Aquaflow 50X2" 322B06306Q ELBOW THREADED FEMALE Aquaflow 63X2" 322B06307Q ELBOW THREADED FEMALE Aquaflow 63X21/2" 322C02501Q ELBOW POP-UP Aquaflow 25X25X1/2 322C03201Q ELBOW POP-UP Aquaflow 32X32X1/2 322C03202Q ELBOW POP-UP Aquaflow 32X32X3/4 322D02001Q WALL ELBOW F Aquaflow 20X1/2 COMPRESSION 322D02501Q WALL ELBOW F Aquaflow 25X1/2 COMPRESSION 322D02502Q WALL ELBOW F Aquaflow 25X3/4 COMPRESSION 323002001Q TEE THREADED FEMALE Aquaflow 20X1/2"X20 323002002Q TEE THREADED FEMALE Aquaflow 20X3/4"X20 323002501Q TEE THREADED FEMALE Aquaflow 25X1/2"X25 323002502Q TEE THREADED FEMALE Aquaflow 25X3/4"X25 323002503Q TEE THREADED FEMALE Aquaflow 25X1"X25 323003201Q TEE THREADED FEMALE Aquaflow 32X1/2"X32 323003202Q TEE THREADED FEMALE Aquaflow 32X3/4"X32 323003203Q TEE THREADED FEMALE Aquaflow 32X1"X32 323004004Q TEE THREADED FEMALE Aquaflow 40X11/4"X40 323004005Q TEE THREADED FEMALE Aquaflow 40X11/2"X40 323005005Q TEE THREADED FEMALE Aquaflow 50X11/2"X50 323005006Q TEE THREADED FEMALE Aquaflow 50X2"X50 323006306Q TEE THREADED FEMALE Aquaflow 63X2"X63 323006307Q TEE THREADED FEMALE Aquaflow 63X21/2"X63 323A02001Q TEE THREADED MALE Aquaflow 20X1/2"X20 323A02002Q TEE THREADED MALE Aquaflow 20X3/4"X20 323A02003Q TEE THREADED MALE Aquaflow 20X1"X20 323A02501Q TEE THREADED MALE Aquaflow 25X1/2"X25 323A02502Q TEE THREADED MALE Aquaflow 25X3/4"X25 323A02503Q TEE THREADED MALE Aquaflow 25X1"X25 323A03201Q TEE THREADED MALE Aquaflow 32X1/2"X32 323A03202Q TEE THREADED MALE Aquaflow 32X3/4"X32 323A03203Q TEE THREADED MALE Aquaflow 32X1"X32 323A04003Q TEE THREADED MALE Aquaflow 40X1"X40 323A04004Q TEE THREADED MALE Aquaflow 40X11/4"X40 323A04005Q TEE THREADED MALE Aquaflow 40X11/2"X40 323A05005Q TEE THREADED MALE Aquaflow 50X11/2"X50 323A05006Q TEE THREADED MALE Aquaflow 50X2"X50 323A06306Q TEE THREADED MALE Aquaflow 63X2"X63 323C03202Q CROSS TEE Aquaflow 32X3/4X3/4X32 324020020Q TEE 90° Aquaflow 20X20X20 324025025Q TEE 90° Aquaflow 25X25X25 324032032Q TEE 90° Aquaflow 32X32X32 324040040Q TEE 90° Aquaflow 40X40X40 324050050Q TEE 90° Aquaflow 50X50X50 324063063Q TEE 90° Aquaflow 63X63X63 324B02025Q TEE INCREASING Aquaflow 20Χ25Χ20MM 324B02532Q TEE INCREASING Aquaflow 25Χ32Χ25MM 320C05005Q FLANGED ADAPTOR Aquaflow 50X11/2 320C05006Q FLANGED ADAPTOR Aquaflow 50X2 320C06306Q FLANGED ADAPTOR Aquaflow 63X2 320C06307Q FLANGED ADAPTOR Aquaflow 63X21/2 320D05005Q FLANGED ADAPTOR Aquaflow 50X11/2 (4 B) 320D05006Q FLANGED ADAPTOR Aquaflow 50X2 (4 B) 320D06306Q FLANGED ADAPTOR Aquaflow 63X2 (4 B) 320D06307Q FLANGED ADAPTOR Aquaflow 63X21/2 (4 B) 321B00025Q REPAIR COUPLING Aquaflow 25X25 321B00032Q REPAIR COUPLING Aquaflow 32X32 321B00040Q REPAIR COUPLING Aquaflow 40X40 321B00050Q REPAIR COUPLING Aquaflow 50X50 321B00063Q REPAIR COUPLING Aquaflow 63X63 321C02522Q CONVERSION REDUCER Aquaflow 25X22 321C03222Q CONVERSION REDUCER Aquaflow 32X22 321C03228Q CONVERSION REDUCER Aquaflow 32X28 321D02725 GLOBAL TRANSITION COUPL. Aquaflow 20/27X25 321D02732 GLOBAL TRANSITION COUPL. Aquaflow 20/27X32 321D03425 GLOBAL TRANSITION COUPL. Aquaflow 27/34X25 321D03432 GLOBAL TRANSITION COUPL. Aquaflow 27/34X32 Models added September 2025 322B03203Q ELBOW THREADED FEMALE Aquaflow 32 X 1" 322B03204Q ELBOW THREADED FEMALE Aquaflow 32 Χ 1 1/4" 322B04003Q ELBOW THREADED FEMALE Aquaflow 40X1" 321D02720 GLOBAL TRANSITION COUPLING Aquaflow 19-27 / 20 323A03204Q TEE THREADED MALE Aquaflow 32X1 1/4"X32 323003204Q TEE THREADED FEMALE Aquaflow 32X1 1/4"X32 323004003Q TEE THREADED FEMALE Aquaflow 40X1"X40 Where XXX-YYY-ZZZ for product family codes with only 3 digits 320 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) suffix 'Q' Xxx(x)-yyy-zz for product family codes with a letter as a firth digit & suffix 'Q' 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter - suffix 'Q'

Approval Holder:: Kalsi Plastics (UK) Limited

Company Name
Kalsi Plastics (UK) Limited
Address
Kalsi House 5 Tomey Road Sparkhill Birmngham
Postcode
B11 2NJ
Country
United Kingdom
General Email
sales@kalsiplastics.co.uk

View All Listings by this Company

WRAS Approval Number: #251115002

Range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251115002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F),
Marking:: Brymec & arrow logo, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.
Installation Requirements:: R001
Expiry date:: 30/11/2030
Model:: Equal Straight Union (16mm - 32mm): 51019 ∙ 16mm Brass Coupler Multilayer Crimp Fitting 51020 ∙ 20mm Brass Coupler Multilayer Crimp Fitting 51018 ∙ 25mm Brass Coupler Multilayer Crimp Fitting 51022 ∙ 32mm Brass Coupler Multilayer Crimp Fitting Unequal Straight Union (20mmx16mm - 32mmx26mm): 51028 ∙ 20x16mm Reducing Coupler Multilayer Crimp Fitting 51040 ∙ 25x16mm Reducing Coupler Multilayer Crimp Fitting 51038 ∙ 25x20mm Reducing Coupler Multilayer Crimp Fitting 51031 ∙ 32x16mm Reducing Coupler Multilayer Crimp Fitting 51032 ∙ 32x20mm Reducing Coupler Multilayer Crimp Fitting 51039 ∙ 32x25mm Reducing Coupler Multilayer Crimp Fitting Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51081 ∙ 16mm x 1/2" Male Iron Multilayer Crimp Coupler 51083 ∙ 20mm x 1/2" Male Iron Multilayer Crimp Coupler 51084 ∙ 20mm x 3/4" Male Iron Multilayer Crimp Coupler 51082 ∙ 25mm x 3/4" Male Iron Multilayer Crimp Fitting 51085 ∙ 25mm x 1" Male Iron Multilayer Crimp Fitting 51088 ∙ 32mm x 1" Male Iron Multilayer Crimp Coupler Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): 51067 ∙ 16mm x 1/2" Female Iron Multilayer Crimp Coupler 51069 ∙ 20mm x 1/2" Female Iron Multilayer Crimp Coupler 51070 ∙ 20mm x 3/4" Female Iron Multilayer Crimp Coupler 51095 ∙ 25mm x 3/4" Female Iron Multilayer Crimp Fitting 51068 ∙ 25mm x 1" Female Iron Multilayer Crimp Fitting 51073 ∙ 32mm x 1" Female Iron Multilayer Crimp Coupler Equal Elbows (16mm - 32mm): 51044 ∙ 16mm Brass 90 Elbow Multilayer Crimp Fitting 51045 ∙ 20mm Brass 90 Elbow Multilayer Crimp Fitting 51043 ∙ 25mm Brass 90 Elbow Multilayer Crimp Fitting 51047 ∙ 32mm Brass 90 Elbow Multilayer Crimp Fitting Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51096 ∙ 16mm x 1/2" Male Iron Elbow Multilayer Crimp Fitting 51098 ∙ 20mm x 3/4" Male Iron Elbow Multilayer Crimp Fitting 51099 ∙ 25mm x 1" Male Iron Elbow Multilayer Crimp Fitting Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): 51096 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51108 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51109 ∙ 20mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51105 ∙ 25mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51106 ∙ 25mm x 1" Female Iron Elbow Multilayer Crimp Fitting Equal Tees (16mm - 32mm): 51058 ∙ 16mm Brass Equal Tee Multilayer Crimp Fitting 51059 ∙ 20mm Brass Equal Tee Multilayer Crimp Fitting 51042 ∙ 25mm Brass Equal Tee Multilayer Crimp Fitting 51061 ∙ 32mm Brass Equal Tee Multilayer Crimp Fitting Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): 51140 ∙ 16x16x20mm Reducing Ends Tee Multilayer Crimp 51142 ∙ 20x16x16mm Reducing End & Branch Tee Multilayer Crimp 51121 ∙ 20x20x16mm Reducing Branch Tee Multilayer Crimp 51137 ∙ 20x20x25mm Reducing Ends Tee Multilayer Crimp 51124 ∙ 25x25x16mm Reducing Branch Tee Multilayer Crimp 51147 ∙ 25x20x20mm Reducing End & Branch Tee Multilayer Crimp 51125 ∙ 25x25x20mm Reducing Branch TEE Multilayer Crimp 51129 ∙ 32x32x20mm Reducing Branch Tee Multilayer Crimp 51130 ∙ 32x32x25mm Reducing Branch Tee Multilayer Crimp Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): 51155 ∙ 16mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51156 ∙ 20mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51157 ∙ 25mm x 3/4" Female Iron Branch Tee Multilayer Crimp Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): 51171 ∙ 16mm x 1/2" Backplate Elbow Multilayer Crimp 51173 ∙ 20mm x 3/4" Backplate Elbow Multilayer Crimp. _________

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #260202004

Range of polypropylene push-fit fittings. The 20, 25 and 32mm sizes are for use with MDPE Pipe (manufactured to BS EN 12201-2). The 15, 22 and 28mm connections are for use with the following pipes: PEX (manufactured to BS 7291-3) for 15, 22 and 28mm sizes. PB (manufactured to BS 7291-2) and Copper (manufactured to BS EN 1057) for 15 and 22mm sizes only. Maximum working pressures: UG601B model: 16.0 bar. All other models: 12.5 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 260202004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The blue (UTS) and beige (TSM) pipe inserts must be used to maintain the validity of this approval.
Size:: See model.
Marking:: PN, JG & size on body. JG on pipe inserts.
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: Couplers: UG601B: 20 x 15MM PE-COPPER COUPLER, UG602B: 25 x 22Mm PE-COPPER COUPLER, UG603B: 25 x 15MM PE-COPPER COUPLER, UG604B: 32 x 28MM PE-COPPER COUPLER, UG063228B: 32 x 28MM REDUCER. Pipe inserts (blue) for use with MDPE pipe: UTS147-DB 20MM pipe insert, UTS197-DB 25MM pipe insert, UTS251-DB 32MM pipe insert. Pipe inserts (beige) for use with PB or PEX pipe: TSM15N 15MM pipe insert, TSM22N 22MM pipe insert. Pipe inserts (beige) for use with PEX pipe: TSM28N 28MM pipe insert.

Approval Holder:: Reliance Worldwide Corporation (UK) Ltd

Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #251002020

Range of ultrasonic dry type water meters with brass bodies. Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: BAYLAN, model number and other technical information on meter face. Flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: ST-15. DN15 - thread size ¾” BSP (M). Lengths - 110mm, 115mm, 130mm, 145mm, 165mm, 170mm, 190mm. ST-20. DN20 - thread size 1” BSP (M). Lengths - 110mm, 115mm, 130mm, 135mm, 165mm, 175mm, 190mm, 200mm, 220mm. ST-25. DN25 - thread size 1 ¼” BSP (M). Lengths - 175mm, 199mm, 200mm, 210mm, 225mm. ST-32. DN32 - thread size 1 ½” BSP (M). Lengths - 110mm, 150mm, 175mm, 199mm, 200mm ST-40. DN40 - thread size 2” BSP (M). Lengths - 200mm, 220mm.

Approval Holder:: BAYLAN OLCU ALETLERI SAN. TICARET

Company Name
BAYLAN OLCU ALETLERI SAN. TICARET
Address
ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company
Manufacturer:: BAYLAN OLCU ALETLERI SAN. TICARET

Company Name
BAYLAN OLCU ALETLERI SAN. TICARET
Address
ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

WRAS Approval Number: #251015007

‘BECO Y’ range of ultrasonic water meters with plastic bodies, plastic transducers and silicone ‘O’-rings. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Company logo (BOVE TECHNOLOGY), BECO Y, Size, Q3, MAP and manufacturing date (YYYY.MM) on meter face. Bove on meter cover. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: BECO Y DN15 (110MM): BSP ¾” (M) x BSP ¾” (M), BECO Y DN20 (130MM): BSP 1” (M) x BSP 1” (M), BECO Y DN20 (190MM): BSP 1” (M) x BSP 1” (M).

Approval Holder:: Zhejiang Bove Intelligent Technology Co., Ltd

Company Name
Zhejiang Bove Intelligent Technology Co., Ltd
Address
Building 23, No.36, Changsheng South Road, Jiaxing, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Bove Intelligent Technology Co., Ltd

Company Name
Zhejiang Bove Intelligent Technology Co., Ltd
Address
Level 5, Building 5, No.36, Changsheng South Road, Jiaxing, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #251015013

Range of brass bodied threaded fittings and a brass end feed fitting (C04069H00081A model only). The CL08069H192B4 model is chrome plated. The C04069H00081A model end feed fitting is for use with copper pipe (manufactured to EN 1057). The C04149H00191A model incorporates a plastic flow straightener. Maximum working pressure 10.0 bar, except for the C04149H00190A and C04149H00191A models which are open outlet use only. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: AVONFLOW and WRAS on body.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: C04149H00190A - 3/4 Brass Hose Union Nut & Tail: 7/8” BSP (F) inlet x 19.5mm barbed outlet, C04149H00191A - 1/2 Brass Hose Union Nut & Tail: 3/4” BSP (F) x 15.6mm barbed outlet, CL08069H185W2 - Brass Flange Plug 1/4 Bp14: 1/4" BSP (M), CL08069H186W2 - Brass Flanged Plug 3/8 Bp38: 3/8” BSP (M), CL08069H187W2 - Brass Flanged Plug 1/2 Bp12: 1/2" BSP (M), CL08069H188W2 - BRASS FLANGED PLUG 3/4" BP34: 3/4” BSP (M), CL08069H189W2 - Brass Flanged Plug 1 Bp1: 1” BSP (M), CL08069H190W2 - Brass Flange Plug 11/2 Bp112: 1-1/2" BSP (M), CL08069H183W2 - Brass Flanged Plug 1 1/4 Bp114: 1-1/4" BSP (M), CL41039H247W2 - Brass Hexagon Bush 1/4 X 1/8 Bb1418: 1/4” BSP (M) x 1/8” BSP (F), CL41039H228W2 - Brass Hexagon Bush 3/8 X 1/4 Bb3814: 3/8” BSP (M) x 1/4” BSP (F), CL41039H229W2 - Brass Hex Bush 1/2 X 1/8 Bb1218: 1/2” BSP (M) x 1/8” BSP (F), CL41039H230W2 - Brass Hexagon Bush 1/2 X 1/4 Bb1214: 1/2” BSP (M) x 1/4” BSP (F), CL41039H231W2 - Brass Hexagon Bush 1/2 X 3/8 Bb1238: 1/2” BSP (M) x 3/8” BSP (F), CL41039H232W2 - Brass Hexagon Bush 3/4 X 1/2 Bb3412: 3/4” BSP (M) x 1/2” BSP (F), CL41039H233W2 - Brass Hex Bush 1 X 1/2 Bb112: 1” BSP (M) x 1/2” BSP (F), CL41039H234W2 - Brass Hexagon Bush 1 X 3/4 Bb134: 1” BSP (M) x 3/4” BSP (F), CL41039H235W2 - Brass Hexagon Bush 1 1/4 X 1/2 Bb11412: 1-1/4” BSP (M) x 1/2” BSP (F), CL41039H236W2 - Brass Hexagon Bush 1 1/4 X 3/4 Bb11434: 1-1/4” BSP (M) x 3/4” BSP (F), CL41039H239W2 - Brass Hexagon Bush 1 1/4 X 1 Bb1141: 1-1/4” BSP (M) x 1” BSP (F), CL41039H240W2 - Brass Hexagon Bush 1 1/2 X 1/2 Bb11212: 1-1/2” BSP (M) x 1/2” BSP (F), CL41039H241W2 - Brass Hexagon Bush 1 1/2 X 1 Bb1121: 1-1/2” BSP (M) x 1” BSP (F), CL41039H242W2 - Brass Hex Bush 1 1/2 X 1 1/4 Bb112114: 1-1/2” BSP (M) x 1-1/4” BSP (F), CL41039H243W2 - Brass Hexagon Bush 2 X 1 Bb21: 2” BSP (M) x 1” BSP (F), CL41039H244W2 - Brass Hexagon Bush 2 X 1 1/4 Bb2114: 2” BSP (M) x 1-1/4” BSP (F), CL41039H245W2 - Brass Hexagon Bush 2 X 1 1/2 Bb2112: 2” BSP (M) x 1-1/2” BSP (F), CL08019H381W2 - Brass Socket 1/2 Bs12: 1/2” BSP (F), CL08019H382W2 - Brass Socket 3/4 Bs34: 3/4” BSP (F), CL08019H383W2 - Brass Socket 1 Bs1: 1” BSP (F), CL08019H384W2 - PLUMBRIGHT BRASS HEXAGON NIPPLE 1/4": 1/4” BSP (M), CL08019H385W2 - Brass Hexagon Nipple 1/2 Bn12: 1/2” BSP (M), CL08019H386W2 - Brass Hexagon Nipple 3/4 Bn34: 3/4” BSP (M), CL08019H387W2 - Brass Hexagon Nipple 1 Bn1: 1” BSP (M), CL41039H237W2 - Brass Hexagon Nipple 3/8 Bn38: 3/8” BSP (M), CL41039H238W2 - Brass Tap Extension Mxf 1/2 Be12: 1/2” BSP (F) x 1/2” BSP (M), CL08019H389A2 - PLUMBRIGHT BRASS BARREL NIPPLE 3/8": 3/8” BSP (M), CL08019H390A2 - PLUMBRIGHT BRASS BARREL NIPPLE 1/2": 1/2” BSP (M), CL08019H391A2 - PLUMBRIGHT BRASS BARREL NIPPLE 3/4": 3/4” BSP (M), CL08019H392A2 - PLUMBRIGHT BRASS BARREL NIPPLE 1": 1” BSP (M), CL08069H192B4 - Brass Cap-Cp 1/2 Cpbc12: 1/2” BSP (F), CL08069H193W2 - Brass Cap 1/4 Bc14: 1/4” BSP (F), CL08069H194W2 - Brass Cap 3/8 Bc38: 3/8” BSP (F), CL08069H192W2 - Brass Cap 1/2 Bc12: 1/2” BSP (F), CL08069H195W2 - Brass Cap 3/4 Bc34: 3/4” BSP (F), CL08069H196W2 - Brass Cap 1 Bc1: 1” BSP (F), C04069H00081A - P/R END FEED AIR RELEASE STOP END 15MM: 15mm.

Approval Holder:: Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name
Jiangxi Avonflow Hvac Tech Co., Ltd
Address
No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province
Country
China

View All Listings by this Company
Manufacturer:: Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name
Jiangxi Avonflow Hvac Tech Co., Ltd
Address
No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province
Country
China

View All Listings by this Company

WRAS Approval Number: #251106001

Range of stainless steel bodied mechanical pump shaft seals. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 251106001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: For installation into specifically dimensioned pumps.
Size:: Suitable for shaft sizes from 25 mm up to 195 mm.
Marking:: “Chesterton”; “442” on body.
Installation Requirements:: R001
Expiry date:: 30/11/2030
Model:: 442C – Cartridge split mechanical seal (for shaft sizes from 25 mm up to 120 mm), 442C XL– Cartridge split mechanical seal (for shaft sizes from 125 mm up to 195 mm).

Approval Holder:: Chesterton International GmbH

Company Name
Chesterton International GmbH
Address
Am Lenzenfleck 23, DE-85737 Ismaning
Country
Germany

View All Listings by this Company